Support casting boxes to dyn*
Boxes have a pointer type at codegen time which LLVM does not allow to be transparently converted to an integer. Work around this by inserting a `ptrtoint` instruction if the argument is a pointer.
r? ``@compiler-errors``
Fixes#102427
translation: eager translation
Part of #100717. See [Zulip thread](https://rust-lang.zulipchat.com/#narrow/stream/336883-i18n/topic/.23100717.20lists!/near/295010720) for additional context.
- **Store diagnostic arguments in a `HashMap`**: Eager translation will enable subdiagnostics to be translated multiple times with different arguments - this requires the ability to replace the value of one argument with a new value, which is better suited to a `HashMap` than the previous storage, a `Vec`.
- **Add `AddToDiagnostic::add_to_diagnostic_with`**: `AddToDiagnostic::add_to_diagnostic_with` is similar to the previous `AddToDiagnostic::add_to_diagnostic` but takes a function that can be used by the caller to modify diagnostic messages originating from the subdiagnostic (such as performing translation eagerly). `add_to_diagnostic` now just calls `add_to_diagnostic_with` with an empty closure.
- **Add `DiagnosticMessage::Eager`**: Add variant of `DiagnosticMessage` for eagerly translated messages
(messages in the target language which don't need translated by the emitter during emission). Also adds `eager_subdiagnostic` function which is intended to be invoked by the diagnostic derive for subdiagnostic fields which are marked as needing eager translation.
- **Support `#[subdiagnostic(eager)]`**: Add support for `eager` argument to the `subdiagnostic` attribute which generates a call to `eager_subdiagnostic`.
- **Finish migrating `rustc_query_system`**: Using eager translation, migrate the remaining repeated cycle stack diagnostic.
- **Split formatting initialization and use in diagnostic derives**: Diagnostic derives have previously had to take special care when ordering the generated code so that fields were not used after a move.
This is unlikely for most fields because a field is either annotated with a subdiagnostic attribute and is thus likely a `Span` and copiable, or is a argument, in which case it is only used once by `set_arg`
anyway.
However, format strings for code in suggestions can result in fields being used after being moved if not ordered carefully. As a result, the derive currently puts `set_arg` calls last (just before emission), such as:
let diag = { /* create diagnostic */ };
diag.span_suggestion_with_style(
span,
fluent::crate::slug,
format!("{}", __binding_0),
Applicability::Unknown,
SuggestionStyle::ShowAlways
);
/* + other subdiagnostic additions */
diag.set_arg("foo", __binding_0);
/* + other `set_arg` calls */
diag.emit();
For eager translation, this doesn't work, as the message being translated eagerly can assume that all arguments are available - so arguments _must_ be set first.
Format strings for suggestion code are now separated into two parts - an initialization line that performs the formatting into a variable, and a usage in the subdiagnostic addition.
By separating these parts, the initialization can happen before arguments are set, preserving the desired order so that code compiles, while still enabling arguments to be set before subdiagnostics are added.
let diag = { /* create diagnostic */ };
let __code_0 = format!("{}", __binding_0);
/* + other formatting */
diag.set_arg("foo", __binding_0);
/* + other `set_arg` calls */
diag.span_suggestion_with_style(
span,
fluent::crate::slug,
__code_0,
Applicability::Unknown,
SuggestionStyle::ShowAlways
);
/* + other subdiagnostic additions */
diag.emit();
- **Remove field ordering logic in diagnostic derive:** Following the approach taken in earlier commits to separate formatting initialization from use in the subdiagnostic derive, simplify the diagnostic derive by removing the field-ordering logic that previously solved this problem.
r? ```@compiler-errors```
Migrate `codegen_ssa` to diagnostics structs - [Part 1]
Initial migration of `codegen_ssa`. Going to split this crate migration in at least two PRs in order to avoid a huge PR and to quick off some questions around:
1. Translating messages from "external" crates.
2. Interfacing with OS messages.
3. Adding UI tests while migrating diagnostics.
_See comments below._
Eager translation will enable subdiagnostics to be translated multiple
times with different arguments - this requires the ability to replace
the value of one argument with a new value, which is better suited to a
`HashMap` than the previous storage, a `Vec`.
Signed-off-by: David Wood <david.wood@huawei.com>
Remove `mir::CastKind::Misc`
As discussed in #97649 `mir::CastKind::Misc` is not clear, this PR addresses that by creating a new enum variant for every valid cast.
r? ````@oli-obk````
- UPDATE - revert migration of logs
- UPDATE - use derive on LinkRlibError enum
- [Gardening] UPDATE - alphabetically sort fluent_messages
- UPDATE - use PathBuf and unify both AddNativeLibrary to use Display (which is what PathBuf uses when conforming to IntoDiagnosticArg)
- UPDATE - fluent messages sort after rebase
Remove `-Ztime`
Because it has a lot of overlap with `-Ztime-passes` but is generally less useful. Plus some related cleanups.
Best reviewed one commit at a time.
r? `@davidtwco`
The compiler currently has `-Ztime` and `-Ztime-passes`. I've used
`-Ztime-passes` for years but only recently learned about `-Ztime`.
What's the difference? Let's look at the `-Zhelp` output:
```
-Z time=val -- measure time of rustc processes (default: no)
-Z time-passes=val -- measure time of each rustc pass (default: no)
```
The `-Ztime-passes` description is clear, but the `-Ztime` one is less so.
Sounds like it measures the time for the entire process?
No. The real difference is that `-Ztime-passes` prints out info about passes,
and `-Ztime` does the same, but only for a subset of those passes. More
specifically, there is a distinction in the profiling code between a "verbose
generic activity" and an "extra verbose generic activity". `-Ztime-passes`
prints both kinds, while `-Ztime` only prints the first one. (It took me
a close reading of the source code to determine this difference.)
In practice this distinction has low value. Perhaps in the past the "extra
verbose" output was more voluminous, but now that we only print stats for a
pass if it exceeds 5ms or alters the RSS, `-Ztime-passes` is less spammy. Also,
a lot of the "extra verbose" cases are for individual lint passes, and you need
to also use `-Zno-interleave-lints` to see those anyway.
