Adjust UI tests for `unit_bindings` lint
- Explicitly annotate `let x: () = expr;` where `x` has unit type, or remove the unit binding to leave only `expr;` instead.
- Use `let () = init;` or `let pat = ();` where appropriate.
- Fix disjoint-capture-in-same-closure test which wasn't actually testing a closure: `tests/ui/closures/2229_closure_analysis/run_pass/disjoint-capture-in-same-closure.rs`.
Note that unfortunately there's *a lot* of UI tests, there are a couple of places where I may have left something like `let (): ()` (this is not needed but is left over from an ealier version of the lint) which is bad style.
This PR is to help with the `unit_bindings` lint at #112380.
- Either explicitly annotate `let x: () = expr;` where `x` has unit
type, or remove the unit binding to leave only `expr;` instead.
- Fix disjoint-capture-in-same-closure test
Uplift `clippy::cmp_nan` lint
This PR aims at uplifting the `clippy::cmp_nan` lint into rustc.
## `invalid_nan_comparisons`
~~(deny-by-default)~~ (warn-by-default)
The `invalid_nan_comparisons` lint checks comparison with `f32::NAN` or `f64::NAN` as one of the operand.
### Example
```rust,compile_fail
let a = 2.3f32;
if a == f32::NAN {}
```
### Explanation
NaN does not compare meaningfully to anything – not even itself – so those comparisons are always false.
-----
Mostly followed the instructions for uplifting a clippy lint described here: https://github.com/rust-lang/rust/pull/99696#pullrequestreview-1134072751
`@rustbot` label: +I-lang-nominated
r? compiler
Don't use `can_eq` in `derive(..)` suggestion for missing method
Unsatisfied predicates returned from method probe may reference inference vars from that probe, so drop this extra check I added in #110877 for more accurate derive suggestions...
Fixes#111500
MIR: opt-in normalization of `BasicBlock` and `Local` numbering
This doesn't matter at all for actual codegen, but after spending some time reading pre-codegen MIR, I was wishing I didn't have to jump around so much in reading post-inlining code.
So this add two passes that are off by default for every mir level, but can be enabled (`-Zmir-enable-passes=+ReorderBasicBlocks,+ReorderLocals`) for humans.
Add a tidy check to find unexpected files in UI tests, and clean up the results
While looking at UI tests, I noticed several weird files that were not being tested, some from even pre-1.0. I added a tidy check that fails if any files not known to compiletest or not used in tests (via manual list) are present in the ui tests.
Unfortunately the root entry limit had to be raised by 1 to accommodate the stderr file for one of the tests.
r? `@fee1-dead`
tweak "make mut" spans when assigning to locals
Work towards fixing #106857
This PR just cleans up a lot of spans which is helpful before properly fixing the issues. Best reviewed commit-by-commit.
r? `@estebank`
Tweak borrow suggestion span
Avoids a `span_to_snippet` call when we don't need to surround the expression in parentheses. The fact that the suggestion was using the whole span of the expression rather than just appending a `&` was prevented me from using `// run-rustfix` in another PR (https://github.com/rust-lang/rust/pull/110432#discussion_r1170500484).
Also some drive-by renames of functions that have been annoying me for a bit.
Fix some suggestions where a `Box<T>` is expected.
This fixes#111011, and also adds a suggestion for boxing a unit type when a `Box<T>` was expected and an empty block was found.
Implement tuple<->array convertions via `From`
This PR adds the following impls that convert between homogeneous tuples and arrays of the corresponding lengths:
```rust
impl<T> From<[T; 1]> for (T,) { ... }
impl<T> From<[T; 2]> for (T, T) { ... }
/* ... */
impl<T> From<[T; 12]> for (T, T, T, T, T, T, T, T, T, T, T, T) { ... }
impl<T> From<(T,)> for [T; 1] { ... }
impl<T> From<(T, T)> for [T; 2] { ... }
/* ... */
impl<T> From<(T, T, T, T, T, T, T, T, T, T, T, T)> for [T; 12] { ... }
```
IMO these are quite uncontroversial but note that they are, just like any other trait impls, insta-stable.
My type ascription
Oh rip it out
Ah
If you think we live too much then
You can sacrifice diagnostics
Don't mix your garbage
Into my syntax
So many weird hacks keep diagnostics alive
Yet I don't even step outside
So many bad diagnostics keep tyasc alive
Yet tyasc doesn't even bother to survive!
