Support `clobber_abi` in AVR inline assembly
This PR implements the `clobber_abi` part necessary to eventually stabilize the inline assembly for AVR. This is tracked in #93335.
This is heavily inspired by the sibling-PR #131310 for the MSP430. I've explained my reasoning in the first commit message in detail, which is reproduced below for easier reviewing:
This follows the [ABI documentation] of AVR-GCC:
> The [...] call-clobbered general purpose registers (GPRs) are registers that might be destroyed (clobbered) by a function call.
>
> - **R18–R27, R30, R31**
>
> These GPRs are call clobbered. An ordinary function may use them without restoring the contents. [...]
>
> - **R0, T-Flag**
>
> The temporary register and the T-flag in SREG are also call-clobbered, but this knowledge is not exposed explicitly to the compiler (R0 is a fixed register).
Therefore this commit lists the aforementioned registers `r18–r27`, `r30` and `r31` as clobbered registers. Since the `r0` register (listed above as well) is not available in inline assembly at all (potentially because the AVR-GCC considers it a fixed register causing the register to never be used in register allocation and LLVM adopting this), there is no need to list it in the clobber list (the `r0`-variant is not even available). A comment was added to ensure, that the `r0` gets added to the clobber-list once the register gets usable in inline ASM.
Since the SREG is normally considered clobbered anyways (unless the user supplies the `preserve_flags`-option), there is no need to explicitly list a bit in this register (which is not possible to list anyways).
Note, that this commit completely ignores the case of interrupts (that are described in the ABI-specification), since every register touched in an ISR need to be saved anyways.
[ABI documentation]: https://gcc.gnu.org/wiki/avr-gcc#Call-Used_Registers
r? ``@Amanieu``
``@rustbot`` label +O-AVR
This is currently handled automatically by the fact that codegen doesn't visit
coverage statements in unused functions, but that will no longer be the case
when unused IDs are identified by a separate query instead.
Rollup of 7 pull requests
Successful merges:
- #132782 (improvements on initial sysroot and libdir finding logics)
- #133466 (Fix typos in pin.rs)
- #133492 (bootstrap: allow skipping steps with start of path)
- #133501 (support revealing defined opaque post borrowck)
- #133530 (Use consistent wording in docs, use is zero instead of is 0)
- #133538 (Better diagnostic for fn items in variadic functions)
- #133590 (Rename `-Zparse-only`)
r? `@ghost`
`@rustbot` modify labels: rollup
support revealing defined opaque post borrowck
By adding a new `TypingMode::PostBorrowckAnalysis`. Currently only supported with the new solver and I didn't look into the way we replace `ReErased`. ``@compiler-errors`` mentioned that always using existentials may be unsound.
r? ``@compiler-errors``
Remove `HybridBitSet`
`HybridBitSet` was introduced under the name `HybridIdxSetBuf` way back in #53383 where it was a big win for NLL borrow checker performance. In #93984 the more flexible `ChunkedBitSet` was added. Uses of `HybridBitSet` have gradually disappeared (e.g. #116152) and there are now few enough that they can be replaced with `BitSet` or `ChunkedBitSet`, and `HybridBitSet` can be removed, cutting more than 700 lines of code.
r? `@Mark-Simulacrum`
As part of the larger goal of reducing `HybridBitSet` use in general.
This code is for debugging only and isn't performance sensitive, so
`ChunkedBitSet` should be fine.
The current implementation is slow because it does an operation for
every bit in the set, even zero bits. So if you have a large bitset with
many zero bits (which is common) it's very slow.
This commit improves the iterator to skip over `Zeros` chunks in a
single step, and uses the fast `BitIter` for `Mixed` chunks. It also
removes the existing `fold` implementation, which was only there because
the old iterator was slow.
- Fix a typo in a comment.
- Remove unnecessary `Chunk::` qualifiers.
- Rename `ChunkedBitIter::bitset` as `ChunkedBitIter::bit_set`, because
`bit_set` is the form used everywhere else.
