Implement -Zlink-directives=yes/no
`-Zlink-directives=no` will ignored `#[link]` directives while compiling a crate, so nothing is emitted into the crate's metadata. The assumption is that the build system already knows about the crate's native dependencies and can provide them at link time without these directives.
This is another way to address issue # #70093, which is currently addressed by `-Zlink-native-libraries` (implemented in #70095). The latter is implemented at link time, which has the effect of ignoring `#[link]` in *every* crate. This makes it a very large hammer as it requires all native dependencies to be known to the build system to be at all usable, including those in sysroot libraries. I think this means its effectively unused, and definitely under-used.
Being able to control this on a crate-by-crate basis should make it much easier to apply when needed.
I'm not sure if we need both mechanisms, but we can decide that later.
cc `@pcwalton` `@cramertj`
`-Zlink-directives=no` will ignored `#[link]` directives while compiling a
crate, so nothing is emitted into the crate's metadata. The assumption is
that the build system already knows about the crate's native dependencies
and can provide them at link time without these directives.
This is another way to address issue # #70093, which is currently addressed
by `-Zlink-native-libraries` (implemented in #70095). The latter is
implemented at link time, which has the effect of ignoring `#[link]`
in *every* crate. This makes it a very large hammer as it requires all
native dependencies to be known to the build system to be at all usable,
including those in sysroot libraries. I think this means its effectively
unused, and definitely under-used.
Being able to control this on a crate-by-crate basis should make it much
easier to apply when needed.
I'm not sure if we need both mechanisms, but we can decide that later.
errors: generate typed identifiers in each crate
Instead of loading the Fluent resources for every crate in `rustc_error_messages`, each crate generates typed identifiers for its own diagnostics and creates a static which are pulled together in the `rustc_driver` crate and provided to the diagnostic emitter.
There are advantages and disadvantages to this change..
#### Advantages
- Changing a diagnostic now only recompiles the crate for that diagnostic and those crates that depend on it, rather than `rustc_error_messages` and all crates thereafter.
- This approach can be used to support first-party crates that want to supply translatable diagnostics (e.g. `rust-lang/thorin` in https://github.com/rust-lang/rust/pull/102612#discussion_r985372582, cc `@JhonnyBillM)`
- We can extend this a little so that tools built using rustc internals (like clippy or rustdoc) can add their own diagnostic resources (much more easily than those resources needing to be available to `rustc_error_messages`)
#### Disadvantages
- Crates can only refer to the diagnostic messages defined in the current crate (or those from dependencies), rather than all diagnostic messages.
- `rustc_driver` (or some other crate we create for this purpose) has to directly depend on *everything* that has error messages.
- It already transitively depended on all these crates.
#### Pending work
- [x] I don't know how to make `rustc_codegen_gcc`'s translated diagnostics work with this approach - because `rustc_driver` can't depend on that crate and so can't get its resources to provide to the diagnostic emission. I don't really know how the alternative codegen backends are actually wired up to the compiler at all.
- [x] Update `triagebot.toml` to track the moved FTL files.
r? `@compiler-errors`
cc #100717
Extend `CodegenBackend` trait with a function returning the translation
resources from the codegen backend, which can be added to the complete
list of resources provided to the emitter.
Signed-off-by: David Wood <david.wood@huawei.com>
Instead of loading the Fluent resources for every crate in
`rustc_error_messages`, each crate generates typed identifiers for its
own diagnostics and creates a static which are pulled together in the
`rustc_driver` crate and provided to the diagnostic emitter.
Signed-off-by: David Wood <david.wood@huawei.com>
Use a lock-free datastructure for source_span
follow up to the perf regression in https://github.com/rust-lang/rust/pull/105462
The main regression is likely the CStore, but let's evaluate the perf impact of this on its own
remove unstable `pick_stable_methods_before_any_unstable` flag
This flag was only added in #90329 in case there was any issue with the impl so that it would be easy to tell nightly users to use the flag to disable the new logic to fix their code. It's now been enabled for two years and also I can't find any issues corresponding to this new functionality? This flag made it way harder to understand how this code works so it would be nice to remove it and simplify what's going on.
cc `@nbdd0121`
r? `@oli-obk`
Add `kernel-address` sanitizer support for freestanding targets
This PR adds support for KASan (kernel address sanitizer) instrumentation in freestanding targets. I included the minimal set of `x86_64-unknown-none`, `riscv64{imac, gc}-unknown-none-elf`, and `aarch64-unknown-none` but there's likely other targets it can be added to. (`linux_kernel_base.rs`?) KASan uses the address sanitizer attributes but has the `CompileKernel` parameter set to `true` in the pass creation.
