Prefer doc comments over `//`-comments in compiler
Doc comments are generally nicer: they show up in the documentation, they are shown in IDEs when you hover other mentions of items, etc. Thus it makes sense to use them instead of `//`-comments.
Remove redundant `all` in cfg
This appears to have been accidentally left in after removing the other branches 45bf1ed1a1
(hat tip to kangalioo for the git archaeology)
Previously, async constructs would be lowered to "normal" generators,
with an additional `from_generator` / `GenFuture` shim in between to
convert from `Generator` to `Future`.
The compiler will now special-case these generators internally so that
async constructs will *directly* implement `Future` without the need
to go through the `from_generator` / `GenFuture` shim.
The primary motivation for this change was hiding this implementation
detail in stack traces and debuginfo, but it can in theory also help
the optimizer as there is less abstractions to see through.
Use `as_deref` in compiler (but only where it makes sense)
This simplifies some code :3
(there are some changes that are not exacly `as_deref`, but more like "clever `Option`/`Result` method use")
Support using `Self` or projections inside an RPIT/async fn
I reuse the same idea as https://github.com/rust-lang/rust/pull/103449 to use variances to encode whether a lifetime parameter is captured by impl-trait.
The current implementation of async and RPIT replace all lifetimes from the parent generics by `'static`. This PR changes the scheme
```rust
impl<'a> Foo<'a> {
fn foo<'b, T>() -> impl Into<Self> + 'b { ... }
}
opaque Foo::<'_a>::foo::<'_b, T>::opaque<'b>: Into<Foo<'_a>> + 'b;
impl<'a> Foo<'a> {
// OLD
fn foo<'b, T>() -> Foo::<'static>::foo::<'static, T>::opaque::<'b> { ... }
^^^^^^^ the `Self` becomes `Foo<'static>`
// NEW
fn foo<'b, T>() -> Foo::<'a>::foo::<'b, T>::opaque::<'b> { ... }
^^ the `Self` stays `Foo<'a>`
}
```
There is the same issue with projections. In the example, substitute `Self` by `<T as Trait<'b>>::Assoc` in the sugared version, and `Foo<'_a>` by `<T as Trait<'_b>>::Assoc` in the desugared one.
This allows to support `Self` in impl-trait, since we do not replace lifetimes by `'static` any more. The same trick allows to use projections like `T::Assoc` where `Self` is allowed. The feature is gated behind a `impl_trait_projections` feature gate.
The implementation relies on 2 tweaking rules for opaques in 2 places:
- we only relate substs that correspond to captured lifetimes during TypeRelation;
- we only list captured lifetimes in choice region computation.
For simplicity, I encoded the "capturedness" of lifetimes as a variance, `Bivariant` vs `Invariant` for unused vs captured lifetimes. The `variances_of` query used to ICE for opaques.
Impl-trait that do not reference `Self` or projections will have their variances as:
- `o` (invariant) for each parent type or const;
- `*` (bivariant) for each parent lifetime --> will not participate in borrowck;
- `o` (invariant) for each own lifetime.
Impl-trait that does reference `Self` and/or projections will have some parent lifetimes marked as `o` (as the example above), and participate in type relation and borrowck. In the example above, `variances_of(opaque) = ['_a: o, '_b: *, T: o, 'b: o]`.
r? types
cc `@compiler-errors` , as you asked about the issue with `Self` and projections.
Add `rustc_deny_explicit_impl`
Also adjust `E0322` error message to be more general, since it's used for `DiscriminantKind` and `Pointee` as well.
Also add `rustc_deny_explicit_impl` on the `Tuple` and `Destruct` marker traits.
Remove unused symbols and diagnostic items
As the title suggests, this removes unused symbols from `sym::` and `#[rustc_diagnostic_item]` annotations that weren't mentioned anywhere.
Originally I tried to use grep, to find symbols and item names that are never mentioned via `sym::name`, however this produced a lot of false positives (?), for example clippy matching on `Symbol::as_str` or macros "implicitly" adding `sym::`. I ended up fixing all these false positives (?) by hand, but tbh I'm not sure if it was worth it...
Add the `#[derive_const]` attribute
Closes#102371. This is a minimal patchset for the attribute to work. There are no restrictions on what traits this attribute applies to.
r? `````@oli-obk`````
Add support for custom mir
This implements rust-lang/compiler-team#564 . Details about the design, motivation, etc. can be found in there.
r? ```@oli-obk```
Avoid possible infinite loop when next_point reaching the end of file
Fixes#103451
If we return a span with `lo` = `hi`, `span_to_snippet` will always get `Ok("")`, which may introduce infinite loop if we don't care.
