`#[diagnostic::on_unimplemented]` without filters
This commit adds support for a `#[diagnostic::on_unimplemented]` attribute with the following options:
* `message` to customize the primary error message
* `note` to add a customized note message to an error message
* `label` to customize the label part of the error message
The relevant behavior is specified in [RFC-3366](https://rust-lang.github.io/rfcs/3366-diagnostic-attribute-namespace.html)
This commit adds support for a `#[diagnostic::on_unimplemented]`
attribute with the following options:
* `message` to customize the primary error message
* `note` to add a customized note message to an error message
* `label` to customize the label part of the error message
Co-authored-by: León Orell Valerian Liehr <me@fmease.dev>
Co-authored-by: Michael Goulet <michael@errs.io>
There was an incomplete version of the check in parsing and a second
version in AST validation. This meant that some, but not all, invalid
uses were allowed inside macros/disabled cfgs. It also means that later
passes have a hard time knowing when the let expression is in a valid
location, sometimes causing ICEs.
- Add a field to ExprKind::Let in AST/HIR to mark whether it's in a
valid location.
- Suppress later errors and MIR construction for invalid let
expressions.
Parse unnamed fields and anonymous structs or unions (no-recovery)
It is part of #114782 which implements #49804. Only parse anonymous structs or unions in struct field definition positions.
r? `@petrochenkov`
Anonymous structs or unions are only allowed in struct field
definitions.
Co-authored-by: carbotaniuman <41451839+carbotaniuman@users.noreply.github.com>
Indexing is similar to method calls in having an arbitrary
left-hand-side and then something on the right, which is the main part
of the expression. Method calls already have a span for that right part,
but indexing does not. This means that long method chains that use
indexing have really bad spans, especially when the indexing panics and
that span in coverted into a panic location.
This does the same thing as method calls for the AST and HIR, storing an
extra span which is then put into the `fn_span` field in THIR.
It's the same as `Delimiter`, minus the `Invisible` variant. I'm
generally in favour of using types to make impossible states
unrepresentable, but this one feels very low-value, and the conversions
between the two types are annoying and confusing.
Look at the change in `src/tools/rustfmt/src/expr.rs` for an example:
the old code converted from `MacDelimiter` to `Delimiter` and back
again, for no good reason. This suggests the author was confused about
the types.
`TokenCursor` currently does doc comment desugaring on the fly, if the
`desugar_doc_comment` field is set. This requires also modifying the
token stream on the fly with `replace_prev_and_rewind`.
This commit moves the doc comment desugaring out of `TokenCursor`, by
introducing a new `TokenStream::desugar_doc_comment` method. This
separation of desugaring and iterating makes the code nicer.
Optimize `TokenKind::clone`.
`TokenKind` would impl `Copy` if it weren't for
`TokenKind::Interpolated`. This commit makes `clone` reflect that.
r? `@ghost`
Less `TokenTree` cloning
`TokenTreeCursor` has this comment on it:
```
// FIXME: Many uses of this can be replaced with by-reference iterator to avoid clones.
```
This PR completes that FIXME. It doesn't have much perf effect, but at least we now know that.
r? `@petrochenkov`
This is surprising, but the new comment explains why. It's a logical
conclusion in the drive to avoid `TokenTree` clones.
`TokenTreeCursor` is now only used within `Parser`. It's still needed
due to `replace_prev_and_rewind`.
Tweak spans for self arg, fix borrow suggestion for signature mismatch
1. Adjust a suggestion message that was annoying me
2. Fix#112503 by recording the right spans for the `self` part of the `&self` 0th argument
3. Remove the suggestion for adjusting a trait signature on type mismatch, bc that's gonna probably break all the other impls of the trait even if it fixes its one usage 😅
`#[cfg]`s are frequently used to gate crate content behind cargo
features. This can lead to very confusing errors when features are
missing. For example, `serde` doesn't have the `derive` feature by
default. Therefore, `serde::Serialize` fails to resolve with a generic
error, even though the macro is present in the docs.
