NVPTX: Avoid PassMode::Direct for args in C abi
Fixes#117480
I must admit that I'm confused about `PassMode` altogether, is there a good sum-up threads for this anywhere? I'm especially confused about how "indirect" and "byval" goes together. To me it seems like "indirect" basically means "use a indirection through a pointer", while "byval" basically means "do not use indirection through a pointer".
The return used to keep `PassMode::Direct` for small aggregates. It turns out that `make_indirect` messes up the tests and one way to fix it is to keep `PassMode::Direct` for all aggregates. I have mostly seen this PassMode mentioned for args. Is it also a problem for returns? When experimenting with `byval` as an alternative i ran into [this assert](61a3eea804/compiler/rustc_codegen_llvm/src/abi.rs (L463C22-L463C22))
I have added tests for the same kind of types that is already tested for the "ptx-kernel" abi. The tests cannot be enabled until something like #117458 is completed and merged.
CC: ``@RalfJung`` since you seem to be the expert on this and have already helped me out tremendously
CC: ``@RDambrosio016`` in case this influence your work on `rustc_codegen_nvvm`
``@rustbot`` label +O-NVPTX
Omit non-needs_drop drop_in_place in vtables
This replaces the drop_in_place reference with null in vtables. On librustc_driver.so, this drops about ~17k (11%) dynamic relocations from the output, since many vtables can now be placed in read-only memory, rather than having a relocated pointer included.
This makes a tradeoff by adding a null check at vtable call sites. I'm not sure that's readily avoidable without changing the vtable format (e.g., so that we can use a pc-relative relocation instead of an absolute address, and avoid the dynamic relocation that way). But it seems likely that the check is cheap at runtime.
Accepted MCP: https://github.com/rust-lang/compiler-team/issues/730
When encountering `use foo::*;` where `foo` fails to be found, and we later
encounter resolution errors, we silence those later errors.
A single case of the above, for an *existing* import on a big codebase would
otherwise have a huge number of knock-down spurious errors.
Ideally, instead of a global flag to silence all subsequent resolve errors,
we'd want to introduce an unameable binding in the appropriate rib as a
sentinel when there's a failed glob import, so when we encounter a resolve
error we can search for that sentinel and if found, and only then, silence
that error. The current approach is just a quick proof of concept to
iterate over.
Partially address #96799.
This adds the `only-apple`/`ignore-apple` compiletest directive, and
uses that basically everywhere instead of `only-macos`/`ignore-macos`.
Some of the updates in `run-make` are a bit redundant, as they use
`ignore-cross-compile` and won't run on iOS - but using Apple in these
is still more correct, so I've made that change anyhow.
`-Znext-solver`: eagerly normalize when adding goals
fixes#125269. I am not totally with this fix and going to keep this open until we have a more general discussion about how to handle hangs caused by lazy norm in the new solver.
We still check for the `rental`/`allsorts-rental` crates. But now if
they are detected we just emit a fatal error, instead of emitting a
warning and providing alternative behaviour.
The original "hack" implementing alternative behaviour was added
in #73345.
The lint was added in #83127.
The tracking issue is #83125.
The direct motivation for the change is that providing the alternative
behaviour is interfering with #125174 and follow-on work.
Rollup of 4 pull requests
Successful merges:
- #125339 (The number of tests does not depend on the architecture's pointer width)
- #125542 (Migrate rustdoc verify output files)
- #125616 (MIR validation: ensure that downcast projection is followed by field projection)
- #125625 (Use grep to implement verify-line-endings)
Failed merges:
- #125573 (Migrate `run-make/allow-warnings-cmdline-stability` to `rmake.rs`)
r? `@ghost`
`@rustbot` modify labels: rollup
This replaces the drop_in_place reference with null in vtables. On
librustc_driver.so, this drops about ~17k dynamic relocations from the
output, since many vtables can now be placed in read-only memory, rather
than having a relocated pointer included.
This makes a tradeoff by adding a null check at vtable call sites.
That's hard to avoid without changing the vtable format (e.g., to use a
pc-relative relocation instead of an absolute address, and avoid the
dynamic relocation that way). But it seems likely that the check is
cheap at runtime.
rustdoc: Clarify const-stability with regard to normal stability
Fixes#125511.
- Elide const-unstable if also unstable overall
- Show "const" for const-unstable if also overall unstable
drop region constraints for ambiguous goals
See the comment in `compute_external_query_constraints`. While the underlying issue is preexisting, this fixes a bug introduced by #125343.
It slightly weakens the leak chec, even if we didn't have any test which was affected. I want to write such a test before merging this PR.
r? `@compiler-errors`
[perf] Delay the construction of early lint diag structs
Attacks some of the perf regressions from https://github.com/rust-lang/rust/pull/124417#issuecomment-2123700666.
See individual commits for details. The first three commits are not strictly necessary.
However, the 2nd one (06bc4fc671, *Remove `LintDiagnostic::msg`*) makes the main change way nicer to implement.
It's also pretty sweet on its own if I may say so myself.
Remove `DefId` from `EarlyParamRegion`
Currently we represent usages of `Region` parameters via the `ReEarlyParam` or `ReLateParam` variants. The `ReEarlyParam` is effectively equivalent to `TyKind::Param` and `ConstKind::Param` (i.e. it stores a `Symbol` and a `u32` index) however it also stores a `DefId` for the definition of the lifetime parameter.
This was used in roughly two places:
- Borrowck diagnostics instead of threading the appropriate `body_id` down to relevant locations. Interestingly there were already some places that had to pass down a `DefId` manually.
- Some opaque type checking logic was using the `DefId` field to track captured lifetimes
I've split this PR up into a commit for generate rote changes to diagnostics code to pass around a `DefId` manually everywhere, and another commit for the opaque type related changes which likely require more careful review as they might change the semantics of lints/errors.
Instead of manually passing the `DefId` around everywhere I previously tried to bundle it in with `TypeErrCtxt` but ran into issues with some call sites of `infcx.err_ctxt` being unable to provide a `DefId`, particularly places involved with trait solving and normalization. It might be worth investigating adding some new wrapper type to pass this around everywhere but I think this might be acceptable for now.
This pr also has the effect of reducing the size of `EarlyParamRegion` from 16 bytes -> 8 bytes. I wouldn't expect this to have any direct performance improvement however, other variants of `RegionKind` over `8` bytes are all because they contain a `BoundRegionKind` which is, as far as I know, mostly there for diagnostics. If we're ever able to remove this it would shrink the `RegionKind` type from `24` bytes to `12` (and with clever bit packing we might be able to get it to `8` bytes). I am curious what the performance impact would be of removing interning of `Region`'s if we ever manage to shrink `RegionKind` that much.
Sidenote: by removing the `DefId` the `Debug` output for `Region` has gotten significantly nicer. As an example see this opaque type debug print before vs after this PR:
`Opaque(DefId(0:13 ~ impl_trait_captures[aeb9]::foo::{opaque#0}), [DefId(0:9 ~ impl_trait_captures[aeb9]::foo::'a)_'a/#0, T, DefId(0:9 ~ impl_trait_captures[aeb9]::foo::'a)_'a/#0])`
`Opaque(DefId(0:13 ~ impl_trait_captures[aeb9]::foo::{opaque#0}), ['a/#0, T, 'a/#0])`
r? `@compiler-errors` (I would like someone who understands the opaque type setup to atleast review the type system commit, but the rest is likely reviewable by anyone)
If a const function is unstable overall (and thus, in all circumstances
I know of, also const-unstable), we should show the option to use it as
const. You need to enable a feature to use the function at all anyway.
If the function is stabilized without also being const-stabilized, then
we do not show the const keyword and instead show "const: unstable" in
the version info.
Don't skip out of inner const when looking for body for suggestion
Self-explanatory title, I'll point out the important logic in an inline comment.
Fixes#125370
Don't continue probing for method if in suggestion and autoderef hits ambiguity
The title is somewhat self-explanatory. When we hit ambiguity in method autoderef steps, we previously would continue to probe for methods if we were giving a suggestion. This seems useless, and causes an ICE when we are not able to unify the receiver later on in confirmation.
Fixes#125432
Support C23's Variadics Without a Named Parameter
Fixes#123773
This PR removes the static check that disallowed extern functions
with ellipsis (varargs) as the only parameter since this is now
valid in C23.
This will not break any existing code as mentioned in the proposal
document: https://www.open-std.org/jtc1/sc22/wg14/www/docs/n2975.pdf.
Also, adds a doc comment for `check_decl_cvariadic_pos()` and
fixes the name of the function (`varadic` -> `variadic`).
Turn remaining non-structural-const-in-pattern lints into hard errors
This completes the implementation of https://github.com/rust-lang/rust/issues/120362 by turning our remaining future-compat lints into hard errors: indirect_structural_match and pointer_structural_match.
They have been future-compat lints for a while (indirect_structural_match for many years, pointer_structural_match since Rust 1.75 (released Dec 28, 2023)), and have shown up in dependency breakage reports since Rust 1.78 (just released on May 2, 2024). I don't expect a lot of code will still depend on them, but we will of course do a crater run.
A lot of cleanup is now possible in const_to_pat, but that is deferred to a later PR.
Fixes https://github.com/rust-lang/rust/issues/70861
It's confusing because if a function is unstable overall, there's no
need to highlight the constness is also unstable. Technically, these
attributes (overall stability and const-stability) are separate, but in
practice, we don't even show the const-unstable's feature flag (it's
normally the same as the overall function).
Stabilize `LazyCell` and `LazyLock`
Closes#109736
This stabilizes the [`LazyLock`](https://doc.rust-lang.org/stable/std/sync/struct.LazyLock.html) and [`LazyCell`](https://doc.rust-lang.org/stable/std/cell/struct.LazyCell.html) types:
```rust
static HASHMAP: LazyLock<HashMap<i32, String>> = LazyLock::new(|| {
println!("initializing");
let mut m = HashMap::new();
m.insert(13, "Spica".to_string());
m.insert(74, "Hoyten".to_string());
m
});
let lazy: LazyCell<i32> = LazyCell::new(|| {
println!("initializing");
92
});
```
r? libs-api
Add assert_unsafe_precondition to unchecked_{add,sub,neg,mul,shl,shr} methods
(Old PR is haunted, opening a new one. See #117494 for previous discussion.)
