CFI: Strip auto traits off Virtual calls
We already use `Instance` at declaration sites when available to glean additional information about possible abstractions of the type in use. This does the same when possible at callsites as well.
The primary purpose of this change is to allow CFI to alter how it generates type information for indirect calls through `Virtual` instances.
This is needed for the "separate machinery" version of my approach to the vtable issues (#122573), because we need to respond differently to a `Virtual` call to the same type as a non-virtual call, specifically [stripping auto traits off the receiver's `Self`](54b15b0c36) because there isn't a separate vtable for `Foo` vs `Foo + Send`.
This would also make a more general underlying mechanism that could be used by rcvalle's [proposed drop detection / encoding](edcd1e20a1) if we end up using his approach, as we could condition out on the `def_id` in the CFI code rather than requiring the generating code to explicitly note whether it was calling drop.
CFI: Support self_cell-like recursion
Current `transform_ty` attempts to avoid cycles when normalizing `#[repr(transparent)]` types to their interior, but runs afoul of this pattern used in `self_cell`:
```
struct X<T> {
x: u8,
p: PhantomData<T>,
}
#[repr(transparent)]
struct Y(X<Y>);
```
When attempting to normalize Y, it will still cycle indefinitely. By using a types-visited list, this will instead get expanded exactly one layer deep to X<Y>, and then stop, not attempting to normalize `Y` any further.
This PR was split off from #121962 as part of fixing the larger vtable compatibility issues.
r? ``````@workingjubilee``````
Mention Register Size in `#[warn(asm_sub_register)]`
Fixes#121593
Displays the register size information obtained from `suggest_modifier()` and `default_modifier()`.
Add test in higher ranked subtype
I'm a beginner in this repository, and there are some things I'm not sure about:
- Is it okay that there is a warning:
```
rustc_infer::infer::relate::generalize may incompletely handle alias type: AliasTy { args: [?1t, '^0.Named(DefId(0:15 ~ structually_relate_aliases[de75]::{impl#1}::'a), "'a")], def_id: DefId(0:5 ~ structually_relate_aliases[de75]::ToUnit::Unit) }
```
- Is it okay that there are two duplicate errors in the same line?
- Did I put the test in the right place?
Any suggestions would be appreciated.
Fixes#121649
`rustdoc --test`: Prevent reaching the maximum size of command-line by using files for arguments if there are too many
Fixes#122722.
Thanks to this I discovered that rust was using ``@`` to add arguments from a file, quite convenient.
If there are too many `cfg` arguments given to `rustdoc --test`, it'll now put them into a temporary file and passing it as argument to the rustc command.
I added a test with 100_000 `cfg` arguments to ensure it'll not break again.
r? `@notrid`
Handle str literals written with `'` lexed as lifetime
Given `'hello world'` and `'1 str', provide a structured suggestion for a valid string literal:
```
error[E0762]: unterminated character literal
--> $DIR/lex-bad-str-literal-as-char-3.rs:2:26
|
LL | println!('hello world');
| ^^^^
|
help: if you meant to write a `str` literal, use double quotes
|
LL | println!("hello world");
| ~ ~
```
```
error[E0762]: unterminated character literal
--> $DIR/lex-bad-str-literal-as-char-1.rs:2:20
|
LL | println!('1 + 1');
| ^^^^
|
help: if you meant to write a `str` literal, use double quotes
|
LL | println!("1 + 1");
| ~ ~
```
Fix#119685.
Fix validation on substituted callee bodies in MIR inliner
When inlining a coroutine, we will substitute the MIR body with the args of the call. There is code in the MIR validator that attempts to prevent query cycles, and will use the coroutine body directly when it detects that's the body that's being validated. That means that when inlining a coroutine body that has been substituted, it may no longer be parameterized over the original args of the coroutine, which will lead to substitution ICEs.
Fixes#119064
refactor check_{lang,library}_ub: use a single intrinsic
This enacts the plan I laid out [here](https://github.com/rust-lang/rust/pull/122282#issuecomment-1996917998): use a single intrinsic, called `ub_checks` (in aniticpation of https://github.com/rust-lang/compiler-team/issues/725), that just exposes the value of `debug_assertions` (consistently implemented in both codegen and the interpreter). Put the language vs library UB logic into the library.
This makes it easier to do something like https://github.com/rust-lang/rust/pull/122282 in the future: that just slightly alters the semantics of `ub_checks` (making it more approximating when crates built with different flags are mixed), but it no longer affects whether these checks can happen in Miri or compile-time.
The first commit just moves things around; I don't think these macros and functions belong into `intrinsics.rs` as they are not intrinsics.
r? `@saethlin`
Additional trait bounds beyond the principal trait and its implications
are not possible in the vtable. This means that if a receiver is
`&dyn Foo + Send`, the function will only be expecting `&dyn Foo`.
This strips those auto traits off before CFI encoding.
Rollup of 11 pull requests
Successful merges:
- #120577 (Stabilize slice_split_at_unchecked)
- #122698 (Cancel `cargo update` job if there's no updates)
- #122780 (Rename `hir::Local` into `hir::LetStmt`)
- #122915 (Delay a bug if no RPITITs were found)
- #122916 (docs(sync): normalize dot in fn summaries)
- #122921 (Enable more mir-opt tests in debug builds)
- #122922 (-Zprint-type-sizes: print the types of awaitees and unnamed coroutine locals.)
- #122927 (Change an ICE regression test to use the original reproducer)
- #122930 (add panic location to 'panicked while processing panic')
- #122931 (Fix some typos in the pin.rs)
- #122933 (tag_for_variant follow-ups)
r? `@ghost`
`@rustbot` modify labels: rollup
Change an ICE regression test to use the original reproducer
The ICE was fixed in PR https://github.com/rust-lang/rust/pull/122370, but the test used a different reproducer than the one originally reported. This PR changes it to the original one, giving us more confidence that the fix works.
Fixes#122199
-Zprint-type-sizes: print the types of awaitees and unnamed coroutine locals.
This should assist comprehending the size of coroutines. In particular, whenever a future is suspended while awaiting another future, the latter is given the special name `__awaitee`, and now the type of the awaited future will be printed, allowing identifying caller/callee — er, I mean, poller/pollee — relationships.
It would be possible to include the type name in more cases, but I thought that that might be overly verbose (`print-type-sizes` is already a lot of text) and ordinary named fields or variables are easier for readers to discover the types of.
This change will also synergize with my other PR #122923 which changes type printing to print the path of the `async fn` instead of the span.
Implementation note: I'm not sure if `Symbol::intern` is appropriate for this application, but it was the obvious way to not have to remove the `Copy` implementation from `FieldInfo`, or add a `'tcx` lifetime, while avoiding keeping a lot of possibly redundant strings in memory. I don't know what the proper tradeoff to make here is (though presumably it is not too important for a `-Z` debugging option).
Let codegen decide when to `mem::swap` with immediates
Making `libcore` decide this is silly; the backend has so much better information about when it's a good idea.
Thus this PR introduces a new `typed_swap` intrinsic with a fallback body, and replaces that fallback implementation when swapping immediates or scalar pairs.
r? oli-obk
Replaces #111744, and means we'll never need more libs PRs like #111803 or #107140
This should assist comprehending the size of coroutines.
