Fix `break_last_token`.
It currently doesn't handle the three-char tokens `>>=` and `<<=` correctly. These can be broken twice, resulting in three individual tokens. This is a latent bug that currently doesn't cause any problems, but does cause problems for #124141, because that PR increases the usage of lazy token streams.
r? `@petrochenkov`
It currently doesn't handle the three-char tokens `>>=` and `<<=`
correctly. These can be broken twice, resulting in three individual
tokens. This is a latent bug that currently doesn't cause any problems,
but does cause problems for #124141, because that PR increases the usage
of lazy token streams.
Implement a Method to Seal `DiagInner`'s Suggestions
This PR adds a method on `DiagInner` called `.seal_suggestions()` to prevent new suggestions from being added while preserving existing suggestions.
This is useful because currently there is no way to prevent new suggestions from being added to a diagnostic. `.disable_suggestions()` is the closest but it gets rid of all suggestions before and after the call.
Therefore, `.seal_suggestions()` can be used when, for example, misspelled keyword is detected and reported. In such cases, we may want to prevent other suggestions from being added to the diagnostic, as they would likely be meaningless once the misspelled keyword is identified. For context: https://github.com/rust-lang/rust/pull/129899#discussion_r1741307132
To store an additional state, the type of the `suggestions` field in `DiagInner` was changed into a three variant enum. While this change affects files across different crates, care was taken to preserve the existing code's semantics. This is validated by the fact that all UI tests pass without any modifications.
r? chenyukang
stabilize `const_extern_fn`
closes https://github.com/rust-lang/rust/issues/64926
tracking issue: https://github.com/rust-lang/rust/issues/64926
reference PR: https://github.com/rust-lang/reference/pull/1596
## Stabilizaton Report
### Summary
Using `const extern "Rust"` and `const extern "C"` was already stabilized (since version 1.62.0, see https://github.com/rust-lang/rust/pull/95346). This PR stabilizes the other calling conventions: it is now possible to write `const unsafe extern "calling-convention" fn` and `const extern "calling-convention" fn` for any supported calling convention:
```rust
const extern "C-unwind" fn foo1(val: u8) -> u8 { val + 1}
const extern "stdcall" fn foo2(val: u8) -> u8 { val + 1}
const unsafe extern "C-unwind" fn bar1(val: bool) -> bool { !val }
const unsafe extern "stdcall" fn bar2(val: bool) -> bool { !val }
```
This can be used to const-ify an `extern fn`, or conversely, to make a `const fn` callable from external code.
r? T-lang
cc `@RalfJung`
Fix `clippy::useless_conversion`
Self-explanatory. Probably the last clippy change I'll actually put up since this is the only other one I've actually seen in the wild.
Simplify some nested `if` statements
Applies some but not all instances of `clippy::collapsible_if`. Some ended up looking worse afterwards, though, so I left those out. Also applies instances of `clippy::collapsible_else_if`
Review with whitespace disabled please.
Fix double handling in `collect_tokens`
Double handling of AST nodes can occur in `collect_tokens`. This is when an inner call to `collect_tokens` produces an AST node, and then an outer call to `collect_tokens` produces the same AST node. This can happen in a few places, e.g. expression statements where the statement delegates `HasTokens` and `HasAttrs` to the expression. It will also happen more after #124141.
This PR fixes some double handling cases that cause problems, including #129166.
r? `@petrochenkov`
Implement raw lifetimes and labels (`'r#ident`)
This PR does two things:
1. Reserve lifetime prefixes, e.g. `'prefix#lt` in edition 2021.
2. Implements raw lifetimes, e.g. `'r#async` in edition 2021.
This PR additionally extends the `keyword_idents_2024` lint to also check lifetimes.
cc `@traviscross`
r? parser
Add Suggestions for Misspelled Keywords
Fixes#97793
This PR detects misspelled keywords using two heuristics:
1. Lowercasing the unexpected identifier.
2. Using edit distance to find a keyword similar to the unexpected identifier.
However, it does not detect each and every misspelled keyword to
minimize false positives and ambiguities. More details about the
implementation can be found in the comments.
This PR detects misspelled keywords using two heuristics:
1. Lowercasing the unexpected identifier.
2. Using edit distance to find a keyword similar to the unexpected identifier.
However, it does not detect each and every misspelled keyword to
minimize false positives and ambiguities. More details about the
implementation can be found in the comments.