Implement partial support for non-lifetime binders
This implements support for non-lifetime binders. It's pretty useless currently, but I wanted to put this up so the implementation can be discussed.
Specifically, this piggybacks off of the late-bound lifetime collection code in `rustc_hir_typeck::collect::lifetimes`. This seems like a necessary step given the fact we don't resolve late-bound regions until this point, and binders are sometimes merged.
Q: I'm not sure if I should go along this route, or try to modify the earlier nameres code to compute the right bound var indices for type and const binders eagerly... If so, I'll need to rename all these queries to something more appropriate (I've done this for `resolve_lifetime::Region` -> `resolve_lifetime::ResolvedArg`)
cc rust-lang/types-team#81
r? `@ghost`
Most tests involving save-analysis were removed, but I kept a few where
the `-Zsave-analysis` was an add-on to the main thing being tested,
rather than the main thing being tested.
For `x.py install`, the `rust-analysis` target has been removed.
For `x.py dist`, the `rust-analysis` target has been kept in a
degenerate form: it just produces a single file `reduced.json`
indicating that save-analysis has been removed. This is necessary for
rustup to keep working.
Closes#43606.
Introduce `-Zterminal-urls` to use OSC8 for error codes
Terminals supporting the OSC8 Hyperlink Extension can support inline anchors where the text is user defineable but clicking on it opens a browser to a specified URLs, just like `<a href="URL">` does in HTML.
https://gist.github.com/egmontkob/eb114294efbcd5adb1944c9f3cb5feda
Resolve documentation links in rustc and store the results in metadata
This PR implements MCP https://github.com/rust-lang/compiler-team/issues/584.
Doc links are now resolved in rustc and stored into metadata, so rustdoc simply retrieves them through a query (local or extern),
Code that is no longer used is removed, and some code that no longer needs to be public is privatized.
The removed code includes resolver cloning, so this PR fixes https://github.com/rust-lang/rust/issues/83761.
Terminals supporting the OSC8 Hyperlink Extension can support inline
anchors where the text is user defineable but clicking on it opens a
browser to a specified URLs, just like `<a href="URL">` does in HTML.
https://gist.github.com/egmontkob/eb114294efbcd5adb1944c9f3cb5feda
This is somewhat important because LLVM enables the pass based on
target architecture, but support by the target OS also matters.
For example, XRay attributes are processed by codegen for macOS
targets, but Apple linker fails to process relocations in XRay
data sections, so the feature as a whole is not supported there
for the time being.
Recognize all bells and whistles that LLVM's XRay pass is capable of.
The always/never settings are a bit dumb without attributes but they're
still there. The default instruction count is chosen by the compiler,
not LLVM pass. We'll do it later.
Especially when trying to diagnose runaway future sizes, it might be
more intuitive to sort the variants according to the control flow
(aka their yield points) rather than the size of the variants.
Forward the `Display` implementation for `CrateType` to
`IntoDiagnosticArg` so that it can be used in diagnostic structs.
Signed-off-by: David Wood <david.wood@huawei.com>
Output tree representation on thir-tree
The current output of `-Zunpretty=thir-tree` is really cumbersome to work with, using an actual tree representation should make it easier to see what the thir looks like.
Use stable metric for const eval limit instead of current terminator-based logic
This patch adds a `MirPass` that inserts a new MIR instruction `ConstEvalCounter` to any loops and function calls in the CFG. This instruction is used during Const Eval to count against the `const_eval_limit`, and emit the `StepLimitReached` error, replacing the current logic which uses Terminators only.
The new method of counting loops and function calls should be more stable across compiler versions (i.e., not cause crates that compiled successfully before, to no longer compile when changes to the MIR generation/optimization are made).
