Don't require each rustc_interface tool to opt-in to parallel_compiler
Previously, forgetting to call `interface::set_thread_safe_mode` would cause the following ICE:
```
thread 'rustc' panicked at 'uninitialized dyn_thread_safe mode!', /rustc/dfe0683138de0959b6ab6a039b54d9347f6a6355/compiler/rustc_data_structures/src/sync.rs:74:18
```
This calls `set_thread_safe_mode` in `interface::run_compiler` to avoid requiring it in the caller.
Fixes `tests/run-make-fulldeps/issue-19371` when parallel-compiler is enabled.
r? `@SparrowLii` cc https://github.com/rust-lang/rust/issues/75760
Previously, forgetting to call `interface::set_thread_safe_mode` would cause the following ICE:
```
thread 'rustc' panicked at 'uninitialized dyn_thread_safe mode!', /rustc/dfe0683138de0959b6ab6a039b54d9347f6a6355/compiler/rustc_data_structures/src/sync.rs:74:18
```
This calls `set_thread_safe_mode` in `interface::run_compiler` to avoid requiring it in the caller.
Fixes `tests/run-make-fulldeps/issue-19371` when parallel-compiler is enabled.
Because `Lrc<Box<T>>` is silly. (Clippy warns about `Rc<Box<T>>` and
`Arc<Box<T>>`, and it would warn here if (a) we used Clippy with rustc,
and (b) Clippy knew about `Lrc`.)
There's no need to store it in `Queries`. We can just use a local
variable, because it's always used shortly after it's produced.
The commit also removes the `tcx.analysis()` call in `ongoing_codegen`,
because it's easy to ensure that's done beforehand.
All this makes the dataflow within `run_compiler` easier to follow, at
the cost of making one test slightly more verbose, which I think is a
good tradeoff.
Write to stdout if `-` is given as output file
With this PR, if `-o -` or `--emit KIND=-` is provided, output will be written to stdout instead. Binary output (those of type `obj`, `llvm-bc`, `link` and `metadata`) being written this way will result in an error unless stdout is not a tty. Multiple output types going to stdout will trigger an error too, as they will all be mixded together.
This implements https://github.com/rust-lang/compiler-team/issues/431
The idea behind the changes is to introduce an `OutFileName` enum that represents the output - be it a real path or stdout - and to use this enum along the code paths that handle different output types.
If `-o -` or `--emit KIND=-` is provided, output will be written
to stdout instead. Binary output (`obj`, `llvm-bc`, `link` and
`metadata`) being written this way will result in an error unless
stdout is not a tty. Multiple output types going to stdout will
trigger an error too, as they will all be mixded together.
Fix dependency tracking for debugger visualizers
This PR fixes dependency tracking for debugger visualizer files by changing the `debugger_visualizers` query to an `eval_always` query that scans the AST while it is still available. This way the set of visualizer files is already available when dep-info is emitted. Since the query is turned into an `eval_always` query, dependency tracking will now reliably detect changes to the visualizer script files themselves.
TODO:
- [x] perf.rlo
- [x] Needs a bit more documentation in some places
- [x] Needs regression test for the incr. comp. case
Fixes https://github.com/rust-lang/rust/issues/111226
Fixes https://github.com/rust-lang/rust/issues/111227
Fixes https://github.com/rust-lang/rust/issues/111295
r? `@wesleywiser`
cc `@gibbyfree`
Only depend on CFG_VERSION in rustc_interface
This avoids having to rebuild the whole compiler on each commit when `omit-git-hash = false`.
cc https://github.com/rust-lang/rust/issues/76720 - this won't fix it, and I'm not suggesting we turn this on by default, but it will make it less painful for people who do have `omit-git-hash` on as a workaround.
Error message all end up passing into a function as an `impl
Into<{D,Subd}iagnosticMessage>`. If an error message is creatd as
`&format("...")` that means we allocate a string (in the `format!`
call), then take a reference, and then clone (allocating again) the
reference to produce the `{D,Subd}iagnosticMessage`, which is silly.
This commit removes the leading `&` from a lot of these cases. This
means the original `String` is moved into the
`{D,Subd}iagnosticMessage`, avoiding the double allocations. This
requires changing some function argument types from `&str` to `String`
(when all arguments are `String`) or `impl
Into<{D,Subd}iagnosticMessage>` (when some arguments are `String` and
some are `&str`).
Use dynamic dispatch for queries
This replaces most concrete query values `V` with `MaybeUninit<[u8; { size_of::<V>() }]>` reducing the code instantiated by queries. The compile time of `rustc_query_impl` is reduced by 27%. It is an alternative to https://github.com/rust-lang/rust/pull/107937 which uses unstable const generics while this uses a `EraseType` trait which maps query values to their erased variant.
This is achieved by introducing an `Erased` type which does sanity check with `cfg(debug_assertions)`. The query caches gets instantiated with these erased types leaving the code in `rustc_query_system` unaware of them. `rustc_query_system` is changed to use instances of `QueryConfig` so that `rustc_query_impl` can pass in `DynamicConfig` which holds a pointer to a virtual table.
