Specialize `Vec::clone_from` for `Copy` types
This should improve performance and reduce code size.
This also improves `clone_from` for `String`, `OsString` and `PathBuf`.
Adds extensive test for all the [r]split* iterators.
Fixes size_hint upper bound for split_inclusive* iterators which was one higher than necessary for non-empty slices.
Fixes size_hint lower bound for [r]splitn* iterators when n==0, which was one too high.
Stabilize Vec<T>::shrink_to
This PR stabilizes `shrink_to` feature and closes the corresponding issue. The second point was addressed already, and no `panic!` should occur.
Closes#56431.
Hide allocator details from TryReserveError
I think there's [no need for TryReserveError to carry detailed information](https://github.com/rust-lang/rust/issues/48043#issuecomment-825139280), but I wouldn't want that issue to delay stabilization of the `try_reserve` feature.
So I'm proposing to stabilize `try_reserve` with a `TryReserveError` as an opaque structure, and if needed, expose error details later.
This PR moves the `enum` to an unstable inner `TryReserveErrorKind` that lives under a separate feature flag. `TryReserveErrorKind` could possibly be left as an implementation detail forever, and the `TryReserveError` get methods such as `allocation_size() -> Option<usize>` or `layout() -> Option<Layout>` instead, or the details could be dropped completely to make try-reserve errors just a unit struct, and thus smaller and cheaper.
Currently there is no API that allows fallible zero-allocation of a Vec.
Vec.try_reserve is not appropriate for this job since it doesn't know
whether it should zero or arbitrary uninitialized memory is fine.
Since Box currently holds most of the zeroing/uninit/slice allocation APIs
it's the best place to add yet another entry into this feature matrix.
rfc3052 followup: Remove authors field from Cargo manifests
Since RFC 3052 soft deprecated the authors field, hiding it from
crates.io, docs.rs, and making Cargo not add it by default, and it is
not generally up to date/useful information for contributors, we may as well
remove it from crates in this repo.
Recommend `swap_remove` in `Vec::remove` docs
I was able to increase the performance (by 20%!) of my project by changing a `Vec::remove` call to `Vec::swap_remove` in a hot function. I think we should explicitly put a note in the Vec::remove docs to guide people in the right direction so they don't make a similar oversight.
BTree: lazily locate leaves in rangeless iterators
BTree iterators always locate both the first and last leaf edge and often only need either one, i.e., whenever they are traversed in a single direction, like in for-loops and in the common use of `iter().next()` or `iter().next_back()` to retrieve the first or last key/value-pair (#62924). It's fairly easy to avoid because the iterators with this disadvantage already are quite separate from other iterators.
r? `@Mark-Simulacrum`
Move UnwindSafe, RefUnwindSafe, AssertUnwindSafe to core
They were previously only available in std::panic, not core::panic.
- https://doc.rust-lang.org/1.51.0/std/panic/trait.UnwindSafe.html
- https://doc.rust-lang.org/1.51.0/std/panic/trait.RefUnwindSafe.html
- https://doc.rust-lang.org/1.51.0/std/panic/struct.AssertUnwindSafe.html
Where this is relevant: trait objects! Inside a `#![no_std]` library it's otherwise impossible to have a struct holding a trait object, and at the same time can be used from downstream std crates in a way that doesn't interfere with catch_unwind.
```rust
// common library
#![no_std]
pub struct Thing {
pub(crate) x: &'static (dyn SomeTrait + Send + Sync),
}
pub(crate) trait SomeTrait {...}
```
```rust
// downstream application
fn main() {
let thing: library::Thing = ...;
let _ = std::panic::catch_unwind(|| { let _ = thing; }); // does not work :(
}
```
See a4131708e2/src/gradient.rs (L7-L15) for a real life example of needing to work around this problem. In particular that workaround would not even be viable if implementors of the trait were provided externally by a caller, as the `feature = "std"` would become non-additive in that case.