Therefore, this commit removes `-Ztime` and the associated machinery. One thing
to note is that the existing "extra verbose" activities all have an extra
string argument, so the commit adds the ability to accept an extra argument to
the "verbose" activities.
Only export `__tls_*` on wasm32-unknown-unknown.
From talking with `@abrown,` we aren't planning to have hosts call these `__tls_*` functions; instead, TLS initialization will be handled transparently within libc. Consequently, these functions don't need to be exported.
Leave them exported on wasm32-unknown-unknown though, as wasm-bindgen does call them.
From talking with @abrown, we aren't planning to have hosts call these
`__tls_*` functions; instead, TLS initialization will be handled
transparently within libc. Consequently, these functions don't need to
be exported.
Leave them exported on wasm32-unknown-unknown though, as wasm-bindgen
does call them.
Don't export `__wasm_init_memory` on WebAssembly.
Since #72889, the Rust wasm target doesn't use --passive-segments, so remove the `--export=__wasm_init_memory`.
As documented in the [tool-conventions Linking convention], `__wasm_init_memory` is not intended to be exported.
[tool-conventions Linking convention]: 7c064f3048/Linking.md (shared-memory-and-passive-segments)
Since #72889, the Rust wasm target doesn't use --passive-segments, so
remove the `--export=__wasm_init_memory`.
As documented in the [tool-conventions Linking convention],
`__wasm_init_memory` is not intended to be exported.
[tool-conventions Linking convention]: 7c064f3048/Linking.md (shared-memory-and-passive-segments)
`__heap_base` and `__data_end` are exported for use by wasm-bindgen, which
uses the wasm32-unknown-unknown target. On wasm32-wasi, as a step toward
implementing the Canonical ABI, and as an aid to building speicalized WASI
API polyfill wrappers, don't export `__heap_base` and `__data_end` on
wasm32-wasi.
Remove support for legacy PM
This removes support for optimizing with LLVM's legacy pass manager, as well as the unstable `-Znew-llvm-pass-manager` option. We have been defaulting to the new PM since LLVM 13 (except for s390x that waited for 14), and LLVM 15 removed support altogether. The only place we still use the legacy PM is for writing the output file, just like `llc` does.
cc #74705
r? ``@nikic``
This implements the `Linker::{link_whole_staticlib,link_whole_rlib}`
methods for the `WasmLd` linker used on wasm targets. Previously these
methods were noops since I think historically `wasm-ld` did not have
support for `--whole-archive` but nowadays it does, so the flags are
passed through.
Update rustc's information on Android's sanitizers
This patch updates sanitizer support definitions for Android inside the compiler. It also adjusts the logic to make sure no pre-built sanitizer runtime libraries are emitted as these are instead provided dynamically on Android targets.
This patch updates sanitizier support definitions for Android inside the
compiler. It also adjusts the logic to make sure no pre-built sanitizer
runtime libraries are emitted as these are instead provided dynamically
on Android targets.
On later stages, the feature is already stable.
Result of running:
rg -l "feature.let_else" compiler/ src/librustdoc/ library/ | xargs sed -s -i "s#\\[feature.let_else#\\[cfg_attr\\(bootstrap, feature\\(let_else\\)#"
Initial implementation of dyn*
This PR adds extremely basic and incomplete support for [dyn*](https://smallcultfollowing.com/babysteps//blog/2022/03/29/dyn-can-we-make-dyn-sized/). The goal is to get something in tree behind a flag to make collaboration easier, and also to make sure the implementation so far is not unreasonable. This PR does quite a few things:
* Introduce `dyn_star` feature flag
* Adds parsing for `dyn* Trait` types
* Defines `dyn* Trait` as a sized type
* Adds support for explicit casts, like `42usize as dyn* Debug`
* Including const evaluation of such casts
* Adds codegen for drop glue so things are cleaned up properly when a `dyn* Trait` object goes out of scope
* Adds codegen for method calls, at least for methods that take `&self`
Quite a bit is still missing, but this gives us a starting point. Note that this is never intended to become stable surface syntax for Rust, but rather `dyn*` is planned to be used as an implementation detail for async functions in dyn traits.
Joint work with `@nikomatsakis` and `@compiler-errors.`
r? `@bjorn3`
Add support for MIPS VZ ISA extension
[Link to relevant LLVM line where virt extension is specified](83fab8cee9/llvm/lib/Target/Mips/Mips.td (L172-L173))
This has been tested on mips-unknown-linux-musl with a target-cpu that is >= MIPS32 5 and `target-features=+virt`. The example was checked in a disassembler to ensure the correct assembly sequence was being generated using the virtualization instructions.
Needed additional work:
* MIPS is missing from [the Rust reference CPU feature lists](https://doc.rust-lang.org/reference/attributes/codegen.html#available-features)
Example docs for later:
```md
#### `mips` or `mips64`
This platform requires that `#[target_feature]` is only applied to [`unsafe`
functions][unsafe function]. This target's feature support is currently unstable
and must be enabled by `#![feature(mips_target_feature)]` ([Issue #44839])
[Issue #44839]: https://github.com/rust-lang/rust/issues/44839
Further documentation on these features can be found in the [MIPS Instruction Set
Reference Manual], or elsewhere on [mips.com].
[MIPS Instruction Set Reference Manual]: https://s3-eu-west-1.amazonaws.com/downloads-mips/documents/MD00086-2B-MIPS32BIS-AFP-6.06.pdf
[developer.arm.com]: https://www.mips.com/products/architectures/ase/
Feature | Implicitly Enables | Description
---------------|--------------------|-------------------
`fp64` | | 64-bit Floating Point
`msa` | | "MIPS SIMD Architecture"
`virt` | | Virtualization instructions (VZ ASE)
```
If the above is good I can also submit a PR for that if there's interest in documenting it while it's still unstable. Otherwise that can be dropped, I just wrote it before realizing it was possibly not a good idea.
Relevant to #44839
change rlib format to distinguish native dependencies
Another one method to solve problem mentioned in #99429.
Changed .rlib format, it contains all bundled native libraries as archieves.
At link time rlib is unpacked and native dependencies linked separately.
New behavior hidden under separate_native_rlib_dependencies flag.
ssa: implement `#[collapse_debuginfo]`
cc #39153rust-lang/compiler-team#386
Debuginfo line information for macro invocations are collapsed by default - line information are replaced by the line of the outermost expansion site. Using `-Zdebug-macros` disables this behaviour.
