Add a default implementation for CodegenBackend::link
As a side effect this should add raw-dylib support to cg_gcc as the default ArchiveBuilderBuilder that is used implements create_dll_import_lib. I haven't tested if the raw-dylib support actually works however.
Ensure that tail expr receive lifetime extension
cc `@jieyouxu` `@traviscross`
It just came to me that we should add a test to make sure that we honor the contract from the temporary lifetime rule #121346. We should continue to implement this rule in Edition 2021 onward and shorter tail expression lifetime should not override it.
This is a small PR to improve our assurance and establish a stronger contract.
Tracked by rust-lang/rust#123739
Stabilize WebAssembly `multivalue`, `reference-types`, and `tail-call` target features
For the `multivalue` and `reference-types` features this commit is
similar to https://github.com/rust-lang/rust/pull/117457 in that it's stabilizing target features specific to
WebAssembly targets. The previous PR left out these two features because
they weren't expected to change much about compiled code so it was
unclear what the rationale was. It has [since been discovered][blog]
that `reference-types` can be useful as it changes the binary format of
the `call_indirect` instruction. Additionally [on Zulip][zulip] there's
a use case of detecting these features at compile time and generating a
compile error to better warn users about features not supported on
engines.
This PR then additionally adds the `tail-call` feature which corresponds
to the [tail-call] proposal to WebAssembly. This feature advanced to
"phase 4" in the WebAssembly CG awhile back and has been supported in
LLVM for quite some time now. Engines are finishing up implementations
or have already shipped implementations, so while this is a bit of a
late addition to Rust itself it reflects the current status of
WebAssembly's state of the feature.
A test has been added here not only for these features but other
WebAssembly features as well to showcase that they're usable without
feature gates in stable Rust.
[blog]: https://blog.rust-lang.org/2024/09/24/webassembly-targets-change-in-default-target-features.html
[zulip]: https://rust-lang.zulipchat.com/#narrow/stream/122651-general/topic/wasm32.20reference-types.20.2F.20multivalue.20in.201.2E82-beta.20not.20enabled/near/473893987
[tail-call]: https://github.com/webassembly/tail-call
Prefer `pub(super)` in `unreachable_pub` lint suggestion
This PR updates the `unreachable_pub` lint suggestion to prefer `pub(super)` instead of `pub(crate)` when possible.
cc `@petrochenkov`
r? `@nnethercote`
Stabilize Arm64EC inline assembly
This stabilizes inline assembly for Arm64EC ("Emulation Compatible").
Corresponding reference PR: https://github.com/rust-lang/reference/pull/1653
---
From the requirements of stabilization mentioned in https://github.com/rust-lang/rust/issues/93335
> Each architecture needs to be reviewed before stabilization:
> - It must have clobber_abi.
Done in https://github.com/rust-lang/rust/pull/131332.
> - It must be possible to clobber every register that is normally clobbered by a function call.
This is possible from the time of the initial implementation.
> - Generally review that the exposed register classes make sense.
The registers available in this target are a subset of those available in the AArch64 inline assembly which is already stable.
The following registers cannot be used in Arm64EC compared to AArch64:
- `x13`, `x14`, `x23`, `x24`, `x28` (register class: `reg`)
- `v[16-31]` (register class: `vreg`)
- `p[0-15]`, `ffr` (clobber-only register class `preg`)
These are disallowed by the ABI (see also [abi docs](https://learn.microsoft.com/en-us/cpp/build/arm64ec-windows-abi-conventions?view=msvc-170#register-mapping) for `reg`/`vreg` and https://github.com/rust-lang/rust/pull/131332#issuecomment-2401189142 for `preg`).
Although not listed in the above requirements, preserves_flags is also implemented and the same as AArch64.
---
cc `@dpaoliello`
r? `@Amanieu`
`@rustbot` label O-windows O-AArch64 +A-inline-assembly +T-lang -T-compiler +needs-fcp
coverage: Restrict empty-span expansion to only cover `{` and `}`
Coverage instrumentation has some tricky code for converting a coverage-relevant `Span` into a set of start/end line/byte-column coordinates that will be embedded in the CGU's coverage metadata.
A big part of this complexity is special code for handling empty spans, which are expanded into non-empty spans (if possible) because LLVM's coverage reporter does not handle empty spans well.
This PR simplifies that code by restricting it to only apply in two specific situations: when the character after the empty span is `{`, or the character before the empty span is `}`.
(As an added benefit, this means that the expanded spans no longer extend awkwardly beyond the end of a physical line, which was common under the previous implementation.)
Along the way, this PR also removes some unhelpful code for dealing with function source code spread across multiple files. Functions currently can't have coverage spans in multiple files, and if that ever changes (e.g. to properly support expansion regions) then this code will need to be completely overhauled anyway.
For the `multivalue` and `reference-types` features this commit is
similar to #117457 in that it's stabilizing target features specific to
WebAssembly targets. The previous PR left out these two features because
they weren't expected to change much about compiled code so it was
unclear what the rationale was. It has [since been discovered][blog]
that `reference-types` can be useful as it changes the binary format of
the `call_indirect` instruction. Additionally [on Zulip][zulip] there's
a use case of detecting these features at compile time and generating a
compile error to better warn users about features not supported on
engines.
This PR then additionally adds the `tail-call` feature which corresponds
to the [tail-call] proposal to WebAssembly. This feature advanced to
"phase 4" in the WebAssembly CG awhile back and has been supported in
LLVM for quite some time now. Engines are finishing up implementations
or have already shipped implementations, so while this is a bit of a
late addition to Rust itself it reflects the current status of
WebAssembly's state of the feature.
A test has been added here not only for these features but other
WebAssembly features as well to showcase that they're usable without
feature gates in stable Rust.
[blog]: https://blog.rust-lang.org/2024/09/24/webassembly-targets-change-in-default-target-features.html
[zulip]: https://rust-lang.zulipchat.com/#narrow/stream/122651-general/topic/wasm32.20reference-types.20.2F.20multivalue.20in.201.2E82-beta.20not.20enabled/near/473893987
[tail-call]: https://github.com/webassembly/tail-call
Dont suggest `use<impl Trait>` when we have an edition-2024-related borrowck issue
#131186 implements some machinery to detect in borrowck when we may have RPIT overcaptures due to edition 2024, and suggests adding `+ use<'a, T>` to go back to the edition 2021 capture rules. However, we weren't filtering out cases when there are APITs in scope.
This PR implements a more sophisticated diagnostic where we will suggest turning any APITs in scope into type parameters, and applies this to both the borrowck error note, and to the `impl_trait_overcaptures` migration lint.
cc #132809
Additional tests to ensure let is rejected during parsing
In the original stabilization PR, @ `compiler-errors` has [pointed out](https://github.com/rust-lang/rust/pull/94927#issuecomment-1165156328) that #97295 wasn't enough to address the concerns about having `let` in expressions being rejected at parsing time, instead of later.
Thankfully, since then the situation has been greatly improved by #115677. This PR adds some additional tests to `disallowed-positions.rs`, and adds two additional revisions to the "normal" case which is now given the `feature` name:
* `no_feature`: Added to incorporate `disallowed-positions-without-feature-gate.rs` into the file, reducing duplication.
* `nothing`: like feature, but all functions are cfg'd out. Ensures that the errors are really emitted during parsing.
cc tracking issue #53667
require const_impl_trait gate for all conditional and trait const calls
Alternative to https://github.com/rust-lang/rust/pull/132786.
`@compiler-errors` this is basically what I meant with my proposals. I found it's easier to express this in code than English. ;)
r? `@compiler-errors`
Stabilize s390x inline assembly
This stabilizes inline assembly for s390x (SystemZ).
Corresponding reference PR: https://github.com/rust-lang/reference/pull/1643
---
From the requirements of stabilization mentioned in https://github.com/rust-lang/rust/issues/93335
> Each architecture needs to be reviewed before stabilization:
> - It must have clobber_abi.
Done in https://github.com/rust-lang/rust/pull/130630.
