Support lint expectations for `--force-warn` lints (RFC 2383)
Rustc has a `--force-warn` flag, which overrides lint level attributes and forces the diagnostics to always be warn. This means, that for lint expectations, the diagnostic can't be suppressed as usual. This also means that the expectation would not be fulfilled, even if a lint had been triggered in the expected scope.
This PR now also tracks the expectation ID in the `ForceWarn` level. I've also made some minor adjustments, to possibly catch more bugs and make the whole implementation more robust.
This will probably conflict with https://github.com/rust-lang/rust/pull/97718. That PR should ideally be reviewed and merged first. The conflict itself will be trivial to fix.
---
r? `@wesleywiser`
cc: `@flip1995` since you've helped with the initial review and also discussed this topic with me. 🙃
Follow-up of: https://github.com/rust-lang/rust/pull/87835
Issue: https://github.com/rust-lang/rust/issues/85549
Yeah, and that's it.
Introduce allow-by-default lints for checking whether diagnostics are
written in `SessionDiagnostic`/`AddSubdiagnostic` impls and whether
diagnostics are translatable. These lints can be denied for modules once
they are fully migrated to impls and translation.
Signed-off-by: David Wood <david.wood@huawei.com>
To render the message of a Fluent attribute, the identifier of the
Fluent message must be known. `DiagnosticMessage::FluentIdentifier`
contains both the message's identifier and optionally the identifier of
an attribute. Generated constants for each attribute would therefore
need to be named uniquely (amongst all error messages) or be able to
refer to only the attribute identifier which will be combined with a
message identifier later. In this commit, the latter strategy is
implemented as part of the `Diagnostic` type's functions for adding
subdiagnostics of various kinds.
Signed-off-by: David Wood <david.wood@huawei.com>
Manual implementors of translatable diagnostics will need to call
`set_arg`, not just the derive, so make this function a bit more
ergonomic by taking `IntoDiagnosticArg` rather than
`DiagnosticArgValue`.
Signed-off-by: David Wood <david.wood@huawei.com>
Add a new derive, `#[derive(SessionSubdiagnostic)]`, which enables
deriving structs for labels, notes, helps and suggestions.
Signed-off-by: David Wood <david.wood@huawei.com>
Change `span_suggestion` (and variants) to take `impl ToString` rather
than `String` for the suggested code, as this simplifies the
requirements on the diagnostic derive.
Signed-off-by: David Wood <david.wood@huawei.com>
Remove `--extern-location` and all associated code
`--extern-location` was an experiment to investigate the best way to
generate useful diagnostics for unused dependency warnings by enabling a
build system to identify the corresponding build config.
While I did successfully use this, I've since been convinced the
alternative `--json unused-externs` mechanism is the way to go, and
there's no point in having two mechanisms with basically the same
functionality.
This effectively reverts https://github.com/rust-lang/rust/pull/72603
`--extern-location` was an experiment to investigate the best way to
generate useful diagnostics for unused dependency warnings by enabling a
build system to identify the corresponding build config.
While I did successfully use this, I've since been convinced the
alternative `--json unused-externs` mechanism is the way to go, and
there's no point in having two mechanisms with basically the same
functionality.
This effectively reverts https://github.com/rust-lang/rust/pull/72603
Extends support for generating `DiagnosticMessage::FluentIdentifier`
messages from `SessionDiagnostic` derive to `#[label]`.
Signed-off-by: David Wood <david.wood@huawei.com>
Non-subdiagnostic fields (i.e. those that don't have `#[label]`
attributes or similar and are just additional context) have to be added
as arguments for Fluent messages to refer them. This commit extends the
`SessionDiagnostic` derive to do this for all fields that do not have
attributes and introduces an `IntoDiagnosticArg` trait that is
implemented on all types that can be converted to a argument for Fluent.
Signed-off-by: David Wood <david.wood@huawei.com>
This commit updates the signatures of all diagnostic functions to accept
types that can be converted into a `DiagnosticMessage`. This enables
existing diagnostic calls to continue to work as before and Fluent
identifiers to be provided. The `SessionDiagnostic` derive just
generates normal diagnostic calls, so these APIs had to be modified to
accept Fluent identifiers.
In addition, loading of the "fallback" Fluent bundle, which contains the
built-in English messages, has been implemented.
Each diagnostic now has "arguments" which correspond to variables in the
Fluent messages (necessary to render a Fluent message) but no API for
adding arguments has been added yet. Therefore, diagnostics (that do not
require interpolation) can be converted to use Fluent identifiers and
will be output as before.