When the `collapse_debuginfo` feature is enabled, the default behaviour is reversed so that debuginfo is not collapsed by default. In addition, the `#[collapse_debuginfo]` attribute is available and can be applied to macro definitions which will then have their line information collapsed.
r? rust-lang/wg-debugging
The `<*const T>::guaranteed_*` methods now return an option for the unknown case
cc https://github.com/rust-lang/rust/issues/53020#issuecomment-1236932443
I chose `0` for "not equal" and `1` for "equal" and left `2` for the unknown case so backends can just forward to raw pointer equality and it works ✨
r? `@fee1-dead` or `@lcnr`
cc `@rust-lang/wg-const-eval`
Debuginfo line information for macro invocations are collapsed by
default - line information are replaced by the line of the outermost
expansion site. Using `-Zdebug-macros` disables this behaviour.
When the `collapse_debuginfo` feature is enabled, the default behaviour
is reversed so that debuginfo is not collapsed by default. In addition,
the `#[collapse_debuginfo]` attribute is available and can be applied to
macro definitions which will then have their line information collapsed.
Signed-off-by: David Wood <david.wood@huawei.com>
Support `#[unix_sigpipe = "inherit|sig_dfl"]` on `fn main()` to prevent ignoring `SIGPIPE`
When enabled, programs don't have to explicitly handle `ErrorKind::BrokenPipe` any longer. Currently, the program
```rust
fn main() { loop { println!("hello world"); } }
```
will print an error if used with a short-lived pipe, e.g.
% ./main | head -n 1
hello world
thread 'main' panicked at 'failed printing to stdout: Broken pipe (os error 32)', library/std/src/io/stdio.rs:1016:9
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
by enabling `#[unix_sigpipe = "sig_dfl"]` like this
```rust
#![feature(unix_sigpipe)]
#[unix_sigpipe = "sig_dfl"]
fn main() { loop { println!("hello world"); } }
```
there is no error, because `SIGPIPE` will not be ignored and thus the program will be killed appropriately:
% ./main | head -n 1
hello world
The current libstd behaviour of ignoring `SIGPIPE` before `fn main()` can be explicitly requested by using `#[unix_sigpipe = "sig_ign"]`.
With `#[unix_sigpipe = "inherit"]`, no change at all is made to `SIGPIPE`, which typically means the behaviour will be the same as `#[unix_sigpipe = "sig_dfl"]`.
See https://github.com/rust-lang/rust/issues/62569 and referenced issues for discussions regarding the `SIGPIPE` problem itself
See the [this](https://rust-lang.zulipchat.com/#narrow/stream/219381-t-libs/topic/Proposal.3A.20First.20step.20towards.20solving.20the.20SIGPIPE.20problem) Zulip topic for more discussions, including about this PR.
Tracking issue: https://github.com/rust-lang/rust/issues/97889
compiler/rustc_codegen_ssa/src/mir/place.rs: Remove LLVM bug workaround
This memset was inserted as a workaround to Rust issue #34427, which was
an LLVM bug that apparently no longer manifests.
Fix a bunch of typo
This PR will fix some typos detected by [typos].
I only picked the ones I was sure were spelling errors to fix, mostly in
the comments.
[typos]: https://github.com/crate-ci/typos
translations(rustc_session): migrates `rustc_session` to use `SessionDiagnostic` - Pt. 1
## Description
This is the first PR for the migration of the module `rustc_session`. You can follow my progress [here](https://github.com/rust-lang/rust/issues/100717#issuecomment-1220279883).
The PR migrates the files `cgu_reuse_tracker` and `parse.rs` to use `SessionDiagnostic `.
This PR will fix some typos detected by [typos].
I only picked the ones I was sure were spelling errors to fix, mostly in
the comments.
[typos]: https://github.com/crate-ci/typos
Move the cast_float_to_int fallback code to GCC
Now that we require at least LLVM 13, that codegen backend is always
using its intrinsic `fptosi.sat` and `fptoui.sat` conversions, so it
doesn't need the manual implementation. However, the GCC backend still
needs it, so we can move all of that code down there.
Simplify `get_trait_ref` fn used for `virtual_function_elimination`
1. The name `get_trait_ref` is misleading, so I renamed it to something more like `expect_...` because it ICEs if used incorrectly.
2. No need to manually go through the existential trait refs, we already have `.principal()` for that.
Replace `Body::basic_blocks()` with field access
Since the refactoring in #98930, it is possible to borrow the basic blocks
independently from other parts of MIR by accessing the `basic_blocks` field
directly.
Replace unnecessary `Body::basic_blocks()` method with a direct field access,
which has an additional benefit of borrowing the basic blocks only.
This makes it possible to instruct libstd to never touch the signal
handler for `SIGPIPE`, which makes programs pipeable by default (e.g.
with `./your-program | head -n 1`) without `ErrorKind::BrokenPipe`
errors.
Move EH personality functions to std
These were previously in the panic_unwind crate with dummy stubs in the
panic_abort crate. However it turns out that this is insufficient: we
still need a proper personality function even with -C panic=abort to
handle the following cases:
1) `extern "C-unwind"` still needs to catch foreign exceptions with -C
panic=abort to turn them into aborts. This requires landing pads and a
personality function.
2) ARM EHABI uses the personality function when creating backtraces.
The dummy personality function in panic_abort was causing backtrace
generation to get stuck in a loop since the personality function is
responsible for advancing the unwind state to the next frame.
Fixes#41004
This commit migrates the errors in the function check_expected_reuse
to use the new SessionDiagnostic. It also does some small refactor
for the IncorrectCguReuseType to include the 'at least' word in the
fluent translation file
Because `PassMode::Cast` is by far the largest variant, but is
relatively rare.
This requires making `PassMode` not impl `Copy`, and `Clone` is no
longer necessary. This causes lots of sigil adjusting, but nothing very
notable.
triagebot: add translation-related mention groups
- Move some code around so that triagebot can ping relevant parties when translation logic is modified.
- Add mention groups to triagebot for translation-related files/folders.