Substitute missing trait items suggestion correctly
Properly substitute missing item suggestions, so that when they reference generics from their parent trait they actually have the right time for the impl.
Also, some other minor tweaks like using `/* Type */` to signify a GAT's type is actually missing, and fixing generic arg suggestions for GATs in general.
Migrate most of `rustc_builtin_macros` to diagnostic impls
cc #100717
This is a couple of days work, but I decided to stop for now before the PR becomes too big. There's around 50 unresolved failures when `rustc::untranslatable_diagnostic` is denied, which I'll finish addressing once this PR goes thtough
A couple of outputs have changed, but in all instances I think the changes are an improvement/are more consistent with other diagnostics (although I'm happy to revert any which seem worse)
Update `error [E0449]: unnecessary visibility qualifier` to be more clear
This updates the error message `error[E0449]: unnecessary visibility qualifier` by clearly indicating that visibility qualifiers already inherit their visibility from a parent item. The error message previously implied that the qualifiers were permitted, which is not the case anymore.
Resolves#109822.
Make `unused_allocation` lint against `Box::new` too
Previously it only linted against `box` syntax, which likely won't ever be stabilized, which is pretty useless. Even now I'm not sure if it's a meaningful lint, but it's at least something 🤷
This means that code like the following will be linted against:
```rust
Box::new([1, 2, 3]).len();
f(&Box::new(1)); // where f : &i32 -> ()
```
The lint works by checking if a `Box::new` (or `box`) expression has an a borrow adjustment, meaning that the code that first stores the box in a variable won't be linted against:
```rust
let boxed = Box::new([1, 2, 3]); // no lint
boxed.len();
```
Implement -Zlink-directives=yes/no
`-Zlink-directives=no` will ignored `#[link]` directives while compiling a crate, so nothing is emitted into the crate's metadata. The assumption is that the build system already knows about the crate's native dependencies and can provide them at link time without these directives.
This is another way to address issue # #70093, which is currently addressed by `-Zlink-native-libraries` (implemented in #70095). The latter is implemented at link time, which has the effect of ignoring `#[link]` in *every* crate. This makes it a very large hammer as it requires all native dependencies to be known to the build system to be at all usable, including those in sysroot libraries. I think this means its effectively unused, and definitely under-used.
Being able to control this on a crate-by-crate basis should make it much easier to apply when needed.
I'm not sure if we need both mechanisms, but we can decide that later.
cc `@pcwalton` `@cramertj`
diagnostics: remove inconsistent English article "this" from E0107
Consider [`tests/ui/const-generics/generic_const_exprs/issue-102768.stderr`][issue-102768.stderr], the error message where it gives additional notes about where the associated type is defined, and how the dead code lint doesn't have an article, like in [`tests/ui/lint/dead-code/issue-85255.stderr`][issue-85255.stderr]. They don't have articles, so it seems unnecessary to have one here.
[issue-102768.stderr]: 07c993eba8/tests/ui/const-generics/generic_const_exprs/issue-102768.stderr
[issue-85255.stderr]: 07c993eba8/tests/ui/lint/dead-code/issue-85255.stderr
Consider `tests/ui/const-generics/generic_const_exprs/issue-102768.stderr`,
the error message where it gives additional notes about where the associated
type is defined, and how the dead code lint doesn't have an article,
like in `tests/ui/lint/dead-code/issue-85255.stderr`. They don't have
articles, so it seems unnecessary to have one here.
Ban associated type bounds in bad positions
We should not try to lower associated type bounds into TAITs in positions where `impl Trait` is not allowed (except for in `where` clauses, like `where T: Trait<Assoc: Bound>`).
This is achieved by using the same `rustc_ast_lowering` machinery as impl-trait does to characterize positions as universal/existential/disallowed.
Fixes#106077
Split out the first commit into #108066, since it's not really related.
`-Zlink-directives=no` will ignored `#[link]` directives while compiling a
crate, so nothing is emitted into the crate's metadata. The assumption is
that the build system already knows about the crate's native dependencies
and can provide them at link time without these directives.
This is another way to address issue # #70093, which is currently addressed
by `-Zlink-native-libraries` (implemented in #70095). The latter is
implemented at link time, which has the effect of ignoring `#[link]`
in *every* crate. This makes it a very large hammer as it requires all
native dependencies to be known to the build system to be at all usable,
including those in sysroot libraries. I think this means its effectively
unused, and definitely under-used.
Being able to control this on a crate-by-crate basis should make it much
easier to apply when needed.