This commit adds a list of all stripped item names to metadata. This is
filled during macro expansion and then, through a fed query, persisted
in metadata. The downstream resolver can then access the metadata to
look at possible candidates for mentioning in the errors.
This slightly increases metadata (800k->809k for the feature-heavy
windows crate), but not enough to really matter.
Support #[global_allocator] without the allocator shim
This makes it possible to use liballoc/libstd in combination with `--emit obj` if you use `#[global_allocator]`. This is what rust-for-linux uses right now and systemd may use in the future. Currently they have to depend on the exact implementation of the allocator shim to create one themself as `--emit obj` doesn't create an allocator shim.
Note that currently the allocator shim also defines the oom error handler, which is normally required too. Once `#![feature(default_alloc_error_handler)]` becomes the only option, this can be avoided. In addition when using only fallible allocator methods and either `--cfg no_global_oom_handling` for liballoc (like rust-for-linux) or `--gc-sections` no references to the oom error handler will exist.
To avoid this feature being insta-stable, you will have to define `__rust_no_alloc_shim_is_unstable` to avoid linker errors.
(Labeling this with both T-compiler and T-lang as it originally involved both an implementation detail and had an insta-stable user facing change. As noted above, the `__rust_no_alloc_shim_is_unstable` symbol requirement should prevent unintended dependence on this unstable feature.)
Introduce `DynSend` and `DynSync` auto trait for parallel compiler
part of parallel-rustc #101566
This PR introduces `DynSend / DynSync` trait and `FromDyn / IntoDyn` structure in rustc_data_structure::marker. `FromDyn` can dynamically check data structures for thread safety when switching to parallel environments (such as calling `par_for_each_in`). This happens only when `-Z threads > 1` so it doesn't affect single-threaded mode's compile efficiency.
r? `@cjgillot`
You will need to add the following as replacement for the old __rust_*
definitions when not using the alloc shim.
#[no_mangle]
static __rust_no_alloc_shim_is_unstable: u8 = 0;
This makes it possible to use liballoc/libstd in combination with
`--emit obj` if you use `#[global_allocator]`. Making it work for the
default libstd allocator would require weak functions, which are not
well supported on all systems.
Various changes to name resolution of anon consts
Sorry this PR is kind of all over the place ^^'
Fixes#111012
- Rewrites anon const nameres to all go through `fn resolve_anon_const` explicitly instead of `visit_anon_const` to ensure that we do not accidentally resolve anon consts as if they are allowed to use generics when they aren't. Also means that we dont have bits of code for resolving anon consts that will get out of sync (i.e. legacy const generics and resolving path consts that were parsed as type arguments)
- Renames two of the `LifetimeRibKind`, `AnonConst -> ConcreteAnonConst` and `ConstGeneric -> ConstParamTy`
- Noticed while doing this that under `generic_const_exprs` all lifetimes currently get resolved to errors without any error being emitted which was causing a bunch of tests to pass without their bugs having been fixed, incidentally fixed that in this PR and marked those tests as `// known-bug:`. I'm fine to break those since `generic_const_exprs` is a very unstable incomplete feature and this PR _does_ make generic_const_exprs "less broken" as a whole, also I can't be assed to figure out what the underlying causes of all of them are. This PR reopens#77357#83993
- Changed `generics_of` to stop providing generics and predicates to enum variant discriminant anon consts since those are not allowed to use generic parameters
- Updated the error for non 'static lifetime in const arguments and the error for non 'static lifetime in const param tys to use `derive(Diagnostic)`
I have a vague idea why const-arg-in-const-arg.rs, in-closure.rs and simple.rs have started failing which is unfortunate since these were deliberately made to work, I think lifetime resolution being broken just means this regressed at some point and nobody noticed because the tests were not testing anything :( I'm fine breaking these too for the same reason as the tests for #77357#83993. I couldn't get `// known-bug` to work for these ICEs and just kept getting different stderr between CI and local `--bless` so I just removed them and will create an issue to track re-adding (and fixing) the bugs if this PR lands.
r? `@cjgillot` cc `@compiler-errors`
My type ascription
Oh rip it out
Ah
If you think we live too much then
You can sacrifice diagnostics
Don't mix your garbage
Into my syntax
So many weird hacks keep diagnostics alive
Yet I don't even step outside
So many bad diagnostics keep tyasc alive
Yet tyasc doesn't even bother to survive!