> - It must be possible to clobber every register that is normally clobbered by a function call.
Done in the PR that added support for clobber_abi.
> - Generally review that the exposed register classes make sense.
The followings can be used as input/output:
- `reg` (`r[0-10]`, `r[12-14]`): General-purpose register
- `reg_addr` (`r[1-10]`, `r[12-14]`): General-purpose register except `r0` which is evaluated as zero in an address context
This class is needed because `r0`, which may be allocated when using the `reg` class, cannot be used as a register in certain contexts. This is identical to the `a` constraint in LLVM and GCC. See https://github.com/rust-lang/rust/pull/119431 for details.
- `freg` (`f[0-15]`): Floating-point register
The followings are clobber-only:
- `vreg` (`v[0-31]`): Vector register
Technically `vreg` should be able to accept `#[repr(simd)]` types as input/output if the unstable `vector` target feature added is enabled, but `core::arch` has no s390x vector type and both `#[repr(simd)]` and `core::simd` are unstable. Everything related is unstable, so the fact that this is currently a clobber-only should not be considered a stabilization blocker. (https://github.com/rust-lang/rust/issues/130869 tracks unstable stuff here)
- `areg` (`a[2-15]`): Access register
All of the above register classes except `reg_addr` are needed for `clobber_abi`.
The followings cannot be used as operands for inline asm (see also [getReservedRegs](https://github.com/llvm/llvm-project/blob/llvmorg-19.1.0/llvm/lib/Target/SystemZ/SystemZRegisterInfo.cpp#L258-L282) and [SystemZELFRegisters](https://github.com/llvm/llvm-project/blob/llvmorg-19.1.0/llvm/lib/Target/SystemZ/SystemZRegisterInfo.h#L107-L128) in LLVM):
- `r11`: frame pointer
- `r15`: stack pointer
- `a0`, `a1`: Reserved for system use
- `c[0-15]` (control register) Reserved by the kernel
Although not listed in the above requirements, `preserves_flags` is implemented in https://github.com/rust-lang/rust/pull/111331.
---
cc ``@uweigand``
r? ``@Amanieu``
``@rustbot`` label +O-SystemZ +A-inline-assembly
Emit warning when calling/declaring functions with unavailable vectors.
On some architectures, vector types may have a different ABI depending on whether the relevant target features are enabled. (The ABI when the feature is disabled is often not specified, but LLVM implements some de-facto ABI.)
As discussed in rust-lang/lang-team#235, this turns out to very easily lead to unsound code.
This commit makes it a post-monomorphization future-incompat warning to declare or call functions using those vector types in a context in which the corresponding target features are disabled, if using an ABI for which the difference is relevant. This ensures that these functions are always called with a consistent ABI.
See the [nomination comment](https://github.com/rust-lang/rust/pull/127731#issuecomment-2288558187) for more discussion.
Part of #116558
r? RalfJung
Rollup of 7 pull requests
Successful merges:
- #132341 (Reject raw lifetime followed by `'`, like regular lifetimes do)
- #132363 (Enforce that raw lifetimes must be valid raw identifiers)
- #132744 (add regression test for #90781)
- #132754 (Simplify the internal API for declaring command-line options)
- #132772 (use `download-rustc="if-unchanged"` as a global default)
- #132774 (Use lld with non-LLVM backends)
- #132799 (Make `Ty::primitive_symbol` recognize `str`)
r? `@ghost`
`@rustbot` modify labels: rollup
Make `Ty::primitive_symbol` recognize `str`
Make `Ty::primitive_symbol` recognize `str`, which makes `str` eligible for the "expected primitive, found local type" (and vice versa) [diagnostic](https://github.com/rust-lang/rust/blob/master/compiler/rustc_trait_selection/src/error_reporting/infer/mod.rs#L1430-L1437) that already exists for other primitives.
<details><summary> diagnostic difference</summary>
```rs
#[allow(non_camel_case_types)]
struct str;
fn foo() {
let _: &str = "hello";
let _: &core::primitive::str = &str;
}
```
`rustc --crate-type lib --edition 2021 a.rs`
Current nightly:
```rs
error[E0308]: mismatched types
--> a.rs:5:19
|
5 | let _: &str = "hello";
| ---- ^^^^^^^ expected `str`, found a different `str`
| |
| expected due to this
|
= note: expected reference `&str`
found reference `&'static str`
error[E0308]: mismatched types
--> a.rs:6:36
|
6 | let _: &core::primitive::str = &str;
| --------------------- ^^^^ expected `str`, found a different `str`
| |
| expected due to this
|
= note: expected reference `&str` (`str`)
found reference `&str` (`str`)
error: aborting due to 2 previous errors
For more information about this error, try `rustc --explain E0308`.
```
With this patch:
```rs
error[E0308]: mismatched types
--> a.rs:5:19
|
5 | let _: &str = "hello";
| ---- ^^^^^^^ expected `str`, found a different `str`
| |
| expected due to this
|
= note: str and `str` have similar names, but are actually distinct types
= note: str is a primitive defined by the language
note: `str` is defined in the current crate
--> a.rs:2:1
|
2 | struct str;
| ^^^^^^^^^^
error[E0308]: mismatched types
--> a.rs:6:36
|
6 | let _: &core::primitive::str = &str;
| --------------------- ^^^^ expected `str`, found a different `str`
| |
| expected due to this
|
= note: str and `str` have similar names, but are actually distinct types
= note: str is a primitive defined by the language
note: `str` is defined in the current crate
--> a.rs:2:1
|
2 | struct str;
| ^^^^^^^^^^
error: aborting due to 2 previous errors
For more information about this error, try `rustc --explain E0308`.
```
</details>
Simplify the internal API for declaring command-line options
The internal APIs for declaring command-line options are old, and intimidatingly complex. This PR replaces them with a single function that takes explicit `stability` and `kind` arguments, making it easier to see how each option is handled, and whether it is treated as stable or unstable.
We also don't appear to have any tests for the output of `rustc --help` and similar, so I've added a run-make test to verify that this PR doesn't change any output. (There is already a similar run-make test for rustdoc's help output.)
---
The librustdoc changes are simply adjusting to updated compiler APIs; no functional change intended.
---
A side-effect of these changes is that rustfmt can once again format the entirety of these option declaration lists, which it was not doing before.
Enforce that raw lifetimes must be valid raw identifiers
Make sure that the identifier part of a raw lifetime is a valid raw identifier. This precludes `'r#_` and all module segment paths for now.
I don't believe this is compelling to support. This was raised by `@ehuss` in https://github.com/rust-lang/reference/pull/1603#discussion_r1822726753 (well, specifically the `'r#_` case), but I don't see why we shouldn't just make it consistent with raw identifiers.
Reject raw lifetime followed by `'`, like regular lifetimes do
See comment. We want to reject cases like `'r#long'id`, which currently gets interpreted as a raw lifetime (`'r#long`) followed by a lifetime (`'id`). This could have alternative lexes, such as an overlong char literal (`'r#long'`) followed by an identifier (`id`). To avoid committing to this in any case, let's reject the whole thing.
`@mattheww,` is this what you were looking for in https://github.com/rust-lang/reference/pull/1603#issuecomment-2339237325? I'd say ignore the details about the specific error message (the fact that this gets reinterpreted as a char literal is 🤷), just that because this causes a lexer error we're effectively saving syntactical space like you wanted.
LLVM does not expect to ever see multiple dbg_declares for the same variable at the same
location with different values. proc-macros make it possible for arbitrary code,
including multiple calls that get inlined, to happen at any given location in the source
code. Add discriminators when that happens so these locations are different to LLVM.
This may interfere with the AddDiscriminators pass in LLVM, which is added by the
unstable flag -Zdebug-info-for-profiling.
