Warn (or error) when `Self` ctor from outer item is referenced in inner nested item
This implements a warning `SELF_CONSTRUCTOR_FROM_OUTER_ITEM` when a self constructor from an outer impl is referenced in an inner nested item. This is a proper fix mentioned https://github.com/rust-lang/rust/pull/117246#discussion_r1374648388.
This warning is additionally bumped to a hard error when the self type references generic parameters, since it's almost always going to ICE, and is basically *never* correct to do.
This also reverts part of https://github.com/rust-lang/rust/pull/117246, since I believe this is the proper fix and we shouldn't need the helper functions (`opt_param_at`/`opt_type_param`) any longer, since they shouldn't really ever be used in cases where we don't have this problem.
Change leak check and suspicious auto trait lint warning messages
The leak check lint message "this was previously accepted by the compiler but is being phased out; it will become a hard error in a future release!" is misleading as some cases may not be phased out and could end being accepted. This is under discussion still.
The suspicious auto trait lint the change in behavior already happened, so the new message is probably more accurate.
r? `@lcnr`
Closes#93367
Extend Level API
I need this API for https://github.com/rust-lang/rust-clippy/pull/12303: I have a nested `cfg` attribute (so a `MetaItem`) and I'd like to still be able to match against all possible kind of `Level`s.
Invert diagnostic lints.
That is, change `diagnostic_outside_of_impl` and `untranslatable_diagnostic` from `allow` to `deny`, because more than half of the compiler has been converted to use translated diagnostics.
This commit removes more `deny` attributes than it adds `allow` attributes, which proves that this change is warranted.
r? ````@davidtwco````
That is, change `diagnostic_outside_of_impl` and
`untranslatable_diagnostic` from `allow` to `deny`, because more than
half of the compiler has be converted to use translated diagnostics.
This commit removes more `deny` attributes than it adds `allow`
attributes, which proves that this change is warranted.
Replace a number of FxHashMaps/Sets with stable-iteration-order alternatives
This PR replaces almost all of the remaining `FxHashMap`s in query results with either `FxIndexMap` or `UnordMap`. The only case that is missing is the `EffectiveVisibilities` struct which turned out to not be straightforward to transform. Once that is done too, we can remove the `HashStable` implementation from `HashMap`.
The first commit adds the `StableCompare` trait which is a companion trait to `StableOrd`. Some types like `Symbol` can be compared in a cross-session stable way, but their `Ord` implementation is not stable. In such cases, a `StableCompare` implementation can be provided to offer a lightweight way for stable sorting. The more heavyweight option is to sort via `ToStableHashKey`, but then sorting needs to have access to a stable hashing context and `ToStableHashKey` can also be expensive as in the case of `Symbol` where it has to allocate a `String`.
The rest of the commits are rather mechanical and don't overlap, so they are best reviewed individually.
Part of [MCP 533](https://github.com/rust-lang/compiler-team/issues/533).
StableCompare is a companion trait to `StableOrd`. Some types like `Symbol` can be compared in a cross-session stable way, but their `Ord` implementation is not stable. In such cases, a `StableOrd` implementation can be provided to offer a lightweight way for stable sorting. (The more heavyweight option is to sort via `ToStableHashKey`, but then sorting needs to have access to a stable hashing context and `ToStableHashKey` can also be expensive as in the case of `Symbol` where it has to allocate a `String`.)
Clarify how to choose a FutureIncompatibilityReason variant.
There has been some confusion about how to choose these variants, or what the procedure is for handling future-incompatible errors. Hopefully this helps provide some more information on how these work.
compile-time evaluation: detect writes through immutable pointers
This has two motivations:
- it unblocks https://github.com/rust-lang/rust/pull/116745 (and therefore takes a big step towards `const_mut_refs` stabilization), because we can now detect if the memory that we find in `const` can be interned as "immutable"
- it would detect the UB that was uncovered in https://github.com/rust-lang/rust/pull/117905, which was caused by accidental stabilization of `copy` functions in `const` that can only be called with UB
When UB is detected, we emit a future-compat warn-by-default lint. This is not a breaking change, so completely in line with [the const-UB RFC](https://rust-lang.github.io/rfcs/3016-const-ub.html), meaning we don't need t-lang FCP here. I made the lint immediately show up for dependencies since it is nearly impossible to even trigger this lint without `const_mut_refs` -- the accidentally stabilized `copy` functions are the only way this can happen, so the crates that popped up in #117905 are the only causes of such UB (in the code that crater covers), and the three cases of UB that we know about have all been fixed in their respective crates already.
The way this is implemented is by making use of the fact that our interpreter is already generic over the notion of provenance. For CTFE we now use the new `CtfeProvenance` type which is conceptually an `AllocId` plus a boolean `immutable` flag (but packed for a more efficient representation). This means we can mark a pointer as immutable when it is created as a shared reference. The flag will be propagated to all pointers derived from this one. We can then check the immutable flag on each write to reject writes through immutable pointers.
I just hope perf works out.
There has been some confusion about how to choose these variants, or
what the procedure is for handling future-incompatible errors. Hopefully
this helps provide some more information on how these work.
patterns: reject raw pointers that are not just integers
Matching against `0 as *const i32` is fine, matching against `&42 as *const i32` is not.
This extends the existing check against function pointers and wide pointers: we now uniformly reject all these pointer types during valtree construction, and then later lint because of that. See [here](https://github.com/rust-lang/rust/pull/116930#issuecomment-1784654073) for some more explanation and context.
Also fixes https://github.com/rust-lang/rust/issues/116929.
Cc `@oli-obk` `@lcnr`
They've been deprecated for four years.
This commit includes the following changes.
- It eliminates the `rustc_plugin_impl` crate.
- It changes the language used for lints in
`compiler/rustc_driver_impl/src/lib.rs` and
`compiler/rustc_lint/src/context.rs`. External lints are now called
"loaded" lints, rather than "plugins" to avoid confusion with the old
plugins. This only has a tiny effect on the output of `-W help`.
- E0457 and E0498 are no longer used.
- E0463 is narrowed, now only relating to unfound crates, not plugins.
- The `plugin` feature was moved from "active" to "removed".
- It removes the entire plugins chapter from the unstable book.
- It removes quite a few tests, mostly all of those in
`tests/ui-fulldeps/plugin/`.
Closes#29597.
- Sort dependencies and features sections.
- Add `tidy` markers to the sorted sections so they stay sorted.
- Remove empty `[lib`] sections.
- Remove "See more keys..." comments.
Excluded files:
- rustc_codegen_{cranelift,gcc}, because they're external.