In particular, whenever a future is suspended while awaiting another
future, the latter is given the special name `__awaitee`, and now the
type of the awaited future will be printed, allowing identifying
caller/callee — er, I mean, poller/pollee — relationships.
It would be possible to include the type name in more cases, but I
thought that that might be overly verbose (`print-type-sizes` is already
a lot of text) and ordinary named fields or variables are easier for
readers to discover the types of.
Current `transform_ty` attempts to avoid cycles when normalizing
`#[repr(transparent)]` types to their interior, but runs afoul of this
pattern used in `self_cell`:
```
struct X<T> {
x: u8,
p: PhantomData<T>,
}
#[repr(transparent)]
struct Y(X<Y>);
```
When attempting to normalize Y, it will still cycle indefinitely. By
using a types-visited list, this will instead get expanded exactly
one layer deep to X<Y>, and then stop, not attempting to normalize `Y`
any further.
Suggest `_` for missing generic arguments in turbofish
The compiler may suggest unusable generic type names for missing generic arguments in an expression context:
```rust
fn main() {
(0..1).collect::<Vec>()
}
```
> help: add missing generic argument
>
> (0..1).collect::<Vec<T>>()
but `T` is not a valid name in this context, and this suggestion won't compile.
I've changed it to use `_` inside method calls (turbofish), so it will suggest `(0..1).collect::<Vec<_>>()` which _may_ compile.
It's possible that the suggested `_` will be ambiguous, but there is very extensive E0283 that will help resolve that, which is more helpful than a basic "cannot find type `T` in this scope" users would get otherwise.
Out of caution to limit scope of the change I've limited it to just turbofish, but I suspect `_` could be the better choice in more cases. Perhaps in all expressions?
Note that the caller chooses a type for type param
```
error[E0308]: mismatched types
--> $DIR/return-impl-trait.rs:23:5
|
LL | fn other_bounds<T>() -> T
| - -
| | |
| | expected `T` because of return type
| | help: consider using an impl return type: `impl Trait`
| expected this type parameter
...
LL | ()
| ^^ expected type parameter `T`, found `()`
|
= note: expected type parameter `T`
found unit type `()`
= note: the caller chooses the type of T which can be different from ()
```
Tried to see if "expected this type parameter" can be replaced, but that goes all the way to `rustc_infer` so seems not worth the effort and can affect other diagnostics.
Revives #112088 and #104755.
compiler: allow transmute of ZST arrays with generics
Extend the `SizeSkeleton` evaluator to shortcut zero-sized arrays, thus considering `[T; 0]` to have a compile-time fixed-size of 0.
The existing evaluator already deals with generic arrays under the feature-guard `transmute_const_generics`. However, it merely allows comparing fixed-size types with fixed-size types, and generic types with generic types. For generic types, it merely compares whether their arguments match (ordering them first). Even if their exact sizes are not known at compile time, it can ensure that they will eventually be the same.
This patch extends this by shortcutting the size-evaluation of zero sized arrays and thus allowing size comparisons of `()` with `[T; 0]`, where one contains generics and the other does not.
This code is guarded by `transmute_const_generics` (#109929), even though it is unclear whether it should be. However, this assumes that a separate stabilization PR is required to move this out of the feature guard.
Initially reported in #98104.
With associated type bounds enabled, the implied_predicates and super_predicates
queries may differ for traits, since associated type bounds are also
implied but are not counted as super predicates.
"Handle" calls to upstream monomorphizations in compiler_builtins
This is pretty cooked, but I think it works.
compiler-builtins has a long-standing problem that at link time, its rlib cannot contain any calls to `core`. And yet, in codegen we _love_ inserting calls to symbols in `core`, generally from various panic entrypoints.
I intend this PR to attack that problem as completely as possible. When we generate a function call, we now check if we are generating a function call from `compiler_builtins` and whether the callee is a function which was not lowered in the current crate, meaning we will have to link to it.
If those conditions are met, actually generating the call is asking for a linker error. So we don't. If the callee diverges, we lower to an abort with the same behavior as `core::intrinsics::abort`. If the callee does not diverge, we produce an error. This means that compiler-builtins can contain panics, but they'll SIGILL instead of panicking. I made non-diverging calls a compile error because I'm guessing that they'd mostly get into compiler-builtins by someone making a mistake while working on the crate, and compile errors are better than linker errors. We could turn such calls into aborts as well if that's preferred.
This skips emitting extra arguments at every callsite (of which there
can be many). For a librustc_driver build with overflow checks enabled,
this cuts 0.7MB from the resulting binary.
coverage: Clean up marker statements that aren't needed later
Some of the marker statements used by coverage are added during MIR building for use by the InstrumentCoverage pass (during analysis), and are not needed afterwards.
```@rustbot``` label +A-code-coverage
Gracefully handle `AnonConst` in `diagnostic_hir_wf_check()`
Instead of running the WF check on the `AnonConst` itself we run it on the `ty` of the generic param of which the `AnonConst` is the default value.
Fixes#122199
Experimental feature postfix match
This has a basic experimental implementation for the RFC postfix match (rust-lang/rfcs#3295, #121618). [Liaison is](https://rust-lang.zulipchat.com/#narrow/stream/213817-t-lang/topic/Postfix.20Match.20Liaison/near/423301844) ```@scottmcm``` with the lang team's [experimental feature gate process](https://github.com/rust-lang/lang-team/blob/master/src/how_to/experiment.md).
This feature has had an RFC for a while, and there has been discussion on it for a while. It would probably be valuable to see it out in the field rather than continue discussing it. This feature also allows to see how popular postfix expressions like this are for the postfix macros RFC, as those will take more time to implement.
It is entirely implemented in the parser, so it should be relatively easy to remove if needed.
This PR is split in to 5 commits to ease review.
1. The implementation of the feature & gating.
2. Add a MatchKind field, fix uses, fix pretty.
3. Basic rustfmt impl, as rustfmt crashes upon seeing this syntax without a fix.
4. Add new MatchSource to HIR for Clippy & other HIR consumers
Some of the marker statements used by coverage are added during MIR building
for use by the InstrumentCoverage pass (during analysis), and are not needed
afterwards.
CFI: Skip non-passed arguments
Rust will occasionally rely on fn((), X) -> Y being compatible with fn(X) -> Y, since () is a non-passed argument. Relax CFI by choosing not to encode non-passed arguments.
This PR was split off from #121962 as part of fixing the larger vtable compatibility issues.
r? `@workingjubilee`
Several (doc) comments were super outdated or didn't provide enough context.
Some doc comments shoved everything in a single paragraph without respecting
the fact that the first paragraph should be a single sentence because rustdoc
treats these as item descriptions / synopses on module pages.
Remove SpecOptionPartialEq
With the recent LLVM bump, the specialization for Option::partial_eq on types with niches is no longer necessary. I kept the manual implementation as it still gives us better codegen than the derive (will look at this seperately).
Also implemented PartialOrd/Ord by hand as it _somewhat_ improves codegen for #49892: https://godbolt.org/z/vx5Y6oW4Y
Add tests for shortcomings of associated type bounds
Adds the test in https://github.com/rust-lang/rust/pull/122791#issuecomment-2011433015
Turns out that #121123 is what breaks `tests/ui/associated-type-bounds/cant-see-copy-bound-from-child-rigid.rs` (passes on nightly), but given that associated type bounds haven't landed anywhere yet, I'm happy with breaking it.
