Support clobber_abi and vector registers (clobber-only) in PowerPC inline assembly
This supports `clobber_abi` which is one of the requirements of stabilization mentioned in #93335.
This basically does a similar thing I did in https://github.com/rust-lang/rust/pull/130630 to implement `clobber_abi` for s390x, but for powerpc/powerpc64/powerpc64le.
- This also supports vector registers (as `vreg`) as clobber-only, which need to support clobbering of them to implement `clobber_abi`.
- `vreg` should be able to accept `#[repr(simd)]` types as input/output if the unstable `altivec` target feature is enabled, but `core::arch::{powerpc,powerpc64}` vector types, `#[repr(simd)]`, and `core::simd` are all unstable, so the fact that this is currently a clobber-only should not be considered a blocker of clobber_abi implementation or stabilization. So I have not implemented it in this PR.
- See https://github.com/rust-lang/rust/pull/131551 (which is based on this PR) for a PR to implement this.
- (I'm not sticking to whether that PR should be a separate PR or part of this PR, so I can merge that PR into this PR if needed.)
Refs:
- PPC32 SysV: Section "Function Calling Sequence" in [System V Application Binary Interface PowerPC Processor Supplement](https://refspecs.linuxfoundation.org/elf/elfspec_ppc.pdf)
- PPC64 ELFv1: Section 3.2 "Function Calling Sequence" in [64-bit PowerPC ELF Application Binary Interface Supplement](https://refspecs.linuxfoundation.org/ELF/ppc64/PPC-elf64abi.html#FUNC-CALL)
- PPC64 ELFv2: Section 2.2 "Function Calling Sequence" in [64-Bit ELF V2 ABI Specification](https://openpowerfoundation.org/specifications/64bitelfabi/)
- AIX: [Register usage and conventions](https://www.ibm.com/docs/en/aix/7.3?topic=overview-register-usage-conventions), [Special registers in the PowerPC®](https://www.ibm.com/docs/en/aix/7.3?topic=overview-special-registers-in-powerpc), [AIX vector programming](https://www.ibm.com/docs/en/aix/7.3?topic=concepts-aix-vector-programming)
- Register definition in LLVM: https://github.com/llvm/llvm-project/blob/llvmorg-19.1.0/llvm/lib/Target/PowerPC/PPCRegisterInfo.td#L189
If I understand the above four ABI documentations correctly, except for the PPC32 SysV's VR (Vector Registers) and 32-bit AIX (currently not supported by rustc)'s r13, there does not appear to be important differences in terms of implementing `clobber_abi`:
- The above four ABIs are consistent about FPR (0-13: volatile, 14-31: nonvolatile), CR (0-1,5-7: volatile, 2-4: nonvolatile), XER (volatile), and CTR (volatile).
- As for GPR, only the registers we are treating as reserved are slightly different
- r0, r3-r12 are volatile
- r1(sp, reserved), r14-31 are nonvolatile
- r2(reserved) is TOC pointer in PPC64 ELF/AIX, system-reserved register in PPC32 SysV (AFAIK used as thread pointer in Linux/BSDs)
- r13(reserved for non-32-bit-AIX) is thread pointer in PPC64 ELF, small data area pointer register in PPC32 SysV, "reserved under 64-bit environment; not restored across system calls[^r13]" in AIX)
- As for FPSCR, volatile in PPC64 ELFv1/AIX, some fields are volatile only in certain situations (rest are volatile) in PPC32 SysV/PPC64 ELFv2.
- As for VR (Vector Registers), it is not mentioned in PPC32 SysV, v0-v19 are volatile in both in PPC64 ELF/AIX, v20-v31 are nonvolatile in PPC64 ELF, reserved or nonvolatile depending on the ABI ([vec-extabi vs vec-default in LLVM](https://reviews.llvm.org/D89684), we are [using vec-extabi](https://github.com/rust-lang/rust/pull/131341#discussion_r1797693299)) in AIX:
> When the default Vector enabled mode is used, these registers are reserved and must not be used.
> In the extended ABI vector enabled mode, these registers are nonvolatile and their values are preserved across function calls
I left [FIXME comment about PPC32 SysV](https://github.com/rust-lang/rust/pull/131341#discussion_r1790496095) and added ABI check for AIX.