This ensures that these preconditions are actually checked in debug mode, and hopefully should let people know if they messed up. I've also replaced the calls (I could find) in the code that use these intrinsics directly with those that use these methods, so that the asserts actually apply.
More discussions on people misusing these methods in the tracking issue: https://github.com/rust-lang/rust/issues/85122.
Add manual Sync impl for ReentrantLockGuard
Fixes: #125526
Tracking Issue: #121440
this impl is even shown in the summary in the tracking issue, but apparently was forgotten in the actual implementation
Fail relating constants of different types
fixes#121585fixes#121858fixes#124151
I gave this several attempts before, but we lost too many important diagnostics until I managed to make compilation never bail out early. We have reached this point, so now we can finally fix all those ICEs by bubbling up an error instead of continueing when we encounter a bug.
The body of these benchmarks is close to empty but not literally empty.
This was making the runtime of the benchmarks (which are compiled
without optimizations!) flicker between 9 ns and 10 ns runtime, which
changes the padding and breaks the test. Recent changes to the standard
library have pushed the runtime closer to 10 ns when unoptimized, which
is why we haven't seen such failures before in CI.
Contributors can also induce such failures before this PR by running the
run-make tests while the system is under heavy load.
Warn (or error) when `Self` ctor from outer item is referenced in inner nested item
This implements a warning `SELF_CONSTRUCTOR_FROM_OUTER_ITEM` when a self constructor from an outer impl is referenced in an inner nested item. This is a proper fix mentioned https://github.com/rust-lang/rust/pull/117246#discussion_r1374648388.
This warning is additionally bumped to a hard error when the self type references generic parameters, since it's almost always going to ICE, and is basically *never* correct to do.
This also reverts part of https://github.com/rust-lang/rust/pull/117246, since I believe this is the proper fix and we shouldn't need the helper functions (`opt_param_at`/`opt_type_param`) any longer, since they shouldn't really ever be used in cases where we don't have this problem.
Resolve anon const's parent predicates to direct parent instead of opaque's parent
When an anon const is inside of an opaque, #99801 added a hack to resolve the anon const's parent predicates *not* to the opaque's predicates, but to the opaque's *parent's* predicates. This is insufficient when considering nested opaques.
This means that the `predicates_of` an anon const might reference duplicated lifetimes (installed by `compute_bidirectional_outlives_predicates`) when computing known outlives in MIR borrowck, leading to these ICEs:
Fixes#121574Fixes#118403
~~Instead, we should be using the `OpaqueTypeOrigin` to acquire the owner item (fn/type alias/etc) of the opaque, whose predicates we're fine to mention.~~
~~I think it's a bit sketchy that we're doing this at all, tbh; I think it *should* be fine for the anon const to inherit the predicates of the opaque it's located inside. However, that would also mean that we need to make sure the `generics_of` that anon const line up in the same way.~~
~~None of this is important to solve right now; I just want to fix these ICEs so we can land #125468, which accidentally fixes these issues in a different and unrelated way.~~
edit: We don't need this special case anyways because we install the right parent item in `generics_of` anyways:
213ad10c8f/compiler/rustc_hir_analysis/src/collect/generics_of.rs (L150)
r? `@BoxyUwU`
Only suppress binop error in favor of semicolon suggestion if we're in an assignment statement
Similar to #123722, we are currently too aggressive when delaying a binop error with the expectation that we'll emit another error elsewhere. This adjusts that heuristic to be more accurate, at the cost of some possibly poorer suggestions.
Fixes#125458
Don't suggest adding the unexpected cfgs to the build-script it-self
This PR adds a check to avoid suggesting to add the unexpected cfgs inside the build-script when building the build-script it-self, as it won't have any effect, since build-scripts applies to their descended target.
Fixes#125368
Migrate `run-make/issue-53964` to `rmake`
Part of #121876 and the associated [Google Summer of Code project](https://blog.rust-lang.org/2024/05/01/gsoc-2024-selected-projects.html).
This is extremely similar to #125146. Could it be interesting to merge the two in some way? This one seems to do the same thing as the #125146, but with an added check that a useless lint is not shown.
We already handle this case this way on the coherence side, and it matches the new solver's behaviour. While there is some breakage around type-alias-impl-trait (see new "type annotations needed" in tests/ui/type-alias-impl-trait/issue-84660-unsoundness.rs), no stable code breaks, and no new stable code is accepted.
Rewrite native thread-local storage
(part of #110897)
The current native thread-local storage implementation has become quite messy, uses indescriptive names and unnecessarily adds code to the macro expansion. This PR tries to fix that by using a new implementation that also allows more layout optimizations and potentially increases performance by eliminating unnecessary TLS accesses.
This does not change the recursive initialization behaviour I described in [this comment](https://github.com/rust-lang/rust/issues/110897#issuecomment-1525705682), so it should be a library-only change. Changing that behaviour should be quite easy now, however.
r? `@m-ou-se`
`@rustbot` label +T-libs
Rewrite `core-no-oom-handling`, `issue-24445` and `issue-38237` `run-make` tests to new `rmake.rs` format
Part of #121876 and the associated [Google Summer of Code project](https://blog.rust-lang.org/2024/05/01/gsoc-2024-selected-projects.html).
The test which is now called `non-pie-thread-local` has an unexplained "only-linux" flag. Could it be worth trying to remove it and changing the CI to test non-Linux platforms on it?
Use correct param-env in `MissingCopyImplementations`
We shouldn't assume the param-env is empty for this lint, since although we check the struct has no parameters, there still may be trivial where-clauses.
fixes#125394
Cleanup: Fix up some diagnostics
Several diagnostics contained their error code inside their primary message which is no bueno.
This PR moves them out of the message and turns them into structured error codes.
Also fixes another occurrence of `->` after a selector in a Fluent message which is not correct. I've fixed two other instances of this issue in #104345 (2022) but didn't update all instances as I've noted here: https://github.com/rust-lang/rust/pull/104345#issuecomment-1312705977 (“the future is now!”).
Allow coercing functions whose signature differs in opaque types in their defining scope into a shared function pointer type
r? `@compiler-errors`
This accepts more code on stable. It is now possible to have match arms return a function item `foo` and a different function item `bar` in another, and that will constrain OpaqueTypeInDefiningScope to have the hidden type ConcreteType and make the type of the match arms a function pointer that matches the signature. So the following function will now compile, but on master it errors with a type mismatch on the second match arm
```rust
fn foo<T>(t: T) -> T {
t
}
fn bar<T>(t: T) -> T {
t
}
fn k() -> impl Sized {
fn bind<T, F: FnOnce(T) -> T>(_: T, f: F) -> F {
f
}
let x = match true {
true => {
let f = foo;
bind(k(), f)
}
false => bar::<()>,
};
todo!()
}
```
cc https://github.com/rust-lang/rust/issues/116652
This is very similar to https://github.com/rust-lang/rust/pull/123794, and with the same rationale:
> this is for consistency with `-Znext-solver`. the new solver does not have the concept of "non-defining use of opaque" right now and we would like to ideally keep it that way. Moving to `DefineOpaqueTypes::Yes` in more cases removes subtlety from the type system. Right now we have to be careful when relating `Opaque` with another type as the behavior changes depending on whether we later use the `Opaque` or its hidden type directly (even though they are equal), if that later use is with `DefineOpaqueTypes::No`*
Expand `for_loops_over_fallibles` lint to lint on fallibles behind references.
