Eliminate some `FIXME(lcnr)` comments
In some cases this involved changing code. In some cases the comment was able to removed or replaced.
r? ``@lcnr``
Rename `Generics::params` to `Generics::own_params`
I hope this makes it slightly more obvious that `generics.own_params` is insufficient when considering nested items. I didn't actually audit any of the usages, for the record.
r? lcnr
`InferCtxt::next_{ty,const}_var*` all take an origin, but the
`param_def_id` is almost always `None`. This commit changes them to just
take a `Span` and build the origin within the method, and adds new
methods for the rare cases where `param_def_id` might not be `None`.
This avoids a lot of tedious origin building.
Specifically:
- next_ty_var{,_id_in_universe,_in_universe}: now take `Span` instead of
`TypeVariableOrigin`
- next_ty_var_with_origin: added
- next_const_var{,_in_universe}: takes Span instead of ConstVariableOrigin
- next_const_var_with_origin: added
- next_region_var, next_region_var_in_universe: these are unchanged,
still take RegionVariableOrigin
The API inconsistency (ty/const vs region) seems worth it for the
large conciseness improvements.
It provides a way to effectively embed a linked list within an
`IndexVec` and also iterate over that list. It's written in a very
generic way, involving two traits `Links` and `LinkElem`. But the
`Links` trait is only impl'd for `IndexVec` and `&IndexVec`, and the
whole thing is only used in one module within `rustc_borrowck`. So I
think it's over-engineered and hard to read. Plus it has no comments.
This commit removes it, and adds a (non-generic) local iterator for the
use within `rustc_borrowck`. Much simpler.
Remove many `#[macro_use] extern crate foo` items
This requires the addition of more `use` items, which often make the code more verbose. But they also make the code easier to read, because `#[macro_use]` obscures where macros are defined.
r? `@fee1-dead`
Remove optionality from MoveData::base_local
This is an artifact from when Places could be based on statics and not just locals. Now, all move paths either are locals or have parents, so this doesn't need to return Option anymore.
```
error[E0499]: cannot borrow `foo` as mutable more than once at a time
--> $DIR/suggest-split-at-mut.rs:13:18
|
LL | let a = &mut foo[..2];
| --- first mutable borrow occurs here
LL | let b = &mut foo[2..];
| ^^^ second mutable borrow occurs here
LL | a[0] = 5;
| ---- first borrow later used here
|
= help: use `.split_at_mut(position)` or similar method to obtain two mutable non-overlapping sub-slices
```
Address most of #58792.
For follow up work, we should emit a structured suggestion for cases where we can identify the exact `let (a, b) = foo.split_at_mut(2);` call that is needed.
```
error[E0507]: cannot move out of `bar`, a captured variable in an `FnMut` closure
--> $DIR/borrowck-move-by-capture.rs:9:29
|
LL | let bar: Box<_> = Box::new(3);
| --- captured outer variable
LL | let _g = to_fn_mut(|| {
| -- captured by this `FnMut` closure
LL | let _h = to_fn_once(move || -> isize { *bar });
| ^^^^^^^^^^^^^^^^ ----
| | |
| | variable moved due to use in closure
| | move occurs because `bar` has type `Box<isize>`, which does not implement the `Copy` trait
| `bar` is moved here
|
help: clone the value before moving it into the closure
|
LL ~ let value = bar.clone();
LL ~ let _h = to_fn_once(move || -> isize { value });
|
```
```
error[E0382]: use of moved value: `t`
--> $DIR/use_of_moved_value_copy_suggestions.rs:7:9
|
LL | fn duplicate_t<T>(t: T) -> (T, T) {
| - move occurs because `t` has type `T`, which does not implement the `Copy` trait
...
LL | (t, t)
| - ^ value used here after move
| |
| value moved here
|
help: if `T` implemented `Clone`, you could clone the value
--> $DIR/use_of_moved_value_copy_suggestions.rs:4:16
|
LL | fn duplicate_t<T>(t: T) -> (T, T) {
| ^ consider constraining this type parameter with `Clone`
...