- As for VRSAVE, it is not mentioned in PPC32 SysV, nonvolatile in PPC64 ELFv1, reserved in PPC64 ELFv2/AIX
- As for VSCR, it is not mentioned in PPC32 SysV/PPC64 ELFv1, some fields are volatile only in certain situations (rest are volatile) in PPC64 ELFv2, volatile in AIX
We are currently treating r1-r2, r13 (non-32-bit-AIX), r29-r31, LR, CTR, and VRSAVE as reserved.
We are currently not processing anything about FPSCR and VSCR, but I feel those are things that should be processed by `preserves_flags` rather than `clobber_abi` if we need to do something about them. (However, PPCRegisterInfo.td in LLVM does not seem to define anything about them.)
Replaces #111335 and #124279
cc `@ecnelises` `@bzEq` `@lu-zero`
r? `@Amanieu`
`@rustbot` label +O-PowerPC +A-inline-assembly
[^r13]: callee-saved, according to [LLVM](6a6af0246b/llvm/lib/Target/PowerPC/PPCCallingConv.td (L322)) and [GCC](a9173a50e7/gcc/config/rs6000/rs6000.h (L859)).
Suggest creating unary tuples when types don't match a trait
When you want to have a variadic function, a common workaround to implement this is to create a trait and then implement that trait for various tuples. For example in `pyo3` there exists
```rust
/// Calls the object with only positional arguments.
pub fn call1(&self, args: impl IntoPy<Py<PyTuple>>) -> PyResult<&PyAny> {
...
}
```
with various impls like
```rust
impl<A: IntoPy<PyObject> IntoPy<Py<PyAny>> for (A,)
impl<A: IntoPy<PyObject, B: IntoPy<PyObject> IntoPy<Py<PyAny>> for (A, B)
... etc
```
This means that if you want to call the method with a single item you have to create a unary tuple, like `(x,)`, rather than just `x`.
This PR implements a suggestion to do that, if applicable.
find the generic container rather than simply looking up for the assoc with const arg
Fixes#132534
This issue is caused by mismatched generic parameters. Previously, it tried to find `T` in `trait X`, but after this change, it will find `T` in `fn a`.
r? `@compiler-errors` as this assertion was introduced by you.
Use backticks instead of single quotes for library feature names in diagnostics
This PR changes the text of library feature errors for using unstable or body-unstable items. Displaying library feature names in backticks is consistent with other diagnostics (e.g. those from `rustc_passes`) and with the `reason`s on unstable attributes in the library. Additionally, this simplifies diagnostics when supporting multiple unstable attributes on items (see #131824) since `DiagSymbolList` also displays symbols using backticks.
This is consistent with all other diagnostics I could find containing
features and enables the use of `DiagSymbolList` for generalizing
diagnostics for unstable library features to multiple features.
Added regression test for generics index out of bounds
Added a regression test for #117446
This ICE was fixed in Rust 1.75 but a regression test was never added.
This PR adds a UI test with a reduced version of the original bug report that does not rely on external crates.
Add `--print host-tuple` to print host target tuple
People often parse `-vV` output to get to the host tuple, which is annoying to do. It's easier to just get it directly.
I called it "host-tuple" instead of "host" because it's clearer that it's just the target name. I'm open to different names, but I think this one is fine.
a quick GitHub search for `'^host` reveals many instances of people doing the parsing, for example:
68e0ca57cd/README.md (L369)0e38473b0c/main.sh (L96)8a3553b865/README.md (L625)43f3ec3970/do.sh (L35)
needs a compiler FCP. I could also do an MCP but I think just an FCP here makes the most sense.
