various const parameter defaults improvements
Actually resolve names in const parameter defaults, fixing `struct Foo<const N: usize = { usize::MAX }>`.
---
Split generic parameter ban rib for types and consts, allowing
```rust
#![feature(const_generics_defaults)]
struct Q;
struct Foo<T = Q, const Q: usize = 3>(T);
```
---
Remove the type/const ordering restriction if `const_generics_defaults` is active, even if `const_generics` is not. allowing us to stabilize and test const param defaults separately.
---
Check well formedness of const parameter defaults, eagerly emitting an error for `struct Foo<const N: usize = { 0 - 1 }>`
---
Do not forbid const parameters in param defaults, allowing `struct Foo<const N: usize, T = [u8; N]>(T)` and `struct Foo<const N: usize, const M: usize = N>`. Note that this should not change anything which is stabilized, as on stable, type parameters must be in front of const parameters, which means that type parameter defaults are only allowed if no const parameters exist.
We still forbid generic parameters inside of const param types.
r? `@varkor` `@petrochenkov`
On stable, suggest removing `#![feature]` for features that have been stabilized
I don't know how to test this (https://rust-lang.zulipchat.com/#narrow/stream/182449-t-compiler.2Fhelp/topic/Run.20tests.20without.20enabling.20nightly.20features.3F). I confirmed locally that this gives the
appropriate help with `channel = "beta"`:
```
error[E0554]: `#![feature]` may not be used on the beta release channel
--> src/lib.rs:2:1
|
2 | #![feature(min_const_generics)]
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: remove the attribute
|
= help: the feature `min_const_generics` has been stable since 1.51.0 and no longer requires an attribute to enable
error[E0554]: `#![feature]` may not be used on the beta release channel
--> src/lib.rs:3:1
|
3 | #![feature(min_const_generics, min_specialization)]
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= help: the feature `min_const_generics` has been stable since 1.51.0 and no longer requires an attribute to enable
error[E0554]: `#![feature]` may not be used on the beta release channel
--> src/lib.rs:4:1
|
4 | #![feature(box_patterns)]
| ^^^^^^^^^^^^^^^^^^^^^^^^^
```
Closes https://github.com/rust-lang/rust/issues/83715.
Stablize `non-ascii-idents`
This is the stablization PR for RFC 2457. Currently this is waiting on fcp in [tracking issue](https://github.com/rust-lang/rust/issues/55467).
r? `@Manishearth`
This commit implements the idea of a new ABI for the WebAssembly target,
one called `"wasm"`. This ABI is entirely of my own invention
and has no current precedent, but I think that the addition of this ABI
might help solve a number of issues with the WebAssembly targets.
When `wasm32-unknown-unknown` was first added to Rust I naively
"implemented an abi" for the target. I then went to write `wasm-bindgen`
which accidentally relied on details of this ABI. Turns out the ABI
definition didn't match C, which is causing issues for C/Rust interop.
Currently the compiler has a "wasm32 bindgen compat" ABI which is the
original implementation I added, and it's purely there for, well,
`wasm-bindgen`.
Another issue with the WebAssembly target is that it's not clear to me
when and if the default C ABI will change to account for WebAssembly's
multi-value feature (a feature that allows functions to return multiple
values). Even if this does happen, though, it seems like the C ABI will
be guided based on the performance of WebAssembly code and will likely
not match even what the current wasm-bindgen-compat ABI is today. This
leaves a hole in Rust's expressivity in binding WebAssembly where given
a particular import type, Rust may not be able to import that signature
with an updated C ABI for multi-value.
To fix these issues I had the idea of a new ABI for WebAssembly, one
called `wasm`. The definition of this ABI is "what you write
maps straight to wasm". The goal here is that whatever you write down in
the parameter list or in the return values goes straight into the
function's signature in the WebAssembly file. This special ABI is for
intentionally matching the ABI of an imported function from the
environment or exporting a function with the right signature.
With the addition of a new ABI, this enables rustc to:
* Eventually remove the "wasm-bindgen compat hack". Once this
ABI is stable wasm-bindgen can switch to using it everywhere.
Afterwards the wasm32-unknown-unknown target can have its default ABI
updated to match C.
