Check `x86_64` size assertions on `aarch64`, too
(Context: https://rust-lang.zulipchat.com/#narrow/stream/131828-t-compiler/topic/Checking.20size.20assertions.20on.20aarch64.3F)
Currently the compiler has around 30 sets of `static_assert_size!` for various size-critical data structures (e.g. various IR nodes), guarded by `#[cfg(all(target_arch = "x86_64", target_pointer_width = "64"))]`.
(Presumably this cfg avoids having to maintain separate size values for 32-bit targets and unusual 64-bit targets. Apparently it may have been necessary before the i128/u128 alignment changes, too.)
This is slightly incovenient for people on aarch64 workstations (e.g. Macs), because the assertions normally aren't checked until we push to a PR. So this PR adds `aarch64` to the `#[cfg(..)]` guarding all of those assertions in the compiler.
---
Implemented with a simple find/replace. Verified by manually inspecting each `static_assert_size!` in `compiler/`, and checking that either the replacement succeeded, or adding aarch64 wouldn't have been appropriate.
Match ergonomics 2024: implement mutable by-reference bindings
Implements the mutable by-reference bindings portion of match ergonomics 2024 (#123076), with the `mut ref`/`mut ref mut` syntax, under feature gate `mut_ref`.
r? `@Nadrieril`
`@rustbot` label A-patterns A-edition-2024
Suggest associated type bounds on problematic associated equality bounds
Fixes#105056. TL;DR: Suggest `Trait<Ty: Bound>` on `Trait<Ty = Bound>` in Rust >=2021.
~~Blocked on #122055 (stabilization of `associated_type_bounds`), I'd say.~~ (merged)
For the `MiddleDot` case, current behaviour:
- For a case like `1.2`, `sym1` is `1` and `sym2` is `2`, and `self.token`
holds `1.2`.
- It creates a new ident token from `sym1` that it puts into `self.token`.
- Then it does `bump_with` with a new dot token, which moves the `sym1`
token into `prev_token`.
- Then it does `bump_with` with a new ident token from `sym2`, which moves the
`dot` token into `prev_token` and discards the `sym1` token.
- Then it does `bump`, which puts whatever is next into `self.token`,
moves the `sym2` token into `prev_token`, and discards the `dot` token
altogether.
New behaviour:
- Skips creating and inserting the `sym1` and dot tokens, because they are
unnecessary.
- This also demonstrates that the comment about `Spacing::Alone` is
wrong -- that value is never used. That comment was added in #77250,
and AFAICT it has always been incorrect.
The commit also expands comments. I found this code hard to read
previously, the examples in comments make it easier.
Pass in the span for the field rather than using `prev_token`.
Also rename it `mk_expr_tuple_field_access`, because it doesn't do any
actual parsing, it just creates an expression with what it's given.
Not much of a clarity win by itself, but unlocks additional subsequent
simplifications.
Handle str literals written with `'` lexed as lifetime
Given `'hello world'` and `'1 str', provide a structured suggestion for a valid string literal:
```
error[E0762]: unterminated character literal
--> $DIR/lex-bad-str-literal-as-char-3.rs:2:26
|
LL | println!('hello world');
| ^^^^
|
help: if you meant to write a `str` literal, use double quotes
|
LL | println!("hello world");
| ~ ~
```
```
error[E0762]: unterminated character literal
--> $DIR/lex-bad-str-literal-as-char-1.rs:2:20
|
LL | println!('1 + 1');
| ^^^^
|
help: if you meant to write a `str` literal, use double quotes
|
LL | println!("1 + 1");
| ~ ~
```
Fix#119685.
Experimental feature postfix match
This has a basic experimental implementation for the RFC postfix match (rust-lang/rfcs#3295, #121618). [Liaison is](https://rust-lang.zulipchat.com/#narrow/stream/213817-t-lang/topic/Postfix.20Match.20Liaison/near/423301844) ```@scottmcm``` with the lang team's [experimental feature gate process](https://github.com/rust-lang/lang-team/blob/master/src/how_to/experiment.md).
This feature has had an RFC for a while, and there has been discussion on it for a while. It would probably be valuable to see it out in the field rather than continue discussing it. This feature also allows to see how popular postfix expressions like this are for the postfix macros RFC, as those will take more time to implement.