Tweak await span to not contain dot
Fixes a discrepancy between method calls and await expressions where the latter are desugared to have a span that *contains* the dot (i.e. `.await`) but method call identifiers don't contain the dot. This leads to weird suggestions suggestions in borrowck -- see linked issue.
Fixes#110761
This mostly touches a bunch of tests to tighten their `await` span.
Migrate trivially translatable `rustc_parse` diagnostics
cc #100717
Migrate diagnostics in `rustc_parse` which are emitted in a single statement. I worked on this by expanding the lint introduced in #108760, although that isn't included here as there is much more work to be done to satisfy it
Move the WorkerLocal type from the rustc-rayon fork into rustc_data_structures
This PR moves the definition of the `WorkerLocal` type from `rustc-rayon` into `rustc_data_structures`. This is enabled by the introduction of the `Registry` type which allows you to group up threads to be used by `WorkerLocal` which is basically just an array with an per thread index. The `Registry` type mirrors the one in Rayon and each Rayon worker thread is also registered with the new `Registry`. Safety for `WorkerLocal` is ensured by having it keep a reference to the registry and checking on each access that we're still on the group of threads associated with the registry used to construct it.
Accessing a `WorkerLocal` is micro-optimized due to it being hot since it's used for most arena allocations.
Performance is slightly improved for the parallel compiler:
<table><tr><td rowspan="2">Benchmark</td><td colspan="1"><b>Before</b></th><td colspan="2"><b>After</b></th></tr><tr><td align="right">Time</td><td align="right">Time</td><td align="right">%</th></tr><tr><td>🟣 <b>clap</b>:check</td><td align="right">1.9992s</td><td align="right">1.9949s</td><td align="right"> -0.21%</td></tr><tr><td>🟣 <b>hyper</b>:check</td><td align="right">0.2977s</td><td align="right">0.2970s</td><td align="right"> -0.22%</td></tr><tr><td>🟣 <b>regex</b>:check</td><td align="right">1.1335s</td><td align="right">1.1315s</td><td align="right"> -0.18%</td></tr><tr><td>🟣 <b>syn</b>:check</td><td align="right">1.8235s</td><td align="right">1.8171s</td><td align="right"> -0.35%</td></tr><tr><td>🟣 <b>syntex_syntax</b>:check</td><td align="right">6.9047s</td><td align="right">6.8930s</td><td align="right"> -0.17%</td></tr><tr><td>Total</td><td align="right">12.1586s</td><td align="right">12.1336s</td><td align="right"> -0.21%</td></tr><tr><td>Summary</td><td align="right">1.0000s</td><td align="right">0.9977s</td><td align="right"> -0.23%</td></tr></table>
cc `@SparrowLii`
Various minor Idx-related tweaks
Nothing particularly exciting here, but a couple of things I noticed as I was looking for more index conversions to simplify.
cc https://github.com/rust-lang/compiler-team/issues/606
r? `@WaffleLapkin`
Remove `..` from return type notation
`@nikomatsakis` and I decided that using `..` in the return-type notation syntax is probably overkill.
r? `@eholk` since you reviewed the last one
Since this is piggybacking now totally off of a pre-existing syntax (parenthesized generics), let me know if you need any explanation of the logic here, since it's a bit more complicated now.
Initial support for return type notation (RTN)
See: https://smallcultfollowing.com/babysteps/blog/2023/02/13/return-type-notation-send-bounds-part-2/
1. Only supports `T: Trait<method(): Send>` style bounds, not `<T as Trait>::method(): Send`. Checking validity and injecting an implicit binder for all of the late-bound method generics is harder to do for the latter.