<table><tr><td rowspan="2">Benchmark</td><td colspan="1"><b>Before</b></th><td colspan="2"><b>After</b></th></tr><tr><td align="right">Time</td><td align="right">Time</td><td align="right">%</th></tr><tr><td>🟣 <b>clap</b>:check</td><td align="right">1.7055s</td><td align="right">1.6949s</td><td align="right"> -0.62%</td></tr><tr><td>🟣 <b>hyper</b>:check</td><td align="right">0.2547s</td><td align="right">0.2528s</td><td align="right"> -0.73%</td></tr><tr><td>🟣 <b>regex</b>:check</td><td align="right">0.9590s</td><td align="right">0.9553s</td><td align="right"> -0.39%</td></tr><tr><td>🟣 <b>syn</b>:check</td><td align="right">1.5457s</td><td align="right">1.5440s</td><td align="right"> -0.11%</td></tr><tr><td>🟣 <b>syntex_syntax</b>:check</td><td align="right">5.9092s</td><td align="right">5.9009s</td><td align="right"> -0.14%</td></tr><tr><td>Total</td><td align="right">10.3741s</td><td align="right">10.3479s</td><td align="right"> -0.25%</td></tr><tr><td>Summary</td><td align="right">1.0000s</td><td align="right">0.9960s</td><td align="right"> -0.40%</td></tr></table>
<table><tr><td rowspan="2">Benchmark</td><td colspan="1"><b>Before</b></th><td colspan="2"><b>After</b></th></tr><tr><td align="right">Time</td><td align="right">Time</td><td align="right">%</th></tr><tr><td>🟣 <b>clap</b>:check:initial</td><td align="right">2.0605s</td><td align="right">2.0575s</td><td align="right"> -0.15%</td></tr><tr><td>🟣 <b>hyper</b>:check:initial</td><td align="right">0.3218s</td><td align="right">0.3216s</td><td align="right"> -0.07%</td></tr><tr><td>🟣 <b>regex</b>:check:initial</td><td align="right">1.1848s</td><td align="right">1.1839s</td><td align="right"> -0.07%</td></tr><tr><td>🟣 <b>syn</b>:check:initial</td><td align="right">1.9409s</td><td align="right">1.9376s</td><td align="right"> -0.17%</td></tr><tr><td>🟣 <b>syntex_syntax</b>:check:initial</td><td align="right">7.3105s</td><td align="right">7.2928s</td><td align="right"> -0.24%</td></tr><tr><td>Total</td><td align="right">12.8185s</td><td align="right">12.7935s</td><td align="right"> -0.20%</td></tr><tr><td>Summary</td><td align="right">1.0000s</td><td align="right">0.9986s</td><td align="right"> -0.14%</td></tr></table>
<table><tr><td rowspan="2">Benchmark</td><td colspan="1"><b>Before</b></th><td colspan="2"><b>After</b></th></tr><tr><td align="right">Time</td><td align="right">Time</td><td align="right">%</th></tr><tr><td>🟣 <b>clap</b>:check:unchanged</td><td align="right">0.4606s</td><td align="right">0.4617s</td><td align="right"> 0.24%</td></tr><tr><td>🟣 <b>hyper</b>:check:unchanged</td><td align="right">0.1335s</td><td align="right">0.1336s</td><td align="right"> 0.08%</td></tr><tr><td>🟣 <b>regex</b>:check:unchanged</td><td align="right">0.3324s</td><td align="right">0.3346s</td><td align="right"> 0.65%</td></tr><tr><td>🟣 <b>syn</b>:check:unchanged</td><td align="right">0.6268s</td><td align="right">0.6307s</td><td align="right"> 0.64%</td></tr><tr><td>🟣 <b>syntex_syntax</b>:check:unchanged</td><td align="right">1.8248s</td><td align="right">1.8508s</td><td align="right">💔 1.43%</td></tr><tr><td>Total</td><td align="right">3.3779s</td><td align="right">3.4113s</td><td align="right"> 0.99%</td></tr><tr><td>Summary</td><td align="right">1.0000s</td><td align="right">1.0061s</td><td align="right"> 0.61%</td></tr></table>
It's based on https://github.com/rust-lang/rust/pull/108167.
r? `@cjgillot`
Introduce `DynSend` and `DynSync` auto trait for parallel compiler
part of parallel-rustc #101566
This PR introduces `DynSend / DynSync` trait and `FromDyn / IntoDyn` structure in rustc_data_structure::marker. `FromDyn` can dynamically check data structures for thread safety when switching to parallel environments (such as calling `par_for_each_in`). This happens only when `-Z threads > 1` so it doesn't affect single-threaded mode's compile efficiency.
r? `@cjgillot`
Fix mishandled `--check-cfg` arguments order
This PR fixes a bug in `--check-cfg` where the order of `--check-cfg=names(a)` and `--check-cfg=values(a,…)` would trip the compiler.
