The information logged here is of limited general interest, while at the
same times makes it impractical to simply enable logging and share the
resulting logs due to the amount of the output produced.
Reduce log level from info to debug for developer oriented information.
For example, when building cargo, this reduces the amount of logs
generated by `RUSTC_LOG=info cargo build` from 265 MB to 79 MB.
Continuation of changes from 81350.
Try fast_reject::simplify_type in coherence before doing full check
This is a reattempt at landing #69010 (by `@jonas-schievink).` The change adds a fast path for coherence checking to see if there's no way for types to unify since full coherence checking can be somewhat expensive.
This has big effects on code generated by the [`windows`](https://github.com/microsoft/windows-rs) which in some cases spends as much as 20% of compilation time in the `specialization_graph_of` query. In local benchmarks this took a compilation that previously took ~500 seconds down to ~380 seconds.
This is surely not going to make a difference on much smaller crates, so the question is whether it will have a negative impact. #69010 was closed because some of the perf suite crates did show small regressions.
Additional discussion of this issue is happening [here](https://rust-lang.zulipchat.com/#narrow/stream/247081-t-compiler.2Fperformance/topic/windows-rs.20perf).
Make suggestion of changing mutability of arguments broader
Fix#81421
Previously rustc tries to emit the suggestion of changing mutablity unless `!trait_ref.has_infer_types_or_consts() && self.predicate_can_apply(obligation.param_env, trait_ref)` and this led to some false negatives to occur.
Reduce log level used by tracing instrumentation from info to debug
Restore log level to debug to avoid make info log level overly verbose (the uses of instrument attribute modified there, were for the most part a replacement for `debug!`; one use was novel).
Allow Trait inheritance with cycles on associated types take 2
This reverts the revert of #79209 and fixes the ICEs that's occasioned by that PR exposing some problems that are addressed in #80648 and #79811.
For easier review I'd say, check only the last commit, the first one is just a revert of the revert of #79209 which was already approved.
This also could be considered part or the actual fix of #79560 but I guess for that to be closed and fixed completely we would need to land #80648 and #79811 too.
r? `@nikomatsakis`
cc `@Aaron1011`
relax adt unsizing requirements
Changes unsizing of structs in case the last struct field shares generic params with other adt fields which do not change.
This change is currently insta stable and changes the language, so it at least requires a lang fcp. I feel like the current state is fairly unintuitive.
An example for what's now allowed would be https://play.rust-lang.org/?version=stable&mode=debug&edition=2018&gist=6dd331d23f5c9ffc8c978175aae2e967
```rust
struct A<T, U: ?Sized>(T, B<T, U>); // previously ERR
// struct A<T, U: ?Sized>(T, B<[u32; 1], U>); // ok
struct B<T, U: ?Sized>(T, U);
fn main() {
let x = A([0; 1], B([0; 1], [0; 1]));
let y: &A<[u32; 1], [u32]> = &x;
assert_eq!(y.1.1.len(), 1);
}
```
Add better diagnostic for unbounded Abst. Const
~~In the case where a generic abst. const requires a trivial where bound: `where TypeWithConst<const_fn(N)>: ,`,
instead of requiring a where bound, just check that only consts are being substituted in to skip over where check.~~
~~This is pretty sketchy, but I think it works. Presumably, if there is checking for type bounds added later, it can first check nested requirements, and see if they're satisfied by the current `ParamEnv`.~~
Changed the diagnostic to add a better example, which is more practical than what was previously proposed.
r? ```@lcnr```
Add error message for private fn
Attempts to add a more detailed error when a `const_evaluatable` fn from another scope is used inside of a scope which cannot access it.
r? ````@lcnr````
Remove const_in_array_repeat
Fixes#80371. Fixes#81315. Fixes#80767. Fixes#75682.
I thought there might be some issue with `Repeats(_, 0)`, but if you increase the items in the array it still ICEs. I'm not sure if this is the best fix but it does fix the given issue.
Stabilize by-value `[T; N]` iterator `core::array::IntoIter`
Tracking issue: https://github.com/rust-lang/rust/issues/65798
This is unblocked now that `min_const_generics` has been stabilized in https://github.com/rust-lang/rust/pull/79135.
This PR does *not* include the corresponding `IntoIterator` impl, which is https://github.com/rust-lang/rust/pull/65819. Instead, an iterator can be constructed through the `new` method.
