There are some comments describing multiple subsequent `use` items. When
the big `use` reformatting happens some of these `use` items will be
reordered, possibly moving them away from the comment. With this
additional level of formatting it's not really feasible to have comments
of this type. This commit removes them in various ways:
- merging separate `use` items when appropriate;
- inserting blank lines between the comment and the first `use` item;
- outright deletion (for comments that are relatively low-value);
- adding a separate "top-level" comment.
We also entirely skip formatting for four library files that contain
nothing but `pub use` re-exports, where reordering would be painful.
Remove the unstable `extern "wasm"` ABI (`wasm_abi` feature tracked
in #83788).
As discussed in https://github.com/rust-lang/rust/pull/127513#issuecomment-2220410679
and following, this ABI is a failed experiment that did not end
up being used for anything. Keeping support for this ABI in LLVM 19
would require us to switch wasm targets to the `experimental-mv`
ABI, which we do not want to do.
It should be noted that `Abi::Wasm` was internally used for two
things: The `-Z wasm-c-abi=legacy` ABI that is still used by
default on some wasm targets, and the `extern "wasm"` ABI. Despite
both being `Abi::Wasm` internally, they were not the same. An
explicit `extern "wasm"` additionally enabled the `+multivalue`
feature.
I've opted to remove `Abi::Wasm` in this patch entirely, instead
of keeping it as an ABI with only internal usage. Both
`-Z wasm-c-abi` variants are now treated as part of the normal
C ABI, just with different different treatment in
adjust_for_foreign_abi.
Support tail calls in mir via `TerminatorKind::TailCall`
This is one of the interesting bits in tail call implementation — MIR support.
This adds a new `TerminatorKind` which represents a tail call:
```rust
TailCall {
func: Operand<'tcx>,
args: Vec<Operand<'tcx>>,
fn_span: Span,
},
```
*Structurally* this is very similar to a normal `Call` but is missing a few fields:
- `destination` — tail calls don't write to destination, instead they pass caller's destination to the callee (such that eventual `return` will write to the caller of the function that used tail call)
- `target` — similarly to `destination` tail calls pass the caller's return address to the callee, so there is nothing to do
- `unwind` — I _think_ this is applicable too, although it's a bit confusing
- `call_source` — `become` forbids operators and is not created as a lowering of something else; tail calls always come from HIR (at least for now)
It might be helpful to read the interpreter implementation to understand what `TailCall` means exactly, although I've tried documenting it too.
-----
There are a few `FIXME`-questions still left, ideally we'd be able to answer them during review ':)
-----
r? `@oli-obk`
cc `@scottmcm` `@DrMeepster` `@JakobDegen`
Miri function identity hack: account for possible inlining
Having a non-lifetime generic is not the only reason a function can be duplicated. Another possibility is that the function may be eligible for cross-crate inlining. So also take into account the inlining attribute in this Miri hack for function pointer identity.
That said, `cross_crate_inlinable` will still sometimes return true even for `inline(never)` functions:
- when they are `DefKind::Ctor(..) | DefKind::Closure` -- I assume those cannot be `InlineAttr::Never` anyway?
- when `cross_crate_inline_threshold == InliningThreshold::Always`
so maybe this is still not quite the right criterion to use for function pointer identity.
Most modules have such a blank line, but some don't. Inserting the blank
line makes it clearer that the `//!` comments are describing the entire
module, rather than the `use` declaration(s) that immediately follows.
smir: merge identical Constant and ConstOperand types
The first commit renames the const operand visitor functions on regular MIR to match the type name, that was forgotten in the original rename.
The second commit changes stable MIR, fixing https://github.com/rust-lang/project-stable-mir/issues/71. Previously there were two different smir types for the MIR type `ConstOperand`, one used in `Operand` and one in `VarDebugInfoContents`.
Maybe we should have done this with https://github.com/rust-lang/rust/pull/125967, so there's only a single breaking change... but I saw that PR too late.
Fixes https://github.com/rust-lang/project-stable-mir/issues/71
Rollup of 9 pull requests
Successful merges:
- #125829 (rustc_span: Add conveniences for working with span formats)
- #126361 (Unify intrinsics body handling in StableMIR)
- #126417 (Add `f16` and `f128` inline ASM support for `x86` and `x86-64`)
- #126424 ( Also sort `crt-static` in `--print target-features` output)
- #126428 (Polish `std::path::absolute` documentation.)
- #126429 (Add `f16` and `f128` const eval for binary and unary operationations)
- #126448 (End support for Python 3.8 in tidy)
- #126488 (Use `std::path::absolute` in bootstrap)
- #126511 (.mailmap: Associate both my work and my private email with me)
r? `@ghost`
`@rustbot` modify labels: rollup
Unify intrinsics body handling in StableMIR
rust-lang/rust#120675 introduced a new mechanism to declare intrinsics which will potentially replace the rust-intrinsic ABI.
The new mechanism introduces a placeholder body and mark the intrinsic with `#[rustc_intrinsic_must_be_overridden]`.
In practice, this means that a backend should not generate code for the placeholder, and shim the intrinsic.
The new annotation is an internal compiler implementation, and it doesn't need to be exposed to StableMIR users.
In this PR, we unify the interface for intrinsics marked with `rustc_intrinsic_must_be_overridden` and intrinsics that do not have a body.
