Id, attributes, inner nodes in source order if possible, tokens, span.
Also always use exhaustive matching in visiting infra, and visit some missing nodes.
Fix a span in `parse_ty_bare_fn`.
It currently goes one token too far.
Example: line 259 of `tests/ui/abi/compatibility.rs`:
```
test_abi_compatible!(fn_fn, fn(), fn(i32) -> i32);
```
This commit changes the span for the second element from `fn(),` to `fn()`, i.e. removes the extraneous comma.
This doesn't affect any tests. I found it while debugging some other code. Not a big deal but an easy fix so I figure it worth doing.
r? ``@spastorino``
It currently goes one token too far.
Example: line 259 of `tests/ui/abi/compatibility.rs`:
```
test_abi_compatible!(fn_fn, fn(), fn(i32) -> i32);
```
This commit changes the span for the second element from `fn(),` to
`fn()`, i.e. removes the extraneous comma.
Eliminate the distinction between PREC_POSTFIX and PREC_PAREN precedence level
I have been tangling with precedence as part of porting some pretty-printer improvements from syn back to rustc (related to parenthesization of closures, returns, and breaks by the AST pretty-printer).
As far as I have been able to tell, there is no difference between the 2 different precedence levels that rustc identifies as `PREC_POSTFIX` (field access, square bracket index, question mark, method call) and `PREC_PAREN` (loops, if, paths, literals).
There are a bunch of places that look at either `prec < PREC_POSTFIX` or `prec >= PREC_POSTFIX`. But there is nothing that needs to distinguish PREC_POSTFIX and PREC_PAREN from one another.
d49994b060/compiler/rustc_ast/src/util/parser.rs (L236-L237)d49994b060/compiler/rustc_hir_typeck/src/fn_ctxt/suggestions.rs (L2829)d49994b060/compiler/rustc_hir_typeck/src/fn_ctxt/suggestions.rs (L1290)
In the interest of eliminating a distinction without a difference, this PR collapses these 2 levels down to 1.
There is exactly 1 case where an expression with PREC_POSTFIX precedence needs to be parenthesized in a location that an expression with PREC_PAREN would not, and that's when the receiver of ExprKind::MethodCall is ExprKind::Field. `x.f()` means a different thing than `(x.f)()`. But this does not justify having separate precedence levels because this special case in the grammar is not governed by precedence. Field access does not have "lower precedence than" method call syntax — you can tell because if it did, then `x.f[0].f()` wouldn't be able to have its unparenthesized field access in the receiver of a method call. Because this Field/MethodCall special case is not governed by precedence, it already requires special handling and is not affected by eliminating the PREC_POSTFIX precedence level.
d49994b060/compiler/rustc_ast_pretty/src/pprust/state/expr.rs (L217-L221)
Just some extra sanity checking, making explicit some values not
possible in code working with token trees -- we shouldn't be seeing
explicit delimiter tokens, because they should be represented as
`TokenTree::Delimited`.
Merge `PatParam`/`PatWithOr`, and `Expr`/`Expr2021`, for a few reasons.
- It's conceptually nice, because the two pattern kinds and the two
expression kinds are very similar.
- With expressions in particular, there are several places where both
expression kinds get the same treatment.
- It removes one unreachable match arm.
- Most importantly, for #124141 I will need to introduce a new type
`MetaVarKind` that is very similar to `NonterminalKind`, but records a
couple of extra fields for expression metavars. It's nicer to have a
single `MetaVarKind::Expr` expression variant to hold those extra
fields instead of duplicating them across two variants
`MetaVarKind::{Expr,Expr2021}`. And then it makes sense for patterns
to be treated the same way, and for `NonterminalKind` to also be
treated the same way.
I also clarified the comments, because I have long found them a little
hard to understand.
