Existing names for values of this type are `sess`, `parse_sess`,
`parse_session`, and `ps`. `sess` is particularly annoying because
that's also used for `Session` values, which are often co-located, and
it can be difficult to know which type a value named `sess` refers to.
(That annoyance is the main motivation for this change.) `psess` is nice
and short, which is good for a name used this much.
The commit also renames some `parse_sess_created` values as
`psess_created`.
I have a suspicion that quite a few delayed bug paths are impossible to
reach, so I did an experiment.
I converted every `delayed_bug` to a `bug`, ran the full test suite,
then converted back every `bug` that was hit. A surprising number were
never hit.
The next commit will convert some more back, based on human judgment.
Currently many diagnostic modifier methods are available on both
`Diagnostic` and `DiagnosticBuilder`. This commit removes most of them
from `Diagnostic`. To minimize the diff size, it keeps them within
`diagnostic.rs` but changes the surrounding `impl Diagnostic` block to
`impl DiagnosticBuilder`. (I intend to move things around later, to give
a more sensible code layout.)
`Diagnostic` keeps a few methods that it still needs, like `sub`,
`arg`, and `replace_args`.
The `forward!` macro, which defined two additional methods per call
(e.g. `note` and `with_note`), is replaced by the `with_fn!` macro,
which defines one additional method per call (e.g. `with_note`). It's
now also only used when necessary -- not all modifier methods currently
need a `with_*` form. (New ones can be easily added as necessary.)
All this also requires changing `trait AddToDiagnostic` so its methods
take `DiagnosticBuilder` instead of `Diagnostic`, which leads to many
mechanical changes. `SubdiagnosticMessageOp` gains a type parameter `G`.
There are three subdiagnostics -- `DelayedAtWithoutNewline`,
`DelayedAtWithNewline`, and `InvalidFlushedDelayedDiagnosticLevel` --
that are created within the diagnostics machinery and appended to
external diagnostics. These are handled at the `Diagnostic` level, which
means it's now hard to construct them via `derive(Diagnostic)`, so
instead we construct them by hand. This has no effect on what they look
like when printed.
There are lots of new `allow` markers for `untranslatable_diagnostics`
and `diagnostics_outside_of_impl`. This is because
`#[rustc_lint_diagnostics]` annotations were present on the `Diagnostic`
modifier methods, but missing from the `DiagnosticBuilder` modifier
methods. They're now present.
Add an ErrorGuaranteed to ast::TyKind::Err (attempt 2)
This makes it more like `hir::TyKind::Err`, and avoids a `has_errors` assertion in `LoweringContext::lower_ty_direct`.
r? ```@oli-obk```
Add `ErrorGuaranteed` to `ast::LitKind::Err`, `token::LitKind::Err`.
Similar to recent work doing the same for `ExprKind::Err` (#120586) and `TyKind::Err` (#121109).
r? `@oli-obk`
This mostly works well, and eliminates a couple of delayed bugs.
One annoying thing is that we should really also add an
`ErrorGuaranteed` to `proc_macro::bridge::LitKind::Err`. But that's
difficult because `proc_macro` doesn't have access to `ErrorGuaranteed`,
so we have to fake it.
This makes it more like `hir::TyKind::Err`, and avoids a
`span_delayed_bug` call in `LoweringContext::lower_ty_direct`.
It also requires adding `ast::TyKind::Dummy`, now that
`ast::TyKind::Err` can't be used for that purpose in the absence of an
error emission.
There are a couple of cases that aren't as neat as I would have liked,
marked with `FIXME` comments.
For some cases where it's clear that an error has already occurred,
e.g.:
- there's a comment stating exactly that, or
- things like HIR lowering, where we are lowering an error kind
The commit also tweaks some comments around delayed bug sites.
For a rigid projection, recursively look at the self type's item bounds to fix the `associated_type_bounds` feature
Given a deeply nested rigid projection like `<<<T as Trait1>::Assoc1 as Trait2>::Assoc2 as Trait3>::Assoc3`, this PR adjusts both trait solvers to look at the item bounds for all of `Assoc3`, `Assoc2`, and `Assoc1` in order to satisfy a goal. We do this because the item bounds for projections may contain relevant bounds for *other* nested projections when the `associated_type_bounds` (ATB) feature is enabled. For example:
```rust
#![feature(associated_type_bounds)]
trait Trait1 {
type Assoc1: Trait2<Assoc2: Foo>;
// Item bounds for `Assoc1` are:
// `<Self as Trait1>::Assoc1: Trait2`
// `<<Self as Trait1>::Assoc1 as Trait2>::Assoc2: Foo`
}
trait Trait2 {
type Assoc2;
}
trait Foo {}
fn hello<T: Trait1>(x: <<T as Trait1>::Assoc1 as Trait2>::Assoc2) {
fn is_foo(_: impl Foo) {}
is_foo(x);
// Currently fails with:
// ERROR the trait bound `<<Self as Trait1>::Assoc1 as Trait2>::Assoc2: Foo` is not satisfied
}
```
This has been a long-standing place of brokenness for ATBs, and is also part of the reason why ATBs currently desugar so differently in various positions (i.e. sometimes desugaring to param-env bounds, sometimes desugaring to RPITs, etc). For example, in RPIT and TAIT position, `impl Foo<Bar: Baz>` currently desugars to `impl Foo<Bar = impl Baz>` because we do not currently take advantage of these nested item bounds if we desugared them into a single set of item bounds on the opaque. This is obviously both strange and unnecessary if we just take advantage of these bounds as we should.
