Make `Step` trait safe to implement
This PR makes a few modifications to the `Step` trait that I believe better position it for stabilization in the short term. In particular,
1. `unsafe trait TrustedStep` is introduced, indicating that the implementation of `Step` for a given type upholds all stated invariants (which have remained unchanged). This is gated behind a new `trusted_step` feature, as stabilization is realistically blocked on min_specialization.
2. The `Step` trait is internally specialized on the `TrustedStep` trait, which avoids a serious performance regression.
3. `TrustedLen` is implemented for `T: TrustedStep` as the latter's invariants subsume the former's.
4. The `Step` trait is no longer `unsafe`, as the invariants must not be relied upon by unsafe code (unless the type implements `TrustedStep`).
5. `TrustedStep` is implemented for all types that implement `Step` in the standard library and compiler.
6. The `step_trait_ext` feature is merged into the `step_trait` feature. I was unable to find any reasoning for the features being split; the `_unchecked` methods need not necessarily be stabilized at the same time, but I think it is useful to have them under the same feature flag.
All existing implementations of `Step` will be broken, as it is not possible to `unsafe impl` a safe trait. Given this trait only exists on nightly, I feel this breakage is acceptable. The blanket `impl<T: Step> TrustedLen for T` will likely cause some minor breakage, but this should be covered by the equivalent impl for `TrustedStep`.
Hopefully these changes are sufficient to place `Step` in decent position for stabilization, which would allow user-defined types to be used with `a..b` syntax.
const-eval: disallow unwinding across functions that `!fn_can_unwind()`
Following https://github.com/rust-lang/miri/pull/1776#discussion_r633074343, so r? `@RalfJung`
This PR turns `unwind` in `StackPopCleanup::Goto` into a new enum `StackPopUnwind`, with a `NotAllowed` variant to indicate that unwinding is not allowed. This variant is chosen based on `rustc_middle::ty::layout::fn_can_unwind()` in `eval_fn_call()` when pushing the frame. A check is added in `unwind_to_block()` to report UB if unwinding happens across a `StackPopUnwind::NotAllowed` frame.
Tested with Miri `HEAD` with [minor changes](https://github.com/rust-lang/miri/compare/HEAD..9cf3c7f0d86325a586fbcbf2acdc9232b861f1d8) and the rust-lang/miri#1776 branch with [these changes](d866c1c52f..626638fbfe).
Post-monomorphization errors traces MVP
This PR works towards better diagnostics for the errors encountered in #85155 and similar.
We can encounter post-monomorphization errors (PMEs) when collecting mono items. The current diagnostics are confusing for these cases when they happen in a dependency (but are acceptable when they happen in the local crate).
These kinds of errors will be more likely now that `stdarch` uses const generics for its intrinsics' immediate arguments, and validates these const arguments with a mechanism that triggers such PMEs.
(Not to mention that the errors happen during codegen, so only when building code that actually uses these code paths. Check builds don't trigger them, neither does unused code)
So in this PR, we detect these kinds of errors during the mono item graph walk: if any error happens while collecting a node or its neighbors, we print a diagnostic about the current collection step, so that the user has at least some context of which erroneous code and dependency triggered the error.
The diagnostics for issue #85155 now have this note showing the source of the erroneous const argument:
```
note: the above error was encountered while instantiating `fn std::arch::x86_64::_mm_blend_ps::<51_i32>`
--> issue-85155.rs:11:24
|
11 | let _blended = _mm_blend_ps(a, b, 0x33);
| ^^^^^^^^^^^^^^^^^^^^^^^^
error: aborting due to previous error
```
Note that #85155 is a reduced version of a case happening in the wild, to indirect users of the `rustfft` crate, as seen in https://github.com/ejmahler/RustFFT/issues/74. The crate had a few of these out-of-range immediates. Here's how the diagnostics in this PR would have looked on one of its examples before it was fixed:
<details>
```
error[E0080]: evaluation of constant value failed
--> ./stdarch/crates/core_arch/src/macros.rs:8:9
|
8 | assert!(IMM >= MIN && IMM <= MAX, "IMM value not in expected range");
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ the evaluated program panicked at 'IMM value not in expected range', ./stdarch/crates/core_arch/src/macros.rs:8:9
|
= note: this error originates in the macro `$crate::panic::panic_2015` (in Nightly builds, run with -Z macro-backtrace for more info)
note: the above error was encountered while instantiating `fn _mm_blend_ps::<51_i32>`
--> /tmp/RustFFT/src/avx/avx_vector.rs:1314:23
|
1314 | let blended = _mm_blend_ps(rows[0], rows[2], 0x33);
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
note: the above error was encountered while instantiating `fn _mm_permute_pd::<5_i32>`
--> /tmp/RustFFT/src/avx/avx_vector.rs:1859:9
|
1859 | _mm_permute_pd(self, 0x05)
| ^^^^^^^^^^^^^^^^^^^^^^^^^^
note: the above error was encountered while instantiating `fn _mm_permute_pd::<15_i32>`
--> /tmp/RustFFT/src/avx/avx_vector.rs:1863:32
|
1863 | (_mm_movedup_pd(self), _mm_permute_pd(self, 0x0F))
| ^^^^^^^^^^^^^^^^^^^^^^^^^^
error: aborting due to previous error
For more information about this error, try `rustc --explain E0080`.
error: could not compile `rustfft`
To learn more, run the command again with --verbose.
```
</details>
I've developed and discussed this with them, so maybe r? `@oli-obk` -- but feel free to redirect to someone else of course.
(I'm not sure we can say that this PR definitely closes issue 85155, as it's still unclear exactly which diagnostics and information would be interesting to report in such cases -- and we've discussed printing backtraces before. I have prototypes of some complete and therefore noisy backtraces I showed Oli, but we decided to not include them in this PR for now)
Emit a diagnostic when the monomorphized item collector
encounters errors during a step of the recursive item collection.
These post-monomorphization errors otherwise only show the
erroneous expression without a trace, making them very obscure
and hard to pinpoint whenever they happen in dependencies.
Bump bootstrap compiler to beta 1.53.0
This PR bumps the bootstrap compiler to version 1.53.0 beta, as part of our usual release process (this was supposed to be Wednesday's step, but creating the beta release took longer than expected).
The PR also includes the "Bootstrap: skip rustdoc fingerprint for building docs" commit, see the reasoning [on Zulip](https://zulip-archive.rust-lang.org/241545trelease/88450153betabootstrap.html).
r? `@Mark-Simulacrum`
Make building THIR a stealable query
This PR creates a stealable `thir_body` query so that we can build the THIR only once for THIR unsafeck and MIR build.
Blocked on #83842.
r? `@nikomatsakis`
CTFE core engine allocation & memory API improvemenets
This is a first step towards https://github.com/rust-lang/miri/issues/841.
- make `Allocation` API offset-based (no more making up `Pointer`s just to access an `Allocation`)
- make `Memory` API higher-level (combine checking for access and getting access into one operation)
The Miri-side PR is at https://github.com/rust-lang/miri/pull/1804.
r? `@oli-obk`
- make Allocation API offset-based (no more Pointer)
- make Memory API higher-level (combine checking for access and getting access into one operation)
Rollup of 7 pull requests
Successful merges:
- #84587 (rustdoc: Make "rust code block is empty" and "could not parse code block" warnings a lint (`INVALID_RUST_CODEBLOCKS`))
- #85280 (Toggle-wrap items differently than top-doc.)
- #85338 (Implement more Iterator methods on core::iter::Repeat)
- #85339 (Report an error if a lang item has the wrong number of generic arguments)
- #85369 (Suggest borrowing if a trait implementation is found for &/&mut <type>)
- #85393 (Suppress spurious errors inside `async fn`)
- #85415 (Clean up remnants of BorrowOfPackedField)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Unify Regions with RegionVids in UnificationTable
A few test output changes; might be able to revert those but figured I would open this for perf and comments.
r? `@nikomatsakis`
Remove CrateNum parameter for queries that only work on local crate
The pervasive `CrateNum` parameter is a remnant of the multi-crate rustc idea.
Using `()` as query key in those cases avoids having to worry about the validity of the query key.
coverage bug fixes and some refactoring
This replaces the relevant commits (2 and 3) from PR #85082, and also corrects an error querying for coverageinfo.
1. `coverageinfo` query needs to use the same MIR as codegen
I ran into an error trying to fix dead block coverage and realized the
`coverageinfo` query is getting a different MIR compared to the
codegenned MIR, which can sometimes be a problem during mapgen.
I changed that query to use the `InstandeDef` (which includes the
generic parameter substitutions, prosibly specific to const params)
instead of the `DefId` (without unknown/default const substitutions).
2. Simplified body_span and filtered span code
Some code cleanup extracted from future (but unfinished) commit to fix
coverage in attr macro functions.
3. Spanview needs the relevant body_span used for coverage
The coverage body_span doesn't always match the function body_span.
r? ```@tmandry```
Introduce the beginning of a THIR unsafety checker
This poses the foundations for the THIR unsafety checker, so that it can be implemented incrementally:
- implements a rudimentary `Visitor` for the THIR (which will definitely need some tweaking in the future)
- introduces a new `-Zthir-unsafeck` flag which tells the compiler to use THIR unsafeck instead of MIR unsafeck
- implements detection of unsafe functions
- adds revisions to the UI tests to test THIR unsafeck alongside MIR unsafeck
This uses a very simple query design, where bodies are unsafety-checked on a body per body basis. This however has some big flaws:
- the unsafety-checker builds the THIR itself, which means a lot of work is duplicated with MIR building constructing its own copy of the THIR
- unsafety-checking closures is currently completely wrong: closures should take into account the "safety context" in which they are created, here we are considering that closures are always a safe context
I had intended to fix these problems in follow-up PRs since they are always gated under the `-Zthir-unsafeck` flag (which is explicitely noted to be unsound).
r? `@nikomatsakis`
cc https://github.com/rust-lang/project-thir-unsafeck/issues/3https://github.com/rust-lang/project-thir-unsafeck/issues/7
I ran into an error trying to fix dead block coverage and realized the
`coverageinfo` query is getting a different MIR compared to the
codegenned MIR, which can sometimes be a problem during mapgen.
I changed that query to use the `InstandeDef` (which includes the
generic parameter substitutions, prosibly specific to const params)
instead of the `DefId` (without unknown/default const substitutions).
Fix `--remap-path-prefix` not correctly remapping `rust-src` component paths and unify handling of path mapping with virtualized paths
This PR fixes#73167 ("Binaries end up containing path to the rust-src component despite `--remap-path-prefix`") by preventing real local filesystem paths from reaching compilation output if the path is supposed to be remapped.
`RealFileName::Named` introduced in #72767 is now renamed as `LocalPath`, because this variant wraps a (most likely) valid local filesystem path.
`RealFileName::Devirtualized` is renamed as `Remapped` to be used for remapped path from a real path via `--remap-path-prefix` argument, as well as real path inferred from a virtualized (during compiler bootstrapping) `/rustc/...` path. The `local_path` field is now an `Option<PathBuf>`, as it will be set to `None` before serialisation, so it never reaches any build output. Attempting to serialise a non-`None` `local_path` will cause an assertion faliure.
When a path is remapped, a `RealFileName::Remapped` variant is created. The original path is preserved in `local_path` field and the remapped path is saved in `virtual_name` field. Previously, the `local_path` is directly modified which goes against its purpose of "suitable for reading from the file system on the local host".