- Avoid some unnecessary local variables.
`ChunkedBitSet::is_empty` currently does an unnecessary check. This
commit removes that check and adds clarifying comments and an assertion
that demonstrate why it's unnecessary.
Revert #133418 (Store coverage source regions as `Span`) due to regression #133606
This reverts commit adf9b5fcd1, reversing changes made to af1ca153d4.
Reverting #133418 due to regressions reported at #133606.
r? jieyouxu
ensure JSON-defined targets are consistent
We have a `check_consistency` check that ensures some invariants which (presumably) the rest of the compiler relies on. However, JSON targets can easily be written in a way that violates those invariants. So this PR applies the same consistency check to JSON targets that we already enforce for built-in targets.
I have converted many of the assertions in that function to new macros that show a nice error instead of a panic; if people are okay with the general approach here, I can do that for the rest of the checks as well.
Enable -Zshare-generics for inline(never) functions
This avoids inlining cross-crate generic items when possible that are
already marked inline(never), implying that the author is not intending
for the function to be inlined by callers. As such, having a local copy
may make it easier for LLVM to optimize but mostly just adds to binary
bloat and codegen time. In practice our benchmarks indicate this is
indeed a win for larger compilations, where the extra cost in dynamic
linking to these symbols is diminished compared to the advantages in
fewer copies that need optimizing in each binary.
It might also make sense it expand this with other heuristics (e.g.,
`#[cold]`) in the future, but this seems like a good starting point.
FWIW, I expect that doing cleanup in where we make the decision
what should/shouldn't be shared is also a good idea. Way too
much code needed to be tweaked to check this. But I'm hoping
to leave that for a follow-up PR rather than blocking this on it.
this is funny though! apparently tidy parsed `.gitignore`, but did not
recognize unignore lines (`!...`), so tidy was ignoring `rustc_mir_build`
this whole time (at least for some lints?).
I was surprised to find that running with `-Zparse-only` only parses the
crate root file. Other files aren't parsed because that happens later
during expansion.
This commit renames the option and updates the help message to make this
clearer.
This reduces code sizes and better respects programmer intent when
marking inline(never). Previously such a marking was essentially ignored
for generic functions, as we'd still inline them in remote crates.
When we encounter an error caused by traits/types of different versions of the same crate, filter out the current crate when collecting spans to add to the context so we don't call `extern_crate` on the `DefId` of the current crate, which is meaningless and ICEs.
Produced output with this filter:
```
error[E0277]: the trait bound `foo::Struct: Trait` is not satisfied
--> y.rs:13:19
|
13 | check_trait::<foo::Struct>();
| ^^^^^^^^^^^ the trait `Trait` is not implemented for `foo::Struct`
|
note: there are multiple different versions of crate `foo` in the dependency graph
--> y.rs:7:1
|
4 | extern crate foo;
| ----------------- one version of crate `foo` is used here, as a direct dependency of the current crate
5 |
6 | pub struct Struct;
| ----------------- this type implements the required trait
7 | pub trait Trait {}
| ^^^^^^^^^^^^^^^ this is the required trait
|
::: x.rs:4:1
|
4 | pub struct Struct;
| ----------------- this type doesn't implement the required trait
5 | pub trait Trait {}
| --------------- this is the found trait
= note: two types coming from two different versions of the same crate are different types even if they look the same
= help: you can use `cargo tree` to explore your dependency tree
note: required by a bound in `check_trait`
--> y.rs:10:19
|
10 | fn check_trait<T: Trait>() {}
| ^^^^^ required by this bound in `check_trait`
```
Fix#133563.
always create `DefId`s for anon consts
but don't use them anywhere, we intentionally don't encode them in the crate metadata.
best reviewed by disabling whitespace.