- rustc_lexer, because it has external use.
- stable_mir, because it has external use.
Lint `non_exhaustive_omitted_patterns` by columns
This is a rework of the `non_exhaustive_omitted_patterns` lint to make it more consistent. The intent of the lint is to help consumers of `non_exhaustive` enums ensure they stay up-to-date with all upstream variants. This rewrite fixes two cases we didn't handle well before:
First, because of details of exhaustiveness checking, the following wouldn't lint `Enum::C` as missing:
```rust
match Some(x) {
Some(Enum::A) => {}
Some(Enum::B) => {}
_ => {}
}
```
Second, because of the fundamental workings of exhaustiveness checking, the following would treat the `true` and `false` cases separately and thus lint about missing variants:
```rust
match (true, x) {
(true, Enum::A) => {}
(true, Enum::B) => {}
(false, Enum::C) => {}
_ => {}
}
```
Moreover, it would correctly not lint in the case where the pair is flipped, because of asymmetry in how exhaustiveness checking proceeds.
A drawback is that it no longer makes sense to set the lint level per-arm. This will silently break the lint for current users of it (but it's behind a feature gate so that's ok).
The new approach is now independent of the exhaustiveness algorithm; it's a separate pass that looks at patterns column by column. This is another of the motivations for this: I'm glad to move it out of the algorithm, it was akward there.
This PR is almost identical to https://github.com/rust-lang/rust/pull/111651. cc `@eholk` who reviewed it at the time. Compared to then, I'm more confident this is the right approach.
Stabilize `async fn` and return-position `impl Trait` in trait
# Stabilization report
This report proposes the stabilization of `#![feature(return_position_impl_trait_in_trait)]` ([RPITIT][RFC 3425]) and `#![feature(async_fn_in_trait)]` ([AFIT][RFC 3185]). These are both long awaited features that increase the expressiveness of the Rust language and trait system.
Closes#91611
[RFC 3185]: https://rust-lang.github.io/rfcs/3185-static-async-fn-in-trait.html
[RFC 3425]: https://rust-lang.github.io/rfcs/3425-return-position-impl-trait-in-traits.html
## Updates from thread
The thread has covered two major concerns:
* [Given that we don't have RTN, what should we stabilize?](https://github.com/rust-lang/rust/pull/115822#issuecomment-1731149475) -- proposed resolution is [adding a lint](https://github.com/rust-lang/rust/pull/115822#issuecomment-1728354622) and [careful messaging](https://github.com/rust-lang/rust/pull/115822#issuecomment-1731136169)
* [Interaction between outlives bounds and capture semantics](https://github.com/rust-lang/rust/pull/115822#issuecomment-1731153952) -- This is fixable in a forwards-compatible way via #116040, and also eventually via ATPIT.
## Stabilization Summary
This stabilization allows the following examples to work.
### Example of return-position `impl Trait` in trait definition
```rust
trait Bar {
fn bar(self) -> impl Send;
}
```
This declares a trait method that returns *some* type that implements `Send`. It's similar to writing the following using an associated type, except that the associated type is anonymous.
```rust
trait Bar {
type _0: Send;
fn bar(self) -> Self::_0;
}
```
### Example of return-position `impl Trait` in trait implementation
```rust
impl Bar for () {
fn bar(self) -> impl Send {}
}
```
This defines a method implementation that returns an opaque type, just like [RPIT][RFC 1522] does, except that all in-scope lifetimes are captured in the opaque type (as is already true for `async fn` and as is expected to be true for RPIT in Rust Edition 2024), as described below.
[RFC 1522]: https://rust-lang.github.io/rfcs/1522-conservative-impl-trait.html
### Example of `async fn` in trait
```rust
trait Bar {
async fn bar(self);
}
impl Bar for () {
async fn bar(self) {}
}
```
This declares a trait method that returns *some* [`Future`](https://doc.rust-lang.org/core/future/trait.Future.html) and a corresponding method implementation. This is equivalent to writing the following using RPITIT.
```rust
use core::future::Future;
trait Bar {
fn bar(self) -> impl Future<Output = ()>;
}
impl Bar for () {
fn bar(self) -> impl Future<Output = ()> { async {} }
}
```
The desirability of this desugaring being available is part of why RPITIT and AFIT are being proposed for stabilization at the same time.
## Motivation
Long ago, Rust added [RPIT][RFC 1522] and [`async`/`await`][RFC 2394]. These are major features that are widely used in the ecosystem. However, until now, these feature could not be used in *traits* and trait implementations. This left traits as a kind of second-class citizen of the language. This stabilization fixes that.
[RFC 2394]: https://rust-lang.github.io/rfcs/2394-async_await.html
### `async fn` in trait
Async/await allows users to write asynchronous code much easier than they could before. However, it doesn't play nice with other core language features that make Rust the great language it is, like traits. Support for `async fn` in traits has been long anticipated and was not added before due to limitations in the compiler that have now been lifted.
`async fn` in traits will unblock a lot of work in the ecosystem and the standard library. It is not currently possible to write a trait that is implemented using `async fn`. The workarounds that exist are undesirable because they require allocation and dynamic dispatch, and any trait that uses them will become obsolete once native `async fn` in trait is stabilized.
We also have ample evidence that there is demand for this feature from the [`async-trait` crate][async-trait], which emulates the feature using dynamic dispatch. The async-trait crate is currently the #5 async crate on crates.io ranked by recent downloads, receiving over 78M all-time downloads. According to a [recent analysis][async-trait-analysis], 4% of all crates use the `#[async_trait]` macro it provides, representing 7% of all function and method signatures in trait definitions on crates.io. We think this is a *lower bound* on demand for the feature, because users are unlikely to use `#[async_trait]` on public traits on crates.io for the reasons already given.
[async-trait]: https://crates.io/crates/async-trait
[async-trait-analysis]: https://rust-lang.zulipchat.com/#narrow/stream/315482-t-compiler.2Fetc.2Fopaque-types/topic/RPIT.20capture.20rules.20.28capturing.20everything.29/near/389496292
### Return-position `impl Trait` in trait
`async fn` always desugars to a function that returns `impl Future`.
```rust!
async fn foo() -> i32 { 100 }
// Equivalent to:
fn foo() -> impl Future<Output = i32> { async { 100 } }
```
All `async fn`s today can be rewritten this way. This is useful because it allows adding behavior that runs at the time of the function call, before the first `.await` on the returned future.