`rustc_span::SourceFile`'s fields `unmapped_path` (introduced by #44940) and `name_was_remapped` (introduced by #41508 when `--remap-path-prefix` feature originally added) are removed, as these two pieces of information can be inferred from the `name` field: if it's anything other than a `FileName::Real(_)`, or if it is a `FileName::Real(RealFileName::LocalPath(_))`, then clearly `name_was_remapped` would've been false and `unmapped_path` would've been `None`. If it is a `FileName::Real(RealFileName::Remapped{local_path, virtual_name})`, then `name_was_remapped` would've been true and `unmapped_path` would've been `Some(local_path)`.
cc `@eddyb` who implemented `/rustc/...` path devirtualisation
This PR implements span quoting, allowing proc-macros to produce spans
pointing *into their own crate*. This is used by the unstable
`proc_macro::quote!` macro, allowing us to get error messages like this:
```
error[E0412]: cannot find type `MissingType` in this scope
--> $DIR/auxiliary/span-from-proc-macro.rs:37:20
|
LL | pub fn error_from_attribute(_args: TokenStream, _input: TokenStream) -> TokenStream {
| ----------------------------------------------------------------------------------- in this expansion of procedural macro `#[error_from_attribute]`
...
LL | field: MissingType
| ^^^^^^^^^^^ not found in this scope
|
::: $DIR/span-from-proc-macro.rs:8:1
|
LL | #[error_from_attribute]
| ----------------------- in this macro invocation
```
Here, `MissingType` occurs inside the implementation of the proc-macro
`#[error_from_attribute]`. Previosuly, this would always result in a
span pointing at `#[error_from_attribute]`
This will make many proc-macro-related error message much more useful -
when a proc-macro generates code containing an error, users will get an
error message pointing directly at that code (within the macro
definition), instead of always getting a span pointing at the macro
invocation site.
This is implemented as follows:
* When a proc-macro crate is being *compiled*, it causes the `quote!`
macro to get run. This saves all of the sapns in the input to `quote!`
into the metadata of *the proc-macro-crate* (which we are currently
compiling). The `quote!` macro then expands to a call to
`proc_macro::Span::recover_proc_macro_span(id)`, where `id` is an
opaque identifier for the span in the crate metadata.
* When the same proc-macro crate is *run* (e.g. it is loaded from disk
and invoked by some consumer crate), the call to
`proc_macro::Span::recover_proc_macro_span` causes us to load the span
from the proc-macro crate's metadata. The proc-macro then produces a
`TokenStream` containing a `Span` pointing into the proc-macro crate
itself.
The recursive nature of 'quote!' can be difficult to understand at
first. The file `src/test/ui/proc-macro/quote-debug.stdout` shows
the output of the `quote!` macro, which should make this eaier to
understand.
This PR also supports custom quoting spans in custom quote macros (e.g.
the `quote` crate). All span quoting goes through the
`proc_macro::quote_span` method, which can be called by a custom quote
macro to perform span quoting. An example of this usage is provided in
`src/test/ui/proc-macro/auxiliary/custom-quote.rs`
Custom quoting currently has a few limitations:
In order to quote a span, we need to generate a call to
`proc_macro::Span::recover_proc_macro_span`. However, proc-macros
support renaming the `proc_macro` crate, so we can't simply hardcode
this path. Previously, the `quote_span` method used the path
`crate::Span` - however, this only works when it is called by the
builtin `quote!` macro in the same crate. To support being called from
arbitrary crates, we need access to the name of the `proc_macro` crate
to generate a path. This PR adds an additional argument to `quote_span`
to specify the name of the `proc_macro` crate. Howver, this feels kind
of hacky, and we may want to change this before stabilizing anything
quote-related.
Additionally, using `quote_span` currently requires enabling the
`proc_macro_internals` feature. The builtin `quote!` macro
has an `#[allow_internal_unstable]` attribute, but this won't work for
custom quote implementations. This will likely require some additional
tricks to apply `allow_internal_unstable` to the span of
`proc_macro::Span::recover_proc_macro_span`.
Use .name_str() to format primitive types in error messages
This pull request fixes#84976. The problem described there is caused by this code
506e75cbf8/compiler/rustc_middle/src/ty/error.rs (L161-L166)
using `Debug` formatting (`{:?}`), while the proper solution is to call `name_str()` of `ty::IntTy`, `ty::UintTy` and `ty::FloatTy`, respectively.
Add primary marker on codegen unit and generate main wrapper on primary codegen.
This is the codegen part of changes extracted from #84062.
This add a marker called `primary` on each codegen units, where exactly one codegen unit will be `primary = true` at a time. This specific codegen unit will take charge of generating `main` wrapper when `main` is imported from a foreign crate after the implementation of RFC 1260.
cc #28937
I'm not sure who should i ask for review for codegen changes, so feel free to reassign.
r? `@nagisa`
CTFE inbounds-error-messages tweak
* use CheckInAllocMsg::PointerArithmeticTest for ptr_offset error
* nicer errors for some null pointer cases
r? `@oli-obk`
This commit implements both the native linking modifiers infrastructure
as well as an initial attempt at the individual modifiers from the RFC.
It also introduces a feature flag for the general syntax along with
individual feature flags for each modifier.
Remove `rustc_middle::mir::interpret::CheckInAllocMsg::NullPointerTest`
Removing it per https://github.com/rust-lang/rust/pull/84842#discussion_r625589674: it's a dead enum variant.
Note that `PointerArithmeticTest` also seems dead:
```
$ rg -F PointerArithmeticTest -C5
compiler/rustc_middle/src/mir/interpret/error.rs
169-
170-/// Details of why a pointer had to be in-bounds.
171-#[derive(Debug, Copy, Clone, TyEncodable, TyDecodable, HashStable)]
172-pub enum CheckInAllocMsg {
173- MemoryAccessTest,
174: PointerArithmeticTest,
175- InboundsTest,
176-}
177-
178-impl fmt::Display for CheckInAllocMsg {
179- /// When this is printed as an error the context looks like this
--
182- write!(
183- f,
184- "{}",
185- match *self {
186- CheckInAllocMsg::MemoryAccessTest => "memory access",
187: CheckInAllocMsg::PointerArithmeticTest => "pointer arithmetic",
188- CheckInAllocMsg::InboundsTest => "inbounds test",
189- }
190- )
191- }
192-}
```
Not sure if that is also desirable to be removed, however.
Update BARE_TRAIT_OBJECT and ELLIPSIS_INCLUSIVE_RANGE_PATTERNS to errors in Rust 2021
This addresses https://github.com/rust-lang/rust/pull/81244 by updating two lints to errors in the Rust 2021 edition.
r? `@estebank`
This ensures that `ParamEnv::and` preserves the original `caller_bounds`
when we have a value containing fresh tys/consts. This ensures that when
we cache a `SelectionCandidate`, the cache key (a `ParamEnvAnd`)
contains all of the information that influenced the computation of our
result (e.g. we may end up choosing a `ParamCandidate`)
Move HIR parenting information out of hir_owner
Split out of #82681.
The parent of a HIR node and its content are currently bundled together, but are rarely used together.
This PR separates both information in two distinct queries for HIR owners.
This reduces incremental invalidation for HIR items that appear within a function body when this body (and the local ids) changes.
Move iter_results to dyn FnMut rather than a generic
This means that we're no longer generating the iteration/locking code for each invocation site of iter_results, rather just once per query (roughly), which seems much better: this is a 15% win in instruction counts when compiling the rustc_query_impl crate. The code where this is used also is pretty cold, I suspect; the old solution didn't fully monomorphize either.
Implement RFC 1260 with feature_name `imported_main`.
This is the second extraction part of #84062 plus additional adjustments.
This (mostly) implements RFC 1260.
However there's still one test case failure in the extern crate case. Maybe `LocalDefId` doesn't work here? I'm not sure.
cc https://github.com/rust-lang/rust/issues/28937
r? `@petrochenkov`
This means that we're no longer generating the iteration/locking code for each
invocation site of iter_results, rather just once per query.
This is a 15% win in instruction counts when compiling the rustc_query_impl crate.
Add TRACKED_NO_CRATE_HASH and use it for `--remap-path-prefix`
I verified locally that this fixes https://github.com/rust-lang/rust/issues/66955.
r? `@Aaron1011` (feel free to reassign)
Adds feature-gated `#[no_coverage]` function attribute, to fix derived Eq `0` coverage issue #83601
Derived Eq no longer shows uncovered
The Eq trait has a special hidden function. MIR `InstrumentCoverage`
would add this function to the coverage map, but it is never called, so
the `Eq` trait would always appear uncovered.
Fixes: #83601
The fix required creating a new function attribute `no_coverage` to mark
functions that should be ignored by `InstrumentCoverage` and the
coverage `mapgen` (during codegen).
Adding a `no_coverage` feature gate with tracking issue #84605.
r? `@tmandry`
cc: `@wesleywiser`
The Eq trait has a special hidden function. MIR `InstrumentCoverage`
would add this function to the coverage map, but it is never called, so
the `Eq` trait would always appear uncovered.
Fixes: #83601
The fix required creating a new function attribute `no_coverage` to mark
functions that should be ignored by `InstrumentCoverage` and the
coverage `mapgen` (during codegen).
While testing, I also noticed two other issues:
* spanview debug file output ICEd on a function with no body. The
workaround for this is included in this PR.
* `assert_*!()` macro coverage can appear covered if followed by another
`assert_*!()` macro. Normally they appear uncovered. I submitted a new
Issue #84561, and added a coverage test to demonstrate this issue.
This is necessary for options that should invalidate the incremental
hash but *not* affect the crate hash (e.g. --remap-path-prefix).
This doesn't add `for_crate_hash` to the trait directly because it's not
relevant for *types*, only for *options*, which are fields on a larger
struct. Instead, it adds a new `SUBSTRUCT` directive for options, which
does take a `for_crate_hash` parameter.
- Use TRACKED_NO_CRATE_HASH for --remap-path-prefix
- Add test that `remap_path_prefix` is tracked
- Reduce duplication in the test suite to avoid future churn
Get rid of is_min_const_fn
This removes the last trace of the min_const_fn mechanism by making the unsafety checker agnostic about whether something is a min or "non-min" const fn. It seems this distinction was used to disallow some features inside `const fn`, but that is the responsibility of the const checker, not of the unsafety checker. No test seems to even notice this change in the unsafety checker so I guess we are good...
r? `@oli-obk`
Cc https://github.com/rust-lang/rust/issues/84510
various const parameter defaults improvements
Actually resolve names in const parameter defaults, fixing `struct Foo<const N: usize = { usize::MAX }>`.
---
Split generic parameter ban rib for types and consts, allowing
```rust
#![feature(const_generics_defaults)]
struct Q;
struct Foo<T = Q, const Q: usize = 3>(T);
```
---
Remove the type/const ordering restriction if `const_generics_defaults` is active, even if `const_generics` is not. allowing us to stabilize and test const param defaults separately.
---
Check well formedness of const parameter defaults, eagerly emitting an error for `struct Foo<const N: usize = { 0 - 1 }>`
---
Do not forbid const parameters in param defaults, allowing `struct Foo<const N: usize, T = [u8; N]>(T)` and `struct Foo<const N: usize, const M: usize = N>`. Note that this should not change anything which is stabilized, as on stable, type parameters must be in front of const parameters, which means that type parameter defaults are only allowed if no const parameters exist.
We still forbid generic parameters inside of const param types.
r? `@varkor` `@petrochenkov`
Cautiously add IntoIterator for arrays by value
Add the attribute described in #84133, `#[rustc_skip_array_during_method_dispatch]`, which effectively hides a trait from method dispatch when the receiver type is an array.
Then cherry-pick `IntoIterator for [T; N]` from #65819 and gate it with that attribute. Arrays can now be used as `IntoIterator` normally, but `array.into_iter()` has edition-dependent behavior, returning `slice::Iter` for 2015 and 2018 editions, or `array::IntoIter` for 2021 and later.
r? `@nikomatsakis`
cc `@LukasKalbertodt` `@rust-lang/libs`
further split up const_fn feature flag
This continues the work on splitting up `const_fn` into separate feature flags:
* `const_fn_trait_bound` for `const fn` with trait bounds
* `const_fn_unsize` for unsizing coercions in `const fn` (looks like only `dyn` unsizing is still guarded here)
I don't know if there are even any things left that `const_fn` guards... at least libcore and liballoc do not need it any more.