- Auto-label pull requests with changes to translation-related files/folders with `A-translation`.
r? `@Mark-Simulacrum`
Now that we require at least LLVM 13, that codegen backend is always
using its intrinsic `fptosi.sat` and `fptoui.sat` conversions, so it
doesn't need the manual implementation. However, the GCC backend still
needs it, so we can move all of that code down there.
Support 1st group of RISC-V Bitmanip backend target features
These target features use the same names as LLVM and `is_riscv_feature_detected!`, they are:
- zba (address generation instructions)
- zbb (basic bit manipulation)
- zbc (carry-less multiplication)
- zbs (single-bit manipulation)
The extension is frozen and ratified, and I don't think we should expect LLVM to change those feature names in the future.
For reference, the specification for the B extension can be found here: https://github.com/riscv/riscv-bitmanip/releases/download/1.0.0/bitmanip-1.0.0-38-g865e7a7.pdf)
On my current project, I see a 7.6% reduction in binary size with these features on, so I have some incentive to try to silence the "unknown feature" warning from `-Ctarget-feature` =)
debuginfo: Generalize C++-like encoding for enums.
The updated encoding should be able to handle niche layouts where more than one variant has fields (as introduced in https://github.com/rust-lang/rust/pull/94075).
The new encoding is more uniform as there is no structural difference between direct-tag, niche-tag, and no-tag layouts anymore. The only difference between those cases is that the "dataful" variant in a niche-tag enum will have a `(start, end)` pair denoting the tag range instead of a single value.
The new encoding now also supports 128-bit tags, which occur in at least some standard library types. These tags are represented as `u64` pairs so that debuggers (which don't always have support for 128-bit integers) can reliably deal with them. The downside is that this adds quite a bit of complexity to the encoding and especially to the corresponding NatVis.
The new encoding seems to increase the size of (x86_64-pc-windows-msvc) debuginfo by 10-15%. The size of binaries is not affected (release builds were built with `-Cdebuginfo=2`, numbers are in kilobytes):
EXE | before | after | relative
-- | -- | -- | --
cargo (debug) | 40453 | 40450 | +0%
ripgrep (debug) | 10275 | 10273 | +0%
cargo (release) | 16186 | 16185 | +0%
ripgrep (release) | 4727 | 4726 | +0%
PDB | before | after | relative
-- | -- | -- | --
cargo (debug) | 236524 | 261412 | +11%
ripgrep (debug) | 53140 | 59060 | +11%
cargo (release) | 148516 | 169620 | +14%
ripgrep (release) | 10676 | 11804 | +11%
Given that the new encoding is more general, this is to be expected. Only platforms using C++-like debuginfo are affected -- which currently is only `*-pc-windows-msvc`.
*TODO*
- [x] Properly update documentation
- [x] Add regression tests for new optimized enum layouts as introduced by #94075.
r? `@wesleywiser`
Just moving code around so that triagebot can ping relevant parties when
translation logic is modified.
Signed-off-by: David Wood <david.wood@huawei.com>
These use the same names as LLVM and is_riscv_feature_detected!:
- zba (address generation instructions)
- zbb (basic bit manipulation)
- zbc (carry-less multiplication)
- zbs (single-bit manipulation)
Fix flags when using clang as linker for Fuchsia
Don't add C runtime or set dynamic linker when linking with clang for
Fuchsia. Clang already does this for us.
Enable function merging when opt is for size
It is, of course, natural to want to merge aliasing functions when
optimizing for code size, since that can eliminate several bytes.
And an exhaustive match helps make the code less brittle.
Closes#98215.
It is, of course, natural to want to merge aliasing functions when
optimizing for code size, since that can eliminate several bytes.
And an exhaustive match helps make the code less brittle.
Rollup of 6 pull requests
Successful merges:
- #98771 (Add support for link-flavor rust-lld for iOS, tvOS and watchOS)
- #98835 (relate `closure_substs.parent_substs()` to parent fn in NLL)
- #99746 (Use `TraitEngine` in more places that don't specifically need `FulfillmentContext::new_in_snapshot`)
- #99786 (Recover from C++ style `enum struct`)
- #99795 (Delay a bug when failed to normalize trait ref during specialization)
- #100029 (Prevent ICE for `doc_alias` on match arm, statement, expression)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
This adds support for rust-lld for Apple *OS targets.
This was tested against targets "aarch64-apple-ios" and "aarch64-apple-ios-sim".
For targets "armv7-apple-ios" and "armv7s-apple-ios", it doesn't link because of
"symbols.o" not being generated with the correct CPU subtype (changes in
the "object" crate needs to be done to support it).
Limit symbols exported from proc macros
Only `__rustc_proc_macro_decls_*__` and `rust_metadata_*` need to be
exported for proc macros to work. All other symbols only increase binary
size and have the potential to conflict with symbols from the host
compiler.
Fixes https://github.com/rust-lang/rust/issues/99909Fixes#59998
cc `@eddyb`
Introduce an ArchiveBuilderBuilder
This avoids monomorphizing all linker code for each codegen backend and will allow passing in extra information to the archive builder from the codegen backend. I'm going to use this in https://github.com/rust-lang/rust/pull/97485 to allow passing in the right function to extract symbols from object files to a generic archive builder to be used by cg_llvm, cg_clif and cg_gcc.
Only __rustc_proc_macro_decls_*__ and rust_metadata_* need to be
exported for proc macros to work. All other symbols only increase binary
size and have the potential to conflict with symbols from the host
compiler.
LLVM 15 compatibility fixes
These are LLVM 15 compatibility fixes split out from #99464. There are three changes here:
* Emit elementtype attribtue for ldrex/strex intrinsics. This is requires as part of the opaque pointers migration.
* Make more tests compatible with opaque pointers. These are either new or aren't run on x86.
* Remove a test for `#[rustc_allocator]`. Since #99574 there are more requirement on the function signature. I dropped the test entirely, since we already test the effect of the attribute elsewhere.
* The main change: When a worker thread emits an error, wait for other threads to finish before unwinding the main thread and exiting. Otherwise workers may end up using globals for which destructors have already been run. This was probably never quite correct, but became an active problem with LLVM 15, because it started using global dtors in critical places, as part of ManagedStatic removal.