`StaticForeignItem` and `StaticItem` are the same
The struct `StaticItem` and `StaticForeignItem` are the same, so remove `StaticForeignItem`. Having them be separate is unique to `static` items -- unlike `ForeignItemKind::{Fn,TyAlias}`, which use the normal AST item.
r? ``@spastorino`` or ``@oli-obk``
Make edition dependent `:expr` macro fragment act like the edition-dependent `:pat` fragment does
Parse the `:expr` fragment as `:expr_2021` in editions <=2021, and as `:expr` in edition 2024. This is similar to how we parse `:pat` as `:pat_param` in edition <=2018 and `:pat_with_or` in >=2021, and means we can get rid of a span dependency from `nonterminal_may_begin_with`.
Specifically, this fixes a theoretical regression since the `expr_2021` macro fragment previously would allow `const {}` if the *caller* is edition 2024. This is inconsistent with the way that the `pat` macro fragment was upgraded, and also leads to surprising behavior when a macro *caller* crate upgrades to edtion 2024, since they may have parsing changes that they never asked for (with no way of opting out of it).
This PR also allows using `expr_2021` in all editions. Why was this was disallowed in the first place? It's purely additive, and also it's still feature gated?
r? ```@fmease``` ```@eholk``` cc ```@vincenzopalazzo```
cc #123865
Tracking:
- https://github.com/rust-lang/rust/issues/123742
We currently use `can_begin_literal_maybe_minus` in a couple of places
where only string literals are allowed. This commit introduces a
more specific function, which makes things clearer. It doesn't change
behaviour because the two functions affected (`is_unsafe_foreign_mod`
and `check_keyword_case`) are always followed by a call to `parse_abi`,
which checks again for a string literal.
It's clearer this way, because the `Interpolated` cases in
`can_begin_const_arg` and `is_pat_range_end_start` are more permissive
than the `Interpolated` cases in `can_begin_literal_maybe_minus`.
Fix duplicated attributes on nonterminal expressions
This PR fixes a long-standing bug (#86055) whereby expression attributes can be duplicated when expanded through declarative macros.
First, consider how items are parsed in declarative macros:
```
Items:
- parse_nonterminal
- parse_item(ForceCollect::Yes)
- parse_item_
- attrs = parse_outer_attributes
- parse_item_common(attrs)
- maybe_whole!
- collect_tokens_trailing_token
```
The important thing is that the parsing of outer attributes is outside token collection, so the item's tokens don't include the attributes. This is how it's supposed to be.
Now consider how expression are parsed in declarative macros:
```
Exprs:
- parse_nonterminal
- parse_expr_force_collect
- collect_tokens_no_attrs
- collect_tokens_trailing_token
- parse_expr
- parse_expr_res(None)
- parse_expr_assoc_with
- parse_expr_prefix
- parse_or_use_outer_attributes
- parse_expr_dot_or_call
```
The important thing is that the parsing of outer attributes is inside token collection, so the the expr's tokens do include the attributes, i.e. in `AttributesData::tokens`.
This PR fixes the bug by rearranging expression parsing to that outer attribute parsing happens outside of token collection. This requires a number of small refactorings because expression parsing is somewhat complicated. While doing so the PR makes the code a bit cleaner and simpler, by eliminating `parse_or_use_outer_attributes` and `Option<AttrWrapper>` arguments (in favour of the simpler `parse_outer_attributes` and `AttrWrapper` arguments), and simplifying `LhsExpr`.
r? `@petrochenkov`
delegation: Implement glob delegation
Support delegating to all trait methods in one go.
Overriding globs with explicit definitions is also supported.
The implementation is generally based on the design from https://github.com/rust-lang/rfcs/pull/3530#issuecomment-2020869823, but unlike with list delegation in https://github.com/rust-lang/rust/pull/123413 we cannot expand glob delegation eagerly.
We have to enqueue it into the queue of unexpanded macros (most other macros are processed this way too), and then a glob delegation waits in that queue until its trait path is resolved, and enough code expands to generate the identifier list produced from the glob.
Glob delegation is only allowed in impls, and can only point to traits.