`new` would become unnecessary when `IntoIterator` is implemented and might be deprecated then, although it will stay stable.
Make hitting the recursion limit in projection non-fatal
This change was originally made in #80246 to avoid future (effectively) infinite loop bugs in projections,
but wundergraph relies on rustc recovering here.
cc #80953
r? `@nikomatsakis`
Refine "remove semicolon" suggestion in trait selection
Don't suggest it if the last statement doesn't have a semicolon
Fixes#81098
See also #54771 for why this suggestion was added
Improve diagnostics when closure doesn't meet trait bound
Improves the diagnostics when closure doesn't meet trait bound by modifying `TypeckResuts::closure_kind_origins` such that `hir::Place` is used instead of `Symbol`. Using `hir::Place` to describe which capture influenced the decision of selecting a trait a closure satisfies to (Fn/FnMut/FnOnce, Copy) allows us to show precise path in the diagnostics when `capture_disjoint_field` feature is enabled.
Closes rust-lang/project-rfc-2229/issues/21
r? ```@nikomatsakis```
Don't try to add nested predicate to Rustdoc auto-trait `ParamEnv`
Fixes#80233
We already have logic in `evaluate_predicates` that tries to add
unimplemented predicates to our `ParamEnv`. Trying to add a predicate
that already holds can lead to errors later on, since projection
will prefer trait candidates from the `ParamEnv` to predicates from an
impl.
Separate out a `hir::Impl` struct
This makes it possible to pass the `Impl` directly to functions, instead
of having to pass each of the many fields one at a time. It also
simplifies matches in many cases.
See `rustc_save_analysis::dump_visitor::process_impl` or `rustdoc::clean::clean_impl` for a good example of how this makes `impl`s easier to work with.
r? `@petrochenkov` maybe?
This makes it possible to pass the `Impl` directly to functions, instead
of having to pass each of the many fields one at a time. It also
simplifies matches in many cases.
Make CTFE able to check for UB...
... by not doing any optimizations on the `const fn` MIR used in CTFE. This means we duplicate all `const fn`'s MIR now, once for CTFE, once for runtime. This PR is for checking the perf effect, so we have some data when talking about https://github.com/rust-lang/const-eval/blob/master/rfcs/0000-const-ub.md
To do this, we now have two queries for obtaining mir: `optimized_mir` and `mir_for_ctfe`. It is now illegal to invoke `optimized_mir` to obtain the MIR of a const/static item's initializer, an array length, an inline const expression or an enum discriminant initializer. For `const fn`, both `optimized_mir` and `mir_for_ctfe` work, the former returning the MIR that LLVM should use if the function is called at runtime. Similarly it is illegal to invoke `mir_for_ctfe` on regular functions.
This is all checked via appropriate assertions and I don't think it is easy to get wrong, as there should be no `mir_for_ctfe` calls outside the const evaluator or metadata encoding. Almost all rustc devs should keep using `optimized_mir` (or `instance_mir` for that matter).
remove unused return type of dropck::check_drop_obligations()
don't wrap return type in Option in get_macro_by_def_id() since we would always return Some(..)
remove redundant return type of back::write::optimize()
don't Option-wrap return type of compute_type_parameters() since we always return Some(..)
don't return empty Result in assemble_generator_candidates()
don't return empty Result in assemble_closure_candidates()
don't return empty result in assemble_fn_pointer_candidates()
don't return empty result in assemble_candidates_from_impls()
don't return empty result in assemble_candidates_from_auto_impls()
don't return emtpy result in assemble_candidates_for_trait_alias()
don't return empty result in assemble_builtin_bound_candidates()
don't return empty results in assemble_extension_candidates_for_traits_in_scope() and assemble_extension_candidates_for_trait()
remove redundant wrapping of return type of StripItem::strip() since it always returns Some(..)
remove unused return type of assemble_extension_candidates_for_all_traits()
Prevent caching normalization results with a cycle
When normalizing a projection which results in a cycle, we would cache the result of `project_type` without the nested obligations (because they're not needed for inference). This would result in the nested obligations only being handled once in fulfill, which would avoid the cycle error. `get_paranoid_cache_value_obligation` used to add an obligation that resulted in a cycle in this case previously, but was removed by #73905.