## Approach
This PR repeatedly peels off each projection of a given goal's self type and tries to match its item bounds against a goal, repeating with the self type of the projection. This is pretty straightforward to implement in the new solver, only requiring us to loop on the self type of a rigid projection to discover inner rigid projections, and we also need to introduce an extra probe so we can normalize them.
In the old solver, we can do essentially the same thing, however we rely on the fact that projections *should* be normalized already. This is obviously not always the case -- however, in the case that they are not fully normalized, such as a projection which has both infer vars and, we bail out with ambiguity if we hit an infer var for the self type.
## Caveats
⚠️ In the old solver, this has the side-effect of actually stalling some higher-ranked trait goals of the form `for<'a> <?0 as Tr<'a>>: Tr2`. Because we stall them, they no longer are eagerly treated as error -- this cause some existing `known-bug` tests to go from fail -> pass.
I'm pretty unconvinced that this is a problem since we make code that we expect to pass in the *new* solver also pass in the *old* solver, though this obviously doesn't solve the *full* problem.
## And then also...
We also adjust the desugaring of ATB to always desugar to a regular associated bound, rather than sometimes to an impl Trait **except** for when the ATB is present in a `dyn Trait`. We need to lower `dyn Trait<Assoc: Bar>` to `dyn Trait<Assoc = impl Bar>` because object types need all of their associated types specified.
I would also be in favor of splitting out the ATB feature and/or removing support for object types in order to stabilize just the set of positions for which the ATB feature is consistent (i.e. always elaborates to a bound).
Invert diagnostic lints.
That is, change `diagnostic_outside_of_impl` and `untranslatable_diagnostic` from `allow` to `deny`, because more than half of the compiler has been converted to use translated diagnostics.
This commit removes more `deny` attributes than it adds `allow` attributes, which proves that this change is warranted.
r? ````@davidtwco````
No need to take `ImplTraitContext` by ref
We used to mutate `ImplTraitContext`, so it used to be `&mut` mutable ref. Then I think it used to have non-`Copy` data in it, so we took it by `&` ref. Now, none of that remains, so just copy it around.
hir: Stop keeping prefixes for most of `use` list stems
And make sure all other imports have non-empty resolution lists.
Addresses one of FIXMEs in https://github.com/rust-lang/rust/pull/120206.
Rework support for async closures; allow them to return futures that borrow from the closure's captures
This PR implements a new lowering for async closures via `TyKind::CoroutineClosure` which handles the curious relationship between the closure and the coroutine that it returns.
I wrote up a bunch in [this hackmd](https://hackmd.io/`@compiler-errors/S1HvqQxca)` which will be copied to the dev guide after this PR lands, and hopefully left sufficient comments in the source code explaining why this change is as large as it is.
This also necessitates that they begin implementing the `AsyncFn`-family of traits, rather than the `Fn`-family of traits -- if you need `Fn` implementations, you should probably use the non-sugar `|| async {}` syntax instead.
Notably this PR does not yet implement `async Fn()` syntax sugar for bounds, but I expect to add those soon (**edit:** #120392). For now, users must use `AsyncFn()` traits directly, which necessitates adding the `async_fn_traits` feature gate as well. I will add this as a follow-up very soon.
r? oli-obk
This is based on top of #120322, but that PR is minimal.
That is, change `diagnostic_outside_of_impl` and
`untranslatable_diagnostic` from `allow` to `deny`, because more than
half of the compiler has be converted to use translated diagnostics.
This commit removes more `deny` attributes than it adds `allow`
attributes, which proves that this change is warranted.
Introduce support for `async` bound modifier on `Fn*` traits
Adds `async` to the list of `TraitBoundModifiers`, which instructs AST lowering to map the trait to an async flavor of the trait. For now, this is only supported for `Fn*` to `AsyncFn*`, and I expect that this manual mapping via lang items will be replaced with a better system in the future.
The motivation for adding these bounds is to separate the users of async closures from the exact trait desugaring of their callable bounds. Instead of users needing to be concerned with the `AsyncFn` trait, they should be able to write `async Fn()` and it will desugar to whatever underlying trait we decide is best for the lowering of async closures.
Note: rustfmt support can be done in the rustfmt repo after a subtree sync.
Error codes are integers, but `String` is used everywhere to represent
them. Gross!
This commit introduces `ErrCode`, an integral newtype for error codes,
replacing `String`. It also introduces a constant for every error code,
e.g. `E0123`, and removes the `error_code!` macro. The constants are
imported wherever used with `use rustc_errors::codes::*`.
With the old code, we have three different ways to specify an error code
at a use point:
```
error_code!(E0123) // macro call
struct_span_code_err!(dcx, span, E0123, "msg"); // bare ident arg to macro call
\#[diag(name, code = "E0123")] // string
struct Diag;
```
With the new code, they all use the `E0123` constant.
```
E0123 // constant
struct_span_code_err!(dcx, span, E0123, "msg"); // constant
\#[diag(name, code = E0123)] // constant
struct Diag;
```
The commit also changes the structure of the error code definitions:
- `rustc_error_codes` now just defines a higher-order macro listing the
used error codes and nothing else.
- Because that's now the only thing in the `rustc_error_codes` crate, I
moved it into the `lib.rs` file and removed the `error_codes.rs` file.
- `rustc_errors` uses that macro to define everything, e.g. the error
code constants and the `DIAGNOSTIC_TABLES`. This is in its new
`codes.rs` file.