LL | (t, t)
| - you could clone this value
help: consider restricting type parameter `T`
|
LL | fn duplicate_t<T: Copy>(t: T) -> (T, T) {
| ++++++
```
The `help` is new. On ADTs, we also extend the output with span labels:
```
error[E0507]: cannot move out of static item `FOO`
--> $DIR/issue-17718-static-move.rs:6:14
|
LL | let _a = FOO;
| ^^^ move occurs because `FOO` has type `Foo`, which does not implement the `Copy` trait
|
note: if `Foo` implemented `Clone`, you could clone the value
--> $DIR/issue-17718-static-move.rs:1:1
|
LL | struct Foo;
| ^^^^^^^^^^ consider implementing `Clone` for this type
...
LL | let _a = FOO;
| --- you could clone this value
help: consider borrowing here
|
LL | let _a = &FOO;
| +
```
Start pointing to where bindings were declared when they are captured in closures:
```
error[E0597]: `x` does not live long enough
--> $DIR/suggest-return-closure.rs:23:9
|
LL | let x = String::new();
| - binding `x` declared here
...
LL | |c| {
| --- value captured here
LL | x.push(c);
| ^ borrowed value does not live long enough
...
LL | }
| -- borrow later used here
| |
| `x` dropped here while still borrowed
```
Suggest cloning in more cases involving closures:
```
error[E0507]: cannot move out of `foo` in pattern guard
--> $DIR/issue-27282-move-ref-mut-into-guard.rs:11:19
|
LL | if { (|| { let mut bar = foo; bar.take() })(); false } => {},
| ^^ --- move occurs because `foo` has type `&mut Option<&i32>`, which does not implement the `Copy` trait
| |
| `foo` is moved here
|
= note: variables bound in patterns cannot be moved from until after the end of the pattern guard
help: consider cloning the value if the performance cost is acceptable
|
LL | if { (|| { let mut bar = foo.clone(); bar.take() })(); false } => {},
| ++++++++
```
deref patterns: lower deref patterns to MIR
This lowers deref patterns to MIR. This is a bit tricky because this is the first kind of pattern that requires storing a value in a temporary. Thanks to https://github.com/rust-lang/rust/pull/123324 false edges are no longer a problem.
The thing I'm not confident about is the handling of fake borrows. This PR ignores any fake borrows inside a deref pattern. We are guaranteed to at least fake borrow the place of the first pointer value, which could be enough, but I'm not certain.
Make `suggest_deref_closure_return` more idiomatic/easier to understand
The only functional change here really is just making it not use a fresh type variable for upvars. I'll point that out in the code.
The rest of the changes are just stylistic, because reading this code was really confusing me (variable names were vague, ways of accessing types were unidiomatic, order of operations was kind of strange, etc).
This is stacked on #123989.
r? oli-obk since you approved #122213
Better graphviz output for SCCs and NLL constraints
This PR modifies the output for `-Z dump-mir-graphviz=yes`. Specifically, it changes the output of the files `.-------.nll.0.regioncx.all.dot` and `nll.0.regioncx.scc.dot` to be easier to read and contain some information that helped me during debugging. In particular:
- SCC indices are contracted to `SCC(n)` instead of `ConstraintSccIndex(n)` to compress the nodes
- SCC regions are in `{}` rather than `[]` (controversial since they are technically ordered by index, but I figured they're more sets than arrays conceptually since they're equivalence classes).
- For regions in other universes than the root, also show the region universe (as ?8/U1)
- For regions with external names, show the external name in parenthesis
- For the region graph where edges are locations, render the All variant of the enum without the file since it's extremely long and often destroys the rendering
- For region graph edge annotations for single locations, remove the wrapping around the Location variant and just add its contents since this can be unambiguously done
Example output (from the function `foo()` of `tests/ui/error-codes/E0582.rs`) for an SCC graph:
...and for the constraints:
This PR also gives `UniverseIndex`es the `is_root()` method since this is now an operation that happens three times in the borrowck crate.
Remove `TypeVariableOriginKind` and `ConstVariableOriginKind`
It's annoying to have to import `TypeVariableOriginKind` just to fill it with `MiscVariable` for almost every use. Every other usage other than `TypeParameterDefinition` wasn't even used -- I can see how it may have been useful once for debugging, but I do quite a lot of typeck debugging and I've never really needed it.
So let's just remove it, and keep around the only useful thing which is the `DefId` of the param for `var_for_def`.
This is based on #123006, which removed the special use of `TypeVariableOriginKind::OpaqueInference`, which I'm pretty sure I was the one that added.
r? lcnr or re-roll to types