In the spirit of supporting the same set of features on `async fn` in traits that we do outside of traits, it makes sense to stabilize this as well. As described by the [RPITIT RFC][rpitit-rfc], this includes the ability to mix and match the equivalent forms in traits and their corresponding impls:
```rust!
trait Foo {
async fn foo(self) -> i32;
}
// Can be implemented as:
impl Foo for MyType {
fn foo(self) -> impl Future<Output = i32> {
async { 100 }
}
}
```
Return-position `impl Trait` in trait is useful for cases beyond async, just as regular RPIT is. As a simple example, the RFC showed an alternative way of writing the `IntoIterator` trait with one fewer associated type.
```rust!
trait NewIntoIterator {
type Item;
fn new_into_iter(self) -> impl Iterator<Item = Self::Item>;
}
impl<T> NewIntoIterator for Vec<T> {
type Item = T;
fn new_into_iter(self) -> impl Iterator<Item = T> {
self.into_iter()
}
}
```
[rpitit-rfc]: https://rust-lang.github.io/rfcs/3425-return-position-impl-trait-in-traits.html
## Major design decisions
This section describes the major design decisions that were reached after the RFC was accepted:
- EDIT: Lint against async fn in trait definitions
- Until the [send bound problem](https://smallcultfollowing.com/babysteps/blog/2023/02/01/async-trait-send-bounds-part-1-intro/) is resolved, the use of `async fn` in trait definitions could lead to a bad experience for people using work-stealing executors (by far the most popular choice). However, there are significant use cases for which the current support is all that is needed (single-threaded executors, such as those used in embedded use cases, as well as thread-per-core setups). We are prioritizing serving users well over protecting people from misuse, and therefore, we opt to stabilize the full range of functionality; however, to help steer people correctly, we are will issue a warning on the use of `async fn` in trait definitions that advises users about the limitations. (See [this summary comment](https://github.com/rust-lang/rust/pull/115822#issuecomment-1731149475) for the details of the concern, and [this comment](https://github.com/rust-lang/rust/pull/115822#issuecomment-1728354622) for more details about the reasoning that led to this conclusion.)
- Capture rules:
- The RFC's initial capture rules for lifetimes in impls/traits were found to be imprecisely precise and to introduce various inconsistencies. After much discussion, the decision was reached to make `-> impl Trait` in traits/impls capture *all* in-scope parameters, including both lifetimes and types. This is a departure from the behavior of RPITs in other contexts; an RFC is currently being authored to change the behavior of RPITs in other contexts in a future edition.
- Major discussion links:
- [Lang team design meeting from 2023-07-26](https://hackmd.io/sFaSIMJOQcuwCdnUvCxtuQ?view)
- Refinement:
- The [refinement RFC] initially proposed that impl signatures that are more specific than their trait are not allowed unless the `#[refine]` attribute was included, but left it as an open question how to implement this. The stabilized proposal is that it is not a hard error to omit `#[refine]`, but there is a lint which fires if the impl's return type is more precise than the trait. This greatly simplified the desugaring and implementation while still achieving the original goal of ensuring that users do not accidentally commit to a more specific return type than they intended.
- Major discussion links:
- [Zulip thread](https://rust-lang.zulipchat.com/#narrow/stream/213817-t-lang/topic/.60.23.5Brefine.5D.60.20as.20a.20lint)
[refinement RFC]: https://rust-lang.github.io/rfcs/3245-refined-impls.html
## What is stabilized
### Async functions in traits and trait implementations
* `async fn` are now supported in traits and trait implementations.
* Associated functions in traits that are `async` may have default bodies.
### Return-position impl trait in traits and trait implementations
* Return-position `impl Trait`s are now supported in traits and trait implementations.
* Return-position `impl Trait` in implementations are treated like regular return-position `impl Trait`s, and therefore behave according to the same inference rules for hidden type inference and well-formedness.
* Associated functions in traits that name return-position `impl Trait`s may have default bodies.
* Implementations may provide either concrete types or `impl Trait` for each corresponding `impl Trait` in the trait method signature.
For a detailed exploration of the technical implementation of return-position `impl Trait` in traits, see [the dev guide](https://rustc-dev-guide.rust-lang.org/return-position-impl-trait-in-trait.html).
### Mixing `async fn` in trait and return-position `impl Trait` in trait
A trait function declaration that is `async fn ..() -> T` may be satisfied by an implementation function that returns `impl Future<Output = T>`, or vice versa.
```rust
trait Async {
async fn hello();
}
impl Async for () {
fn hello() -> impl Future<Output = ()> {
async {}
}
}
trait RPIT {
fn hello() -> impl Future<Output = String>;
}
impl RPIT for () {
async fn hello() -> String {
"hello".to_string()
}
}
```
### Return-position `impl Trait` in traits and trait implementations capture all in-scope lifetimes
Described above in "major design decisions".
### Return-position `impl Trait` in traits are "always revealing"
When a trait uses `-> impl Trait` in return position, it logically desugars to an associated type that represents the return (the actual implementation in the compiler is different, as described below). The value of this associated type is determined by the actual return type written in the impl; if the impl also uses `-> impl Trait` as the return type, then the value of the associated type is an opaque type scoped to the impl method (similar to what you would get when calling an inherent function returning `-> impl Trait`). As with any associated type, the value of this special associated type can be revealed by the compiler if the compiler can figure out what impl is being used.
For example, given this trait:
```rust
trait AsDebug {
fn as_debug(&self) -> impl Debug;
}
```
A function working with the trait generically is only able to see that the return value is `Debug`:
```rust
fn foo<T: AsDebug>(t: &T) {
let u = t.as_debug();
println!("{}", u); // ERROR: `u` is not known to implement `Display`
}
```
But if a function calls `as_debug` on a known type (say, `u32`), it may be able to resolve the return type more specifically, if that implementation specifies a concrete type as well:
```rust
impl AsDebug for u32 {
fn as_debug(&self) -> u32 {
*self
}
}
fn foo(t: &u32) {
let u: u32 = t.as_debug(); // OK!
println!("{}", t.as_debug()); // ALSO OK (since `u32: Display`).
}
```
The return type used in the impl therefore represents a **semver binding** promise from the impl author that the return type of `<u32 as AsDebug>::as_debug` will not change. This could come as a surprise to users, who might expect that they are free to change the return type to any other type that implements `Debug`. To address this, we include a [`refining_impl_trait` lint](https://github.com/rust-lang/rust/pull/115582) that warns if the impl uses a specific type -- the `impl AsDebug for u32` above, for example, would toggle the lint.
