Account for C string literals and `format_args` in `HiddenUnicodeCodepoints` lint
This is stacked on #134955, and either that can land first or both of them can land together here. I split this out because this is a bit more involved of an impl.
Fixes#94945
Precedence improvements: closures and jumps
This PR fixes some cases where rustc's pretty printers would redundantly parenthesize expressions that didn't need it.
<table>
<tr><th>Before</th><th>After</th></tr>
<tr><td><code>return (|x: i32| x)</code></td><td><code>return |x: i32| x</code></td></tr>
<tr><td><code>(|| -> &mut () { std::process::abort() }).clone()</code></td><td><code>|| -> &mut () { std::process::abort() }.clone()</code></td></tr>
<tr><td><code>(continue) + 1</code></td><td><code>continue + 1</code></td></tr>
</table>
Tested by `echo "fn main() { let _ = $AFTER; }" | rustc -Zunpretty=expanded /dev/stdin`.
The pretty-printer aims to render the syntax tree as it actually exists in rustc, as faithfully as possible, in Rust syntax. It can insert parentheses where forced by Rust's grammar in order to preserve the meaning of a macro-generated syntax tree, for example in the case of `a * $rhs` where $rhs is `b + c`. But for any expression parsed from source code, without a macro involved, there should never be a reason for inserting additional parentheses not present in the original.
For closures and jumps (return, break, continue, yield, do yeet, become) the unneeded parentheses came from the precedence of some of these expressions being misidentified. In the same order as the table above:
- Jumps and closures are supposed to have equal precedence. The [Rust Reference](https://doc.rust-lang.org/1.83.0/reference/expressions.html#expression-precedence) says so, and in Syn they do. There is no Rust syntax that would require making a precedence distinction between jumps and closures. But in rustc these were previously 2 distinct levels with the closure being lower, hence the parentheses around a closure inside a jump (but not a jump inside a closure).
- When a closure is written with an explicit return type, the grammar [requires](https://doc.rust-lang.org/1.83.0/reference/expressions/closure-expr.html) that the closure body consists of exactly one block expression, not any other arbitrary expression as usual for closures. Parsing of the closure body does not continue after the block expression. So in `|| { 0 }.clone()` the clone is inside the closure body and applies to `{ 0 }`, whereas in `|| -> _ { 0 }.clone()` the clone is outside and applies to the closure as a whole.
- Continue never needs parentheses. It was previously marked as having the lowest possible precedence but it should have been the highest, next to paths and loops and function calls, not next to jumps.
Overhaul keyword handling
The compiler's list of keywords has some problems.
- It contains several items that aren't keywords.
- The order isn't quite right in a couple of places.
- Some of the names of predicates relating to keywords are confusing.
- rustdoc and rustfmt have their own (incorrect) versions of the keyword list.
- `AllKeywords` is unnecessarily complex.
r? ```@jieyouxu```
`rustc_symbol` is the source of truth for keywords.
rustdoc has its own implicit definition of keywords, via the
`is_doc_keyword`. It (presumably) intends to include all keywords, but
it omits `yeet`.
rustfmt has its own explicit list of Rust keywords. It also (presumably)
intends to include all keywords, but it omits `await`, `builtin`, `gen`,
`macro_rules`, `raw`, `reuse`, `safe`, and `yeet`. Also, it does linear
searches through this list, which is inefficient.
This commit fixes all of the above problems by introducing a new
predicate `is_any_keyword` in rustc and using it in rustdoc and rustfmt.
It documents that it's not the right predicate in most cases.
`rustc_span::symbol` defines some things that are re-exported from
`rustc_span`, such as `Symbol` and `sym`. But it doesn't re-export some
closely related things such as `Ident` and `kw`. So you can do `use
rustc_span::{Symbol, sym}` but you have to do `use
rustc_span::symbol::{Ident, kw}`, which is inconsistent for no good
reason.
This commit re-exports `Ident`, `kw`, and `MacroRulesNormalizedIdent`,
and changes many `rustc_span::symbol::` qualifiers in `compiler/` to
`rustc_span::`. This is a 200+ net line of code reduction, mostly
because many files with two `use rustc_span` items can be reduced to
one.
- Move it to `rustc_parse`, which is the only crate that uses it. This
lets us remove all the `pub` markers from it.
- Change `next_ref` and `look_ahead` to `get` and `bump`, which work
better for the `rustc_parse` uses.
- This requires adding a `TokenStream::get` method, which is simple.