This PR makes the projection cache not cache the value of a projection if it was ever normalized in a cycle (except in a snapshot that's rolled back).
Fixes#79714.
r? `@nikomatsakis`
Fixes#80233
We already have logic in `evaluate_predicates` that tries to add
unimplemented predicates to our `ParamEnv`. Trying to add a predicate
that already holds can lead to errors later on, since projection
will prefer trait candidates from the `ParamEnv` to predicates from an
impl.
When normalizing a projection which results in a cycle, we would
cache the result of `project_type` without the nested obligations
(because they're not needed for inference). This would result in
the nested obligations only being handled once in fulfill, which
would avoid the cycle error.
Fixes#79714, a regresion from #79305 caused by the removal of
`get_paranoid_cache_value_obligation`.
Move binder for dyn to each list item
This essentially changes `ty::Binder<&'tcx List<ExistentialTraitRef>>` to `&'tcx List<ty::Binder<ExistentialTraitRef>>`.
This is a first step in moving the `dyn Trait` representation closer to Chalk, which we've talked about in `@rust-lang/wg-traits.`
r? `@nikomatsakis`
Revert "Auto merge of #79209
r? `@nikomatsakis`
This has caused some issues (#79560) so better to revert and try to come up with a proper fix without rush.
type is too big -> values of the type are too big
strictly speaking, `[u8; usize::MAX]` or even `[[[u128; usize::MAX]; usize::MAX]; usize::MAX]` are absolutely fine types as long as you don't try to deal with any values of it.
This error message seems to cause some confusion imo, for example in https://github.com/rust-lang/rust/pull/79135#issuecomment-729361380 so I would prefer us to be more precise here.
See the added test case which uses one of these types without causing an error.
r? ``@oli-obk``
Introduce `TypeVisitor::BreakTy`
Implements MCP rust-lang/compiler-team#383.
r? `@ghost`
cc `@lcnr` `@oli-obk`
~~Blocked on FCP in rust-lang/compiler-team#383.~~
Allow making `RUSTC_BOOTSTRAP` conditional on the crate name
Motivation: This came up in the [Zulip stream](https://rust-lang.zulipchat.com/#narrow/stream/233931-t-compiler.2Fmajor-changes/topic/Require.20users.20to.20confirm.20they.20know.20RUSTC_.E2.80.A6.20compiler-team.23350/near/208403962) for https://github.com/rust-lang/compiler-team/issues/350.
See also https://github.com/rust-lang/cargo/pull/6608#issuecomment-458546258; this implements https://github.com/rust-lang/cargo/issues/6627.
The goal is for this to eventually allow prohibiting setting `RUSTC_BOOTSTRAP` in build.rs (https://github.com/rust-lang/cargo/issues/7088).
## User-facing changes
- `RUSTC_BOOTSTRAP=1` still works; there is no current plan to remove this.
- Things like `RUSTC_BOOTSTRAP=0` no longer activate nightly features. In practice this shouldn't be a big deal, since `RUSTC_BOOTSTRAP` is the opposite of stable and everyone uses `RUSTC_BOOTSTRAP=1` anyway.
- `RUSTC_BOOTSTRAP=x` will enable nightly features only for crate `x`.
- `RUSTC_BOOTSTRAP=x,y` will enable nightly features only for crates `x` and `y`.
## Implementation changes
The main change is that `UnstableOptions::from_environment` now requires
an (optional) crate name. If the crate name is unknown (`None`), then the new feature is not available and you still have to use `RUSTC_BOOTSTRAP=1`. In practice this means the feature is only available for `--crate-name`, not for `#![crate_name]`; I'm interested in supporting the second but I'm not sure how.
Other major changes:
- Added `Session::is_nightly_build()`, which uses the `crate_name` of
the session
- Added `nightly_options::match_is_nightly_build`, a convenience method
for looking up `--crate-name` from CLI arguments.
`Session::is_nightly_build()`should be preferred where possible, since
it will take into account `#![crate_name]` (I think).
- Added `unstable_features` to `rustdoc::RenderOptions`
I'm not sure whether this counts as T-compiler or T-lang; _technically_ RUSTC_BOOTSTRAP is an implementation detail, but it's been used so much it seems like this counts as a language change too.
r? `@joshtriplett`
cc `@Mark-Simulacrum` `@hsivonen`
look at assoc ct, check the type of nodes
an example where types matter are function objects, see the added test which previously passed.