Fixes#131944
try_question_mark_nop: update test for LLVM 20
llvm/llvm-project@dd116369f6 changes the IR of this test in a way that I don't think is bad, but needs adjusting.
r? `@nikic`
`@rustbot` label: +llvm-main
pointee_info_at: fix logic for recursing into enums
Fixes https://github.com/rust-lang/rust/issues/131834
The logic in `pointee_info_at` was likely written at a time when the null pointer optimization was the *only* enum layout optimization -- and as `Variant::Multiple` kept getting expanded, nobody noticed that the logic is now unsound.
The job of this function is to figure out whether there is a dereferenceable-or-null and aligned pointer at a given offset inside a type. So when we recurse into a multi-variant enum, we better make sure that all the other enum variants must be null! This is the part that was forgotten, and this PR adds it.
The reason this didn't explode in many ways so far is that our references only have 1 niche value (null), so it's not possible on stable to have a multi-variant enum with a dereferenceable pointer and other enum variants that are not null. But with `rustc_layout_scalar_valid_range` attributes one can force such a layout, and if `@the8472's` work on alignment niches ever lands, that will make this possible on stable.
use verbose for path separator suggestion
A single `-` of suggestion underlining that is adjacent to a much more significant `^^^` underlying of the LHS path component is hard to distinguish. IMO this presents much more cleanly when it's verbose, especially because it's a *replacment* suggestion.
r? estebank
Don't suggest `.into_iter()` on iterators
This makes the the suggestion to call `.into_iter()` only consider unsatisfied `Iterator` bounds for the receiver type itself. That way, it ignores predicates generated by trying to auto-ref the receiver (the result of which usually won't implement `Iterator`).
Fixes#127511
Unfortunately, the error in that case is still confusing: it labels `Iterator` as an unsatisfied bound because `&impl Iterator: Iterator` can't be satisfied, despite that not being required or helpful. I'd like to handle that in a separate PR. ~~I'm hoping fixing #124802 will fix it too.~~ It doesn't look connected to that issue. Still, I think it'd be clearest to visually distinguish unsatisfied predicates from different attempts at `pick_method`; I'll make a PR for that soon.
Get rid of `check_opaque_type_well_formed`
Instead, replicate it by improving the span of the opaque in `check_opaque_meets_bounds`.
This has two consequences:
1. We now prefer "concrete type differs" errors, since we'll hit those first before we check the opaque is WF.
2. Spans have gotten slightly worse.
Specifically, (2.) could be improved by adding a new obligation cause that explains that the definition's environment has stronger assumptions than the declaration.
r? lcnr
remove support for rustc_safe_intrinsic attribute; use rustc_intrinsic functions instead
This brings us one step closer towards removing support for `extern "rust-intrinsic"` blocks, in favor of `#[rustc_intrinsic]` functions.
Also move `#[rustc_intrinsic]` under the `intrinsics` feature gate, to match the `extern "rust-intrinsic"` style.
Functions currently can't have mappings in multiple files, and if that ever
changes (e.g. to properly support expansion regions), this code will need to be
completely overhauled anyway.
Initialize channel `Block`s directly on the heap
The channel's `Block::new` was causing a stack overflow because it held
32 item slots, instantiated on the stack before moving to `Box::new`.
The 32x multiplier made modestly-large item sizes untenable.
That block is now initialized directly on the heap.
Fixes#102246
try-job: test-various
core: move intrinsics.rs into intrinsics folder
This makes the rustbot notification we have set up for this folder in `triagebot.toml` actually work. Also IMO it makes more sense to have it all in one folder.
[StableMIR] API to retrieve definitions from crates
Add functions to retrieve function definitions and static items from all crates (local and external).
For external crates, we're still missing items from trait implementation and primitives.
r? ````@compiler-errors:```` Do you know what is the best way to retrieve the associated items for primitives and trait implementations for external crates? Thanks!
Add `{ignore,needs}-{rustc,std}-debug-assertions` directive support
Add `{ignore,needs}-{rustc,std}-debug-assertions` compiletest directives and retire the old `{ignore,only}-debug` directives. The old `{ignore,only}-debug` directives were ambiguous because you could have std built with debug assertions but rustc not built with debug assertions or vice versa. If we want to support the use case of controlling test run based on if rustc was built with debug assertions, then having `{ignore,only}-debug` will be very confusing.
cc ````@matthiaskrgr````
Closes#123987.
r? bootstrap (or compiler tbh)
Tweak detection of multiple crate versions to be more encompassing
Previously, we only emitted the additional context if the type was in the same crate as the trait that appeared multiple times in the dependency tree. Now, we look at all traits looking for two with the same name in different crates with the same crate number, and we are more flexible looking for the types involved. This will work even if the type that implements the wrong trait version is from a different crate entirely.
```
error[E0277]: the trait bound `CustomErrorHandler: ErrorHandler` is not satisfied because the trait comes from a different crate version
--> src/main.rs:5:17
|
5 | cnb_runtime(CustomErrorHandler {});
| ^^^^^^^^^^^^^^^^^^^^^ the trait `ErrorHandler` is not implemented for `CustomErrorHandler`
|
note: there are multiple different versions of crate `c` in the dependency graph
--> /home/gh-estebank/testcase-rustc-crate-version-mismatch/c-v0.2/src/lib.rs:1:1
|
1 | pub trait ErrorHandler {}
| ^^^^^^^^^^^^^^^^^^^^^^ this is the required trait
|
::: src/main.rs:1:5
|
1 | use b::CustomErrorHandler;
| - one version of crate `c` is used here, as a dependency of crate `b`
2 | use c::cnb_runtime;
| - one version of crate `c` is used here, as a direct dependency of the current crate
|
::: /home/gh-estebank/testcase-rustc-crate-version-mismatch/b/src/lib.rs:1:1
|
1 | pub struct CustomErrorHandler {}
| ----------------------------- this type doesn't implement the required trait
|
::: /home/gh-estebank/testcase-rustc-crate-version-mismatch/c-v0.1/src/lib.rs:1:1
|
1 | pub trait ErrorHandler {}
| ---------------------- this is the found trait
= note: two types coming from two different versions of the same crate are different types even if they look the same
= help: you can use `cargo tree` to explore your dependency tree
```
Fix#89143.
Add functions to retrieve function definitions and static items from
all crates (local and external).
For external crates, add a query to retrieve the number of defs in a
foreign crate.
Basic inline assembly support for SPARC and SPARC64
This implements asm_experimental_arch (tracking issue https://github.com/rust-lang/rust/issues/93335) for SPARC and SPARC64.
This PR includes:
- General-purpose registers `r[0-31]` (`reg` register class, LLVM/GCC constraint `r`)
Supported types: i8, i16, i32, i64 (SPARC64-only)
Aliases: `g[0-7]` (`r[0-7]`), `o[0-7]` (`r[8-15]`), `l[0-7]` (`r[16-23]`), `i[0-7]` (`r[24-31]`)
- `y` register (clobber-only, needed for clobber_abi)
- preserves_flags: Integer condition codes (`icc`, `xcc`) and floating-point condition codes (`fcc*`)
The following are *not* included:
- 64-bit integer support on SPARC-V8+'s global or out registers (`g[0-7]`, `o[0-7]`): GCC's `h` constraint (it seems that there is no corresponding constraint in LLVM?)
- Floating-point registers (LLVM/GCC constraint `e`/`f`):
I initially tried to implement this, but postponed it for now because there seemed to be several parts in LLVM that behaved differently than in the LangRef's description.
- clobber_abi: Support for floating-point registers is needed.