* I'd add this in a follow-up.
3. ~Doesn't support RTN in general type position, i.e. no `let x: <T as Trait>::method() = ...`~
* I don't think we actually want this.
5. Doesn't add syntax for "eliding" the function args -- i.e. for now, we write `method(): Send` instead of `method(..): Send`.
* May be a hazard if we try to add it in the future. I'll probably add it in a follow-up later, with a structured suggestion to change `method()` to `method(..)` once we add it.
7. ~I'm not in love with the feature gate name 😺~
* I renamed it to `return_type_notation` ✔️
Follow-up PRs will probably add support for `where T::method(): Send` bounds. I'm not sure if we ever want to support return-type-notation in arbitrary type positions. I may also make the bounds require `..` in the args list later.
r? `@ghost`
Remove the `NodeId` of `ast::ExprKind::Async`
This is a followup to https://github.com/rust-lang/rust/pull/104833#pullrequestreview-1314537416.
In my original attempt, I was using `LoweringContext::expr`, which was not correct as it creates a fresh `DefId`.
It now uses the correct `DefId` for the wrapping `Expr`, and also makes forwarding `#[track_caller]` attributes more explicit.
Remove box expressions from HIR
After #108516, `#[rustc_box]` is used at HIR->THIR lowering and this is no longer emitted, so it can be removed.
This is based on top of #108471 to help with conflicts, so 43490488ccacd1a822e9c621f5ed6fca99959a0b is the only relevant commit (sorry for all the duplicated pings!)
````@rustbot```` label +S-blocked
After removing the `map_in_place` method, which isn't much use because
modifying every element in a collection such as a `Vec` can be done
trivially with iteration.
ast: Optimize list and value extraction primitives for attributes
It's not necessary to convert the whole attribute into a meta item to extract something specific.
Sometimes the parser needs to desugar a doc comment into `#[doc =
r"foo"]`. Currently it does this in a hacky way: by pushing a "fake" new
frame (one without a delimiter) onto the `TokenCursor` stack.
This commit changes things so that the token stream itself is modified
in place. The nice thing about this is that it means
`TokenCursorFrame::delim_sp` is now only `None` for the outermost frame.
Revert "review comment: Remove AST AnonTy"
This reverts commit 020cca8d36.
Revert "Ensure macros are not affected"
This reverts commit 12d18e4031.
Revert "Emit fewer errors on patterns with possible type ascription"
This reverts commit c847a01a3b.
Revert "Teach parser to understand fake anonymous enum syntax"
This reverts commit 2d82420665.
Move format_args!() into AST (and expand it during AST lowering)
Implements https://github.com/rust-lang/compiler-team/issues/541
This moves FormatArgs from rustc_builtin_macros to rustc_ast_lowering. For now, the end result is the same. But this allows for future changes to do smarter things with format_args!(). It also allows Clippy to directly access the ast::FormatArgs, making things a lot easier.
This change turns the format args types into lang items. The builtin macro used to refer to them by their path. After this change, the path is no longer relevant, making it easier to make changes in `core`.
This updates clippy to use the new language items, but this doesn't yet make clippy use the ast::FormatArgs structure that's now available. That should be done after this is merged.
Teach parser to understand fake anonymous enum syntax
Parse `Ty | OtherTy` in function argument and return types.
Parse type ascription in top level patterns.
Minimally address #100741.
Convert all the crates that have had their diagnostic migration
completed (except save_analysis because that will be deleted soon and
apfloat because of the licensing problem).
Document some of the AST nodes
Someone was confused about some of this on Zulip, added some docs
We probably should make sure every last field/variant in the AST/HIR is documented at some point
`@bors` rollup
Remove the `..` from the body, only a few invocations used it and it's
inconsistent with rust syntax.
Use `;` instead of `,` between consts. As the Rust syntax gods inteded.