This is unrelated to #122791, which just needed that original commit e6b64c6194 stacked on top of it so that it wouldn't have tests failing.
r? lcnr
Rust will occasionally rely on fn((), X) -> Y being compatible with
fn(X) -> Y, since () is a non-passed argument. Relax CFI by choosing not
to encode non-passed arguments.
Implement macro-based deref!() syntax for deref patterns
Stop using `box PAT` syntax for deref patterns, and instead use a perma-unstable macro.
Blocked on #122222
r? `@Nadrieril`
Interpolated cleanups
Various cleanups I made while working on attempts to remove `Interpolated`, that are worth merging now. Best reviewed one commit at a time.
r? `@petrochenkov`
Strip placeholders from hidden types before remapping generic parameter
When remapping generic parameters in the hidden type to the generic parameters of the definition of the opaque, we assume that placeholders cannot exist. Instead of just patching that site, I decided to handle it earlier, directly in `infer_opaque_types`, where we are already doing all the careful lifetime handling.
fixes#122694
the reason that ICE now occurred was that we stopped treating `operation` as being in the defining scope, so the TAIT became part of the hidden type of the `async fn`'s opaque type instead of just bailing out as ambiguos
I think
```rust
use std::future::Future;
mod foo {
type FutNothing<'a> = impl 'a + Future<Output = ()>;
//~^ ERROR: unconstrained opaque type
}
async fn operation(_: &mut ()) -> () {
//~^ ERROR: concrete type differs from previous
call(operation).await
//~^ ERROR: concrete type differs from previous
}
async fn call<F>(_f: F)
where
for<'any> F: FnMut(&'any mut ()) -> foo::FutNothing<'any>,
{
//~^ ERROR: expected generic lifetime parameter, found `'any`
}
```
would have already had the same ICE before https://github.com/rust-lang/rust/pull/121796
Make `#[diagnostic::on_unimplemented]` format string parsing more robust
This commit fixes several issues with the format string parsing of the `#[diagnostic::on_unimplemented]` attribute that were pointed out by `@ehuss.`
In detail it fixes:
* Appearing format specifiers (display, etc). For these we generate a warning that the specifier is unsupported. Otherwise we ignore them
* Positional arguments. For these we generate a warning that positional arguments are unsupported in that location and replace them with the format string equivalent (so `{}` or `{n}` where n is the index of the positional argument)
* Broken format strings with enclosed }. For these we generate a warning about the broken format string and set the emitted message literally to the provided unformatted string
* Unknown format specifiers. For these we generate an additional warning about the unknown specifier. Otherwise we emit the literal string as message.
This essentially makes those strings behave like `format!` with the minor difference that we do not generate hard errors but only warnings. After that we continue trying to do something unsuprising (mostly either ignoring the broken parts or falling back to just giving back the literal string as provided).
Fix#122391
r? `@compiler-errors`
Make `type_ascribe!` not a built-in
The only weird thing is the macro expansion note. I wonder if we should suppress these 🤔
r? ````@fmease```` since you told me about builtin# lol
Fix misc printing issues in emit=stable_mir
Trying to continue the work that ````@ouz-a```` started here: https://github.com/rust-lang/rust/pull/118364
Few modifications beyond fixes:
1. I made the `pretty_*` functions private.
2. I added a function to print the instance body
3. Changed a bunch of signatures to write to the writer directly.
4. Added a function to translate the place to its internal representation, so we could use the internal debug implementation.
5. Also removed `pretty_ty`, replaced by Display implementation of Ty which uses the internal display.
Add bare metal riscv32 target.
I asked in the embedded Rust matrix if it would be OK to clone a PR to add another riscv32 configuration. The riscv32ima in this case. ``````@MabezDev`````` was open to this suggestion as a maintainer for the Riscv targets.
I now took https://github.com/rust-lang/rust/pull/117958/ for inspiration and added/edited the appropriate files.
# [Tier 3 target policy](https://doc.rust-lang.org/nightly/rustc/target-tier-policy.html#tier-3-target-policy)
> At this tier, the Rust project provides no official support for a target, so we place minimal requirements on the introduction of targets.
>
> A proposed new tier 3 target must be reviewed and approved by a member of the compiler team based on these requirements. The reviewer may choose to gauge broader compiler team consensus via a [Major Change Proposal (MCP)](https://forge.rust-lang.org/compiler/mcp.html).
>
> A proposed target or target-specific patch that substantially changes code shared with other targets (not just target-specific code) must be reviewed and approved by the appropriate team for that shared code before acceptance.
> * A tier 3 target must have a designated developer or developers (the "target maintainers") on record to be CCed when issues arise regarding the target. (The mechanism to track and CC such developers may evolve over time.)
The target being added is using riscv32 as a basis, with added extensions. The riscv32 targets already have a maintainer and are named in the description file.
> * Targets must use naming consistent with any existing targets; for instance, a target for the same CPU or OS as an existing Rust target should use the same name for that CPU or OS. Targets should normally use the same names and naming conventions as used elsewhere in the broader ecosystem beyond Rust (such as in other toolchains), unless they have a very good reason to diverge. Changing the name of a target can be highly disruptive, especially once the target reaches a higher tier, so getting the name right is important even for a tier 3 target.
> * Target names should not introduce undue confusion or ambiguity unless absolutely necessary to maintain ecosystem compatibility. For example, if the name of the target makes people extremely likely to form incorrect beliefs about what it targets, the name should be changed or augmented to disambiguate it.
> * If possible, use only letters, numbers, dashes and underscores for the name. Periods (.) are known to cause issues in Cargo.
Name is derived from the extensions used in the target.
> * Tier 3 targets may have unusual requirements to build or use, but must not create legal issues or impose onerous legal terms for the Rust project or for Rust developers or users.
> * The target must not introduce license incompatibilities.
Same conditions apply compared to other riscv32 targets.
> * Anything added to the Rust repository must be under the standard Rust license (MIT OR Apache-2.0).
Same conditions apply compared to other riscv32 targets.
> * The target must not cause the Rust tools or libraries built for any other host (even when supporting cross-compilation to the target) to depend on any new dependency less permissive than the Rust licensing policy. This applies whether the dependency is a Rust crate that would require adding new license exceptions (as specified by the tidy tool in the rust-lang/rust repository), or whether the dependency is a native library or binary. In other words, the introduction of the target must not cause a user installing or running a version of Rust or the Rust tools to be subject to any new license requirements.
Same conditions apply compared to other riscv32 targets.
> * Compiling, linking, and emitting functional binaries, libraries, or other code for the target (whether hosted on the target itself or cross-compiling from another target) must not depend on proprietary (non-FOSS) libraries. Host tools built for the target itself may depend on the ordinary runtime libraries supplied by the platform and commonly used by other applications built for the target, but those libraries must not be required for code generation for the target; cross-compilation to the target must not require such libraries at all. For instance, rustc built for the target may depend on a common proprietary C runtime library or console output library, but must not depend on a proprietary code generation library or code optimization library. Rust's license permits such combinations, but the Rust project has no interest in maintaining such combinations within the scope of Rust itself, even at tier 3.