It is entirely implemented in the parser, so it should be relatively easy to remove if needed.
This PR is split in to 5 commits to ease review.
1. The implementation of the feature & gating.
2. Add a MatchKind field, fix uses, fix pretty.
3. Basic rustfmt impl, as rustfmt crashes upon seeing this syntax without a fix.
4. Add new MatchSource to HIR for Clippy & other HIR consumers
Implement macro-based deref!() syntax for deref patterns
Stop using `box PAT` syntax for deref patterns, and instead use a perma-unstable macro.
Blocked on #122222
r? `@Nadrieril`
Interpolated cleanups
Various cleanups I made while working on attempts to remove `Interpolated`, that are worth merging now. Best reviewed one commit at a time.
r? `@petrochenkov`
Inline a bunch of trivial conditions in parser
It is often the case that these small, conditional functions, when inlined, reveal notable optimization opportunities to LLVM. While saethlin has done a lot of good work on making these kinds of small functions not need `#[inline]` tags as much, being clearer about what we want inlined will get both the MIR opts and LLVM to pursue it more aggressively.
On local perf runs, this seems fruitful. Let's see what rust-timer says.
r? `@ghost`
This commit combines `MatchedTokenTree` and `MatchedNonterminal`, which
are often considered together, into a single `MatchedSingle`. It shares
a representation with the newly-parameterized `ParseNtResult`.
This will also make things much simpler if/when variants from
`Interpolated` start being moved to `ParseNtResult`.
There are a bunch of small helper conditionals we use.
Inline them to get slightly better perf in a few cases,
especially when rustc is compiled without PGO.
Ensure stack before parsing dot-or-call
There are many cases where, due to codegen or a massively unruly codebase, a deeply nested `call(call(call(call(call(call(call(call(call(f())))))))))` can happen. This is a spot where it would be good to grow our stack, so that we can survive to tell the programmer their code is dubiously written.
Closes https://github.com/rust-lang/rust/issues/122715
There are many cases where, due to codegen or a massively unruly codebase,
a deeply nested call(call(call(call(call(call(call(call(call(f())))))))))
can happen. This is a spot where it would be good to grow our stack, so that
we can survive to tell the programmer their code is dubiously written.
Stabilize associated type bounds (RFC 2289)
This PR stabilizes associated type bounds, which were laid out in [RFC 2289]. This gives us a shorthand to express nested type bounds that would otherwise need to be expressed with nested `impl Trait` or broken into several `where` clauses.
### What are we stabilizing?
We're stabilizing the associated item bounds syntax, which allows us to put bounds in associated type position within other bounds, i.e. `T: Trait<Assoc: Bounds...>`. See [RFC 2289] for motivation.
In all position, the associated type bound syntax expands into a set of two (or more) bounds, and never anything else (see "How does this differ[...]" section for more info).
Associated type bounds are stabilized in four positions:
* **`where` clauses (and APIT)** - This is equivalent to breaking up the bound into two (or more) `where` clauses. For example, `where T: Trait<Assoc: Bound>` is equivalent to `where T: Trait, <T as Trait>::Assoc: Bound`.
* **Supertraits** - Similar to above, `trait CopyIterator: Iterator<Item: Copy> {}`. This is almost equivalent to breaking up the bound into two (or more) `where` clauses; however, the bound on the associated item is implied whenever the trait is used. See #112573/#112629.
* **Associated type item bounds** - This allows constraining the *nested* rigid projections that are associated with a trait's associated types. e.g. `trait Trait { type Assoc: Trait2<Assoc2: Copy>; }`.
* **opaque item bounds (RPIT, TAIT)** - This allows constraining associated types that are associated with the opaque without having to *name* the opaque. For example, `impl Iterator<Item: Copy>` defines an iterator whose item is `Copy` without having to actually name that item bound.
The latter three are not expressible in surface Rust (though for associated type item bounds, this will change in #120752, which I don't believe should block this PR), so this does represent a slight expansion of what can be expressed in trait bounds.
