Replace some LLVMRust wrappers with calls to the LLVM C API
This PR removes the LLVMRust wrapper functions for getting/setting linkage and visibility, and replaces them with direct calls to the corresponding functions in LLVM's C API.
To make this convenient and sound, two pieces of supporting code have also been added:
- A simple proc-macro that derives `TryFrom<u32>` for fieldless enums
- A wrapper type for C enum values returned by LLVM functions, to ensure soundness if LLVM returns an enum value we don't know about
In a few places, the use of safe wrapper functions means that an `unsafe` block is no longer needed, so the affected code has changed its indentation level.
Before this change, adding a lint was a difficult matter
because it always had some overhead involved. This was
because all lints would run, no matter their default level,
or if the user had #![allow]ed them. This PR changes that
Use `Vec` in `rustc_interface::Config::locale_resources`
This allows a third-party tool to injects its own resources, when receiving the config via `rustc_driver::Callbacks::config`.
...and remove the `const_arg_path` feature gate as a result. It was only
a stopgap measure to fix the regression that the new lowering introduced
(which should now be fixed by this PR).
Retroactively feature gate `ConstArgKind::Path`
This puts the lowering introduced by #125915 under a feature gate until we fix the regressions introduced by it. Alternative to whole sale reverting the PR since it didn't seem like a very clean revert and I think this is generally a step in the right direction and don't want to get stuck landing and reverting the PR over and over :)
cc #129137 ``@camelid,`` tests taken from there. beta is branching soon so I think it makes sense to not try and rush that fix through since it wont have much time to bake and if it has issues we can't simply revert it on beta.
Fixes#128016
Add basic Serde serialization capabilities to Stable MIR
This PR adds basic Serde serialization capabilities to Stable MIR. It is intentionally minimal (just wrapping all stable MIR types with a Serde `derive`), so that any important design decisions can be discussed before going further. A simple test is included with this PR to validate that JSON can actually be emitted.
## Notes
When I wrapped the Stable MIR error types in `compiler/stable_mir/src/error.rs`, it caused test failures (though I'm not sure why) so I backed those out.
## Future Work
So, this PR will support serializing basic stable MIR, but it _does not_ support serializing interned values beneath `Ty`s and `AllocId`s, etc... My current thinking about how to handle this is as follows:
1. Add new `visited_X` fields to the `Tables` struct for each interned category of interest.
2. As serialization is occuring, serialize interned values as usual _and_ also record the interned value we referenced in `visited_X`.
(Possibly) In addition, if an interned value recursively references other interned values, record those interned values as well.
3. Teach the stable MIR `Context` how to access the `visited_X` values and expose them with wrappers in `stable_mir/src/lib.rs` to users (e.g. to serialize and/or further analyze them).
### Pros
This approach does not commit to any specific serialization format regarding interned values or other more complex cases, which avoids us locking into any behaviors that may not be desired long-term.
### Cons
The user will need to manually handle serializing interned values.
### Alternatives
1. We can directly provide access to the underlying `Tables` maps for interned values; the disadvantage of this approach is that it either requires extra processing for users to filter out to only use the values that they need _or_ users may serialize extra values that they don't need. The advantage is that the implementation is even simpler. The other pros/cons are similar to the above.
2. We can directly serialize interned values by expanding them in-place. The pro is that this may make some basic inputs easier to consume. However, the cons are that there will need to be special provisions for dealing with cyclical values on both the producer and consumer _and_ global values will possibly need to be de-duplicated on the consumer side.
We don't want to have questions in the diagnostic output. Instead, we use wording that communicates uncertainty, like "might":
```
error[E0432]: unresolved import `spam`
--> $DIR/import-from-missing-star-3.rs:2:9
|
LL | use spam::*;
| ^^^^ you might be missing crate `spam`
|
= help: consider adding `extern crate spam` to use the `spam` crate
```
Represent type-level consts with new-and-improved `hir::ConstArg`
### Summary
This is a step toward `min_generic_const_exprs`. We now represent all const
generic arguments using an enum that differentiates between const *paths*
(temporarily just bare const params) and arbitrary anon consts that may perform
computations. This will enable us to cleanly implement the `min_generic_const_args`
plan of allowing the use of generics in paths used as const args, while
disallowing their use in arbitrary anon consts. Here is a summary of the salient
aspects of this change:
- Add `current_def_id_parent` to `LoweringContext`
This is needed to track anon const parents properly once we implement
`ConstArgKind::Path` (which requires moving anon const def-creation
outside of `DefCollector`).