The lint message explains what is going on and encourages users to `allow` the lint to indicate that they meant to refine the return type:
```rust
impl AsDebug for u32 {
#[allow(refining_impl_trait)]
fn as_debug(&self) -> u32 {
*self
}
}
```
[RFC #3245](https://github.com/rust-lang/rfcs/pull/3245) proposed a new attribute, `#[refine]`, that could also be used to "opt-in" to refinements like this (and which would then silence the lint). That RFC is not currently implemented -- the `#[refine]` attribute is also expected to reveal other details from the signature and has not yet been fully implemented.
### Return-position `impl Trait` and `async fn` in traits are opted-out of object safety checks when the parent function has `Self: Sized`
```rust
trait IsObjectSafe {
fn rpit() -> impl Sized where Self: Sized;
async fn afit() where Self: Sized;
}
```
Traits that mention return-position `impl Trait` or `async fn` in trait when the associated function includes a `Self: Sized` bound will remain object safe. That is because the associated function that defines them will be opted-out of the vtable of the trait, and the associated types will be unnameable from any trait object.
This can alternatively be seen as a consequence of https://github.com/rust-lang/rust/pull/112319#issue-1742251747 and the desugaring of return-position `impl Trait` in traits to associated types which inherit the where-clauses of the associated function that defines them.
## What isn't stabilized (aka, potential future work)
### Dynamic dispatch
As stabilized, traits containing RPITIT and AFIT are **not dyn compatible**. This means that you cannot create `dyn Trait` objects from them and can only use static dispatch. The reason for this limitation is that dynamic dispatch support for RPITIT and AFIT is more complex than static dispatch, as described on the [async fundamentals page](https://rust-lang.github.io/async-fundamentals-initiative/evaluation/challenges/dyn_traits.html). The primary challenge to using `dyn Trait` in today's Rust is that **`dyn Trait` today must list the values of all associated types**. This means you would have to write `dyn for<'s> Trait<Foo<'s> = XXX>` where `XXX` is the future type defined by the impl, such as `F_A`. This is not only verbose (or impossible), it also uniquely ties the `dyn Trait` to a particular impl, defeating the whole point of `dyn Trait`.
The precise design for handling dynamic dispatch is not yet determined. Top candidates include:
- [callee site selection][], in which we permit unsized return values so that the return type for an `-> impl Foo` method be can be `dyn Foo`, but then users must specify the type of wide pointer at the call-site in some fashion.
- [`dyn*`][], where we create a built-in encapsulation of a "wide pointer" and map the associated type corresponding to an RPITIT to the corresponding `dyn*` type (`dyn*` itself is not exposed to users as a type in this proposal, though that could be a future extension).
[callee site selection]: https://smallcultfollowing.com/babysteps/blog/2022/09/21/dyn-async-traits-part-9-callee-site-selection/
[`dyn*`]: https://smallcultfollowing.com/babysteps/blog/2022/03/29/dyn-can-we-make-dyn-sized/
### Where-clause bounds on return-position `impl Trait` in traits or async futures (RTN/ART)
One limitation of async fn in traits and RPITIT as stabilized is that there is no way for users to write code that adds additional bounds beyond those listed in the `-> impl Trait`. The most common example is wanting to write a generic function that requires that the future returned from an `async fn` be `Send`:
```rust
trait Greet {
async fn greet(&self);
}
fn greet_in_parallel<G: Greet>(g: &G) {
runtime::spawn(async move {
g.greet().await; //~ ERROR: future returned by `greet` may not be `Send`
})
}
```
Currently, since the associated types added for the return type are anonymous, there is no where-clause that could be added to make this code compile.
There have been various proposals for how to address this problem (e.g., [return type notation][rtn] or having an annotation to give a name to the associated type), but we leave the selection of one of those mechanisms to future work.
[rtn]: https://smallcultfollowing.com/babysteps/blog/2023/02/13/return-type-notation-send-bounds-part-2/
In the meantime, there are workarounds that one can use to address this problem, listed below.
#### Require all futures to be `Send`
For many users, the trait may only ever be used with `Send` futures, in which case one can write an explicit `impl Future + Send`:
```rust
trait Greet {
fn greet(&self) -> impl Future<Output = ()> + Send;
}
```
The nice thing about this is that it is still compatible with using `async fn` in the trait impl. In the async working group case studies, we found that this could work for the [builder provider API](https://rust-lang.github.io/async-fundamentals-initiative/evaluation/case-studies/builder-provider-api.html). This is also the default approach used by the `#[async_trait]` crate which, as we have noted, has seen widespread adoption.
#### Avoid generics
This problem only applies when the `Self` type is generic. If the `Self` type is known, then the precise return type from an `async fn` is revealed, and the `Send` bound can be inferred thanks to auto-trait leakage. Even in cases where generics may appear to be required, it is sometimes possible to rewrite the code to avoid them. The [socket handler refactor](https://rust-lang.github.io/async-fundamentals-initiative/evaluation/case-studies/socket-handler.html) case study provides one such example.
### Unify capture behavior for `-> impl Trait` in inherent methods and traits
As stabilized, the capture behavior for `-> impl Trait` in a trait (whether as part of an async fn or a RPITIT) captures all types and lifetimes, whereas the existing behavior for inherent methods only captures types and lifetimes that are explicitly referenced. Capturing all lifetimes in traits was necessary to avoid various surprising inconsistencies; the expressed intent of the lang team is to extend that behavior so that we also capture all lifetimes in inherent methods, which would create more consistency and also address a common source of user confusion, but that will have to happen over the 2024 edition. The RFC is in progress. Should we opt not to accept that RFC, we can bring the capture behavior for `-> impl Trait` into alignment in other ways as part of the 2024 edition.
### `impl_trait_projections`
Orthgonal to `async_fn_in_trait` and `return_position_impl_trait_in_trait`, since it can be triggered on stable code. This will be stabilized separately in [#115659](https://github.com/rust-lang/rust/pull/115659).
<details>
If we try to write this code without `impl_trait_projections`, we will get an error:
```rust
#![feature(async_fn_in_trait)]
trait Foo {
type Error;
async fn foo(&mut self) -> Result<(), Self::Error>;
}
impl<T: Foo> Foo for &mut T {
type Error = T::Error;
async fn foo(&mut self) -> Result<(), Self::Error> {
T::foo(self).await
}
}
```
The error relates to the use of `Self` in a trait impl when the self type has a lifetime. It can be worked around by rewriting the impl not to use `Self`:
```rust
#![feature(async_fn_in_trait)]
trait Foo {
type Error;
async fn foo(&mut self) -> Result<(), Self::Error>;
}
impl<T: Foo> Foo for &mut T {
type Error = T::Error;
async fn foo(&mut self) -> Result<(), <&mut T as Foo>::Error> {
T::foo(self).await
}
}
```
</details>
## Tests
Tests are generally organized between return-position `impl Trait` and `async fn` in trait, when the distinction matters.