This removes the `custom` format functionality as its only user was
trivially migrated to using a normal format.
If a new use case for a custom formatting impl pops up, you can add it
back.
Remove `token::Lit` from `ast::MetaItemLit`.
Currently `ast::MetaItemLit` represents the literal kind twice. This PR removes that redundancy. Best reviewed one commit at a time.
r? `@petrochenkov`
It has a single call site in the HIR pretty printer, where the resulting
token lit is immediately converted to a string.
This commit replaces `LitKind::synthesize_token_lit` with a `Display`
impl for `LitKind`, which can be used by the HIR pretty printer.
There are better ways to create the meta items.
- In the rustdoc tests, the commit adds `dummy_meta_item_name_value`,
which matches the existing `dummy_meta_item_word` function and
`dummy_meta_item_list` macro.
- In `types.rs` the commit clones the existing meta item and then
modifies the clone.
Remove useless borrows and derefs
They are nothing more than noise.
<sub>These are not all of them, but my clippy started crashing (stack overflow), so rip :(</sub>
`token::Lit` contains a `kind` field that indicates what kind of literal
it is. `ast::MetaItemLit` currently wraps a `token::Lit` but also has
its own `kind` field. This means that `ast::MetaItemLit` encodes the
literal kind in two different ways.
This commit changes `ast::MetaItemLit` so it no longer wraps
`token::Lit`. It now contains the `symbol` and `suffix` fields from
`token::Lit`, but not the `kind` field, eliminating the redundancy.
This is required to distinguish between cooked and raw byte string
literals in an `ast::LitKind`, without referring to an adjacent
`token::Lit`. It's a prerequisite for the next commit.
Lower them into a single item with multiple resolutions instead.
This also allows to remove additional `NodId`s and `DefId`s related to those additional items.
There is code for converting `Attribute` (syntactic) to `MetaItem`
(semantic). There is also code for the reverse direction. The reverse
direction isn't really necessary; it's currently only used when
generating attributes, e.g. in `derive` code.
This commit adds some new functions for creating `Attributes`s directly,
without involving `MetaItem`s: `mk_attr_word`, `mk_attr_name_value_str`,
`mk_attr_nested_word`, and
`ExtCtxt::attr_{word,name_value_str,nested_word}`.
These new methods replace the old functions for creating `Attribute`s:
`mk_attr_inner`, `mk_attr_outer`, and `ExtCtxt::attribute`. Those
functions took `MetaItem`s as input, and relied on many other functions
that created `MetaItems`, which are also removed: `mk_name_value_item`,
`mk_list_item`, `mk_word_item`, `mk_nested_word_item`,
`{MetaItem,MetaItemKind,NestedMetaItem}::token_trees`,
`MetaItemKind::attr_args`, `MetaItemLit::{from_lit_kind,to_token}`,
`ExtCtxt::meta_word`.
Overall this cuts more than 100 lines of code and makes thing simpler.
`Lit::from_included_bytes` calls `Lit::from_lit_kind`, but the two call
sites only need the resulting `token::Lit`, not the full `ast::Lit`.
This commit changes those call sites to use `LitKind::to_token_lit`,
which means `from_included_bytes` can be removed.
`MacArgs` is an enum with three variants: `Empty`, `Delimited`, and `Eq`. It's
used in two ways:
- For representing attribute macro arguments (e.g. in `AttrItem`), where all
three variants are used.
- For representing function-like macros (e.g. in `MacCall` and `MacroDef`),
where only the `Delimited` variant is used.
In other words, `MacArgs` is used in two quite different places due to them
having partial overlap. I find this makes the code hard to read. It also leads
to various unreachable code paths, and allows invalid values (such as
accidentally using `MacArgs::Empty` in a `MacCall`).
This commit splits `MacArgs` in two:
- `DelimArgs` is a new struct just for the "delimited arguments" case. It is
now used in `MacCall` and `MacroDef`.