Also see: #103877
core: Support variety of atomic widths in width-agnostic functions
Before this change, the following functions and macros were annotated with `#[cfg(target_has_atomic = "8")]` or
`#[cfg(target_has_atomic_load_store = "8")]`:
* `atomic_int`
* `strongest_failure_ordering`
* `atomic_swap`
* `atomic_add`
* `atomic_sub`
* `atomic_compare_exchange`
* `atomic_compare_exchange_weak`
* `atomic_and`
* `atomic_nand`
* `atomic_or`
* `atomic_xor`
* `atomic_max`
* `atomic_min`
* `atomic_umax`
* `atomic_umin`
However, none of those functions and macros actually depend on 8-bit width and they are needed for all atomic widths (16-bit, 32-bit, 64-bit etc.). Some targets might not support 8-bit atomics (i.e. BPF, if we would enable atomic CAS for it).
This change fixes that by removing the `"8"` argument from annotations, which results in accepting the whole variety of widths.
Fixes#106845Fixes#106795
Signed-off-by: Michal Rostecki <vadorovsky@gmail.com>
Atomic operations for different widths (8-bit, 16-bit, 32-bit etc.) are
guarded by `target_has_atomic = "value"` symbol (i.e. `target_has_atomic
= "8"`) (and the other derivatives), but before this change, there was
no width-agnostic symbol indicating a general availability of atomic
operations.
This change introduces:
* `target_has_atomic_load_store` symbol when atomics for any integer
width are supported by the target.
* `target_has_atomic` symbol when also CAS is supported.
Fixes#106845
Signed-off-by: Michal Rostecki <vadorovsky@gmail.com>
- Remove logic that limits const eval based on terminators, and use the
stable metric instead (back edges + fn calls)
- Add unstable flag `tiny-const-eval-limit` to add UI tests that do not
have to go up to the regular 2M step limit
Various cleanups around pre-TyCtxt queries and functions
part of #105462
based on https://github.com/rust-lang/rust/pull/106776 (everything starting at [0e2b39f](0e2b39fd1f) is new in this PR)
r? `@petrochenkov`
I think this should be most of the uncontroversial part of #105462.
The optimization that removes artifacts when building libraries is correct
from the compiler's perspective but not from a debugger's perspective.
Unpacked split debuginfo is referred to by filename and debuggers need
the artifact that contains debuginfo to continue to exist at that path.
Ironically the test expects the correct behavior but it was not running.
Disable "split dwarf inlining" by default.
This matches clang's behavior and makes split-debuginfo behave as expected (i.e. actually split the debug info).
Fixes#106592
Add default and latest stable edition to --edition in rustc (attempt 2)
Fixes#106041
No longer leaks string like my first attempt PR, #106094 - uses LazyLock to construct a `&'static str`
It will now output the default edition and latest stable edition in the help message for the `--edition` flag.
Going to request the same reviewer as the first attempt for continuity - r? `@Nilstrieb`
This allows analyzing the output programatically; for example, finding
the item with the highest `total_estimate`.
I also took the liberty of adding `untracked` tests to `rustc_session` and documentation to the unstable book for `dump-mono-items`.
Encode spans relative to the enclosing item -- enable on nightly
Follow-up to #84373 with the flag `-Zincremental-relative-spans` set by default.
This PR seeks to remove one of the main shortcomings of incremental: the handling of spans.
Changing the contents of a function may require redoing part of the compilation process for another function in another file because of span information is changed.
Within one file: all the spans in HIR change, so typechecking had to be re-done.
Between files: spans of associated types/consts/functions change, so type-based resolution needs to be re-done (hygiene information is stored in the span).
The flag `-Zincremental-relative-spans` encodes local spans relative to the span of an item, stored inside the `source_span` query.
Trap: stashed diagnostics are referenced by the "raw" span, so stealing them requires to remove the span's parent.
In order to avoid too much traffic in the span interner, span encoding uses the `ctxt_or_tag` field to encode:
- the parent when the `SyntaxContext` is 0;
- the `SyntaxContext` when the parent is `None`.