Extends the scope of the (warn-by-default) lint `for_loops_over_fallibles` from just `for _ in x` where `x: Option<_>/Result<_, _>` to also cover `x: &(mut) Option<_>/Result<_>`
```rs
fn main() {
// Current lints
for _ in Some(42) {}
for _ in Ok::<_, i32>(42) {}
// New lints
for _ in &Some(42) {}
for _ in &mut Some(42) {}
for _ in &Ok::<_, i32>(42) {}
for _ in &mut Ok::<_, i32>(42) {}
// Should not lint
for _ in Some(42).into_iter() {}
for _ in Some(42).iter() {}
for _ in Some(42).iter_mut() {}
for _ in Ok::<_, i32>(42).into_iter() {}
for _ in Ok::<_, i32>(42).iter() {}
for _ in Ok::<_, i32>(42).iter_mut() {}
}
```
<details><summary><code>cargo build</code> diff</summary>
```diff
diff --git a/old.out b/new.out
index 84215aa..ca195a7 100644
--- a/old.out
+++ b/new.out
`@@` -1,33 +1,93 `@@`
warning: for loop over an `Option`. This is more readably written as an `if let` statement
--> src/main.rs:3:14
|
3 | for _ in Some(42) {}
| ^^^^^^^^
|
= note: `#[warn(for_loops_over_fallibles)]` on by default
help: to check pattern in a loop use `while let`
|
3 | while let Some(_) = Some(42) {}
| ~~~~~~~~~~~~~~~ ~~~
help: consider using `if let` to clear intent
|
3 | if let Some(_) = Some(42) {}
| ~~~~~~~~~~~~ ~~~
warning: for loop over a `Result`. This is more readably written as an `if let` statement
--> src/main.rs:4:14
|
4 | for _ in Ok::<_, i32>(42) {}
| ^^^^^^^^^^^^^^^^
|
help: to check pattern in a loop use `while let`
|
4 | while let Ok(_) = Ok::<_, i32>(42) {}
| ~~~~~~~~~~~~~ ~~~
help: consider using `if let` to clear intent
|
4 | if let Ok(_) = Ok::<_, i32>(42) {}
| ~~~~~~~~~~ ~~~
-warning: `for-loops-over-fallibles` (bin "for-loops-over-fallibles") generated 2 warnings
- Finished `dev` profile [unoptimized + debuginfo] target(s) in 0.04s
+warning: for loop over a `&Option`. This is more readably written as an `if let` statement
+ --> src/main.rs:7:14
+ |
+7 | for _ in &Some(42) {}
+ | ^^^^^^^^^
+ |
+help: to check pattern in a loop use `while let`
+ |
+7 | while let Some(_) = &Some(42) {}
+ | ~~~~~~~~~~~~~~~ ~~~
+help: consider using `if let` to clear intent
+ |
+7 | if let Some(_) = &Some(42) {}
+ | ~~~~~~~~~~~~ ~~~
+
+warning: for loop over a `&mut Option`. This is more readably written as an `if let` statement
+ --> src/main.rs:8:14
+ |
+8 | for _ in &mut Some(42) {}
+ | ^^^^^^^^^^^^^
+ |
+help: to check pattern in a loop use `while let`
+ |
+8 | while let Some(_) = &mut Some(42) {}
+ | ~~~~~~~~~~~~~~~ ~~~
+help: consider using `if let` to clear intent
+ |
+8 | if let Some(_) = &mut Some(42) {}
+ | ~~~~~~~~~~~~ ~~~
+
+warning: for loop over a `&Result`. This is more readably written as an `if let` statement
+ --> src/main.rs:9:14
+ |
+9 | for _ in &Ok::<_, i32>(42) {}
+ | ^^^^^^^^^^^^^^^^^
+ |
+help: to check pattern in a loop use `while let`
+ |
+9 | while let Ok(_) = &Ok::<_, i32>(42) {}
+ | ~~~~~~~~~~~~~ ~~~
+help: consider using `if let` to clear intent
+ |
+9 | if let Ok(_) = &Ok::<_, i32>(42) {}
+ | ~~~~~~~~~~ ~~~
+
+warning: for loop over a `&mut Result`. This is more readably written as an `if let` statement
+ --> src/main.rs:10:14
+ |
+10 | for _ in &mut Ok::<_, i32>(42) {}
+ | ^^^^^^^^^^^^^^^^^^^^^
+ |
+help: to check pattern in a loop use `while let`
+ |
+10 | while let Ok(_) = &mut Ok::<_, i32>(42) {}
+ | ~~~~~~~~~~~~~ ~~~
+help: consider using `if let` to clear intent
+ |
+10 | if let Ok(_) = &mut Ok::<_, i32>(42) {}
+ | ~~~~~~~~~~ ~~~
+
+warning: `for-loops-over-fallibles` (bin "for-loops-over-fallibles") generated 6 warnings
+ Finished `dev` profile [unoptimized + debuginfo] target(s) in 0.02s
```
</details>
-----
Question:
* ~~Currently, the article `an` is used for `&Option`, and `&mut Option` in the lint diagnostic, since that's what `Option` uses. Is this okay or should it be changed? (likewise, `a` is used for `&Result` and `&mut Result`)~~ The article `a` is used for `&Option`, `&mut Option`, `&Result`, `&mut Result` and (as before) `Result`. Only `Option` uses `an` (as before).
`@rustbot` label +A-lint
Fix OutsideLoop's error suggestion: adding label `'block` for `if` block.
For OutsideLoop we should not suggest add `'block` label in `if` block, or we wiil get another err: block label not supported here.
fixes#123261
Add some tests for public-private dependencies.
This adds some tests to show more scenarios for the `exported_private_dependencies` lint. Several of these illustrate that the lint is not working as expected, and I have annotated those places with `FIXME`.
Note also that this includes some diamond dependency structures which compiletest doesn't exactly support. However, I don't think it should be a problem, it just results in the common dependency being built twice.
* instead simply set the primary message inside the lint decorator functions
* it used to be this way before [#]101986 which introduced `msg` to prevent
good path delayed bugs (which no longer exist) from firing under certain
circumstances when lints were suppressed / silenced
* this is no longer necessary for various reasons I presume
* it shaves off complexity and makes further changes easier to implement
Rollup of 7 pull requests
Successful merges:
- #125043 (reference type safety invariant docs: clarification)
- #125306 (Force the inner coroutine of an async closure to `move` if the outer closure is `move` and `FnOnce`)
- #125355 (Use Backtrace::force_capture instead of Backtrace::capture in rustc_log)
- #125382 (rustdoc: rename `issue-\d+.rs` tests to have meaningful names (part 7))
- #125391 (Minor serialize/span tweaks)
- #125395 (Remove unnecessary `.md` from the documentation sidebar)
- #125399 (Stop using `to_hir_binop` in codegen)
r? `@ghost`
`@rustbot` modify labels: rollup
Force the inner coroutine of an async closure to `move` if the outer closure is `move` and `FnOnce`
See the detailed comment in `upvar.rs`.
Fixes#124867.
Fixes#124487.
r? oli-obk
An async closure may implement `FnMut`/`Fn` if it has no self-borrows
There's no reason that async closures may not implement `FnMut` or `Fn` if they don't actually borrow anything with the closure's env lifetime. Specifically, #123660 made it so that we don't always need to borrow captures from the closure's env.
See the doc comment on `should_reborrow_from_env_of_parent_coroutine_closure`:
c00957a3e2/compiler/rustc_hir_typeck/src/upvar.rs (L1777-L1823)
If there are no such borrows, then we are free to implement `FnMut` and `Fn` as permitted by our closure's inferred `ClosureKind`.
As far as I can tell, this change makes `async || {}` work in precisely the set of places they used to work before #120361.
Fixes#125247.
r? oli-obk
Disallow cast with trailing braced macro in let-else
This fixes an edge case I noticed while porting #118880 and #119062 to syn.
Previously, rustc incorrectly accepted code such as:
```rust
let foo = &std::ptr::null as &'static dyn std::ops::Fn() -> *const primitive! {
8
} else {
return;
};
```
even though a right curl brace `}` directly before `else` in a `let...else` statement is not supposed to be valid syntax.
Pattern types: Prohibit generic args on const params
Addresses https://github.com/rust-lang/rust/pull/123689/files#r1562676629.
NB: Technically speaking, *not* prohibiting generics args on const params is not a bug as `pattern_types` is an *internal* feature and as such any uncaught misuses of it are considered to be the fault of the user. However, permitting this makes me slightly uncomfortable esp. since we might want to make pattern types available to the public at some point and I don't want this oversight to be able to slip into the language (for comparison, ICEs triggered by the use of internal features are like super fine).
Furthermore, this is an ad hoc fix. A more general fix would be changing the representation of the pattern part of pattern types in such a way that it can reuse preexisting lowering routines for exprs / anon consts. See also this [Zulip discussion](https://rust-lang.zulipchat.com/#narrow/stream/131828-t-compiler/topic/pattern.20type.20HIR.20nodes/near/432410768) and #124650.
Also note that we currently don't properly typeck the pattern of pat tys. This however is out of scope for this PR.
cc ``@oli-obk``
r? ``@spastorino`` as discussed
offset: allow zero-byte offset on arbitrary pointers
As per prior `@rust-lang/opsem` [discussion](https://github.com/rust-lang/opsem-team/issues/10) and [FCP](https://github.com/rust-lang/unsafe-code-guidelines/issues/472#issuecomment-1793409130):
- Zero-sized reads and writes are allowed on all sufficiently aligned pointers, including the null pointer
- Inbounds-offset-by-zero is allowed on all pointers, including the null pointer
- `offset_from` on two pointers derived from the same allocation is always allowed when they have the same address
This removes surprising UB (in particular, even C++ allows "nullptr + 0", which we currently disallow), and it brings us one step closer to an important theoretical property for our semantics ("provenance monotonicity": if operations are valid on bytes without provenance, then adding provenance can't make them invalid).
The minimum LLVM we require (v17) includes https://reviews.llvm.org/D154051, so we can finally implement this.
The `offset_from` change is needed to maintain the equivalence with `offset`: if `let ptr2 = ptr1.offset(N)` is well-defined, then `ptr2.offset_from(ptr1)` should be well-defined and return N. Now consider the case where N is 0 and `ptr1` dangles: we want to still allow offset_from here.
I think we should change offset_from further, but that's a separate discussion.
Fixes https://github.com/rust-lang/rust/issues/65108
[Tracking issue](https://github.com/rust-lang/rust/issues/117945) | [T-lang summary](https://github.com/rust-lang/rust/pull/117329#issuecomment-1951981106)
Cc `@nikic`
Make sure that the method resolution matches in `note_source_of_type_mismatch_constraint`
`note_source_of_type_mismatch_constraint` is a pile of hacks that I implemented to cover up another pile of hacks.
It does a bunch of re-confirming methods, but it wasn't previously checking that the methods it was looking (back) up were equal to the methods we previously had. This PR adds those checks.
Fixes#118185
Move `#[do_not_recommend]` to the `#[diagnostic]` namespace
This commit moves the `#[do_not_recommend]` attribute to the `#[diagnostic]` namespace. It still requires
`#![feature(do_not_recommend)]` to work.
r? `@compiler-errors`
Fix incorrect suggestion for undeclared hrtb lifetimes in where clauses.
For poly-trait-ref like `for<'a> Trait<T>` in `T: for<'a> Trait<T> + 'b { }`.
We should merge the hrtb lifetimes: existed `for<'a>` and suggestion `for<'b>` or will get err: [E0316] nested quantification of lifetimes
fixes#122714
Relax restrictions on multiple sanitizers
Most combinations of LLVM sanitizers are legal-enough to enable simultaneously. This change will allow simultaneously enabling ASAN and shadow call stacks on supported platforms.