### How does this differ from the RFC?
Compared to the RFC, the current implementation *always* desugars associated type bounds to sets of `ty::Clause`s internally. Specifically, it does *not* introduce a position-dependent desugaring as laid out in [RFC 2289], and in particular:
* It does *not* desugar to anonymous associated items in associated type item bounds.
* It does *not* desugar to nested RPITs in RPIT bounds, nor nested TAITs in TAIT bounds.
This position-dependent desugaring laid out in the RFC existed simply to side-step limitations of the trait solver, which have mostly been fixed in #120584. The desugaring laid out in the RFC also added unnecessary complication to the design of the feature, and introduces its own limitations to, for example:
* Conditionally lowering to nested `impl Trait` in certain positions such as RPIT and TAIT means that we inherit the limitations of RPIT/TAIT, namely lack of support for higher-ranked opaque inference. See this code example: https://github.com/rust-lang/rust/pull/120752#issuecomment-1979412531.
* Introducing anonymous associated types makes traits no longer object safe, since anonymous associated types are not nameable, and all associated types must be named in `dyn` types.
This last point motivates why this PR is *not* stabilizing support for associated type bounds in `dyn` types, e.g, `dyn Assoc<Item: Bound>`. Why? Because `dyn` types need to have *concrete* types for all associated items, this would necessitate a distinct lowering for associated type bounds, which seems both complicated and unnecessary compared to just requiring the user to write `impl Trait` themselves. See #120719.
### Implementation history:
Limited to the significant behavioral changes and fixes and relevant PRs, ping me if I left something out--
* #57428
* #108063
* #110512
* #112629
* #120719
* #120584Closes#52662
[RFC 2289]: https://rust-lang.github.io/rfcs/2289-associated-type-bounds.html
Given `'hello world'` and `'1 str', provide a structured suggestion for a valid string literal:
```
error[E0762]: unterminated character literal
--> $DIR/lex-bad-str-literal-as-char-3.rs:2:26
|
LL | println!('hello world');
| ^^^^
|
help: if you meant to write a `str` literal, use double quotes
|
LL | println!("hello world");
| ~ ~
```
```
error[E0762]: unterminated character literal
--> $DIR/lex-bad-str-literal-as-char-1.rs:2:20
|
LL | println!('1 + 1');
| ^^^^
|
help: if you meant to write a `str` literal, use double quotes
|
LL | println!("1 + 1");
| ~ ~
```
Fix#119685.
Add a tidy check that checks whether the fluent slugs only appear once
As ``````@Nilstrieb`````` said in https://github.com/rust-lang/rust/pull/121828#issuecomment-1972622855:
> Might make sense to have a tidy check that checks whether the fluent slugs only appear once in the source code and lint for that
there's a tidy check already for sorting
We can get the tidy check error:
```
tidy check
tidy error: /path/to/rust/compiler/rustc_const_eval/messages.ftl: message `const_eval_invalid_align` is not used
tidy error: /path/to/rust/compiler/rustc_lint/messages.ftl: message `lint_trivial_untranslatable_diag` is not used
tidy error: /path/to/rust/compiler/rustc_parse/messages.ftl: message `parse_invalid_literal_suffix` is not used
tidy error: /path/to/rust/compiler/rustc_infer/messages.ftl: message `infer_need_type_info_in_coroutine` is not used
tidy error: /path/to/rust/compiler/rustc_passes/messages.ftl: message `passes_expr_not_allowed_in_context` is not used
tidy error: /path/to/rust/compiler/rustc_passes/messages.ftl: message `passes_layout` is not used
tidy error: /path/to/rust/compiler/rustc_parse/messages.ftl: message `parse_not_supported` is not used
```
r? ``````@Nilstrieb``````
Eagerly translate `HelpUseLatestEdition` in parser diagnostics
Fixes#122130.
This makes me suspicious of these other two usage of `add_to_diagnostic()`. Would they *also* crash? I haven't attempted to construct test cases for them.
```
compiler/rustc_parse/src/parser/expr.rs
3453: errors::HelpUseLatestEdition::new().add_to_diagnostic(e);
compiler/rustc_hir_typeck/src/expr.rs
2603: HelpUseLatestEdition::new().add_to_diagnostic(&mut err);
```
This also seems like a footgun?