Refs:
- LLVM
- Reserved registers https://github.com/llvm/llvm-project/blob/llvmorg-19.1.0/llvm/lib/Target/Sparc/SparcRegisterInfo.cpp#L52
- Register definitions https://github.com/llvm/llvm-project/blob/llvmorg-19.1.0/llvm/lib/Target/Sparc/SparcRegisterInfo.td
- Supported constraints https://llvm.org/docs/LangRef.html#supported-constraint-code-list
- GCC
- Reserved registers 63b6967b06/gcc/config/sparc/sparc.h (L633-L658)
- Supported constraints https://gcc.gnu.org/onlinedocs/gcc/Machine-Constraints.html
- SPARC ISA/ABI
- (64-bit ISA) The SPARC Architecture Manual, Version 9
(32-bit ISA) The SPARC Architecture Manual, Version 8
(64-bit ABI) System V Application Binary Interface SPARC Version 9 Processor Supplement, Rev 1.35
(32-bit ABI) System V Application Binary Interface SPARC Processor Supplement, Third Edition
The above docs can be downloaded from https://sparc.org/technical-documents
- (32-bit V8+ ABI) The V8+ Technical Specification
https://temlib.org/pub/SparcStation/Standards/V8plus.pdf
cc `@thejpster` (sparc-unknown-none-elf target maintainer)
(AFAIK, other sparc/sprac64 targets don't have target maintainers)
r? `@Amanieu`
`@rustbot` label +O-SPARC +A-inline-assembly
```
error[E0277]: the trait bound `dep_2_reexport::Type: Trait` is not satisfied because the trait comes from a different crate version
--> multiple-dep-versions.rs:7:18
|
7 | do_something(Type);
| ^^^^ the trait `Trait` is not implemented for `dep_2_reexport::Type`
|
note: there are multiple different versions of crate `dependency` in the dependency graph
--> /home/gh-estebank/rust/build/x86_64-unknown-linux-gnu/test/run-make/crate-loading/rmake_out/multiple-dep-versions-1.rs:4:1
|
3 | pub struct Type(pub i32);
| --------------- this type implements the required trait
4 | pub trait Trait {
| ^^^^^^^^^^^^^^^ this is the required trait
|
::: multiple-dep-versions.rs:1:1
|
1 | extern crate dep_2_reexport;
| ---------------------------- one version of crate `dependency` is used here, as a dependency of crate `foo`
2 | extern crate dependency;
| ------------------------ one version of crate `dependency` is used here, as a direct dependency of the current crate
|
::: /home/gh-estebank/rust/build/x86_64-unknown-linux-gnu/test/run-make/crate-loading/rmake_out/multiple-dep-versions-2.rs:3:1
|
3 | pub struct Type;
| --------------- this type doesn't implement the required trait
4 | pub trait Trait {
| --------------- this is the found trait
= note: two types coming from two different versions of the same crate are different types even if they look the same
= help: you can use `cargo tree` to explore your dependency tree
```
The approach to accomplish this is a HACK, and we'd want a better way to do this. I believe that moving E0277 to be a structured diagnostic would help in that regard.
```
error[E0277]: the trait bound `dep_2_reexport::Type: Trait` is not satisfied because the trait comes from a different crate version
--> multiple-dep-versions.rs:7:18
|
7 | do_something(Type);
| ^^^^ the trait `Trait` is not implemented for `dep_2_reexport::Type`
|
note: there are multiple different versions of crate `dependency` in the dependency graph
--> /home/gh-estebank/rust/build/x86_64-unknown-linux-gnu/test/run-make/crate-loading/rmake_out/multiple-dep-versions-1.rs:4:1
|
3 | pub struct Type(pub i32);
| --------------- this type implements the required trait
4 | pub trait Trait {
| ^^^^^^^^^^^^^^^ this is the required trait
|
::: multiple-dep-versions.rs:1:1
|
1 | extern crate dep_2_reexport;
| ---------------------------- one version of crate `dependency` is used here, as a dependency of crate `foo`
2 | extern crate dependency;
| ------------------------ one version of crate `dependency` is used here, as a direct dependency of the current crate
|
::: /home/gh-estebank/rust/build/x86_64-unknown-linux-gnu/test/run-make/crate-loading/rmake_out/multiple-dep-versions-2.rs:3:1
|
3 | pub struct Type;
| --------------- this type doesn't implement the required trait
4 | pub trait Trait {
| --------------- this is the found trait
= note: two types coming from two different versions of the same crate are different types even if they look the same
= help: you can use `cargo tree` to explore your dependency tree
note: required by a bound in `do_something`
--> /home/gh-estebank/rust/build/x86_64-unknown-linux-gnu/test/run-make/crate-loading/rmake_out/multiple-dep-versions-1.rs:12:24
|
12 | pub fn do_something<X: Trait>(_: X) {}
| ^^^^^ required by this bound in `do_something`
```
Previously, we only emitted the additional context if the type was in the same crate as the trait that appeared multiple times in the dependency tree. Now, we look at all traits looking for two with the same name in different crates with the same crate number, and we are more flexible looking for the types involved. This will work even if the type that implements the wrong trait version is from a different crate entirely.
```
error[E0277]: the trait bound `CustomErrorHandler: ErrorHandler` is not satisfied
--> src/main.rs:5:17
|
5 | cnb_runtime(CustomErrorHandler {});
| ----------- ^^^^^^^^^^^^^^^^^^^^^ the trait `ErrorHandler` is not implemented for `CustomErrorHandler`
| |
| required by a bound introduced by this call
|
help: you have multiple different versions of crate `c` in your dependency graph
--> src/main.rs:1:5
|
1 | use b::CustomErrorHandler;
| ^ one version of crate `c` is used here, as a dependency of crate `b`
2 | use c::cnb_runtime;
| ^ one version of crate `c` is used here, as a direct dependency of the current crate
note: two types coming from two different versions of the same crate are different types even if they look the same
--> /home/gh-estebank/testcase-rustc-crate-version-mismatch/c-v0.2/src/lib.rs:1:1
|
1 | pub trait ErrorHandler {}
| ^^^^^^^^^^^^^^^^^^^^^^ this is the required trait
|
::: /home/gh-estebank/testcase-rustc-crate-version-mismatch/b/src/lib.rs:1:1
|
1 | pub struct CustomErrorHandler {}
| ----------------------------- this type doesn't implement the required trait
|
::: /home/gh-estebank/testcase-rustc-crate-version-mismatch/c-v0.1/src/lib.rs:1:1
|
1 | pub trait ErrorHandler {}
| ---------------------- this is the found trait
= help: you can use `cargo tree` to explore your dependency tree
note: required by a bound in `cnb_runtime`
--> /home/gh-estebank/testcase-rustc-crate-version-mismatch/c-v0.2/src/lib.rs:3:41
|
3 | pub fn cnb_runtime(_error_handler: impl ErrorHandler) {}
| ^^^^^^^^^^^^ required by this bound in `cnb_runtime`
```
Fix#89143.
The channel's `Block::new` was causing a stack overflow because it held
32 item slots, instantiated on the stack before moving to `Box::new`.
The 32x multiplier made modestly-large item sizes untenable.
That block is now initialized directly on the heap.
Fixes#102246
Remove the `wasm32-wasi` target from rustc
This commit is the final step in the journey of renaming the historical `wasm32-wasi` target in the Rust compiler to `wasm32-wasip1`. Various steps in this journey so far have been:
* 2023-04-03: rust-lang/compiler-team#607 - initial proposal for this rename
* 2024-11-27: rust-lang/compiler-team#695 - amended schedule/procedure for rename
* 2024-01-29: rust-lang/rust#120468 - initial introduction of `wasm32-wasip1`
* 2024-06-18: rust-lang/rust#126662 - warn on usage of `wasm32-wasi`
* 2024-11-08: this PR - remove the `wasm32-wasi` target
The full transition schedule is in [this comment][comment] and is summarized with:
* 2024-05-02: Rust 1.78 released with `wasm32-wasip1` target
* 2024-09-05: Rust 1.81 released warning on usage of `wasm32-wasi`
* 2025-01-09: Rust 1.84 to be released without the `wasm32-wasi` target
This means that support on stable for the replacement target of `wasm32-wasip1` has currently been available for 6 months. Users have already seen warnings on stable for 2 months about usage of `wasm32-wasi` and stable users have another 2 months of warnings before the target is removed from stable.
This commit is intended to be the final step in this transition so the source tree should no longer mention `wasm32-wasi` except in historical reference to the older name of the `wasm32-wasip1` target.