- In `TokenCursor`, we currently duplicate the
`DelimSpan`/`DelimSpacing`/`Delimiter` from the surrounding
`TokenTree::Delimited` in the stack. This isn't necessary so long as
we don't prematurely move past the `Delimited`, and is a small perf
win on a very hot code path.
- In `parse_token_tree`, we clone the relevant `TokenTree::Delimited`
instead of constructing an identical one from pieces.
Currently there are two ways to peek at a `TokenStreamIter`.
- Wrap it in a `Peekable` and use that traits `peek` method.
- Use `TokenStreamIter`'s inherent `peek` method.
Some code uses one, some use the other. This commit converts all places
to the inherent method. This eliminates mixing of `TokenStreamIter` and
`Peekable<TokenStreamIter>` and some use of `impl Iterator` and `dyn
Iterator`.
Because `TokenStreamIter` is a much better name for a `TokenStream`
iterator. Also rename the `TokenStream::trees` method as
`TokenStream::iter`, and some local variables.
Keep track of patterns that could have introduced a binding, but didn't
When we recover from a pattern parse error, or a pattern uses `..`, we keep track of that and affect resolution error for missing bindings that could have been provided by that pattern. We differentiate between `..` and parse recovery. We silence resolution errors likely caused by the pattern parse error.
```
error[E0425]: cannot find value `title` in this scope
--> $DIR/struct-pattern-with-missing-fields-resolve-error.rs:18:30
|
LL | if let Website { url, .. } = website {
| ------------------- this pattern doesn't include `title`, which is available in `Website`
LL | println!("[{}]({})", title, url);
| ^^^^^ not found in this scope
```
Fix#74863.
When we recover from a pattern parse error, or a pattern uses `..`, we keep track of that and affect resolution error for missing bindings that could have been provided by that pattern. We differentiate between `..` and parse recovery. We silence resolution errors likely caused by the pattern parse error.
```
error[E0425]: cannot find value `title` in this scope
--> $DIR/struct-pattern-with-missing-fields-resolve-error.rs:19:30
|
LL | println!("[{}]({})", title, url);
| ^^^^^ not found in this scope
|
note: `Website` has a field `title` which could have been included in this pattern, but it wasn't
--> $DIR/struct-pattern-with-missing-fields-resolve-error.rs:17:12
|
LL | / struct Website {
LL | | url: String,
LL | | title: Option<String> ,
| | ----- defined here
LL | | }
| |_-
...
LL | if let Website { url, .. } = website {
| ^^^^^^^^^^^^^^^^^^^ this pattern doesn't include `title`, which is available in `Website`
```
Fix#74863.
Add AST support for unsafe binders
I'm splitting up #130514 into pieces. It's impossible for me to keep up with a huge PR like that. I'll land type system support for this next, probably w/o MIR lowering, which will come later.
r? `@oli-obk`
cc `@BoxyUwU` and `@lcnr` who also may want to look at this, though this PR doesn't do too much yet
Keep track of parse errors in `mod`s and don't emit resolve errors for paths involving them
When we expand a `mod foo;` and parse `foo.rs`, we now track whether that file had an unrecovered parse error that reached the end of the file. If so, we keep that information around in the HIR and mark its `DefId` in the `Resolver`. When resolving a path like `foo::bar`, we do not emit any errors for "`bar` not found in `foo`", as we know that the parse error might have caused `bar` to not be parsed and accounted for.
When this happens in an existing project, every path referencing `foo` would be an irrelevant compile error. Instead, we now skip emitting anything until `foo.rs` is fixed. Tellingly enough, we didn't have any test for errors caused by expansion of `mod`s with parse errors.
Fix https://github.com/rust-lang/rust/issues/97734.
When we expand a `mod foo;` and parse `foo.rs`, we now track whether that file had an unrecovered parse error that reached the end of the file. If so, we keep that information around. When resolving a path like `foo::bar`, we do not emit any errors for "`bar` not found in `foo`", as we know that the parse error might have caused `bar` to not be parsed and accounted for.
When this happens in an existing project, every path referencing `foo` would be an irrelevant compile error. Instead, we now skip emitting anything until `foo.rs` is fixed. Tellingly enough, we didn't have any test for errors caused by `mod` expansion.
Fix#97734.
Initial implementation of `#[feature(default_field_values]`, proposed in https://github.com/rust-lang/rfcs/pull/3681.