Fixes#99432 (and probably also #95679).
r? `@cuviper`
This avoids monomorphizing all linker code for each codegen backend and
will allow passing in extra information to the archive builder from the
codegen backend.
Replace the separate AbortCodegenOnDrop guard by integrating this
functionality into OngoingCodegen (or rather, the Coordinator part
of it). This ensures that we send a CodegenAborted message and
wait for workers to finish even if the panic occurs outside
codegen_crate() (e.g. inside join_codegen()).
This requires some minor changes to the handling of CodegenAborted,
as it can now occur when the main thread is LLVMing rather than
Codegenning.
Enable raw-dylib for bin crates
Fixes#93842
When `raw-dylib` is used in a `bin` crate, we need to collect all of the `raw-dylib` functions, generate the import library and add that to the linker command line.
I also changed the tests so that 1) the C++ dlls are created after the Rust dlls, thus there is no chance of accidentally using them in the Rust linking process and 2) disabled generating import libraries when building with MSVC.
Simplify some code that depend on Deref
Now that we can assume #97025 works, it's safe to expect Deref is always in the first place of projections. With this, I was able to simplify some code that depended on Deref's place in projections. When we are able to move Derefer before `ElaborateDrops` successfully we will be able to optimize more places.
r? `@oli-obk`
Add `sign-ext` target feature to the WASM target
Some target features are still missing from that list.
See #97808 for basically the same PR by `@alexcrichton.`
Related issue: #96472.
PR introducing this issue: #87402.
Upgrade indexmap and thorin-dwp to use hashbrown 0.12
This removes the last dependencies on hashbrown 0.11.
This also upgrades to hashbrown 0.12.3 to fix a double-free (#99372).
Add fine-grained LLVM CFI support to the Rust compiler
This PR improves the LLVM Control Flow Integrity (CFI) support in the Rust compiler by providing forward-edge control flow protection for Rust-compiled code only by aggregating function pointers in groups identified by their return and parameter types.
Forward-edge control flow protection for C or C++ and Rust -compiled code "mixed binaries" (i.e., for when C or C++ and Rust -compiled code share the same virtual address space) will be provided in later work as part of this project by identifying C char and integer type uses at the time types are encoded (see Type metadata in the design document in the tracking issue https://github.com/rust-lang/rust/issues/89653).
LLVM CFI can be enabled with -Zsanitizer=cfi and requires LTO (i.e., -Clto).
Thank you again, `@eddyb,` `@nagisa,` `@pcc,` and `@tmiasko` for all the help!
This commit improves the LLVM Control Flow Integrity (CFI) support in
the Rust compiler by providing forward-edge control flow protection for
Rust-compiled code only by aggregating function pointers in groups
identified by their return and parameter types.
Forward-edge control flow protection for C or C++ and Rust -compiled
code "mixed binaries" (i.e., for when C or C++ and Rust -compiled code
share the same virtual address space) will be provided in later work as
part of this project by identifying C char and integer type uses at the
time types are encoded (see Type metadata in the design document in the
tracking issue #89653).
LLVM CFI can be enabled with -Zsanitizer=cfi and requires LTO (i.e.,
-Clto).
Fix unreachable coverage generation for inlined functions
To generate a function coverage we need at least one coverage counter,
so a coverage from unreachable blocks is retained only when some live
counters remain.
The previous implementation incorrectly retained unreachable coverage,
because it didn't account for the fact that those live counters can
belong to another function due to inlining.
Fixes#98833.
make vtable pointers entirely opaque
This implements the scheme discussed in https://github.com/rust-lang/unsafe-code-guidelines/issues/338: vtable pointers should be considered entirely opaque and not even readable by Rust code, similar to function pointers.
- We have a new kind of `GlobalAlloc` that symbolically refers to a vtable.
- Miri uses that kind of allocation when generating a vtable.
- The codegen backends, upon encountering such an allocation, call `vtable_allocation` to obtain an actually dataful allocation for this vtable.
- We need new intrinsics to obtain the size and align from a vtable (for some `ptr::metadata` APIs), since direct accesses are UB now.
I had to touch quite a bit of code that I am not very familiar with, so some of this might not make much sense...
r? `@oli-obk`
Allow to disable thinLTO buffer to support lto-embed-bitcode lld feature
Hello
This change is to fix issue (https://github.com/rust-lang/rust/issues/84395) in which passing "-lto-embed-bitcode=optimized" to lld when linking rust code via linker-plugin-lto doesn't produce the expected result.
Instead of emitting a single unified module into a llvmbc section of the linked elf, it emits multiple submodules.
This is caused because rustc emits the BC modules after running llvm `createWriteThinLTOBitcodePass` pass.
Which in turn triggers a thinLTO linkage and causes the said issue.
This patch allows via compiler flag (-Cemit-thin-lto=<bool>) to select between running `createWriteThinLTOBitcodePass` and `createBitcodeWriterPass`.
Note this pattern of selecting between those 2 passes is common inside of LLVM code.
The default is to match the old behavior.
Only compile #[used] as llvm.compiler.used for ELF targets
This returns `#[used]` to how it worked prior to the LLVM 13 update. The intention is not that this is a stable promise.
I'll add tests later today. The tests will test things that we don't actually promise, though.
It's a deliberately small patch, mostly comments. And assuming it's reviewed and lands in time, IMO it should at least be considered for uplifting to beta (so that it can be in 1.59), as the change broke many crates in the ecosystem, even if they are relying on behavior that is not guaranteed.
# Background
LLVM has two ways of preventing removal of an unused variable: `llvm.compiler.used`, which must be present in object files, but allows the linker to remove the value, and `llvm.used` which is supposed to apply to the linker as well, if possible.
Prior to LLVM 13, `llvm.used` and `llvm.compiler.used` were the same on ELF targets, although they were different elsewhere. Prior to our update to LLVM 13, we compiled `#[used]` using `llvm.used` unconditionally, even though we only ever promised behavior like `llvm.compiler.used`.