* Expose the ability to precisely match an ABI signature for a
WebAssembly function, regardless of what the C ABI that clang chooses
turns out to be.
* Continue to evolve the definition of the default C ABI to match what
clang does on all targets, since the purpose of that ABI will be
explicitly matching C rather than generating particular function
imports/exports.
Naturally this is implemented as an unstable feature initially, but it
would be nice for this to get stabilized (if it works) in the near-ish
future to remove the wasm32-unknown-unknown incompatibility with the C
ABI. Doing this, however, requires the feature to be on stable because
wasm-bindgen works with stable Rust.
I don't know how to test this. I confirmed locally that this gives the
appropriate help with `channel = "beta"`:
```
error[E0554]: `#![feature]` may not be used on the beta release channel
--> src/lib.rs:2:1
|
2 | #![feature(min_const_generics)]
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: remove the attribute
|
= help: the feature `min_const_generics` has been stable since 1.51.0 and no longer requires an attribute to enable
error[E0554]: `#![feature]` may not be used on the beta release channel
--> src/lib.rs:3:1
|
3 | #![feature(min_const_generics, min_specialization)]
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= help: the feature `min_const_generics` has been stable since 1.51.0 and no longer requires an attribute to enable
error[E0554]: `#![feature]` may not be used on the beta release channel
--> src/lib.rs:4:1
|
4 | #![feature(box_patterns)]
| ^^^^^^^^^^^^^^^^^^^^^^^^^
```
Rename `#[doc(spotlight)]` to `#[doc(notable_trait)]`
Fixes#80936.
"spotlight" is not a very specific or self-explaining name.
Additionally, the dialog that it triggers is called "Notable traits".
So, "notable trait" is a better name.
* Rename `#[doc(spotlight)]` to `#[doc(notable_trait)]`
* Rename `#![feature(doc_spotlight)]` to `#![feature(doc_notable_trait)]`
* Update documentation
* Improve documentation
r? `@Manishearth`
This currently creates a field which is always false on GenericParamDefKind for future use when
consts are permitted to have defaults
Update const_generics:default locations
Previously just ignored them, now actually do something about them.
Fix using type check instead of value
Add parsing
This adds all the necessary changes to lower const-generics defaults from parsing.
Change P<Expr> to AnonConst
This matches the arguments passed to instantiations of const generics, and makes it specific to
just anonymous constants.
Attempt to fix lowering bugs
StructField -> FieldDef ("field definition")
Field -> ExprField ("expression field", not "field expression")
FieldPat -> PatField ("pattern field", not "field pattern")
Also rename visiting and other methods working on them.
"spotlight" is not a very specific or self-explaining name.
Additionally, the dialog that it triggers is called "Notable traits".
So, "notable trait" is a better name.
* Rename `#[doc(spotlight)]` to `#[doc(notable_trait)]`
* Rename `#![feature(doc_spotlight)]` to `#![feature(doc_notable_trait)]`
* Update documentation
* Improve documentation
### Overview
This commit begins the implementation work for RFC 2945. For more
information, see the rendered RFC [1] and tracking issue [2].
A boolean `unwind` payload is added to the `C`, `System`, `Stdcall`,
and `Thiscall` variants, marking whether unwinding across FFI
boundaries is acceptable. The cases where each of these variants'
`unwind` member is true correspond with the `C-unwind`,
`system-unwind`, `stdcall-unwind`, and `thiscall-unwind` ABI strings
introduced in RFC 2945 [3].
### Feature Gate and Unstable Book
This commit adds a `c_unwind` feature gate for the new ABI strings.
Tests for this feature gate are included in `src/test/ui/c-unwind/`,
which ensure that this feature gate works correctly for each of the
new ABIs.
A new language features entry in the unstable book is added as well.
### Further Work To Be Done
This commit does not proceed to implement the new unwinding ABIs,
and is intentionally scoped specifically to *defining* the ABIs and
their feature flag.
### One Note on Test Churn
This will lead to some test churn, in re-blessing hash tests, as the
deleted comment in `src/librustc_target/spec/abi.rs` mentioned,
because we can no longer guarantee the ordering of the `Abi`
variants.