Don't make statement nonterminals match pattern nonterminals
Right now, the heuristic we use to check if a token may begin a pattern nonterminal falls back to `may_be_ident`:
ef71f1047e/compiler/rustc_parse/src/parser/nonterminal.rs (L21-L37)
This has the unfortunate side effect that a `stmt` nonterminal eagerly matches against a `pat` nonterminal, leading to a parse error:
```rust
macro_rules! m {
($pat:pat) => {};
($stmt:stmt) => {};
}
macro_rules! m2 {
($stmt:stmt) => {
m! { $stmt }
};
}
m2! { let x = 1 }
```
This PR fixes it by more accurately reflecting the set of nonterminals that may begin a pattern nonterminal.
As a side-effect, I modified `Token::can_begin_pattern` to work correctly and used that in `Parser::nonterminal_may_begin_with`.
By keeping track of attributes that have been previously processed.
This fixes the `macro-rules-derive-cfg.stdout` test, and is necessary
for #124141 which removes nonterminals.
Also shrink the `SmallVec` inline size used in `IntervalSet`. 2 gives
slightly better perf than 4 now that there's an `IntervalSet` in
`Parser`, which is cloned reasonably often.
In a case like this:
```
mod a {
mod b {
#[cfg_attr(unix, inline)]
fn f() {
#[cfg_attr(linux, inline)]
fn g1() {}
#[cfg_attr(linux, inline)]
fn g2() {}
}
}
}
```
We currently end up with the following replacement ranges.
- The lazy tokens for `f` has replacement ranges for `g1` and `g2`.
- The lazy tokens for `a` has replacement ranges for `f`, `g1`, and
`g2`.
I.e. the replacement ranges for `g1` and `g2` are duplicated. In
general, replacement ranges for inner AST nodes are duplicated up the
chain for each nested `collect_tokens` call. And the code that processes
the replacements is careful about the ordering in which the replacements
are applied, to ensure that inner replacements are applied before outer
replacements.
But all of this is unnecessary. If you apply an inner replacement and
then an outer replacement, the outer replacement completely overwrites
the inner replacement.
This commit avoids the duplication by removing replacements from
`self.capture_state.parser_replacements` when they are used. (The effect
on the example above is that the lazy tokesn for `a` no longer include
replacement ranges for `g1` and `g2`.) This eliminates the possibility
of nested replacements on individual AST nodes, which avoids the need
for careful ordering of replacements.
This example triggers an assertion failure:
```
fn f() -> u32 {
#[cfg_eval] #[cfg(not(FALSE))] 0
}
```
The sequence of events:
- `configure_annotatable` calls `parse_expr_force_collect`, which calls
`collect_tokens`.
- Within that, we end up in `parse_expr_dot_or_call`, which again calls
`collect_tokens`.
- The return value of the `f` call is the expression `0`.
- This inner call collects tokens for `0` (parser range 10..11) and
creates a replacement covering `#[cfg(not(FALSE))] 0` (parser range
0..11).
- We return to the outer `collect_tokens` call. The return value of the
`f` call is *again* the expression `0`, again with the range 10..11,
but the replacement from earlier covers the range 0..11. The code
mistakenly assumes that any attributes from an inner `collect_tokens`
call fit entirely within the body of the result of an outer
`collect_tokens` call. So it adjusts the replacement parser range
0..11 to a node range by subtracting 10, resulting in -10..1. This is
an invalid range and triggers an assertion failure.
It's tricky to follow, but basically things get complicated when an AST
node is returned from an inner `collect_tokens` call and then returned
again from an outer `collect_token` node without being wrapped in any
kind of additional layer.
This commit changes `collect_tokens` to return early in some extra cases,
avoiding the construction of lazy tokens. In the example above, the
outer `collect_tokens` returns earlier because the `0` token already has
tokens and `self.capture_state.capturing` is `Capturing::No`. This early
return avoids the creation of the invalid range and the assertion
failure.
Fixes#129166. Note: these invalid ranges have been happening for a long
time. #128725 looks like it's at fault only because it introduced the
assertion that catches the invalid ranges.
Stabilize opaque type precise capturing (RFC 3617)
This PR partially stabilizes opaque type *precise capturing*, which was specified in [RFC 3617](https://github.com/rust-lang/rfcs/pull/3617), and whose syntax was amended by FCP in [#125836](https://github.com/rust-lang/rust/issues/125836).
This feature, as stabilized here, gives us a way to explicitly specify the generic lifetime parameters that an RPIT-like opaque type captures. This solves the problem of overcapturing, for lifetime parameters in these opaque types, and will allow the Lifetime Capture Rules 2024 ([RFC 3498](https://github.com/rust-lang/rfcs/pull/3498)) to be fully stabilized for RPIT in Rust 2024.
