Because:
- `diagnostic_builder.rs` is small (282 lines),
- `Diagnostic` and `DiagnosticBuilder` are closely related types, and
- there's already an `impl DiagnosticBuilder` block in `diagnostic.rs`.
At the same time, reorder a few of things already in `diagnostic.rs`,
e.g. move `struct Diagnostic` just before `impl Diagnostic`.
This commit only moves code around. There are no functional changes.
Overhaul `Diagnostic` and `DiagnosticBuilder`
Implements the first part of https://github.com/rust-lang/compiler-team/issues/722, which moves functionality and use away from `Diagnostic`, onto `DiagnosticBuilder`.
Likely follow-ups:
- Move things around, because this PR was written to minimize diff size, so some things end up in sub-optimal places. E.g. `DiagnosticBuilder` has impls in both `diagnostic.rs` and `diagnostic_builder.rs`.
- Rename `Diagnostic` as `DiagInner` and `DiagnosticBuilder` as `Diag`.
r? `@davidtwco`
Merge `CompilerError::CompilationFailed` and `CompilerError::ICE`.
`CompilerError` has `CompilationFailed` and `ICE` variants, which seems reasonable at first. But the way it identifies them is flawed:
- If compilation errors out, i.e. `RunCompiler::run` returns an `Err`, it uses `CompilationFailed`, which is reasonable.
- If compilation panics with `FatalError`, it catches the panic and uses `ICE`. This is sometimes right, because ICEs do cause `FatalError` panics, but sometimes wrong, because certain compiler errors also cause `FatalError` panics. (The compiler/rustdoc/clippy/whatever just catches the `FatalError` with `catch_with_exit_code` in `main`.)
In other words, certain non-ICE compilation failures get miscategorized as ICEs. It's not possible to reliably distinguish the two cases, so this commit merges them. It also renames the combined variant as just `Failed`, to better match the existing `Interrupted` and `Skipped` variants.
Here is an example of a non-ICE failure that causes a `FatalError` panic, from `tests/ui/recursion_limit/issue-105700.rs`:
```
#![recursion_limit="4"]
#![invalid_attribute]
#![invalid_attribute]
#![invalid_attribute]
#![invalid_attribute]
#![invalid_attribute]
//~^ERROR recursion limit reached while expanding
fn main() {{}}
```
r? ``@spastorino``
Currently many diagnostic modifier methods are available on both
`Diagnostic` and `DiagnosticBuilder`. This commit removes most of them
from `Diagnostic`. To minimize the diff size, it keeps them within
`diagnostic.rs` but changes the surrounding `impl Diagnostic` block to
`impl DiagnosticBuilder`. (I intend to move things around later, to give
a more sensible code layout.)
`Diagnostic` keeps a few methods that it still needs, like `sub`,
`arg`, and `replace_args`.
The `forward!` macro, which defined two additional methods per call
(e.g. `note` and `with_note`), is replaced by the `with_fn!` macro,
which defines one additional method per call (e.g. `with_note`). It's
now also only used when necessary -- not all modifier methods currently
need a `with_*` form. (New ones can be easily added as necessary.)
All this also requires changing `trait AddToDiagnostic` so its methods
take `DiagnosticBuilder` instead of `Diagnostic`, which leads to many
mechanical changes. `SubdiagnosticMessageOp` gains a type parameter `G`.
There are three subdiagnostics -- `DelayedAtWithoutNewline`,
`DelayedAtWithNewline`, and `InvalidFlushedDelayedDiagnosticLevel` --
that are created within the diagnostics machinery and appended to
external diagnostics. These are handled at the `Diagnostic` level, which
means it's now hard to construct them via `derive(Diagnostic)`, so
instead we construct them by hand. This has no effect on what they look
like when printed.
There are lots of new `allow` markers for `untranslatable_diagnostics`
and `diagnostics_outside_of_impl`. This is because
`#[rustc_lint_diagnostics]` annotations were present on the `Diagnostic`
modifier methods, but missing from the `DiagnosticBuilder` modifier
methods. They're now present.
errors: only eagerly translate subdiagnostics
Subdiagnostics don't need to be lazily translated, they can always be eagerly translated. Eager translation is slightly more complex as we need to have a `DiagCtxt` available to perform the translation, which involves slightly more threading of that context.
This slight increase in complexity should enable later simplifications - like passing `DiagCtxt` into `AddToDiagnostic` and moving Fluent messages into the diagnostic structs rather than having them in separate files (working on that was what led to this change).
r? ```@nnethercote```
`CompilerError` has `CompilationFailed` and `ICE` variants, which seems
reasonable at first. But the way it identifies them is flawed:
- If compilation errors out, i.e. `RunCompiler::run` returns an `Err`,
it uses `CompilationFailed`, which is reasonable.
- If compilation panics with `FatalError`, it catches the panic and uses
`ICE`. This is sometimes right, because ICEs do cause `FatalError`
panics, but sometimes wrong, because certain compiler errors also
cause `FatalError` panics. (The compiler/rustdoc/clippy/whatever just
catches the `FatalError` with `catch_with_exit_code` in `main`.)
In other words, certain non-ICE compilation failures get miscategorized
as ICEs. It's not possible to reliably distinguish the two cases, so
this commit merges them. It also renames the combined variant as just
`Failed`, to better match the existing `Interrupted` and `Skipped`
variants.
Here is an example of a non-ICE failure that causes a `FatalError`
panic, from `tests/ui/recursion_limit/issue-105700.rs`:
```
#![recursion_limit="4"]
#![invalid_attribute]
#![invalid_attribute]
#![invalid_attribute]
#![invalid_attribute]
#![invalid_attribute]
//~^ERROR recursion limit reached while expanding
fn main() {{}}
```
Subdiagnostics don't need to be lazily translated, they can always be
eagerly translated. Eager translation is slightly more complex as we need
to have a `DiagCtxt` available to perform the translation, which involves
slightly more threading of that context.