Supporting it in other places gives very little practical benefit, but significantly raises the implementation complexity.
Part of https://github.com/rust-lang/rust/issues/118212.
We already do this for a number of crates, e.g. `rustc_middle`,
`rustc_span`, `rustc_metadata`, `rustc_span`, `rustc_errors`.
For the ones we don't, in many cases the attributes are a mess.
- There is no consistency about order of attribute kinds (e.g.
`allow`/`deny`/`feature`).
- Within attribute kind groups (e.g. the `feature` attributes),
sometimes the order is alphabetical, and sometimes there is no
particular order.
- Sometimes the attributes of a particular kind aren't even grouped
all together, e.g. there might be a `feature`, then an `allow`, then
another `feature`.
This commit extends the existing sorting to all compiler crates,
increasing consistency. If any new attribute line is added there is now
only one place it can go -- no need for arbitrary decisions.
Exceptions:
- `rustc_log`, `rustc_next_trait_solver` and `rustc_type_ir_macros`,
because they have no crate attributes.
- `rustc_codegen_gcc`, because it's quasi-external to rustc (e.g. it's
ignored in `rustfmt.toml`).
Parse unsafe attributes
Initial parse implementation for #123757
This is the initial work to parse unsafe attributes, which is represented as an extra `unsafety` field in `MetaItem` and `AttrItem`. There's two areas in the code where it appears that parsing is done manually and not using the parser stuff, and I'm not sure how I'm supposed to thread the change there.
Rename HIR `TypeBinding` to `AssocItemConstraint` and related cleanup
Rename `hir::TypeBinding` and `ast::AssocConstraint` to `AssocItemConstraint` and update all items and locals using the old terminology.
Motivation: The terminology *type binding* is extremely outdated. "Type bindings" not only include constraints on associated *types* but also on associated *constants* (feature `associated_const_equality`) and on RPITITs of associated *functions* (feature `return_type_notation`). Hence the word *item* in the new name. Furthermore, the word *binding* commonly refers to a mapping from a binder/identifier to a "value" for some definition of "value". Its use in "type binding" made sense when equality constraints (e.g., `AssocTy = Ty`) were the only kind of associated item constraint. Nowadays however, we also have *associated type bounds* (e.g., `AssocTy: Bound`) for which the term *binding* doesn't make sense.
---
Old terminology (HIR, rustdoc):
```
`TypeBinding`: (associated) type binding
├── `Constraint`: associated type bound
└── `Equality`: (associated) equality constraint (?)
├── `Ty`: (associated) type binding
└── `Const`: associated const equality (constraint)
```
Old terminology (AST, abbrev.):
```
`AssocConstraint`
├── `Bound`
└── `Equality`
├── `Ty`
└── `Const`
```
New terminology (AST, HIR, rustdoc):
```
`AssocItemConstraint`: associated item constraint
├── `Bound`: associated type bound
└── `Equality`: associated item equality constraint OR associated item binding (for short)
├── `Ty`: associated type equality constraint OR associated type binding (for short)
└── `Const`: associated const equality constraint OR associated const binding (for short)
```
r? compiler-errors
Disallow cast with trailing braced macro in let-else
This fixes an edge case I noticed while porting #118880 and #119062 to syn.
Previously, rustc incorrectly accepted code such as:
```rust
let foo = &std::ptr::null as &'static dyn std::ops::Fn() -> *const primitive! {
8
} else {
return;
};
```
even though a right curl brace `}` directly before `else` in a `let...else` statement is not supposed to be valid syntax.
Move `#[do_not_recommend]` to the `#[diagnostic]` namespace
This commit moves the `#[do_not_recommend]` attribute to the `#[diagnostic]` namespace. It still requires
`#![feature(do_not_recommend)]` to work.
r? `@compiler-errors`
Rename Unsafe to Safety
Alternative to #124455, which is to just have one Safety enum to use everywhere, this opens the posibility of adding `ast::Safety::Safe` that's useful for unsafe extern blocks.