What happens without the UnwindSafe constraints:
```rust
fn main() {
let gradient = colorous::VIRIDIS;
let _ = std::panic::catch_unwind(|| { let _ = gradient; });
}
```
```console
error[E0277]: the type `(dyn colorous::gradient::EvalGradient + Send + Sync + 'static)` may contain interior mutability and a reference may not be safely transferrable across a catch_unwind boundary
--> src/main.rs:3:13
|
3 | let _ = std::panic::catch_unwind(|| { let _ = gradient; });
| ^^^^^^^^^^^^^^^^^^^^^^^^ `(dyn colorous::gradient::EvalGradient + Send + Sync + 'static)` may contain interior mutability and a reference may not be safely transferrable across a catch_unwind boundary
|
::: .rustup/toolchains/nightly-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/library/std/src/panic.rs:430:40
|
430 | pub fn catch_unwind<F: FnOnce() -> R + UnwindSafe, R>(f: F) -> Result<R> {
| ---------- required by this bound in `catch_unwind`
|
= help: within `Gradient`, the trait `RefUnwindSafe` is not implemented for `(dyn colorous::gradient::EvalGradient + Send + Sync + 'static)`
= note: required because it appears within the type `&'static (dyn colorous::gradient::EvalGradient + Send + Sync + 'static)`
= note: required because it appears within the type `Gradient`
= note: required because of the requirements on the impl of `UnwindSafe` for `&Gradient`
= note: required because it appears within the type `[closure@src/main.rs:3:38: 3:62]`
```
Track caller of Vec::remove()
`vec.remove(invalid)` doesn't print a helpful source position:
> thread 'main' panicked at 'removal index (is 99) should be < len (is 1)', **library/alloc/src/vec/mod.rs:1379:13**
Update the examples in `String` and `VecDeque::retain`
The examples added in #60396 used a "clever" post-increment hack,
unrelated to the actual point of the examples. That hack was found
[confusing] in the users forum, and #81811 already changed the `Vec`
example to use a more direct iterator. This commit changes `String` and
`VecDeque` in the same way for consistency.
[confusing]: https://users.rust-lang.org/t/help-understand-strange-expression/62858
Since RFC 3052 soft deprecated the authors field anyway, hiding it from
crates.io, docs.rs, and making Cargo not add it by default, and it is
not generally up to date/useful information, we should remove it from
crates in this repo.
Remove unsound TrustedRandomAccess implementations
Removes the implementations that depend on the user-definable trait `Copy`.
Fixes#85873 in the most straightforward way.
<hr>
_Edit:_ This PR now contains additional trait infrastructure to avoid performance regressions around in-place collect, see the discussion in this thread starting from the codegen test failure at https://github.com/rust-lang/rust/pull/85874#issuecomment-872327577.
With this PR, `TrustedRandomAccess` gains additional documentation that specifically allows for and specifies the safety conditions around subtype coercions – those coercions can happen in safe Rust code with the `Zip` API’s usage of `TrustedRandomAccess`. This PR introduces a new supertrait of `TrustedRandomAccess`(currently named `TrustedRandomAccessNoCoerce`) that _doesn’t allow_ such coercions, which means it can be still be useful for optimizing cases such as in-place collect where no iterator is handed out to a user (who could do coercions) after a `get_unchecked` call; the benefit of the supertrait is that it doesn’t come with the additional safety conditions around supertraits either, so it can be implemented for more types than `TrustedRandomAccess`.
The `TrustedRandomAccess` implementations for `vec::IntoIter`, `vec_deque::IntoIter`, and `array::IntoIter` are removed as they don’t conform with the newly documented safety conditions, this way unsoundness is removed. But this PR in turn (re-)adds a `TrustedRandomAccessNoCoerce` implementation for `vec::IntoIter` to avoid performance regressions from stable in a case of in-place collecting of `Vec`s [the above-mentioned codegen test failure]. Re-introducing the (currently nightly+beta-only) impls for `VecDeque`’s and `[T; N]`’s iterators is technically possible, but goes beyond the scope of this PR (i.e. it can happen in a future PR).
The examples added in #60396 used a "clever" post-increment hack,
unrelated to the actual point of the examples. That hack was found
[confusing] in the users forum, and #81811 already changed the `Vec`
example to use a more direct iterator. This commit changes `String` and
`VecDeque` in the same way for consistency.
[confusing]: https://users.rust-lang.org/t/help-understand-strange-expression/62858
implement fold() on array::IntoIter to improve flatten().collect() perf
With #87168 flattening `array::IntoIter`s is now `TrustedLen`, the `FromIterator` implementation for `Vec` has a specialization for `TrustedLen` iterators which uses internal iteration. This implements one of the main internal iteration methods on `array::Into` to optimize the combination of those two features.