This slight increase in complexity should enable later simplifications -
like passing `DiagCtxt` into `AddToDiagnostic` and moving Fluent messages
into the diagnostic structs rather than having them in separate files
(working on that was what led to this change).
Signed-off-by: David Wood <david@davidtw.co>
In #119972 the code should have become `E0123` rather than `0123`. This
fix doesn't affect the outcome because the proc macro errors out before
the type of the code is checked, but the fix makes the test's code
consistent with other similar code elsewhere.
Error codes are integers, but `String` is used everywhere to represent
them. Gross!
This commit introduces `ErrCode`, an integral newtype for error codes,
replacing `String`. It also introduces a constant for every error code,
e.g. `E0123`, and removes the `error_code!` macro. The constants are
imported wherever used with `use rustc_errors::codes::*`.
With the old code, we have three different ways to specify an error code
at a use point:
```
error_code!(E0123) // macro call
struct_span_code_err!(dcx, span, E0123, "msg"); // bare ident arg to macro call
\#[diag(name, code = "E0123")] // string
struct Diag;
```
With the new code, they all use the `E0123` constant.
```
E0123 // constant
struct_span_code_err!(dcx, span, E0123, "msg"); // constant
\#[diag(name, code = E0123)] // constant
struct Diag;
```
The commit also changes the structure of the error code definitions:
- `rustc_error_codes` now just defines a higher-order macro listing the
used error codes and nothing else.
- Because that's now the only thing in the `rustc_error_codes` crate, I
moved it into the `lib.rs` file and removed the `error_codes.rs` file.
- `rustc_errors` uses that macro to define everything, e.g. the error
code constants and the `DIAGNOSTIC_TABLES`. This is in its new
`codes.rs` file.
The internal function was unsound, it could cause UB in rare cases where
the user inadvertly stored the returned object in a location that could
outlive the TyCtxt.
In order to make it safe, we now take a type context as an argument to
the internal fn, and we ensure that interned items are lifted using the
provided context.
Thus, this change ensures that the compiler can properly enforce
that the object does not outlive the type context it was lifted to.
I added `tcx` argument to `internal` to force 'tcx to be the same
lifetime as TyCtxt. The only other solution I could think is to change
this function to be `unsafe`.
Simplify the `run` macro to avoid sometimes unnecessary dependency
on `TyCtxt`. Instead, users can use the new internal method `tcx()`.
Additionally, extend the macro to accept closures that may capture
variables.
These are non-backward compatible changes, but they only affect
internal APIs which are provided today as helper functions until we
have a stable API to start the compiler.
Sandwich MIR optimizations between DSE.
This PR reorders MIR optimization passes in an attempt to increase their efficiency.
- Stop running CopyProp before GVN, it's useless as GVN will do the same thing anyway. Instead, we perform CopyProp at the end of the pipeline, to ensure we do not emit copy/move chains.
- Run DSE before GVN, as it increases the probability to have single-assignment locals.
- Run DSE after the final CopyProp to turn copies into moves.
r? `@ghost`
Remove ignore-stage1 that was added when changing error count msg
The bootstrap bump has happened, so the bootstrap compiler now contains the new diagnostic.
this was added in #118138
Avoid specialization in the metadata serialization code
With the exception of a perf-only specialization for byte slices and byte vectors.
This uses the same trick of introducing a new trait and having the Encodable and Decodable derives add a bound to it as used for TyEncoder/TyDecoder. The new code is clearer about which encoder/decoder uses which impl and it reduces the dependency of rustc on specialization, making it easier to remove support for specialization entirely or turn it into a construct that is only allowed for perf optimizations if we decide to do this.
`Diagnostic` has 40 methods that return `&mut Self` and could be
considered setters. Four of them have a `set_` prefix. This doesn't seem
necessary for a type that implements the builder pattern. This commit
removes the `set_` prefixes on those four methods.
And make all hand-written `IntoDiagnostic` impls generic, by using
`DiagnosticBuilder::new(dcx, level, ...)` instead of e.g.
`dcx.struct_err(...)`.
This means the `create_*` functions are the source of the error level.
This change will let us remove `struct_diagnostic`.
Note: `#[rustc_lint_diagnostics]` is added to `DiagnosticBuilder::new`,
it's necessary to pass diagnostics tests now that it's used in
`into_diagnostic` functions.
This change introduces a new module to StableMIR named `abi` with
information from `rustc_target::abi` and `rustc_abi`, that allow users
to retrieve more low level information required to perform
bit-precise analysis.
The layout of a type can be retrieved via `Ty::layout`, and the instance
ABI can be retrieved via `Instance::fn_abi()`.
To properly handle errors while retrieve layout information, we had
to implement a few layout related traits.
- Remove `fn_sig()` from Instance.
- Change return value of `AssertMessage::description` to `Cow<>`.
- Add assert to instance `ty()`.
- Generalize uint / int type creation.
detects redundant imports that can be eliminated.
for #117772 :
In order to facilitate review and modification, split the checking code and
removing redundant imports code into two PR.
Add instance evaluation and methods to read an allocation in StableMIR
The instance evaluation is needed to handle intrinsics such as `type_id` and `type_name`.
Since we now use Allocation to represent all evaluated constants, provide a few methods to help process the data inside an allocation.
I've also started to add a structured way to get information about the compilation target machine. For now, I've only added information needed to process an allocation.
r? ``````@ouz-a``````