This leaves us today with:
```rust
enum ast::Safety {
Unsafe(Span),
Default,
// Safe (going to be added for unsafe extern blocks)
}
enum hir::Safety {
Unsafe,
Safe,
}
```
We would convert from `ast::Safety::Default` into the right Safety level according the context.
Improve parser
Fixes#124935.
- Add a few more help diagnostics to incorrect semicolons
- Overall improved that function
- Addded a few comments
- Renamed diff_marker fns to git_diff_marker
Update `expr` matcher for Edition 2024 and add `expr_2021` nonterminal
This commit adds a new nonterminal `expr_2021` in macro patterns, and `expr_fragment_specifier_2024` feature flag.
This change also updates `expr` so that on Edition 2024 it will also match `const { ... }` blocks, while `expr_2021` preserves the current behavior of `expr`, matching expressions without `const` blocks.
Joint work with `@vincenzopalazzo.`
Issue #123742
The extra span is now recorded in the new `TokenKind::NtIdent` and
`TokenKind::NtLifetime`. These both consist of a single token, and so
there's no operator precedence problems with inserting them directly
into the token stream.
The other way to do this would be to wrap the ident/lifetime in invisible
delimiters, but there's a lot of code that assumes an interpolated
ident/lifetime fits in a single token, and changing all that code to work with
invisible delimiters would have been a pain. (Maybe it could be done in a
follow-up.)
This change might not seem like much of a win, but it's a first step toward the
much bigger and long-desired removal of `Nonterminal` and
`TokenKind::Interpolated`. That change is big and complex enough that it's
worth doing this piece separately. (Indeed, this commit is based on part of a
late commit in #114647, a prior attempt at that big and complex change.)
This commit adds a new nonterminal `expr_2021` in macro patterns, and
`expr_fragment_specifier_2024` feature flag. For now, `expr` and
`expr_2021` are treated the same, but in future PRs we will update
`expr` to match to new grammar.
Co-authored-by: Vincezo Palazzo <vincenzopalazzodev@gmail.com>
This span records the declaration of the metavariable in the LHS of the macro.
It's used in a couple of error messages. Unfortunately, it gets in the way of
the long-term goal of removing `TokenKind::Interpolated`. So this commit
removes it, which degrades a couple of (obscure) error messages but makes
things simpler and enables the next commit.
This commit by itself is supposed to have no effect on behavior. All of
the call sites are updated to preserve their previous behavior.
The behavior changes are in the commits that follow.
For each of these, we need to decide whether they need to be using
`expr_requires_semi_to_be_stmt`, or `expr_requires_comma_to_be_match_arm`,
which are supposed to be 2 different behaviors. Previously they were
conflated into one, causing either too much or too little
parenthesization.
The starting point for this was identical comments on two different
fields, in `ast::VariantData::Struct` and `hir::VariantData::Struct`:
```
// FIXME: investigate making this a `Option<ErrorGuaranteed>`
recovered: bool
```
I tried that, and then found that I needed to add an `ErrorGuaranteed`
to `Recovered::Yes`. Then I ended up using `Recovered` instead of
`Option<ErrorGuaranteed>` for these two places and elsewhere, which
required moving `ErrorGuaranteed` from `rustc_parse` to `rustc_ast`.
This makes things more consistent, because `Recovered` is used in more
places, and there are fewer uses of `bool` and
`Option<ErrorGuaranteed>`. And safer, because it's difficult/impossible
to set `recovered` to `Recovered::Yes` without having emitted an error.
Remove braces when fixing a nested use tree into a single item
[Back in 2019](https://github.com/rust-lang/rust/pull/56645) I added rustfix support for the `unused_imports` lint, to automatically remove them when running `cargo fix`. For the most part this worked great, but when removing all but one childs of a nested use tree it turned `use foo::{Unused, Used}` into `use foo::{Used}`. This is slightly annoying, because it then requires you to run `rustfmt` to get `use foo::Used`.