`@oli-obk` are you currently able to do reviews?
Implement a lint that highlights all moves larger than a configured limit
Tracking issue: #83518
[MCP 420](https://github.com/rust-lang/compiler-team/issues/420) still ~blazing~ in progress
r? ```@pnkfelix```
The main open issue I see with this minimal impl of the feature is that the lint is immediately "stable" (so it can be named on stable), even if it is never executed on stable. I don't think we have the concept of unstable lint names or hiding lint names without an active feature gate, so that would be a bigger change.
Introduce CompileMonoItem DepNode
This is likely required for allowing efficient hot code swap support in cg_clif's jit mode. My prototype currently requires re-compiling all functions, which is both slow and uses a lot of memory as there is not support for freeing the memory used by replaced functions yet.
cc https://github.com/bjorn3/rustc_codegen_cranelift/issues/1087
Improve trait/impl method discrepancy errors
* Use more accurate spans
* Clean up some code by removing previous hack
* Provide structured suggestions
Structured suggestions are particularly useful for cases where arbitrary self types are used, like in custom `Future`s, because the way to write `self: Pin<&mut Self>` is not necessarily self-evident when first encountered.
Don't concatenate binders across types
Partially addresses #83737
There's actually two issues that I uncovered in #83737. The first is that we are concatenating bound vars across types, i.e. in
```
F: Fn(&()) -> &mut (dyn Future<Output = ()> + Unpin)
```
the bound vars on `Future` get set as `for<anon>` since those are the binders on `Fn(&()`. This is obviously wrong, since we should only concatenate directly nested trait refs. This is solved here by introducing a new `TraitRefBoundary` scope, that we put around the "syntactical" trait refs and basically don't allow concatenation across.
Now, this alone *shouldn't* be a super terrible problem. At least not until you consider the other issue, which is a much more elusive and harder to design a "perfect" fix. A repro can be seen in:
```
use core::future::Future;
async fn handle<F>(slf: &F)
where
F: Fn(&()) -> &mut (dyn for<'a> Future<Output = ()> + Unpin),
{
(slf)(&()).await;
}
```
Notice the `for<'a>` around `Future`. Here, `'a` is unused, so the `for<'a>` Binder gets changed to a `for<>` Binder in the generator witness, but the "local decl" still has it. This has heavy intersections with region anonymization and erasing. Luckily, it's not *super* common to find this unique set of circumstances. It only became apparently because of the first issue mentioned here. However, this *is* still a problem, so I'm leaving #83737 open.
r? `@nikomatsakis`
This commit implements the idea of a new ABI for the WebAssembly target,
one called `"wasm"`. This ABI is entirely of my own invention
and has no current precedent, but I think that the addition of this ABI
might help solve a number of issues with the WebAssembly targets.
When `wasm32-unknown-unknown` was first added to Rust I naively
"implemented an abi" for the target. I then went to write `wasm-bindgen`
which accidentally relied on details of this ABI. Turns out the ABI
definition didn't match C, which is causing issues for C/Rust interop.
Currently the compiler has a "wasm32 bindgen compat" ABI which is the
original implementation I added, and it's purely there for, well,
`wasm-bindgen`.
Another issue with the WebAssembly target is that it's not clear to me
when and if the default C ABI will change to account for WebAssembly's
multi-value feature (a feature that allows functions to return multiple
values). Even if this does happen, though, it seems like the C ABI will
be guided based on the performance of WebAssembly code and will likely
not match even what the current wasm-bindgen-compat ABI is today. This
leaves a hole in Rust's expressivity in binding WebAssembly where given
a particular import type, Rust may not be able to import that signature
with an updated C ABI for multi-value.
To fix these issues I had the idea of a new ABI for WebAssembly, one
called `wasm`. The definition of this ABI is "what you write
maps straight to wasm". The goal here is that whatever you write down in
the parameter list or in the return values goes straight into the
function's signature in the WebAssembly file. This special ABI is for
intentionally matching the ABI of an imported function from the
environment or exporting a function with the right signature.
With the addition of a new ABI, this enables rustc to:
* Eventually remove the "wasm-bindgen compat hack". Once this
ABI is stable wasm-bindgen can switch to using it everywhere.
Afterwards the wasm32-unknown-unknown target can have its default ABI
updated to match C.
* Expose the ability to precisely match an ABI signature for a
WebAssembly function, regardless of what the C ABI that clang chooses
turns out to be.
* Continue to evolve the definition of the default C ABI to match what
clang does on all targets, since the purpose of that ABI will be
explicitly matching C rather than generating particular function
imports/exports.
Naturally this is implemented as an unstable feature initially, but it
would be nice for this to get stabilized (if it works) in the near-ish
future to remove the wasm32-unknown-unknown incompatibility with the C
ABI. Doing this, however, requires the feature to be on stable because
wasm-bindgen works with stable Rust.
Stabilize cmp_min_max_by
I would like to propose cmp::{min_by, min_by_key, max_by, max_by_key}
for stabilization.
These are relatively simple and seemingly uncontroversial functions and
have been unchanged in unstable for a while now.
Closes: #64460
I would like to propose cmp::{min_by, min_by_key, max_by, max_by_key}
for stabilization.
These are relatively simple and seemingly uncontroversial functions and
have been unchanged in unstable for a while now.
Use AnonConst for asm! constants
This replaces the old system which used explicit promotion. See #83169 for more background.
The syntax for `const` operands is still the same as before: `const <expr>`.
Fixes#83169
Because the implementation is heavily based on inline consts, we suffer from the same issues:
- We lose the ability to use expressions derived from generics. See the deleted tests in `src/test/ui/asm/const.rs`.
- We are hitting the same ICEs as inline consts, for example #78174. It is unlikely that we will be able to stabilize this before inline consts are stabilized.
Allow specifying alignment for functions
Fixes#75072
This allows the user to specify alignment for functions, which can be useful for low level work where functions need to necessarily be aligned to a specific value.
I believe the error cases not covered in the match are caught earlier based on my testing so I had them just return `None`.
Prevent very long compilation runtimes in LateBoundRegionNameCollector
Fixes https://github.com/rust-lang/rust/issues/83150
On recursive types such as in the example given in https://github.com/rust-lang/rust/issues/83150, the current implementation of `LateBoundRegionNameCollector` has very long compilation runtimes. To prevent those we store the types visited in the `middle::ty::Visitor` implementation of `LateBoundRegionNameCollector` in a `SsoHashSet`.
2229: Fix diagnostic issue when using FakeReads in closures
This PR fixes a diagnostic issue caused by https://github.com/rust-lang/rust/pull/82536. A temporary work around was used in this merged PR which involved feature gating the addition of FakeReads introduced as a result of pattern matching in closures.
The fix involves adding an optional closure DefId to ForLet and ForMatchedPlace FakeReadCauses. This DefId will only be added if a closure pattern matches a Place starting with an Upvar.
r? ```@nikomatsakis```
Translate counters from Rust 1-based to LLVM 0-based counter ids
A colleague contacted me and asked why Rust's counters start at 1, when
Clangs appear to start at 0. There is a reason why Rust's internal
counters start at 1 (see the docs), and I tried to keep them consistent
when codegenned to LLVM's coverage mapping format. LLVM should be
tolerant of missing counters, but as my colleague pointed out,
`llvm-cov` will silently fail to generate a coverage report for a
function based on LLVM's assumption that the counters are 0-based.
See:
https://github.com/llvm/llvm-project/blob/main/llvm/lib/ProfileData/Coverage/CoverageMapping.cpp#L170
Apparently, if, for example, a function has no branches, it would have
exactly 1 counter. `CounterValues.size()` would be 1, and (with the
1-based index), the counter ID would be 1. This would fail the check
and abort reporting coverage for the function.
It turns out that by correcting for this during coverage map generation,
by subtracting 1 from the Rust Counter ID (both when generating the
counter increment intrinsic call, and when adding counters to the map),
some uncovered functions (including in tests) now appear covered! This
corrects the coverage for a few tests!
r? `@tmandry`
FYI: `@wesleywiser`
A colleague contacted me and asked why Rust's counters start at 1, when
Clangs appear to start at 0. There is a reason why Rust's internal
counters start at 1 (see the docs), and I tried to keep them consistent
when codegenned to LLVM's coverage mapping format. LLVM should be
tolerant of missing counters, but as my colleague pointed out,
`llvm-cov` will silently fail to generate a coverage report for a
function based on LLVM's assumption that the counters are 0-based.
See:
https://github.com/llvm/llvm-project/blob/main/llvm/lib/ProfileData/Coverage/CoverageMapping.cpp#L170
Apparently, if, for example, a function has no branches, it would have
exactly 1 counter. `CounterValues.size()` would be 1, and (with the
1-based index), the counter ID would be 1. This would fail the check
and abort reporting coverage for the function.
It turns out that by correcting for this during coverage map generation,
by subtracting 1 from the Rust Counter ID (both when generating the
counter increment intrinsic call, and when adding counters to the map),
some uncovered functions (including in tests) now appear covered! This
corrects the coverage for a few tests!
normalize mir::Constant differently from ty::Const in preparation for valtrees
Valtrees are unable to represent many kind of constant values (this is on purpose). For constants that are used at runtime, we do not need a valtree representation and can thus use a different form of evaluation. In order to make this explicit and less fragile, I added a `fold_constant` method to `TypeFolder` and implemented it for normalization. Normalization can now, when it wants to eagerly evaluate a constant, normalize `mir::Constant` directly into a `mir::ConstantKind::Val` instead of relying on the `ty::Const` evaluation.
In the future we can get rid of the `ty::Const` in there entirely and add our own `Unevaluated` variant to `mir::ConstantKind`. This would allow us to remove the `promoted` field from `ty::ConstKind::Unevaluated`, as promoteds can never occur in the type system.
cc `@rust-lang/wg-const-eval`
r? `@lcnr`
Fix expected/found order on impl trait projection mismatch error
fixes#68561
This PR adds a new `ObligationCauseCode` used when checking the concrete type of an impl trait satisfies its bounds, and checks for that cause code in the existing test to see if a projection's normalized type should be the "expected" or "found" type.
The second commit adds a `peel_derives` to that test, which appears to be necessary in some cases (see projection-mismatch-in-impl-where-clause.rs, which would still give expected/found in the wrong order otherwise). This caused some other changes in diagnostics not involving impl trait, but they look correct to me.
Stream the dep-graph to a file instead of storing it in-memory.
This is a reimplementation of #60035.
Instead of storing the dep-graph in-memory, the nodes are encoded as they come
into the a temporary file as they come. At the end of a successful the compilation,
this file is renamed to be the persistent dep-graph, to be decoded during the next
compilation session.
This two-files scheme avoids overwriting the dep-graph on unsuccessful or crashing compilations.
The structure of the file is modified to be the sequence of `(DepNode, Fingerprint, EdgesVec)`.
The deserialization is responsible for going to the more compressed representation.
The `node_count` and `edge_count` are stored in the last 16 bytes of the file,
in order to accurately reserve capacity for the vectors.
At the end of the compilation, the encoder is flushed and dropped.
The graph is not usable after this point: any creation of a node will ICE.
I had to retrofit the debugging options, which is not really pretty.
rustdoc: Only look at blanket impls in `get_blanket_impls`
The idea here is that all the work in 16156fb278/compiler/rustc_middle/src/ty/trait_def.rs (L172-L186) doesn't matter for `get_blanket_impls` - Rustdoc will already pick up on those blocks when it documents the item.
Run LLVM coverage instrumentation passes before optimization passes
This matches the behavior of Clang and allows us to remove several
hacks which were needed to ensure functions weren't optimized away
before reaching the instrumentation pass.