Same conditions apply compared to other riscv32 targets.
> * "onerous" here is an intentionally subjective term. At a minimum, "onerous" legal/licensing terms include but are not limited to: non-disclosure requirements, non-compete requirements, contributor license agreements (CLAs) or equivalent, "non-commercial"/"research-only"/etc terms, requirements conditional on the employer or employment of any particular Rust developers, revocable terms, any requirements that create liability for the Rust project or its developers or users, or any requirements that adversely affect the livelihood or prospects of the Rust project or its developers or users.
Same conditions apply compared to other riscv32 targets.
> * Neither this policy nor any decisions made regarding targets shall create any binding agreement or estoppel by any party. If any member of an approving Rust team serves as one of the maintainers of a target, or has any legal or employment requirement (explicit or implicit) that might affect their decisions regarding a target, they must recuse themselves from any approval decisions regarding the target's tier status, though they may otherwise participate in discussions.
> * This requirement does not prevent part or all of this policy from being cited in an explicit contract or work agreement (e.g. to implement or maintain support for a target). This requirement exists to ensure that a developer or team responsible for reviewing and approving a target does not face any legal threats or obligations that would prevent them from freely exercising their judgment in such approval, even if such judgment involves subjective matters or goes beyond the letter of these requirements.
Same conditions apply compared to other riscv32 targets.
> * Tier 3 targets should attempt to implement as much of the standard libraries as possible and appropriate (core for most targets, alloc for targets that can support dynamic memory allocation, std for targets with an operating system or equivalent layer of system-provided functionality), but may leave some code unimplemented (either unavailable or stubbed out as appropriate), whether because the target makes it impossible to implement or challenging to implement. The authors of pull requests are not obligated to avoid calling any portions of the standard library on the basis of a tier 3 target not implementing those portions.
This target is build on top of existing riscv32 targets and inherits these implementations.
> * The target must provide documentation for the Rust community explaining how to build for the target, using cross-compilation if possible. If the target supports running binaries, or running tests (even if they do not pass), the documentation must explain how to run such binaries or tests for the target, using emulation if possible or dedicated hardware if necessary.
The documentation of this target is shared along with targets that target riscv32 with a different configuration of extensions.
> * Tier 3 targets must not impose burden on the authors of pull requests, or other developers in the community, to maintain the target. In particular, do not post comments (automated or manual) on a PR that derail or suggest a block on the PR based on a tier 3 target. Do not send automated messages or notifications (via any medium, including via ``````@)`````` to a PR author or others involved with a PR regarding a tier 3 target, unless they have opted into such messages.
I now understand, apologies for the mention before.
> * Backlinks such as those generated by the issue/PR tracker when linking to an issue or PR are not considered a violation of this policy, within reason. However, such messages (even on a separate repository) must not generate notifications to anyone involved with a PR who has not requested such notifications.
I now understand, apologies for the link to a similar PR before.
> * Patches adding or updating tier 3 targets must not break any existing tier 2 or tier 1 target, and must not knowingly break another tier 3 target without approval of either the compiler team or the maintainers of the other tier 3 target.
> * In particular, this may come up when working on closely related targets, such as variations of the same architecture with different features. Avoid introducing unconditional uses of features that another variation of the target may not have; use conditional compilation or runtime detection, as appropriate, to let each target run code supported by that target.
This should not cause issues, as the target has similarities to other configurations of the riscv32 targets.
> * Tier 3 targets must be able to produce assembly using at least one of rustc's supported backends from any host target.
This should not cause issues, as the target has similarities to other configurations of the riscv32 targets.
Don't ICE when encountering bound regions in generator interior type
I'm pretty sure this meant to say "`has_free_regions`", probably just a typo in 4a4fc3bb5b. We can have bound regions (because we only convert non-bound regions into existential regions in generator interiors), but we can't have (non-ReErased) free regions.
r? lcnr
deref patterns: bare-bones feature gate and typechecking
I am restarting the deref patterns experimentation. This introduces a feature gate under the lang-team [experimental feature](https://github.com/rust-lang/lang-team/blob/master/src/how_to/experiment.md) process, with [````@cramertj```` as lang-team liaison](https://github.com/rust-lang/lang-team/issues/88) (it's been a while though, you still ok with this ````@cramertj?).```` Tracking issue: https://github.com/rust-lang/rust/issues/87121.
This is the barest-bones implementation I could think of:
- explicit syntax, reusing `box <pat>` because that saves me a ton of work;
- use `Deref` as a marker trait (instead of a yet-to-design `DerefPure`);
- no support for mutable patterns with `DerefMut` for now;
- MIR lowering will come in the next PR. It's the trickiest part.
My goal is to let us figure out the MIR lowering part, which might take some work. And hopefully get something working for std types soon.
This is in large part salvaged from ````@fee1-dead's```` https://github.com/rust-lang/rust/pull/119467.
r? ````@compiler-errors````
recursively evaluate the constants in everything that is 'mentioned'
This is another attempt at fixing https://github.com/rust-lang/rust/issues/107503. The previous attempt at https://github.com/rust-lang/rust/pull/112879 seems stuck in figuring out where the [perf regression](https://perf.rust-lang.org/compare.html?start=c55d1ee8d4e3162187214692229a63c2cc5e0f31&end=ec8de1ebe0d698b109beeaaac83e60f4ef8bb7d1&stat=instructions:u) comes from. In https://github.com/rust-lang/rust/pull/122258 I learned some things, which informed the approach this PR is taking.
Quoting from the new collector docs, which explain the high-level idea:
```rust
//! One important role of collection is to evaluate all constants that are used by all the items
//! which are being collected. Codegen can then rely on only encountering constants that evaluate
//! successfully, and if a constant fails to evaluate, the collector has much better context to be
//! able to show where this constant comes up.
//!
//! However, the exact set of "used" items (collected as described above), and therefore the exact
//! set of used constants, can depend on optimizations. Optimizing away dead code may optimize away
//! a function call that uses a failing constant, so an unoptimized build may fail where an
//! optimized build succeeds. This is undesirable.
//!
//! To fix this, the collector has the concept of "mentioned" items. Some time during the MIR
//! pipeline, before any optimization-level-dependent optimizations, we compute a list of all items
//! that syntactically appear in the code. These are considered "mentioned", and even if they are in
//! dead code and get optimized away (which makes them no longer "used"), they are still
//! "mentioned". For every used item, the collector ensures that all mentioned items, recursively,
//! do not use a failing constant. This is reflected via the [`CollectionMode`], which determines
//! whether we are visiting a used item or merely a mentioned item.
//!
//! The collector and "mentioned items" gathering (which lives in `rustc_mir_transform::mentioned_items`)
//! need to stay in sync in the following sense:
//!
//! - For every item that the collector gather that could eventually lead to build failure (most
//! likely due to containing a constant that fails to evaluate), a corresponding mentioned item
//! must be added. This should use the exact same strategy as the ecollector to make sure they are
//! in sync. However, while the collector works on monomorphized types, mentioned items are
//! collected on generic MIR -- so any time the collector checks for a particular type (such as
//! `ty::FnDef`), we have to just onconditionally add this as a mentioned item.