I used this python script to generate the mutually-exclusive sanitizer combinations:
```python
#!/usr/bin/python3
import subprocess
flags = [
["-fsanitize=address"],
["-fsanitize=leak"],
["-fsanitize=memory"],
["-fsanitize=thread"],
["-fsanitize=hwaddress"],
["-fsanitize=cfi", "-flto", "-fvisibility=hidden"],
["-fsanitize=memtag", "--target=aarch64-linux-android", "-march=armv8a+memtag"],
["-fsanitize=shadow-call-stack"],
["-fsanitize=kcfi", "-flto", "-fvisibility=hidden"],
["-fsanitize=kernel-address"],
["-fsanitize=safe-stack"],
["-fsanitize=dataflow"],
]
for i in range(len(flags)):
for j in range(i):
command = ["clang++"] + flags[i] + flags[j] + ["-o", "main.o", "-c", "main.cpp"]
completed = subprocess.run(command, stderr=subprocess.DEVNULL)
if completed.returncode != 0:
first = flags[i][0][11:].replace('-', '').upper()
second = flags[j][0][11:].replace('-', '').upper()
print(f"(SanitizerSet::{first}, SanitizerSet::{second}),")
```
Add `IntoIterator` for `Box<[T]>` + edition 2024-specific lints
* Adds a similar method probe opt-out mechanism to the `[T;N]: IntoIterator` implementation for edition 2021.
* Adjusts the relevant lints (shadowed `.into_iter()` calls, new source of method ambiguity).
* Adds some tests.
* Took the liberty to rework the logic in the `ARRAY_INTO_ITER` lint, since it was kind of confusing.
Based mostly off of #116607.
ACP: rust-lang/libs-team#263
References #59878
Tracking for Rust 2024: https://github.com/rust-lang/rust/issues/123759
Crater run was done here: https://github.com/rust-lang/rust/pull/116607#issuecomment-1770293013
Consensus afaict was that there is too much breakage, so let's do this in an edition-dependent way much like `[T; N]: IntoIterator`.
Follow-up fixes to `report_return_mismatched_types`
Some renames, simplifications, fixes, etc. Follow-ups to #123804. I don't think it totally disentangles this code, but it does remove some of the worst offenders on the "I am so confused" scale (e.g. `get_node_fn_decl`).
track cycle participants per root
The search graph may have multiple roots, e.g. in
```
A :- B
B :- A, C
C :- D
D :- C
```
we first encounter the `A -> B -> A` cycle which causes `A` to be a root. We then later encounter the `C -> D -> C` cycle as a nested goal of `B`. This cycle is completely separate and `C` will get moved to the global cache. This previously caused us to use `[B, D]` as the `cycle_participants` for `C` and `[]` for `A`.
split off from #125167 as I would like to merge this change separately and will rebase that PR on top of this one. There is no test for this issue and I don't quite know how to write one. It is probably worth it to generalize the search graph to enable us to write unit tests for it.
r? `@compiler-errors`
Note for E0599 if shadowed bindings has the method.
implement #123558
Use a visitor to find earlier shadowed bingings which has the method.
r? ``@estebank``
Remove libc from MSVC targets
``@ChrisDenton`` started working on a project to remove libc from Windows MSVC targets. I'm completing that work here.
The primary change is to cfg out the dependency in `library/`. And then there's a lot of test patching. Happy to separate this more if people want.
Update `unexpected_cfgs` lint for Cargo new `check-cfg` config
This PR updates the diagnostics output of the `unexpected_cfgs` lint for Cargo new `check-cfg` config.
It's a simple and cost-less alternative to the build-script `cargo::rustc-check-cfg` instruction.
```toml
[lints.rust]
unexpected_cfgs = { level = "warn", check-cfg = ['cfg(foo, values("bar"))'] }
```
This PR also adds a Cargo specific section regarding check-cfg and Cargo inside rustc's book (motivation is described inside the file, but mainly check-cfg is a rustc feature not a Cargo one, Cargo only enabled the feature, it does not own it; T-cargo even considers the `check-cfg` lint config to be an implementation detail).
This PR also updates the links to refer to that sub-page when using Cargo from rustc.
As well as updating the lint doc to refer to the check-cfg docs.
~**Not to be merged before https://github.com/rust-lang/cargo/pull/13913 reaches master!**~ (EDIT: merged in https://github.com/rust-lang/rust/pull/125237)
`@rustbot` label +F-check-cfg
r? `@fmease` *(feel free to roll)*
Fixes https://github.com/rust-lang/rust/issues/124800
cc `@epage` `@weihanglo`
coverage: Memoize and simplify counter expressions
When creating coverage counter expressions as part of coverage instrumentation, we often end up creating obviously-redundant expressions like `c1 + (c0 - c1)`, which is equivalent to just `c0`.
To avoid doing so, this PR checks when we would create an expression matching one of 5 patterns, and uses the simplified form instead:
- `(a - b) + b` → `a`.
- `(a + b) - b` → `a`.
- `(a + b) - a` → `b`.
- `a + (b - a)` → `b`.
- `a - (a - b)` → `b`.
Of all the different ways to combine 3 operands and 2 operators, these are the patterns that allow simplification.
(Some of those patterns currently don't occur in practice, but are included anyway for completeness, to avoid having to add them later as branch coverage and MC/DC coverage support expands.)
---
This PR also adds memoization for newly-created (or newly-simplified) counter expressions, to avoid creating duplicates.
This currently makes no difference to the final mappings, but is expected to be useful for MC/DC coverage of match expressions, as proposed by https://github.com/rust-lang/rust/pull/124278#issuecomment-2106754753.
Suggest setting lifetime in borrowck error involving types with elided lifetimes
```
error: lifetime may not live long enough
--> $DIR/ex3-both-anon-regions-both-are-structs-2.rs:7:5
|
LL | fn foo(mut x: Ref, y: Ref) {
| ----- - has type `Ref<'_, '1>`
| |
| has type `Ref<'_, '2>`
LL | x.b = y.b;
| ^^^^^^^^^ assignment requires that `'1` must outlive `'2`
|
help: consider introducing a named lifetime parameter
|
LL | fn foo<'a>(mut x: Ref<'a, 'a>, y: Ref<'a, 'a>) {
| ++++ ++++++++ ++++++++
```
As can be seen above, it currently doesn't try to compare the `ty::Ty` lifetimes that diverged vs the `hir::Ty` to correctly suggest the following
```
help: consider introducing a named lifetime parameter
|
LL | fn foo<'a>(mut x: Ref<'_, 'a>, y: Ref<'_, 'a>) {
| ++++ ++++++++ ++++++++
```
but I believe this to still be an improvement over the status quo.
Fix#40990.
Fix `tests/debuginfo/strings-and-strs`.
It fails on my machine because it embeds pointer addresses in the expected output.
This commit replaces the addresses with `0x[...]`.
r? ```@Mark-Simulacrum```
defrost `RUST_MIN_STACK=ice rustc hello.rs`
I didn't think too hard about testing my previous PR rust-lang/rust#122847 which makes our stack overflow handler assist people in discovering the `RUST_MIN_STACK` variable (which apparently is surprisingly useful for Really Big codebases). After it was merged, some useful comments left in a drive-by review led me to discover I had added an ICE. This reworks the code a bit to explain the rationale, remove the ICE that I introduced, and properly test one of the diagnostics.
fix suggestion in E0373 for !Unpin coroutines
Coroutines can be prefixed with the `static` keyword to make them
`!Unpin`.
However, given the following function:
```rust
fn check() -> impl Sized {
let x = 0;
#[coroutine]
static || {
yield;
x
}
}
```
We currently suggest prefixing `move` before `static`, which is
syntactically incorrect:
```
error[E0373]: coroutine may outlive the current function, but it borrows
...
--> src/main.rs:6:5
|
6 | static || {
| ^^^^^^^^^ may outlive borrowed value `x`
7 | yield;
8 | x
| - `x` is borrowed here
|
note: coroutine is returned here
--> src/main.rs:6:5
|
6 | / static || {
7 | | yield;
8 | | x
9 | | }
| |_____^
help: to force the coroutine to take ownership of `x` (and any other
referenced variables), use the `move` keyword
| // this is syntactically incorrect, it should be `static move ||`
6 | move static || {
| ++++
```
This PR suggests adding `move` after `static` for these coroutines.
I also added a UI test for this case.
Never type unsafe lint improvements
- Move linting code to a separate method
- Remove mentions of `core::convert::absurd` (#124311 was rejected)
- Make the lint into FCW
The last thing is a bit weird though. On one hand it should be `EditionSemanticsChange(2024)`, but on the other hand it shouldn't, because we also plan to break it on all editions some time later. _Also_, it's weird that we don't have `FutureReleaseSemanticsChangeReportInDeps`, IMO "this might cause UB in a future release" is important enough to be reported in deps...
IMO we ought to have three enums instead of [`FutureIncompatibilityReason`](https://doc.rust-lang.org/nightly/nightly-rustc/rustc_lint_defs/enum.FutureIncompatibilityReason.html#):
```rust
enum IncompatibilityWhen {
FutureRelease,
Edition(Edition),
}
enum IncompatibilyWhat {
Error,
SemanticChange,
}
enum IncompatibilityReportInDeps {
No,
Yes,
}
```
Tracking:
- https://github.com/rust-lang/rust/issues/123748
An earlier commit included the change for a suggestion here.
Unfortunately, it also used unwrap instead of dying properly.
Roll out the ~~rice paper~~ EarlyDiagCtxt before we do anything that
might leave a mess.
chore: Remove repeated words (extension of #124924)
When I saw #124924 I thought "Hey, I'm sure that there are far more than just two typos of this nature in the codebase". So here's some more typo-fixing.
Some found with regex, some found with a spellchecker. Every single one manually reviewed by me (along with hundreds of false negatives by the tools)
Actually use the `#[do_not_recommend]` attribute if present
This change tweaks the error message generation to actually use the `#[do_not_recommend]` attribute if present by just skipping the marked trait impl in favour of the parent impl. It also adds a compile test for this behaviour. Without this change the test would output the following error:
```
error[E0277]: the trait bound `&str: Expression` is not satisfied
--> /home/weiznich/Documents/rust/rust/tests/ui/diagnostic_namespace/do_not_recommend.rs:53:15
|
LL | SelectInt.check("bar");
| ^^^^^ the trait `Expression` is not implemented for `&str`, which is required by `&str: AsExpression<Integer>`
|
= help: the following other types implement trait `Expression`:
Bound<T>
SelectInt
note: required for `&str` to implement `AsExpression<Integer>`
--> /home/weiznich/Documents/rust/rust/tests/ui/diagnostic_namespace/do_not_recommend.rs:26:13
|
LL | impl<T, ST> AsExpression<ST> for T
| ^^^^^^^^^^^^^^^^ ^
LL | where
LL | T: Expression<SqlType = ST>,
| ------------------------ unsatisfied trait bound introduced here
```
Note how that mentions `&str: Expression` before and now mentions `&str: AsExpression<Integer>` instead which is much more helpful for users.