This PR automatically removes braces and the surrouding whitespace when all but one child of a nested use tree are unused. To get it done I had to add the span of the nested use tree to the AST, and refactor a bit the code I wrote back then.
A thing I noticed is, there doesn't seem to be any `//@ run-rustfix` test for fixing the `unused_imports` lint. I created a test in `tests/suggestions` (is that the right directory?) that for now tests just what I added in the PR. I can followup in a separate PR to add more tests for fixing `unused_lints`.
This PR is best reviewed commit-by-commit.
Improve `rustc_parse::Parser`'s debuggability
The main event is the final commit where I add `Parser::debug_lookahead`. Everything else was basically cleaning up things that bugged me (debugging, as it were) until I felt comfortable enough to actually work on it.
The motivation is that it's annoying as hell to try to figure out how the debug infra works in rustc without having basic queries like `debug!(?parser);` come up "empty". However, Parser has a lot of fields that are mostly irrelevant for most debugging, like the entire ParseSess. I think `Parser::debug_lookahead` with a capped lookahead might be fine as a general-purpose Debug impl, but this adapter version was suggested to allow more choice, and admittedly, it's a refined version of what I was already handrolling just to get some insight going.
This moves some code around and adds some documentation comments to make
it easier to understand what's going on with the entrypoint logic, which
is a bit complicated.
The only change in behavior is consolidating the error messages for
unix_sigpipe to make the code slightly simpler.
Remove many `#[macro_use] extern crate foo` items
This requires the addition of more `use` items, which often make the code more verbose. But they also make the code easier to read, because `#[macro_use]` obscures where macros are defined.
r? `@fee1-dead`
It's a highly misleading name, because it's completely different to
`MetaItem::name_value_literal`. Specifically, it doesn't match
`MetaItemKind::NameValue` (e.g. `#[foo = 3]`), it matches
`MetaItemKind::List` (e.g. `#[foo(3)]`).
Implement syntax for `impl Trait` to specify its captures explicitly (`feature(precise_capturing)`)
Implements `impl use<'a, 'b, T, U> Sized` syntax that allows users to explicitly list the captured parameters for an opaque, rather than inferring it from the opaque's bounds (or capturing *all* lifetimes under 2024-edition capture rules). This allows us to exclude some implicit captures, so this syntax may be used as a migration strategy for changes due to #117587.
We represent this list of captured params as `PreciseCapturingArg` in AST and HIR, resolving them between `rustc_resolve` and `resolve_bound_vars`. Later on, we validate that the opaques only capture the parameters in this list.
We artificially limit the feature to *require* mentioning all type and const parameters, since we don't currently have support for non-lifetime bivariant generics. This can be relaxed in the future.
We also may need to limit this to require naming *all* lifetime parameters for RPITIT, since GATs have no variance. I have to investigate this. This can also be relaxed in the future.
r? `@oli-obk`
Tracking issue:
- https://github.com/rust-lang/rust/issues/123432
Cleanup: Rename `ModSep` to `PathSep`
`::` is usually referred to as the *path separator* (citation needed).
The existing name `ModSep` for *module separator* is a bit misleading since it in fact separates the segments of arbitrary path segments, not only ones resolving to modules. Let me just give a shout-out to associated items (`T::Assoc`, `<Ty as Trait>::function`) and enum variants (`Option::None`).
Motivation: Reduce friction for new contributors, prevent potential confusion.
cc `@petrochenkov`
r? nnethercote or compiler
Check `x86_64` size assertions on `aarch64`, too
(Context: https://rust-lang.zulipchat.com/#narrow/stream/131828-t-compiler/topic/Checking.20size.20assertions.20on.20aarch64.3F)
Currently the compiler has around 30 sets of `static_assert_size!` for various size-critical data structures (e.g. various IR nodes), guarded by `#[cfg(all(target_arch = "x86_64", target_pointer_width = "64"))]`.