Now does a shallow comparison of unevaluated constants.
r? ```@oli-obk```
The discussion seems to have resolved that this lint is a bit "noisy" in
that applying it in all places would result in a reduction in
readability.
A few of the trivial functions (like `Path::new`) are fine to leave
outside of closures.
The general rule seems to be that anything that is obviously an
allocation (`Box`, `Vec`, `vec![]`) should be in a closure, even if it
is a 0-sized allocation.
revert #75443, update mir validator
This PR reverts rust-lang#75443 to fix rust-lang#75992 and instead uses rust-lang#75419 to fix rust-lang#75313.
Adapts rust-lang#75419 to correctly deal with unevaluated constants as otherwise some `feature(const_evaluatable_checked)` tests would ICE.
Note that rust-lang#72793 was also fixed by rust-lang#75443, but as that issue only concerns `feature(type_alias_impl_trait)` I deleted that test case for now and would reopen that issue.
rust-lang#75443 may have also allowed some other code to now successfully compile which would make this revert a breaking change after 2 stable versions, but I hope that this is a purely theoretical concern.
See https://rust-lang.zulipchat.com/#narrow/stream/182449-t-compiler.2Fhelp/topic/generator.20upvars/near/214617274 for more reasoning about this.
r? `@nikomatsakis` `@eddyb` `@RalfJung`
The main change is that `UnstableOptions::from_environment` now requires
an (optional) crate name. If the crate name is unknown (`None`), then the new feature is not available and you still have to use `RUSTC_BOOTSTRAP=1`. In practice this means the feature is only available for `--crate-name`, not for `#![crate_name]`; I'm interested in supporting the second but I'm not sure how.
Other major changes:
- Added `Session::is_nightly_build()`, which uses the `crate_name` of
the session
- Added `nightly_options::match_is_nightly_build`, a convenience method
for looking up `--crate-name` from CLI arguments.
`Session::is_nightly_build()`should be preferred where possible, since
it will take into account `#![crate_name]` (I think).
- Added `unstable_features` to `rustdoc::RenderOptions`
There is a user-facing change here: things like `RUSTC_BOOTSTRAP=0` no
longer active nightly features. In practice this shouldn't be a big
deal, since `RUSTC_BOOTSTRAP` is the opposite of stable and everyone
uses `RUSTC_BOOTSTRAP=1` anyway.
- Add tests
Check against `Cheat`, not whether nightly features are allowed.
Nightly features are always allowed on the nightly channel.
- Only call `is_nightly_build()` once within a function
- Use booleans consistently for rustc_incremental
Sessions can't be passed through threads, so `read_file` couldn't take a
session. To be consistent, also take a boolean in `write_file_header`.
check object safety of generic constants
As `Self` can only be effectively used in constants with `const_evaluatable_checked` this should not matter outside of it.
Implements the first item of #72219
> Object safety interactions with constants
r? @oli-obk for now cc @nikomatsakis
Tweak match arm semicolon removal suggestion to account for futures
* Tweak and extend "use `.await`" suggestions
* Suggest removal of semicolon on prior match arm
* Account for `impl Future` when suggesting semicolon removal
* Silence some errors when encountering `await foo()?` as can't be certain what the intent was
*Thanks to https://twitter.com/a_hoverbear/status/1318960787105353728 for pointing this out!*
Cycles in normalization can cause evaluations to change from Unknown to
Err. This means that some selection that were applicable no longer are.
To avoid this:
* Selection candidates that are known to be applicable are prefered
over candidates that are not.
* We don't ICE if a candidate is no longer applicable.
Trait predicate ambiguities are not always in `Self`
When reporting ambiguities in trait predicates, the compiler incorrectly assumed the ambiguity was always in the type the trait should be implemented on, and never the generic parameters of the trait. This caused silly suggestions for predicates like `<KnownType as Trait<_>>`, such as giving explicit types to completely unrelated variables that happened to be of type `KnownType`.
This also reverts #73027, which worked around this issue in some cases and does not appear to be necessary any more.
fixes#77982fixes#78055
Try to make ObligationForest more efficient
This PR tries to decrease the number of allocations in ObligationForest, as well as moves some cold path code to an uninlined function.