- `AttrArgs` is a renaming of the old `MacArgs` enum for the attribute macro
case. Its `Delimited` variant now contains a `DelimArgs`.
Various other related things are renamed as well.
These changes make the code clearer, avoids several unreachable paths, and
disallows the invalid values.
Instead of `ast::Lit`.
Literal lowering now happens at two different times. Expression literals
are lowered when HIR is crated. Attribute literals are lowered during
parsing.
This commit changes the language very slightly. Some programs that used
to not compile now will compile. This is because some invalid literals
that are removed by `cfg` or attribute macros will no longer trigger
errors. See this comment for more details:
https://github.com/rust-lang/rust/pull/102944#issuecomment-1277476773
Recover wrong-cased keywords that start items
(_this pr was inspired by [this tweet](https://twitter.com/Azumanga/status/1552982326409367561)_)
r? `@estebank`
We've talked a bit about this recovery, but I just wanted to make sure that this is the right approach :)
For now I've only added the case insensitive recovery to `use`s, since most other items like `impl` blocks, modules, functions can start with multiple keywords which complicates the matter.
PR #98758 introduced code to avoid redundant assertions in derived code
like this:
```
let _: ::core::clone::AssertParamIsClone<u32>;
let _: ::core::clone::AssertParamIsClone<u32>;
```
But the predicate `is_simple_path` introduced as part of this failed to
account for generic arguments. Therefore the deriving code erroneously
considers types like `Option<bool>` and `Option<f32>` to be the same.
This commit fixes `is_simple_path`.
Fixes#103157.
Remove `TokenStreamBuilder`
`TokenStreamBuilder` is used to combine multiple token streams. It can be removed, leaving the code a little simpler and a little faster.
r? `@Aaron1011`
`TokenStreamBuilder` exists to concatenate multiple `TokenStream`s
together. This commit removes it, and moves the concatenation
functionality directly into `TokenStream`, via two new methods
`push_tree` and `push_stream`. This makes things both simpler and
faster.
`push_tree` is particularly important. `TokenStreamBuilder` only had a
single `push` method, which pushed a stream. But in practice most of the
time we push a single token tree rather than a stream, and `push_tree`
avoids the need to build a token stream with a single entry (which
requires two allocations, one for the `Lrc` and one for the `Vec`).
The main `push_tree` use arises from a change to one of the `ToInternal`
impls in `proc_macro_server.rs`. It now returns a `SmallVec` instead of
a `TokenStream`. This return value is then iterated over by
`concat_trees`, which does `push_tree` on each element. Furthermore, the
use of `SmallVec` avoids more allocations, because there is always only
one or two token trees.
Note: the removed `TokenStreamBuilder::push` method had some code to
deal with a quadratic blowup case from #57735. This commit removes the
code. I tried and failed to reproduce the blowup from that PR, before
and after this change. Various other changes have happened to
`TokenStreamBuilder` in the meantime, so I suspect the original problem
is no longer relevant, though I don't have proof of this. Generally
speaking, repeatedly extending a `Vec` without pre-determining its
capacity is *not* quadratic. It's also incredibly common, within rustc
and many other Rust programs, so if there were performance problems
there you'd think it would show up in other places, too.
Group together more size assertions.
Also add a few more assertions for some relevant token-related types.
And fix an erroneous comment in `rustc_errors`.
r? `@lqd`
On later stages, the feature is already stable.
Result of running:
rg -l "feature.let_else" compiler/ src/librustdoc/ library/ | xargs sed -s -i "s#\\[feature.let_else#\\[cfg_attr\\(bootstrap, feature\\(let_else\\)#"
make `mk_attr_id` part of `ParseSess`
Updates #48685
The current `mk_attr_id` uses the `AtomicU32` type, which is not very efficient and adds a lot of lock contention in a parallel environment.
This PR refers to the task list in #48685, uses `mk_attr_id` as a method of the `AttrIdGenerator` struct, and adds a new field `attr_id_generator` to `ParseSess`.