//! - In `visit_mentioned_item`, we then do with that mentioned item exactly what the collector
//! would have done during regular MIR visiting. Basically you can think of the collector having
//! two stages, a pre-monomorphization stage and a post-monomorphization stage (usually quite
//! literally separated by a call to `self.monomorphize`); the pre-monomorphizationn stage is
//! duplicated in mentioned items gathering and the post-monomorphization stage is duplicated in
//! `visit_mentioned_item`.
//! - Finally, as a performance optimization, the collector should fill `used_mentioned_item` during
//! its MIR traversal with exactly what mentioned item gathering would have added in the same
//! situation. This detects mentioned items that have *not* been optimized away and hence don't
//! need a dedicated traversal.
enum CollectionMode {
/// Collect items that are used, i.e., actually needed for codegen.
///
/// Which items are used can depend on optimization levels, as MIR optimizations can remove
/// uses.
UsedItems,
/// Collect items that are mentioned. The goal of this mode is that it is independent of
/// optimizations: the set of "mentioned" items is computed before optimizations are run.
///
/// The exact contents of this set are *not* a stable guarantee. (For instance, it is currently
/// computed after drop-elaboration. If we ever do some optimizations even in debug builds, we
/// might decide to run them before computing mentioned items.) The key property of this set is
/// that it is optimization-independent.
MentionedItems,
}
```
And the `mentioned_items` MIR body field docs:
```rust
/// Further items that were mentioned in this function and hence *may* become monomorphized,
/// depending on optimizations. We use this to avoid optimization-dependent compile errors: the
/// collector recursively traverses all "mentioned" items and evaluates all their
/// `required_consts`.
///
/// This is *not* soundness-critical and the contents of this list are *not* a stable guarantee.
/// All that's relevant is that this set is optimization-level-independent, and that it includes
/// everything that the collector would consider "used". (For example, we currently compute this
/// set after drop elaboration, so some drop calls that can never be reached are not considered
/// "mentioned".) See the documentation of `CollectionMode` in
/// `compiler/rustc_monomorphize/src/collector.rs` for more context.
pub mentioned_items: Vec<Spanned<MentionedItem<'tcx>>>,
```
Fixes#107503
This commit fixes several issues with the format string parsing of the
`#[diagnostic::on_unimplemented]` attribute that were pointed out by
@ehuss.
In detail it fixes:
* Appearing format specifiers (display, etc). For these we generate a
warning that the specifier is unsupported. Otherwise we ignore them
* Positional arguments. For these we generate a warning that positional
arguments are unsupported in that location and replace them with the
format string equivalent (so `{}` or `{n}` where n is the index of the
positional argument)
* Broken format strings with enclosed }. For these we generate a warning
about the broken format string and set the emitted message literally to
the provided unformatted string
* Unknown format specifiers. For these we generate an additional warning
about the unknown specifier. Otherwise we emit the literal string as
message.
This essentially makes those strings behave like `format!` with the
minor difference that we do not generate hard errors but only warnings.
After that we continue trying to do something unsuprising (mostly either
ignoring the broken parts or falling back to just giving back the
literal string as provided).
Fix#122391
Split an item bounds and an item's super predicates
This is the moral equivalent of #107614, but instead for predicates this applies to **item bounds**. This PR splits out the item bounds (i.e. *all* predicates that are assumed to hold for the alias) from the item *super predicates*, which are the subset of item bounds which share the same self type as the alias.
## Why?
Much like #107614, there are places in the compiler where we *only* care about super-predicates, and considering predicates that possibly don't have anything to do with the alias is problematic. This includes things like closure signature inference (which is at its core searching for `Self: Fn(..)` style bounds), but also lints like `#[must_use]`, error reporting for aliases, computing type outlives predicates.
Even in cases where considering all of the `item_bounds` doesn't lead to bugs, unnecessarily considering irrelevant bounds does lead to a regression (#121121) due to doing extra work in the solver.
## Example 1 - Trait Aliases
This is best explored via an example:
```
type TAIT<T> = impl TraitAlias<T>;
trait TraitAlias<T> = A + B where T: C;
```
The item bounds list for `Tait<T>` will include:
* `Tait<T>: A`
* `Tait<T>: B`
* `T: C`
While `item_super_predicates` query will include just the first two predicates.
Side-note: You may wonder why `T: C` is included in the item bounds for `TAIT`? This is because when we elaborate `TraitAlias<T>`, we will also elaborate all the predicates on the trait.
## Example 2 - Associated Type Bounds
```
type TAIT<T> = impl Iterator<Item: A>;
```
The `item_bounds` list for `TAIT<T>` will include:
* `Tait<T>: Iterator`
* `<Tait<T> as Iterator>::Item: A`
But the `item_super_predicates` will just include the first bound, since that's the only bound that is relevant to the *alias* itself.
## So what
This leads to some diagnostics duplication just like #107614, but none of it will be user-facing. We only see it in the UI test suite because we explicitly disable diagnostic deduplication.
Regarding naming, I went with `super_predicates` kind of arbitrarily; this can easily be changed, but I'd consider better names as long as we don't block this PR in perpetuity.
Fix bad span for explicit lifetime suggestions
Fixes#121267
Current explicit lifetime suggestions are not showing correct spans for some lifetimes - e.g. elided lifetime generic parameters;
This should be done correctly regarding elided lifetime kind like the following code
43fdd4916d/compiler/rustc_resolve/src/late/diagnostics.rs (L3015-L3044)
coverage: Remove incorrect assertions from counter allocation
These assertions detect situations where a BCB node (in the coverage graph) would have both a physical counter and one or more in-edge counters/expressions.
For most BCBs that situation would indicate an implementation bug. However, it's perfectly fine in the case of a BCB having an edge that loops back to itself.
Given the complexity and risk involved in fixing the assertions, and the fact that nothing relies on them actually being true, this patch just removes them instead.
Fixes#122738.
`````@rustbot````` label +A-code-coverage
For async closures, cap closure kind, get rid of `by_mut_body`
Right now we have three `AsyncFn*` traits, and three corresponding futures that are returned by the `call_*` functions for them. This is fine, but it is a bit excessive, since the future returned by `AsyncFn` and `AsyncFnMut` are identical. Really, the only distinction we need to make with these bodies is "by ref" and "by move".
This PR removes `AsyncFn::CallFuture` and renames `AsyncFnMut::CallMutFuture` to `AsyncFnMut::CallRefFuture`. This simplifies MIR building for async closures, since we don't need to build an extra "by mut" body, but just a "by move" body which is materially different.
We need to do a bit of delicate handling of the ClosureKind for async closures, since we need to "cap" it to `AsyncFnMut` in some cases when we only care about what body we're looking for.
This also fixes a bug where `<{async closure} as Fn>::call` was returning a body that takes the async-closure receiver *by move*.
This also helps align the `AsyncFn` traits to the `LendingFn` traits' eventual designs.
Extend the `SizeSkeleton` evaluator to shortcut zero-sized arrays, thus
considering `[T; 0]` to have a compile-time fixed-size of 0.
The existing evaluator already deals with generic arrays under the
feature-guard `transmute_const_generics`. However, it merely allows
comparing fixed-size types with fixed-size types, and generic types with
generic types. For generic types, it merely compares whether their
arguments match (ordering them first). Even if their exact sizes are not
known at compile time, it can ensure that they will eventually be the
same.