* RPITIT: https://github.com/rust-lang/rust/tree/master/tests/ui/impl-trait/in-trait
* AFIT: https://github.com/rust-lang/rust/tree/master/tests/ui/async-await/in-trait
## Remaining bugs and open issues
* #112047: Indirection introduced by `async fn` and return-position `impl Trait` in traits may hide cycles in opaque types, causing overflow errors that can only be discovered by monomorphization.
* #111105 - `async fn` in trait is susceptible to issues with checking auto traits on futures' generators, like regular `async`. This is a manifestation of #110338.
* This was deemed not blocking because fixing it is forwards-compatible, and regular `async` is subject to the same issues.
* #104689: `async fn` and return-position `impl Trait` in trait requires the late-bound lifetimes in a trait and impl function signature to be equal.
* This can be relaxed in the future with a smarter lexical region resolution algorithm.
* #102527: Nesting return-position `impl Trait` in trait deeply may result in slow compile times.
* This has only been reported once, and can be fixed in the future.
* #108362: Inference between return types and generics of a function may have difficulties when there's an `.await`.
* This isn't related to AFIT (https://github.com/rust-lang/rust/issues/108362#issuecomment-1717927918) -- using traits does mean that there's possibly easier ways to hit it.
* #112626: Because `async fn` and return-position `impl Trait` in traits lower to associated types, users may encounter strange behaviors when implementing circularly dependent traits.
* This is not specific to RPITIT, and is a limitation of associated types: https://github.com/rust-lang/rust/issues/112626#issuecomment-1603405105
* **(Nightly)** #108309: `async fn` and return-position `impl Trait` in trait do not support specialization. This was deemed not blocking, since it can be fixed in the future (e.g. #108321) and specialization is a nightly feature.
#### (Nightly) Return type notation bugs
RTN is not being stabilized here, but there are some interesting outstanding bugs. None of them are blockers for AFIT/RPITIT, but I'm noting them for completeness.
<details>
* #109924 is a bug that occurs when a higher-ranked trait bound has both inference variables and associated types. This is pre-existing -- RTN just gives you a more convenient way of producing them. This should be fixed by the new trait solver.
* #109924 is a manifestation of a more general issue with `async` and auto-trait bounds: #110338. RTN does not cause this issue, just allows us to put `Send` bounds on the anonymous futures that we have in traits.
* #112569 is a bug similar to associated type bounds, where nested bounds are not implied correctly.
</details>
## Alternatives
### Do nothing
We could choose not to stabilize these features. Users that can use the `#[async_trait]` macro would continue to do so. Library maintainers would continue to avoid async functions in traits, potentially blocking the stable release of many useful crates.
### Stabilize `impl Trait` in associated type instead
AFIT and RPITIT solve the problem of returning unnameable types from trait methods. It is also possible to solve this by using another unstable feature, `impl Trait` in an associated type. Users would need to define an associated type in both the trait and trait impl:
```rust!
trait Foo {
type Fut<'a>: Future<Output = i32> where Self: 'a;
fn foo(&self) -> Self::Fut<'_>;
}
impl Foo for MyType {
type Fut<'a> where Self: 'a = impl Future<Output = i32>;
fn foo(&self) -> Self::Fut<'_> {
async { 42 }
}
}
```
This also has the advantage of allowing generic code to bound the associated type. However, it is substantially less ergonomic than either `async fn` or `-> impl Future`, and users still expect to be able to use those features in traits. **Even if this feature were stable, we would still want to stabilize AFIT and RPITIT.**
That said, we can have both. `impl Trait` in associated types is desireable because it can be used in existing traits with explicit associated types, among other reasons. We *should* stabilize this feature once it is ready, but that's outside the scope of this proposal.
### Use the old capture semantics for RPITIT
We could choose to make the capture rules for RPITIT consistent with the existing rules for RPIT. However, there was strong consensus in a recent [lang team meeting](https://hackmd.io/sFaSIMJOQcuwCdnUvCxtuQ?view) that we should *change* these rules, and furthermore that new features should adopt the new rules.
This is consistent with the tenet in RFC 3085 of favoring ["Uniform behavior across editions"](https://rust-lang.github.io/rfcs/3085-edition-2021.html#uniform-behavior-across-editions) when possible. It greatly reduces the complexity of the feature by not requiring us to answer, or implement, the design questions that arise out of the interaction between the current capture rules and traits. This reduction in complexity – and eventual technical debt – is exactly in line with the motivation listed in the aforementioned RFC.
### Make refinement a hard error
Refinement (`refining_impl_trait`) is only a concern for library authors, and therefore doesn't really warrant making into a deny-by-default warning or an error.
Additionally, refinement is currently checked via a lint that compares bounds in the `impl Trait`s in the trait and impl syntactically. This is good enough for a warning that can be opted-out, but not if this were a hard error, which would ideally be implemented using fully semantic, implicational logic. This was implemented (#111931), but also is an unnecessary burden on the type system for little pay-off.
## History
- Dec 7, 2021: [RFC #3185: Static async fn in traits](https://rust-lang.github.io/rfcs/3185-static-async-fn-in-trait.html) merged
- Sep 9, 2022: [Initial implementation](https://github.com/rust-lang/rust/pull/101224) of AFIT and RPITIT landed
- Jun 13, 2023: [RFC #3425: Return position `impl Trait` in traits](https://rust-lang.github.io/rfcs/3425-return-position-impl-trait-in-traits.html) merged
<!--These will render pretty when pasted into github-->
Non-exhaustive list of PRs that are particularly relevant to the implementation:
- #101224
- #103491
- #104592
- #108141
- #108319
- #108672
- #112988
- #113182 (later made redundant by #114489)
- #113215
- #114489
- #115467
- #115582
Doc co-authored by `@nikomatsakis,` `@tmandry,` `@traviscross.` Thanks also to `@spastorino,` `@cjgillot` (for changes to opaque captures!), `@oli-obk` for many reviews, and many other contributors and issue-filers. Apologies if I left your name off 😺
const-eval: make misalignment a hard error
It's been a future-incompat error (showing up in cargo's reports) since https://github.com/rust-lang/rust/pull/104616, Rust 1.68, released in March. That should be long enough.