While this is a downside, this decision was made bearing in mind
that RFC 2945 states the following, in the "Other `unwind` Strings"
section [3]:
> More unwind variants of existing ABI strings may be introduced,
> with the same semantics, without an additional RFC.
Adding a new variant for each of these cases, rather than specifying
a payload for a given ABI, would quickly become untenable, and make
working with the `Abi` enum prone to mistakes.
This approach encodes the unwinding information *into* a given ABI,
to account for the future possibility of other `-unwind` ABI
strings.
### Ignore Directives
`ignore-*` directives are used in two of our `*-unwind` ABI test
cases.
Specifically, the `stdcall-unwind` and `thiscall-unwind` test cases
ignore architectures that do not support `stdcall` and
`thiscall`, respectively.
These directives are cribbed from
`src/test/ui/c-variadic/variadic-ffi-1.rs` for `stdcall`, and
`src/test/ui/extern/extern-thiscall.rs` for `thiscall`.
This would otherwise fail on some targets, see:
fcf697f902
### Footnotes
[1]: https://github.com/rust-lang/rfcs/blob/master/text/2945-c-unwind-abi.md
[2]: https://github.com/rust-lang/rust/issues/74990
[3]: https://github.com/rust-lang/rfcs/blob/master/text/2945-c-unwind-abi.md#other-unwind-abi-strings
Crate root is sufficiently different from `mod` items, at least at syntactic level.
Also remove customization point for "`mod` item or crate root" from AST visitors.
Add a new ABI to support cmse_nonsecure_call
This adds support for the `cmse_nonsecure_call` feature to be able to perform non-secure function call.
See the discussion on Zulip [here](https://rust-lang.zulipchat.com/#narrow/stream/131828-t-compiler/topic/Support.20for.20callsite.20attributes/near/223054928).
This is a followup to #75810 which added `cmse_nonsecure_entry`. As for that PR, I assume that the changes are small enough to not have to go through a RFC but I don't mind doing one if needed 😃
I did not yet create a tracking issue, but if most of it is fine, I can create one and update the various files accordingly (they refer to the other tracking issue now).
On the Zulip chat, I believe `@jonas-schievink` volunteered to be a reviewer 💯
This commit adds a new ABI to be selected via `extern
"C-cmse-nonsecure-call"` on function pointers in order for the compiler to
apply the corresponding cmse_nonsecure_call callsite attribute.
For Armv8-M targets supporting TrustZone-M, this will perform a
non-secure function call by saving, clearing and calling a non-secure
function pointer using the BLXNS instruction.
See the page on the unstable book for details.
Signed-off-by: Hugues de Valon <hugues.devalon@arm.com>
Suggest async {} for async || {}
Fixes#76011
This adds support for adding help diagnostics to the feature gating checks and
then uses it for the async_closure gate to add the extra bit of help
information as described in the issue.
- Adds optional default values to const generic parameters in the AST
and HIR
- Parses these optional default values
- Adds a `const_generics_defaults` feature gate
Clarify the 'default is only allowed on...' error
Code like
impl Foo {
default fn foo() {}
}
will trigger the error
error: `default` is only allowed on items in `impl` definitions
--> src/lib.rs:5:5
|
5 | default fn foo() {}
| -------^^^^^^^^^
| |
| `default` because of this
but that's very confusing! I *did* put it on an item in an impl!
So this commit changes the message to
error: `default` is only allowed on items in trait impls
--> src/lib.rs:5:5
|
5 | default fn foo() {}
| -------^^^^^^^^^
| |
| `default` because of this
Code like
impl Foo {
default fn foo() {}
}
will trigger the error
error: `default` is only allowed on items in `impl` definitions
--> src/lib.rs:5:5
|
5 | default fn foo() {}
| -------^^^^^^^^^
| |
| `default` because of this
but that's very confusing! I *did* put it on an item in an impl!
So this commit changes the message to
error: `default` is only allowed on items in trait impls
--> src/lib.rs:5:5
|
5 | default fn foo() {}
| -------^^^^^^^^^
| |
| `default` because of this
Properly handle attributes on statements
We now collect tokens for the underlying node wrapped by `StmtKind`
nstead of storing tokens directly in `Stmt`.