This patch extends this by shortcutting the size-evaluation of zero
sized arrays and thus allowing size comparisons of `()` with `[T; 0]`,
where one contains generics and the other does not.
This code is guarded by `transmute_const_generics` (#109929), even
though it is unclear whether it should be. However, this assumes that a
separate stabilization PR is required to move this out of the feature
guard.
Initially reported in #98104.
These assertions detect situations where a BCB node would have both a physical
counter and one or more in-edge counters/expressions.
For most BCBs that situation would indicate an implementation bug. However,
it's perfectly fine in the case of a BCB having an edge that loops back to
itself.
Given the complexity and risk involved in fixing the assertions, and the fact
that nothing relies on them actually being true, this patch just removes them
instead.
Remove redundant coroutine captures note
This note is redundant, since we'll always be printing this "captures the following types..." between *more* descriptive `BuiltinDerivedObligationCause`s.
Please review with whitespace disabled, since I also removed an unnecessary labeled break.
Silence unecessary !Sized binding error
When gathering locals, we introduce a `Sized` obligation for each
binding in the pattern. *After* doing so, we typecheck the init
expression. If this has a type failure, we store `{type error}`, for
both the expression and the pattern. But later we store an inference
variable for the pattern.
We now avoid any override of an existing type on a hir node when they've
already been marked as `{type error}`, and on E0277, when it comes from
`VariableType` we silence the error in support of the type error.
Fix https://github.com/rust-lang/rust/issues/117846
When gathering locals, we introduce a `Sized` obligation for each
binding in the pattern. *After* doing so, we typecheck the init
expression. If this has a type failure, we store `{type error}`, for
both the expression and the pattern. But later we store an inference
variable for the pattern.
We now avoid any override of an existing type on a hir node when they've
already been marked as `{type error}`, and on E0277, when it comes from
`VariableType` we silence the error in support of the type error.
Fix#117846.
Rollup of 10 pull requests
Successful merges:
- #122435 (Don't trigger `unused_qualifications` on global paths)
- #122556 (Extend format arg help for simple tuple index access expression)
- #122634 (compiletest: Add support for `//@ aux-bin: foo.rs`)
- #122677 (Fix incorrect mutable suggestion information for binding in ref pattern.)
- #122691 (Fix ICE: `global_asm!()` Don't Panic When Unable to Evaluate Constant)
- #122695 (Change only_local to a enum type.)
- #122717 (Ensure stack before parsing dot-or-call)
- #122719 (Ensure nested statics have a HIR node to prevent various queries from ICEing)
- #122720 ([doc]:fix error code example)
- #122724 (add test for casting pointer to union with unsized tail)
r? `@ghost`
`@rustbot` modify labels: rollup
Ensure stack before parsing dot-or-call
There are many cases where, due to codegen or a massively unruly codebase, a deeply nested `call(call(call(call(call(call(call(call(call(f())))))))))` can happen. This is a spot where it would be good to grow our stack, so that we can survive to tell the programmer their code is dubiously written.
Closes https://github.com/rust-lang/rust/issues/122715
Fix ICE: `global_asm!()` Don't Panic When Unable to Evaluate Constant
Fixes#121099
A bit of an inelegant fix but given that the error is created only
after call to `const_eval_poly()` and that the calling function
cannot propagate the error anywhere else, the error has to be
explicitly handled inside `mono_item.rs`.
r? `@Amanieu`
Fix incorrect mutable suggestion information for binding in ref pattern.
For ref pattern in func param, the mutability suggestion has to apply to the binding.
For example: `fn foo(&x: &i32)` -> `fn foo(&(mut x): &i32)`
fixes#122415
compiletest: Add support for `//@ aux-bin: foo.rs`
Which enables ui tests to use auxiliary binaries. See the added
self-test for an example.
This is an enabler for the test in https://github.com/rust-lang/rust/pull/121573.
Extend format arg help for simple tuple index access expression
The help is only applicable for simple field access `a.b` and (with this PR) simple tuple index access expressions `a.0`.
Closes#122535.
misc cleanups from debugging something
rename `instantiate_canonical_with_fresh_inference_vars` to `instantiate_canonical` the substs for the canonical are not solely infer vars as that would be wildly wrong and it is rather confusing to see this method called and think that the entire canonicalization setup is completely broken when it is not 👍
also update region debug printing to be more like the custom impls for Ty/Const, right now regions in debug output are horribly verbose and make it incredibly hard to read but with this atleast boundvars and placeholders when debugging the new solver do not take up excessive amounts of space.
r? `@lcnr`
Fix representation when printing abstract consts
Previously, when printing a const generic expr, it would only display it as `{{const expr}}`. This allows for a more legible representation when printing these out.
I also zipped the types with their constants for abstract consts that contain function calls when using type annotations, eg: `foo(S: usize, true: bool) -> usize` insteaad of `foo(S, true): fn(usize, bool) -> usize` for conciseness.
Remove some only- clauses from mir-opt tests
Derived from https://github.com/rust-lang/rust/pull/122295
Many of these tests were originally codegen tests, and MIR is more trivially portable than LLVM IR. We simply don't need to restrict the platform in most cases.
r? Nadrieril
There are many cases where, due to codegen or a massively unruly codebase,
a deeply nested call(call(call(call(call(call(call(call(call(f())))))))))
can happen. This is a spot where it would be good to grow our stack, so that
we can survive to tell the programmer their code is dubiously written.
For ref pattern in func param, the mutability suggestion has to apply to the binding.
For example: `fn foo(&x: &i32)` -> `fn foo(&(mut x): &i32)`
fixes#122415
clean up `Sized` checking
This PR cleans up `sized_constraint` and related functions to make them simpler and faster. This should not make more or less code compile, but it can change error output in some rare cases.
## enums and unions are `Sized`, even if they are not WF
The previous code has some special handling for enums, which made them sized if and only if the last field of each variant is sized. For example given this definition (which is not WF)
```rust
enum E<T1: ?Sized, T2: ?Sized, U1: ?Sized, U2: ?Sized> {
A(T1, T2),
B(U1, U2),
}
```
the enum was sized if and only if `T2` and `U2` are sized, while `T1` and `T2` were ignored for `Sized` checking. After this PR this enum will always be sized.
Unsized enums are not a thing in Rust and removing this special case allows us to return an `Option<Ty>` from `sized_constraint`, rather than a `List<Ty>`.
Similarly, the old code made an union defined like this
```rust
union Union<T: ?Sized, U: ?Sized> {
head: T,
tail: U,
}
```
sized if and only if `U` is sized, completely ignoring `T`. This just makes no sense at all and now this union is always sized.
## apply the "perf hack" to all (non-error) types, instead of just type parameters
This "perf hack" skips evaluating `sized_constraint(adt): Sized` if `sized_constraint(adt): Sized` exactly matches a predicate defined on `adt`, for example:
```rust
// `Foo<T>: Sized` iff `T: Sized`, but we know `T: Sized` from a predicate of `Foo`
struct Foo<T /*: Sized */>(T);
```
Previously this was only applied to type parameters and now it is applied to every type. This means that for example this type is now always sized:
```rust
// Note that this definition is WF, but the type `S<T>` not WF in the global/empty ParamEnv
struct S<T>([T]) where [T]: Sized;
```
I don't anticipate this to affect compile time of any real-world program, but it makes the code a bit nicer and it also makes error messages a bit more consistent if someone does write such a cursed type.