In LLVM 13, ELF targets gained some support for preventing linker removal of `llvm.used` via the SHF_RETAIN section flag. This has some compatibility issues though: Concretely: some older versions `ld.gold` (specifically ones prior to v2.36, released in Jan 2021) had a bug where it would fail to place a `#[used] #[link_section = ".init_array"]` static in between `__init_array_start`/`__init_array_end`, leading to code that does this failing to run a static constructor. This is technically not a thing we guarantee will work, is a common use case, and is needed in `libstd` (for example, to get access to `std::env::args()` even if Rust does not control `main`, such as when in a `cdylib` crate).
As a result, when updating to LLVM 13, we unconditionally switched to using `llvm.compiler.used`, which mirror the guarantees we make for `#[used]` and doesn't require the latest ld.gold. Unfortunately, this happened to break quite a bit of things in the ecosystem, as non-ELF targets had come to rely on `#[used]` being slightly stronger. In particular, there are cases where it will even break static constructors on these targets[^initinit] (and in fact, breaks way more use cases, as Mach-O uses special sections as an interface to the OS/linker/loader in many places).
As a result, we only switch to `llvm.compiler.used` on ELF[^elfish] targets. The rationale here is:
1. It is (hopefully) identical to the semantics we used prior to the LLVM13 update as prior to that update we unconditionally used `llvm.used`, but on ELF `llvm.used` was the same as `llvm.compiler.used`.
2. It seems to be how Clang compiles this, and given that they have similar (but stronger) compatibility promises, that makes sense.
[^initinit]: For Mach-O targets: It is not always guaranteed that `__DATA,__mod_init_func` is a GC root if it does not have the `S_MOD_INIT_FUNC_POINTERS` flag which we cannot add. In most cases, when ld64 transformed this section into `__DATA_CONST,__mod_init_func` it gets applied, but it's not clear that that is intentional (let alone guaranteed), and the logic is complex enough that it probably happens sometimes, and people in the wild report it occurring.
[^elfish]: Actually, there's not a great way to tell if it's ELF, so I've approximated it.
This is pretty ad-hoc and hacky! We probably should have a firmer set of guarantees here, but this change should relax the pressure on coming up with that considerably, returning it to previous levels.
---
Unsure who should review so leaving it open, but for sure CC `@nikic`
Use constant eval to do strict mem::uninit/zeroed validity checks
I'm not sure about the code organisation here, I just dumped the check in rustc_const_eval at the root. Not hard to move it elsewhere, in any case.
Also, this means cranelift codegen intrinsics lose the strict checks, since they don't seem to depend on rustc_const_eval, and I didn't see a point in keeping around two copies.
I also left comments in the is_zero_valid methods about "uhhh help how do i do this", those apply to both methods equally.
Also rustc_codegen_ssa now depends on rustc_const_eval... is this okay?
Pinging `@RalfJung` since you were the one who mentioned this to me, so I'm assuming you're interested.
Haven't had a chance to run full tests on this since it's really warm, and it's 1AM, I'll check out any failures/comments in the morning :)
Stop keeping metadata in memory before writing it to disk
Fixes#96358
I created this PR according with the instruction given in the issue except for the following points:
- While the issue says "Write metadata into the temporary file in `encode_and_write_metadata` even if `!need_metadata_file`", I could not do that. That is because though I tried to do that and run `x.py test`, I got a lot of test failures as follows.
<details>
<summary>List of failed tests</summary>
<pre>
<code>
failures:
[ui] src/test/ui/json-multiple.rs
[ui] src/test/ui/json-options.rs
[ui] src/test/ui/rmeta/rmeta-rpass.rs
[ui] src/test/ui/save-analysis/emit-notifications.rs
[ui] src/test/ui/svh/changing-crates.rs
[ui] src/test/ui/svh/svh-change-lit.rs
[ui] src/test/ui/svh/svh-change-significant-cfg.rs
[ui] src/test/ui/svh/svh-change-trait-bound.rs
[ui] src/test/ui/svh/svh-change-type-arg.rs
[ui] src/test/ui/svh/svh-change-type-ret.rs
[ui] src/test/ui/svh/svh-change-type-static.rs
[ui] src/test/ui/svh/svh-use-trait.rs
test result: FAILED. 12915 passed; 12 failed; 100 ignored; 0 measured; 0 filtered out; finished in 71.41s
Some tests failed in compiletest suite=ui mode=ui host=x86_64-unknown-linux-gnu target=x86_64-unknown-linux-gnu
Build completed unsuccessfully in 0:01:58
</code>
</pre>
</details>
- I could not resolve the extra tasks about `create_rmeta_file` and `create_compressed_metadata_file` for my lack of ability.
Adding the option to control from rustc CLI
if the resulted ".o" bitcode module files are with
thinLTO info or regular LTO info.
Allows using "-lto-embed-bitcode=optimized" during linkage
correctly.
Signed-off-by: Ziv Dunkelman <ziv.dunkelman@nextsilicon.com>
Keep unstable target features for asm feature checking
Inline assembly uses the target features to determine which registers
are available on the current target. However it needs to be able to
access unstable target features for this.
Fixes#99071
Inline assembly uses the target features to determine which registers
are available on the current target. However it needs to be able to
access unstable target features for this.
Fixes#99071
There are several indications that we should not ZST as a ScalarInt:
- We had two ways to have ZST valtrees, either an empty `Branch` or a `Leaf` with a ZST in it.
`ValTree::zst()` used the former, but the latter could possibly arise as well.
- Likewise, the interpreter had `Immediate::Uninit` and `Immediate::Scalar(Scalar::ZST)`.
- LLVM codegen already had to special-case ZST ScalarInt.
So instead add new ZST variants to those types that did not have other variants
which could be used for this purpose.
Use less string interning
This removes string interning in a couple of places where doing so won't result in perf improvements. I also switched one place to use pre-interned symbols.
Make lowering a query
Split from https://github.com/rust-lang/rust/pull/88186.
This PR refactors the relationship between lowering and the resolver outputs in order to make lowering itself a query.
In a first part, lowering is changed to avoid modifying resolver outputs, by maintaining its own data structures for creating new `NodeId`s and so.
Then, the `TyCtxt` is modified to allow creating new `LocalDefId`s from inside it. This is done by:
- enclosing `Definitions` in a lock, so as to allow modification;
- creating a query `register_def` whose purpose is to declare a `LocalDefId` to the query system.
See `TyCtxt::create_def` and `TyCtxt::iter_local_def_id` for more detailed explanations of the design.
