- In `emit_producing_error_guaranteed`, only allow `Level::Error`.
- In `emit_diagnostic`, only produce `ErrorGuaranteed` for `Level` and
`DelayedBug`. (Not `Bug` or `Fatal`. They don't need it, because the
relevant `emit` methods abort.)
- Add/update various comments.
Some cleanups around diagnostic levels.
Plus some refactoring in and around diagnostic levels and emission. Details in the individual commit logs.
r? ````@oli-obk````
All the other `emit`/`emit_diagnostic` methods were recently made
consuming (e.g. #119606), but this one wasn't. But it makes sense to.
Much of this is straightforward, and lots of `clone` calls are avoided.
There are a couple of tricky bits.
- `Emitter::primary_span_formatted` no longer takes a `Diagnostic` and
returns a pair. Instead it takes the two fields from `Diagnostic` that
it used (`span` and `suggestions`) as `&mut`, and modifies them. This
is necessary to avoid the cloning of `diag.children` in two emitters.
- `from_errors_diagnostic` is rearranged so various uses of `diag` occur
before the consuming `emit_diagnostic` call.
The two kinds of delayed bug have quite different semantics so a
stronger conceptual separation is nice. (`is_error` is a good example,
because the two kinds have different behaviour.)
The commit also moves the `DelayedBug` variant after `Error` in `Level`,
to reflect the fact that it's weaker than `Error` -- it might trigger an
error but also might not. (The pre-existing `downgrade_to_delayed_bug`
function also reflects the notion that delayed bugs are lower/after
normal errors.)
Plus it condenses some of the comments on `Level` into a table, for
easier reading, and introduces `can_be_top_or_sub` to indicate which
levels can be used in top-level diagnostics vs. subdiagnostics.
Finally, it renames `DiagCtxtInner::span_delayed_bugs` as
`DiagCtxtInner::delayed_bugs`. The `span_` prefix is unnecessary because
some delayed bugs don't have a span.
- Combine two different blocks involving
`diagnostic.level.get_expectation_id()` into one.
- Combine several `if`s involving `diagnostic.level` into a single
`match`.
This requires reordering some of the operations, but this has no
functional effect.
It doesn't affect behaviour, but makes sense with (a) `FailureNote` having
`()` as its emission guarantee, and (b) in `Level` the `is_error` levels
now are all listed before the non-`is_error` levels.
`emit_future_breakage` calls
`self.dcx().take_future_breakage_diagnostics()` and then passes the
result to `self.dcx().emit_future_breakage_report(diags)`. This commit
removes the first of these and lets `emit_future_breakage_report` do the
taking.
It also inlines and removes what is left of `emit_future_breakage`,
which has a single call site.
- `emitted_at` isn't used outside the crate.
- `code` and `messages` are public fields, so there's no point have
trivial getters/setters for them.
- `suggestions` is public, so the comment about "functionality on
`Diagnostic`" isn't needed.
Suppress unhelpful diagnostics for unresolved top level attributes
Fixes#118455, unresolved top level attribute error didn't imported prelude and already have emitted an error, report builtin macro and attributes error by the way, so `check_invalid_crate_level_attr` in can ignore them.
Also fixes#89566, fixes#67107.
r? `@petrochenkov`
Error codes are integers, but `String` is used everywhere to represent
them. Gross!
This commit introduces `ErrCode`, an integral newtype for error codes,
replacing `String`. It also introduces a constant for every error code,
e.g. `E0123`, and removes the `error_code!` macro. The constants are
imported wherever used with `use rustc_errors::codes::*`.
With the old code, we have three different ways to specify an error code
at a use point:
```
error_code!(E0123) // macro call
struct_span_code_err!(dcx, span, E0123, "msg"); // bare ident arg to macro call
\#[diag(name, code = "E0123")] // string
struct Diag;
```
With the new code, they all use the `E0123` constant.
```
E0123 // constant
struct_span_code_err!(dcx, span, E0123, "msg"); // constant
\#[diag(name, code = E0123)] // constant
struct Diag;
```
The commit also changes the structure of the error code definitions:
- `rustc_error_codes` now just defines a higher-order macro listing the
used error codes and nothing else.