Support default fields in enum struct variant
Allow default values in an enum struct variant definition:
```rust
pub enum Bar {
Foo {
bar: S = S,
baz: i32 = 42 + 3,
}
}
```
Allow using `..` without a base on an enum struct variant
```rust
Bar::Foo { .. }
```
`#[derive(Default)]` doesn't account for these as it is still gating `#[default]` only being allowed on unit variants.
Support `#[derive(Default)]` on enum struct variants with all defaulted fields
```rust
pub enum Bar {
#[default]
Foo {
bar: S = S,
baz: i32 = 42 + 3,
}
}
```
Check for missing fields in typeck instead of mir_build.
Expand test with `const` param case (needs `generic_const_exprs` enabled).
Properly instantiate MIR const
The following works:
```rust
struct S<A> {
a: Vec<A> = Vec::new(),
}
S::<i32> { .. }
```
Add lint for default fields that will always fail const-eval
We *allow* this to happen for API writers that might want to rely on users'
getting a compile error when using the default field, different to the error
that they would get when the field isn't default. We could change this to
*always* error instead of being a lint, if we wanted.
This will *not* catch errors for partially evaluated consts, like when the
expression relies on a const parameter.
Suggestions when encountering `Foo { .. }` without `#[feature(default_field_values)]`:
- Suggest adding a base expression if there are missing fields.
- Suggest enabling the feature if all the missing fields have optional values.
- Suggest removing `..` if there are no missing fields.
Fix MutVisitor's default implementations to visit Stmt's and BinOp's spans
The `Stmt` case is a bug introduced almost certainly unintentionally by https://github.com/rust-lang/rust/pull/126993. The code _used_ to visit and mutate `span` correctly, but got changed as follows by that PR. Notice how `span` is **copied** into the output by `|kind| Stmt { id, kind, span }` which happens after the mutation in the correct code (red) and before the mutation in the incorrect code (green).
```diff
pub fn noop_flat_map_stmt<T: MutVisitor>(
Stmt { kind, mut span, mut id }: Stmt,
vis: &mut T,
) -> SmallVec<[Stmt; 1]> {
vis.visit_id(&mut id);
- vis.visit_span(&mut span);
let stmts: SmallVec<_> = noop_flat_map_stmt_kind(kind, vis)
.into_iter()
.map(|kind| Stmt { id, kind, span })
.collect();
if stmts.len() > 1 {
panic!(...);
}
+ vis.visit_span(&mut span);
stmts
}
```
Change `AttrArgs::Eq` to a struct variant
Cleanups for simplifying https://github.com/rust-lang/rust/pull/131808
Basically changes `AttrArgs::Eq` to a struct variant and then avoids several matches on `AttrArgsEq` in favor of methods on it. This will make future refactorings simpler, as they can either keep methods or switch to field accesses without having to restructure code
Inline ExprPrecedence::order into Expr::precedence
The representation of expression precedence in rustc_ast has been an obstacle to further improvements in the pretty-printer (continuing from #119105 and #119427).
Previously the operation of *"does this expression have lower precedence than that one"* (relevant for parenthesis insertion in macro-generated syntax trees) consisted of 3 steps:
1. Convert `Expr` to `ExprPrecedence` using `.precedence()`
2. Convert `ExprPrecedence` to `i8` using `.order()`
3. Compare using `<`
As far as I can guess, the reason for the separation between `precedence()` and `order()` was so that both `rustc_ast::Expr` and `rustc_hir::Expr` could convert as straightforwardly as possible to the same `ExprPrecedence` enum, and then the more finicky logic performed by `order` could be present just once.
The mapping between `Expr` and `ExprPrecedence` was intended to be as straightforward as possible:
```rust
match self.kind {
ExprKind::Closure(..) => ExprPrecedence::Closure,
...
}
```
although there were exceptions of both many-to-one, and one-to-many:
```rust
ExprKind::Underscore => ExprPrecedence::Path,
ExprKind::Path(..) => ExprPrecedence::Path,
...