Make MIR basic blocks field public
This makes it possible to mutably borrow different fields of the MIR
body without resorting to methods like `basic_blocks_local_decls_mut_and_var_debug_info`.
To preserve validity of control flow graph caches in the presence of
modifications, a new struct `BasicBlocks` wraps together basic blocks
and control flow graph caches.
The `BasicBlocks` dereferences to `IndexVec<BasicBlock, BasicBlockData>`.
On the other hand a mutable access requires explicit `as_mut()` call.
incr: cache dwarf objects in work products
Cache DWARF objects alongside object files in work products when those exist so that DWARF object files are available for thorin in packed mode in incremental scenarios.
r? `@michaelwoerister`
rustc_codegen_ssa: use `project_index`, not `project_field`, for array literals.
See https://github.com/rust-lang/rust/pull/98615#issuecomment-1170082774 for some context.
In short, we were using `project_field` even for array `mir::Rvalue::Aggregate`s, which results in benchmarks like `deep-vector.rs` (and presumably also some real-world usecases?) being impacted by how we handle non-array aggregate fields.
(This is a separate PR so that we can measure the perf effects in isolation)
r? `@nikic`
Allow arithmetic and certain bitwise ops on AtomicPtr
This is mainly to support migrating from `AtomicUsize`, for the strict provenance experiment.
This is a pretty dubious set of APIs, but it should be sufficient to allow code that's using `AtomicUsize` to manipulate a tagged pointer atomically. It's under a new feature gate, `#![feature(strict_provenance_atomic_ptr)]`, but I'm not sure if it needs its own tracking issue. I'm happy to make one, but it's not clear that it's needed.
I'm unsure if it needs changes in the various non-LLVM backends. Because we just cast things to integers anyway (and were already doing so), I doubt it.
API change proposal: https://github.com/rust-lang/libs-team/issues/60Fixes#95492
Compiling with `-Csplit-debuginfo=packed` was leaving behind `.dwo`
files because either the metadata or allocator module contained a DWARF
object which was not being removed by the
`maybe_remove_temps_from_module` closure.
Cache DWARF objects alongside object files in work products when those
exist so that DWARF object files are available for thorin in packed mode
in incremental scenarios.
Signed-off-by: David Wood <david.wood@huawei.com>
Change enum->int casts to not go through MIR casts.
follow-up to https://github.com/rust-lang/rust/pull/96814
this simplifies all backends and even gives LLVM more information about the return value of `Rvalue::Discriminant`, enabling optimizations in more cases.
Enable MIR inlining
Continuation of https://github.com/rust-lang/rust/pull/82280 by `@wesleywiser.`
#82280 has shown nice compile time wins could be obtained by enabling MIR inlining.
Most of the issues in https://github.com/rust-lang/rust/issues/81567 are now fixed,
except the interaction with polymorphization which is worked around specifically.
I believe we can proceed with enabling MIR inlining in the near future
(preferably just after beta branching, in case we discover new issues).
Steps before merging:
- [x] figure out the interaction with polymorphization;
- [x] figure out how miri should deal with extern types;
- [x] silence the extra arithmetic overflow warnings;
- [x] remove the codegen fulfilment ICE;
- [x] remove the type normalization ICEs while compiling nalgebra;
- [ ] tweak the inlining threshold.
Added llvm lifetime annotations to function call argument temporaries.
The goal of this change is to ensure that llvm will do stack slot
optimization on these temporaries. This ensures that in code like:
```rust
const A: [u8; 1024] = [0; 1024];
fn copy_const() {
f(A);
f(A);
}
```
we only use 1024 bytes of stack space, instead of 2048 bytes.
I am new to developing for the rust compiler, and as such not entirely sure, but I believe this should be sufficient to close#98156.
Also, this does not contain a test case to ensure this keeps working, primarily because I am not sure how to go about testing this. I would love some suggestions as to how that could be approached.
Simplify memory ordering intrinsics
This changes the names of the atomic intrinsics to always fully include their memory ordering arguments.
```diff
- atomic_cxchg
+ atomic_cxchg_seqcst_seqcst
- atomic_cxchg_acqrel
+ atomic_cxchg_acqrel_release
- atomic_cxchg_acqrel_failrelaxed
+ atomic_cxchg_acqrel_relaxed
// And so on.
```
- `seqcst` is no longer implied
- The failure ordering on chxchg is no longer implied in some cases, but now always explicitly part of the name.
- `release` is no longer shortened to just `rel`. That was especially confusing, since `relaxed` also starts with `rel`.
- `acquire` is no longer shortened to just `acq`, such that the names now all match the `std::sync::atomic::Ordering` variants exactly.
- This now allows for more combinations on the compare exchange operations, such as `atomic_cxchg_acquire_release`, which is necessary for #68464.
- This PR only exposes the new possibilities through unstable intrinsics, but not yet through the stable API. That's for [a separate PR](https://github.com/rust-lang/rust/pull/98383) that requires an FCP.
Suffixes for operations with a single memory order:
| Order | Before | After |
|---------|--------------|------------|
| Relaxed | `_relaxed` | `_relaxed` |
| Acquire | `_acq` | `_acquire` |
| Release | `_rel` | `_release` |
| AcqRel | `_acqrel` | `_acqrel` |
| SeqCst | (none) | `_seqcst` |
Suffixes for compare-and-exchange operations with two memory orderings:
| Success | Failure | Before | After |
|---------|---------|--------------------------|--------------------|
| Relaxed | Relaxed | `_relaxed` | `_relaxed_relaxed` |
| Relaxed | Acquire | ❌ | `_relaxed_acquire` |
| Relaxed | SeqCst | ❌ | `_relaxed_seqcst` |
| Acquire | Relaxed | `_acq_failrelaxed` | `_acquire_relaxed` |
| Acquire | Acquire | `_acq` | `_acquire_acquire` |
| Acquire | SeqCst | ❌ | `_acquire_seqcst` |
| Release | Relaxed | `_rel` | `_release_relaxed` |
| Release | Acquire | ❌ | `_release_acquire` |
| Release | SeqCst | ❌ | `_release_seqcst` |
| AcqRel | Relaxed | `_acqrel_failrelaxed` | `_acqrel_relaxed` |
| AcqRel | Acquire | `_acqrel` | `_acqrel_acquire` |
| AcqRel | SeqCst | ❌ | `_acqrel_seqcst` |
| SeqCst | Relaxed | `_failrelaxed` | `_seqcst_relaxed` |
| SeqCst | Acquire | `_failacq` | `_seqcst_acquire` |
| SeqCst | SeqCst | (none) | `_seqcst_seqcst` |
rustc_target: Remove some redundant target properties
`is_like_emscripten` is equivalent to `os == "emscripten"`, so it's removed.