- Because that's now the only thing in the `rustc_error_codes` crate, I
moved it into the `lib.rs` file and removed the `error_codes.rs` file.
- `rustc_errors` uses that macro to define everything, e.g. the error
code constants and the `DIAGNOSTIC_TABLES`. This is in its new
`codes.rs` file.
We have several methods indicating the presence of errors, lint errors,
and delayed bugs. I find it frustrating that it's very unclear which one
you should use in any particular spot. This commit attempts to instill a
basic principle of "use the least general one possible", because that
reflects reality in practice -- `has_errors` is the least general one
and has by far the most uses (esp. via `abort_if_errors`).
Specifics:
- Add some comments giving some usage guidelines.
- Prefer `has_errors` to comparing `err_count` to zero.
- Remove `has_errors_or_span_delayed_bugs` because it's a weird one: in
the cases where we need to count delayed bugs, we should really be
counting lint errors as well.
- Rename `is_compilation_going_to_fail` as
`has_errors_or_lint_errors_or_span_delayed_bugs`, for consistency with
`has_errors` and `has_errors_or_lint_errors`.
- Change a few other `has_errors_or_lint_errors` calls to `has_errors`,
as per the "least general" principle.
This didn't turn out to be as neat as I hoped when I started, but I
think it's still an improvement.
`Diagnostic::code` has the type `DiagnosticId`, which has `Error` and
`Lint` variants. Plus `Diagnostic::is_lint` is a bool, which should be
redundant w.r.t. `Diagnostic::code`.
Seems simple. Except it's possible for a lint to have an error code, in
which case its `code` field is recorded as `Error`, and `is_lint` is
required to indicate that it's a lint. This is what happens with
`derive(LintDiagnostic)` lints. Which means those lints don't have a
lint name or a `has_future_breakage` field because those are stored in
the `DiagnosticId::Lint`.
It's all a bit messy and confused and seems unintentional.
This commit:
- removes `DiagnosticId`;
- changes `Diagnostic::code` to `Option<String>`, which means both
errors and lints can straightforwardly have an error code;
- changes `Diagnostic::is_lint` to `Option<IsLint>`, where `IsLint` is a
new type containing a lint name and a `has_future_breakage` bool, so
all lints can have those, error code or not.
`-Ztreat-err-as-bug` treats normal errors and delayed bugs equally,
which can lead to some really surprising results.
This commit changes `-Ztreat-err-as-bug` so it ignores delayed bugs,
unless they get promoted to proper bugs and are printed.
This feels to me much simpler and more logical. And it simplifies the
implementation:
- The `-Ztreat-err-as-bug` check is removed from in
`DiagCtxt::{delayed_bug,span_delayed_bug}`.
- `treat_err_as_bug` doesn't need to count delayed bugs.
- The `-Ztreat-err-as-bug` panic message is simpler, because it doesn't
have to mention delayed bugs.
Output of delayed bugs is now more consistent. They're always printed
the same way. Previously when they triggered `-Ztreat-err-as-bug` they
would be printed slightly differently, via `span_bug` in
`span_delayed_bug` or `delayed_bug`.
A minor behaviour change: the "no errors encountered even though
`span_delayed_bug` issued" printed before delayed bugs is now a note
rather than a bug. This is done so it doesn't get counted as an error
that might trigger `-Ztreat-err-as-bug`, which would be silly.
This means that if you use `-Ztreat-err-as-bug=1` and there are no
normal errors but there are delayed bugs, the first delayed bug will be
shown (and the panic will happen after it's printed).
Also, I have added a second note saying "those delayed bugs will now be
shown as internal compiler errors". I think this makes it clearer what
is happening, because the whole concept of delayed bugs is non-obvious.
There are some test changes.
- equality-in-canonical-query.rs: Minor output changes, and the error
count reduces by one because the "no errors encountered even though
`span_delayed_bug` issued" message is no longer counted as an error.
- rpit_tait_equality_in_canonical_query.rs: Ditto.
- storage-live.rs: The query stack disappears because these delayed bugs
are now printed at the end, rather than when they are created.
- storage-return.rs, span_delayed_bug.rs: now need
`-Zeagerly-emit-delayed-bugs` because they need the delayed bugs
emitted immediately to preserve behaviour.