`MultiSpan` contains labels, which are more complicated with the
introduction of diagnostic translation and will use types from
`rustc_errors` - however, `rustc_errors` depends on `rustc_span` so
`rustc_span` cannot use types like `DiagnosticMessage` without
dependency cycles. Introduce a new `rustc_error_messages` crate that can
contain `DiagnosticMessage` and `MultiSpan`.
Signed-off-by: David Wood <david.wood@huawei.com>
Introduce a `DiagnosticMessage` type that will enable diagnostic
messages to be simple strings or Fluent identifiers.
`DiagnosticMessage` is now used in the implementation of the standard
`DiagnosticBuilder` APIs.
Signed-off-by: David Wood <david.wood@huawei.com>
When encountering an unsatisfied trait bound, if there are no other
suggestions, mention all the types that *do* implement that trait:
```
error[E0277]: the trait bound `f32: Foo` is not satisfied
--> $DIR/impl_wf.rs:22:6
|
LL | impl Baz<f32> for f32 { }
| ^^^^^^^^ the trait `Foo` is not implemented for `f32`
|
= help: the following other types implement trait `Foo`:
Option<T>
i32
str
note: required by a bound in `Baz`
--> $DIR/impl_wf.rs:18:31
|
LL | trait Baz<U: ?Sized> where U: Foo { }
| ^^^ required by this bound in `Baz`
```
Mention implementers of traits in `ImplObligation`s.
Do not mention other `impl`s for closures, ranges and `?`.
Improve `expect` impl and handle `#[expect(unfulfilled_lint_expectations)]` (RFC 2383)
This PR updates unstable `ExpectationIds` in stashed diagnostics and adds some asserts to ensure that the stored expectations are really empty in the end. Additionally, it handles the `#[expect(unfulfilled_lint_expectations)]` case.
According to the [Errors and lints docs](https://rustc-dev-guide.rust-lang.org/diagnostics.html#diagnostic-levels) the `error` level should only be used _"when the compiler detects a problem that makes it unable to compile the program"_. As this isn't the case with `#[expect(unfulfilled_lint_expectations)]` I decided to only create a warning. To avoid adding a new lint only for this case, I simply emit a `unfulfilled_lint_expectations` diagnostic with an additional note.
---
r? `@wesleywiser` I'm requesting a review from you since you reviewed the previous PR https://github.com/rust-lang/rust/pull/87835. You are welcome to reassign it if you're busy 🙃
rfc: [RFC-2383](https://rust-lang.github.io/rfcs/2383-lint-reasons.html)
tracking issue: https://github.com/rust-lang/rust/issues/85549
cc: `@flip1995` In case you're also interested in this :)
The only reason to use `abort_if_errors` is when the program is so broken that either:
1. later passes get confused and ICE
2. any diagnostics from later passes would be noise
This is never the case for lints, because the compiler has to be able to deal with `allow`-ed lints.
So it can continue to lint and compile even if there are lint errors.
Use smaller spans for some structured suggestions
Use more accurate suggestion spans for
* argument parse error
* fully qualified path
* missing code block type
* numeric casts
Found with https://github.com/est31/warnalyzer.
Dubious changes:
- Is anyone else using rustc_apfloat? I feel weird completely deleting
x87 support.
- Maybe some of the dead code in rustc_data_structures, in case someone
wants to use it in the future?
- Don't change rustc_serialize
I plan to scrap most of the json module in the near future (see
https://github.com/rust-lang/compiler-team/issues/418) and fixing the
tests needed more work than I expected.
TODO: check if any of the comments on the deleted code should be kept.
Change suggestion logic to filter and checking _before_ creating
specific resolution suggestion.
Assert earlier that suggestions contain code substitions to make it
easier in the future to debug invalid uses. If we find this becomes too
noisy in the wild, we can always make the emitter resilient to these
cases and remove the assertions.
Fix#78651.
This allows a build system to indicate a location in its own dependency
specification files (eg Cargo's `Cargo.toml`) which can be reported
along side any unused crate dependency.
This supports several types of location:
- 'json' - provide some json-structured data, which is included in the json diagnostics
in a `tool_metadata` field
- 'raw' - emit the provided string into the output. This also appears as a json string in
`tool_metadata`.
If no `--extern-location` is explicitly provided then a default json entry of the form
`"tool_metadata":{"name":<cratename>,"path":<cratepath>}` is emitted.