### What are we stabilizing?
This PR stabilizes the use of a `use<'a, T>` bound in return-position impl Trait opaque types. Such a bound fully specifies the set of generic parameters captured by the RPIT opaque type, entirely overriding the implicit default behavior. E.g.:
```rust
fn does_not_capture<'a, 'b>() -> impl Sized + use<'a> {}
// ~~~~~~~~~~~~~~~~~~~~
// This RPIT opaque type does not capture `'b`.
```
The way we would suggest thinking of `impl Trait` types *without* an explicit `use<..>` bound is that the `use<..>` bound has been *elided*, and that the bound is filled in automatically by the compiler according to the edition-specific capture rules.
All non-`'static` lifetime parameters, named (i.e. non-APIT) type parameters, and const parameters in scope are valid to name, including an elided lifetime if such a lifetime would also be valid in an outlives bound, e.g.:
```rust
fn elided(x: &u8) -> impl Sized + use<'_> { x }
```
Lifetimes must be listed before type and const parameters, but otherwise the ordering is not relevant to the `use<..>` bound. Captured parameters may not be duplicated. For now, only one `use<..>` bound may appear in a bounds list. It may appear anywhere within the bounds list.
### How does this differ from the RFC?
This stabilization differs from the RFC in one respect: the RFC originally specified `use<'a, T>` as syntactically part of the RPIT type itself, e.g.:
```rust
fn capture<'a>() -> impl use<'a> Sized {}
```
However, settling on the final syntax was left as an open question. T-lang later decided via FCP in [#125836](https://github.com/rust-lang/rust/issues/125836) to treat `use<..>` as a syntactic bound instead, e.g.:
```rust
fn capture<'a>() -> impl Sized + use<'a> {}
```
### What aren't we stabilizing?
The key goal of this PR is to stabilize the parts of *precise capturing* that are needed to enable the migration to Rust 2024.
There are some capabilities of *precise capturing* that the RFC specifies but that we're not stabilizing here, as these require further work on the type system. We hope to lift these limitations later.
The limitations that are part of this PR were specified in the [RFC's stabilization strategy](https://rust-lang.github.io/rfcs/3617-precise-capturing.html#stabilization-strategy).
#### Not capturing type or const parameters
The RFC addresses the overcapturing of type and const parameters; that is, it allows for them to not be captured in opaque types. We're not stabilizing that in this PR. Since all in scope generic type and const parameters are implicitly captured in all editions, this is not needed for the migration to Rust 2024.
For now, when using `use<..>`, all in scope type and const parameters must be nameable (i.e., APIT cannot be used) and included as arguments. For example, this is an error because `T` is in scope and not included as an argument:
```rust
fn test<T>() -> impl Sized + use<> {}
//~^ ERROR `impl Trait` must mention all type parameters in scope in `use<...>`
```
This is due to certain current limitations in the type system related to how generic parameters are represented as captured (i.e. bivariance) and how inference operates.
We hope to relax this in the future, and this stabilization is forward compatible with doing so.
#### Precise capturing for return-position impl Trait **in trait** (RPITIT)
The RFC specifies precise capturing for RPITIT. We're not stabilizing that in this PR. Since RPITIT already adheres to the Lifetime Capture Rules 2024, this isn't needed for the migration to Rust 2024.
The effect of this is that the anonymous associated types created by RPITITs must continue to capture all of the lifetime parameters in scope, e.g.:
```rust
trait Foo<'a> {
fn test() -> impl Sized + use<Self>;
//~^ ERROR `use<...>` precise capturing syntax is currently not allowed in return-position `impl Trait` in traits
}
```
To allow this involves a meaningful amount of type system work related to adding variance to GATs or reworking how generics are represented in RPITITs. We plan to do this work separately from the stabilization. See:
- https://github.com/rust-lang/rust/pull/124029
Supporting precise capturing for RPITIT will also require us to implement a new algorithm for detecting refining capture behavior. This may involve looking through type parameters to detect cases where the impl Trait type in an implementation captures fewer lifetimes than the corresponding RPITIT in the trait definition, e.g.:
```rust
trait Foo {
fn rpit() -> impl Sized + use<Self>;
}
impl<'a> Foo for &'a () {
// This is "refining" due to not capturing `'a` which
// is implied by the trait's `use<Self>`.
fn rpit() -> impl Sized + use<>;
// This is not "refining".
fn rpit() -> impl Sized + use<'a>;
}
```
This stabilization is forward compatible with adding support for this later.