Fixes https://github.com/rust-lang/rust/issues/111291
cc `@taiki-e` `@petrochenkov`
Add `force` option for `--extern` flag
When `--extern force:foo=libfoo.so` is passed to `rustc` and `foo` is not actually used in the crate, ~inject an `extern crate foo;` statement into the AST~ force it to be resolved anyway in `CrateLoader::postprocess()`. This allows you to, for instance, inject a `#[panic_handler]` implementation into a `#![no_std]` crate without modifying its source so that it can be built as a `dylib`. It may also be useful for `#![panic_runtime]` or `#[global_allocator]`/`#![default_lib_allocator]` implementations.
My work previously involved integrating Rust into an existing C/C++ codebase which was built with Buck and shipped on, among other platforms, Android. When targeting Android, Buck builds all "native" code with shared linkage* so it can be loaded from Java/Kotlin. My project was not itself `#![no_std]`, but many of our dependencies were, and they would fail to build with shared linkage due to a lack of a panic handler. With this change, that project can add the new `force` option to the `std` dependency it already explicitly provides to every crate to solve this problem.
*This is an oversimplification - Buck has a couple features for aggregating dependencies into larger shared libraries, but none that I think sustainably solve this problem.
~The AST injection happens after macro expansion around where we similarly inject a test harness and proc-macro harness. The resolver's list of actually-used extern flags is populated during macro expansion, and if any of our `--extern` arguments have the `force` option and weren't already used, we inject an `extern crate` statement for them. The injection logic was added in `rustc_builtin_macros` as that's where similar injections for tests, proc-macros, and std/core already live.~
(New contributor - grateful for feedback and guidance!)
Stabilize raw-dylib, link_ordinal, import_name_type and -Cdlltool
This stabilizes the `raw-dylib` feature (#58713) for all architectures (i.e., `x86` as it is already stable for all other architectures).
Changes:
* Permit the use of the `raw-dylib` link kind for x86, the `link_ordinal` attribute and the `import_name_type` key for the `link` attribute.
* Mark the `raw_dylib` feature as stable.
* Stabilized the `-Zdlltool` argument as `-Cdlltool`.
* Note the path to `dlltool` if invoking it failed (we don't need to do this if `dlltool` returns an error since it prints its path in the error message).
* Adds tests for `-Cdlltool`.
* Adds tests for being unable to find the dlltool executable, and dlltool failing.
* Fixes a bug where we were checking the exit code of dlltool to see if it failed, but dlltool always returns 0 (indicating success), so instead we need to check if anything was written to `stderr`.
NOTE: As previously noted (https://github.com/rust-lang/rust/pull/104218#issuecomment-1315895618) using dlltool within rustc is temporary, but this is not the first time that Rust has added a temporary tool use and argument: https://github.com/rust-lang/rust/pull/104218#issuecomment-1318720482
Big thanks to ``````@tbu-`````` for the first version of this PR (#104218)
Improve check-cfg implementation
This PR makes multiple improvements into the implementation of check-cfg, it is a prerequisite to a follow-up PR that will introduce a simpler and more explicit syntax.
The 2 main area of improvements are:
1. Internal representation of expected values:
- now uses `FxHashSet<Option<Symbol>>` instead of `FxHashSet<Symbol>`, it made the no value expected case only possible when no values where in the `HashSet` which is now represented as `None` (same as cfg represent-it).
- a enum with `Some` and `Any` makes it now clear if some values are expected or not, necessary for `feature` and `target_feature`.
2. Diagnostics: Improve the diagnostics in multiple case and fix case where a missing value could have had a new name suggestion instead of the value diagnostic; and some drive by improvements
I highly recommend reviewing commit by commit.
r? `@petrochenkov`
This is done to simplify to relationship between names() and values()
but also make thing clearer (having an Any to represent that any values
are allowed) but also to allow the (none) + values expected cases that
wasn't possible before.
Add cross-language LLVM CFI support to the Rust compiler
This PR adds cross-language LLVM Control Flow Integrity (CFI) support to the Rust compiler by adding the `-Zsanitizer-cfi-normalize-integers` option to be used with Clang `-fsanitize-cfi-icall-normalize-integers` for normalizing integer types (see https://reviews.llvm.org/D139395).
It provides forward-edge control flow protection for C or C++ and Rust -compiled code "mixed binaries" (i.e., for when C or C++ and Rust -compiled code share the same virtual address space). For more information about LLVM CFI and cross-language LLVM CFI support for the Rust compiler, see design document in the tracking issue #89653.
Cross-language LLVM CFI can be enabled with -Zsanitizer=cfi and -Zsanitizer-cfi-normalize-integers, and requires proper (i.e., non-rustc) LTO (i.e., -Clinker-plugin-lto).
Thank you again, ``@bjorn3,`` ``@nikic,`` ``@samitolvanen,`` and the Rust community for all the help!
This commit adds cross-language LLVM Control Flow Integrity (CFI)
support to the Rust compiler by adding the
`-Zsanitizer-cfi-normalize-integers` option to be used with Clang
`-fsanitize-cfi-icall-normalize-integers` for normalizing integer types
(see https://reviews.llvm.org/D139395).
