This ensures that the tests actually test what they are meant to test
rather than exitting immediately with an error that -Zquery-dep-graph
has to be passed.
Check def id before calling `match_projection_projections`
When I "inlined" `assemble_candidates_from_predicates` into `for_each_item_bound` in #120584, I forgot to copy over the check that actually made sure the def id of the candidate was equal to the def id of the obligation. This means that we normalize goal a bit too often even if it's not productive to do so.
This PR adds that def id check back.
Fixes#123448
CFI: Restore typeid_for_instance default behavior
Restore typeid_for_instance default behavior of performing self type erasure, since it's the most common case and what it does most of the time. Using concrete self (or not performing self type erasure) is for assigning a secondary type id, and secondary type ids are only assigned when they're unique and to methods, and also are only tested for when methods are used as function pointers.
Add aarch64-apple-visionos and aarch64-apple-visionos-sim tier 3 targets
Introduces `aarch64-apple-visionos` and `aarch64-apple-visionos-sim` as tier 3 targets. This allows native development for the Apple Vision Pro's visionOS platform.
This work has been tracked in https://github.com/rust-lang/compiler-team/issues/642. There is a corresponding `libc` change https://github.com/rust-lang/libc/pull/3568 that is not required for merge.
Ideally we would be able to incorporate [this change](https://github.com/gimli-rs/object/pull/626) to the `object` crate, but the author has stated that a release will not be cut for quite a while. Therefore, the two locations that would reference the xrOS constant from `object` are hardcoded to their MachO values of 11 and 12, accompanied by TODOs to mark the code as needing change. I am open to suggestions on what to do here to get this checked in.
# Tier 3 Target Policy
At this tier, the Rust project provides no official support for a target, so we place minimal requirements on the introduction of targets.
> A tier 3 target must have a designated developer or developers (the "target maintainers") on record to be CCed when issues arise regarding the target. (The mechanism to track and CC such developers may evolve over time.)
See [src/doc/rustc/src/platform-support/apple-visionos.md](e88379034a/src/doc/rustc/src/platform-support/apple-visionos.md)
> Targets must use naming consistent with any existing targets; for instance, a target for the same CPU or OS as an existing Rust target should use the same name for that CPU or OS. Targets should normally use the same names and naming conventions as used elsewhere in the broader ecosystem beyond Rust (such as in other toolchains), unless they have a very good reason to diverge. Changing the name of a target can be highly disruptive, especially once the target reaches a higher tier, so getting the name right is important even for a tier 3 target.
> * Target names should not introduce undue confusion or ambiguity unless absolutely necessary to maintain ecosystem compatibility. For example, if the name of the target makes people extremely likely to form incorrect beliefs about what it targets, the name should be changed or augmented to disambiguate it.
> * If possible, use only letters, numbers, dashes and underscores for the name. Periods (.) are known to cause issues in Cargo.
This naming scheme matches `$ARCH-$VENDOR-$OS-$ABI` which is matches the iOS Apple Silicon simulator (`aarch64-apple-ios-sim`) and other Apple targets.
> Tier 3 targets may have unusual requirements to build or use, but must not
create legal issues or impose onerous legal terms for the Rust project or for
Rust developers or users.
> - The target must not introduce license incompatibilities.
> - Anything added to the Rust repository must be under the standard Rust license (`MIT OR Apache-2.0`).
> - The target must not cause the Rust tools or libraries built for any other host (even when supporting cross-compilation to the target) to depend on any new dependency less permissive than the Rust licensing policy. This applies whether the dependency is a Rust crate that would require adding new license exceptions (as specified by the `tidy` tool in the rust-lang/rust repository), or whether the dependency is a native library or binary. In other words, the introduction of the target must not cause a user installing or running a version of Rust or the Rust tools to besubject to any new license requirements.
> - Compiling, linking, and emitting functional binaries, libraries, or other code for the target (whether hosted on the target itself or cross-compiling from another target) must not depend on proprietary (non-FOSS) libraries. Host tools built for the target itself may depend on the ordinary runtime libraries supplied by the platform and commonly used by other applications built for the target, but those libraries must not be required for code generation for the target; cross-compilation to the target must not require such libraries at all. For instance, `rustc` built for the target may depend on a common proprietary C runtime library or console output library, but must not depend on a proprietary code generation library or code optimization library. Rust's license permits such combinations, but the Rust project has no interest in maintaining such combinations within the scope of Rust itself, even at tier 3.