ExprKind::Match(_, _, MatchKind::Prefix) => ExprPrecedence::Match,
ExprKind::Match(_, _, MatchKind::Postfix) => ExprPrecedence::PostfixMatch,
```
Where the nature of `ExprPrecedence` becomes problematic is when a single expression kind might be associated with multiple different precedence levels depending on context (outside the expression) and contents (inside the expression). For example consider what is the precedence of an ExprKind::Closure `$closure`. Well, on the left-hand side of a binary operator it would need parentheses in order to avoid the trailing binary operator being absorbed into the closure body: `($closure) + Rhs`, so the precedence is something lower than that of `+`. But on the right-hand side of a binary operator, a closure is just a straightforward prefix expression like a unary op, which is a relatively high precedence level, higher than binops but lower than method calls: `Lhs + $closure` is fine without parens but `($closure).method()` needs them. But as a third case, if the closure contains an explicit return type, then the precedence is an even higher level than that, never needing parenthesization even in a binop left-hand side or method call: `|| -> bool { false } + Rhs` or `|| -> bool { false }.method()`.
You can see that trying to capture all of this resolution about expressions into `ExprPrecedence` violates the intention of `ExprPrecedence` being a straightforward one-to-one correspondence from each AST and HIR `ExprKind` variant. It would be possible to attempt that by doing stuff like `ExprPrecedence::Closure(Side::Leading, ReturnType::No)`, but I don't foresee the original envisioned benefit of the `precedence()`/`order()` distinction being retained in this approach. Instead I want to move toward a model that Syn has been using successfully. In Syn, there is a Precedence enum but it differs from rustc in the following ways:
- There are [relatively few variants](https://github.com/dtolnay/syn/blob/2.0.87/src/precedence.rs#L11-L47) compared to rustc's `ExprPrecedence`. For example there is no distinction at the precedence level between returns and closures, or between loops and method calls.
- We distinguish between [leading](https://github.com/dtolnay/syn/blob/2.0.87/src/fixup.rs#L293) and [trailing](https://github.com/dtolnay/syn/blob/2.0.87/src/fixup.rs#L309) precedence, taking into account an expression's context such as what token follows it (for various syntactic bail-outs in Rust's grammar, like ambiguities around break-with-value) and how it relates to operators from the surrounding syntax tree.
- There are no hardcoded mysterious integer quantities like rustc's `PREC_CLOSURE = -40`. All precedence comparisons are performed via PartialOrd on a C-like enum.
This PR is just a first step in these changes. As you can tell from Syn, I definitely think there is value in having a dedicated type to represent precedence, instead of what `order()` is doing with `i8`. But that is a whole separate adventure because rustc_ast doesn't even agree consistently on `i8` being the type for precedence order; `AssocOp::precedence` instead uses `usize` and there are casts in both directions. It is likely that a type called `ExprPrecedence` will re-appear, but it will look substantially different from the one that existed before this PR.
Add visits to nodes that already have flat_maps in ast::MutVisitor
This PR aims to add `visit_` methods for every node that has a `flat_map_` in MutVisitor, giving implementers free choice over overriding `flat_map` for 1-to-n conversions or `visit` for a 1-to-1.
There is one major problem: `flat_map_stmt`.
While all other default implementations of `flat_map`s are 1-to-1 conversion, as they either only call visits or a internal 1-to-many conversions are natural, `flat_map_stmt` doesn't follow this pattern.
`flat_map_stmt`'s default implementation is a 1-to-n conversion that panics if n > 1 (effectively being a 1-to-[0;1]). This means that it cannot be used as is for a default `visit_stmt`, which would be required to be a 1-to-1.
Implementing `visit_stmt` without runtime checks would require it to reach over a potential `flat_map_item` or `filter_map_expr` overrides and call for their `visit` counterparts directly.
Other than that, if we want to keep the behavior of `flat_map_stmt` it cannot call `visit_stmt` internally.
To me, it seems reasonable to make all default implementations 1-to-1 conversions and let implementers handle `visit_stmt` if they need it, but I don't know if calling `visit` directly when a 1-to-1 is required is ok or not.
related to #128974 & #127615
r? ``@petrochenkov``
Current places where `Interpolated` is used are going to change to
instead use invisible delimiters. This prepares for that.
- It adds invisible delimiter cases to the `can_begin_*`/`may_be_*`
methods and the `failed_to_match_macro` that are equivalent to the
existing `Interpolated` cases.
- It adds panics/asserts in some places where invisible delimiters
should never occur.
- In `Parser::parse_struct_fields` it excludes an ident + invisible
delimiter from special consideration in an error message, because
that's quite different to an ident + paren/brace/bracket.
Unify FnKind between AST visitors and make WalkItemKind more straight forward
Unifying `FnKind` requires a bunch of changes to `WalkItemKind::walk` signature so I'll change them in one go
related to #128974
r? `@petrochenkov`
Delete the `cfg(not(parallel))` serial compiler
Since it's inception a long time ago, the parallel compiler and its cfgs have been a maintenance burden. This was a necessary evil the allow iteration while not degrading performance because of synchronization overhead.