It provides forward-edge control flow protection for C or C++ and Rust
-compiled code "mixed binaries" (i.e., for when C or C++ and Rust
-compiled code share the same virtual address space). For more
information about LLVM CFI and cross-language LLVM CFI support for the
Rust compiler, see design document in the tracking issue #89653.
Cross-language LLVM CFI can be enabled with -Zsanitizer=cfi and
-Zsanitizer-cfi-normalize-integers, and requires proper (i.e.,
non-rustc) LTO (i.e., -Clinker-plugin-lto).
Remove `QueryEngine` trait
This removes the `QueryEngine` trait and `Queries` from `rustc_query_impl` and replaced them with function pointers and fields in `QuerySystem`. As a side effect `OnDiskCache` is moved back into `rustc_middle` and the `OnDiskCache` trait is also removed.
This has a couple of benefits.
- `TyCtxt` is used in the query system instead of the removed `QueryCtxt` which is larger.
- Function pointers are more flexible to work with. A variant of https://github.com/rust-lang/rust/pull/107802 is included which avoids the double indirection. For https://github.com/rust-lang/rust/pull/108938 we can name entry point `__rust_end_short_backtrace` to avoid some overhead. For https://github.com/rust-lang/rust/pull/108062 it avoids the duplicate `QueryEngine` structs.
- `QueryContext` now implements `DepContext` which avoids many `dep_context()` calls in `rustc_query_system`.
- The `rustc_driver` size is reduced by 0.33%, hopefully that means some bootstrap improvements.
- This avoids the unsafe code around the `QueryEngine` trait.
r? `@cjgillot`
Move the WorkerLocal type from the rustc-rayon fork into rustc_data_structures
This PR moves the definition of the `WorkerLocal` type from `rustc-rayon` into `rustc_data_structures`. This is enabled by the introduction of the `Registry` type which allows you to group up threads to be used by `WorkerLocal` which is basically just an array with an per thread index. The `Registry` type mirrors the one in Rayon and each Rayon worker thread is also registered with the new `Registry`. Safety for `WorkerLocal` is ensured by having it keep a reference to the registry and checking on each access that we're still on the group of threads associated with the registry used to construct it.
Accessing a `WorkerLocal` is micro-optimized due to it being hot since it's used for most arena allocations.
Performance is slightly improved for the parallel compiler:
<table><tr><td rowspan="2">Benchmark</td><td colspan="1"><b>Before</b></th><td colspan="2"><b>After</b></th></tr><tr><td align="right">Time</td><td align="right">Time</td><td align="right">%</th></tr><tr><td>🟣 <b>clap</b>:check</td><td align="right">1.9992s</td><td align="right">1.9949s</td><td align="right"> -0.21%</td></tr><tr><td>🟣 <b>hyper</b>:check</td><td align="right">0.2977s</td><td align="right">0.2970s</td><td align="right"> -0.22%</td></tr><tr><td>🟣 <b>regex</b>:check</td><td align="right">1.1335s</td><td align="right">1.1315s</td><td align="right"> -0.18%</td></tr><tr><td>🟣 <b>syn</b>:check</td><td align="right">1.8235s</td><td align="right">1.8171s</td><td align="right"> -0.35%</td></tr><tr><td>🟣 <b>syntex_syntax</b>:check</td><td align="right">6.9047s</td><td align="right">6.8930s</td><td align="right"> -0.17%</td></tr><tr><td>Total</td><td align="right">12.1586s</td><td align="right">12.1336s</td><td align="right"> -0.21%</td></tr><tr><td>Summary</td><td align="right">1.0000s</td><td align="right">0.9977s</td><td align="right"> -0.23%</td></tr></table>
cc `@SparrowLii`
Run various queries from other queries instead of explicitly in phases
These are just legacy leftovers from when rustc didn't have a query system. While there are more cleanups of this sort that can be done here, I want to land them in smaller steps.
This phased order of query invocations was already a lie, as any query that looks at types (e.g. the wf checks run before) can invoke e.g. const eval which invokes borrowck, which invokes typeck, ...
Report allocation errors as panics
OOM is now reported as a panic but with a custom payload type (`AllocErrorPanicPayload`) which holds the layout that was passed to `handle_alloc_error`.
This should be review one commit at a time:
- The first commit adds `AllocErrorPanicPayload` and changes allocation errors to always be reported as panics.
- The second commit removes `#[alloc_error_handler]` and the `alloc_error_hook` API.
ACP: https://github.com/rust-lang/libs-team/issues/192Closes#51540Closes#51245
Evaluate place expression in `PlaceMention`
https://github.com/rust-lang/rust/pull/102256 introduces a `PlaceMention(place)` MIR statement which keep trace of `let _ = place` statements from surface rust, but without semantics.
This PR proposes to change the behaviour of `let _ =` patterns with respect to the borrow-checker to verify that the bound place is live.