[comment]: https://github.com/rust-lang/rust/pull/120468#issuecomment-1977878747
Add a new `wide-arithmetic` feature for WebAssembly
This commit adds a new rustc target feature named `wide-arithmetic` for WebAssembly targets. This corresponds to the [wide-arithmetic] proposal for WebAssembly which adds new instructions catered towards accelerating integer arithmetic larger than 64-bits. This proposal to WebAssembly is not standard yet so this new feature is flagged as an unstable target feature. Additionally Rust's LLVM version doesn't support this new feature yet since support will first be added in LLVM 20, so the feature filtering logic for LLVM is updated to handle this.
I'll also note that I'm not currently planning to add wasm-specific intrinsics to `std::arch::wasm32` at this time. The currently proposed instructions are all accessible through `i128` or `u128`-based operations which Rust already supports, so intrinsic shouldn't be necessary to get access to these new instructions.
[wide-arithmetic]: https://github.com/WebAssembly/wide-arithmetic
add const_eval_select macro to reduce redundancy
I played around a bit with a macro to make const_eval_select invocations look a bit nicer and avoid repeating the argument lists. Here's what I got. What do you think?
I didn't apply this everywhere yet because I wanted to gather feedback first.
The second commit moves the macros from https://github.com/rust-lang/rust/pull/132542 into a more sensible place. It didn't seem worth its own PR and would conflict with this PR if done separately.
Cc ``@oli-obk`` ``@saethlin`` ``@tgross35``
try-job: dist-aarch64-msvc
Properly suggest `E::assoc` when we encounter `E::Variant::assoc`
Use the right span when encountering an enum variant followed by an associated item so we don't lose the associated item in the resulting code.
Do not suggest the thing twice, once as a removal of the associated item and a second time as a typo suggestion.
Suggest fixing typos and let bindings at the same time
Fixes#132483
Currently, a suggestion for adding a let binding won't be shown if we suggest fixing a typo. This changes that behavior to always show both, if possible. Essentially, this turns the suggestion from
```rust
error[E0425]: cannot find value `x2` in this scope
--> src/main.rs:4:5
|
4 | x2 = 2;
| ^^ help: a local variable with a similar name exists: `x1`
For more information about this error, try `rustc --explain E0425`.
```
to
```rust
error[E0425]: cannot find value `x2` in this scope
--> src/main.rs:4:5
|
4 | x2 = 2;
| ^^
|
help: a local variable with a similar name exists
|
4 | x1 = 2;
| ~~
help: you might have meant to introduce a new binding
|
4 | let x2 = 2;
| +++
For more information about this error, try `rustc --explain E0425`.
```
for the following code:
```rust
fn main() {
let x1 = 1;
x2 = 2;
}
```
The original behavior only shows the suggestion for a let binding if a typo suggestion wasn't already displayed. However, this falls apart in the cases like the one above where we have multiple similar variables. I don't think it makes sense to hide this suggestion if there's a similar variable, since that defeats the purpose of this suggestion in that case (it's meant to help those coming from languages like Python).
rustc_codegen_llvm: Add a new 'pc' option to branch-protection
Add a new 'pc' option to -Z branch-protection for aarch64 that enables the use of PC as a diversifier in PAC branch protection code.
When the pauth-lr target feature is enabled in combination with -Z branch-protection=pac-ret,pc, the new 9.5-a instructions (pacibsppc, retaasppc, etc) will be generated.
mark some target features as 'forbidden' so they cannot be (un)set with -Ctarget-feature
The context for this is https://github.com/rust-lang/rust/issues/116344: some target features change the way floats are passed between functions. Changing those target features is unsound as code compiled for the same target may now use different ABIs.
So this introduces a new concept of "forbidden" target features (on top of the existing "stable " and "unstable" categories), and makes it a hard error to (un)set such a target feature. For now, the x86 and ARM feature `soft-float` is on that list. We'll have to make some effort to collect more relevant features, and similar features from other targets, but that can happen after the basic infrastructure for this landed. (These features are being collected in https://github.com/rust-lang/rust/issues/131799.)
I've made this a warning for now to give people some time to speak up if this would break something.
MCP: https://github.com/rust-lang/compiler-team/issues/780
Remove unnecessary pub enum glob-imports from `rustc_middle::ty`
We used to have an idiom in the compiler where we'd prefix or suffix all the variants of an enum, for example `BoundRegionKind`, with something like `Br`, and then *glob-import* that enum variant directly.
`@noratrieb` brought this up, and I think that it's easier to read when we just use the normal style `EnumName::Variant`.
This PR is a bit large, but it's just naming.
The only somewhat opinionated change that this PR does is rename `BorrowKind::Imm` to `BorrowKind::Immutable` and same for the other variants. I think these enums are used sparingly enough that the extra length is fine.
r? `@noratrieb` or reassign
[rustdoc] Fix `--show-coverage` when JSON output format is used
I realized while looking on the docs.rs page of the `sysinfo` crate that the coverage numbers displayed were wrong:
I realized that it was because `--show-coverage --output-format=json` was relying on the same logic as the JSON output for the doc generation whereas it should not. I fixed it by changing the API for querying `is_json` a bit.
The underlying issue is that JSON output format is stripping reexports of items from private modules.
r? ``@notriddle``
remove support for extern-block const intrinsics
This converts all const-callable intrinsics into the "new" form of a regular `fn` with `#[rustc_intrinsic]` attribute. That simplifies some of the logic since those functions can be marked `const fn` like regular functions, so intrinsics no longer need a special case to be considered const-callable at all.
I also added a new attribute `#[rustc_const_stable_intrinsic]` to mark an intrinsic as being ready to be exposed on stable. Previously we used the `#[rustc_const_stable_indirect]` attribute for that, but that attribute had a dual role -- when used on a regular function, it is an entirely safe marker to make this function part of recursive const stability, but on an intrinsic it is a trusted marker requiring special care. It's not great for the same attribute to be sometimes fully checked and safe, and sometimes trusted and requiring special care, so I split this into two attributes.
This also fixes https://github.com/rust-lang/rust/issues/122652 by accepting intrinsics as const-stable if they have a fallback body that is recursively const-stable.
The library changes are best reviewed with whitespace hidden.
r? `@compiler-errors`
More tests for non-exhaustive C-like enums in FFI
Add a few more tests for the `improper_ctypes` lint as found with the [varnish-rs](https://github.com/gquintard/varnish-rs) project.
This follows up on #116831, fixed in #116863 by ``@workingjubilee`` - I have been seeing these fail with the bindgen-generated non-exhaustive enums inside other structs. Seems the issue does not exist in the primary branch, so this PR just makes sure more cases are covered for the future.
Support clobber_abi and vector registers (clobber-only) in PowerPC inline assembly
This supports `clobber_abi` which is one of the requirements of stabilization mentioned in #93335.
This basically does a similar thing I did in https://github.com/rust-lang/rust/pull/130630 to implement `clobber_abi` for s390x, but for powerpc/powerpc64/powerpc64le.
- This also supports vector registers (as `vreg`) as clobber-only, which need to support clobbering of them to implement `clobber_abi`.
- `vreg` should be able to accept `#[repr(simd)]` types as input/output if the unstable `altivec` target feature is enabled, but `core::arch::{powerpc,powerpc64}` vector types, `#[repr(simd)]`, and `core::simd` are all unstable, so the fact that this is currently a clobber-only should not be considered a blocker of clobber_abi implementation or stabilization. So I have not implemented it in this PR.
- See https://github.com/rust-lang/rust/pull/131551 (which is based on this PR) for a PR to implement this.
- (I'm not sticking to whether that PR should be a separate PR or part of this PR, so I can merge that PR into this PR if needed.)