The question for the lang team is simply -- should we move ahead with this, making const-eval alignment failures a hard error? (It turns out some of them accidentally already were hard errors since #104616. But not all so this is still a breaking change. Crater found no regression.)
lint towards rejecting consts in patterns that do not implement PartialEq
I think we definitely don't want to allow such consts, so even while the general plan around structural matching is up in the air, we can start the process of getting non-PartialEq matches out of the ecosystem.
`#[diagnostic::on_unimplemented]` without filters
This commit adds support for a `#[diagnostic::on_unimplemented]` attribute with the following options:
* `message` to customize the primary error message
* `note` to add a customized note message to an error message
* `label` to customize the label part of the error message
The relevant behavior is specified in [RFC-3366](https://rust-lang.github.io/rfcs/3366-diagnostic-attribute-namespace.html)
This commit adds support for a `#[diagnostic::on_unimplemented]`
attribute with the following options:
* `message` to customize the primary error message
* `note` to add a customized note message to an error message
* `label` to customize the label part of the error message
Co-authored-by: León Orell Valerian Liehr <me@fmease.dev>
Co-authored-by: Michael Goulet <michael@errs.io>
It lints against features that are inteded to be internal to the
compiler and standard library. Implements MCP #596.
We allow `internal_features` in the standard library and compiler as those
use many features and this _is_ the standard library from the "internal to the compiler and
standard library" after all.
Marking some features as internal wasn't exactly the most scientific approach, I just marked some
mostly obvious features. While there is a categorization in the macro,
it's not very well upheld (should probably be fixed in another PR).
We always pass `-Ainternal_features` in the testsuite
About 400 UI tests and several other tests use internal features.
Instead of throwing the attribute on each one, just always allow them.
There's nothing wrong with testing internal features^^
Diagnostic namespace
This PR implements the basic infrastructure for accepting the `#[diagnostic]` attribute tool namespace as specified in https://github.com/rust-lang/rfcs/pull/3368. Note: This RFC is not merged yet, but it seems like it will be accepted soon. I open this PR early on to get feedback on the actual implementation as soon as possible. This hopefully enables getting at least the diagnostic namespace to stable rust "soon", so that crates do not need to bump their MSRV if we stabilize actual attributes in this namespace.
This PR only adds infrastructure accept attributes from this namespace, it does not add any specific attribute. Therefore the compiler will emit a lint warning for each attribute that's actually used. This namespace is added behind a feature flag, so it will be only available on a nightly compiler for now.
cc `@estebank` as they've supported me in planing, specifying and implementing this feature.
enable `rust_2018_idioms` lint group for doctests
With this change, `rust_2018_idioms` lint group will be enabled for compiler/libstd doctests.
Resolves#106086Resolves#99144
Signed-off-by: ozkanonur <work@onurozkan.dev>
Fix the ffi_unwind_calls lint documentation
This fixes the [`ffi_unwind_calls`](https://doc.rust-lang.org/nightly/rustc/lints/listing/allowed-by-default.html#ffi-unwind-calls) documentation to show its output correctly. Currently it is showing the text `{{produces}}` which is not how it should look.
This fixes it by not ignoring the example. I'm not sure why it was ignored, as the way the lint currently works it doesn't seem to require external linkage. This also fixes several mistakes in the example:
* There is no `ffi_unwind_calls` feature.
* Denies the lint (which is otherwise allow be default).
* Removes the `mod impl` which is not valid Rust syntax, and doesn't appear to be needed anyways.
The output now looks like:
```
warning: call to foreign function with FFI-unwind ABI
--> lint_example.rs:10:14
|
10 | unsafe { foo(); }
| ^^^^^ call to foreign function with FFI-unwind ABI
|
note: the lint level is defined here
--> lint_example.rs:2:9
|
2 | #![warn(ffi_unwind_calls)]
| ^^^^^^^^^^^^^^^^
warning: call to function pointer with FFI-unwind ABI
--> lint_example.rs:12:14
|
12 | unsafe { ptr(); }
| ^^^^^ call to function pointer with FFI-unwind ABI
```
This also includes some updates to the lint-docs tool to help with this issue:
* Adds a check if a lint documentation has `{{produces}}` with an ignored example, and generates an error.
* All instances of a lint are now displayed. Previously it only showed the first time the lint fires. Some examples may trigger a lint multiple times, and they are all now displayed.
Ensure `ptr::read` gets all the same LLVM `load` metadata that dereferencing does
I was looking into `array::IntoIter` optimization, and noticed that it wasn't annotating the loads with `noundef` for simple things like `array::IntoIter<i32, N>`. Trying to narrow it down, it seems that was because `MaybeUninit::assume_init_read` isn't marking the load as initialized (<https://rust.godbolt.org/z/Mxd8TPTnv>), which is unfortunate since that's basically its reason to exist.
The root cause is that `ptr::read` is currently implemented via the *untyped* `copy_nonoverlapping`, and thus the `load` doesn't get any type-aware metadata: no `noundef`, no `!range`. This PR solves that by lowering `ptr::read(p)` to `copy *p` in MIR, for which the backends already do the right thing.
Fortuitiously, this also improves the IR we give to LLVM for things like `mem::replace`, and fixes a couple of long-standing bugs where `ptr::read` on `Copy` types was worse than `*`ing them.
Zulip conversation: <https://rust-lang.zulipchat.com/#narrow/stream/219381-t-libs/topic/Move.20array.3A.3AIntoIter.20to.20ManuallyDrop/near/341189936>
cc `@erikdesjardins` `@JakobDegen` `@workingjubilee` `@the8472`
Fixes#106369Fixes#73258
I was looking into `array::IntoIter` optimization, and noticed that it wasn't annotating the loads with `noundef` for simple things like `array::IntoIter<i32, N>`.
Turned out to be a more general problem as `MaybeUninit::assume_init_read` isn't marking the load as initialized (<https://rust.godbolt.org/z/Mxd8TPTnv>), which is unfortunate since that's basically its reason to exist.
This PR lowers `ptr::read(p)` to `copy *p` in MIR, which fortuitiously also improves the IR we give to LLVM for things like `mem::replace`.
Querify register_tools and post-expansion early lints
The 2 extra queries correspond to code that happen before and after macro expansion, and don't need the resolver to exist.
Currently, deriving on packed structs has some non-trivial limitations,
related to the fact that taking references on unaligned fields is UB.
The current approach to field accesses in derived code:
- Normal case: `&self.0`
- In a packed struct that derives `Copy`: `&{self.0}`
- In a packed struct that doesn't derive `Copy`: `&self.0`
Plus, we disallow deriving any builtin traits other than `Default` for any
packed generic type, because it's possible that there might be
misaligned fields. This is a fairly broad restriction.