This should address the main issue in #87411
```
# old
test vec::bench_flat_map_collect ... bench: 2,244,024 ns/iter (+/- 18,903)
# new
test vec::bench_flat_map_collect ... bench: 172,863 ns/iter (+/- 2,141)
```
Make StrSearcher behave correctly on empty needle
Fix#85462.
This will not affect ABI since the other variant of the enum is bigger.
It may break some code, but that would be very strange: usually people
don't continue after the first `Done` (or `None` for a normal iterator).
`@rustbot` label T-libs A-str A-patterns
Add support for custom allocator in `VecDeque`
This follows the [roadmap](https://github.com/rust-lang/wg-allocators/issues/7) of the allocator WG to add custom allocators to collections.
`@rustbot` modify labels: +A-allocators +T-libs
Stabilize `impl From<[(K, V); N]> for HashMap` (and friends)
In addition to allowing HashMap to participate in Into/From conversion, this adds the long-requested ability to use constructor-like syntax for initializing a HashMap:
```rust
let map = HashMap::from([
(1, 2),
(3, 4),
(5, 6)
]);
```
This addition is highly motivated by existing precedence, e.g. it is already possible to similarly construct a Vec from a fixed-size array:
```rust
let vec = Vec::from([1, 2, 3]);
```
...and it is already possible to collect a Vec of tuples into a HashMap (and vice-versa):
```rust
let vec = Vec::from([(1, 2)]);
let map: HashMap<_, _> = vec.into_iter().collect();
let vec: Vec<(_, _)> = map.into_iter().collect();
```
...and of course it is likewise possible to collect a fixed-size array of tuples into a HashMap ([but not vice-versa just yet](https://github.com/rust-lang/rust/issues/81615)):
```rust
let arr = [(1, 2)];
let map: HashMap<_, _> = std::array::IntoIter::new(arr).collect();
```
Therefore this addition seems like a no-brainer.
As for any impl, this would be insta-stable.
Document iteration order of `retain` functions
For `HashSet` and `HashMap`, this simply copies the comment from
`BinaryHeap::retain`.
For `BTreeSet` and `BTreeMap`, this adds an additional guarantee that
wasn't previously documented. I think that because these data structures
are inherently ordered and other functions guarantee ordered iteration,
it makes sense to provide this guarantee for `retain` as well.
Removes the implementations that depend on the user-definable trait `Copy`.
Only fix regressions to ensure merge in 1.55: Does not modify `vec::IntoIter`.
Add diagnostic items for Clippy
This adds a bunch of diagnostic items to `std`/`core`/`alloc` functions, structs and traits used in Clippy. The actual refactorings in Clippy to use these items will be done in a different PR in Clippy after the next sync.
This PR doesn't include all paths Clippy uses, I've only gone through the first 85 lines of Clippy's [`paths.rs`](ecf85f4bdc/clippy_utils/src/paths.rs) (after rust-lang/rust-clippy#7466) to get some feedback early on. I've also decided against adding diagnostic items to methods, as it would be nicer and more scalable to access them in a nicer fashion, like adding a `is_diagnostic_assoc_item(did, sym::Iterator, sym::map)` function or something similar (Suggested by `@camsteffen` [on Zulip](https://rust-lang.zulipchat.com/#narrow/stream/147480-t-compiler.2Fwg-diagnostics/topic/Diagnostic.20Item.20Naming.20Convention.3F/near/225024603))
There seems to be some different naming conventions when it comes to diagnostic items, some use UpperCamelCase (`BinaryHeap`) and some snake_case (`hashmap_type`). This PR uses UpperCamelCase for structs and traits and snake_case with the module name as a prefix for functions. Any feedback on is this welcome.
cc: rust-lang/rust-clippy#5393
r? `@Manishearth`
Update BTreeSet::drain_filter documentation
This commit makes the documentation of `BTreeSet::drain_filter` more
consistent with that of `BTreeMap::drain_filter` after the changes in
f0b8166870.
In particular, this explicitly documents the iteration order.
BTree: consistently avoid unwrap_unchecked in iterators
Some iterator support functions named `_unchecked` internally use `unwrap`, some use `unwrap_unchecked`. This PR tries settling on `unwrap`. #86195 went up the same road but travelled way further and doesn't seem successful.
r? `@Mark-Simulacrum`
Remove some doc aliases
As per the new doc alias policy in https://github.com/rust-lang/std-dev-guide/pull/25, this removes some controversial doc aliases:
- `malloc`, `alloc`, `realloc`, etc.