`LazyTokenStream` now supports capturing a trailing semicolon after it
is initially constructed. This allows us to avoid refactoring statement
parsing to wrap the parsing of the semicolon in `parse_tokens`.
Attributes on item statements
(e.g. `fn foo() { #[bar] struct MyStruct; }`) are now treated as
item attributes, not statement attributes, which is consistent with how
we handle attributes on other kinds of statements. The feature-gating
code is adjusted so that proc-macro attributes are still allowed on item
statements on stable.
Two built-in macros (`#[global_allocator]` and `#[test]`) needed to be
adjusted to support being passed `Annotatable::Stmt`.
They were originally called "opt-in, built-in traits" (OIBITs), but
people realized that the name was too confusing and a mouthful, and so
they were renamed to just "auto traits". The feature flag's name wasn't
updated, though, so that's what this PR does.
There are some other spots in the compiler that still refer to OIBITs,
but I don't think changing those now is worth it since they are internal
and not particularly relevant to this PR.
Also see <https://rust-lang.zulipchat.com/#narrow/stream/131828-t-compiler/topic/opt-in.2C.20built-in.20traits.20(auto.20traits).20feature.20name>.
Implement destructuring assignment for structs and slices
This is the second step towards implementing destructuring assignment (RFC: rust-lang/rfcs#2909, tracking issue: #71126). This PR is the second part of #71156, which was split up to allow for easier review.
Note that the first PR (#78748) is not merged yet, so it is included as the first commit in this one. I thought this would allow the review to start earlier because I have some time this weekend to respond to reviews. If ``@petrochenkov`` prefers to wait until the first PR is merged, I totally understand, of course.
This PR implements destructuring assignment for (tuple) structs and slices. In order to do this, the following *parser change* was necessary: struct expressions are not required to have a base expression, i.e. `Struct { a: 1, .. }` becomes legal (in order to act like a struct pattern).
Unfortunately, this PR slightly regresses the diagnostics implemented in #77283. However, it is only a missing help message in `src/test/ui/issues/issue-77218.rs`. Other instances of this diagnostic are not affected. Since I don't exactly understand how this help message works and how to fix it yet, I was hoping it's OK to regress this temporarily and fix it in a follow-up PR.
Thanks to ``@varkor`` who helped with the implementation, particularly around the struct rest changes.
r? ``@petrochenkov``
rustc_target: Further cleanup use of target options
Follow up to https://github.com/rust-lang/rust/pull/77729.
Implements items 2 and 4 from the list in https://github.com/rust-lang/rust/pull/77729#issue-500228243.
The first commit collapses uses of `target.options.foo` into `target.foo`.
The second commit renames some target options to avoid tautology:
`target.target_endian` -> `target.endian`
`target.target_c_int_width` -> `target.c_int_width`
`target.target_os` -> `target.os`
`target.target_env` -> `target.env`
`target.target_vendor` -> `target.vendor`
`target.target_family` -> `target.os_family`
`target.target_mcount` -> `target.mcount`
r? `@Mark-Simulacrum`
with an eye on merging `TargetOptions` into `Target`.
`TargetOptions` as a separate structure is mostly an implementation detail of `Target` construction, all its fields logically belong to `Target` and available from `Target` through `Deref` impls.
Preparation for a subsequent change that replaces
rustc_target::config::Config with its wrapped Target.
On its own, this commit breaks the build. I don't like making
build-breaking commits, but in this instance I believe that it
makes review easier, as the "real" changes of this PR can be
seen much more easily.
Result of running:
find compiler/ -type f -exec sed -i -e 's/target\.target\([)\.,; ]\)/target\1/g' {} \;
find compiler/ -type f -exec sed -i -e 's/target\.target$/target/g' {} \;
find compiler/ -type f -exec sed -i -e 's/target.ptr_width/target.pointer_width/g' {} \;
./x.py fmt
Fixes#76011
This adds support for adding help diagnostics to the feature gating checks and
then uses it for the async_closure gate to add the extra bit of help
information as described in the issue.