- Create `hir::ConstArgKind` enum with `Path` and `Anon` variants. Use it in the
existing `hir::ConstArg` struct, replacing the previous `hir::AnonConst` field.
- Use `ConstArg` for all instances of const args. Specifically, use it instead
of `AnonConst` for assoc item constraints, array lengths, and const param
defaults.
- Some `ast::AnonConst`s now have their `DefId`s created in
rustc_ast_lowering rather than `DefCollector`. This is because in some
cases they will end up becoming a `ConstArgKind::Path` instead, which
has no `DefId`. We have to solve this in a hacky way where we guess
whether the `AnonConst` could end up as a path const since we can't
know for sure until after name resolution (`N` could refer to a free
const or a nullary struct). If it has no chance as being a const
param, then we create a `DefId` in `DefCollector` -- otherwise we
decide during ast_lowering. This will have to be updated once all path
consts use `ConstArgKind::Path`.
- We explicitly use `ConstArgHasType` for array lengths, rather than
implicitly relying on anon const type feeding -- this is due to the
addition of `ConstArgKind::Path`.
- Some tests have their outputs changed, but the changes are for the
most part minor (including removing duplicate or almost-duplicate
errors). One test now ICEs, but it is for an incomplete, unstable
feature and is now tracked at https://github.com/rust-lang/rust/issues/127009.
### Followup items post-merge
- Use `ConstArgKind::Path` for all const paths, not just const params.
- Fix (no github dont close this issue) #127009
- If a path in generic args doesn't resolve as a type, try to resolve as a const
instead (do this in rustc_resolve). Then remove the special-casing from
`rustc_ast_lowering`, so that all params will automatically be lowered as
`ConstArgKind::Path`.
- (?) Consider making `const_evaluatable_unchecked` a hard error, or at least
trying it in crater
r? `@BoxyUwU`
This is a very large commit since a lot needs to be changed in order to
make the tests pass. The salient changes are:
- `ConstArgKind` gets a new `Path` variant, and all const params are now
represented using it. Non-param paths still use `ConstArgKind::Anon`
to prevent this change from getting too large, but they will soon use
the `Path` variant too.
- `ConstArg` gets a distinct `hir_id` field and its own variant in
`hir::Node`. This affected many parts of the compiler that expected
the parent of an `AnonConst` to be the containing context (e.g., an
array repeat expression). They have been changed to check the
"grandparent" where necessary.
- Some `ast::AnonConst`s now have their `DefId`s created in
rustc_ast_lowering rather than `DefCollector`. This is because in some
cases they will end up becoming a `ConstArgKind::Path` instead, which
has no `DefId`. We have to solve this in a hacky way where we guess
whether the `AnonConst` could end up as a path const since we can't
know for sure until after name resolution (`N` could refer to a free
const or a nullary struct). If it has no chance as being a const
param, then we create a `DefId` in `DefCollector` -- otherwise we
decide during ast_lowering. This will have to be updated once all path
consts use `ConstArgKind::Path`.
- We explicitly use `ConstArgHasType` for array lengths, rather than
implicitly relying on anon const type feeding -- this is due to the
addition of `ConstArgKind::Path`.
- Some tests have their outputs changed, but the changes are for the
most part minor (including removing duplicate or almost-duplicate
errors). One test now ICEs, but it is for an incomplete, unstable
feature and is now tracked at #127009.
Improve dead code analysis
Fixes#120770
1. check impl items later if self ty is private although the trait method is public, cause we must use the ty firstly if it's private
2. mark the adt live if it appears in pattern, like generic argument, this implies the use of the adt
3. based on the above, we can handle the case that private adts impl Default, so that we don't need adding rustc_trivial_field_reads on Default, and the logic in should_ignore_item
r? ``@pnkfelix``
smir: merge identical Constant and ConstOperand types
The first commit renames the const operand visitor functions on regular MIR to match the type name, that was forgotten in the original rename.
