Avoid heap allocation when truncating thread names
Ensure that heap allocation does not occur in a thread until `std::thread` is ready. This fixes issues with custom allocators that call `std:🧵:current()`, since doing so prematurely initializes `THREAD_INFO` and causes the following `thread_info::set()` to fail.
Remove wrong note for short circuiting operators
They *are* representable by traits, even if the short-circuiting behaviour requires a different approach than the non-short-circuiting operators. For an example proposal, see the postponed [RFC 2722](https://github.com/rust-lang/rfcs/pull/2722). As it is not accurate, remove most of the note.
Reimplement std's thread parker on top of events on SGX
Mutex and Condvar are being replaced by more efficient implementations, which need thread parking themselves (see #93740). Therefore, the generic `Parker` needs to be replaced on all platforms where the new lock implementation will be used.
SGX enclaves have a per-thread event state, which allows waiting for and setting specific bits. This is already used by the current mutex implementation. The thread parker can however be much more efficient, as it only needs to store the `TCS` address of one thread. This address is stored in a state variable, which can also be set to indicate the thread was already notified.
`park_timeout` does not guard against spurious wakeups like the current condition variable does. This is allowed by the API of `Parker`, and I think it is better to let users handle these wakeups themselves as the guarding is quite expensive and might not be necessary.
`@jethrogb` as you wrote the initial SGX support for `std`, I assume you are the target maintainer? Could you help me test this, please? Lacking a x86_64 chip, I can't run SGX.
They *are* representable by traits, even if the short-circuiting
behaviour requires a different approach than the non-short-circuiting
operators. For an example proposal, see the postponed RFC 2722.
As it is not accurate, reword the note.
Make `VecDeque::from_iter` O(1) from `vec(_deque)::IntoIter`
As suggested in https://github.com/rust-lang/rust/pull/105046#issuecomment-1330371695 by
r? ``@the8472``
`Vec` & `VecDeque`'s `IntoIter`s own the allocations, and even if advanced can be turned into `VecDeque`s in O(1).
This is just a specialization, not an API or doc commitment, so I don't think it needs an FCP.
attempt to clarify align_to docs
This is not intended the change the docs at all, but `@workingjubilee` said the current docs are incomprehensible to some people so this is an attempt to fix that. No idea if it helps, so -- feedback welcome.
(Please let's not use this to discuss *changing* the spec. Whoever wants to change the spec should please make a separate PR for that.)
Fix warning when libcore is compiled with no_fp_fmt_parse
Discovered when trying to compile Rust-for-Linux with Rust 1.66 beta.
It'll be helpful if this is backported to beta (should be trivial enough for backporting), so Rust-for-Linux's rust version bump wouldn't need to do `--cap-lints allow` for libcore.
kmc-solid: `std::sys` code maintenance
Includes a set of changes to fix the [`*-kmc-solid_*`](https://doc.rust-lang.org/nightly/rustc/platform-support/kmc-solid.html) Tier 3 targets and make some other improvements.
- Address `fuzzy_provenance_casts` by using `expose_addr` and `from_exposed_addr` for pointer-integer casts
- Add a stub implementation of `is_terminal` (#98070)
- Address `unused_imports` and `unused_unsafe`
- Stop doing `Box::from_raw(&*(x: Box<T>) as *const T as *mut T)`
Ensure that heap allocation does not occur in a thread until std::thread
is ready. This fixes issues with custom allocators that call
std:🧵:current(), since doing so prematurely initializes
THREAD_INFO and causes the following thread_info::set() to fail.
Pass on null handle values to child process
Fixes#101645
In Windows, stdio handles are (semantically speaking) `Option<Handle>` where `Handle` is a non-zero value. When spawning a process with `Stdio::Inherit`, Rust currently turns zero values into `-1` values. This has the unfortunate effect of breaking console subprocesses (which typically need stdio) that are spawned from gui applications (that lack stdio by default) because the console process won't be assigned handles from the newly created console (as they usually would in that situation). Worse, `-1` is actually [a valid handle](https://doc.rust-lang.org/std/os/windows/io/struct.OwnedHandle.html) which means "the current process". So if a console process, for example, waits on stdin and it has a `-1` value then the process will end up waiting on itself.