- `length` (alias for `len`)
- `delete` (alias for `remove` in collections and also file/directory deletion)
r? `@joshtriplett`
alloc: `no_global_oom_handling`: disable `new()`s, `pin()`s, etc.
They are infallible, and could not be actually used because
they will trigger an error when monomorphized, but it is better
to just remove them.
Link: https://github.com/Rust-for-Linux/linux/pull/402
Suggested-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
They are infallible, and could not be actually used because
they will trigger an error when monomorphized, but it is better
to just remove them.
Link: https://github.com/Rust-for-Linux/linux/pull/402
Suggested-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add linked list cursor end methods
I add several methods to `LinkedList::CursorMut` and `LinkedList::Cursor`. These methods allow you to access/manipulate the ends of a list via the cursor. This is especially helpful when scanning through a list and reordering. For example:
```rust
let mut c = ll.back_cursor_mut();
let mut moves = 10;
while c.current().map(|x| x > 5).unwrap_or(false) {
let n = c.remove_current();
c.push_front(n);
if moves > 0 { break; } else { moves -= 1; }
}
```
I encountered this problem working on my bachelors thesis doing graph index manipulation.
While this problem can be avoided by splicing, it is awkward. I asked about the problem [here](https://internals.rust-lang.org/t/linked-list-cursurmut-missing-methods/14921/4) and it was suggested I write a PR.
All methods added consist of
```rust
Cursor::front(&self) -> Option<&T>;
Cursor::back(&self) -> Option<&T>;
CursorMut::front(&self) -> Option<&T>;
CursorMut::back(&self) -> Option<&T>;
CursorMut::front_mut(&mut self) -> Option<&mut T>;
CursorMut::back_mut(&mut self) -> Option<&mut T>;
CursorMut::push_front(&mut self, elt: T);
CursorMut::push_back(&mut self, elt: T);
CursorMut::pop_front(&mut self) -> Option<T>;
CursorMut::pop_back(&mut self) -> Option<T>;
```
#### Design decisions:
I tried to remain as consistent as possible with what was already present for linked lists.
The methods `front`, `front_mut`, `back` and `back_mut` are identical to their `LinkedList` equivalents.
I tried to make the `pop_front` and `pop_back` methods work the same way (vis a vis the "ghost" node) as `remove_current`. I thought this was the closest analog.
`push_front` and `push_back` do not change the "current" node, even if it is the "ghost" node. I thought it was most intuitive to say that if you add to the list, current will never change.
Any feedback would be welcome 😄
For `HashSet` and `HashMap`, this simply copies the comment from
`BinaryHeap::retain`.
For `BTreeSet` and `BTreeMap`, this adds an additional guarantee that
wasn't previously documented. I think that because these data structures
are inherently ordered and other functions guarantee ordered iteration,
it makes sense to provide this guarantee for `retain` as well.
This commit makes the documentation of `BTreeSet::drain_filter` more
consistent with that of `BTreeMap::drain_filter` after the changes in
f0b8166870.
In particular, this explicitly documents the iteration order.
Use HTTPS links where possible
While looking at #86583, I wondered how many other (insecure) HTTP links were in `rustc`. This changes most other `http` links to `https`. While most of the links are in comments or documentation, there are a few other HTTP links that are used by CI that are changed to HTTPS.
Notes:
- I didn't change any to or in licences
- Some links don't support HTTPS :(
- Some `http` links were dead, in those cases I upgraded them to their new places (all of which used HTTPS)
Iterators contain arbitrary code which may panic. Unsafe code has to be
careful to do its state updates at the right point between calls
that may panic.
BTree: encapsulate LeafRange better & some debug asserts
Looking at iterators again, I think #81937 didn't house enough code in `LeafRange`. Moving the API boundary a little makes things more local in navigate.rs and less complicated in map.rs.
r? `@Mark-Simulacrum`
Use `copy_nonoverlapping` to copy `bytes` in `String::insert_bytes`
The second copy could be made using `ptr::copy_nonoverlapping` instead of `ptr::copy`, since aliasing won't allow `self` and `bytes` to overlap. LLVM even seems to recognize this, [replacing the second `memmove` with a `memcopy`](https://rust.godbolt.org/z/Yoaa6rrGn), so this makes it so it's always applied.