This pretty much reimplements #133285 while adding the tests of #133455. Fixes#133064
r? `@BoxyUwU` `@compiler-errors`
This commit adds the relevant registers to the list of clobbered regis-
ters (part of #93335). This follows the [ABI documentation] of AVR-GCC:
> The [...] call-clobbered general purpose registers (GPRs) are
> registers that might be destroyed (clobbered) by a function call.
>
> - **R18–R27, R30, R31**
>
> These GPRs are call clobbered. An ordinary function may use them
> without restoring the contents. [...]
>
> - **R0, T-Flag**
>
> The temporary register and the T-flag in SREG are also call-
> clobbered, but this knowledge is not exposed explicitly to the
> compiler (R0 is a fixed register).
Therefore this commit lists the aforementioned registers `r18–r27`,
`r30` and `r31` as clobbered registers. Since the `r0` register (listed
above as well) is not available in inline assembly at all (potentially
because the AVR-GCC considers it a fixed register causing the register
to never be used in register allocation and LLVM adopting this), there
is no need to list it in the clobber list (the `r0`-variant is not even
available). A comment was added to ensure, that the `r0` gets added to
the clobber-list once the register gets usable in inline ASM.
Since the SREG is normally considered clobbered anyways (unless the user
supplies the `preserve_flags`-option), there is no need to explicitly
list a bit in this register (which is not possible to list anyways).
Note, that this commit completely ignores the case of interrupts (that
are described in the ABI-specification), since every register touched in
an ISR need to be saved anyways.
[ABI documentation]: https://gcc.gnu.org/wiki/avr-gcc#Call-Used_Registers
Cargo's -Zbuild-std has recently started checking this field, which
causes it to fail to compile even though we have full support for the
standard library on these targets.
Small doc fixes in `rustc_codegen_ssa`
I'm trying to make a toy codegen backend for `rustc`, and I got confused for a few minutes about what `codegen_backend` was referring to in the `CodegenBackend::join_codegen` docs.
Experimentally, it looks like the result of `CodegenBackend::codegen_crate` is passed to `CodegenBackend::join_codegen`, so this updates the docs to refer to that. This time using intra-doc links to hopefully cause people to notice if that gets out of date again.
Also, added another intra-doc link nearby, on `CodegenBackend::link`, for the same reason.
Fix clobber_abi in RV32E and RV64E inline assembly
Currently clobber_abi in RV32E and RV64E inline assembly is implemented using InlineAsmClobberAbi::RiscV, but broken since x16-x31 cannot be used in RV32E and RV64E.
```
error: cannot use register `x16`: register can't be used with the `e` target feature
--> <source>:42:14
|
42 | asm!("", clobber_abi("C"), options(nostack, nomem, preserves_flags));
| ^^^^^^^^^^^^^^^^
error: cannot use register `x17`: register can't be used with the `e` target feature
--> <source>:42:14
|
42 | asm!("", clobber_abi("C"), options(nostack, nomem, preserves_flags));
| ^^^^^^^^^^^^^^^^
error: cannot use register `x28`: register can't be used with the `e` target feature
--> <source>:42:14
|
42 | asm!("", clobber_abi("C"), options(nostack, nomem, preserves_flags));
| ^^^^^^^^^^^^^^^^
error: cannot use register `x29`: register can't be used with the `e` target feature
--> <source>:42:14
|
42 | asm!("", clobber_abi("C"), options(nostack, nomem, preserves_flags));
| ^^^^^^^^^^^^^^^^
error: cannot use register `x30`: register can't be used with the `e` target feature
--> <source>:42:14
|
42 | asm!("", clobber_abi("C"), options(nostack, nomem, preserves_flags));
| ^^^^^^^^^^^^^^^^
error: cannot use register `x31`: register can't be used with the `e` target feature
--> <source>:42:14
|
42 | asm!("", clobber_abi("C"), options(nostack, nomem, preserves_flags));
| ^^^^^^^^^^^^^^^^
```
r? `@Amanieu`
`@rustbot` label O-riscv +A-inline-assembly
Don't type error if we fail to coerce `Pin<T>` because it doesnt contain a ref
Fixes https://github.com/rust-lang/rust/issues/133222. Also moves some tests into a directory for better bookkeeping.
r? eholk or re-roll
`parse_expr_bottom` stores `this.token.span` in `lo`, but then fails to
use it in many places where it could. This commit fixes that, and
likewise (to a smaller extent) in `parse_ty_common`.