> - "onerous" here is an intentionally subjective term. At a minimum, "onerous" legal/licensing terms include but are *not* limited to: non-disclosure requirements, non-compete requirements, contributor license agreements (CLAs) or equivalent, "non-commercial"/"research-only"/etc terms, requirements conditional on the employer or employment of any particular Rust developers, revocable terms, any requirements that create liability for the Rust project or its developers or users, or any requirements that adversely affect the livelihood or prospects of the Rust project or its developers or users.
This contribution is fully available under the standard Rust license with no additional legal restrictions whatsoever. This PR does not introduce any new dependency less permissive than the Rust license policy.
The new targets do not depend on proprietary libraries.
> Tier 3 targets should attempt to implement as much of the standard libraries as possible and appropriate (core for most targets, alloc for targets that can support dynamic memory allocation, std for targets with an operating system or equivalent layer of system-provided functionality), but may leave some code unimplemented (either unavailable or stubbed out as appropriate), whether because the target makes it impossible to implement or challenging to implement. The authors of pull requests are not obligated to avoid calling any portions of the standard library on the basis of a tier 3 target not implementing those portions.
This new target mirrors the standard library for watchOS and iOS, with minor divergences.
> The target must provide documentation for the Rust community explaining how to build for the target, using cross-compilation if possible. If the target supports running binaries, or running tests (even if they do not pass), the documentation must explain how to run such binaries or tests for the target, using emulation if possible or dedicated hardware if necessary.
Documentation is provided in [src/doc/rustc/src/platform-support/apple-visionos.md](e88379034a/src/doc/rustc/src/platform-support/apple-visionos.md)
> Neither this policy nor any decisions made regarding targets shall create any binding agreement or estoppel by any party. If any member of an approving Rust team serves as one of the maintainers of a target, or has any legal or employment requirement (explicit or implicit) that might affect their decisions regarding a target, they must recuse themselves from any approval decisions regarding the target's tier status, though they may otherwise participate in discussions.
> * This requirement does not prevent part or all of this policy from being cited in an explicit contract or work agreement (e.g. to implement or maintain support for a target). This requirement exists to ensure that a developer or team responsible for reviewing and approving a target does not face any legal threats or obligations that would prevent them from freely exercising their judgment in such approval, even if such judgment involves subjective matters or goes beyond the letter of these requirements.
> Tier 3 targets must not impose burden on the authors of pull requests, or other developers in the community, to maintain the target. In particular, do not post comments (automated or manual) on a PR that derail or suggest a block on the PR based on a tier 3 target. Do not send automated messages or notifications (via any medium, including via `@)` to a PR author or others involved with a PR regarding a tier 3 target, unless they have opted into such messages.
> * Backlinks such as those generated by the issue/PR tracker when linking to an issue or PR are not considered a violation of this policy, within reason. However, such messages (even on a separate repository) must not generate notifications to anyone involved with a PR who has not requested such notifications.
> Patches adding or updating tier 3 targets must not break any existing tier 2 or tier 1 target, and must not knowingly break another tier 3 target without approval of either the compiler team or the maintainers of the other tier 3 target.
> * In particular, this may come up when working on closely related targets, such as variations of the same architecture with different features. Avoid introducing unconditional uses of features that another variation of the target may not have; use conditional compilation or runtime detection, as appropriate, to let each target run code supported by that target.
I acknowledge these requirements and intend to ensure that they are met.
This target does not touch any existing tier 2 or tier 1 targets and should not break any other targets.
Port `run-make/issue-7349` to a codegen test
The test does not need to be a run-make test, it can use the codegen test infrastructure.
Also took the opportunity to rename the test to `no-redundant-item-monomorphization` so it's not just some opaque issue number.
Part of #121876.
Actually use the inferred `ClosureKind` from signature inference in coroutine-closures
A follow-up to https://github.com/rust-lang/rust/pull/123349, which fixes another subtle bug: We were not taking into account the async closure kind we infer during closure signature inference.
When I pass a closure directly to an arg like `fn(x: impl async FnOnce())`, that should have the side-effect of artificially restricting the kind of the async closure to `ClosureKind::FnOnce`. We weren't doing this -- that's a quick fix; however, it uncovers a second, more subtle bug with the way that `move`, async closures, and `FnOnce` interact.
Specifically, when we have an async closure like:
```
let x = Struct;
let c = infer_as_fnonce(async move || {
println!("{x:?}");
}
```
The outer closure captures `x` by move, but the inner coroutine still immutably borrows `x` from the outer closure. Since we've forced the closure to by `async FnOnce()`, we can't actually *do* a self borrow, since the signature of `AsyncFnOnce::call_once` doesn't have a borrowed lifetime. This means that all `async move` closures that are constrained to `FnOnce` will fail borrowck.
We can fix that by detecting this case specifically, and making the *inner* async closure `move` as well. This is always beneficial to closure analysis, since if we have an `async FnOnce()` that's `move`, there's no reason to ever borrow anything, so `move` isn't artificially restrictive.