Even with this, the PR creates a lot of traffic to the Span interner, when a Span has both a LocalDefId parent and a non-root SyntaxContext. They appear in lowering, when we add a parent to all spans, including those which come from macros, and during inlining when we mark inlined spans.
The last commit changes how queries of `LocalDefId` manage their cache. I can put this in a separate PR if required.
Possible future directions:
- validate that all spans are marked in HIR validation;
- mark macro-expanded spans relative to the def-site and not the use-site.
Remove wrapper functions for some unstable options
They are trivial and just forward to the option. Like most other options, we can just access it directly.
Using that options basically changes all stable hashes we may compute.
Adding/removing as UNTRACKED it makes everything ICE (unstable fingerprint
everywhere). As TRACKED, it can still do its job without ICEing.
Refine when invalid prefix case error arises
Fix cases where the "invalid base prefix for number literal" error arises with suffixes that look erroneously capitalized but which are actually invalid.
Fix cases where the "invalid base prefix for number literal" error arises with
suffixes that look erroneously capitalized but which are in fact invalid.
Rollup of 10 pull requests
Successful merges:
- #98391 (Reimplement std's thread parker on top of events on SGX)
- #104019 (Compute generator sizes with `-Zprint_type_sizes`)
- #104512 (Set `download-ci-llvm = "if-available"` by default when `channel = dev`)
- #104901 (Implement masking in FileType comparison on Unix)
- #105082 (Fix Async Generator ABI)
- #105109 (Add LLVM KCFI support to the Rust compiler)
- #105505 (Don't warn about unused parens when they are used by yeet expr)
- #105514 (Introduce `Span::is_visible`)
- #105516 (Update cargo)
- #105522 (Remove wrong note for short circuiting operators)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Add LLVM KCFI support to the Rust compiler
This PR adds LLVM Kernel Control Flow Integrity (KCFI) support to the Rust compiler. It initially provides forward-edge control flow protection for operating systems kernels for Rust-compiled code only by aggregating function pointers in groups identified by their return and parameter types. (See llvm/llvm-project@cff5bef.)
Forward-edge control flow protection for C or C++ and Rust -compiled code "mixed binaries" (i.e., for when C or C++ and Rust -compiled code share the same virtual address space) will be provided in later work as part of this project by identifying C char and integer type uses at the time types are encoded (see Type metadata in the design document in the tracking issue #89653).
LLVM KCFI can be enabled with -Zsanitizer=kcfi.
Thank you again, `@bjorn3,` `@eddyb,` `@nagisa,` and `@ojeda,` for all the help!
This commit adds LLVM Kernel Control Flow Integrity (KCFI) support to
the Rust compiler. It initially provides forward-edge control flow
protection for operating systems kernels for Rust-compiled code only by
aggregating function pointers in groups identified by their return and
parameter types. (See llvm/llvm-project@cff5bef.)
Forward-edge control flow protection for C or C++ and Rust -compiled
code "mixed binaries" (i.e., for when C or C++ and Rust -compiled code
share the same virtual address space) will be provided in later work as
part of this project by identifying C char and integer type uses at the
time types are encoded (see Type metadata in the design document in the
tracking issue #89653).
LLVM KCFI can be enabled with -Zsanitizer=kcfi.
Co-authored-by: bjorn3 <17426603+bjorn3@users.noreply.github.com>
Detect long types in E0308 and write them to disk
On type error with long types, print an abridged type and write the full type to disk.
Print the widest possible short type while still fitting in the terminal.
Add -Z maximal-hir-to-mir-coverage flag
This PR adds a new unstable flag `-Z maximal-hir-to-mir-coverage` that changes the behavior of `maybe_lint_level_root_bounded`, pursuant to [a discussion on Zulip](https://rust-lang.zulipchat.com/#narrow/stream/131828-t-compiler/topic/Mapping.20MIR.20to.20HIR). When enabled, this function will not search upwards for a lint root, but rather immediately return the provided HIR node ID. This change increases the granularity of the mapping between MIR locations and HIR nodes inside the `SourceScopeLocalData` data structures. This increase in granularity is useful for rustc consumers like [Flowistry](https://github.com/willcrichton/flowistry) that rely on getting source-mapping information about the MIR CFG that is as precise as possible.