Rollup of 12 pull requests
Successful merges:
- #129409 (Expand std::os::unix::fs::chown() doc with a warning)
- #133320 (Add release notes for Rust 1.83.0)
- #133368 (Delay a bug when encountering an impl with unconstrained generics in `codegen_select`)
- #133428 (Actually use placeholder regions for trait method late bound regions in `collect_return_position_impl_trait_in_trait_tys`)
- #133512 (Add `as_array` and `as_mut_array` conversion methods to slices.)
- #133519 (Check `xform_ret_ty` for WF in the new solver to improve method winnowing)
- #133520 (Structurally resolve before applying projection in borrowck)
- #133534 (extend group-forbid-always-trumps-cli test)
- #133537 ([rustdoc] Fix new clippy lints)
- #133543 ([AIX] create shim for lgammaf_r)
- #133547 (rustc_span: Replace a `HashMap<_, ()>` with `HashSet`)
- #133550 (print generated doc paths)
r? `@ghost`
`@rustbot` modify labels: rollup
Structurally resolve before applying projection in borrowck
As far as I can tell, all other `.normalize` calls in borrowck are noops and can remain that way. This is the only one that actually requires structurally resolving the type.
r? lcnr
Check `xform_ret_ty` for WF in the new solver to improve method winnowing
This is a bit interesting. Method probing in the old solver is stronger than the new solver because eagerly normalizing types causes us to check their corresponding trait goals. This is important because we don't end up checking all of the where clauses of a method when method probing; just the where clauses of the impl. i.e., for:
```
impl Foo
where
WC1,
{
fn method()
where
WC2,
{}
}
```
We only check WC1 and not WC2. This is because at this point in probing the method is instantiated w/ infer vars, and checking the where clauses in WC2 will lead to cycles if we were to check them (at least that's my understanding; I could investigate changing that in general, incl. in the old solver, but I don't have much confidence that it won't lead to really bad overflows.)
This PR chooses to emulate the old solver by just checking that the return type is WF. This is theoretically stronger, but I'm not too worried about it. I think we alternatively have several approaches we can take here, though this one seems the simplest. Thoughts?
r? lcnr
Actually use placeholder regions for trait method late bound regions in `collect_return_position_impl_trait_in_trait_tys`
So in https://github.com/rust-lang/rust/pull/113182, I introduced a "diagnostics improvement" in the form of 473c88dfb6, which changes which signature we end up instantiating with placeholder regions and which signature we end up instantiating with fresh region vars so that we have placeholders corresponding to the names of the late-bound regions coming from the *impl*.
However, this is not sound, since now we're essentially no longer proving that *all* instantiations of the trait method are compatible with an instantiation of the impl method, but vice versa (which is weaker). Let's look at the example `tests/ui/impl-trait/in-trait/do-not-imply-from-trait-impl.rs`:
```rust
trait MkStatic {
fn mk_static(self) -> &'static str;
}
impl MkStatic for &'static str {
fn mk_static(self) -> &'static str { self }
}
trait Foo {
fn foo<'a: 'static, 'late>(&'late self) -> impl MkStatic;
}
impl Foo for str {
fn foo<'a: 'static>(&'a self) -> impl MkStatic + 'static {
self
}
}
fn call_foo<T: Foo + ?Sized>(t: &T) -> &'static str {
t.foo().mk_static()
}
fn main() {
let s = call_foo(String::from("hello, world").as_str());
println!("> {s}");
}
```
To collect RPITITs, we were previously instantiating the trait signature with infer vars (`fn(&'?0 str) -> ?1t` where `?1t` is the variable we use to infer the RPITIT) and the impl signature with placeholders (there are no late-bound regions in that signature, so we just have `fn(&'a str) -> Opaque`).