Open points for further changes before stabilization:
* We likely want to move the attribute to the `#[diagnostic]` namespace to relax the guarantees given?
* How does it interact with the new trait solver?
r? `@estebank`
This change tweaks the error message generation to actually use the
`#[do_not_recommend]` attribute if present by just skipping the marked
trait impl in favour of the parent impl. It also adds a compile test for
this behaviour. Without this change the test would output the following
error:
```
error[E0277]: the trait bound `&str: Expression` is not satisfied
--> /home/weiznich/Documents/rust/rust/tests/ui/diagnostic_namespace/do_not_recommend.rs:53:15
|
LL | SelectInt.check("bar");
| ^^^^^ the trait `Expression` is not implemented for `&str`, which is required by `&str: AsExpression<Integer>`
|
= help: the following other types implement trait `Expression`:
Bound<T>
SelectInt
note: required for `&str` to implement `AsExpression<Integer>`
--> /home/weiznich/Documents/rust/rust/tests/ui/diagnostic_namespace/do_not_recommend.rs:26:13
|
LL | impl<T, ST> AsExpression<ST> for T
| ^^^^^^^^^^^^^^^^ ^
LL | where
LL | T: Expression<SqlType = ST>,
| ------------------------ unsatisfied trait bound introduced here
```
Note how that mentions `&str: Expression` before and now mentions `&str:
AsExpression<Integer>` instead which is much more helpful for users.
Open points for further changes before stabilization:
* We likely want to move the attribute to the `#[diagnostic]` namespace
to relax the guarantees given?
* How does it interact with the new trait solver?
Add tests for `-Zunpretty=expanded` ported from stringify's tests
This PR adds a new set of tests for the AST pretty-printer.
Previously, pretty-printer edge cases were tested by way of `stringify!` in [tests/ui/macros/stringify.rs](https://github.com/rust-lang/rust/blob/1.78.0/tests/ui/macros/stringify.rs), such as the tests added by 419b26931b and 527e2eac17.
Those tests will no longer provide effective coverage of the AST pretty-printer after #124141. `Nonterminal` and `TokenKind::Interpolated` are being removed, and a consequence is that `stringify!` will perform token stream pretty printing, instead of AST pretty printing, in all of the `stringify!` cases including $:expr and all other interpolations.
This PR adds 2 new ui tests with `compile-flags: -Zunpretty=expanded`:
- **tests/ui/unpretty/expanded-exhaustive.rs** — this test aims for exhaustive coverage of all the variants of `ExprKind`, `ItemKind`, `PatKind`, `StmtKind`, `TyKind`, and `VisibilityKind`. Some parts could use being fleshed out further, but the current state is roughly on par with what exists in the old stringify-based tests.
- **tests/ui/unpretty/expanded-interpolation.rs** — this test covers tricky macro metavariable edge cases that require the AST pretty printer to synthesize parentheses in order for the printed code to be valid Rust syntax.
r? `@nnethercote`
Only make GAT ambiguous in `match_projection_projections` considering shallow resolvability
In #123537, I tweaked the hack from #93892 to use `resolve_vars_if_possible` instead of `shallow_resolve`. This considers more inference guidance ambiguous. This resulted in crater regressions in #125196.
I've effectively reverted the change to the old behavior. That being said, I don't *like* this behavior, but I'd rather keep it for now since #123537 was not meant to make any behavioral changes. See the attached example.
This also affects the new solver, for the record, which doesn't have any rules about not guiding inference from param-env candidates which may constrain GAT args as a side-effect.
r? `@lcnr` or `@jackh726`
Rename Unsafe to Safety
Alternative to #124455, which is to just have one Safety enum to use everywhere, this opens the posibility of adding `ast::Safety::Safe` that's useful for unsafe extern blocks.
This leaves us today with:
```rust
enum ast::Safety {
Unsafe(Span),
Default,
// Safe (going to be added for unsafe extern blocks)
}
enum hir::Safety {
Unsafe,
Safe,
}
```
We would convert from `ast::Safety::Default` into the right Safety level according the context.
Improve parser
Fixes#124935.
- Add a few more help diagnostics to incorrect semicolons
- Overall improved that function
- Addded a few comments
- Renamed diff_marker fns to git_diff_marker
Fix println! ICE when parsing percent prefix number
This PR fixes#125002 ICE occurring, for example, with `println!("%100000", 1)` or `println!("% 100000", 1)`.
## Test Case/Change Explanation
The return type of `Num::from_str` has been changed to `Option<Self>` to handle errors when parsing large integers fails.
1. The first `println!` in the test case covers the change of the first `Num::from_str` usage in `format_foreign.rs:426`.
2. The second `println!` in the test case covers the change of the second `Num::from_str` usage in line 460.
3. The 3rd to 5th `Num::from_str` usages behave the same as before.
The 3rd usage would cause an ICE when `num > u16::MAX` in the previous version, but this commit does not include a fix for the ICE in `println!("{:100000$}")`. I think we need to emit an error in the compiler and have more discussion in another issue/PR.
Migrate `run-make/issue64319` to `rmake` and rename
Part of #121876 and the associated [Google Summer of Code project](https://blog.rust-lang.org/2024/05/01/gsoc-2024-selected-projects.html).
~~I noticed that the Makefile was not listed in `allowed-run-makefiles` in Tidy. Does this mean the test was being ignored?~~ EDIT: No, it was there, just not in its expected alphabetical order.
EDIT2: Perhaps it could be interesting to clean this test visually by looping over the `rustc` calls, like in #125227.
Update `expr` matcher for Edition 2024 and add `expr_2021` nonterminal
This commit adds a new nonterminal `expr_2021` in macro patterns, and `expr_fragment_specifier_2024` feature flag.
This change also updates `expr` so that on Edition 2024 it will also match `const { ... }` blocks, while `expr_2021` preserves the current behavior of `expr`, matching expressions without `const` blocks.
Joint work with `@vincenzopalazzo.`
Issue #123742
Do not suggest constraining the `&self` param, but rather the return type.
If that is wrong (because it is not sufficient), a follow up error will tell the
user to fix it. This way we lower the chances of *over* constraining, but still
get the cake of "correctly" contrained in two steps.
This is a correct suggestion:
```
error: lifetime may not live long enough
--> $DIR/ex3-both-anon-regions-return-type-is-anon.rs:9:9
|
LL | fn foo<'a>(&self, x: &i32) -> &i32 {
| - - let's call the lifetime of this reference `'1`
| |
| let's call the lifetime of this reference `'2`
LL | x
| ^ method was supposed to return data with lifetime `'2` but it is returning data with lifetime `'1`
|
help: consider introducing a named lifetime parameter and update trait if needed
|
LL | fn foo<'a>(&self, x: &'a i32) -> &'a i32 {
| ++ ++
```
While this is incomplete because it should suggestino `&'a self`
```
error: lifetime may not live long enough
--> $DIR/ex3-both-anon-regions-self-is-anon.rs:7:19
|
LL | fn foo<'a>(&self, x: &Foo) -> &Foo {
| - - let's call the lifetime of this reference `'1`
| |
| let's call the lifetime of this reference `'2`
LL | if true { x } else { self }
| ^ method was supposed to return data with lifetime `'2` but it is returning data with lifetime `'1`
|
help: consider introducing a named lifetime parameter and update trait if needed
|
LL | fn foo<'a>(&self, x: &'a Foo) -> &'a Foo {
| ++ ++
```
but the follow up error is
```
error: lifetime may not live long enough
--> tests/ui/lifetimes/lifetime-errors/ex3-both-anon-regions-self-is-anon.rs:7:30
|
6 | fn foo<'a>(&self, x: &'a Foo) -> &'a Foo {
| -- - let's call the lifetime of this reference `'1`
| |
| lifetime `'a` defined here
7 | if true { x } else { self }
| ^^^^ method was supposed to return data with lifetime `'a` but it is returning data with lifetime `'1`
|
help: consider introducing a named lifetime parameter and update trait if needed
|
6 | fn foo<'a>(&'a self, x: &'a Foo) -> &'a Foo {
| ++
```
```
error: lifetime may not live long enough
--> $DIR/lt-ref-self.rs:12:9
|
LL | fn ref_self(&self, f: &u32) -> &u32 {
| - - let's call the lifetime of this reference `'1`
| |
| let's call the lifetime of this reference `'2`
LL | f
| ^ method was supposed to return data with lifetime `'2` but it is returning data with lifetime `'1`
|
help: consider introducing a named lifetime parameter and update trait if needed
|
LL | fn ref_self<'b>(&'b self, f: &'b u32) -> &'b u32 {
| ++++ ++ ++ ++
```
```
error: lifetime may not live long enough
--> f205.rs:8:16
|
7 | fn resolve_symbolic_reference(&self, reference: Option<Reference>) -> Option<Reference> {
| - --------- has type `Option<Reference<'1>>`
| |
| let's call the lifetime of this reference `'2`
8 | return reference;
| ^^^^^^^^^ method was supposed to return data with lifetime `'2` but it is returning data with lifetime `'1`
|
help: consider introducing a named lifetime parameter
|
7 | fn resolve_symbolic_reference<'a>(&'a self, reference: Option<Reference<'a>>) -> Option<Reference<'a>> {
| ++++ ++ ++++ ++++
```
The correct suggestion would be
```
help: consider introducing a named lifetime parameter
|
7 | fn resolve_symbolic_reference<'a>(&self, reference: Option<Reference<'a>>) -> Option<Reference<'a>> {
| ++++ ++++ ++++
```
but we are not doing the analysis to detect that yet. If we constrain `&'a self`, then the return type with a borrow will implicitly take its lifetime from `'a`, it is better to make it explicit in the suggestion, in case that `&self` *doesn't* need to be `'a`, but the return does.