A test `maximal_mir_to_hir_coverage.rs` has been added to verify that this flag does not break anything.
r? `@cjgillot`
cc `@gavinleroy`
Add StableOrd trait as proposed in MCP 533.
The `StableOrd` trait can be used to mark types as having a stable sort order across compilation sessions. Collections that sort their items in a stable way can safely implement HashStable by hashing items in sort order.
See https://github.com/rust-lang/compiler-team/issues/533 for more information.
Remove useless borrows and derefs
They are nothing more than noise.
<sub>These are not all of them, but my clippy started crashing (stack overflow), so rip :(</sub>
The StableOrd trait can be used to mark types as having a stable
sort order across compilation sessions. Collections that sort their
items in a stable way can safely implement HashStable by
hashing items in sort order.
On type error with long types, print an abridged type and write the full
type to disk.
Print the widest possible short type while still fitting in the
terminal.
make `error_reported` check for delayed bugs
Fixes#104768
`error_reported()` was only checking if there were errors emitted, not for `delay_bug`s which can also be a source of `ErrorGuaranteed`. I assume the same is true of `lint_err_count` but i dont know
Use `as_deref` in compiler (but only where it makes sense)
This simplifies some code :3
(there are some changes that are not exacly `as_deref`, but more like "clever `Option`/`Result` method use")
Instead of `ast::Lit`.
Literal lowering now happens at two different times. Expression literals
are lowered when HIR is crated. Attribute literals are lowered during
parsing.
This commit changes the language very slightly. Some programs that used
to not compile now will compile. This is because some invalid literals
that are removed by `cfg` or attribute macros will no longer trigger
errors. See this comment for more details:
https://github.com/rust-lang/rust/pull/102944#issuecomment-1277476773
improve `filesearch::get_or_default_sysroot`
`fn get_or_default_sysroot` is now improved and used in `miri` and `clippy`, and tests are still passing as they should. So we no longer need to implement custom workarounds/hacks to find sysroot in tools like miri/clippy.
Resolves https://github.com/rust-lang/rust/issues/98832
re-opened from #103581
Allow use of `-Clto=thin` with `-Ccodegen-units=1` in general
The current logic to ignore ThinLTO when `-Ccodegen-units=1` makes sense for local ThinLTO but even in this scenario, a user may still want (non-local) ThinLTO for the purpose of optimizing dependencies into the final crate which is being compiled with 1 CGU.
The previous behavior was even more confusing because if you were generating a binary (`--emit=link`), then you would get ThinLTO but if you asked for LLVM IR or bytecode, then it would silently change to using regular LTO.
With this change, we only override the defaults for local ThinLTO if you ask for a single output such as LLVM IR or bytecode and in all other cases honor the requested LTO setting.
r? `@michaelwoerister`
Print valid `--print` requests if request is invalid
When someone makes a typo, it can be useful to see the valid options. This is also useful if someone wants to find out about all the options.
Track where diagnostics were created.
This implements the `-Ztrack-diagnostics` flag, which uses `#[track_caller]` to track where diagnostics are created. It is meant as a debugging tool much like `-Ztreat-err-as-bug`.
For example, the following code...
```rust
struct A;
struct B;
fn main(){
let _: A = B;
}
```
...now emits the following error message:
```
error[E0308]: mismatched types
--> src\main.rs:5:16
|
5 | let _: A = B;
| - ^ expected struct `A`, found struct `B`
| |
| expected due to this
-Ztrack-diagnostics: created at compiler\rustc_infer\src\infer\error_reporting\mod.rs:2275:31
```
The current logic to ignore ThinLTO when `-Ccodegen-units=1` makes sense
for local ThinLTO but even in this scenario, a user may still want
(non-local) ThinLTO for the purpose of optimizing dependencies into the
final crate which is being compiled with 1 CGU.
The previous behavior was even more confusing because if you were
generating a binary (`--emit=link`), then you would get ThinLTO but if
you asked for LLVM IR or bytecode, then it would silently change to
using regular LTO.
With this change, we only override the defaults for local ThinLTO if you
ask for a single output such as LLVM IR or bytecode and in all other
cases honor the requested LTO setting.