Equating the signatures works, since all we do is unify `?1t` with `Opaque` and `'?0` with `'a`. However, conceptually it *shouldn't* hold, since this definition is not valid for *all* instantiations of the trait method but just the one where `'0` (i.e. `'late`) is equal to `'a` :(
## So what
This PR effectively reverts 473c88dfb6 to fix the unsoundness.
Fixes#133427
Also fixes#133425, which is actually coincidentally another instance of this bug (but not one that is weaponized into UB, just one that causes an ICE in refinement checking).
Delay a bug when encountering an impl with unconstrained generics in `codegen_select`
Despite its name, `codegen_select` is what powers `Instance::try_resolve`, which is used in pre-codegen contexts to try to resolve a method where possible. One place that it's used is in the "recursion MIR lint" that detects recursive MIR bodies.
If we encounter an impl in `codegen_select` that contains unconstrained generic parameters, we expect that impl to caused an error to be reported; however, there's no temporal guarantee that this error is reported *before* we call `codegen_select`. This is what a delayed bug is *for*, and this PR makes us use a delayed bug rather than asserting something about errors already having been emitted.
Fixes #126646
Rollup of 5 pull requests
Successful merges:
- #132410 (Some more refactorings towards removing driver queries)
- #133418 (coverage: Store coverage source regions as `Span` until codegen)
- #133498 (Add missing code examples on `LocalKey`)
- #133518 (Structurally resolve before checking `!` in HIR typeck)
- #133521 (Structurally resolve before matching on type of projection)
r? `@ghost`
`@rustbot` modify labels: rollup
Structurally resolve before matching on type of projection
Another missing structural resolve in closure upvar analysis. I think it's better to place the normalization here rather than trying to guarantee that all types returned by the expr use visitor are structurally normalized, which I don't think we do now. Thoughts?
r? lcnr
coverage: Store coverage source regions as `Span` until codegen
Historically, coverage spans were converted into line/column coordinates during the MIR instrumentation pass.
This PR moves that conversion step into codegen, so that coverage spans spend most of their time stored as `Span` instead.
In addition to being conceptually nicer, this also reduces the size of coverage mappings in MIR, because `Span` is smaller than 4x u32.
---
There should be no changes to coverage output.
Some more refactorings towards removing driver queries
Follow up to https://github.com/rust-lang/rust/pull/127184
## Custom driver breaking change
The `after_analysis` callback is changed to accept `TyCtxt` instead of `Queries`. The only safe query in `Queries` to call at this point is `global_ctxt()` which allows you to enter the `TyCtxt` either way. To fix your custom driver, replace the `queries: &'tcx Queries<'tcx>` argument with `tcx: TyCtxt<'tcx>` and remove your `queries.global_ctxt().unwrap().enter(|tcx| { ... })` call and only keep the contents of the closure.
## Custom driver deprecation
The `after_crate_root_parsing` callback is now deprecated. Several custom drivers are incorrectly calling `queries.global_ctxt()` from inside of it, which causes some driver code to be skipped. As such I would like to either remove it in the future or if custom drivers still need it, change it to accept an `&rustc_ast::Crate` instead.
Recover some lost performence from #132732
This PR reorders some conditions in the `dangling_pointers_from_temporaries` lint to avoid some potentially expensive query call, in particular those who could involve some metadata decoding from disk.
cc https://github.com/rust-lang/rust/pull/132732#issuecomment-2499990683
cc `@Kobzol`
Some minor dyn-related tweaks
Each commit should be self-explanatory, but I'm happy to explain what's going on if not. These are tweaks I pulled out of #133388, but they can be reviewed sooner than that.
r? types
Allow injecting a profiler runtime into `#![no_core]` crates
An alternative to #133300, allowing `-Cinstrument-coverage` to be used with `-Zbuild-std`.