Fixes https://github.com/rust-lang/project-stable-mir/issues/79
r? ``@oli-obk``
cc: ``@momvart``
Use `Variance` glob imported variants everywhere
Fully commit to using the globbed variance. Could be convinced the other way, and change this PR to not use the globbed variants anywhere, but I'd rather we do one or the other.
r? lcnr
rust-lang/rust#120675 introduced a new mechanism to declare intrinsics
which will potentially replace the rust-intrinsic ABI.
The new mechanism introduces a placeholder body and mark the intrinsic
with #[rustc_intrinsic_must_be_overridden].
In practice, this means that backends should not generate code for the
placeholder, and shim the intrinsic.
The new annotation is an internal compiler implementation,
and it doesn't need to be exposed to StableMIR users.
In this PR, intrinsics marked with `rustc_intrinsic_must_be_overridden`
are handled the same way as intrinsics that do not have a body.
We already do this for a number of crates, e.g. `rustc_middle`,
`rustc_span`, `rustc_metadata`, `rustc_span`, `rustc_errors`.
For the ones we don't, in many cases the attributes are a mess.
- There is no consistency about order of attribute kinds (e.g.
`allow`/`deny`/`feature`).
- Within attribute kind groups (e.g. the `feature` attributes),
sometimes the order is alphabetical, and sometimes there is no
particular order.
- Sometimes the attributes of a particular kind aren't even grouped
all together, e.g. there might be a `feature`, then an `allow`, then
another `feature`.
This commit extends the existing sorting to all compiler crates,
increasing consistency. If any new attribute line is added there is now
only one place it can go -- no need for arbitrary decisions.
Exceptions:
- `rustc_log`, `rustc_next_trait_solver` and `rustc_type_ir_macros`,
because they have no crate attributes.
- `rustc_codegen_gcc`, because it's quasi-external to rustc (e.g. it's
ignored in `rustfmt.toml`).
Uplift `EarlyBinder` into `rustc_type_ir`
We also need to give `EarlyBinder` a `'tcx` param, so that we can carry the `Interner` in the `EarlyBinder` too. This is necessary because otherwise we have an unconstrained `I: Interner` parameter in many of the `EarlyBinder`'s inherent impls.
I also generally think that this is desirable to have, in case we later want to track some state in the `EarlyBinder`.
r? lcnr
Refactor float `Primitive`s to a separate `Float` type
Now there are 4 of them, it makes sense to refactor `F16`, `F32`, `F64` and `F128` out of `Primitive` and into a separate `Float` type (like integers already are). This allows patterns like `F16 | F32 | F64 | F128` to be simplified into `Float(_)`, and is consistent with `ty::FloatTy`.
As a side effect, this PR also makes the `Ty::primitive_size` method work with `f16` and `f128`.
Tracking issue: #116909
`@rustbot` label +F-f16_and_f128
deref patterns: lower deref patterns to MIR
This lowers deref patterns to MIR. This is a bit tricky because this is the first kind of pattern that requires storing a value in a temporary. Thanks to https://github.com/rust-lang/rust/pull/123324 false edges are no longer a problem.
The thing I'm not confident about is the handling of fake borrows. This PR ignores any fake borrows inside a deref pattern. We are guaranteed to at least fake borrow the place of the first pointer value, which could be enough, but I'm not certain.
Add simple async drop glue generation
This is a prototype of the async drop glue generation for some simple types. Async drop glue is intended to behave very similar to the regular drop glue except for being asynchronous. Currently it does not execute synchronous drops but only calls user implementations of `AsyncDrop::async_drop` associative function and awaits the returned future. It is not complete as it only recurses into arrays, slices, tuples, and structs and does not have same sensible restrictions as the old `Drop` trait implementation like having the same bounds as the type definition, while code assumes their existence (requires a future work).
This current design uses a workaround as it does not create any custom async destructor state machine types for ADTs, but instead uses types defined in the std library called future combinators (deferred_async_drop, chain, ready_unit).
Also I recommend reading my [explainer](https://zetanumbers.github.io/book/async-drop-design.html).
This is a part of the [MCP: Low level components for async drop](https://github.com/rust-lang/compiler-team/issues/727) work.
Feature completeness:
- [x] `AsyncDrop` trait
- [ ] `async_drop_in_place_raw`/async drop glue generation support for
- [x] Trivially destructible types (integers, bools, floats, string slices, pointers, references, etc.)
- [x] Arrays and slices (array pointer is unsized into slice pointer)
- [x] ADTs (enums, structs, unions)
- [x] tuple-like types (tuples, closures)
- [ ] Dynamic types (`dyn Trait`, see explainer's [proposed design](https://github.com/zetanumbers/posts/blob/main/async-drop-design.md#async-drop-glue-for-dyn-trait))
- [ ] coroutines (https://github.com/rust-lang/rust/pull/123948)
- [x] Async drop glue includes sync drop glue code
- [x] Cleanup branch generation for `async_drop_in_place_raw`
- [ ] Union rejects non-trivially async destructible fields
- [ ] `AsyncDrop` implementation requires same bounds as type definition
- [ ] Skip trivially destructible fields (optimization)
- [ ] New [`TyKind::AdtAsyncDestructor`](https://github.com/zetanumbers/posts/blob/main/async-drop-design.md#adt-async-destructor-types) and get rid of combinators
- [ ] [Synchronously undroppable types](https://github.com/zetanumbers/posts/blob/main/async-drop-design.md#exclusively-async-drop)
- [ ] Automatic async drop at the end of the scope in async context