Specifically, consider this code:
```rust
let _ = {
let a = 5;
&a
};
```
This passes borrowck without error on stable. Meanwhile, replacing `_` by `_: _` or `_p` errors with "error[E0597]: `a` does not live long enough", [see playground](https://play.rust-lang.org/?version=stable&mode=debug&edition=2021&gist=c448d25a7c205dc95a0967fe96bccce8).
This PR *does not* change how `_` patterns behave with respect to initializedness: it remains ok to bind a moved-from place to `_`.
The relevant test is `tests/ui/borrowck/let_underscore_temporary.rs`. Crater check found no regression.
For consistency, this PR changes miri to evaluate the place found in `PlaceMention`, and report eventual dangling pointers found within it.
r? `@RalfJung`
Allow to feed a value in another query's cache and remove `WithOptConstParam`
I used it to remove `WithOptConstParam` queries, as an example.
The idea is that a query (here `typeck(function)`) can write into another query's cache (here `type_of(anon const)`). The dependency node for `type_of` would depend on all the current dependencies of `typeck`.
There is still an issue with cycles: if `type_of(anon const)` is accessed before `typeck(function)`, we will still have the usual cycle. The way around this issue is to `ensure` that `typeck(function)` is called before accessing `type_of(anon const)`.
When replayed, we may the following cases:
- `typeck` is green, in that case `type_of` is green too, and all is right;
- `type_of` is green, `typeck` may still be marked as red (it depends on strictly more things than `type_of`) -> we verify that the saved value and the re-computed value of `type_of` have the same hash;
- `type_of` is red, then `typeck` is red -> it's the caller responsibility to ensure `typeck` is recomputed *before* `type_of`.
As `anon consts` have their own `DefPathData`, it's not possible to have the def-id of the anon-const point to something outside the original function, but the general case may have to be resolved before using this device more broadly.
There is an open question about loading from the on-disk cache. If `typeck` is loaded from the on-disk cache, the side-effect does not happen. The regular `type_of` implementation can go and fetch the correct value from the decoded `typeck` results, and the dep-graph will check that the hashes match, but I'm not sure we want to rely on this behaviour.
I specifically allowed to feed the value to `type_of` from inside a call to `type_of`. In that case, the dep-graph will check that the fingerprints of both values match.
This implementation is still very sensitive to cycles, and requires that we call `typeck(function)` before `typeck(anon const)`. The reason is that `typeck(anon const)` calls `type_of(anon const)`, which calls `typeck(function)`, which feeds `type_of(anon const)`, and needs to build the MIR so needs `typeck(anon const)`. The latter call would not cycle, since `type_of(anon const)` has been set, but I'd rather not remove the cycle check.
Enable flatten-format-args by default.
Part of https://github.com/rust-lang/rust/issues/99012.
This enables the `flatten-format-args` feature that was added by https://github.com/rust-lang/rust/pull/106824:
> This change inlines string literals, integer literals and nested format_args!() into format_args!() during ast lowering, making all of the following pairs result in equivalent hir:
>
> ```rust
> println!("Hello, {}!", "World");
> println!("Hello, World!");
> ```
>
> ```rust
> println!("[info] {}", format_args!("error"));
> println!("[info] error");
> ```
>
> ```rust
> println!("[{}] {}", status, format_args!("error: {}", msg));
> println!("[{}] error: {}", status, msg);
> ```
>
> ```rust
> println!("{} + {} = {}", 1, 2, 1 + 2);
> println!("1 + 2 = {}", 1 + 2);
> ```
>
> And so on.
>
> This is useful for macros. E.g. a `log::info!()` macro could just pass the tokens from the user directly into a `format_args!()` that gets efficiently flattened/inlined into a `format_args!("info: {}")`.
>
> It also means that `dbg!(x)` will have its file, line, and expression name inlined:
>
> ```rust
> eprintln!("[{}:{}] {} = {:#?}", file!(), line!(), stringify!(x), x); // before
> eprintln!("[example.rs:1] x = {:#?}", x); // after
> ```
>
> Which can be nice in some cases, but also means a lot more unique static strings than before if dbg!() is used a lot.
This is mostly an optimization, except that it will be visible through [`fmt::Arguments::as_str()`](https://doc.rust-lang.org/nightly/std/fmt/struct.Arguments.html#method.as_str).
In https://github.com/rust-lang/rust/pull/106823, there was already a libs-api FCP about the documentation of `fmt::Arguments::as_str()` to allow it to give `Some` rather than `None` depending on optimizations like this. That was just a documentation update though. This PR is the one that actually makes the user visible change:
```rust
assert_eq!(format_args!("abc").as_str(), Some("abc")); // Unchanged.
assert_eq!(format_args!("ab{}", "c").as_str(), Some("abc")); // Was `None` before!
```
Fluent, with all the icu4x it brings in, takes quite some time to
compile. `fluent_messages!` is only needed in further downstream rustc
crates, but is blocking more upstream crates like `rustc_index`. By
splitting it out, we allow `rustc_macros` to be compiled earlier, which
speeds up `x check compiler` by about 5 seconds (and even more after the
needless dependency on `serde_json` is removed from
`rustc_data_structures`).