The incompatibility between `profiler_builtins` and `#![no_core]` crates appears to have been caused by profiler_builtins depending on core, and therefore conflicting with core (or minicore).
But that's a false dependency, because the profiler doesn't contain any actual Rust code. So we can just mark the profiler itself as `#![no_core]`, and remove the incompatibility error.
---
For context, the error was originally added by #79958.
do not constrain infer vars in `find_best_leaf_obligation`
This ended up causing an ICE by making the following code path reachable by incorrectly constraining an inference variable while computing the best obligation for a preceding ambiguity. Closes#129444.
f2abf827c1/compiler/rustc_trait_selection/src/solve/fulfill.rs (L312-L314)
I have to be honest, I don't fully understand how that change removes all the additional diagnostics :3
r? `@compiler-errors`
Use edition of `macro_rules` when compiling the macro
This changes the edition assigned to a macro_rules macro when it is compiled to use the edition of where the macro came from instead of the local crate's edition.
This fixes a problem when a macro_rules macro is created by a proc-macro. Previously that macro would be tagged with the local edition, which would cause problems with using the correct edition behavior inside the macro. For example, the check for unsafe attributes would cause errors in 2024 when using proc-macros from older editions.
This is partially related to https://github.com/rust-lang/rust/issues/132906. Unfortunately this is only a half fix for that issue. It fixes the error that happens in 2024, but does not fix the lint firing in 2021. I'm still trying to think of some way to fix that, but I'm running low on ideas.
Revert diagnostics hack to fix ICE 132920
This reverts 8a568d9f15 from #128849 to fix the diagnostics ICE in #132920.
The hack mentioned in that commit was supposed to be tailored to E277, but that codepath is used actually shared with other errors, e.g. at least the E283 from the linked issue.
We may have to eat the slightly worse diagnostics until a non-hacky way to make this error less verbose is implemented (or I guess a different hack specializing even more to E277's structure).
Sorry ``@estebank`` 🙏. I can close this if you'd prefer to fix it in a different way.
Since it seems unexpected that #128849 would impact the repro, here's how the error used to look before that PR.
```console
warning: unused import: `minirapier::Ray`
--> src/main.rs:2:5
|
2 | use minirapier::Ray;
| ^^^^^^^^^^^^^^^
|
= note: `#[warn(unused_imports)]` on by default
error[E0283]: type annotations needed
--> src/main.rs:10:5
|
10 | insert_resource(Res.into());
| ^^^^^^^^^^^^^^^ ---------- type must be known at this point
| |
| cannot infer type of the type parameter `R` declared on the function `insert_resource`
|
= note: cannot satisfy `_: Resource`
= help: the trait `Resource` is implemented for `Res`
note: required by a bound in `insert_resource`
--> src/main.rs:4:23
|
4 | fn insert_resource<R: Resource>(_resource: R) {}
| ^^^^^^^^ required by this bound in `insert_resource`
help: consider specifying the generic argument
|
10 | insert_resource::<R>(Res.into());
| +++++
help: consider removing this method call, as the receiver has type `Res` and `Res: Resource` trivially holds
|
10 - insert_resource(Res.into());
10 + insert_resource(Res);
```
And how it looks now without the ICE.