There are two places that handle normal delayed bugs. This commit
factors out some repeated code.
Also, we can use `std::mem::take` instead of `std::mem::replace`.
Errors in `DiagCtxtInner::emit_diagnostic` are never set to
`Level::Bug`, because the condition never succeeds, because
`self.treat_err_as_bug()` is called *before* the error counts are
incremented.
This commit switches to `self.treat_next_err_as_bug()`, fixing the
problem. This changes the error message output to actually say "internal
compiler error".
Of the error levels satisfying `is_error`, `Level::Error` is the only
one that can be a lint, so there's no need to check for it.
(And even if it wasn't, it would make more sense to include
non-`Error`-but-`is_error` lints under `lint_err_count` than under
`err_count`.)
There are four functions that adjust error and warning counts:
- `stash_diagnostic` (increment)
- `steal_diagnostic` (decrement)
- `emit_stashed_diagnostics) (decrement)
- `emit_diagnostic` (increment)
The first three all behave similarly, and only update `warn_count` for
forced warnings. But the last one updates `warn_count` for both forced
and non-forced warnings.
Seems like a bug. How should it be fixed? Well, `warn_count` is only
used in one place: `DiagCtxtInner::drop`, where it's part of the
condition relating to the printing of `good_path_delayed_bugs`. The
intention of that condition seems to be "have any errors been printed?"
so this commit replaces `warn_count` with `has_printed`, which is set
when printing occurs. This is simpler than all the ahead-of-time
incrementing and decrementing.
`is_force_warn` is only possible for diagnostics with `Level::Warning`,
but it is currently stored in `Diagnostic::code`, which every diagnostic
has.
This commit:
- removes the boolean `DiagnosticId::Lint::is_force_warn` field;
- adds a `ForceWarning` variant to `Level`.
Benefits:
- The common `Level::Warning` case now has no arguments, replacing
lots of `Warning(None)` occurrences.
- `rustc_session::lint::Level` and `rustc_errors::Level` are more
similar, both having `ForceWarning` and `Warning`.
In #119606 I added them and used a `_mv` suffix, but that wasn't great.
A `with_` prefix has three different existing uses.
- Constructors, e.g. `Vec::with_capacity`.
- Wrappers that provide an environment to execute some code, e.g.
`with_session_globals`.
- Consuming chaining methods, e.g. `Span::with_{lo,hi,ctxt}`.
The third case is exactly what we want, so this commit changes
`DiagnosticBuilder::foo_mv` to `DiagnosticBuilder::with_foo`.
Thanks to @compiler-errors for the suggestion.
We have `span_delayed_bug` and often pass it a `DUMMY_SP`. This commit
adds `delayed_bug`, which matches pairs like `err`/`span_err` and
`warn`/`span_warn`.
It was added in #54232. It seems like it was aimed at NLL development,
which is well in the past. Also, it looks like `-Ztreat-err-as-bug` can
be used to achieve the same effect. So it doesn't seem necessary.
They are no longer used, because
`{DiagCtxt,DiagCtxtInner}::emit_diagnostic` are used everywhere instead.
This also means `track_diagnostic` can become consuming.
Currently it's used for two dynamic checks:
- When a diagnostic is emitted, has it been emitted before?
- When a diagnostic is dropped, has it been emitted/cancelled?
The first check is no longer need, because `emit` is consuming, so it's
impossible to emit a `DiagnosticBuilder` twice. The second check is
still needed.
This commit replaces `DiagnosticBuilderState` with a simpler
`Option<Box<Diagnostic>>`, which is enough for the second check:
functions like `emit` and `cancel` can take the `Diagnostic` and then
`drop` can check that the `Diagnostic` was taken.
The `DiagCtxt` reference from `DiagnosticBuilderState` is now stored as
its own field, removing the need for the `dcx` method.
As well as making the code shorter and simpler, the commit removes:
- One (deprecated) `ErrorGuaranteed::unchecked_claim_error_was_emitted`
call.
- Two `FIXME(eddyb)` comments that are no longer relevant.
- The use of a dummy `Diagnostic` in `into_diagnostic`.
Nice!