This PR make `find_width_of_character_at_span` return `width` with 1, so that `span_to_snippet` will get an `Err`.
Enable varargs support for calling conventions other than C or cdecl
This patch makes it possible to use varargs for calling conventions,
which are either based on C (efiapi) or C is based on them (sysv64 and win64).
Also pinging ``@phlopsi,`` because he noticed first this oversight when writing a library for UEFI.
Allow `impl Fn() -> impl Trait` in return position
_This was originally proposed as part of #93082 which was [closed](https://github.com/rust-lang/rust/pull/93082#issuecomment-1027225715) due to allowing `impl Fn() -> impl Trait` in argument position._
This allows writing the following function signatures:
```rust
fn f0() -> impl Fn() -> impl Trait;
fn f3() -> &'static dyn Fn() -> impl Trait;
```
These signatures were already allowed for common traits and associated types, there is no reason why `Fn*` traits should be special in this regard.
`impl Trait` in both `f0` and `f3` means "new existential type", just like with `-> impl Iterator<Item = impl Trait>` and such.
Arrow in `impl Fn() ->` is right-associative and binds from right to left, it's tested by [this test](a819fecb8d/src/test/ui/impl-trait/impl_fn_associativity.rs).
There even is a test that `f0` compiles:
2f004d2d40/src/test/ui/impl-trait/nested_impl_trait.rs (L25-L28)
But it was changed in [PR 48084 (lines)](https://github.com/rust-lang/rust/pull/48084/files#diff-ccecca938872d65ffe8cd1c3ef1956e309fac83bcda547d8b16b89257e53a437R37) to test the opposite, probably unintentionally given [PR 48084 (lines)](https://github.com/rust-lang/rust/pull/48084/files#diff-5a02f1ed43debed1fd24f7aad72490064f795b9420f15d847bac822aa4621a1cR476-R477).
r? `@nikomatsakis`
----
This limitation is especially annoying with async code, since it forces one to write this:
```rust
trait AsyncFn3<A, B, C>: Fn(A, B, C) -> <Self as AsyncFn3<A, B, C>>::Future {
type Future: Future<Output = Self::Out>;
type Out;
}
impl<A, B, C, Fut, F> AsyncFn3<A, B, C> for F
where
F: Fn(A, B, C) -> Fut,
Fut: Future,
{
type Future = Fut;
type Out = Fut::Output;
}
fn async_closure() -> impl AsyncFn3<i32, i32, i32, Out = u32> {
|a, b, c| async move { (a + b + c) as u32 }
}
```
Instead of:
```rust
fn async_closure() -> impl Fn(i32, i32, i32) -> impl Future<Output = u32> {
|a, b, c| async move { (a + b + c) as u32 }
}
```
Fix line numbers for MIR inlined code
`should_collapse_debuginfo` detects if the specified span is part of a
macro expansion however it does this by checking if the span is anything
other than a normal (non-expanded) kind, then the span sequence is
walked backwards to the root span.
This doesn't work when the MIR inliner inlines code as it creates spans
with expansion information set to `ExprKind::Inlined` and results in the
line number being attributed to the inline callsite rather than the
normal line number of the inlined code.
Fixes#103068
Shorten the `lookup_line` code slightly
The `match` looks like it's exactly the same as `checked_sub(1)`, so we might as well see if perf says we can just do that to save a couple lines.
This patch makes it possible to use varargs for calling conventions,
which are either based on C (like efiapi) or C is based
on them (for example sysv64 and win64).
Fix the bug of next_point in source_map
There is a bug in `next_point`, the new span won't move to next position when be called in the first time.
For this reason, our current code is working like this:
1. When we really want to move to the next position, we called two times of `next_point`
2. Some code which use `next_point` actually done the same thing with `shrink_to_hi`
This fix make sure when `next_point` is called, span will move with the width at least 1, and also work correctly in the scenario of multiple bytes.
Ref: https://github.com/rust-lang/rust/pull/103140#discussion_r997710998
r? `@davidtwco`
`should_collapse_debuginfo` detects if the specified span is part of a
macro expansion however it does this by checking if the span is anything
other than a normal (non-expanded) kind, then the span sequence is
walked backwards to the root span.
This doesn't work when the MIR inliner inlines code as it creates spans
with expansion information set to `ExprKind::Inlined` and results in the
line number being attributed to the inline callsite rather than the
normal line number of the inlined code.
Add missing documentation for FileNameDisplayPreference variants
Took me a while to find the information when I needed it so hopefully it should save some time for the next ones.
r? ``@thomcc``