This PR fixes it by propagating the nulls instead of converting them to `-1`.
While I think the current behaviour is a mistake, changing it (however justified) is an API change so I think this PR should at least have some input from t-libs-api. So choosing at random...
r? `@joshtriplett`
Replace usage of `ResumeTy` in async lowering with `Context`
Replaces using `ResumeTy` / `get_context` in favor of using `&'static mut Context<'_>`.
Usage of the `'static` lifetime here is technically "cheating", and replaces the raw pointer in `ResumeTy` and the `get_context` fn that pulls the correct lifetimes out of thin air.
fixes https://github.com/rust-lang/rust/issues/104828 and https://github.com/rust-lang/rust/pull/104321#issuecomment-1336363077
r? `@oli-obk`
remove no-op 'let _ = '
Also see the discussion at https://github.com/rust-lang/rust/pull/93563#discussion_r1034057555.
I don't know why these `Drop` implementations exist to begin with, given that their body does literally nothing, but did not want to change that. (It might affect dropck.)
Cc `````@ibraheemdev````` `````@Amanieu`````
Commit 77005950f0 implemented masking of
FileType to fix an issue[^1] in the semantic of FileType comparison.
This commit introduces masking to Hash to maintain the invariant that
x == y => hash(x) == hash(y).
[^1]: https://github.com/rust-lang/rust/issues/104900
Replaces using `ResumeTy` / `get_context` in favor of using `&'static mut Context<'_>`.
Usage of the `'static` lifetime here is technically "cheating", and replaces
the raw pointer in `ResumeTy` and the `get_context` fn that pulls the
correct lifetimes out of thin air.
PartialEq: PERs are homogeneous
PartialEq claims that it corresponds to a PER, but that is only a well-defined statement when `Rhs == Self`. There is no standard notion of PER on a relation between two different sets/types. So move this out of the first paragraph and clarify this.
Send `VecDeque::from_iter` via `Vec::from_iter`
Since it's O(1) to convert between them now, might as well reuse the logic.
Mostly for the various specializations it does, but might also save some monomorphization work if, say, people collect slice iterators into both `Vec`s and `VecDeque`s.
Create a hacky fail-fast mode that stops tests at the first failure
This is useful for not having to wait until all 10k+ ui tests have finished running and then having to crawl through hundreds of failure reports.
You now only get the first report when you turn on that env var and no new tests are run at all
This works like a charm, but is obviously welded on very crudely
improve doc of into_boxed_slice and impl From<Vec<T>> for Box<[T]>
Improves description of `into_boxed_slice`, and adds example to `impl From<Vec<T>> for Box<[T]>`.
Fixes#98908
Adjust inlining attributes around panic_immediate_abort
The goal of `panic_immediate_abort` is to permit the panic runtime and formatting code paths to be optimized away. But while poking through some disassembly of a small program compiled with that option, I found that was not the case. Enabling LTO did address that specific issue, but enabling LTO is a steep price to pay for this feature doing its job.
This PR fixes that, by tweaking two things:
* All the slice indexing functions that we `const_eval_select` on get `#[inline]`. `objdump -dC` told me that originally some `_ct` functions could end up in an executable. I won't pretend to understand what's going on there.
* Normalize attributes across all `panic!` wrappers: use `inline(never) + cold` normally, and `inline` when `panic_immediate_abort` is enabled.
But also, with LTO and `panic_immediate_abort` enabled, this patch knocks ~709 kB out of the `.text` segment of `librustc_driver.so`. That is slightly surprising to me, my best theory is that this shifts some inlining earlier in compilation, enabling some subsequent optimizations. The size improvement of `librustc_driver.so` with `panic_immediate_abort` due to this patch is greater with LTO than without LTO, which I suppose backs up this theory.
I do not know how to test this. I would quite like to, because I think what this is solving was an accidental regression. This only works with `-Zbuild-std` which is a cargo flag, and thus can't be used in a rustc codegen test.
r? `@thomcc`
---
I do not seriously think anyone is going to use a compiler built with `panic_immediate_abort`, but I wanted a big complicated Rust program to try this out on, and the compiler is such.