Refs:
- PPC32 SysV: Section "Function Calling Sequence" in [System V Application Binary Interface PowerPC Processor Supplement](https://refspecs.linuxfoundation.org/elf/elfspec_ppc.pdf)
- PPC64 ELFv1: Section 3.2 "Function Calling Sequence" in [64-bit PowerPC ELF Application Binary Interface Supplement](https://refspecs.linuxfoundation.org/ELF/ppc64/PPC-elf64abi.html#FUNC-CALL)
- PPC64 ELFv2: Section 2.2 "Function Calling Sequence" in [64-Bit ELF V2 ABI Specification](https://openpowerfoundation.org/specifications/64bitelfabi/)
- AIX: [Register usage and conventions](https://www.ibm.com/docs/en/aix/7.3?topic=overview-register-usage-conventions), [Special registers in the PowerPC®](https://www.ibm.com/docs/en/aix/7.3?topic=overview-special-registers-in-powerpc), [AIX vector programming](https://www.ibm.com/docs/en/aix/7.3?topic=concepts-aix-vector-programming)
- Register definition in LLVM: https://github.com/llvm/llvm-project/blob/llvmorg-19.1.0/llvm/lib/Target/PowerPC/PPCRegisterInfo.td#L189
If I understand the above four ABI documentations correctly, except for the PPC32 SysV's VR (Vector Registers) and 32-bit AIX (currently not supported by rustc)'s r13, there does not appear to be important differences in terms of implementing `clobber_abi`:
- The above four ABIs are consistent about FPR (0-13: volatile, 14-31: nonvolatile), CR (0-1,5-7: volatile, 2-4: nonvolatile), XER (volatile), and CTR (volatile).
- As for GPR, only the registers we are treating as reserved are slightly different
- r0, r3-r12 are volatile
- r1(sp, reserved), r14-31 are nonvolatile
- r2(reserved) is TOC pointer in PPC64 ELF/AIX, system-reserved register in PPC32 SysV (AFAIK used as thread pointer in Linux/BSDs)
- r13(reserved for non-32-bit-AIX) is thread pointer in PPC64 ELF, small data area pointer register in PPC32 SysV, "reserved under 64-bit environment; not restored across system calls[^r13]" in AIX)
- As for FPSCR, volatile in PPC64 ELFv1/AIX, some fields are volatile only in certain situations (rest are volatile) in PPC32 SysV/PPC64 ELFv2.
- As for VR (Vector Registers), it is not mentioned in PPC32 SysV, v0-v19 are volatile in both in PPC64 ELF/AIX, v20-v31 are nonvolatile in PPC64 ELF, reserved or nonvolatile depending on the ABI ([vec-extabi vs vec-default in LLVM](https://reviews.llvm.org/D89684), we are [using vec-extabi](https://github.com/rust-lang/rust/pull/131341#discussion_r1797693299)) in AIX:
> When the default Vector enabled mode is used, these registers are reserved and must not be used.
> In the extended ABI vector enabled mode, these registers are nonvolatile and their values are preserved across function calls
I left [FIXME comment about PPC32 SysV](https://github.com/rust-lang/rust/pull/131341#discussion_r1790496095) and added ABI check for AIX.
- As for VRSAVE, it is not mentioned in PPC32 SysV, nonvolatile in PPC64 ELFv1, reserved in PPC64 ELFv2/AIX
- As for VSCR, it is not mentioned in PPC32 SysV/PPC64 ELFv1, some fields are volatile only in certain situations (rest are volatile) in PPC64 ELFv2, volatile in AIX
We are currently treating r1-r2, r13 (non-32-bit-AIX), r29-r31, LR, CTR, and VRSAVE as reserved.
We are currently not processing anything about FPSCR and VSCR, but I feel those are things that should be processed by `preserves_flags` rather than `clobber_abi` if we need to do something about them. (However, PPCRegisterInfo.td in LLVM does not seem to define anything about them.)
Replaces #111335 and #124279
cc `@ecnelises` `@bzEq` `@lu-zero`
r? `@Amanieu`
`@rustbot` label +O-PowerPC +A-inline-assembly
[^r13]: callee-saved, according to [LLVM](6a6af0246b/llvm/lib/Target/PowerPC/PPCCallingConv.td (L322)) and [GCC](a9173a50e7/gcc/config/rs6000/rs6000.h (L859)).
Suggest creating unary tuples when types don't match a trait
When you want to have a variadic function, a common workaround to implement this is to create a trait and then implement that trait for various tuples. For example in `pyo3` there exists
```rust
/// Calls the object with only positional arguments.
pub fn call1(&self, args: impl IntoPy<Py<PyTuple>>) -> PyResult<&PyAny> {
...
}
```
with various impls like
```rust
impl<A: IntoPy<PyObject> IntoPy<Py<PyAny>> for (A,)
impl<A: IntoPy<PyObject, B: IntoPy<PyObject> IntoPy<Py<PyAny>> for (A, B)
... etc
```
This means that if you want to call the method with a single item you have to create a unary tuple, like `(x,)`, rather than just `x`.
This PR implements a suggestion to do that, if applicable.
find the generic container rather than simply looking up for the assoc with const arg
Fixes#132534
This issue is caused by mismatched generic parameters. Previously, it tried to find `T` in `trait X`, but after this change, it will find `T` in `fn a`.
r? `@compiler-errors` as this assertion was introduced by you.
Use backticks instead of single quotes for library feature names in diagnostics
This PR changes the text of library feature errors for using unstable or body-unstable items. Displaying library feature names in backticks is consistent with other diagnostics (e.g. those from `rustc_passes`) and with the `reason`s on unstable attributes in the library. Additionally, this simplifies diagnostics when supporting multiple unstable attributes on items (see #131824) since `DiagSymbolList` also displays symbols using backticks.
Register `~const` preds for `Deref` adjustments in HIR typeck
This doesn't *do* anything yet, since `Deref` and `DerefMut` aren't constified, and we explicitly don't error on calling non-const trait methods in HIR yet -- presumably that will wait until std is re-constified. But I'm confident this logic is correct, and this (afaict?) is the only major hole left in enforcing `~const` in HIR typeck.
r? fee1-dead
Reduce dependence on the target name
The target name can be anything with custom target specs. Matching on fields inside the target spec is much more robust than matching on the target name.
Also remove the unused is_builtin target spec field.
This is consistent with all other diagnostics I could find containing
features and enables the use of `DiagSymbolList` for generalizing
diagnostics for unstable library features to multiple features.
Use the right span when encountering an enum variant followed by an associated item so we don't lose the associated item in the resulting code.
Do not suggest the thing twice, once as a removal of the associated item and a second time as a typo suggestion.
This commit is the final step in the journey of renaming the historical
`wasm32-wasi` target in the Rust compiler to `wasm32-wasip1`. Various
steps in this journey so far have been:
* 2023-04-03: rust-lang/compiler-team#607 - initial proposal for this rename
* 2024-11-27: rust-lang/compiler-team#695 - amended schedule/procedure for rename
* 2024-01-29: rust-lang/rust#120468 - initial introduction of `wasm32-wasip1`
* 2024-06-18: rust-lang/rust#126662 - warn on usage of `wasm32-wasi`
* 2024-11-08: this PR - remove the `wasm32-wasi` target
The full transition schedule is in [this comment][comment] and is
summarized with:
* 2024-05-02: Rust 1.78 released with `wasm32-wasip1` target
* 2024-09-05: Rust 1.81 released warning on usage of `wasm32-wasi`
* 2025-01-09: Rust 1.84 to be released without the `wasm32-wasi` target
This means that support on stable for the replacement target of
`wasm32-wasip1` has currently been available for 6 months. Users have
already seen warnings on stable for 2 months about usage of
`wasm32-wasi` and stable users have another 2 months of warnings before
the target is removed from stable.
This commit is intended to be the final step in this transition so the
source tree should no longer mention `wasm32-wasi` except in historical
reference to the older name of the `wasm32-wasip1` target.