Plus, we disallow deriving any builtin traits other than `Default` for most
packed types that don't derive `Copy`. (The exceptions are those where the
alignments inherently satisfy the packing, e.g. in a type with
`repr(packed(N))` where all the fields have alignments of `N` or less
anyway. Such types are pretty strange, because the `packed` attribute is
not having any effect.)
This commit introduces a new, simpler approach to field accesses:
- Normal case: `&self.0`
- In a packed struct: `&{self.0}`
In the latter case, this requires that all fields impl `Copy`, which is
a new restriction. This means that the following example compiles under
the old approach and doesn't compile under the new approach.
```
#[derive(Debug)]
struct NonCopy(u8);
#[derive(Debug)
#[repr(packed)]
struct MyType(NonCopy);
```
(Note that the old approach's support for cases like this was brittle.
Changing the `u8` to a `u16` would be enough to stop it working. So not
much capability is lost here.)
However, the other constraints from the old rules are removed. We can now
derive builtin traits for packed generic structs like this:
```
trait Trait { type A; }
#[derive(Hash)]
#[repr(packed)]
pub struct Foo<T: Trait>(T, T::A);
```
To allow this, we add a `T: Copy` bound in the derived impl and a `T::A:
Copy` bound in where clauses. So `T` and `T::A` must impl `Copy`.
We can now also derive builtin traits for packed structs that don't derive
`Copy`, so long as the fields impl `Copy`:
```
#[derive(Hash)]
#[repr(packed)]
pub struct Foo(u32);
```
This includes types that hand-impl `Copy` rather than deriving it, such as the
following, that show up in winapi-0.2:
```
#[derive(Clone)]
#[repr(packed)]
struct MyType(i32);
impl Copy for MyType {}
```
The new approach is simpler to understand and implement, and it avoids
the need for the `unsafe_derive_on_repr_packed` check.
One exception is required for backwards-compatibility: we allow `[u8]`
fields for now. There is a new lint for this,
`byte_slice_in_packed_struct_with_derive`.
Update wording of invalid_doc_attributes docs.
There was a typo in the original docs for `invalid_doc_attributes`. I felt it could use a little rewording to try to clarify the reasoning for the lint. Also, this adds the future-incompatible notice.
Rollup of 8 pull requests
Successful merges:
- #103418 (Add `SEMICOLON_IN_EXPRESSIONS_FROM_MACROS` to future-incompat report)
- #106113 (llvm-wrapper: adapt for LLVM API change)
- #106144 (Improve the documentation of `black_box`)
- #106578 (Label closure captures/generator locals that make opaque types recursive)
- #106749 (Update cc to 1.0.77)
- #106935 (Fix `SingleUseLifetime` ICE)
- #107015 (Re-enable building rust-analyzer on riscv64)
- #107029 (Add new bootstrap members to triagebot.toml)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Revert "Make PROC_MACRO_DERIVE_RESOLUTION_FALLBACK a hard error"
This reverts commit 7d82cadd97 aka PR #84022
I am doing this to buy us some time with respect to issue #106337 w.r.t. the 1.67 release.
Use UnordMap and UnordSet for id collections (DefIdMap, LocalDefIdMap, etc)
This PR changes the `rustc_data_structures::define_id_collections!` macro to use `UnordMap` and `UnordSet` instead of `FxHashMap` and `FxHashSet`. This should account for a large portion of hash-maps being used in places where they can cause trouble.
The changes required are moderate but non-zero:
- In some places the collections are extracted into sorted vecs.
- There are a few instances where for-loops have been changed to extends.
~~Let's see what the performance impact is. With a bit more refactoring, we might be able to get rid of some of the additional sorting -- but the change set is already big enough. Unless there's a performance impact, I'd like to do further changes in subsequent PRs.~~
Performance does not seem to be negatively affected ([perf-run here](https://github.com/rust-lang/rust/pull/106977#issuecomment-1396776699)).
Part of [MCP 533](https://github.com/rust-lang/compiler-team/issues/533).
r? `@ghost`
make `order_dependent_trait_objects` show up in future-breakage reports
tried to change it to a hard error in #102474 but breaking the more than 1000 dependents of `traitobject` doesn't feel great 😅
This lint has existed since more than 3 years now and the way this is currently implemented is buggy and will break with #102472. imo we should upgrade it to also report for dependencies and maybe also backport this to beta. Then after maybe 2-3 stable versions I would like to finally convert this lint to a hard error.
Rewrite representability
* Improve placement of `Box` in the suggestion
* Multiple items in a cycle emit 1 error instead of an error for each item in the cycle
* Introduce `representability` query to avoid traversing an item every time it is used.
* Also introduce `params_in_repr` query to avoid traversing generic items every time it is used.
Stabilize generic associated types
Closes#44265
r? `@nikomatsakis`
# ⚡ Status of the discussion ⚡
* [x] There have been several serious concerns raised, [summarized here](https://github.com/rust-lang/rust/pull/96709#issuecomment-1129311660).
* [x] There has also been a [deep-dive comment](https://github.com/rust-lang/rust/pull/96709#issuecomment-1167220240) explaining some of the "patterns of code" that are enabled by GATs, based on use-cases posted to this thread or on the tracking issue.
* [x] We have modeled some aspects of GATs in [a-mir-formality](https://github.com/nikomatsakis/a-mir-formality) to give better confidence in how they will be resolved in the future. [You can read a write-up here](https://github.com/rust-lang/types-team/blob/master/minutes/2022-07-08-implied-bounds-and-wf-checking.md).
* [x] The major points of the discussion have been [summarized on the GAT initiative repository](https://rust-lang.github.io/generic-associated-types-initiative/mvp.html).
* [x] [FCP has been proposed](https://github.com/rust-lang/rust/pull/96709#issuecomment-1129311660) and we are awaiting final decisions and discussion amidst the relevant team members.
# Stabilization proposal
This PR proposes the stabilization of `#![feature(generic_associated_types)]`. While there a number of future additions to be made and bugs to be fixed (both discussed below), properly doing these will require significant language design and will ultimately likely be backwards-compatible. Given the overwhelming desire to have some form of generic associated types (GATs) available on stable and the stability of the "simple" uses, stabilizing the current subset of GAT features is almost certainly the correct next step.