(Presumably this cfg avoids having to maintain separate size values for 32-bit targets and unusual 64-bit targets. Apparently it may have been necessary before the i128/u128 alignment changes, too.)
This is slightly incovenient for people on aarch64 workstations (e.g. Macs), because the assertions normally aren't checked until we push to a PR. So this PR adds `aarch64` to the `#[cfg(..)]` guarding all of those assertions in the compiler.
---
Implemented with a simple find/replace. Verified by manually inspecting each `static_assert_size!` in `compiler/`, and checking that either the replacement succeeded, or adding aarch64 wouldn't have been appropriate.
More postfix match fixes
These affect diagnostics only, as far as I can tell. I'm too lazy to come up with UI tests, but I could be convinced otherwise.
Specifically, I think changing the precedence computation actually doesn't change anything, but tweaking `contains_exterior_struct_lit` does mean that some diagnostics will begin parenthesizing `S {}.match {}`.
Experimental feature postfix match
This has a basic experimental implementation for the RFC postfix match (rust-lang/rfcs#3295, #121618). [Liaison is](https://rust-lang.zulipchat.com/#narrow/stream/213817-t-lang/topic/Postfix.20Match.20Liaison/near/423301844) ```@scottmcm``` with the lang team's [experimental feature gate process](https://github.com/rust-lang/lang-team/blob/master/src/how_to/experiment.md).
This feature has had an RFC for a while, and there has been discussion on it for a while. It would probably be valuable to see it out in the field rather than continue discussing it. This feature also allows to see how popular postfix expressions like this are for the postfix macros RFC, as those will take more time to implement.
It is entirely implemented in the parser, so it should be relatively easy to remove if needed.
This PR is split in to 5 commits to ease review.
1. The implementation of the feature & gating.
2. Add a MatchKind field, fix uses, fix pretty.
3. Basic rustfmt impl, as rustfmt crashes upon seeing this syntax without a fix.
4. Add new MatchSource to HIR for Clippy & other HIR consumers
Several (doc) comments were super outdated or didn't provide enough context.
Some doc comments shoved everything in a single paragraph without respecting
the fact that the first paragraph should be a single sentence because rustdoc
treats these as item descriptions / synopses on module pages.
Implement macro-based deref!() syntax for deref patterns
Stop using `box PAT` syntax for deref patterns, and instead use a perma-unstable macro.
Blocked on #122222
r? `@Nadrieril`
It uses very old language that is more confusing today than helpful,
including references to `SubstNt` that no longer exists. The comment
above `TokenStream` is better, and suffices for a basic understanding of
these types.
various clippy fixes
We need to keep the order of the given clippy lint rules before passing them.
Since clap doesn't offer any useful interface for this purpose out of the box,
we have to handle it manually.
Additionally, this PR makes `-D` rules work as expected. Previously, lint rules were limited to `-W`. By enabling `-D`, clippy began to complain numerous lines in the tree, all of which have been resolved in this PR as well.
Fixes#121481
cc `@matthiaskrgr`
Stabilize associated type bounds (RFC 2289)
This PR stabilizes associated type bounds, which were laid out in [RFC 2289]. This gives us a shorthand to express nested type bounds that would otherwise need to be expressed with nested `impl Trait` or broken into several `where` clauses.
### What are we stabilizing?
We're stabilizing the associated item bounds syntax, which allows us to put bounds in associated type position within other bounds, i.e. `T: Trait<Assoc: Bounds...>`. See [RFC 2289] for motivation.
In all position, the associated type bound syntax expands into a set of two (or more) bounds, and never anything else (see "How does this differ[...]" section for more info).
Associated type bounds are stabilized in four positions:
* **`where` clauses (and APIT)** - This is equivalent to breaking up the bound into two (or more) `where` clauses. For example, `where T: Trait<Assoc: Bound>` is equivalent to `where T: Trait, <T as Trait>::Assoc: Bound`.