Fixes#83429
cc `@richkadel`
r? `@tmandry`
This matches the behavior of Clang and allows us to remove several
hacks which were needed to ensure functions weren't optimized away
before reaching the instrumentation pass.
- Add back various diagnostic methods on `Session`.
It seems unfortunate to duplicate these in so many places, but in the
meantime, making the API inconsistent between `Session` and `Diagnostic`
also seems unfortunate.
- Add back TyCtxtAt methods
These will hopefully be used in the near future.
- Add back `with_const`, it would need to be added soon after anyway.
- Add back `split()` and `get_mut()`, they're useful.
Found with https://github.com/est31/warnalyzer.
Dubious changes:
- Is anyone else using rustc_apfloat? I feel weird completely deleting
x87 support.
- Maybe some of the dead code in rustc_data_structures, in case someone
wants to use it in the future?
- Don't change rustc_serialize
I plan to scrap most of the json module in the near future (see
https://github.com/rust-lang/compiler-team/issues/418) and fixing the
tests needed more work than I expected.
TODO: check if any of the comments on the deleted code should be kept.
Add function core::iter::zip
This makes it a little easier to `zip` iterators:
```rust
for (x, y) in zip(xs, ys) {}
// vs.
for (x, y) in xs.into_iter().zip(ys) {}
```
You can `zip(&mut xs, &ys)` for the conventional `iter_mut()` and
`iter()`, respectively. This can also support arbitrary nesting, where
it's easier to see the item layout than with arbitrary `zip` chains:
```rust
for ((x, y), z) in zip(zip(xs, ys), zs) {}
for (x, (y, z)) in zip(xs, zip(ys, zs)) {}
// vs.
for ((x, y), z) in xs.into_iter().zip(ys).zip(xz) {}
for (x, (y, z)) in xs.into_iter().zip((ys.into_iter().zip(xz)) {}
```
It may also format more nicely, especially when the first iterator is a
longer chain of methods -- for example:
```rust
iter::zip(
trait_ref.substs.types().skip(1),
impl_trait_ref.substs.types().skip(1),
)
// vs.
trait_ref
.substs
.types()
.skip(1)
.zip(impl_trait_ref.substs.types().skip(1))
```
This replaces the tuple-pair `IntoIterator` in #78204.
There is prior art for the utility of this in [`itertools::zip`].
[`itertools::zip`]: https://docs.rs/itertools/0.10.0/itertools/fn.zip.html
make unaligned_references future-incompat lint warn-by-default
and also remove the safe_packed_borrows lint that it replaces.
`std::ptr::addr_of!` has hit beta now and will hit stable in a month, so I propose we start fixing https://github.com/rust-lang/rust/issues/27060 for real: creating a reference to a field of a packed struct needs to eventually become a hard error; this PR makes it a warn-by-default future-incompat lint. (The lint already existed, this just raises its default level.) At the same time I removed the corresponding code from unsafety checking; really there's no reason an `unsafe` block should make any difference here.
For references to packed fields outside `unsafe` blocks, this means `unaligned_refereces` replaces the previous `safe_packed_borrows` warning with a link to https://github.com/rust-lang/rust/issues/82523 (and no more talk about unsafe blocks making any difference). So behavior barely changes, the warning is just worded differently. For references to packed fields inside `unsafe` blocks, this PR shows a new future-incompat warning.
Closes https://github.com/rust-lang/rust/issues/46043 because that lint no longer exists.
combine: stop eagerly evaluating consts
`super_relate_consts` eagerly evaluates constants which doesn't seem too great.
I now also finally understand why all of the unused substs test passed. The reason being
that we just evaluated the constants in `super_relate_consts` 😆
While this change isn't strictly necessary as evaluating consts here doesn't hurt, it still feels a lot cleaner to do it this way
r? `@oli-obk` `@nikomatsakis`
Allow for reading raw bytes from rustc_serialize::Decoder without unsafe code
The current `read_raw_bytes` method requires using `MaybeUninit` and `unsafe`. I don't think this is necessary. Let's see if a safe interface has any performance drawbacks.
This is a followup to #83273 and will make it easier to rebase #82183.
r? `@cjgillot`
Refactor rustc_resolve::late::lifetimes to resolve per-item
There are some changes to tests that I'd like some feedback on; so this is still WIP.
The reason behind this change will (hopefully) allow us to (as part of #76814) be able to essentially use the lifetime resolve code to resolve *all* late bound vars (including those of super traits). Currently, it only resolves those that are *syntactically* in scope. In #76814, I'm essentially finding that I would essentially have to redo the passing of bound vars through scopes (i.e. when instantiating a poly trait ref), and that's what this code does anyways. However, to be able to do this (ask super traits what bound vars are in scope), we have to be able to resolve items separately.
The first commit is actually partially orthogonal. Essentially removing one use of late bound debruijn indices.
Not exactly sure who would be best to review here.
Let r? `@nikomatsakis`
GenericParam does not need to be a HIR owner.
The special case is not required.
Universal impl traits design to regular generic parameters, and their content is owned by the enclosing item.
Existential (and opaque) impl traits generate their own enclosing item, and are collected through it.
coverage bug fixes and optimization support
Adjusted LLVM codegen for code compiled with `-Zinstrument-coverage` to
address multiple, somewhat related issues.
Fixed a significant flaw in prior coverage solution: Every counter
generated a new counter variable, but there should have only been one
counter variable per function. This appears to have bloated .profraw
files significantly. (For a small program, it increased the size by
about 40%. I have not tested large programs, but there is anecdotal
evidence that profraw files were way too large. This is a good fix,
regardless, but hopefully it also addresses related issues.
Fixes: #82144
Invalid LLVM coverage data produced when compiled with -C opt-level=1
Existing tests now work up to at least `opt-level=3`. This required a
detailed analysis of the LLVM IR, comparisons with Clang C++ LLVM IR
when compiled with coverage, and a lot of trial and error with codegen
adjustments.
The biggest hurdle was figuring out how to continue to support coverage
results for unused functions and generics. Rust's coverage results have
three advantages over Clang's coverage results:
1. Rust's coverage map does not include any overlapping code regions,
making coverage counting unambiguous.
2. Rust generates coverage results (showing zero counts) for all unused
functions, including generics. (Clang does not generate coverage for
uninstantiated template functions.)
3. Rust's unused functions produce minimal stubbed functions in LLVM IR,
sufficient for including in the coverage results; while Clang must
generate the complete LLVM IR for each unused function, even though
it will never be called.
This PR removes the previous hack of attempting to inject coverage into
some other existing function instance, and generates dedicated instances
for each unused function. This change, and a few other adjustments
(similar to what is required for `-C link-dead-code`, but with lower
impact), makes it possible to support LLVM optimizations.
Fixes: #79651
Coverage report: "Unexecuted instantiation:..." for a generic function
from multiple crates
Fixed by removing the aforementioned hack. Some "Unexecuted
instantiation" notices are unavoidable, as explained in the
`used_crate.rs` test, but `-Zinstrument-coverage` has new options to
back off support for either unused generics, or all unused functions,
which avoids the notice, at the cost of less coverage of unused
functions.
Fixes: #82875
Invalid LLVM coverage data produced with crate brotli_decompressor
Fixed by disabling the LLVM function attribute that forces inlining, if
`-Z instrument-coverage` is enabled. This attribute is applied to
Rust functions with `#[inline(always)], and in some cases, the forced
inlining breaks coverage instrumentation and reports.
FYI: `@wesleywiser`
r? `@tmandry`
This currently creates a field which is always false on GenericParamDefKind for future use when
consts are permitted to have defaults
Update const_generics:default locations
Previously just ignored them, now actually do something about them.
Fix using type check instead of value
Add parsing
This adds all the necessary changes to lower const-generics defaults from parsing.
Change P<Expr> to AnonConst
This matches the arguments passed to instantiations of const generics, and makes it specific to
just anonymous constants.
Attempt to fix lowering bugs
This saves us both the Freeze/Unpin queries, and avoids placing
noalias attributes, which have a compile-time impact on LLVM
even in optnone builds (due to always_inline functions).
Such structures may contain self-references, in which case the
same location may be accessible through a pointer that is not
based-on the noalias pointer.
This is still grey area as far as language semantics are concerned,
but checking for !Unpin as an indicator for self-referential
sturctures seems like a good approach for the meantime.
The frontend shouldn't be deciding whether or not to use mutable
noalias attributes, as this is a pure LLVM concern. Only provide
the necessary information and do the actual decision in
codegen_llvm.
const_evaluatable_checked: Stop eagerly erroring in `is_const_evaluatable`
Fixes#82279
We don't want to be emitting errors inside of is_const_evaluatable because we may call this during selection where it should be able to fail silently
There were two errors being emitted in `is_const_evaluatable`. The one causing the compile error in #82279 was inside the match arm for `FailureKind::MentionsParam` but I moved the other error being emitted too since it made things cleaner imo
The `NotConstEvaluatable` enum \*should\* have a fourth variant for when we fail to evaluate a concrete const, e.g. `0 - 1` but that cant happen until #81339
cc `@oli-obk` `@lcnr`
r? `@nikomatsakis`
Adjusted LLVM codegen for code compiled with `-Zinstrument-coverage` to
address multiple, somewhat related issues.
Fixed a significant flaw in prior coverage solution: Every counter
generated a new counter variable, but there should have only been one
counter variable per function. This appears to have bloated .profraw
files significantly. (For a small program, it increased the size by
about 40%. I have not tested large programs, but there is anecdotal
evidence that profraw files were way too large. This is a good fix,
regardless, but hopefully it also addresses related issues.
Fixes: #82144
Invalid LLVM coverage data produced when compiled with -C opt-level=1
Existing tests now work up to at least `opt-level=3`. This required a
detailed analysis of the LLVM IR, comparisons with Clang C++ LLVM IR
when compiled with coverage, and a lot of trial and error with codegen
adjustments.
The biggest hurdle was figuring out how to continue to support coverage
results for unused functions and generics. Rust's coverage results have
three advantages over Clang's coverage results:
1. Rust's coverage map does not include any overlapping code regions,
making coverage counting unambiguous.
2. Rust generates coverage results (showing zero counts) for all unused
functions, including generics. (Clang does not generate coverage for
uninstantiated template functions.)
3. Rust's unused functions produce minimal stubbed functions in LLVM IR,
sufficient for including in the coverage results; while Clang must
generate the complete LLVM IR for each unused function, even though
it will never be called.
This PR removes the previous hack of attempting to inject coverage into
some other existing function instance, and generates dedicated instances
for each unused function. This change, and a few other adjustments
(similar to what is required for `-C link-dead-code`, but with lower
impact), makes it possible to support LLVM optimizations.
Fixes: #79651
Coverage report: "Unexecuted instantiation:..." for a generic function
from multiple crates
Fixed by removing the aforementioned hack. Some "Unexecuted
instantiation" notices are unavoidable, as explained in the
`used_crate.rs` test, but `-Zinstrument-coverage` has new options to
back off support for either unused generics, or all unused functions,
which avoids the notice, at the cost of less coverage of unused
functions.
Fixes: #82875
Invalid LLVM coverage data produced with crate brotli_decompressor
Fixed by disabling the LLVM function attribute that forces inlining, if
`-Z instrument-coverage` is enabled. This attribute is applied to
Rust functions with `#[inline(always)], and in some cases, the forced
inlining breaks coverage instrumentation and reports.
Replace closures_captures and upvar_capture with closure_min_captures
Removed all uses of closures_captures and upvar_capture and refactored code to work with closure_min_captures. This also involved removing functions that were no longer needed like the bridge.