## tuples are sized if the last type is sized
The old solver already has this behavior and this PR also implements it for the new solver and `is_trivially_sized`. This makes it so that tuples work more like a struct defined like this:
```rust
struct TupleN<T1, T2, /* ... */ Tn: ?Sized>(T1, T2, /* ... */ Tn);
```
This might improve the compile time of programs with large tuples a little, but is mostly also a consistency fix.
## `is_trivially_sized` for more types
This function is used post-typeck code (borrowck, const eval, codegen) to skip evaluating `T: Sized` in some cases. It will now return `true` in more cases, most notably `UnsafeCell<T>` and `ManuallyDrop<T>` where `T.is_trivially_sized`.
I'm anticipating that this change will improve compile time for some real world programs.
CFI: Break tests into smaller files
Break type metadata identifiers tests into smaller set of tests/files, and move CFI (and KCFI) codegen tests to a cfi (and kcfi) subdirectory,
Stabilize associated type bounds (RFC 2289)
This PR stabilizes associated type bounds, which were laid out in [RFC 2289]. This gives us a shorthand to express nested type bounds that would otherwise need to be expressed with nested `impl Trait` or broken into several `where` clauses.
### What are we stabilizing?
We're stabilizing the associated item bounds syntax, which allows us to put bounds in associated type position within other bounds, i.e. `T: Trait<Assoc: Bounds...>`. See [RFC 2289] for motivation.
In all position, the associated type bound syntax expands into a set of two (or more) bounds, and never anything else (see "How does this differ[...]" section for more info).
Associated type bounds are stabilized in four positions:
* **`where` clauses (and APIT)** - This is equivalent to breaking up the bound into two (or more) `where` clauses. For example, `where T: Trait<Assoc: Bound>` is equivalent to `where T: Trait, <T as Trait>::Assoc: Bound`.
* **Supertraits** - Similar to above, `trait CopyIterator: Iterator<Item: Copy> {}`. This is almost equivalent to breaking up the bound into two (or more) `where` clauses; however, the bound on the associated item is implied whenever the trait is used. See #112573/#112629.
* **Associated type item bounds** - This allows constraining the *nested* rigid projections that are associated with a trait's associated types. e.g. `trait Trait { type Assoc: Trait2<Assoc2: Copy>; }`.
* **opaque item bounds (RPIT, TAIT)** - This allows constraining associated types that are associated with the opaque without having to *name* the opaque. For example, `impl Iterator<Item: Copy>` defines an iterator whose item is `Copy` without having to actually name that item bound.
The latter three are not expressible in surface Rust (though for associated type item bounds, this will change in #120752, which I don't believe should block this PR), so this does represent a slight expansion of what can be expressed in trait bounds.
### How does this differ from the RFC?
Compared to the RFC, the current implementation *always* desugars associated type bounds to sets of `ty::Clause`s internally. Specifically, it does *not* introduce a position-dependent desugaring as laid out in [RFC 2289], and in particular:
* It does *not* desugar to anonymous associated items in associated type item bounds.
* It does *not* desugar to nested RPITs in RPIT bounds, nor nested TAITs in TAIT bounds.
This position-dependent desugaring laid out in the RFC existed simply to side-step limitations of the trait solver, which have mostly been fixed in #120584. The desugaring laid out in the RFC also added unnecessary complication to the design of the feature, and introduces its own limitations to, for example:
* Conditionally lowering to nested `impl Trait` in certain positions such as RPIT and TAIT means that we inherit the limitations of RPIT/TAIT, namely lack of support for higher-ranked opaque inference. See this code example: https://github.com/rust-lang/rust/pull/120752#issuecomment-1979412531.
* Introducing anonymous associated types makes traits no longer object safe, since anonymous associated types are not nameable, and all associated types must be named in `dyn` types.
This last point motivates why this PR is *not* stabilizing support for associated type bounds in `dyn` types, e.g, `dyn Assoc<Item: Bound>`. Why? Because `dyn` types need to have *concrete* types for all associated items, this would necessitate a distinct lowering for associated type bounds, which seems both complicated and unnecessary compared to just requiring the user to write `impl Trait` themselves. See #120719.
### Implementation history:
Limited to the significant behavioral changes and fixes and relevant PRs, ping me if I left something out--
* #57428
* #108063
* #110512
* #112629
* #120719
* #120584Closes#52662
[RFC 2289]: https://rust-lang.github.io/rfcs/2289-associated-type-bounds.html
`NormalizesTo`: return nested goals to caller
Fixes the regression of `paperclip-core`. see https://hackmd.io/IsVAafiOTAaPIFcUxRJufw for more details.
r? ```@compiler-errors```
Provide structured suggestion for `#![feature(foo)]`
```
error: `S2<'_>` is forbidden as the type of a const generic parameter
--> $DIR/lifetime-in-const-param.rs:5:23
|
LL | struct S<'a, const N: S2>(&'a ());
| ^^
|
= note: the only supported types are integers, `bool` and `char`
help: add `#![feature(adt_const_params)]` to the crate attributes to enable more complex and user defined types
|
LL + #![feature(adt_const_params)]
|
```
Fix#55941.
never patterns: suggest `!` patterns on non-exhaustive matches
When a match is non-exhaustive we now suggest never patterns whenever it makes sense.
r? ``@compiler-errors``
Reject overly generic assoc const binding types
Split off from #119385 to make #119385 easier to review.
---
In the *instantiated* type of assoc const bindings
1. reject **early-bound generic params**
* Provide a rich error message instead of ICE'ing ([#108271](https://github.com/rust-lang/rust/issues/108271)).
* This is a temporary and semi-artificial restriction until the arrival of *generic const generics*.
* It's quite possible that rustc could already perfectly support this subset of generic const generics if we just removed some checks (some `.no_bound_vars().expect(…)`) but even if that was the case, I'd rather gate it behind a new feature flag. Reporting an error instead of ICE'ing is a good first step towards an eventual feature gate error.
2. reject **escaping late-bound generic params**
* They lead to ICEs before & I'm pretty sure that they remain incorrect even in a world with *generic const generics*
---
Together with #118668 & #119385, this supersedes #118360.
Fixes#108271.
```
error: `S2<'_>` is forbidden as the type of a const generic parameter
--> $DIR/lifetime-in-const-param.rs:5:23
|
LL | struct S<'a, const N: S2>(&'a ());
| ^^
|
= note: the only supported types are integers, `bool` and `char`
help: add `#![feature(adt_const_params)]` to the crate attributes to enable more complex and user defined types
|
LL + #![feature(adt_const_params)]
|
```
Fix#55941.
A bit of an inelegant fix but given that the error is created only
after call to `const_eval_poly()` and that the calling function
cannot propagate the error anywhere else, the error has to be
explicitly handled inside `mono_item.rs`.
Do not eat nested expressions' results in `MayContainYieldPoint` format args visitor
#121563 unintentionally changed the `MayContainYieldPoint` format args visitor behavior, now missing yield points in nested expressions, as seen in #122674.
The walk can find a yield point in an expression but it was ignored.
r? ``@petrochenkov`` as the reviewer of #121563
cc ``@Jarcho`` as the author
Fixes#122674.