### The technical details
This bound is purely syntactical and does not lower to a [`Clause`](https://doc.rust-lang.org/1.79.0/nightly-rustc/rustc_middle/ty/type.ClauseKind.html) in the type system. For the purposes of the type system (and for the types team's curiosity regarding this stabilization), we have no current need to represent this as a `ClauseKind`.
Since opaques already capture a variable set of lifetimes depending on edition and their syntactical position (e.g. RPIT vs RPITIT), a `use<..>` bound is just a way to explicitly rather than implicitly specify that set of lifetimes, and this only affects opaque type lowering from AST to HIR.
### FCP plan
While there's much discussion of the type system here, the feature in this PR is implemented internally as a transformation that happens before lowering to the type system layer. We already support impl Trait types partially capturing the in scope lifetimes; we just currently only expose that implicitly.
So, in my (errs's) view as a types team member, there's nothing for types to weigh in on here with respect to the implementation being stabilized, and I'd suggest a lang-only proposed FCP (though we'll of course CC the team below).
### Authorship and acknowledgments
This stabilization report was coauthored by compiler-errors and TC.
TC would like to acknowledge the outstanding and speedy work that compiler-errors has done to make this feature happen.
compiler-errors thanks TC for authoring the RFC, for all of his involvement in this feature's development, and pushing the Rust 2024 edition forward.
### Open items
We're doing some things in parallel here. In signaling the intention to stabilize, we want to uncover any latent issues so we can be sure they get addressed. We want to give the maximum time for discussion here to happen by starting it while other remaining miscellaneous work proceeds. That work includes:
- [x] Look into `syn` support.
- https://github.com/dtolnay/syn/issues/1677
- https://github.com/dtolnay/syn/pull/1707
- [x] Look into `rustfmt` support.
- https://github.com/rust-lang/rust/pull/126754
- [x] Look into `rust-analyzer` support.
- https://github.com/rust-lang/rust-analyzer/issues/17598
- https://github.com/rust-lang/rust-analyzer/pull/17676
- [x] Look into `rustdoc` support.
- https://github.com/rust-lang/rust/issues/127228
- https://github.com/rust-lang/rust/pull/127632
- https://github.com/rust-lang/rust/pull/127658
- [x] Suggest this feature to RfL (a known nightly user).
- [x] Add a chapter to the edition guide.
- https://github.com/rust-lang/edition-guide/pull/316
- [x] Update the Reference.
- https://github.com/rust-lang/reference/pull/1577
### (Selected) implementation history
* https://github.com/rust-lang/rfcs/pull/3498
* https://github.com/rust-lang/rfcs/pull/3617
* https://github.com/rust-lang/rust/pull/123468
* https://github.com/rust-lang/rust/issues/125836
* https://github.com/rust-lang/rust/pull/126049
* https://github.com/rust-lang/rust/pull/126753Closes#123432.
cc `@rust-lang/lang` `@rust-lang/types`
`@rustbot` labels +T-lang +I-lang-nominated +A-impl-trait +F-precise_capturing
Tracking:
- https://github.com/rust-lang/rust/issues/123432
----
For the compiler reviewer, I'll leave some inline comments about diagnostics fallout :^)
r? compiler
Stabilize `unsafe_attributes`
# Stabilization report
## Summary
This is a tracking issue for the RFC 3325: unsafe attributes
We are stabilizing `#![feature(unsafe_attributes)]`, which makes certain attributes considered 'unsafe', meaning that they must be surrounded by an `unsafe(...)`, as in `#[unsafe(no_mangle)]`.
RFC: rust-lang/rfcs#3325
Tracking issue: #123757
## What is stabilized
### Summary of stabilization
Certain attributes will now be designated as unsafe attributes, namely, `no_mangle`, `export_name`, and `link_section` (stable only), and these attributes will need to be called by surrounding them in `unsafe(...)` syntax. On editions prior to 2024, this is simply an edition lint, but it will become a hard error in 2024. This also works in `cfg_attr`, but `unsafe` is not allowed for any other attributes, including proc-macros ones.
```rust
#[unsafe(no_mangle)]
fn a() {}
#[cfg_attr(any(), unsafe(export_name = "c"))]
fn b() {}
```
For a table showing the attributes that were considered to be included in the list to require unsafe, and subsequent reasoning about why each such attribute was or was not included, see [this comment here](https://github.com/rust-lang/rust/pull/124214#issuecomment-2124753464)
## Tests
The relevant tests are in `tests/ui/rust-2024/unsafe-attributes` and `tests/ui/attributes/unsafe`.