`AttrIdGenerator` uses the `WorkerLocal`, which has two advantages: 1. `Cell` is more efficient than `AtomicU32`, and does not increase any lock contention. 2. We put the index of the work thread in the first few bits of the generated `AttrId`, so that the `AttrId` generated in different threads can be easily guaranteed to be unique.
cc `@cjgillot`
Initial implementation of dyn*
This PR adds extremely basic and incomplete support for [dyn*](https://smallcultfollowing.com/babysteps//blog/2022/03/29/dyn-can-we-make-dyn-sized/). The goal is to get something in tree behind a flag to make collaboration easier, and also to make sure the implementation so far is not unreasonable. This PR does quite a few things:
* Introduce `dyn_star` feature flag
* Adds parsing for `dyn* Trait` types
* Defines `dyn* Trait` as a sized type
* Adds support for explicit casts, like `42usize as dyn* Debug`
* Including const evaluation of such casts
* Adds codegen for drop glue so things are cleaned up properly when a `dyn* Trait` object goes out of scope
* Adds codegen for method calls, at least for methods that take `&self`
Quite a bit is still missing, but this gives us a starting point. Note that this is never intended to become stable surface syntax for Rust, but rather `dyn*` is planned to be used as an implementation detail for async functions in dyn traits.
Joint work with `@nikomatsakis` and `@compiler-errors.`
r? `@bjorn3`
The primary purpose of this commit is to introduce the
dyn_star flag so we can begin experimenting with implementation.
In order to have something to do in the feature gate test, we also add
parser support for `dyn* Trait` objects. These are currently treated
just like `dyn Trait` objects, but this will change in the future.
Note that for now `dyn* Trait` is experimental syntax to enable
implementing some of the machinery needed for async fn in dyn traits
without fully supporting the feature.
The `visit_path_segment` method of both the AST and HIR visitors has a
`path_span` argument that isn't necessary. This commit removes it.
There are two very small and inconsequential functional changes.
- One call to `NodeCollector::insert` now is passed a path segment
identifier span instead of a full path span. This span is only used in
a panic message printed in the case of an internal compiler bug.
- Likewise, one call to `LifetimeCollectVisitor::record_elided_anchor`
now uses a path segment identifier span instead of a full path span.
This span is used to make some `'_` lifetimes.
`To` is better than `Create` for indicating that this is a non-consuming
conversion, rather than creating something out of nothing.
And the addition of `Attr` is because the current names makes them sound
like they relate to `TokenStream`, but really they relate to
`AttrTokenStream`.
These two type names are long and have long matching prefixes. I find
them hard to read, especially in combinations like
`AttrAnnotatedTokenStream::new(vec![AttrAnnotatedTokenTree::Token(..)])`.
This commit renames them as `AttrToken{Stream,Tree}`.
Suggest removing unnecessary prefix let in patterns
Helps with #101291, though I think `@estebank` probably wants this:
> Finally, I think it'd be nice if we could detect that we don't know for sure and "just" swallow the rest of the expression (find the next ; accounting for nested braces) or the end of the item (easier).
... to be implemented before we close that issue out completely.
`BindingAnnotation` refactor
* `ast::BindingMode` is deleted and replaced with `hir::BindingAnnotation` (which is moved to `ast`)
* `BindingAnnotation` is changed from an enum to a tuple struct e.g. `BindingAnnotation(ByRef::No, Mutability::Mut)`
* Associated constants added for convenience `BindingAnnotation::{NONE, REF, MUT, REF_MUT}`
One goal is to make it more clear that `BindingAnnotation` merely represents syntax `ref mut` and not the actual binding mode. This was especially confusing since we had `ast::BindingMode`->`hir::BindingAnnotation`->`thir::BindingMode`.
I wish there were more symmetry between `ByRef` and `Mutability` (variant) naming (maybe `Mutable::Yes`?), and I also don't love how long the name `BindingAnnotation` is, but this seems like the best compromise. Ideas welcome.