We're in the 1.77 release week. #121563 will land on 1.78 but beta is still 1.77.9: this PR will likely need to be backported soon after beta is cut.
Update the minimum external LLVM to 17
With this change, we'll have stable support for LLVM 17 and 18.
For reference, the previous increase to LLVM 16 was #117947.
Move `option_env!` and `env!` tests to the `env-macro` directory
This PR moves the `option_env!` tests to there own directory (`extoption_env`), matching the naming convention used by the tests for `env!` (which live in the `extenv` directory).
simplify_cfg: rename some passes so that they make more sense
I was extremely confused by `SimplifyCfg::ElaborateDrops`, since it runs way later than drop elaboration. It is used e.g. in `mir-opt/retag.rs` even though that pass doesn't care about drop elaboration at all.
"Early opt" is also very confusing since that makes it sounds like it runs early during optimizations, i.e. on runtime MIR, but actually it runs way before that.
So I decided to rename
- early-opt -> post-analysis
- elaborate-drops -> pre-optimizations
I am open to other suggestions.
Detect when move of !Copy value occurs within loop and should likely not be cloned
When encountering a move error on a value within a loop of any kind,
identify if the moved value belongs to a call expression that should not
be cloned and avoid the semantically incorrect suggestion. Also try to
suggest moving the call expression outside of the loop instead.
```
error[E0382]: use of moved value: `vec`
--> $DIR/recreating-value-in-loop-condition.rs:6:33
|
LL | let vec = vec!["one", "two", "three"];
| --- move occurs because `vec` has type `Vec<&str>`, which does not implement the `Copy` trait
LL | while let Some(item) = iter(vec).next() {
| ----------------------------^^^--------
| | |
| | value moved here, in previous iteration of loop
| inside of this loop
|
note: consider changing this parameter type in function `iter` to borrow instead if owning the value isn't necessary
--> $DIR/recreating-value-in-loop-condition.rs:1:17
|
LL | fn iter<T>(vec: Vec<T>) -> impl Iterator<Item = T> {
| ---- ^^^^^^ this parameter takes ownership of the value
| |
| in this function
help: consider moving the expression out of the loop so it is only moved once
|
LL ~ let mut value = iter(vec);
LL ~ while let Some(item) = value.next() {
|
```
We use the presence of a `break` in the loop that would be affected by
the moved value as a heuristic for "shouldn't be cloned".
Fix https://github.com/rust-lang/rust/issues/121466.
---
*Point at continue and break that might be in the wrong place*
Sometimes move errors are because of a misplaced `continue`, but we didn't
surface that anywhere. Now when there are more than one set of nested loops
we show them out and point at the `continue` and `break` expressions within
that might need to go elsewhere.
```
error[E0382]: use of moved value: `foo`
--> $DIR/nested-loop-moved-value-wrong-continue.rs:46:18
|
LL | for foo in foos {
| ---
| |
| this reinitialization might get skipped
| move occurs because `foo` has type `String`, which does not implement the `Copy` trait
...
LL | for bar in &bars {
| ---------------- inside of this loop
...
LL | baz.push(foo);
| --- value moved here, in previous iteration of loop
...
LL | qux.push(foo);
| ^^^ value used here after move
|
note: verify that your loop breaking logic is correct
--> $DIR/nested-loop-moved-value-wrong-continue.rs:41:17
|
LL | for foo in foos {
| ---------------
...
LL | for bar in &bars {
| ----------------
...
LL | continue;
| ^^^^^^^^ this `continue` advances the loop at line 33
help: consider moving the expression out of the loop so it is only moved once
|
LL ~ let mut value = baz.push(foo);
LL ~ for bar in &bars {
LL |
...
LL | if foo == *bar {
LL ~ value;
|
help: consider cloning the value if the performance cost is acceptable
|
LL | baz.push(foo.clone());
| ++++++++
```
Fix https://github.com/rust-lang/rust/issues/92531.
Given `'hello world'` and `'1 str', provide a structured suggestion for a valid string literal:
```
error[E0762]: unterminated character literal
--> $DIR/lex-bad-str-literal-as-char-3.rs:2:26
|
LL | println!('hello world');
| ^^^^
|
help: if you meant to write a `str` literal, use double quotes
|
LL | println!("hello world");
| ~ ~
```
```
error[E0762]: unterminated character literal
--> $DIR/lex-bad-str-literal-as-char-1.rs:2:20
|
LL | println!('1 + 1');
| ^^^^
|
help: if you meant to write a `str` literal, use double quotes
|
LL | println!("1 + 1");
| ~ ~
```
Fix#119685.
Sometimes move errors are because of a misplaced `continue`, but we didn't
surface that anywhere. Now when there are more than one set of nested loops
we show them out and point at the `continue` and `break` expressions within
that might need to go elsewhere.
```
error[E0382]: use of moved value: `foo`
--> $DIR/nested-loop-moved-value-wrong-continue.rs:46:18
|
LL | for foo in foos {
| ---
| |
| this reinitialization might get skipped
| move occurs because `foo` has type `String`, which does not implement the `Copy` trait
...
LL | for bar in &bars {
| ---------------- inside of this loop
...
LL | baz.push(foo);
| --- value moved here, in previous iteration of loop
...
LL | qux.push(foo);
| ^^^ value used here after move
|
note: verify that your loop breaking logic is correct
--> $DIR/nested-loop-moved-value-wrong-continue.rs:41:17
|
LL | for foo in foos {
| ---------------
...
LL | for bar in &bars {
| ----------------
...
LL | continue;
| ^^^^^^^^ this `continue` advances the loop at line 33
help: consider moving the expression out of the loop so it is only moved once
|
LL ~ let mut value = baz.push(foo);
LL ~ for bar in &bars {
LL |
...
LL | if foo == *bar {
LL ~ value;
|
help: consider cloning the value if the performance cost is acceptable
|
LL | baz.push(foo.clone());
| ++++++++
```
Fix#92531.
When encountering a move error on a value within a loop of any kind,
identify if the moved value belongs to a call expression that should not
be cloned and avoid the semantically incorrect suggestion. Also try to
suggest moving the call expression outside of the loop instead.
```
error[E0382]: use of moved value: `vec`
--> $DIR/recreating-value-in-loop-condition.rs:6:33
|
LL | let vec = vec!["one", "two", "three"];
| --- move occurs because `vec` has type `Vec<&str>`, which does not implement the `Copy` trait
LL | while let Some(item) = iter(vec).next() {
| ----------------------------^^^--------
| | |
| | value moved here, in previous iteration of loop
| inside of this loop
|
note: consider changing this parameter type in function `iter` to borrow instead if owning the value isn't necessary
--> $DIR/recreating-value-in-loop-condition.rs:1:17
|
LL | fn iter<T>(vec: Vec<T>) -> impl Iterator<Item = T> {
| ---- ^^^^^^ this parameter takes ownership of the value
| |
| in this function
help: consider moving the expression out of the loop so it is only moved once
|
LL ~ let mut value = iter(vec);
LL ~ while let Some(item) = value.next() {
|
```
We use the presence of a `break` in the loop that would be affected by
the moved value as a heuristic for "shouldn't be cloned".
Fix#121466.