But this time is over. Thanks to the amazing work by the parallel working group (and the dyn sync crimes), the parallel compiler has now been fast enough to be shipped by default in nightly for quite a while now.
Stable and beta have still been on the serial compiler, because they can't use `-Zthreads` anyways.
But this is quite suboptimal:
- the maintenance burden still sucks
- we're not testing the serial compiler in nightly
Because of these reasons, it's time to end it. The serial compiler has served us well in the years since it was split from the parallel one, but it's over now.
Let the knight slay one head of the two-headed dragon!
#113349
Note that the default is still 1 thread, as more than 1 thread is still fairly broken.
cc `@onur-ozkan` to see if i did the bootstrap field removal correctly, `@SparrowLii` on the sync parts
Since it's inception a long time ago, the parallel compiler and its cfgs
have been a maintenance burden. This was a necessary evil the allow
iteration while not degrading performance because of synchronization
overhead.
But this time is over. Thanks to the amazing work by the parallel
working group (and the dyn sync crimes), the parallel compiler has now
been fast enough to be shipped by default in nightly for quite a while
now.
Stable and beta have still been on the serial compiler, because they
can't use `-Zthreads` anyways.
But this is quite suboptimal:
- the maintenance burden still sucks
- we're not testing the serial compiler in nightly
Because of these reasons, it's time to end it. The serial compiler has
served us well in the years since it was split from the parallel one,
but it's over now.
Let the knight slay one head of the two-headed dragon!
Don't use `maybe_unwrap_block` when checking for macro calls in a block expr
Fixes#131915
Using `maybe_unwrap_block` to determine if we are looking at a `{ mac_call!{} }` will fail sometimes as `mac_call!{}` could be a `StmtKind::MacCall` not a `StmtKind::Expr`. This caused the def collector to think that `{ mac_call!{} }` was a non-trivial const argument and create a definition for it even though it should not.
r? `@compiler-errors` cc `@camelid`
(Big performance change) Do not run lints that cannot emit
Before this change, adding a lint was a difficult matter because it always had some overhead involved. This was because all lints would run, no matter their default level, or if the user had `#![allow]`ed them. This PR changes that. This change would improve both the Rust lint infrastructure and Clippy, but Clippy will see the most benefit, as it has about 900 registered lints (and growing!)
So yeah, with this little patch we filter all lints pre-linting, and remove any lint that is either:
- Manually `#![allow]`ed in the whole crate,
- Allowed in the command line, or
- Not manually enabled with `#[warn]` or similar, and its default level is `Allow`
As some lints **need** to run, this PR also adds **loadbearing lints**. On a lint declaration, you can use the ``@eval_always` = true` marker to label it as loadbearing. A loadbearing lint will never be filtered (it will always run)
Fixes#106983
Pass Ident by reference in ast Visitor
`MutVisitor`'s version of `visit_ident` passes around `&Ident`, but `Visitor` copies `Ident`. This PR changes that
r? `@petrochenkov`
related to #128974
Before this change, adding a lint was a difficult matter
because it always had some overhead involved. This was
because all lints would run, no matter their default level,
or if the user had #![allow]ed them. This PR changes that
Rollup of 9 pull requests
Successful merges:
- #122670 (Fix bug where `option_env!` would return `None` when env var is present but not valid Unicode)
- #131095 (Use environment variables instead of command line arguments for merged doctests)
- #131339 (Expand set_ptr_value / with_metadata_of docs)
- #131652 (Move polarity into `PolyTraitRef` rather than storing it on the side)
- #131675 (Update lint message for ABI not supported)
- #131681 (Fix up-to-date checking for run-make tests)
- #131702 (Suppress import errors for traits that couldve applied for method lookup error)
- #131703 (Resolved python deprecation warning in publish_toolstate.py)
- #131710 (Remove `'apostrophes'` from `rustc_parse_format`)
r? `@ghost`
`@rustbot` modify labels: rollup
Add `&pin (mut|const) T` type position sugar
This adds parser support for `&pin mut T` and `&pin const T` references. These are desugared to `Pin<&mut T>` and `Pin<&T>` in the AST lowering phases.
This PR currently includes #130526 since that one is in the commit queue. Only the most recent commits (bd450027eb4a94b814a7dd9c0fa29102e6361149 and following) are new.