Tweak E0277 output when a candidate is available
*Follow up to #132086.*
Go from
```
error[E0277]: the trait bound `Then<Ignored<chumsky::combinator::Filter<chumsky::primitive::Any<&str, chumsky::extra::Full<EmptyErr, (), ()>>, {closure@src/main.rs:9:17: 9:27}>, char>, chumsky::combinator::Map<impl CSTParser<'a, O>, O, {closure@src/main.rs:11:24: 11:27}>, (), (), chumsky::extra::Full<EmptyErr, (), ()>>: CSTParser<'a>` is not satisfied
--> src/main.rs:7:50
|
7 | fn leaf<'a, O>(parser: impl CSTParser<'a, O>) -> impl CSTParser<'a, ()> {
| ^^^^^^^^^^^^^^^^^^^^^^ the trait `chumsky::private::ParserSealed<'_, &str, (), chumsky::extra::Full<EmptyErr, (), ()>>` is not implemented for `Then<Ignored<Filter<Any<&str, ...>, ...>, ...>, ..., ..., ..., ...>`, which is required by `Then<Ignored<chumsky::combinator::Filter<chumsky::primitive::Any<&str, chumsky::extra::Full<EmptyErr, (), ()>>, {closure@src/main.rs:9:17: 9:27}>, char>, chumsky::combinator::Map<impl CSTParser<'a, O>, O, {closure@src/main.rs:11:24: 11:27}>, (), (), chumsky::extra::Full<EmptyErr, (), ()>>: CSTParser<'a>`
|
= help: the trait `chumsky::private::ParserSealed<'_, &'a str, ((), ()), chumsky::extra::Full<EmptyErr, (), ()>>` is implemented for `Then<Ignored<chumsky::combinator::Filter<chumsky::primitive::Any<&str, chumsky::extra::Full<EmptyErr, (), ()>>, {closure@src/main.rs:9:17: 9:27}>, char>, chumsky::combinator::Map<impl CSTParser<'a, O>, O, {closure@src/main.rs:11:24: 11:27}>, (), (), chumsky::extra::Full<EmptyErr, (), ()>>`
= help: for that trait implementation, expected `((), ())`, found `()`
= note: required for `Then<Ignored<Filter<Any<&str, ...>, ...>, ...>, ..., ..., ..., ...>` to implement `Parser<'_, &str, ()>`
note: required for `Then<Ignored<Filter<Any<&str, ...>, ...>, ...>, ..., ..., ..., ...>` to implement `CSTParser<'a>`
--> src/main.rs:5:16
|
5 | impl<'a, O, T> CSTParser<'a, O> for T where T: Parser<'a, &'a str, O> {}
| ^^^^^^^^^^^^^^^^ ^ ---------------------- unsatisfied trait bound introduced here
= note: the full name for the type has been written to '/home/gh-estebank/longlong/target/debug/deps/longlong-0008f9a4f2023b08.long-type-13239977239800463552.txt'
= note: consider using `--verbose` to print the full type name to the console
= note: the full name for the type has been written to '/home/gh-estebank/longlong/target/debug/deps/longlong-0008f9a4f2023b08.long-type-13239977239800463552.txt'
= note: consider using `--verbose` to print the full type name to the console
```
to
```
error[E0277]: the trait bound `Then<Ignored<chumsky::combinator::Filter<chumsky::primitive::Any<&str, chumsky::extra::Full<EmptyErr, (), ()>>, {closure@src/main.rs:9:17: 9:27}>, char>, chumsky::combinator::Map<impl CSTParser<'a, O>, O, {closure@src/main.rs:11:24: 11:27}>, (), (), chumsky::extra::Full<EmptyErr, (), ()>>: CSTParser<'a>` is not satisfied
--> src/main.rs:7:50
|
7 | fn leaf<'a, O>(parser: impl CSTParser<'a, O>) -> impl CSTParser<'a, ()> {
| ^^^^^^^^^^^^^^^^^^^^^^ unsatisfied trait bound
...
11 | ws.then(parser.map(|_| ()))
| --------------------------- return type was inferred to be `Then<Ignored<..., ...>, ..., ..., ..., ...>` here
|
= help: the trait `ParserSealed<'_, &_, (), Full<_, _, _>>` is not implemented for `Then<Ignored<..., ...>, ..., ..., ..., ...>`
but trait `ParserSealed<'_, &'a _, ((), ()), Full<_, _, _>>` is implemented for it
= help: for that trait implementation, expected `((), ())`, found `()`
= note: required for `Then<Ignored<..., ...>, ..., ..., ..., ...>` to implement `Parser<'_, &str, ()>`
note: required for `Then<Ignored<..., ...>, ..., ..., ..., ...>` to implement `CSTParser<'a>`
--> src/main.rs:5:16
|
5 | impl<'a, O, T> CSTParser<'a, O> for T where T: Parser<'a, &'a str, O> {}
| ^^^^^^^^^^^^^^^^ ^ ---------------------- unsatisfied trait bound introduced here
= note: the full name for the type has been written to '/home/gh-estebank/longlong/target/debug/deps/longlong-df9d52be87eada65.long-type-1337037744507305372.txt'
= note: consider using `--verbose` to print the full type name to the console
```
* Remove redundant wording
* Introduce trait diff highlighting logic and use it
* Fix incorrect "long type written to path" logic (can be split off)
* Point at tail expression in more cases in E0277
* Avoid long primary span labels in E0277 by moving them to a `help`
Fix#132013.