Remove methods under Implementors on trait pages
As discussed at https://github.com/rust-lang/rust/issues/84326#issuecomment-842652412.
On a trait page, the "Implementors" section currently lists all methods of each implementor. That duplicates the method definitions on the trait itself, and is usually not very useful. So the implementors are collapsed by default. This PR changes rustdoc to just not render them at all. Any documentation specific to an implementor can be found by clicking through to the implementor's page.
This moves the "portability" info inside the `<summary>` tags so it is still visible on trait pages (as originally implemented in #79201). That also means it will be visible on struct/enum pages when methods are collapsed.
Add `#[doc(hidden)]` to all implementations of `Iterator::__iterator_get_unchecked` that didn't already have it. Otherwise, due to #86145, the structs/enums with those implementations would generate documentation for them, and that documentation would have a broken link into the Iterator page. Those links were already "broken" but not detected by the link-checker, because they pointed to one of the Implementors on the Iterator page, which happened to have the right anchor name.
This reduces the Read trait's page size from 128kB to 68kB (uncompressed) and from 12,125 bytes to 9,989 bytes (gzipped
Demo:
https://hoffman-andrews.com/rust/remove-methods-implementors/std/string/struct.String.html#trait-implementationshttps://hoffman-andrews.com/rust/remove-methods-implementors/std/io/trait.Read.html#implementors
r? `@GuillaumeGomez`
This method on the Iterator trait is doc(hidden), and about half of
implementations were doc(hidden). This adds the attribute to the
remaining implementations.
Mention the `Borrow` guarantee on the `Hash` implementations for Arrays and `Vec`
To remind people like me who forget about it and send PRs to make them different, and to (probably) get a test failure if the code is changed to no longer uphold it.
To remind people like me who forget about it and send PRs to make them different, and to (probably) get a test failure if the code is changed to no longer uphold it.
String::remove_matches O(n^2) -> O(n)
Copy only non-matching bytes. Replace collection of matches into a
vector with iteration over rejections, exploiting the guarantee that we
mutate parts of the haystack that have already been searched over.
r? `@joshtriplett`
Update standard library for IntoIterator implementation of arrays
This PR partially resolves issue #84513 of updating the standard library part.
I haven't found any remaining doctest examples which are using iterators over e.g. &i32 instead of just i32 in the standard library. Can anyone point me to them if there's remaining any?
Thanks!
r? ```@m-ou-se```
## User-facing changes
- Intra-doc links to primitives that currently go to rust-lang.org/nightly/std/primitive.x.html will start going to channel that rustdoc was built with. Nightly will continue going to /nightly; Beta will link to /beta; stable compilers will link to /1.52.1 (or whatever version they were built as).
- Cross-crate links from std to core currently go to /nightly unconditionally. They will start going to /1.52.0 on stable channels (but remain the same on nightly channels).
- Intra-crate links from std to std (or core to core) currently go to the same URL they are hosted at; they will continue to do so. Notably, this is different from everything else because it can preserve the distinction between /stable and /1.52.0 by using relative links.
Note that "links" includes both intra-doc links and rustdoc's own
automatically generated hyperlinks.
## Implementation changes
- Update the testsuite to allow linking to /beta and /1.52.1 in docs
- Use an html_root_url for the standard library that's dependent on the channel
This avoids linking to nightly docs on stable.
- Update rustdoc to use channel-dependent links for primitives from an
unknown crate
- Set DOC_RUST_LANG_ORG_CHANNEL from bootstrap to ensure it's in sync
- Include doc.rust-lang.org in the channel
Add `String::extend_from_within`
This PR adds `String::extend_from_within` function under the `string_extend_from_within` feature gate similar to the [`Vec::extend_from_within`] function.
```rust
// String
pub fn extend_from_within<R>(&mut self, src: R)
where
R: RangeBounds<usize>;
```
[`Vec::extend_from_within`]: https://github.com/rust-lang/rust/issues/81656
This patch adds `String::extend_from_within` function under the
`string_extend_from_within` feature gate similar to the
`Vec::extend_from_within` function.
Enable Vec's calloc optimization for Option<NonZero>
Someone on discord noticed that `vec![None::<NonZeroU32>; N]` wasn't getting the optimization, so here's a PR 🙃
We can certainly do this in the standard library because we know for sure this is ok, but I think it's also a necessary consequence of documented guarantees like those in https://doc.rust-lang.org/std/option/#representation and https://doc.rust-lang.org/core/num/struct.NonZeroU32.html
It feels weird to do this without adding a test, but I wasn't sure where that would belong. Is it worth adding codegen tests for these?