```
error: lifetime may not live long enough
--> $DIR/ex3-both-anon-regions-both-are-structs-2.rs:7:5
|
LL | fn foo(mut x: Ref, y: Ref) {
| ----- - has type `Ref<'_, '1>`
| |
| has type `Ref<'_, '2>`
LL | x.b = y.b;
| ^^^^^^^^^ assignment requires that `'1` must outlive `'2`
|
help: consider introducing a named lifetime parameter
|
LL | fn foo<'a>(mut x: Ref<'a, 'a>, y: Ref<'a, 'a>) {
| ++++ ++++++++ ++++++++
```
As can be seen above, it currently doesn't try to compare the `ty::Ty` lifetimes that diverged vs the `hir::Ty` to correctly suggest the following
```
help: consider introducing a named lifetime parameter
|
LL | fn foo<'a>(mut x: Ref<'_, 'a>, y: Ref<'_, 'a>) {
| ++++ ++++++++ ++++++++
```
but I believe this to still be an improvement over the status quo.
CC #40990.
expand: fix minor diagnostics bug
The error mentions `///`, when it's actually `//!`:
```
error[E0658]: attributes on expressions are experimental
--> test.rs:4:9
|
4 | //! wah
| ^^^^^^^
|
= note: see issue https://github.com/rust-lang/rust/issues/15701 <https://github.com/rust-lang/rust/issues/15701> for more information
= help: add `#![feature(stmt_expr_attributes)]` to the crate attributes to enable
= help: `///` is for documentation comments. For a plain comment, use `//`.
```
Enable `rust-lld` on nightly `x86_64-unknown-linux-gnu`
We believe we have done virtually all the internal work and tests we could to prepare for using `lld` as the default linker (at least on Linux). We're IMHO at a point where we'd need to expand testing and coverage in order to make progress on this effort.
Therefore, for further testing and gathering real-world feedback, unexpected issues and use-cases, this PR enables `rust-lld` as the default linker:
- on nightly only (and dev channel)
- on `x86_64-unknown-linux-gnu` only
- when not using an external LLVM (except `download-ci-llvm`), so that distros are not impacted
as described in more detail in this [zulip thread](https://rust-lang.zulipchat.com/#narrow/stream/131828-t-compiler/topic/Enabling.20.60rust-lld.60.20on.20nightly.20.60x86_64-unknown-linux-gnu.60/near/433709343).
In case any issues happen to users, as e.g. lld is not bug-for-bug compatible with GNU ld, it's easy to disable with `-Zlinker-features=-lld` to revert to using the system's default linker.
---
I don't know who should review this kind of things, as it's somewhat of a crosscutting effort. Compiler contributor, compiler performance WG and infra member sounds perfect, so r? `@Mark-Simulacrum.`
The last crater run encountered a low number (44) of mainly avoidable issues, like small incompatibilities, user errors, and a difference between the two linkers about which default to use with `--gc-sections`. [Here's the triage report](https://hackmd.io/OAJxlxc6Te6YUot9ftYSKQ?view), categorizing the issues, with some analyses and workarounds. I'd appreciate another set of eyes looking at these results.
The changes in this PR have been test-driven for CI changes, try builds with tests enabled, rustc-perf with bootstrapping, in PR #113382.
For infra, about the CI change: this PR forces `rust.lld` to false on vanilla LLVM builders, just to make sure we have coverage without `rust-lld`. Though to be clear, just using an external LLVM is already enough to keep `rust.lld` to false, in turn reverting everything to using the system's default linker.
cc `@rust-lang/bootstrap` for the bootstrap and config change
cc `@petrochenkov` for the small compiler change
cc `@rust-lang/wg-compiler-performance`
The blog post announcing the change, that we expect to merge around the same time as we merge this PR, is open [on the blog repo](https://github.com/rust-lang/blog.rust-lang.org/pull/1319).
Bootstrap change history: this PR changes the default of a config option on `x86_64-unknown-linux-gnu`. It's, however, not expected to cause issues, or require any changes to existing configurations. It's a big enough change that people should at least know about it, in case it causes unexpected problems. If that happens, set `rust.lld = false` in your `config.toml` (and open an issue).
Fix assertion when attempting to convert `f16` and `f128` with `as`
These types are currently rejected for `as` casts by the compiler. Remove this incorrect check and add codegen tests for all conversions involving these types.
These types are currently rejected for `as` casts by the compiler.
Remove this incorrect check and add codegen tests for all conversions
involving these types.
Rename `${length()}` to `${len()}`
Implements the rename suggested in https://github.com/rust-lang/rust/pull/122808#issuecomment-2047722187
> I brought this up in the doc PR but it belongs here – `length` should probably be renamed `len` before stabilization. The latter is de facto standard in the standard library, whereas the former is only used in a single unstable API. These metafunctions aren’t library items of course, but should presumably still be consistent with established names.
r? `@c410-f3r`
rustdoc: Negative impls are not notable
In #124097, we add `impl !Iterator for [T]` for coherence reasons, and since `Iterator` is a [notable trait](8387315ab3/library/core/src/iter/traits/iterator.rs (L40)), this means that all `-> &[_]` now are tagged with a `!Iterator` impl as a notable trait.
I "fixed" the failing tests in that PR with 6cbbb8b709a43482847243484ed67131e372ba71, where I just blessed the tests, since I didn't want to mix these changes with that PR; however, don't believe negative impls are notable, and this PR aims to prevent these impls from being mentioned.
In the standard library, we use negative impls purely to guide coherence. They're not really a signal of anything useful to the end-user. If there ever is a case that we want negative impls to be mentioned as notable, this really should be an opt-in feature.
Migrate `run-make/no-cdylib-as-rdylib` to `rmake`
Part of #121876 and the associated [Google Summer of Code project](https://blog.rust-lang.org/2024/05/01/gsoc-2024-selected-projects.html).
> "the test will fail if the cdylib is picked, because it doesn't export any rust symbols"
Is that true? Is there a way to verify?
I suggest maybe extending the test with: (after cleaning the directory)
```rust
rustc()
.input("bar.rs")
.crate_type("cdylib")
.run();
rustc()
.input("foo.rs")
.prefer_dynamic()
.run();
fail();
```
to make sure we're actually testing something here.
Fix the dedup error because of spans from suggestion
Fixes#116502
I believe this kind of issue is supposed resolved by #118057, but the `==` in `span` respect syntax context, here we should only care that they point to the same bytes of source text, so should use `source_equal`.
Migrate `run-make/issue-11908` to new `rmake.rs` format
Part of #121876 and the associated [Google Summer of Code project](https://blog.rust-lang.org/2024/05/01/gsoc-2024-selected-projects.html).
Set as draft, because I have a few concerns:
- [x] I am not sure if `target().contains("darwin")` is a good way of checking that the target is on OSX.
- [x] I find it strange that the `dylib` part of the test adapts to different target platforms, but not the `rlib` part. Is `rlib` named the same on all platforms?
Rollup of 7 pull requests
Successful merges:
- #119838 (style-guide: When breaking binops handle multi-line first operand better)
- #124844 (Use a proper probe for shadowing impl)
- #125047 (Migrate `run-make/issue-14500` to new `rmake.rs` format)
- #125080 (only find segs chain for missing methods when no available candidates)
- #125088 (Uplift `AliasTy` and `AliasTerm`)
- #125100 (Don't do post-method-probe error reporting steps if we're in a suggestion)
- #125118 (Use new utility functions/methods in run-make tests)
r? `@ghost`
`@rustbot` modify labels: rollup
Use new utility functions/methods in run-make tests
Little cleanup using new functions/methods I added into the `run-make-support` library.
r? `@jieyouxu`
Don't do post-method-probe error reporting steps if we're in a suggestion
Currently in method probing, if we fail to pick a method, then we reset and try to collect relevant candidates for method errors:
34582118af/compiler/rustc_hir_typeck/src/method/probe.rs (L953-L993)
However, we do method lookups via `lookup_method_for_diagnostic` and only care about the result if the method probe was a *success*.
Namely, we don't need to do a bunch of other lookups on failure, since we throw away these results anyways, such as an expensive call to:
34582118af/compiler/rustc_hir_typeck/src/method/probe.rs (L959)
And:
34582118af/compiler/rustc_hir_typeck/src/method/probe.rs (L985)
---
This PR also renames some methods so it's clear that they're for diagnostics.
r? `@nnethercote`
only find segs chain for missing methods when no available candidates
Fixes#124946
This PR includes two changes:
- Extracting the lookup for the missing method in chains into a single function.
- Calling this function only when there are no candidates available.
Migrate `run-make/issue-14500` to new `rmake.rs` format
Part of #121876 and the associated [Google Summer of Code project](https://blog.rust-lang.org/2024/05/01/gsoc-2024-selected-projects.html).
Note: I find suspicious that `libbar.a` is hardcoded and is not using the `STATICLIB` call to adapt to Windows platforms. Is this intentional? If not, this will need to be changed.
Add x86_64-unknown-linux-none target
Adds a freestanding linux binary with no libc dependency. This is useful for writing programs written only in rust. It is also essential for writing low level stuff like libc or a dynamic linker.
Tier 3 policy:
>A tier 3 target must have a designated developer or developers (the "target maintainers") on record to be CCed when issues arise regarding the target. (The mechanism to track and CC such developers may evolve over time.)
I will be the designed maintainer for this target
>Targets must use naming consistent with any existing targets; for instance, a target for the same CPU or OS as an existing Rust target should use the same name for that CPU or OS. Targets should normally use the same names and naming conventions as used elsewhere in the broader ecosystem beyond Rust (such as in other toolchains), unless they have a very good reason to diverge. Changing the name of a target can be highly disruptive, especially once the target reaches a higher tier, so getting the name right is important even for a tier 3 target.