Check pattern refutability on THIR
The current `check_match` query is based on HIR, but partially re-lowers HIR into THIR.
This PR proposed to use the results of the `thir_body` query to check matches, instead of re-building THIR.
Most of the diagnostic changes are spans getting shorter, or commas/semicolons not getting removed.
This PR degrades the diagnostic for confusing constants in patterns (`let A = foo()` where `A` resolves to a `const A` somewhere): it does not point ot the definition of `const A` any more.
Avoid a few locks
We can use atomics or datastructures tuned for specific access patterns instead of locks. This may be an improvement for parallel rustc, but it's mostly a cleanup making various datastructures only usable in the way they are used right now (append data, never mutate), instead of having a general purpose lock.
`-Cdebuginfo=1` was never line tables only and
can't be due to backwards compatibility issues.
This was clarified and an option for line tables only
was added. Additionally an option for line info
directives only was added, which is well needed for
some targets. The debug info options should now
behave the same as clang's debug info options.
Rename `with_source_map` as `set_source_map`. Because `with` functions
(e.g. `with_session_globals`, `scoped_tls::ScopedKey::with`) are for
*getting* a value for the duration of a closure, and `set` functions
(e.g. `set_session_globals_then` `scoped_tls::ScopedKey::with`) are for
*setting* a value for the duration of a closure.
Also fix up the comment, which is wrong:
- The bit about `TyCtxt` is wrong.
- `span_debug1` doesn't exist any more.
- There's only one level of fallback, not two.
(This is effectively a follow-up to the changes in #93936.)
Also add a comment explaining that `SessionGlobals::source_map` should
only be used when absolutely necessary.
Use Rayon's TLV directly
This accesses Rayon's `TLV` thread local directly avoiding wrapper functions. This makes rustc work with https://github.com/rust-lang/rustc-rayon/pull/10.
r? `@cuviper`
Make doc comment a little bit more accurate
It queries not LLVM in particular but the codegen backend *in general*. While cranelift does not provide target features, other codegen backends do.
Found while looking for [this answer](https://github.com/rust-lang/rust/issues/108680#issuecomment-1484324690).
Add `try_canonicalize` to `rustc_fs_util` and use it over `fs::canonicalize`
This adds `try_canonicalize` which tries to call `fs::canonicalize`, but falls back to `std::path::absolute` if it fails. Existing `canonicalize` calls are replaced with it. `fs::canonicalize` is not guaranteed to work on Windows.
Add `-Z time-passes-format` to allow specifying a JSON output for `-Z time-passes`
This adds back the `-Z time` option as that is useful for [my rustc benchmark tool](https://github.com/Zoxc/rcb), reverting https://github.com/rust-lang/rust/pull/102725. It now uses nanoseconds and bytes as the units so it is renamed to `time-precise`.
It partially expands crate attributes before the main expansion pass (without modifying the crate), and the produced preliminary crate attribute list is used for querying a few attributes that are required very early.
Crate-level cfg attributes are then expanded normally during the main expansion pass, like attributes on any other nodes.
Avoid unnecessary hashing
I noticed some stable hashing being done in a non-incremental build. It turns out that some of this is necessary to compute the crate hash, but some of it is not. Removing the unnecessary hashing is a perf win.
r? `@cjgillot`
This makes it easier to open the messages file while developing on features.
The commit was the result of automatted changes:
for p in compiler/rustc_*; do mv $p/locales/en-US.ftl $p/messages.ftl; rmdir $p/locales; done
for p in compiler/rustc_*; do sed -i "s#\.\./locales/en-US.ftl#../messages.ftl#" $p/src/lib.rs; done
Rollup of 9 pull requests
Successful merges:
- #104363 (Make `unused_allocation` lint against `Box::new` too)
- #106633 (Stabilize `nonzero_min_max`)
- #106844 (allow negative numeric literals in `concat!`)
- #108071 (Implement goal caching with the new solver)
- #108542 (Force parentheses around `match` expression in binary expression)
- #108690 (Place size limits on query keys and values)
- #108708 (Prevent overflow through Arc::downgrade)
- #108739 (Prevent the `start_bx` basic block in codegen from having two `Builder`s at the same time)
- #108806 (Querify register_tools and post-expansion early lints)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Querify register_tools and post-expansion early lints
The 2 extra queries correspond to code that happen before and after macro expansion, and don't need the resolver to exist.
This is fixed by simply using the currently registered target in the
current session. We need to use it because of target json that are not
by design included in the rustc list of targets.
The crate hash is needed:
- if debug assertions are enabled, or
- if incr. comp. is enabled, or
- if metadata is being generated, or
- if `-C instrumentation-coverage` is enabled.
This commit avoids computing the crate hash when these conditions are
all false, such as when doing a release build of a binary crate.
It uses `Option` to store the hashes when needed, rather than
computing them on demand, because some of them are needed in multiple
places and computing them on demand would make compilation slower.
The commit also removes `Owner::hash_without_bodies`. There is no
benefit to pre-computing that one, it can just be done in the normal
fashion.