Closes https://github.com/rust-lang/project-rfc-2229/issues/18
r? `@nikomatsakis`
make changes to liveness to use closure_min_captures
use different span
borrow check uses new structures
rename to CapturedPlace
stop using upvar_capture in regionck
remove the bridge
cleanup from rebase + remove the upvar_capture reference from mutability_errors.rs
remove line from livenes test
make our unused var checking more consistent
update tests
adding more warnings to the tests
move is_ancestor_or_same_capture to rustc_middle/ty
update names to reflect the closures
add FIXME
check that all captures are immutable borrows before returning
add surrounding if statement like the original
move var out of the loop and rename
Co-authored-by: Logan Mosier <logmosier@gmail.com>
Co-authored-by: Roxane Fruytier <roxane.fruytier@hotmail.com>
Make source-based code coverage compatible with MIR inlining
When codegenning code coverage use the instance that coverage data was
originally generated for, to ensure basic level of compatibility with
MIR inlining.
Fixes#83061
ast/hir: Rename field-related structures
I always forget what `ast::Field` and `ast::StructField` mean despite working with AST for long time, so this PR changes the naming to less confusing and more consistent.
- `StructField` -> `FieldDef` ("field definition")
- `Field` -> `ExprField` ("expression field", not "field expression")
- `FieldPat` -> `PatField` ("pattern field", not "field pattern")
Various visiting and other methods working with the fields are renamed correspondingly too.
The second commit reduces the size of `ExprKind` by boxing fields of `ExprKind::Struct` in preparation for https://github.com/rust-lang/rust/pull/80080.
Do not insert impl_trait_in_bindings opaque definitions twice.
The reference to the item already appears inside the `OpaqueDef`. It does not need to be repeated as a statement.
Implement (but don't use) valtree and refactor in preparation of use
This PR does not cause any functional change. It refactors various things that are needed to make valtrees possible. This refactoring got big enough that I decided I'd want it reviewed as a PR instead of trying to make one huge PR with all the changes.
cc `@rust-lang/wg-const-eval` on the following commits:
* 2027184 implement valtree
* eeecea9 fallible Scalar -> ScalarInt
* 042f663 ScalarInt convenience methods
cc `@eddyb` on ef04a6d
cc `@rust-lang/wg-mir-opt` for cf1700c (`mir::Constant` can now represent either a `ConstValue` or a `ty::Const`, and it is totally possible to have two different representations for the same value)
2229: Handle patterns within closures correctly when `capture_disjoint_fields` is enabled
This PR fixes several issues related to handling patterns within closures when `capture_disjoint_fields` is enabled.
1. Matching is always considered a use of the place, even with `_` patterns
2. Compiler ICE when capturing fields in closures through `let` assignments
To do so, we
- Introduced new Fake Reads
- Delayed use of `Place` in favor of `PlaceBuilder`
- Ensured that `PlaceBuilder` can be resolved before attempting to extract `Place` in any of the pattern matching code
Closes rust-lang/project-rfc-2229/issues/27
Closes rust-lang/project-rfc-2229/issues/24
r? `@nikomatsakis`
StructField -> FieldDef ("field definition")
Field -> ExprField ("expression field", not "field expression")
FieldPat -> PatField ("pattern field", not "field pattern")
Also rename visiting and other methods working on them.
83054 introduced validation of scalar range attributes, but panicking
code that uses the attribute remained reachable. Use `delay_span_bug`
instead to avoid the ICE.
Consider functions to be reachable for code coverage purposes, either
when they reach the code generation directly, or indirectly as inlined
part of another function.
Don't encode file information for span with a dummy location
Fixes#83112
The location information for a dummy span isn't real, so don't encode
it. This brings the incr comp cache code into line with the Span
`StableHash` impl, which doesn't hash the location information for dummy
spans.
Previously, we would attempt to load the 'original' file from a dummy
span - if the file id changed (e.g. due to being moved on disk), we would get an
ICE, since the Span was still valid due to its hash being unchanged.
Remove unused `opt_local_def_id_to_hir_id` function
Found while investigating #82933 - all LocalDefIds are expected to have
HirIds, there's no point in pretending otherwise.
Update to rustc-rayon 0.3.1
This pulls in rust-lang/rustc-rayon#8 to fix#81425. (h/t `@ammaraskar)`
That revealed weak constraints on `rustc_arena::DropArena`, because its
`DropType` was holding type-erased raw pointers to generic `T`. We can
implement `Send` for `DropType` (under `cfg(parallel_compiler)`) by
requiring all `T: Send` before they're type-erased.
Fixes#83112
The location information for a dummy span isn't real, so don't encode
it. This brings the incr comp cache code into line with the Span
`StableHash` impl, which doesn't hash the location information for dummy
spans.
Previously, we would attempt to load the 'original' file from a dummy
span - if the file id changed (e.g. due to being moved on disk), we would get an
ICE, since the Span was still valid due to its hash being unchanged.
Value trees won't have scalar ptr at all, so we need a scalar int printing method anyway. This way we'll be able to share that method between all const representations.
valtree is a version of constants that is inherently safe to be used within types.
This is in contrast to ty::Const which can have different representations of the same value. These representation differences can show up in hashing or equality comparisons, breaking type equality of otherwise equal types.
valtrees do not have this problem.
Shorten `rustc_middle::ty::mod`
Related to #60302.
This PR moves all `Adt*`, `Assoc*`, `Generic*`, and `UpVar*` types to separate files.
This, alongside some `use` reordering, puts `mod.rs` at ~2,200 lines, thus removing the `// ignore-tidy-filelength`.
The particular groups were chosen as they had 4 or more "substantive" members.
This pulls in rust-lang/rustc-rayon#8 to fix#81425. (h/t @ammaraskar)
That revealed weak constraints on `rustc_arena::DropArena`, because its
`DropType` was holding type-erased raw pointers to generic `T`. We can
implement `Send` for `DropType` (under `cfg(parallel_compiler)`) by
requiring all `T: Send` before they're type-erased.
Rollup of 9 pull requests
Successful merges:
- #81309 (always eagerly eval consts in Relate)
- #82217 (Edition-specific preludes)
- #82807 (rustdoc: Remove redundant enableSearchInput function)
- #82924 (WASI: Switch to crt1-command.o to enable support for new-style commands)
- #82949 (Do not attempt to unlock envlock in child process after a fork.)
- #82955 (fix: wrong word)
- #82962 (Treat header as first paragraph for shortened markdown descriptions)
- #82976 (fix error message for copy(_nonoverlapping) overflow)
- #82977 (Rename `Option::get_or_default` to `get_or_insert_default`)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Implement RFC 2945: "C-unwind" ABI
## Implement RFC 2945: "C-unwind" ABI
This branch implements [RFC 2945]. The tracking issue for this RFC is #74990.
The feature gate for the issue is `#![feature(c_unwind)]`.
This RFC was created as part of the ffi-unwind project group tracked at rust-lang/lang-team#19.
### Changes
Further details will be provided in commit messages, but a high-level overview
of the changes follows:
* A boolean `unwind` payload is added to the `C`, `System`, `Stdcall`,
and `Thiscall` variants, marking whether unwinding across FFI boundaries is
acceptable. The cases where each of these variants' `unwind` member is true
correspond with the `C-unwind`, `system-unwind`, `stdcall-unwind`, and
`thiscall-unwind` ABI strings introduced in RFC 2945 [3].
* This commit adds a `c_unwind` feature gate for the new ABI strings.
Tests for this feature gate are included in `src/test/ui/c-unwind/`, which
ensure that this feature gate works correctly for each of the new ABIs.
A new language features entry in the unstable book is added as well.
* We adjust the `rustc_middle::ty::layout::fn_can_unwind` function,
used to compute whether or not a `FnAbi` object represents a function that
should be able to unwind when `panic=unwind` is in use.
* Changes are also made to
`rustc_mir_build::build::should_abort_on_panic` so that the function ABI is
used to determind whether it should abort, assuming that the `panic=unwind`
strategy is being used, and no explicit unwind attribute was provided.
[RFC 2945]: https://github.com/rust-lang/rfcs/blob/master/text/2945-c-unwind-abi.md
Store HIR attributes in a side table
Same idea as #72015 but for attributes.
The objective is to reduce incr-comp invalidations due to modified attributes.
Notably, those due to modified doc comments.
Implementation:
- collect attributes during AST->HIR lowering, in `LocalDefId -> ItemLocalId -> &[Attributes]` nested tables;
- access the attributes through a `hir_owner_attrs` query;
- local refactorings to use this access;
- remove `attrs` from HIR data structures one-by-one.
Change in behaviour:
- the HIR visitor traverses all attributes at once instead of parent-by-parent;
- attribute arrays are sometimes duplicated: for statements and variant constructors;
- as a consequence, attributes are marked as used after unused-attribute lint emission to avoid duplicate lints.
~~Current bug: the lint level is not correctly applied in `std::backtrace_rs`, triggering an unused attribute warning on `#![no_std]`. I welcome suggestions.~~
Stabilize `unsafe_op_in_unsafe_fn` lint
This makes it possible to override the level of the `unsafe_op_in_unsafe_fn`, as proposed in https://github.com/rust-lang/rust/issues/71668#issuecomment-729770896.
Tracking issue: #71668
r? ```@nikomatsakis``` cc ```@SimonSapin``` ```@RalfJung```
# Stabilization report
This is a stabilization report for `#![feature(unsafe_block_in_unsafe_fn)]`.
## Summary
Currently, the body of unsafe functions is an unsafe block, i.e. you can perform unsafe operations inside.
The `unsafe_op_in_unsafe_fn` lint, stabilized here, can be used to change this behavior, so performing unsafe operations in unsafe functions requires an unsafe block.
For now, the lint is allow-by-default, which means that this PR does not change anything without overriding the lint level.
For more information, see [RFC 2585](https://github.com/rust-lang/rfcs/blob/master/text/2585-unsafe-block-in-unsafe-fn.md)
### Example
```rust
// An `unsafe fn` for demonstration purposes.
// Calling this is an unsafe operation.
unsafe fn unsf() {}
// #[allow(unsafe_op_in_unsafe_fn)] by default,
// the behavior of `unsafe fn` is unchanged
unsafe fn allowed() {
// Here, no `unsafe` block is needed to
// perform unsafe operations...
unsf();
// ...and any `unsafe` block is considered
// unused and is warned on by the compiler.
unsafe {
unsf();
}
}
#[warn(unsafe_op_in_unsafe_fn)]
unsafe fn warned() {
// Removing this `unsafe` block will
// cause the compiler to emit a warning.
// (Also, no "unused unsafe" warning will be emitted here.)
unsafe {
unsf();
}
}
#[deny(unsafe_op_in_unsafe_fn)]
unsafe fn denied() {
// Removing this `unsafe` block will
// cause a compilation error.
// (Also, no "unused unsafe" warning will be emitted here.)
unsafe {
unsf();
}
}
```
### Add debug assertion to check `AbiDatas` ordering
This makes a small alteration to `Abi::index`, so that we include a
debug assertion to check that the index we are returning corresponds
with the same abi in our data array.
This will help prevent ordering bugs in the future, which can
manifest in rather strange errors.
### Using exhaustive ABI matches
This slightly modifies the changes from our previous commits,
favoring exhaustive matches in place of `_ => ...` fall-through
arms.
This should help with maintenance in the future, when additional
ABI's are added, or when existing ABI's are modified.
### List all `-unwind` ABI's in unstable book
This updates the `c-unwind` page in the unstable book to list _all_
of the other ABI strings that are introduced by this feature gate.
Now, all of the ABI's specified by RFC 2945 are shown.
Co-authored-by: Amanieu d'Antras <amanieu@gmail.com>
Co-authored-by: Niko Matsakis <niko@alum.mit.edu>
### Changes
This commit implements unwind ABI's, specified in RFC 2945.
We adjust the `rustc_middle::ty::layout::fn_can_unwind` function,
used to compute whether or not a `FnAbi` object represents a
function that should be able to unwind when `panic=unwind` is in
use.
Changes are also made to
`rustc_mir_build::build::should_abort_on_panic` so that the
function ABI is used to determind whether it should abort, assuming
that the `panic=unwind` strategy is being used, and no explicit
unwind attribute was provided.