There are individual commits that can be their own PR. If the review load is too big, happy to split them off.
Also treat `impl` definition parent as transparent regarding modules
This PR changes the `non_local_definitions` lint logic to also consider `impl` definition parent as transparent regarding modules.
See tests and explanation in the changes.
``````@rustbot`````` label +L-non_local_definitions
Fixes *(after beta-backport)* #132427
cc ``````@leighmcculloch``````
r? ``````@jieyouxu``````
Do not suggest `#[derive(Copy)]` when we wanted a `!Copy` type.
Do not say "`Copy` is not implemented for `T` but `Copy` is".
Do not talk about `Trait` having no implementations when `!Trait` was desired.
```
error[E0277]: the trait bound `{gen block@$DIR/gen_block_is_coro.rs:7:5: 7:8}: Coroutine` is not satisfied
--> $DIR/gen_block_is_coro.rs:6:13
|
LL | fn foo() -> impl Coroutine<Yield = u32, Return = ()> {
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ the trait `Coroutine` is not implemented for `{gen block@$DIR/gen_block_is_coro.rs:7:5: 7:8}`
LL | gen { yield 42 }
| ---------------- return type was inferred to be `{gen block@$DIR/gen_block_is_coro.rs:7:5: 7:8}` here
```
The secondary span label is new.
When a trait is not implemented for a type, but there *is* an `impl`
for another type or different trait params, we format the output to
use highlighting in the same way that E0308 does for types.
The logic accounts for 3 cases:
- When both the type and trait in the expected predicate and the candidate are different
- When only the types are different
- When only the trait generic params are different
For each case, we use slightly different formatting and wording.
Rollup of 14 pull requests
Successful merges:
- #131829 (Remove support for `-Zprofile` (gcov-style coverage instrumentation))
- #132369 (style-guide: Only use the new binop heuristic for assignments)
- #132383 (Implement suggestion for never type fallback lints)
- #132413 (update offset_of! docs to reflect the stabilization of nesting)
- #132438 (Remove unncessary option for default rust-analyzer setting)
- #132439 (Add `f16` and `f128` to `invalid_nan_comparison`)
- #132444 (rustdoc: Directly use rustc_abi instead of reexports)
- #132445 (Cleanup attributes around unchecked shifts and unchecked negation in const)
- #132448 (Add missing backtick)
- #132450 (Show actual MIR when MIR building forgot to terminate block)
- #132451 (remove some unnecessary rustc_allow_const_fn_unstable)
- #132455 (make const_alloc_layout feature gate only about functions that are already stable)
- #132456 (Move remaining inline assembly test files into asm directory)
- #132459 (feat(byte_sub_ptr): unstably add ptr::byte_sub_ptr)
r? `@ghost`
`@rustbot` modify labels: rollup
Add `f16` and `f128` to `invalid_nan_comparison`
Currently `f32_nan` and `f64_nan` are used to provide the `invalid_nan_comparison` lint. Since we have `f16_nan` and `f128_nan`, hook these up so the new float types get the same lints.
Implement suggestion for never type fallback lints
r? ```@WaffleLapkin```
Just opening this up for vibes; it's not done yet. I'd still like to make this suggestable in a few more cases before merge:
- [x] Try to annotate `_` -> `()`
- [x] Try to annotate local variables if they're un-annotated: `let x = ...` -> `let x: () = ...`
- [x] Try to annotate the self type of a `Trait::method()` -> `<() as Trait>::method()`.
The only other case we may want to suggest is a missing turbofish, like `f()` -> `f::<()>()`. That may be possible, but seems overly annoying.
This partly addresses https://github.com/rust-lang/rust/issues/132358; the other half of fixing that would be to make the error message a bit better, perhaps just special casing the `?` operator 🤔 I don't think I'll do that part.
Currently `f32_nan` and `f64_nan` are used to provide the
`invalid_nan_comparison` lint. Since we have `f16_nan` and `f128_nan`,
hook these up so the new float types get the same lints.