Implement -Zlink-directives=yes/no
`-Zlink-directives=no` will ignored `#[link]` directives while compiling a crate, so nothing is emitted into the crate's metadata. The assumption is that the build system already knows about the crate's native dependencies and can provide them at link time without these directives.
This is another way to address issue # #70093, which is currently addressed by `-Zlink-native-libraries` (implemented in #70095). The latter is implemented at link time, which has the effect of ignoring `#[link]` in *every* crate. This makes it a very large hammer as it requires all native dependencies to be known to the build system to be at all usable, including those in sysroot libraries. I think this means its effectively unused, and definitely under-used.
Being able to control this on a crate-by-crate basis should make it much easier to apply when needed.
I'm not sure if we need both mechanisms, but we can decide that later.
cc `@pcwalton` `@cramertj`
`-Zlink-directives=no` will ignored `#[link]` directives while compiling a
crate, so nothing is emitted into the crate's metadata. The assumption is
that the build system already knows about the crate's native dependencies
and can provide them at link time without these directives.
This is another way to address issue # #70093, which is currently addressed
by `-Zlink-native-libraries` (implemented in #70095). The latter is
implemented at link time, which has the effect of ignoring `#[link]`
in *every* crate. This makes it a very large hammer as it requires all
native dependencies to be known to the build system to be at all usable,
including those in sysroot libraries. I think this means its effectively
unused, and definitely under-used.
Being able to control this on a crate-by-crate basis should make it much
easier to apply when needed.
I'm not sure if we need both mechanisms, but we can decide that later.
errors: generate typed identifiers in each crate
Instead of loading the Fluent resources for every crate in `rustc_error_messages`, each crate generates typed identifiers for its own diagnostics and creates a static which are pulled together in the `rustc_driver` crate and provided to the diagnostic emitter.
There are advantages and disadvantages to this change..
#### Advantages
- Changing a diagnostic now only recompiles the crate for that diagnostic and those crates that depend on it, rather than `rustc_error_messages` and all crates thereafter.
- This approach can be used to support first-party crates that want to supply translatable diagnostics (e.g. `rust-lang/thorin` in https://github.com/rust-lang/rust/pull/102612#discussion_r985372582, cc `@JhonnyBillM)`
- We can extend this a little so that tools built using rustc internals (like clippy or rustdoc) can add their own diagnostic resources (much more easily than those resources needing to be available to `rustc_error_messages`)
#### Disadvantages
- Crates can only refer to the diagnostic messages defined in the current crate (or those from dependencies), rather than all diagnostic messages.
- `rustc_driver` (or some other crate we create for this purpose) has to directly depend on *everything* that has error messages.
- It already transitively depended on all these crates.
#### Pending work
- [x] I don't know how to make `rustc_codegen_gcc`'s translated diagnostics work with this approach - because `rustc_driver` can't depend on that crate and so can't get its resources to provide to the diagnostic emission. I don't really know how the alternative codegen backends are actually wired up to the compiler at all.
- [x] Update `triagebot.toml` to track the moved FTL files.
r? `@compiler-errors`
cc #100717
Extend `CodegenBackend` trait with a function returning the translation
resources from the codegen backend, which can be added to the complete
list of resources provided to the emitter.
Signed-off-by: David Wood <david.wood@huawei.com>
Instead of loading the Fluent resources for every crate in
`rustc_error_messages`, each crate generates typed identifiers for its
own diagnostics and creates a static which are pulled together in the
`rustc_driver` crate and provided to the diagnostic emitter.
Signed-off-by: David Wood <david.wood@huawei.com>
Use a lock-free datastructure for source_span
follow up to the perf regression in https://github.com/rust-lang/rust/pull/105462
The main regression is likely the CStore, but let's evaluate the perf impact of this on its own
remove unstable `pick_stable_methods_before_any_unstable` flag
This flag was only added in #90329 in case there was any issue with the impl so that it would be easy to tell nightly users to use the flag to disable the new logic to fix their code. It's now been enabled for two years and also I can't find any issues corresponding to this new functionality? This flag made it way harder to understand how this code works so it would be nice to remove it and simplify what's going on.
cc `@nbdd0121`
r? `@oli-obk`
Most tests involving save-analysis were removed, but I kept a few where
the `-Zsave-analysis` was an add-on to the main thing being tested,
rather than the main thing being tested.
For `x.py install`, the `rust-analysis` target has been removed.
For `x.py dist`, the `rust-analysis` target has been kept in a
degenerate form: it just produces a single file `reduced.json`
indicating that save-analysis has been removed. This is necessary for
rustup to keep working.
Closes#43606.
There is a type `QueryCtxt`, which impls the trait `QueryContext`.
Confusingly, there is another type `QueryContext`. The latter is (like
`TyCtxt`) just a pointer to a `GlobalContext`. It's not used much, e.g.
its `impl` block has a single method.
This commit removes `QueryContext`, replacing its use with direct
`GlobalCtxt` use.
Recognize all bells and whistles that LLVM's XRay pass is capable of.
The always/never settings are a bit dumb without attributes but they're
still there. The default instruction count is chosen by the compiler,
not LLVM pass. We'll do it later.