```console
warning: unused import: `minirapier::Ray`
--> src/main.rs:2:5
|
2 | use minirapier::Ray;
| ^^^^^^^^^^^^^^^
|
= note: `#[warn(unused_imports)]` on by default
error[E0283]: type annotations needed
--> src/main.rs:10:5
|
10 | insert_resource(Res.into());
| ^^^^^^^^^^^^^^^ ---------- type must be known at this point
| |
| cannot infer type of the type parameter `R` declared on the function `insert_resource`
|
= note: cannot satisfy `_: Resource`
note: there are multiple different versions of crate `minibevy` in the dependency graph
--> /home/lqd/rust/tmp/minimization/issue-132920/rustc-ice-version-conflict/minibevy_b/src/lib.rs:1:1
|
1 | pub trait Resource {}
| ^^^^^^^^^^^^^^^^^^ this is the required trait
|
::: src/main.rs:1:5
|
1 | use minibevy::Resource;
| -------- one version of crate `minibevy` is used here, as a direct dependency of the current crate
2 | use minirapier::Ray;
| ---------- one version of crate `minibevy` is used here, as a dependency of crate `minirapier`
|
::: /home/lqd/rust/tmp/minimization/issue-132920/rustc-ice-version-conflict/minibevy_a/src/lib.rs:1:1
|
1 | pub trait Resource {}
| ------------------ this is the found trait
= help: you can use `cargo tree` to explore your dependency tree
note: required by a bound in `insert_resource`
--> src/main.rs:4:23
|
4 | fn insert_resource<R: Resource>(_resource: R) {}
| ^^^^^^^^ required by this bound in `insert_resource`
help: consider specifying the generic argument
|
10 | insert_resource::<R>(Res.into());
| +++++
help: consider removing this method call, as the receiver has type `Res` and `Res: Resource` trivially holds
|
10 - insert_resource(Res.into());
10 + insert_resource(Res);
|
```
The improvements from #128849 are still present and the note about the trait coming from the 2 versions of bevy is more explanatory/helpful than before, albeit a bit verbosely.
Fixes#132920.
Remove -Zfuel.
I'm not sure this feature is used. I only found 2 references in a google search, both referring to its introduction.
Meanwhile, it's a global mutable state, untracked by incremental compilation, so incompatible with it.
Bail on more errors in dyn ty lowering
If we have more than one principal trait, or if we have a principal trait with errors in it, then bail with `TyKind::Error` rather than attempting lowering. Lowering a dyn trait with more than one principal just arbitrarily chooses the first one and drops the subsequent ones, and lowering a dyn trait path with errors in it is just kinda useless.
This suppresses unnecessary errors which I think is net-good, but also is important to make sure that we don't end up leaking `{type error}` in https://github.com/rust-lang/rust/issues/133388 error messaging :)
r? types
Simplify array length mismatch error reporting (to not try to turn consts into target usizes)
This changes `TypeError::FixedArrayLen` to use `ExpectedFound<ty::Const<'tcx>>` (instead of `ExpectedFound<u64>`), and renames it to `TypeError::ArrayLen`. This allows us to avoid a `try_to_target_usize` call in the type relation, which ICEs when we have a scalar of the wrong bit length (i.e. u8).
This also makes `structurally_relate_tys` to always use this type error kind any time we have a const mismatch resulting from relating the array-len part of `[T; N]`.
This has the effect of changing the error message we issue for array length mismatches involving non-valtree consts. I actually quite like the change, though, since before:
```
LL | fn test<const N: usize, const M: usize>() -> [u8; M] {
| ------- expected `[u8; M]` because of return type
LL | [0; N]
| ^^^^^^ expected `M`, found `N`
|
= note: expected array `[u8; M]`
found array `[u8; N]`
```
and after, which I think is far less verbose:
```
LL | fn test<const N: usize, const M: usize>() -> [u8; M] {
| ------- expected `[u8; M]` because of return type
LL | [0; N]
| ^^^^^^ expected an array with a size of M, found one with a size of N
```
The only questions I have are:
1. Should we do something about backticks here? Right now we don't backtick either fully evaluated consts like `2`, or rigid consts like `Foo::BAR`.... but maybe we should? It seems kinda verbose to do for numbers -- maybe we could intercept those specifically.
2. I guess we may still run the risk of leaking unevaluated consts into error reporting like `2 + 1`...?
r? ``@BoxyUwU``
Fixes#126359Fixes#131101