* **Supertraits** - Similar to above, `trait CopyIterator: Iterator<Item: Copy> {}`. This is almost equivalent to breaking up the bound into two (or more) `where` clauses; however, the bound on the associated item is implied whenever the trait is used. See #112573/#112629.
* **Associated type item bounds** - This allows constraining the *nested* rigid projections that are associated with a trait's associated types. e.g. `trait Trait { type Assoc: Trait2<Assoc2: Copy>; }`.
* **opaque item bounds (RPIT, TAIT)** - This allows constraining associated types that are associated with the opaque without having to *name* the opaque. For example, `impl Iterator<Item: Copy>` defines an iterator whose item is `Copy` without having to actually name that item bound.
The latter three are not expressible in surface Rust (though for associated type item bounds, this will change in #120752, which I don't believe should block this PR), so this does represent a slight expansion of what can be expressed in trait bounds.
### How does this differ from the RFC?
Compared to the RFC, the current implementation *always* desugars associated type bounds to sets of `ty::Clause`s internally. Specifically, it does *not* introduce a position-dependent desugaring as laid out in [RFC 2289], and in particular:
* It does *not* desugar to anonymous associated items in associated type item bounds.
* It does *not* desugar to nested RPITs in RPIT bounds, nor nested TAITs in TAIT bounds.
This position-dependent desugaring laid out in the RFC existed simply to side-step limitations of the trait solver, which have mostly been fixed in #120584. The desugaring laid out in the RFC also added unnecessary complication to the design of the feature, and introduces its own limitations to, for example:
* Conditionally lowering to nested `impl Trait` in certain positions such as RPIT and TAIT means that we inherit the limitations of RPIT/TAIT, namely lack of support for higher-ranked opaque inference. See this code example: https://github.com/rust-lang/rust/pull/120752#issuecomment-1979412531.
* Introducing anonymous associated types makes traits no longer object safe, since anonymous associated types are not nameable, and all associated types must be named in `dyn` types.
This last point motivates why this PR is *not* stabilizing support for associated type bounds in `dyn` types, e.g, `dyn Assoc<Item: Bound>`. Why? Because `dyn` types need to have *concrete* types for all associated items, this would necessitate a distinct lowering for associated type bounds, which seems both complicated and unnecessary compared to just requiring the user to write `impl Trait` themselves. See #120719.
### Implementation history:
Limited to the significant behavioral changes and fixes and relevant PRs, ping me if I left something out--
* #57428
* #108063
* #110512
* #112629
* #120719
* #120584Closes#52662
[RFC 2289]: https://rust-lang.github.io/rfcs/2289-associated-type-bounds.html
`f16` and `f128` step 3: compiler support & feature gate
Continuation of https://github.com/rust-lang/rust/pull/121841, another portion of https://github.com/rust-lang/rust/pull/114607
This PR exposes the new types to the world and adds a feature gate. Marking this as a draft because I need some feedback on where I did the feature gate check. It also does not yet catch type via suffixed literals (so the feature gate test will fail, probably some others too because I haven't belssed).
If there is a better place to check all types after resolution, I can do that. If not, I figure maybe I can add a second gate location in AST when it checks numeric suffixes.
Unfortunately I still don't think there is much testing to be done for correctness (codegen tests or parsed value checks) until we have basic library support. I think that will be the next step.
Tracking issue: https://github.com/rust-lang/rust/issues/116909
r? `@compiler-errors`
cc `@Nilstrieb`
`@rustbot` label +F-f16_and_f128
Add asm goto support to `asm!`
Tracking issue: #119364
This PR implements asm-goto support, using the syntax described in "future possibilities" section of [RFC2873](https://rust-lang.github.io/rfcs/2873-inline-asm.html#asm-goto).