Tracking:
- #130494
r? `@compiler-errors`
Autodiff Upstreaming - enzyme frontend
This is an upstream PR for the `autodiff` rustc_builtin_macro that is part of the autodiff feature.
For the full implementation, see: https://github.com/rust-lang/rust/pull/129175
**Content:**
It contains a new `#[autodiff(<args>)]` rustc_builtin_macro, as well as a `#[rustc_autodiff]` builtin attribute.
The autodiff macro is applied on function `f` and will expand to a second function `df` (name given by user).
It will add a dummy body to `df` to make sure it type-checks. The body will later be replaced by enzyme on llvm-ir level,
we therefore don't really care about the content. Most of the changes (700 from 1.2k) are in `compiler/rustc_builtin_macros/src/autodiff.rs`, which expand the macro. Nothing except expansion is implemented for now.
I have a fallback implementation for relevant functions in case that rustc should be build without autodiff support. The default for now will be off, although we want to flip it later (once everything landed) to on for nightly. For the sake of CI, I have flipped the defaults, I'll revert this before merging.
**Dummy function Body:**
The first line is an `inline_asm` nop to make inlining less likely (I have additional checks to prevent this in the middle end of rustc. If `f` gets inlined too early, we can't pass it to enzyme and thus can't differentiate it.
If `df` gets inlined too early, the call site will just compute this dummy code instead of the derivatives, a correctness issue. The following black_box lines make sure that none of the input arguments is getting optimized away before we replace the body.
**Motivation:**
The user facing autodiff macro can verify the user input. Then I write it as args to the rustc_attribute, so from here on I can know that these values should be sensible. A rustc_attribute also turned out to be quite nice to attach this information to the corresponding function and carry it till the backend.
This is also just an experiment, I expect to adjust the user facing autodiff macro based on user feedback, to improve usability.
As a simple example of what this will do, we can see this expansion:
From:
```
#[autodiff(df, Reverse, Duplicated, Const, Active)]
pub fn f1(x: &[f64], y: f64) -> f64 {
unimplemented!()
}
```
to
```
#[rustc_autodiff]
#[inline(never)]
pub fn f1(x: &[f64], y: f64) -> f64 {
::core::panicking::panic("not implemented")
}
#[rustc_autodiff(Reverse, Duplicated, Const, Active,)]
#[inline(never)]
pub fn df(x: &[f64], dx: &mut [f64], y: f64, dret: f64) -> f64 {
unsafe { asm!("NOP"); };
::core::hint::black_box(f1(x, y));
::core::hint::black_box((dx, dret));
::core::hint::black_box(f1(x, y))
}
```
I will add a few more tests once I figured out why rustc rebuilds every time I touch a test.
Tracking:
- https://github.com/rust-lang/rust/issues/124509
try-job: dist-x86_64-msvc
Retire the `unnamed_fields` feature for now
`#![feature(unnamed_fields)]` was implemented in part in #115131 and #115367, however work on that feature has (afaict) stalled and in the mean time there have been some concerns raised (e.g.[^1][^2]) about whether `unnamed_fields` is worthwhile to have in the language, especially in its current desugaring. Because it represents a compiler implementation burden including a new kind of anonymous ADT and additional complication to field selection, and is quite prone to bugs today, I'm choosing to remove the feature.
However, since I'm not one to really write a bunch of words, I'm specifically *not* going to de-RFC this feature. This PR essentially *rolls back* the state of this feature to "RFC accepted but not yet implemented"; however if anyone wants to formally unapprove the RFC from the t-lang side, then please be my guest. I'm just not totally willing to summarize the various language-facing reasons for why this feature is or is not worthwhile, since I'm coming from the compiler side mostly.
Fixes#117942Fixes#121161Fixes#121263Fixes#121299Fixes#121722Fixes#121799Fixes#126969Fixes#131041
Tracking:
* https://github.com/rust-lang/rust/issues/49804
[^1]: https://rust-lang.zulipchat.com/#narrow/stream/213817-t-lang/topic/Unnamed.20struct.2Funion.20fields
[^2]: https://github.com/rust-lang/rust/issues/49804#issuecomment-1972619108
- fix for divergence
- fix error message
- fix another cranelift test
- fix some cranelift things
- don't set the NORETURN option for naked asm
- fix use of naked_asm! in doc comment
- fix use of naked_asm! in run-make test
- use `span_bug` in unreachable branch