[comment]: https://github.com/rust-lang/rust/pull/120468#issuecomment-1977878747
Rollup of 15 pull requests
Successful merges:
- #129329 (Implement `From<&mut {slice}>` for `Box/Rc/Arc<{slice}>`)
- #131377 (Add LowerExp and UpperExp implementations to NonZero)
- #132393 (Docs: added brief colon explanation)
- #132437 (coverage: Regression test for inlining into an uninstrumented crate)
- #132499 (unicode_data.rs: show command for generating file)
- #132503 (better test for const HashMap; remove const_hash leftovers)
- #132511 (stabilize const_arguments_as_str)
- #132520 (NFC add known bug nr to test)
- #132522 (make codegen help output more consistent)
- #132523 (Added regression test for generics index out of bounds)
- #132528 (Use `*_opt` typeck results fns to not ICE in fallback suggestion)
- #132537 (PassWrapper: adapt for llvm/llvm-project@5445edb5d)
- #132540 (Do not format generic consts)
- #132543 (add and update some crashtests)
- #132550 (compiler: Continue introducing rustc_abi to the compiler)
r? `@ghost`
`@rustbot` modify labels: rollup
Port most of `--print=target-cpus` to Rust
The logic and formatting needed by `--print=target-cpus` has historically been carried out in C++ code. Originally it used `printf` to write directly to the console, but later it switched over to writing to a `std::ostringstream` and then passing its buffer to a callback function pointer.
This PR replaces that C++ code with a very simple function that writes a list of CPU names to a `&RustString`, with the rest of the logic and formatting being handled by ordinary safe Rust code.
Added regression test for generics index out of bounds
Added a regression test for #117446
This ICE was fixed in Rust 1.75 but a regression test was never added.
This PR adds a UI test with a reduced version of the original bug report that does not rely on external crates.
coverage: Regression test for inlining into an uninstrumented crate
Regression test for #132395, after I was able to figure out a simple way to reproduce it. See also #132436.
In addition to confirming that there is no ICE, this test also demonstrates that the affected code is undercounted, because executing the inlined copy doesn't increment coverage counters.
Add `--print host-tuple` to print host target tuple
People often parse `-vV` output to get to the host tuple, which is annoying to do. It's easier to just get it directly.
I called it "host-tuple" instead of "host" because it's clearer that it's just the target name. I'm open to different names, but I think this one is fine.
a quick GitHub search for `'^host` reveals many instances of people doing the parsing, for example:
68e0ca57cd/README.md (L369)0e38473b0c/main.sh (L96)8a3553b865/README.md (L625)43f3ec3970/do.sh (L35)
needs a compiler FCP. I could also do an MCP but I think just an FCP here makes the most sense.
Tweak E0277 output when a candidate is available
*Follow up to #132086.*
Go from
```
error[E0277]: the trait bound `Then<Ignored<chumsky::combinator::Filter<chumsky::primitive::Any<&str, chumsky::extra::Full<EmptyErr, (), ()>>, {closure@src/main.rs:9:17: 9:27}>, char>, chumsky::combinator::Map<impl CSTParser<'a, O>, O, {closure@src/main.rs:11:24: 11:27}>, (), (), chumsky::extra::Full<EmptyErr, (), ()>>: CSTParser<'a>` is not satisfied
--> src/main.rs:7:50
|
7 | fn leaf<'a, O>(parser: impl CSTParser<'a, O>) -> impl CSTParser<'a, ()> {
| ^^^^^^^^^^^^^^^^^^^^^^ the trait `chumsky::private::ParserSealed<'_, &str, (), chumsky::extra::Full<EmptyErr, (), ()>>` is not implemented for `Then<Ignored<Filter<Any<&str, ...>, ...>, ...>, ..., ..., ..., ...>`, which is required by `Then<Ignored<chumsky::combinator::Filter<chumsky::primitive::Any<&str, chumsky::extra::Full<EmptyErr, (), ()>>, {closure@src/main.rs:9:17: 9:27}>, char>, chumsky::combinator::Map<impl CSTParser<'a, O>, O, {closure@src/main.rs:11:24: 11:27}>, (), (), chumsky::extra::Full<EmptyErr, (), ()>>: CSTParser<'a>`
|
= help: the trait `chumsky::private::ParserSealed<'_, &'a str, ((), ()), chumsky::extra::Full<EmptyErr, (), ()>>` is implemented for `Then<Ignored<chumsky::combinator::Filter<chumsky::primitive::Any<&str, chumsky::extra::Full<EmptyErr, (), ()>>, {closure@src/main.rs:9:17: 9:27}>, char>, chumsky::combinator::Map<impl CSTParser<'a, O>, O, {closure@src/main.rs:11:24: 11:27}>, (), (), chumsky::extra::Full<EmptyErr, (), ()>>`
= help: for that trait implementation, expected `((), ())`, found `()`
= note: required for `Then<Ignored<Filter<Any<&str, ...>, ...>, ...>, ..., ..., ..., ...>` to implement `Parser<'_, &str, ()>`
note: required for `Then<Ignored<Filter<Any<&str, ...>, ...>, ...>, ..., ..., ..., ...>` to implement `CSTParser<'a>`
--> src/main.rs:5:16
|
5 | impl<'a, O, T> CSTParser<'a, O> for T where T: Parser<'a, &'a str, O> {}
| ^^^^^^^^^^^^^^^^ ^ ---------------------- unsatisfied trait bound introduced here
= note: the full name for the type has been written to '/home/gh-estebank/longlong/target/debug/deps/longlong-0008f9a4f2023b08.long-type-13239977239800463552.txt'
= note: consider using `--verbose` to print the full type name to the console
= note: the full name for the type has been written to '/home/gh-estebank/longlong/target/debug/deps/longlong-0008f9a4f2023b08.long-type-13239977239800463552.txt'
= note: consider using `--verbose` to print the full type name to the console
```
to
```
error[E0277]: the trait bound `Then<Ignored<chumsky::combinator::Filter<chumsky::primitive::Any<&str, chumsky::extra::Full<EmptyErr, (), ()>>, {closure@src/main.rs:9:17: 9:27}>, char>, chumsky::combinator::Map<impl CSTParser<'a, O>, O, {closure@src/main.rs:11:24: 11:27}>, (), (), chumsky::extra::Full<EmptyErr, (), ()>>: CSTParser<'a>` is not satisfied
--> src/main.rs:7:50
|
7 | fn leaf<'a, O>(parser: impl CSTParser<'a, O>) -> impl CSTParser<'a, ()> {
| ^^^^^^^^^^^^^^^^^^^^^^ unsatisfied trait bound
...
11 | ws.then(parser.map(|_| ()))
| --------------------------- return type was inferred to be `Then<Ignored<..., ...>, ..., ..., ..., ...>` here
|
= help: the trait `ParserSealed<'_, &_, (), Full<_, _, _>>` is not implemented for `Then<Ignored<..., ...>, ..., ..., ..., ...>`
but trait `ParserSealed<'_, &'a _, ((), ()), Full<_, _, _>>` is implemented for it
= help: for that trait implementation, expected `((), ())`, found `()`
= note: required for `Then<Ignored<..., ...>, ..., ..., ..., ...>` to implement `Parser<'_, &str, ()>`
note: required for `Then<Ignored<..., ...>, ..., ..., ..., ...>` to implement `CSTParser<'a>`
--> src/main.rs:5:16
|
5 | impl<'a, O, T> CSTParser<'a, O> for T where T: Parser<'a, &'a str, O> {}
| ^^^^^^^^^^^^^^^^ ^ ---------------------- unsatisfied trait bound introduced here
= note: the full name for the type has been written to '/home/gh-estebank/longlong/target/debug/deps/longlong-df9d52be87eada65.long-type-1337037744507305372.txt'
= note: consider using `--verbose` to print the full type name to the console
```
* Remove redundant wording
* Introduce trait diff highlighting logic and use it
* Fix incorrect "long type written to path" logic (can be split off)
* Point at tail expression in more cases in E0277
* Avoid long primary span labels in E0277 by moving them to a `help`
Fix#132013.
There are individual commits that can be their own PR. If the review load is too big, happy to split them off.
rustdoc: skip stability inheritance for some item kinds
For some item kinds it's incorrect to inherit their parent's stability, because they might be accessible without referring to the parent directly -- This PR removes the stability inheritance for these items and reverts their displayed stability to that before https://github.com/rust-lang/rust/pull/130798.