Currently I have only implemented the `label` part, not the `fallthrough` part (i.e. fallthrough is implicit). This doesn't reduce the expressive though, since you can use label-break to get arbitrary control flow or simply set a value and rely on jump threading optimisation to get the desired control flow. I can add that later if deemed necessary.
r? ``@Amanieu``
cc ``@ojeda``
Rollup of 9 pull requests
Successful merges:
- #121065 (Add basic i18n guidance for `Display`)
- #121744 (Stop using Bubble in coherence and instead emulate it with an intercrate check)
- #121829 (Dummy tweaks (attempt 2))
- #121857 (Implement async closure signature deduction)
- #121894 (const_eval_select: make it safe but be careful with what we expose on stable for now)
- #122014 (Change some attributes to only_local.)
- #122016 (will_wake tests fail on Miri and that is expected)
- #122018 (only set noalias on Box with the global allocator)
- #122028 (Remove some dead code)
r? `@ghost`
`@rustbot` modify labels: rollup
They are two different ways of creating dummy results, with two
different purposes. Their implementations are separate except for
crates, where `DummyResult` depends on `DummyAstNode`.
This commit removes that dependency, so they are now fully separate. It
also expands the comment on `DummyAstNode`.
`f16` and `f128` step 2: intrinsics
Continuation of https://github.com/rust-lang/rust/pull/121728, another portion of https://github.com/rust-lang/rust/pull/114607.
This PR adds `f16` and `f128` intrinsics, and hooks them up to both HIR and LLVM. This is all still unexposed to the frontend, which will probably be the next step. Also update itanium mangling per `@rcvalle's` in https://github.com/rust-lang/rust/pull/121728/files#r1506570300, and fix a typo from step 1.
Once these types are usable in code, I will add the codegen tests from #114607 (codegen is passing on that branch)
This does add more `unimplemented!`s to Clippy, but I still don't think we can do better until library support is added.
r? `@compiler-errors`
cc `@Nilstrieb`
`@rustbot` label +T-compiler +F-f16_and_f128
Detect more cases of `=` to `:` typo
When a `Local` is fully parsed, but not followed by a `;`, keep the `:` span arround and mention it. If the type could continue being parsed as an expression, suggest replacing the `:` with a `=`.
```
error: expected one of `!`, `+`, `->`, `::`, `;`, or `=`, found `.`
--> file.rs:2:32
|
2 | let _: std::env::temp_dir().join("foo");
| - ^ expected one of `!`, `+`, `->`, `::`, `;`, or `=`
| |
| while parsing the type for `_`
| help: use `=` if you meant to assign
```
Fix#119665.
When a `Local` is fully parsed, but not followed by a `;`, keep the `:` span
arround and mention it. If the type could continue being parsed as an
expression, suggest replacing the `:` with a `=`.
```
error: expected one of `!`, `+`, `->`, `::`, `;`, or `=`, found `.`
--> file.rs:2:32
|
2 | let _: std::env::temp_dir().join("foo");
| - ^ expected one of `!`, `+`, `->`, `::`, `;`, or `=`
| |
| while parsing the type for `_`
| help: use `=` if you meant to assign
```
Fix#119665.
Add an ErrorGuaranteed to ast::TyKind::Err (attempt 2)
This makes it more like `hir::TyKind::Err`, and avoids a `has_errors` assertion in `LoweringContext::lower_ty_direct`.
r? ```@oli-obk```
This mostly works well, and eliminates a couple of delayed bugs.
One annoying thing is that we should really also add an
`ErrorGuaranteed` to `proc_macro::bridge::LitKind::Err`. But that's
difficult because `proc_macro` doesn't have access to `ErrorGuaranteed`,
so we have to fake it.
`cook_lexer_literal` can emit an error about an invalid int literal but
then return a non-`Err` token. And then `integer_lit` has to account for
this to avoid printing a redundant error message.
This commit changes `cook_lexer_literal` to return `Err` in that case.
Then `integer_lit` doesn't need the special case, and
`LitError::LexerError` can be removed.