Use stable metric for const eval limit instead of current terminator-based logic
This patch adds a `MirPass` that inserts a new MIR instruction `ConstEvalCounter` to any loops and function calls in the CFG. This instruction is used during Const Eval to count against the `const_eval_limit`, and emit the `StepLimitReached` error, replacing the current logic which uses Terminators only.
The new method of counting loops and function calls should be more stable across compiler versions (i.e., not cause crates that compiled successfully before, to no longer compile when changes to the MIR generation/optimization are made).
Also see: #103877
- Remove logic that limits const eval based on terminators, and use the
stable metric instead (back edges + fn calls)
- Add unstable flag `tiny-const-eval-limit` to add UI tests that do not
have to go up to the regular 2M step limit
Warn when using panic-strategy abort for proc-macro crates
See https://github.com/rust-lang/rust/issues/82320, this simply warns for now as that seems like the best step that can be immediately taken (opposed to straight up rejecting or ignoring)
Add log-backtrace option to show backtraces along with logging
according to #90698, I added a compiler option, `-Zlog-backtrace=filter`, where `filter` is a module name, to show backtraces for logging without rebuilding.
resolve#90698
Convert all the crates that have had their diagnostic migration
completed (except save_analysis because that will be deleted soon and
apfloat because of the licensing problem).
This allows analyzing the output programatically; for example, finding
the item with the highest `total_estimate`.
I also took the liberty of adding `untracked` tests to `rustc_session` and documentation to the unstable book for `dump-mono-items`.
Using that options basically changes all stable hashes we may compute.
Adding/removing as UNTRACKED it makes everything ICE (unstable fingerprint
everywhere). As TRACKED, it can still do its job without ICEing.
Add -Z maximal-hir-to-mir-coverage flag
This PR adds a new unstable flag `-Z maximal-hir-to-mir-coverage` that changes the behavior of `maybe_lint_level_root_bounded`, pursuant to [a discussion on Zulip](https://rust-lang.zulipchat.com/#narrow/stream/131828-t-compiler/topic/Mapping.20MIR.20to.20HIR). When enabled, this function will not search upwards for a lint root, but rather immediately return the provided HIR node ID. This change increases the granularity of the mapping between MIR locations and HIR nodes inside the `SourceScopeLocalData` data structures. This increase in granularity is useful for rustc consumers like [Flowistry](https://github.com/willcrichton/flowistry) that rely on getting source-mapping information about the MIR CFG that is as precise as possible.
A test `maximal_mir_to_hir_coverage.rs` has been added to verify that this flag does not break anything.
r? `@cjgillot`
cc `@gavinleroy`
feed resolver_for_lowering instead of storing it in a field
r? `@cjgillot`
opening this as
* a discussion for `no_hash` + `feedable` queries. I think we'll want those, but I don't quite understand why they are rejected beyond a double check of the stable hashes for situations where the query is fed but also read from incremental caches.
* and a discussion on removing all untracked fields from TyCtxt and setting it up so that they are fed queries instead
Use `as_deref` in compiler (but only where it makes sense)
This simplifies some code :3
(there are some changes that are not exacly `as_deref`, but more like "clever `Option`/`Result` method use")
Previously, rustdoc would unconditionally report the version that *rustc* was compiled with.
That showed things like `nightly-2022-10-30`, which wasn't right, since this was a `dev` build compiled from source.
Fix it by changing `rustc_driver::version` to a macro expanded at invocation time.
improve `filesearch::get_or_default_sysroot`
`fn get_or_default_sysroot` is now improved and used in `miri` and `clippy`, and tests are still passing as they should. So we no longer need to implement custom workarounds/hacks to find sysroot in tools like miri/clippy.
Resolves https://github.com/rust-lang/rust/issues/98832
re-opened from #103581
Track where diagnostics were created.
This implements the `-Ztrack-diagnostics` flag, which uses `#[track_caller]` to track where diagnostics are created. It is meant as a debugging tool much like `-Ztreat-err-as-bug`.
For example, the following code...
```rust
struct A;
struct B;
fn main(){
let _: A = B;
}
```
...now emits the following error message:
```
error[E0308]: mismatched types
--> src\main.rs:5:16
|
5 | let _: A = B;
| - ^ expected struct `A`, found struct `B`
| |
| expected due to this
-Ztrack-diagnostics: created at compiler\rustc_infer\src\infer\error_reporting\mod.rs:2275:31
```
spastorino noticed some silly expressions like `item_id.def_id.def_id`.
This commit renames several `def_id: OwnerId` fields as `owner_id`, so
those expressions become `item_id.owner_id.def_id`.
`item_id.owner_id.local_def_id` would be even clearer, but the use of
`def_id` for values of type `LocalDefId` is *very* widespread, so I left
that alone.
move hir typeck into separate crate
second part https://github.com/rust-lang/compiler-team/issues/529
I avoided pretty much anything that wasn't just a simple move + path adjustment. Left fixmes for methods which are at an odd place
r? `@compiler-errors`