I'm not sure if we need both mechanisms, but we can decide that later.
Fix overlapping spans in removing extra arguments
Fixes#108225
Each span is already extended to include the previous comma, so extending to the *next* comma is unecessary and causes an ICE with assertions on.
``@rustbot`` label +A-diagnostics
Convert a hard-warning about named static lifetimes into lint "unused_lifetimes"
Fixes https://github.com/rust-lang/rust/issues/96956.
Some changes are ported from https://github.com/rust-lang/rust/pull/98079, thanks to jeremydavis519.
r? `@estebank` `@petrochenkov`
Any feedback is appreciated!
## Actions
- [x] resolve conflicts
- [x] fix build
- [x] address review comments in last pr
- [x] update tests
Define the `named_static_lifetimes` lint
This lint will replace the existing hard-warning.
Replace the named static lifetime hard-warning with the new lint
Update the UI tests for the `named_static_lifetimes` lint
Remove the direct dependency on `rustc_lint_defs`
fix build
Signed-off-by: Zhi Qi <qizhi@pingcap.com>
use "UNUSED_LIFETIMES" instead
Signed-off-by: Zhi Qi <qizhi@pingcap.com>
update 1 test and fix typo
Signed-off-by: Zhi Qi <qizhi@pingcap.com>
update tests
Signed-off-by: Zhi Qi <qizhi@pingcap.com>
fix tests: add extra blank line
Signed-off-by: Zhi Qi <qizhi@pingcap.com>
Most tests involving save-analysis were removed, but I kept a few where
the `-Zsave-analysis` was an add-on to the main thing being tested,
rather than the main thing being tested.
For `x.py install`, the `rust-analysis` target has been removed.
For `x.py dist`, the `rust-analysis` target has been kept in a
degenerate form: it just produces a single file `reduced.json`
indicating that save-analysis has been removed. This is necessary for
rustup to keep working.
Closes#43606.
Avoid exposing type parameters and implementation details sourced from macro expansions
Fixes#107745.
~~I would like to **request some guidance** for this issue, because I don't think this is a good fix (a band-aid at best).~~
### The Problem
The code
```rust
fn main() {
println!("{:?}", []);
}
```
gets desugared into (`rustc +nightly --edition=2018 issue-107745.rs -Z unpretty=hir`):
```rust
#[prelude_import]
use std::prelude::rust_2018::*;
#[macro_use]
extern crate std;
fn main() {
{
::std::io::_print(<#[lang = "format_arguments"]>::new_v1(&["",
"\n"], &[<#[lang = "format_argument"]>::new_debug(&[])]));
};
}
```
so the diagnostics code tries to be as specific and helpful as possible, and I think it finds that `[]` needs a type parameter and so does `new_debug`. But since `[]` doesn't have an origin for the type parameter definition, it points to `new_debug` instead and leaks the internal implementation detail since all `[]` has is an type inference variable.
### ~~The Bad Fix~~
~~This PR currently tries to fix the problem by bypassing the generated function `<#[lang = "format_argument"]>::new_debug` to avoid its generic parameter (I think it is auto-generated from the argument `[_; 0]`?) from getting collected as an `InsertableGenericArg`. This is problematic because it also prevents the help from getting displayed.~~
~~I think this fix is not ideal and hard-codes the format generated code pattern, but I can't think of a better fix. I have tried asking on Zulip but no responses there yet.~~
Fix suggestions rendering when the diff span is multiline
Fixes#92741
cc `@estebank`
I think, I finally fixed. I still want to go back and try to clean up the code a bit. I'm open to suggestions.
Some examples of the new suggestions:
```
help: consider removing the borrow
|
2 - &
|
```
```
help: consider removing the borrow
|
2 - &
3 - mut
|
```
```
help: consider removing the borrow
|
2 - &
3 - mut if true { true } else { false }
2 + if true { true } else { false }
|
```
Should we add a test to ensure this behavior doesn't disappear in the future?
Suggest using a lock for `*Cell: Sync` bounds
I mostly did this for `OnceCell<T>` at first because users will be confused to see that the `OnceCell<T>` in `std` isn't `Sync` but then extended it to `Cell<T>` and `RefCell<T>` as well.
Change `bindings_with_variant_name` to deny-by-default
Changed the `bindings_with_variant_name` lint to deny-by-default and fixed up the affected tests.
Addresses #103442.
Migrate mir_build diagnostics 2 of 3
The first three commits are fairly boring, however I've made some changes to the output of the match checking diagnostics.