### Tests
Unit tests, checking that the behavior is correct for `C-unwind`,
`stdcall-unwind`, `system-unwind`, and `thiscall-unwind`, are
included. These alternative `unwind` ABI strings are specified in
RFC 2945, in the "_Other `unwind` ABI strings_" section.
Additionally, a test case is included to assert that the LLVM IR
generated for an external function defined with the `C-unwind` ABI
will be appropriately labeled with the `nounwind` LLVM attribute
when the `panic=abort` compilation flag is used.
### Ignore Directives
This commit uses `ignore-*` directives in two of our `*-unwind` ABI
test cases.
Specifically, the `stdcall-unwind` and `thiscall-unwind` test cases
ignore architectures that do not support `stdcall` and `thiscall`,
respectively.
These directives are cribbed from
`src/test/ui/c-variadic/variadic-ffi-1.rs` for `stdcall`, and
`src/test/ui/extern/extern-thiscall.rs` for `thiscall`.
### Overview
This commit begins the implementation work for RFC 2945. For more
information, see the rendered RFC [1] and tracking issue [2].
A boolean `unwind` payload is added to the `C`, `System`, `Stdcall`,
and `Thiscall` variants, marking whether unwinding across FFI
boundaries is acceptable. The cases where each of these variants'
`unwind` member is true correspond with the `C-unwind`,
`system-unwind`, `stdcall-unwind`, and `thiscall-unwind` ABI strings
introduced in RFC 2945 [3].
### Feature Gate and Unstable Book
This commit adds a `c_unwind` feature gate for the new ABI strings.
Tests for this feature gate are included in `src/test/ui/c-unwind/`,
which ensure that this feature gate works correctly for each of the
new ABIs.
A new language features entry in the unstable book is added as well.
### Further Work To Be Done
This commit does not proceed to implement the new unwinding ABIs,
and is intentionally scoped specifically to *defining* the ABIs and
their feature flag.
### One Note on Test Churn
This will lead to some test churn, in re-blessing hash tests, as the
deleted comment in `src/librustc_target/spec/abi.rs` mentioned,
because we can no longer guarantee the ordering of the `Abi`
variants.
While this is a downside, this decision was made bearing in mind
that RFC 2945 states the following, in the "Other `unwind` Strings"
section [3]:
> More unwind variants of existing ABI strings may be introduced,
> with the same semantics, without an additional RFC.
Adding a new variant for each of these cases, rather than specifying
a payload for a given ABI, would quickly become untenable, and make
working with the `Abi` enum prone to mistakes.
This approach encodes the unwinding information *into* a given ABI,
to account for the future possibility of other `-unwind` ABI
strings.
### Ignore Directives
`ignore-*` directives are used in two of our `*-unwind` ABI test
cases.
Specifically, the `stdcall-unwind` and `thiscall-unwind` test cases
ignore architectures that do not support `stdcall` and
`thiscall`, respectively.
These directives are cribbed from
`src/test/ui/c-variadic/variadic-ffi-1.rs` for `stdcall`, and
`src/test/ui/extern/extern-thiscall.rs` for `thiscall`.
This would otherwise fail on some targets, see:
fcf697f902
### Footnotes
[1]: https://github.com/rust-lang/rfcs/blob/master/text/2945-c-unwind-abi.md
[2]: https://github.com/rust-lang/rust/issues/74990
[3]: https://github.com/rust-lang/rfcs/blob/master/text/2945-c-unwind-abi.md#other-unwind-abi-strings
This updates all places where match branches check on StatementKind or UseContext.
This doesn't properly implement them, but adds TODOs where they are, and also adds some best
guesses to what they should be in some cases.
I'm still not totally sure if this is the right way to implement the memcpy, but that portion
compiles correctly now. Now to fix the compile errors everywhere else :).
Change x64 size checks to not apply to x32.
Rust contains various size checks conditional on target_arch = "x86_64", but these checks were never intended to apply to x86_64-unknown-linux-gnux32. Add target_pointer_width = "64" to the conditions.
Rust contains various size checks conditional on target_arch = "x86_64",
but these checks were never intended to apply to
x86_64-unknown-linux-gnux32. Add target_pointer_width = "64" to the
conditions.
Implement NOOP_METHOD_CALL lint
Implements the beginnings of https://github.com/rust-lang/lang-team/issues/67 - a lint for detecting noop method calls (e.g, calling `<&T as Clone>::clone()` when `T: !Clone`).
This PR does not fully realize the vision and has a few limitations that need to be addressed either before merging or in subsequent PRs:
* [ ] No UFCS support
* [ ] The warning message is pretty plain
* [ ] Doesn't work for `ToOwned`
The implementation uses [`Instance::resolve`](https://doc.rust-lang.org/nightly/nightly-rustc/rustc_middle/ty/instance/struct.Instance.html#method.resolve) which is normally later in the compiler. It seems that there are some invariants that this function relies on that we try our best to respect. For instance, it expects substitutions to have happened, which haven't yet performed, but we check first for `needs_subst` to ensure we're dealing with a monomorphic type.
Thank you to ```@davidtwco,``` ```@Aaron1011,``` and ```@wesleywiser``` for helping me at various points through out this PR ❤️.
Update measureme dependency to the latest version
This version adds the ability to use `rdpmc` hardware-based performance
counters instead of wall-clock time for measuring duration. This also
introduces a dependency on the `perf-event-open-sys` crate on Linux
which is used when using hardware counters.
r? ```@oli-obk```
Skip Ty w/o infer ty/const in trait select
Remove some allocations & also add `skip_current_subtree` to skip subtrees with no inferred items.
r? `@eddyb` since marked in the FIXME
This version adds the ability to use `rdpmc` hardware-based performance
counters instead of wall-clock time for measuring duration. This also
introduces a dependency on the `perf-event-open-sys` crate on Linux
which is used when using hardware counters.
Make the `Query` enum a simple struct.
A lot of code in `rustc_query_system` is generic over it, only to encode an exceptional error case: query cycles.
The delayed computations are now done at cycle detection.
MIR-OPT: Pass to deduplicate blocks
This pass finds basic blocks that are completely equal,
and replaces all uses with just one of them.
```bash
$ RUSTC_LOG=rustc_mir::transform::deduplicate_blocks ./x.py build --stage 2 | grep "SUCCESS: Replacing: " > log
...
$ cat log | wc -l
23875
```
Fix sizes of repr(C) enums on hexagon
Enums on hexagon use a smallest size (but at least 1 byte) that fits all
the enumeration values. This is unlike many other ABIs where enums are
at least 32 bits.
Fixes#82100
Enums on hexagon use a smallest size (but at least 1 byte) that fits all
the enumeration values. This is unlike many other ABIs where enums are
at least 32 bits.
Rollup of 7 pull requests
Successful merges:
- #80595 (`impl PartialEq<Punct> for char`; symmetry for #78636)
- #81991 (Fix panic in 'remove semicolon' when types are not local)
- #82176 (fix MIR fn-ptr pretty-printing)
- #82244 (Keep consistency in example for Stdin StdinLock)
- #82260 (rustc: Show ``@path`` usage in stable)
- #82316 (Fix minor mistake in LTO docs.)
- #82332 (Don't generate src link on dummy spans)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
fix MIR fn-ptr pretty-printing
An uninitialized function pointer would get printed as `{{uninit fn()}` (notice the unbalanced parentheses), and a dangling fn ptr would ICE. This fixes both of that.
However, I have no idea how to add tests for this.
Also, I don't understand this MIR pretty-printing code. Somehow the print function `pretty_print_const_scalar` actually *returns* a transformed form of the const (but there is no doc comment explaining what is being returned); some match arms do `p!` while others do `self =`, and there's a wild mixture of `p!` and `write!`... all very mysterious and confusing.^^
r? ``@oli-obk``
name async generators something more human friendly in type error diagnostic
fixes#81457
Some details:
1. I opted to load the generator kind from the hir in TyCategory. I also use 1 impl in the hir for the descr
2. I named both the source of the future, in addition to the general type (`future`), not sure what is preferred
3. I am not sure what is required to make sure "generator" is not referred to anywhere. A brief `rg "\"generator\"" showed me that most diagnostics correctly distinguish from generators and async generator, but the `descr` of `DefKind` is pretty general (not sure how thats used)
4. should the descr impl of AsyncGeneratorKind use its display impl instead of copying the string?
Print -Ztime-passes (and misc stats/logs) on stderr, not stdout.
I've tried not to change anything that looked similar to `rustc --print`, where people might use automation, and/or any "bulk" prints, such as dumping an entire Graphviz (`dot`) graph on stdout.
The reason I want `-Ztime-passes` to be on stderr like debug logging is I can get a complete (and correctly interleaved) view just by looking at stderr, which is merely a convenience when running `rustc`/Cargo directly, but even more important when it's nested in a build script, as Cargo will split the build script output into stdout (named `output`) and `stderr`.
Ensure valid TraitRefs are created for GATs
This fixes `ProjectionTy::trait_ref` to use the correct substs. Places that need all of the substs have been updated to not use `trait_ref`.
r? ````@jackh726````
Implement RFC 2580: Pointer metadata & VTable
RFC: https://github.com/rust-lang/rfcs/pull/2580
~~Before merging this PR:~~
* [x] Wait for the end of the RFC’s [FCP to merge](https://github.com/rust-lang/rfcs/pull/2580#issuecomment-759145278).
* [x] Open a tracking issue: https://github.com/rust-lang/rust/issues/81513
* [x] Update `#[unstable]` attributes in the PR with the tracking issue number
----
This PR extends the language with a new lang item for the `Pointee` trait which is special-cased in trait resolution to implement it for all types. Even in generic contexts, parameters can be assumed to implement it without a corresponding bound.
For this I mostly imitated what the compiler was already doing for the `DiscriminantKind` trait. I’m very unfamiliar with compiler internals, so careful review is appreciated.
This PR also extends the standard library with new unstable APIs in `core::ptr` and `std::ptr`:
```rust
pub trait Pointee {
/// One of `()`, `usize`, or `DynMetadata<dyn SomeTrait>`
type Metadata: Copy + Send + Sync + Ord + Hash + Unpin;
}
pub trait Thin = Pointee<Metadata = ()>;
pub const fn metadata<T: ?Sized>(ptr: *const T) -> <T as Pointee>::Metadata {}
pub const fn from_raw_parts<T: ?Sized>(*const (), <T as Pointee>::Metadata) -> *const T {}
pub const fn from_raw_parts_mut<T: ?Sized>(*mut (),<T as Pointee>::Metadata) -> *mut T {}
impl<T: ?Sized> NonNull<T> {
pub const fn from_raw_parts(NonNull<()>, <T as Pointee>::Metadata) -> NonNull<T> {}
/// Convenience for `(ptr.cast(), metadata(ptr))`
pub const fn to_raw_parts(self) -> (NonNull<()>, <T as Pointee>::Metadata) {}
}
impl<T: ?Sized> *const T {
pub const fn to_raw_parts(self) -> (*const (), <T as Pointee>::Metadata) {}
}
impl<T: ?Sized> *mut T {
pub const fn to_raw_parts(self) -> (*mut (), <T as Pointee>::Metadata) {}
}
/// `<dyn SomeTrait as Pointee>::Metadata == DynMetadata<dyn SomeTrait>`
pub struct DynMetadata<Dyn: ?Sized> {
// Private pointer to vtable
}
impl<Dyn: ?Sized> DynMetadata<Dyn> {
pub fn size_of(self) -> usize {}
pub fn align_of(self) -> usize {}
pub fn layout(self) -> crate::alloc::Layout {}
}
unsafe impl<Dyn: ?Sized> Send for DynMetadata<Dyn> {}
unsafe impl<Dyn: ?Sized> Sync for DynMetadata<Dyn> {}
impl<Dyn: ?Sized> Debug for DynMetadata<Dyn> {}
impl<Dyn: ?Sized> Unpin for DynMetadata<Dyn> {}
impl<Dyn: ?Sized> Copy for DynMetadata<Dyn> {}
impl<Dyn: ?Sized> Clone for DynMetadata<Dyn> {}
impl<Dyn: ?Sized> Eq for DynMetadata<Dyn> {}
impl<Dyn: ?Sized> PartialEq for DynMetadata<Dyn> {}
impl<Dyn: ?Sized> Ord for DynMetadata<Dyn> {}
impl<Dyn: ?Sized> PartialOrd for DynMetadata<Dyn> {}
impl<Dyn: ?Sized> Hash for DynMetadata<Dyn> {}
```
API differences from the RFC, in areas noted as unresolved questions in the RFC:
* Module-level functions instead of associated `from_raw_parts` functions on `*const T` and `*mut T`, following the precedent of `null`, `slice_from_raw_parts`, etc.