The target triple is consistent with other targets
>Target names should not introduce undue confusion or ambiguity unless absolutely necessary to maintain ecosystem compatibility. For example, if the name of the target makes people extremely likely to form incorrect beliefs about what it targets, the name should be changed or augmented to disambiguate it.
If possible, use only letters, numbers, dashes and underscores for the name. Periods (.) are known to cause issues in Cargo.
There is no confusion with other targets since it explicitly adds "none" at the end instead of omitting the environment
>Tier 3 targets may have unusual requirements to build or use, but must not create legal issues or impose onerous legal terms for the Rust project or for Rust developers or users.
The target does not introduce any unusual requirement
>The target must not introduce license incompatibilities.
There are no license incompatibilities
> Anything added to the Rust repository must be under the standard Rust license (MIT OR Apache-2.0).
Everything added is under that license
>The target must not cause the Rust tools or libraries built for any other host (even when supporting cross-compilation to the target) to depend on any new dependency less permissive than the Rust licensing policy. This applies whether the dependency is a Rust crate that would require adding new license exceptions (as specified by the tidy tool in the rust-lang/rust repository), or whether the dependency is a native library or binary. In other words, the introduction of the target must not cause a user installing or running a version of Rust or the Rust tools to be subject to any new license requirements.
There are no new dependencies
>Compiling, linking, and emitting functional binaries, libraries, or other code for the target (whether hosted on the target itself or cross-compiling from another target) must not depend on proprietary (non-FOSS) libraries. Host tools built for the target itself may depend on the ordinary runtime libraries supplied by the platform and commonly used by other applications built for the target, but those libraries must not be required for code generation for the target; cross-compilation to the target must not require such libraries at all. For instance, rustc built for the target may depend on a common proprietary C runtime library or console output library, but must not depend on a proprietary code generation library or code optimization library. Rust's license permits such combinations, but the Rust project has no interest in maintaining such combinations within the scope of Rust itself, even at tier 3.
There is no proprietary dependencies
>"onerous" here is an intentionally subjective term. At a minimum, "onerous" legal/licensing terms include but are not limited to: non-disclosure requirements, non-compete requirements, contributor license agreements (CLAs) or equivalent, "non-commercial"/"research-only"/etc terms, requirements conditional on the employer or employment of any particular Rust developers, revocable terms, any requirements that create liability for the Rust project or its developers or users, or any requirements that adversely affect the livelihood or prospects of the Rust project or its developers or users.
No such terms exist for this target
>Neither this policy nor any decisions made regarding targets shall create any binding agreement or estoppel by any party. If any member of an approving Rust team serves as one of the maintainers of a target, or has any legal or employment requirement (explicit or implicit) that might affect their decisions regarding a target, they must recuse themselves from any approval decisions regarding the target's tier status, though they may otherwise participate in discussions.
>This requirement does not prevent part or all of this policy from being cited in an explicit contract or work agreement (e.g. to implement or maintain support for a target). This requirement exists to ensure that a developer or team responsible for reviewing and approving a target does not face any legal threats or obligations that would prevent them from freely exercising their judgment in such approval, even if such judgment involves subjective matters or goes beyond the letter of these requirements.
Understood
>Tier 3 targets should attempt to implement as much of the standard libraries as possible and appropriate (core for most targets, alloc for targets that can support dynamic memory allocation, std for targets with an operating system or equivalent layer of system-provided functionality), but may leave some code unimplemented (either unavailable or stubbed out as appropriate), whether because the target makes it impossible to implement or challenging to implement. The authors of pull requests are not obligated to avoid calling any portions of the standard library on the basis of a tier 3 target not implementing those portions.
The target already implements core. It might be possible in the future to add support for alloc and std by leveraging crates such as [origin](https://github.com/sunfishcode/origin/) and [rustix](https://github.com/bytecodealliance/rustix)
> The target must provide documentation for the Rust community explaining how to build for the target, using cross-compilation if possible. If the target supports running binaries, or running tests (even if they do not pass), the documentation must explain how to run such binaries or tests for the target, using emulation if possible or dedicated hardware if necessary.
I believe the proper docs are added
>Tier 3 targets must not impose burden on the authors of pull requests, or other developers in the community, to maintain the target. In particular, do not post comments (automated or manual) on a PR that derail or suggest a block on the PR based on a tier 3 target. Do not send automated messages or notifications (via any medium, including via `@)` to a PR author or others involved with a PR regarding a tier 3 target, unless they have opted into such messages.
> Backlinks such as those generated by the issue/PR tracker when linking to an issue or PR are not considered a violation of this policy, within reason. However, such messages (even on a separate repository) must not generate notifications to anyone involved with a PR who has not requested such notifications.
Understood
> Patches adding or updating tier 3 targets must not break any existing tier 2 or tier 1 target, and must not knowingly break another tier 3 target without approval of either the compiler team or the maintainers of the other tier 3 target.
> In particular, this may come up when working on closely related targets, such as variations of the same architecture with different features. Avoid introducing unconditional uses of features that another variation of the target may not have; use conditional compilation or runtime detection, as appropriate, to let each target run code supported by that target.
No other targets are effected
>Tier 3 targets must be able to produce assembly using at least one of rustc's supported backends from any host target.
The same backends used by other linux targets work without issues
Warn against changes in opaque lifetime captures in 2024
Adds a (mostly[^1]) machine-applicable lint `IMPL_TRAIT_OVERCAPTURES` which detects cases where we will capture more lifetimes in edition 2024 than in edition <= 2021, which may lead to erroneous borrowck errors.
This lint is gated behind the `precise_capturing` feature gate and marked `Allow` for now.
[^1]: Except when there are APITs -- I may work on that soon
r? oli-obk
Some of these cases currently don't occur in practice, but are included for
completeness, and to avoid having to add them later as branch coverage and
MC/DC coverage start building more complex expressions.
Rollup of 4 pull requests
Successful merges:
- #116675 ([ptr] Document maximum allocation size)
- #124997 (Fix ICE while casting a type with error)
- #125072 (Add test for dynamic dispatch + Pin::new soundness)
- #125090 (Migrate fuchsia docs from `pm` to `ffx`)
r? `@ghost`
`@rustbot` modify labels: rollup
Remove `NtIdent` and `NtLifetime`
This is one part of the bigger "remove `Nonterminal` and `TokenKind::Interpolated`" change drafted in #114647. More details in the individual commit messages.
r? `@petrochenkov`
Split out `ty::AliasTerm` from `ty::AliasTy`
Splitting out `AliasTerm` (for use in project and normalizes goals) and `AliasTy` (for use in `ty::Alias`)
r? lcnr
This commit adds a new nonterminal `expr_2021` in macro patterns, and
`expr_fragment_specifier_2024` feature flag. For now, `expr` and
`expr_2021` are treated the same, but in future PRs we will update
`expr` to match to new grammar.
Co-authored-by: Vincezo Palazzo <vincenzopalazzodev@gmail.com>
Many, many projects use `size_of` to get the size of a type. However,
it's also often equally easy to hardcode a size (e.g. `8` instead of
`size_of::<u64>()`). Minimizing friction in the use of `size_of` helps
ensure that people use it and make code more self-documenting.
The name `size_of` is unambiguous: the name alone, without any prefix or
path, is self-explanatory and unmistakeable for any other functionality.
Adding it to the prelude cannot produce any name conflicts, as any local
definition will silently shadow the one from the prelude. Thus, we don't
need to wait for a new edition prelude to add it.
Add `size_of_val`, `align_of`, and `align_of_val` as well, with similar
justification: widely useful, self-explanatory, unmistakeable for
anything else, won't produce conflicts.
Rewrite 3 very similar `run-make` alloc tests to rmake
Part of #121876#121918 attempted to port these 3 tests 2 months ago. However, since then, the structure of `run-make-support` has changed a bit and new helper functions were added. Since there has been no activity on the PR, they are good low-hanging fruit to knock down, using the new functions of the current library.
There is also the removal of a useless import on a very similar test.
Unify `Rvalue::Aggregate` paths in cg_ssa
In #123840 and #123886 I added two different codepaths for `Rvalue::Aggregate` in `cg_ssa`.
This merges them into one, since raw pointers are also immediates that can be built from the immediates of their "fields".
This span records the declaration of the metavariable in the LHS of the macro.
It's used in a couple of error messages. Unfortunately, it gets in the way of
the long-term goal of removing `TokenKind::Interpolated`. So this commit
removes it, which degrades a couple of (obscure) error messages but makes
things simpler and enables the next commit.
Pretty-print let-else with added parenthesization when needed
Rustc used to produce invalid syntax for the following code, which is problematic because it means we cannot apply rustfmt to the output of `-Zunpretty=expanded`.
```rust
macro_rules! expr {
($e:expr) => { $e };
}
fn main() {
let _ = expr!(loop {}) else { return; };
}
```
```console
$ rustc repro.rs -Zunpretty=expanded | rustfmt
error: `loop...else` loops are not supported
--> <stdin>:9:29
|
9 | fn main() { let _ = loop {} else { return; }; }
| ---- ^^^^^^^^^^^^^^^^
| |
| `else` is attached to this loop
|
= note: consider moving this `else` clause to a separate `if` statement and use a `bool` variable to control if it should run
```
Unfortunately, we can't always offer a machine-applicable suggestion when there are subpatterns from macro expansion.
Co-Authored-By: Guillaume Boisseau <Nadrieril@users.noreply.github.com>
Fix some minor issues from the ui-test auto-porting
I'm not sure if these count as false positives, because well, starting a comment with `// incremental` was probably a valid compiletest directive.
But anyway, these tests directives became clearly goofy and now with the better syntax we can straighten things out.
r? jieyouxu
Migrate rustdoc scrape examples ordering
Part of https://github.com/rust-lang/rust/issues/121876.