`is_like_fuchsia` is equivalent to `os == "fuchsia"`, so it's removed.
`is_like_osx` also falls into the same category and is equivalent to `vendor == "apple"`, but it's commonly used so I kept it as is for now.
`is_like_(solaris,windows,wasm)` are combinations of different operating systems or architectures (see compiler/rustc_target/src/spec/tests/tests_impl.rs) so they are also kept as is.
I think `is_like_wasm` (and maybe `is_like_osx`) are sufficiently closed sets, so we can remove these fields as well and replace them with methods like `fn is_like_wasm() { arch == "wasm32" || arch == "wasm64" }`.
On other hand, `is_like_solaris` and `is_like_windows` are sufficiently open and I can imagine custom targets introducing other values for `os`.
This is kind of a gray area.
Update no_default_libraries handling for emscripten target
```@sbc100``` says:
> `-sDEFAULT_LIBRARY_FUNCS_TO_INCLUDE=[]` is almost certainly wrong/out-of-date. This setting defaults to the empty list anyway these days so its redundant. Also we now support `-nodefaultlibs` so you can use that, as with other toolchains.
https://github.com/rust-lang/rust/issues/98303#issuecomment-1162163684
The goal of this change is to ensure that llvm will do stack slot
optimization on these temporaries. This ensures that in code like:
```rust
const A: [u8; 1024] = [0; 1024];
fn copy_const() {
f(A);
f(A);
}
```
we only use 1024 bytes of stack space, instead of 2048 bytes.
Remove the source archive functionality of ArchiveWriter
We now build archives through strictly additive means rather than taking an existing archive and potentially substracting parts. This is simpler and makes it easier to swap out the archive writer in https://github.com/rust-lang/rust/pull/97485.
Remove dereferencing of Box from codegen
Through #94043, #94414, #94873, and #95328, I've been fixing issues caused by Box being treated like a pointer when it is not a pointer. However, these PRs just introduced special cases for Box. This PR removes those special cases and instead transforms a deref of Box into a deref of the pointer it contains.
Hopefully, this is the end of the Box<T, A> ICEs.
once cell renamings
This PR does the renamings proposed in https://github.com/rust-lang/rust/issues/74465#issuecomment-1153703128
- Move/rename `lazy::{OnceCell, Lazy}` to `cell::{OnceCell, LazyCell}`
- Move/rename `lazy::{SyncOnceCell, SyncLazy}` to `sync::{OnceLock, LazyLock}`
(I used `Lazy...` instead of `...Lazy` as it seems to be more consistent, easier to pronounce, etc)
```@rustbot``` label +T-libs-api -T-libs
Emscripten target: replace -g4 with -g, and -g3 with --profiling-funcs
Emscripten prints the following warning:
```
emcc: warning: please replace -g4 with -gsource-map [-Wdeprecated]
```
`@sbc100`
Move `finish` out of the `Encoder` trait.
This simplifies things, but requires making `CacheEncoder` non-generic.
(This was previously merged as commit 4 in #94732 and then was reverted
in #97905 because it caused a perf regression.)
r? `@ghost`
Support lint expectations for `--force-warn` lints (RFC 2383)
Rustc has a `--force-warn` flag, which overrides lint level attributes and forces the diagnostics to always be warn. This means, that for lint expectations, the diagnostic can't be suppressed as usual. This also means that the expectation would not be fulfilled, even if a lint had been triggered in the expected scope.
This PR now also tracks the expectation ID in the `ForceWarn` level. I've also made some minor adjustments, to possibly catch more bugs and make the whole implementation more robust.
This will probably conflict with https://github.com/rust-lang/rust/pull/97718. That PR should ideally be reviewed and merged first. The conflict itself will be trivial to fix.
---
r? `@wesleywiser`
cc: `@flip1995` since you've helped with the initial review and also discussed this topic with me. 🙃
Follow-up of: https://github.com/rust-lang/rust/pull/87835
Issue: https://github.com/rust-lang/rust/issues/85549
Yeah, and that's it.
This simplifies things, but requires making `CacheEncoder` non-generic.
(This was previously merged as commit 4 in #94732 and then was reverted
in #97905 because it caused a perf regression.)
Rename rustc_serialize::opaque::Encoder as MemEncoder.
This avoids the name clash with `rustc_serialize::Encoder` (a trait),
and allows lots qualifiers to be removed and imports to be simplified
(e.g. fewer `as` imports).
(This was previously merged as commit 5 in #94732 and then was reverted
in #97905 because of a perf regression caused by commit 4 in #94732.)
r? ```@bjorn3```
Use unchecked mul to compute slice sizes
This allows LLVM to realize that `slice.len() > 0` iff `slice.len() * size_of::<T>() > 0`, allowing a branch on the latter to be folded into the former when dropping vecs and boxed slices, in some cases.
Fixes (partially) #96497
Add the intrinsic
declare {i8*, i1} @llvm.type.checked.load(i8* %ptr, i32 %offset, metadata %type)
This is used in the VFE optimization when lowering loading functions
from vtables to LLVM IR. The `metadata` is used to map the function to
all vtables this function could belong to. This ensures that functions
from vtables that might be used somewhere won't get removed.
Rename the `ConstS::val` field as `kind`.
And likewise for the `Const::val` method.
Because its type is called `ConstKind`. Also `val` is a confusing name
because `ConstKind` is an enum with seven variants, one of which is
called `Value`. Also, this gives consistency with `TyS` and `PredicateS`
which have `kind` fields.
The commit also renames a few `Const` variables from `val` to `c`, to
avoid confusion with the `ConstKind::Value` variant.
r? `@BoxyUwU`