* Added `to_raw_parts`
Only store a LocalDefId in some HIR nodes
Some HIR nodes are guaranteed to be HIR owners: Item, TraitItem, ImplItem, ForeignItem and MacroDef.
As a consequence, we do not need to store the `HirId`'s `local_id`, and we can directly store a `LocalDefId`.
This allows to avoid a bit of the dance with `tcx.hir().local_def_id` and `tcx.hir().local_def_id_to_hir_id` mappings.
avoid full-slicing slices
If we already have a slice, there is no need to get another full-range slice from that, just use the original.
clippy::redundant_slicing
const_generics: Fix incorrect ty::ParamEnv::empty() usage
Fixes#80561
Not sure if I should keep the `debug!(..)`s or not but its the second time I've needed them so they sure seem useful lol
cc ``@lcnr``
r? ``@oli-obk``
const_generics: Dont evaluate array length const when handling errors
Fixes#79518Fixes#78246
cc ````@lcnr````
This was ICE'ing because we dont pass in the correct ``ParamEnv`` which meant that there was no ``Self: Foo`` predicate to make ``Self::Assoc`` well formed which caused an ICE when trying to normalize ``Self::Assoc`` in the mir interpreter
r? ````@varkor````
Suggest to create a new `const` item if the `fn` in the array is a `const fn`
Fixes#73734. If the `fn` in the array repeat expression is a `const fn`, suggest creating a new `const` item. On nightly, suggest creating an inline `const` block. This PR also removes the `suggest_const_in_array_repeat_expressions` as it is no longer necessary.
Example:
```rust
fn main() {
// Should not compile but hint to create a new const item (stable) or an inline const block (nightly)
let strings: [String; 5] = [String::new(); 5];
println!("{:?}", strings);
}
```
Gives this error:
```
error[E0277]: the trait bound `std::string::String: std::marker::Copy` is not satisfied
--> $DIR/const-fn-in-vec.rs:3:32
|
2 | let strings: [String; 5] = [String::new(); 5];
| ^^^^^^^^^^^^^^^^^^ the trait `std::marker::Copy` is not implemented for `String`
|
= note: the `Copy` trait is required because the repeated element will be copied
```
With this change, this is the error message:
```
error[E0277]: the trait bound `String: Copy` is not satisfied
--> $DIR/const-fn-in-vec.rs:3:32
|
LL | let strings: [String; 5] = [String::new(); 5];
| ^^^^^^^^^^^^^^^^^^ the trait `Copy` is not implemented for `String`
|
= help: moving the function call to a new `const` item will resolve the error
```
Check the result cache before the DepGraph when ensuring queries
Split out of https://github.com/rust-lang/rust/pull/70951
Calling `ensure` on already forced queries is a common operation.
Looking at the results cache first is faster than checking the DepGraph for a green node.
Try fast_reject::simplify_type in coherence before doing full check
This is a reattempt at landing #69010 (by `@jonas-schievink).` The change adds a fast path for coherence checking to see if there's no way for types to unify since full coherence checking can be somewhat expensive.
This has big effects on code generated by the [`windows`](https://github.com/microsoft/windows-rs) which in some cases spends as much as 20% of compilation time in the `specialization_graph_of` query. In local benchmarks this took a compilation that previously took ~500 seconds down to ~380 seconds.
This is surely not going to make a difference on much smaller crates, so the question is whether it will have a negative impact. #69010 was closed because some of the perf suite crates did show small regressions.
Additional discussion of this issue is happening [here](https://rust-lang.zulipchat.com/#narrow/stream/247081-t-compiler.2Fperformance/topic/windows-rs.20perf).
Rename HIR UnOp variants
This renames the variants in HIR UnOp from
enum UnOp {
UnDeref,
UnNot,
UnNeg,
}
to
enum UnOp {
Deref,
Not,
Neg,
}
Motivations:
- This is more consistent with the rest of the code base where most enum
variants don't have a prefix.
- These variants are never used without the `UnOp` prefix so the extra
`Un` prefix doesn't help with readability. E.g. we don't have any
`UnDeref`s in the code, we only have `UnOp::UnDeref`.
- MIR `UnOp` type variants don't have a prefix so this is more
consistent with MIR types.
- "un" prefix reads like "inverse" or "reverse", so as a beginner in
rustc code base when I see "UnDeref" what comes to my mind is
something like `&*` instead of just `*`.
This renames the variants in HIR UnOp from
enum UnOp {
UnDeref,
UnNot,
UnNeg,
}
to
enum UnOp {
Deref,
Not,
Neg,
}
Motivations:
- This is more consistent with the rest of the code base where most enum
variants don't have a prefix.
- These variants are never used without the `UnOp` prefix so the extra
`Un` prefix doesn't help with readability. E.g. we don't have any
`UnDeref`s in the code, we only have `UnOp::UnDeref`.
- MIR `UnOp` type variants don't have a prefix so this is more
consistent with MIR types.
- "un" prefix reads like "inverse" or "reverse", so as a beginner in
rustc code base when I see "UnDeref" what comes to my mind is
something like "&*" instead of just "*".
Rollup of 11 pull requests
Successful merges:
- #72209 (Add checking for no_mangle to unsafe_code lint)
- #80732 (Allow Trait inheritance with cycles on associated types take 2)
- #81697 (Add "every" as a doc alias for "all".)
- #81826 (Prefer match over combinators to make some Box methods inlineable)
- #81834 (Resolve typedef in HashMap lldb pretty-printer only if possible)
- #81841 ([rustbuild] Output rustdoc-json-types docs )
- #81849 (Expand the docs for ops::ControlFlow a bit)
- #81876 (parser: Fix panic in 'const impl' recovery)
- #81882 (⬆️ rust-analyzer)
- #81888 (Fix pretty printer macro_rules with semicolon.)
- #81896 (Remove outdated comment in windows' mutex.rs)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Allow Trait inheritance with cycles on associated types take 2
This reverts the revert of #79209 and fixes the ICEs that's occasioned by that PR exposing some problems that are addressed in #80648 and #79811.
For easier review I'd say, check only the last commit, the first one is just a revert of the revert of #79209 which was already approved.
This also could be considered part or the actual fix of #79560 but I guess for that to be closed and fixed completely we would need to land #80648 and #79811 too.
r? `@nikomatsakis`
cc `@Aaron1011`
Improve SIMD type element count validation
Resolvesrust-lang/stdsimd#53.
These changes are motivated by `stdsimd` moving in the direction of const generic vectors, e.g.:
```rust
#[repr(simd)]
struct SimdF32<const N: usize>([f32; N]);
```
This makes a few changes:
* Establishes a maximum SIMD lane count of 2^16 (65536). This value is arbitrary, but attempts to validate lane count before hitting potential errors in the backend. It's not clear what LLVM's maximum lane count is, but cranelift's appears to be much less than `usize::MAX`, at least.
* Expands some SIMD intrinsics to support arbitrary lane counts. This resolves the ICE in the linked issue.
* Attempts to catch invalid-sized vectors during typeck when possible.
Unresolved questions:
* Generic-length vectors can't be validated in typeck and are only validated after monomorphization while computing layout. This "works", but the errors simply bail out with no context beyond the name of the type. Should these errors instead return `LayoutError` or otherwise provide context in some way? As it stands, users of `stdsimd` could trivially produce monomorphization errors by making zero-length vectors.
cc `@bjorn3`
Add lint for `panic!(123)` which is not accepted in Rust 2021.
This extends the `panic_fmt` lint to warn for all cases where the first argument cannot be interpreted as a format string, as will happen in Rust 2021.
It suggests to add `"{}",` to format the message as a string. In the case of `std::panic!()`, it also suggests the recently stabilized
`std::panic::panic_any()` function as an alternative.
It renames the lint to `non_fmt_panic` to match the lint naming guidelines.
This is part of #80162.
r? ```@estebank```
introduce future-compatibility warning for forbidden lint groups
We used to ignore `forbid(group)` scenarios completely. This changed in #78864, but that led to a number of regressions (#80988, #81218).
This PR introduces a future compatibility warning for the case where a group is forbidden but then an individual lint within that group is allowed. We now issue a FCW when we see the "allow", but permit it to take effect.
r? ``@Mark-Simulacrum``
Add a new ABI to support cmse_nonsecure_call
This adds support for the `cmse_nonsecure_call` feature to be able to perform non-secure function call.
See the discussion on Zulip [here](https://rust-lang.zulipchat.com/#narrow/stream/131828-t-compiler/topic/Support.20for.20callsite.20attributes/near/223054928).
This is a followup to #75810 which added `cmse_nonsecure_entry`. As for that PR, I assume that the changes are small enough to not have to go through a RFC but I don't mind doing one if needed 😃
I did not yet create a tracking issue, but if most of it is fine, I can create one and update the various files accordingly (they refer to the other tracking issue now).
On the Zulip chat, I believe `@jonas-schievink` volunteered to be a reviewer 💯
We used to ignore `forbid(group)` scenarios completely. This changed
in #78864, but that led to a number of regressions (#80988, #81218).
This PR introduces a future compatibility warning for the case where
a group is forbidden but then an individual lint within that group
is allowed. We now issue a FCW when we see the "allow", but permit
it to take effect.
Upgrade Chalk
~~Blocked on rust-lang/chalk#670~~
~~Now blocked on rust-lang/chalk#680 and release~~
In addition to the straight upgrade, I also tried to fix some tests by properly returning variables and max universes in the solution. Unfortunately, this actually triggers the same perf problem that rustc traits code runs into in `canonicalizer`. Not sure what the root cause of this problem is, or why it's supposed to be solved in chalk.
r? ```@nikomatsakis```
This commit adds a new ABI to be selected via `extern
"C-cmse-nonsecure-call"` on function pointers in order for the compiler to
apply the corresponding cmse_nonsecure_call callsite attribute.
For Armv8-M targets supporting TrustZone-M, this will perform a
non-secure function call by saving, clearing and calling a non-secure
function pointer using the BLXNS instruction.
See the page on the unstable book for details.
Signed-off-by: Hugues de Valon <hugues.devalon@arm.com>
Remove the remains of query categories
Back in October 2020 in #77830 ``@cjgillot`` removed the query categories information from the profiler, but the actual definitions which query was in which category remained, although unused.
Here I clean that up, to simplify the query definitions even further.
It's unfortunate that this loses all the context for `git blame`, ~~but I'm working on moving those query definitions into `rustc_query_system`, which will lose that context anyway.~~ EDIT: Might not work out.
The functional changes are in the first commit. The second one only changes the indentation.
Add visitors for checking #[inline]
Add visitors for checking #[inline] with struct field
Fix test for #[inline]
Add visitors for checking #[inline] with #[macro_export] macro
Add visitors for checking #[inline] without #[macro_export] macro
Add use alias with Visitor
Fix lint error
Reduce unnecessary variable
Co-authored-by: LingMan <LingMan@users.noreply.github.com>
Change error to warning
Add warning for checking field, arm with #[allow_internal_unstable]
Add name resolver
Formatting
Formatting
Fix error fixture
Add checking field, arm, macro def
Remove const_in_array_repeat
Fixes#80371. Fixes#81315. Fixes#80767. Fixes#75682.