The second commit changes stable MIR, fixing https://github.com/rust-lang/project-stable-mir/issues/71. Previously there were two different smir types for the MIR type `ConstOperand`, one used in `Operand` and one in `VarDebugInfoContents`.
Maybe we should have done this with https://github.com/rust-lang/rust/pull/125967, so there's only a single breaking change... but I saw that PR too late.
Fixes https://github.com/rust-lang/project-stable-mir/issues/71
Unify intrinsics body handling in StableMIR
rust-lang/rust#120675 introduced a new mechanism to declare intrinsics which will potentially replace the rust-intrinsic ABI.
The new mechanism introduces a placeholder body and mark the intrinsic with `#[rustc_intrinsic_must_be_overridden]`.
In practice, this means that a backend should not generate code for the placeholder, and shim the intrinsic.
The new annotation is an internal compiler implementation, and it doesn't need to be exposed to StableMIR users.
In this PR, we unify the interface for intrinsics marked with `rustc_intrinsic_must_be_overridden` and intrinsics that do not have a body.
Fixes https://github.com/rust-lang/project-stable-mir/issues/79
r? ``@oli-obk``
cc: ``@momvart``
We implement the trait only for definitions that should have a type.
It's possible that I missed a few definitions, but we can add them later
if needed.
rust-lang/rust#120675 introduced a new mechanism to declare intrinsics
which will potentially replace the rust-intrinsic ABI.
The new mechanism introduces a placeholder body and mark the intrinsic
with #[rustc_intrinsic_must_be_overridden].
In practice, this means that backends should not generate code for the
placeholder, and shim the intrinsic.
The new annotation is an internal compiler implementation,
and it doesn't need to be exposed to StableMIR users.
In this PR, intrinsics marked with `rustc_intrinsic_must_be_overridden`
are handled the same way as intrinsics that do not have a body.
Port `tests/run-make-fulldeps/hotplug_codegen_backend` to ui-fulldeps
This is the last remaining run-make-fulldeps test, which means I actually had to leave behind a dummy README file to prevent compiletest from complaining about a missing directory.
(Removing the run-make-fulldeps suite entirely is non-trivial, so I intend to do so in a separate PR after this one.)
---
I wasn't sure about adding a new kind of aux build just for this one test, so I also tried to just port this test from Makefile to [rmake](https://github.com/rust-lang/rust/issues/121876) instead.
But I found that I couldn't get rmake to fully work for a run-make-fulldeps test, which convinced me that getting rid of run-make-fulldeps is worthwhile.
r? `@jieyouxu`
Revert "Use the HIR instead of mir_keys for determining whether something will have a MIR body."
This reverts commit e5cba17b84.
turns out SMIR still needs it (https://github.com/model-checking/kani/issues/3218). I'll create a full plan and MCP for what I intended this to be a part of. Maybe my plan is nonsense anyway.
Port `tests/run-make-fulldeps/issue-19371` to ui-fulldeps
This test can run as an ordinary `tests/ui-fulldeps` test, with the help of some additional header variable substitutions to supply a sysroot and linker.
---
Unlike #125973, this test appears to be testing something vaguely useful and breakable, which is why I didn't just delete it.
Currently we have an awkward mix of fallible and infallible functions:
```
new_parser_from_source_str
maybe_new_parser_from_source_str
new_parser_from_file
(maybe_new_parser_from_file) // missing
(new_parser_from_source_file) // missing
maybe_new_parser_from_source_file
source_str_to_stream
maybe_source_file_to_stream
```
We could add the two missing functions, but instead this commit removes
of all the infallible ones and renames the fallible ones leaving us with
these which are all fallible:
```
new_parser_from_source_str
new_parser_from_file
new_parser_from_source_file
source_str_to_stream
source_file_to_stream
```
This requires making `unwrap_or_emit_fatal` public so callers of
formerly infallible functions can still work.
This does make some of the call sites slightly more verbose, but I think
it's worth it for the simpler API. Also, there are two `catch_unwind`
calls and one `catch_fatal_errors` call in this diff that become
removable thanks this change. (I will do that in a follow-up PR.)