Add `TrustedRandomAccess` specialization for `Vec::extend()`
This should do roughly the same as the `TrustedLen` specialization but result in less IR by using `__iterator_get_unchecked`
instead of `Iterator::for_each`
Conflicting specializations are manually prioritized by grouping them under yet another helper trait.
Weak's type parameter may dangle on drop
Way back in 34076bc0c9, #\[may_dangle\] was added to Rc\<T\> and Arc\<T\>'s Drop impls. That appears to have been because a test added in #28929 used Arc and Rc with dangling references at drop time. However, Weak was not covered by that test, and therefore no #\[may_dangle\] was forced to be added at the time.
As far as dropping, Weak has *even less need* to interact with the T than Rc and Arc do. Roughly speaking #\[may_dangle\] describes generic parameters that the outer type's Drop impl does not interact with except by possibly dropping them; no other interaction (such as trait method calls on the generic type) is permissible. It's clear this applies to Rc's and Arc's drop impl, which sometimes drop T but otherwise do not interact with one. It applies *even more* to Weak. Dropping a Weak cannot ever cause T's drop impl to run. Either there are strong references still in existence, in which case better not drop the T. Or there are no strong references still in existence, in which case the T would already have been dropped previously by the drop of the last strong count.
Avoid zero-length memcpy in formatting
This has two separate and somewhat orthogonal commits. The first change adjusts the ToString general impl for all types that implement Display; it no longer uses the full format machinery, rather directly falling onto a `std::fmt::Display::fmt` call. The second change directly adjusts the general core::fmt::write function which handles the production of format_args! to avoid zero-length push_str calls.
Both changes target the fact that push_str will still call memmove internally (or a similar function), as it doesn't know the length of the passed string. For zero-length strings in particular, this is quite expensive, and even for very short (several bytes long) strings, this is also expensive. Future work in this area may wish to have us fallback to write_char or similar, which may be cheaper on the (typically) short strings between the interpolated pieces in format_args!.
This also checks the contents and not only the capacity in case IntoIter's clone implementation is changed to add capacity at the end. Extra capacity at the beginning would be needed to make InPlaceIterable work.
Co-authored-by: Giacomo Stevanato <giaco.stevanato@gmail.com>
The unsoundness is not in Peekable per se, it rather is due to the
interaction between Peekable being able to hold an extra item
and vec::IntoIter's clone implementation shortening the allocation.
An alternative solution would be to change IntoIter's clone implementation
to keep enough spare capacity available.
Implement the new desugaring from `try_trait_v2`
~~Currently blocked on https://github.com/rust-lang/rust/issues/84782, which has a PR in https://github.com/rust-lang/rust/pull/84811~~ Rebased atop that fix.
`try_trait_v2` tracking issue: https://github.com/rust-lang/rust/issues/84277
Unfortunately this is already touching a ton of things, so if you have suggestions for good ways to split it up, I'd be happy to hear them. (The combination between the use in the library, the compiler changes, the corresponding diagnostic differences, even MIR tests mean that I don't really have a great plan for it other than trying to have decently-readable commits.
r? `@ghost`
~~(This probably shouldn't go in during the last week before the fork anyway.)~~ Fork happened.
This avoids a zero-length write_str call, which boils down to a zero-length
memmove and ultimately costs quite a few instructions on some workloads.
This is approximately a 0.33% instruction count win on diesel-check.
BTree: no longer copy keys and values before dropping them
When dropping BTreeMap or BTreeSet instances, keys-value pairs are up to now each copied and then dropped, at least according to source code. This is because the code for dropping and for iterators is shared.
This PR postpones the treatment of doomed key-value pairs from the intermediate functions `deallocating_next`(`_back`) to the last minute, so the we can drop the keys and values in place. According to the library/alloc benchmarks, this does make a difference, (and a positive difference with an `#[inline]` on `drop_key_val`). It does not change anything for #81444 though.
r? `@Mark-Simulacrum`
Stablize {HashMap,BTreeMap}::into_{keys,values}
I would propose to stabilize `{HashMap,BTreeMap}::into_{keys,values}`( aka. `map_into_keys_values`).
Closes#75294.