Match ergonomics: implement "`&`pat everywhere"
Implements the eat-two-layers (feature gate `and_pat_everywhere`, all editions) ~and the eat-one-layer (feature gate `and_eat_one_layer_2024`, edition 2024 only, takes priority on that edition when both feature gates are active)~ (EDIT: will be done in later PR) semantics.
cc #123076
r? ``@Nadrieril``
``@rustbot`` label A-patterns A-edition-2024
Restore typeid_for_instance default behavior of performing self type
erasure, since it's the most common case and what it does most of the
time. Using concrete self (or not performing self type erasure) is for
assigning a secondary type id, and secondary type ids are only assigned
when they're unique and to methods, and also are only tested for when
methods are used as function pointers.
CFI: Add test for `call_once` addr taken
One of the proposed ways to reduce the non-passed argument erasure would cause this test to fail. Adding this now ensures that any attempt to reduce non-passed argument erasure won't make the same mistake.
r? `@compiler-errors`
cc `@rcvalle`
Default to light theme if JS is enabled but not working
It doesn't [fix] #123399 but it allows to reduce the problem:
* if JS is completely disabled, then `noscript.css` will be applied
* if JS failed for any reason, then the light theme will be applied (because `noscript.css` won't be applied)
r? `@notriddle`
change `NormalizesTo` to fully structurally normalize
notes in https://hackmd.io/wZ016dE4QKGIhrOnHLlThQ
need to also update the dev-guide once this PR lands. in short, the setup is now as follows:
`normalizes-to` internally implements one step normalization, applying that normalization to the `goal.predicate.term` causes the projected term to get recursively normalized. With this `normalizes-to` normalizes until the projected term is rigid, meaning that we normalize as many steps necessary, but at least 1.
To handle rigid aliases, we add another candidate only if the 1 to inf step normalization failed. With this `normalizes-to` is now full structural normalization. We can now change `AliasRelate` to simply emit `normalizes-to` goals for the rhs and lhs.
This avoids the concerns from https://github.com/rust-lang/trait-system-refactor-initiative/issues/103 and generally feels cleaner
One of the proposed ways to reduce the non-passed argument erasure would
cause this test to fail. Adding this now ensures that any attempt to
reduce non-passed argument erasure won't make the same mistake.
some smaller DefiningOpaqueTypes::No -> Yes switches
r? `@compiler-errors`
These are some easy cases, so let's get them out of the way first.
I added tests exercising the specialization code paths that I believe weren't tested so far.
follow-up to https://github.com/rust-lang/rust/pull/117348
Only inspect user-written predicates for privacy concerns
fixes#123288
Previously we looked at the elaborated predicates, which, due to adding various bounds on fields, end up requiring trivially true bounds. But these bounds can contain private types, which the privacy visitor then found and errored about.
match lowering: make false edges more precise
When lowering match expressions, we add false edges to hide details of the lowering from borrowck. Morally we pretend we're testing the patterns (and guards) one after the other in order. See the tests for examples. Problem is, the way we implement this today is too coarse for deref patterns.
In deref patterns, a pattern like `deref [1, x]` matches on a `Vec` by creating a temporary to store the output of the call to `deref()` and then uses that to continue matching. Here the pattern has a binding, which we set up after the pre-binding block. Problem is, currently the false edges tell borrowck that the pre-binding block can be reached from a previous arm as well, so the `deref()` temporary may not be initialized. This triggers an error when we try to use the binding `x`.
We could call `deref()` a second time, but this opens the door to soundness issues if the deref impl is weird. Instead in this PR I rework false edges a little bit.
What we need from false edges is a (fake) path from each candidate to the next, specifically from candidate C's pre-binding block to next candidate D's pre-binding block. Today, we link the pre-binding blocks directly. In this PR, I link them indirectly by choosing an earlier node on D's success path. Specifically, I choose the earliest block on D's success path that doesn't make a loop (if I chose e.g. the start block of the whole match (which is on the success path of all candidates), that would make a loop). This turns out to be rather straightforward to implement.
r? `@matthewjasper` if you have the bandwidth, otherwise let me know
check `FnDef` return type for WF
better version of #106807, fixes#84533 (mostly). It's not perfect given that we still ignore WF requirements involving bound regions but I wasn't able to quickly write an example, so even if theoretically exploitable, it should be far harder to trigger.
This is strictly more restrictive than checking the return type for WF as part of the builtin `FnDef: FnOnce` impl (#106807) and moving to this approach in the future will not break any code.
~~It also agrees with my theoretical view of how this should behave~~
r? types