Impl items, both inherent and trait impls, have a stability, but it is ignored when checking for enabled features. However, impl items are automatically unstable if they're nested inside an unstable module -- this caused the children of impl to inherit the instability and lead to https://github.com/rust-lang/rust/issues/132440.
Furthermore, for associated items only the stability of the associated item itself is checked and not that of its parent impl. This is true even for trait impls and we have [relied on this behavior in the standard library in the past](https://doc.rust-lang.org/1.37.0/std/slice/trait.SliceConcatExt.html#tymethod.concat), so these also shouldn't inherit the impl's stability.
I've also removed the stability inheritance for primitives and keywords so that viewing e.g. [the `i32` docs on `core`](https://doc.rust-lang.org/nightly/core/primitive.i32.html) will no longer show "since 1.6.0". Note that we currently don't annotate stability for the keyword docs, but if we start doing so in the future then this is probably more correct.
fixes (after backport) https://github.com/rust-lang/rust/issues/132440
Also treat `impl` definition parent as transparent regarding modules
This PR changes the `non_local_definitions` lint logic to also consider `impl` definition parent as transparent regarding modules.
See tests and explanation in the changes.
``````@rustbot`````` label +L-non_local_definitions
Fixes *(after beta-backport)* #132427
cc ``````@leighmcculloch``````
r? ``````@jieyouxu``````
Add a Few Codegen Tests
Closes#86109Closes#64219
Those issues somehow got fixed over time.
So, this PR adds a couple of codegen tests to ensure we don't regress in the future.
Do not suggest `#[derive(Copy)]` when we wanted a `!Copy` type.
Do not say "`Copy` is not implemented for `T` but `Copy` is".
Do not talk about `Trait` having no implementations when `!Trait` was desired.
```
error[E0277]: the trait bound `{gen block@$DIR/gen_block_is_coro.rs:7:5: 7:8}: Coroutine` is not satisfied
--> $DIR/gen_block_is_coro.rs:6:13
|
LL | fn foo() -> impl Coroutine<Yield = u32, Return = ()> {
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ the trait `Coroutine` is not implemented for `{gen block@$DIR/gen_block_is_coro.rs:7:5: 7:8}`
LL | gen { yield 42 }
| ---------------- return type was inferred to be `{gen block@$DIR/gen_block_is_coro.rs:7:5: 7:8}` here
```
The secondary span label is new.
When a trait is not implemented for a type, but there *is* an `impl`
for another type or different trait params, we format the output to
use highlighting in the same way that E0308 does for types.
The logic accounts for 3 cases:
- When both the type and trait in the expected predicate and the candidate are different
- When only the types are different
- When only the trait generic params are different
For each case, we use slightly different formatting and wording.
Rollup of 14 pull requests
Successful merges:
- #131829 (Remove support for `-Zprofile` (gcov-style coverage instrumentation))
- #132369 (style-guide: Only use the new binop heuristic for assignments)
- #132383 (Implement suggestion for never type fallback lints)
- #132413 (update offset_of! docs to reflect the stabilization of nesting)
- #132438 (Remove unncessary option for default rust-analyzer setting)
- #132439 (Add `f16` and `f128` to `invalid_nan_comparison`)
- #132444 (rustdoc: Directly use rustc_abi instead of reexports)
- #132445 (Cleanup attributes around unchecked shifts and unchecked negation in const)
- #132448 (Add missing backtick)
- #132450 (Show actual MIR when MIR building forgot to terminate block)
- #132451 (remove some unnecessary rustc_allow_const_fn_unstable)
- #132455 (make const_alloc_layout feature gate only about functions that are already stable)
- #132456 (Move remaining inline assembly test files into asm directory)
- #132459 (feat(byte_sub_ptr): unstably add ptr::byte_sub_ptr)
r? `@ghost`
`@rustbot` modify labels: rollup
On some architectures, vector types may have a different ABI depending
on whether the relevant target features are enabled. (The ABI when the
feature is disabled is often not specified, but LLVM implements some
de-facto ABI.)
As discussed in rust-lang/lang-team#235, this turns out to very easily
lead to unsound code.
This commit makes it a post-monomorphization future-incompat warning to
declare or call functions using those vector types in a context in which
the corresponding target features are disabled, if using an ABI for
which the difference is relevant. This ensures that these functions are
always called with a consistent ABI.
See the [nomination comment](https://github.com/rust-lang/rust/pull/127731#issuecomment-2288558187)
for more discussion.
Part of #116558
Move remaining inline assembly test files into asm directory
Before:
```
tests/assembly/asm/*
tests/assembly/asm-comments.rs
tests/codegen/asm-target-clobbers.rs
tests/codegen/asm-goto.rs
tests/codegen/asm-maybe-uninit.rs
tests/codegen/asm-msp430-clobbers.rs
tests/codegen/asm-options.rs
tests/codegen/asm-clobbers.rs
tests/codegen/asm-may_unwind.rs
tests/codegen/asm-arm64ec-clobbers.rs
tests/codegen/asm-powerpc-clobbers.rs
tests/codegen/asm-sanitize-llvm.rs
tests/codegen/asm-s390x-clobbers.rs
tests/codegen/asm-clobber_abi.rs
tests/codegen/asm-multiple-options.rs
tests/codegen/global_asm.rs
tests/codegen/global_asm_include.rs
tests/codegen/global_asm_x2.rs
tests/ui/asm/*
```
After:
```
tests/assembly/asm/*
tests/codegen/asm/*
tests/ui/asm/*
```
I moved the remaining standalone test files into the asm directory, and then either removed the "asm-" suffix or for x86-specific registers tests replaced the "asm-" suffix with the "x86-" suffix.
(Then I noticed that there is no test for clobber_abi for already stabilized aarch64, arm, riscv, and loongarch64 asm... I don't believe there is a problem like https://github.com/rust-lang/rust/pull/131332, but I plan to add tests for them later.)
r? ``@Amanieu``
``@rustbot`` label +A-inline-assembly
Add `f16` and `f128` to `invalid_nan_comparison`
Currently `f32_nan` and `f64_nan` are used to provide the `invalid_nan_comparison` lint. Since we have `f16_nan` and `f128_nan`, hook these up so the new float types get the same lints.
Implement suggestion for never type fallback lints
r? ```@WaffleLapkin```
Just opening this up for vibes; it's not done yet. I'd still like to make this suggestable in a few more cases before merge:
- [x] Try to annotate `_` -> `()`
- [x] Try to annotate local variables if they're un-annotated: `let x = ...` -> `let x: () = ...`
- [x] Try to annotate the self type of a `Trait::method()` -> `<() as Trait>::method()`.
The only other case we may want to suggest is a missing turbofish, like `f()` -> `f::<()>()`. That may be possible, but seems overly annoying.
This partly addresses https://github.com/rust-lang/rust/issues/132358; the other half of fixing that would be to make the error message a bit better, perhaps just special casing the `?` operator 🤔 I don't think I'll do that part.
Remove support for `-Zprofile` (gcov-style coverage instrumentation)
Tracking issue: #42524
MCP: https://github.com/rust-lang/compiler-team/issues/798
---
This PR removes the unstable `-Zprofile` flag, which enables ”gcov-style” coverage instrumentation, along with its associated `-Zprofile-emit` configuration flag.
(The profile flag predates and is almost entirely separate from the stable `-Cinstrument-coverage` flag.)
Notably, the `-Zprofile` flag:
- Is largely untested in-tree, having only one run-make test that does not check whether its output is correct or useful.
- Has no known maintainer.
- Has seen no push towards stabilization.
- Has at least one severe regression reported in 2022 that apparently remains unaddressed.
- #100125
- Is confusingly named, since it appears to be more about coverage than performance profiling, and has nothing to do with PGO.
- Is fundamentally limited by relying on counters auto-inserted by LLVM, with no knowledge of Rust beyond debuginfo.