I thought there might be some issue with `Repeats(_, 0)`, but if you increase the items in the array it still ICEs. I'm not sure if this is the best fix but it does fix the given issue.
2229: Fix issues with move closures and mutability
This PR fixes two issues when feature `capture_disjoint_fields` is used.
1. Can't mutate using a mutable reference
2. Move closures try to move value out through a reference.
To do so, we
1. Compute the mutability of the capture and store it as part of the `CapturedPlace` that is written in TypeckResults
2. Restrict capture precision. Note this is temporary for now, to allow the feature to be used with move closures and ByValue captures and might change depending on discussions with the lang team.
- No Derefs are captured for ByValue captures, since that will result in value behind a reference getting moved.
- No projections are applied to raw pointers since these require unsafe blocks. We capture
them completely.
r? `````@nikomatsakis`````
Stabilize `unsigned_abs`
Resolves#74913.
This PR stabilizes the `i*::unsigned_abs()` method, which returns the absolute value of an integer _as its unsigned equivalent_. This has the advantage that it does not overflow on `i*::MIN`.
I have gone ahead and used this in a couple locations throughout the repository.
When `capture_disjoint_fields` is not enabled, checking if the root variable
binding is mutable would suffice.
However with the feature enabled, the captured place might be mutable
because it dereferences a mutable reference.
This PR computes the mutability of each capture after capture analysis
in rustc_typeck. We store this in `ty::CapturedPlace` and then use
`ty::CapturedPlace::mutability` in mir_build and borrow_check.
Refractor a few more types to `rustc_type_ir`
In the continuation of #79169, ~~blocked on that PR~~.
This PR:
- moves `IntVarValue`, `FloatVarValue`, `InferTy` (and friends) and `Variance`
- creates the `IntTy`, `UintTy` and `FloatTy` enums in `rustc_type_ir`, based on their `ast` and `chalk_ir` equilavents, and uses them for types in the rest of the compiler.
~~I will split up that commit to make this easier to review and to have a better commit history.~~
EDIT: done, I split the PR in commits of 200-ish lines each
r? `````@nikomatsakis````` cc `````@jackh726`````
Enforce that query results implement Debug
Currently, we require that query keys implement `Debug`, but we do not do the same for query values. This can make incremental compilation bugs difficult to debug - there isn't a good place to print out the result loaded from disk.
This PR adds `Debug` bounds to several query-related functions, allowing us to debug-print the query value when an 'unstable fingerprint' error occurs. This required adding `#[derive(Debug)]` to a fairly large number of types - hopefully, this doesn't have much of an impact on compiler bootstrapping times.
Prevent query cycles in the MIR inliner
r? `@eddyb` `@wesleywiser`
cc `@rust-lang/wg-mir-opt`
The general design is that we have a new query that is run on the `validated_mir` instead of on the `optimized_mir`. That query is forced before going into the optimization pipeline, so as to not try to read from a stolen MIR.
The query should not be cached cross crate, as you should never call it for items from other crates. By its very design calls into other crates can never cause query cycles.
This is a pessimistic approach to inlining, since we strictly have more calls in the `validated_mir` than we have in `optimized_mir`, but that's not a problem imo.
Various ABI refactorings
This includes changes to the rust abi and various refactorings that will hopefully make it easier to use the abi handling infrastructure of rustc in cg_clif. There are several refactorings that I haven't done. I am opening this draft PR to check that I haven't broken any non x86_64 architectures.
r? `@ghost`
Due to macro expansion, its possible to end up with two distinct
`ExpnId`s that have the same `ExpnData` contents. This violates the
contract of `HashStable`, since two unequal `ExpnId`s will end up with
equal `Fingerprint`s.
This commit adds a `disambiguator` field to `ExpnData`, which is used to
force two otherwise-equivalent `ExpnData`s to be distinct.
Abi::ScalarPair is only ever used for types that don't have a stable
layout anyway so this doesn't break any FFI. It does however reduce the
amount of special casing on the abi outside of the code responsible for
abi specific adjustments to the pass mode.
Improve diagnostics when closure doesn't meet trait bound
Improves the diagnostics when closure doesn't meet trait bound by modifying `TypeckResuts::closure_kind_origins` such that `hir::Place` is used instead of `Symbol`. Using `hir::Place` to describe which capture influenced the decision of selecting a trait a closure satisfies to (Fn/FnMut/FnOnce, Copy) allows us to show precise path in the diagnostics when `capture_disjoint_field` feature is enabled.
Closes rust-lang/project-rfc-2229/issues/21
r? ```@nikomatsakis```
Remove DepKind::CrateMetadata and pre-allocation of DepNodes
Remove much of the special-case handling around crate metadata
dependency tracking by replacing `DepKind::CrateMetadata` and the
pre-allocation of corresponding `DepNodes` with on-demand invocation
of the `crate_hash` query.
Properly handle `SyntaxContext` of dummy spans in incr comp
Fixes#80336
Due to macro expansion, we may end up with spans with an invalid
location and non-root `SyntaxContext`. This commits preserves the
`SyntaxContext` of such spans in the incremental cache, and ensures
that we always hash the `SyntaxContext` when computing the `Fingerprint`
of a `Span`
Previously, we would discard the `SyntaxContext` during serialization to
the incremental cache, causing the span's `Fingerprint` to change across
compilation sessions.
Rework diagnostics for wrong number of generic args (fixes#66228 and #71924)
This PR reworks the `wrong number of {} arguments` message, so that it provides more details and contextual hints.
Fixes#80336
Due to macro expansion, we may end up with spans with an invalid
location and non-root `SyntaxContext`. This commits preserves the
`SyntaxContext` of such spans in the incremental cache, and ensures
that we always hash the `SyntaxContext` when computing the `Fingerprint`
of a `Span`
Previously, we would discard the `SyntaxContext` during serialization to
the incremental cache, causing the span's `Fingerprint` to change across
compilation sessions.
Separate out a `hir::Impl` struct
This makes it possible to pass the `Impl` directly to functions, instead
of having to pass each of the many fields one at a time. It also
simplifies matches in many cases.
See `rustc_save_analysis::dump_visitor::process_impl` or `rustdoc::clean::clean_impl` for a good example of how this makes `impl`s easier to work with.
r? `@petrochenkov` maybe?
This makes it possible to pass the `Impl` directly to functions, instead
of having to pass each of the many fields one at a time. It also
simplifies matches in many cases.
Turn type inhabitedness into a query to fix `exhaustive_patterns` perf
We measured in https://github.com/rust-lang/rust/pull/79394 that enabling the [`exhaustive_patterns` feature](https://github.com/rust-lang/rust/issues/51085) causes significant perf degradation. It was conjectured that the culprit is type inhabitedness checking, and [I hypothesized](https://github.com/rust-lang/rust/pull/79394#issuecomment-733861149) that turning this computation into a query would solve most of the problem.
This PR turns `tcx.is_ty_uninhabited_from` into a query, and I measured a 25% perf gain on the benchmark that stress-tests `exhaustiveness_patterns`. This more than compensates for the 30% perf hit I measured [when creating it](https://github.com/rust-lang/rustc-perf/pull/801). We'll have to measure enabling the feature again, but I suspect this fixes the perf regression entirely.
I'd like a perf run on this PR obviously.
I made small atomic commits to help reviewing. The first one is just me discovering the "revisions" feature of the testing framework.
I believe there's a push to move things out of `rustc_middle` because it's huge. I guess `inhabitedness/mod.rs` could be moved out, but it's quite small. `DefIdForest` might be movable somewhere too. I don't know what the policy is for that.
Ping `@camelid` since you were interested in following along
`@rustbot` modify labels: +A-exhaustiveness-checking
Since `DefIdForest` contains 0 or 1 elements the large majority of the
time, by allocating only in the >1 case we avoid almost all allocations,
compared to `Arc<SmallVec<[DefId;1]>>`. This shaves off 0.2% on the
benchmark that stresses uninhabitedness checking.
Remove much of the special-case handling around crate metadata
dependency tracking by replacing `DepKind::CrateMetadata` and the
pre-allocation of corresponding `DepNodes` with on-demand invocation
of the `crate_hash` query.
Make CTFE able to check for UB...
... by not doing any optimizations on the `const fn` MIR used in CTFE. This means we duplicate all `const fn`'s MIR now, once for CTFE, once for runtime. This PR is for checking the perf effect, so we have some data when talking about https://github.com/rust-lang/const-eval/blob/master/rfcs/0000-const-ub.md
To do this, we now have two queries for obtaining mir: `optimized_mir` and `mir_for_ctfe`. It is now illegal to invoke `optimized_mir` to obtain the MIR of a const/static item's initializer, an array length, an inline const expression or an enum discriminant initializer. For `const fn`, both `optimized_mir` and `mir_for_ctfe` work, the former returning the MIR that LLVM should use if the function is called at runtime. Similarly it is illegal to invoke `mir_for_ctfe` on regular functions.
This is all checked via appropriate assertions and I don't think it is easy to get wrong, as there should be no `mir_for_ctfe` calls outside the const evaluator or metadata encoding. Almost all rustc devs should keep using `optimized_mir` (or `instance_mir` for that matter).
Serialize incr comp structures to file via fixed-size buffer
Reduce a large memory spike that happens during serialization by writing
the incr comp structures to file by way of a fixed-size buffer, rather
than an unbounded vector.
Effort was made to keep the instruction count close to that of the
previous implementation. However, buffered writing to a file inherently
has more overhead than writing to a vector, because each write may
result in a handleable error. To reduce this overhead, arrangements are
made so that each LEB128-encoded integer can be written to the buffer
with only one capacity and error check. Higher-level optimizations in
which entire composite structures can be written with one capacity and
error check are possible, but would require much more work.
The performance is mostly on par with the previous implementation, with
small to moderate instruction count regressions. The memory reduction is
significant, however, so it seems like a worth-while trade-off.
Reduce a large memory spike that happens during serialization by writing
the incr comp structures to file by way of a fixed-size buffer, rather
than an unbounded vector.
Effort was made to keep the instruction count close to that of the
previous implementation. However, buffered writing to a file inherently
has more overhead than writing to a vector, because each write may
result in a handleable error. To reduce this overhead, arrangements are
made so that each LEB128-encoded integer can be written to the buffer
with only one capacity and error check. Higher-level optimizations in
which entire composite structures can be written with one capacity and
error check are possible, but would require much more work.
The performance is mostly on par with the previous implementation, with
small to moderate instruction count regressions. The memory reduction is
significant, however, so it seems like a worth-while trade-off.
Access query (DepKind) metadata through fields
This refactors the access to query definition metadata (attributes such as eval always, anon, has_params) and loading/forcing functions to generate a number of structs, instead of matching on the DepKind enum. This makes access to the fields cheaper to compile. Using a struct means that finding the metadata for a given query is just an offset away; previously the match may have been compiled to a jump table but likely not completely inlined as we expect here.
A previous attempt explored a similar strategy, but using trait objects in #78314 that proved less effective, likely due to higher overheads due to forcing dynamic calls and poorer cache utilization (all metadata is fairly densely packed with this PR).
Add check for `[T;N]`/`usize` mismatch in astconv
Helps clarify the issue in #80506
by adding a specific check for mismatches between [T;N] and usize.
r? `@lcnr`
use PlaceRef more consistently instead of loosely coupled local+projection
Instead of working directly with the `projections` array, use `iter_projections` and `last_projection`. This avoids having to construct new `PlaceRef` from the pieces everywhere.
I only did this for a few files, to see how people think about this. If y'all are happy with this, I'll open an E-mentor issue to complete this. I grepped for `Place::ty_from` to find the places that need adjusting -- this could miss some, but I am not sure what else to grep for.