For certain sorts of systems, programming, it's deemed essential that
all allocation failures be explicitly handled where they occur. For
example, see Linus Torvald's opinion in [1]. Merely not calling global
panic handlers, or always `try_reserving` first (for vectors), is not
deemed good enough, because the mere presence of the global OOM handlers
is burdens static analysis.
One option for these projects to use rust would just be to skip `alloc`,
rolling their own allocation abstractions. But this would, in my
opinion be a real shame. `alloc` has a few `try_*` methods already, and
we could easily have more. Features like custom allocator support also
demonstrate and existing to support diverse use-cases with the same
abstractions.
A natural way to add such a feature flag would a Cargo feature, but
there are currently uncertainties around how std library crate's Cargo
features may or not be stable, so to avoid any risk of stabilizing by
mistake we are going with a more low-level "raw cfg" token, which
cannot be interacted with via Cargo alone.
Note also that since there is no notion of "default cfg tokens" outside
of Cargo features, we have to invert the condition from
`global_oom_handling` to to `not(no_global_oom_handling)`. This breaks
the monotonicity that would be important for a Cargo feature (i.e.
turning on more features should never break compatibility), but it
doesn't matter for raw cfg tokens which are not intended to be
"constraint solved" by Cargo or anything else.
To support this use-case we create a new feature, "global-oom-handling",
on by default, and put the global OOM handler infra and everything else
it that depends on it behind it. By default, nothing is changed, but
users concerned about global handling can make sure it is disabled, and
be confident that all OOM handling is local and explicit.
For this first iteration, non-flat collections are outright disabled.
`Vec` and `String` don't yet have `try_*` allocation methods, but are
kept anyways since they can be oom-safely created "from parts", and we
hope to add those `try_` methods in the future.
[1]: https://lore.kernel.org/lkml/CAHk-=wh_sNLoz84AUUzuqXEsYH35u=8HV3vK-jbRbJ_B-JjGrg@mail.gmail.com/
Replace 'NULL' with 'null'
This replaces occurrences of "NULL" with "null" in docs, comments, and compiler error/lint messages. This is for the sake of consistency, as the lowercase "null" is already the dominant form in Rust. The all-caps NULL looks like the C macro (or SQL keyword), which seems out of place in a Rust context, given that NULL does not exist in the Rust language or standard library (instead having [`ptr::null()`](https://doc.rust-lang.org/stable/std/ptr/fn.null.html)).
i8 and u8::to_string() specialisation (far less asm).
Take 2. Around 1/6th of the assembly to without specialisation.
https://godbolt.org/z/bzz8Mq
(partially fixes#73533 )
Remove slice diagnostic item
...because it is unusally placed on an impl and is redundant with a lang item.
Depends on rust-lang/rust-clippy#7074 (next clippy sync). ~I expect clippy tests to fail in the meantime.~ Nope tests passed...
CC `@flip1995`
further split up const_fn feature flag
This continues the work on splitting up `const_fn` into separate feature flags:
* `const_fn_trait_bound` for `const fn` with trait bounds
* `const_fn_unsize` for unsizing coercions in `const fn` (looks like only `dyn` unsizing is still guarded here)
I don't know if there are even any things left that `const_fn` guards... at least libcore and liballoc do not need it any more.
`@oli-obk` are you currently able to do reviews?
Remove duplicated fn(Box<[T]>) -> Vec<T>
`<[T]>::into_vec()` does the same thing as `Vec::from::<Box<[T]>>()`, so they can be implemented in terms of each other. This was the previous implementation of `Vec::from()`, but was changed in #78461. I'm not sure what the rationale was for that change, but it seems preferable to maintain a single implementation.
Replace all `fmt.pad` with `debug_struct`
This replaces any occurrence of:
- `f.pad("X")` with `f.debug_struct("X").finish()`
- `f.pad("X { .. }")` with `f.debug_struct("X").finish_non_exhaustive()`
This is in line with existing formatting code such as
1255053067/library/std/src/sync/mpsc/mod.rs (L1470-L1475)
Improve code example for length comparison
Small fix/improvement: it's much safer to check that you're under the length of an array rather than chacking that you're equal to it. It's even more true in case you update the length of the array while iterating.
Add strong_count mutation methods to Rc
The corresponding methods were stabilized on `Arc` in #79285 (tracking: #71983). This patch implements and stabilizes identical methods on the `Rc` types as well.