This one adds a lot of utility methods/functions. To prevent having too much changes at once, I didn't make the existing rmake tests use these yet but I'll send a follow-up so they all use it.
r? `@jieyouxu`
Fix, document, and test parser and pretty-printer edge cases related to braced macro calls
_Review note: this is a deceptively small PR because it comes with 145 lines of docs and 196 lines of tests, and only 25 lines of compiler code changed. However, I recommend reviewing it 1 commit at a time because much of the effect of the code changes is non-local i.e. affecting code that is not visible in the final state of the PR. I have paid attention that reviewing the PR one commit at a time is as easy as I can make it. All of the code you need to know about is touched in those commits, even if some of those changes disappear by the end of the stack._
This is a follow-up to https://github.com/rust-lang/rust/pull/119105. One case that is not relevant to `-Zunpretty=expanded`, but which came up as I'm porting #119105 and #118726 into `syn`'s printer and `prettyplease`'s printer where it **is** relevant, and is also relevant to rustc's `stringify!`, is statement boundaries in the vicinity of braced macro calls.
Rustc's AST pretty-printer produces invalid syntax for statements that begin with a braced macro call:
```rust
macro_rules! stringify_item {
($i:item) => {
stringify!($i)
};
}
macro_rules! repro {
($e:expr) => {
stringify_item!(fn main() { $e + 1; })
};
}
fn main() {
println!("{}", repro!(m! {}));
}
```
**Before this PR:** output is not valid Rust syntax.
```console
fn main() { m! {} + 1; }
```
```console
error: leading `+` is not supported
--> <anon>:1:19
|
1 | fn main() { m! {} + 1; }
| ^ unexpected `+`
|
help: try removing the `+`
|
1 - fn main() { m! {} + 1; }
1 + fn main() { m! {} 1; }
|
```
**After this PR:** valid syntax.
```console
fn main() { (m! {}) + 1; }
```
The change to the test is a little goofy because the compiler was
guessing "correctly" before that `falsy! {}` is the condition as opposed
to the else body. But I believe this change is fundamentally correct.
Braced macro invocations in statement position are most often item-like
(`thread_local! {...}`) as opposed to parenthesized macro invocations
which are condition-like (`cfg!(...)`).
Always hide private fields in aliased type
This PR adds a new rustdoc pass that unconditionally always strips all private fields in aliased type, since showing them, even with `--document-private-items`, is confusing, unhelpful, and run backwards to the "Aliased type" feature, which is to show the type as it would be seen by the user.
r? ```@GuillaumeGomez```
Fixes#124938Fixes#123860
Clean up users of rust_dbg_call
`rust_dbg_call` is a C test helper that until this PR was declared in C with `void*` arguments and used in Rust _mostly_ with `libc::uintptr_t` arguments. Nearly every user just wants to pass integers around, so I've changed all users to `uint64_t` or `u64`.
The single test that actually used the pointer-ness of the argument is a test for ensuring that Rust can make extern calls outside of tasks. Rust hasn't had tasks for quite a few years now, so I'm deleting that test under the same logic as the test deleted in https://github.com/rust-lang/rust/pull/124073
Make sure we consume a generic arg when checking mistyped turbofish
When recovering un-turbofish-ed args in expr position (e.g. `let x = a<T, U>();` in `check_mistyped_turbofish_with_multiple_type_params`, we used `parse_seq_to_before_end` to parse the fake generic args; however, it used `parse_generic_arg` which *optionally* parses a generic arg. If it doesn't end up parsing an arg, it returns `Ok(None)` and consumes no tokens. If we don't find a delimiter after this (`,`), we try parsing *another* element. In this case, we just infinitely loop looking for a subsequent element.
We can fix this by making sure that we either parse a generic arg or error in `parse_seq_to_before_end`'s callback.
Fixes#124897
ignore generics args in attribute paths
Fixes#97006Fixes#123911Fixes#123912
This patch ensures that we no longer have to handle invalid generic arguments in attribute paths.
r? `@petrochenkov`
Avoid `alloca`s in codegen for simple `mir::Aggregate` statements
The core idea here is to remove the abstraction penalty of simple newtypes in codegen.
Even something simple like constructing a
```rust
#[repr(transparent)] struct Foo(u32);
```
forces an `alloca` to be generated in nightly right now.
Certainly LLVM can optimize that away, but it would be nice if it didn't have to.
Quick example:
```rust
#[repr(transparent)]
pub struct Transparent32(u32);
#[no_mangle]
pub fn make_transparent(x: u32) -> Transparent32 {
let a = Transparent32(x);
a
}
```
on nightly we produce <https://rust.godbolt.org/z/zcvoM79ae>
```llvm
define noundef i32 `@make_transparent(i32` noundef %x) unnamed_addr #0 {
%a = alloca i32, align 4
store i32 %x, ptr %a, align 4
%0 = load i32, ptr %a, align 4, !noundef !3
ret i32 %0
}
```
but after this PR we produce
```llvm
define noundef i32 `@make_transparent(i32` noundef %x) unnamed_addr #0 {
start:
ret i32 %x
}
```
(even before the optimizer runs).
Refactor float `Primitive`s to a separate `Float` type
Now there are 4 of them, it makes sense to refactor `F16`, `F32`, `F64` and `F128` out of `Primitive` and into a separate `Float` type (like integers already are). This allows patterns like `F16 | F32 | F64 | F128` to be simplified into `Float(_)`, and is consistent with `ty::FloatTy`.
As a side effect, this PR also makes the `Ty::primitive_size` method work with `f16` and `f128`.
Tracking issue: #116909
`@rustbot` label +F-f16_and_f128
Fix parse error message for meta items
Addresses https://github.com/rust-lang/rust/issues/122796#issuecomment-2010803906, cc [``@]Thomasdezeeuw.``
For attrs inside of a macro like `#[doc(alias = $ident)]` or `#[cfg(feature = $ident)]` where `$ident` is a macro metavariable of fragment kind `ident`, we used to say the following when expanded (with `$ident` ⟼ `ident`):
```
error: expected unsuffixed literal or identifier, found `ident`
--> weird.rs:6:19
|
6 | #[cfg(feature = $ident)]
| ^^^^^^
...
11 | m!(id);
| ------ in this macro invocation
|
= note: this error originates in the macro `m` (in Nightly builds, run with -Z macro-backtrace for more info)
```
This was incorrect and caused confusion, justifiably so (see #122796).
In this position, we only accept/expect *unsuffixed literals* which consist of numeric & string literals as well as the boolean literals / the keywords / the reserved identifiers `false` & `true` **but not** arbitrary identifiers.
Furthermore, we used to suggest garbage when encountering unexpected non-identifier tokens:
```
error: expected unsuffixed literal, found `-`
--> weird.rs:16:17
|
16 | #[cfg(feature = -1)]
| ^
|
help: surround the identifier with quotation marks to parse it as a string
|
16 | #[cfg(feature =" "-1)]
| + +
```
Now we no longer do.
Display walltime benchmarks with subnanosecond precision
With modern CPUs running at more than one cycle per nanosecond the current precision is insufficient to resolve differences worth several cycles per iteration.
Granted, walltime benchmarks often are noisy but occasionally, especially when no allocations are involved, the difference really is just a few cycles.
example results when benchmarking 1-4 serialized ADD instructions and an empty bench body
```
running 4 tests
test add ... bench: 0.24 ns/iter (+/- 0.00)
test add2 ... bench: 0.48 ns/iter (+/- 0.01)
test add3 ... bench: 0.72 ns/iter (+/- 0.01)
test add4 ... bench: 0.96 ns/iter (+/- 0.01)
test empty ... bench: 0.24 ns/iter (+/- 0.00)
```
Some minor (English only) heroics are performed to print error messages
like "5th rule of macro `m` is never used". The form "rule #5 of macro
`m` is never used" is just as good and much simpler to implement.
Document tests in the `run-make` directory (A to C)
Part of the #121876 project.
This PR adds comments to some `run-make` tests which lack one, explaining _what_ is being tested. If possible, a link to the relevant PR or Issue responsible for the test is also provided.
This will help the porting efforts to `rmake.rs`, and will also allow maintainers to focus efforts on tests which are more pertinent to port. For example, [this test](https://github.com/rust-lang/rust/blob/master/tests/run-make/cat-and-grep-sanity-check/Makefile) will become useless after all tests containing `CGREP` are successfully ported.
In order to simplify review and at the suggestion of Kobzol on the rust-lang #gsoc Zulip, only the first 23 comments are part of this PR. If it is merged, future PRs will ensue commenting the rest of the tests.
Could be an UI test:
- `dep-info-doesnt-run-much`
Add `ErrorGuaranteed` to `Recovered::Yes` and use it more.
The starting point for this was identical comments on two different fields, in `ast::VariantData::Struct` and `hir::VariantData::Struct`:
```
// FIXME: investigate making this a `Option<ErrorGuaranteed>`
recovered: bool
```
I tried that, and then found that I needed to add an `ErrorGuaranteed` to `Recovered::Yes`. Then I ended up using `Recovered` instead of `Option<ErrorGuaranteed>` for these two places and elsewhere, which required moving `ErrorGuaranteed` from `rustc_parse` to `rustc_ast`.
This makes things more consistent, because `Recovered` is used in more places, and there are fewer uses of `bool` and
`Option<ErrorGuaranteed>`. And safer, because it's difficult/impossible to set `recovered` to `Recovered::Yes` without having emitted an error.
r? `@oli-obk`
Tidy check for test revisions that are mentioned but not declared
If a `[revision]` name appears in a test header directive or error annotation, but isn't declared in the `//@ revisions:` header, that is almost always a mistake.
In cases where a revision needs to be temporarily disabled, adding it to an `//@ unused-revision-names:` header will suppress these checks for that name.
Adding the wildcard name `*` to the unused list will suppress these checks for the entire file.
(None of the tests actually use `*`; it's just there because it was easy to add and could be handy as an escape hatch when dealing with other problems.)
---
Most of the existing problems discovered by this check were fairly straightforward to fix (or ignore); the trickiest cases are in `borrowck` tests.