Tracking issue: #44265
Initiative: https://rust-lang.github.io/generic-associated-types-initiative/
RFC: https://github.com/rust-lang/rfcs/blob/master/text/1598-generic_associated_types.md
Version: 1.65 (2022-08-22 => beta, 2022-11-03 => stable).
## Motivation
There are a myriad of potential use cases for GATs. Stabilization unblocks probable future language features (e.g. async functions in traits), potential future standard library features (e.g. a `LendingIterator` or some form of `Iterator` with a lifetime generic), and a plethora of user use cases (some of which can be seen just by scrolling through the tracking issue and looking at all the issues linking to it).
There are a myriad of potential use cases for GATs. First, there are many users that have chosen to not use GATs primarily because they are not stable (some of which can be seen just by scrolling through the tracking issue and looking at all the issues linking to it). Second, while language feature desugaring isn't *blocked* on stabilization, it gives more confidence on using the feature. Likewise, library features like `LendingIterator` are not necessarily blocked on stabilization to be implemented unstably; however few, if any, public-facing APIs actually use unstable features.
This feature has a long history of design, discussion, and developement - the RFC was first introduced roughly 6 years ago. While there are still a number of features left to implement and bugs left to fix, it's clear that it's unlikely those will have backwards-incompatibility concerns. Additionally, the bugs that do exist do not strongly impede the most-common use cases.
## What is stabilized
The primary language feature stabilized here is the ability to have generics on associated types, as so. Additionally, where clauses on associated types will now be accepted, regardless if the associated type is generic or not.
```rust
trait ATraitWithGATs {
type Assoc<'a, T> where T: 'a;
}
trait ATraitWithoutGATs<'a, T> {
type Assoc where T: 'a;
}
```
When adding an impl for a trait with generic associated types, the generics for the associated type are copied as well. Note that where clauses are allowed both after the specified type and before the equals sign; however, the latter is a warn-by-default deprecation.
```rust
struct X;
struct Y;
impl ATraitWithGATs for X {
type Assoc<'a, T> = &'a T
where T: 'a;
}
impl ATraitWithGATs for Y {
type Assoc<'a, T>
where T: 'a
= &'a T;
}
```
To use a GAT in a function, generics are specified on the associated type, as if it was a struct or enum. GATs can also be specified in trait bounds:
```rust
fn accepts_gat<'a, T>(t: &'a T) -> T::Assoc<'a, T>
where for<'x> T: ATraitWithGATs<Assoc<'a, T> = &'a T> {
...
}
```
GATs can also appear in trait methods. However, depending on how they are used, they may confer where clauses on the associated type definition. More information can be found [here](https://github.com/rust-lang/rust/issues/87479). Briefly, where clauses are required when those bounds can be proven in the methods that *construct* the GAT or other associated types that use the GAT in the trait. This allows impls to have maximum flexibility in the types defined for the associated type.
To take a relatively simple example:
```rust
trait Iterable {
type Item<'a>;
type Iterator<'a>: Iterator<Item = Self::Item<'a>>;
fn iter<'x>(&'x self) -> Self::Iterator<'x>;
//^ We know that `Self: 'a` for `Iterator<'a>`, so we require that bound on `Iterator`
// `Iterator` uses `Self::Item`, so we also require a `Self: 'a` on `Item` too
}
```
A couple well-explained examples are available in a previous [blog post](https://blog.rust-lang.org/2021/08/03/GATs-stabilization-push.html).
## What isn't stabilized/implemented
### Universal type/const quantification
Currently, you can write a bound like `X: for<'a> Trait<Assoc<'a> = &'a ()>`. However, you cannot currently write `for<T> X: Trait<Assoc<T> = T>` or `for<const N> X: Trait<Assoc<N> = [usize; N]>`.
Here is an example where this is needed:
```rust
trait Foo {}
trait Trait {
type Assoc<F: Foo>;
}
trait Trait2: Sized {
fn foo<F: Foo, T: Trait<Assoc<F> = F>>(_t: T);
}
```
In the above example, the *caller* must specify `F`, which is likely not what is desired.
### Object-safe GATs
Unlike non-generic associated types, traits with GATs are not currently object-safe. In other words the following are not allowed:
```rust
trait Trait {
type Assoc<'a>;
}
fn foo(t: &dyn for<'a> Trait<Assoc<'a> = &'a ()>) {}
//^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ not allowed
let ty: Box<dyn for<'a> Trait<Assoc<'a> = &'a ()>>;
//^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ not allowed
```
### Higher-kinded types
You cannot write currently (and there are no current plans to implement this):
```rust
struct Struct<'a> {}
fn foo(s: for<'a> Struct<'a>) {}
```
## Tests
There are many tests covering GATs that can be found in `src/test/ui/generic-associated-types`. Here, I'll list (in alphanumeric order) tests highlight some important behavior or contain important patterns.
- `./parse/*`: Parsing of GATs in traits and impls, and the trait path with GATs
- `./collections-project-default.rs`: Interaction with associated type defaults
- `./collections.rs`: The `Collection` pattern
- `./const-generics-gat-in-trait-return-type-*.rs`: Const parameters
- `./constraint-assoc-type-suggestion.rs`: Emit correct syntax in suggestion
- `./cross-crate-bounds.rs`: Ensure we handles bounds across crates the same
- `./elided-in-expr-position.rs`: Disallow lifetime elision in return position
- `./gat-in-trait-path-undeclared-lifetime.rs`: Ensure we error on undeclared lifetime in trait path
- `./gat-in-trait-path.rs`: Base trait path case
- `./gat-trait-path-generic-type-arg.rs`: Don't allow shadowing of parameters
- `./gat-trait-path-parenthesised-args.rs`: Don't allow paranthesized args in trait path
- `./generic-associated-types-where.rs`: Ensure that we require where clauses from trait to be met on impl
- `./impl_bounds.rs`: Check that the bounds on GATs in an impl are checked
- `./issue-76826.rs`: `Windows` pattern
- `./issue-78113-lifetime-mismatch-dyn-trait-box.rs`: Implicit 'static diagnostics
- `./issue-84931.rs`: Ensure that we have a where clause on GAT to ensure trait parameter lives long enough
- `./issue-87258_a.rs`: Unconstrained opaque type with TAITs
- `./issue-87429-2.rs`: Ensure we can use bound vars in the bounds
- `./issue-87429-associated-type-default.rs`: Ensure bounds hold with associated type defaults, for both trait and impl
- `./issue-87429-specialization.rs`: Check that bounds hold under specialization
- `./issue-88595.rs`: Under the outlives lint, we require a bound for both trait and GAT lifetime when trait lifetime is used in function
- `./issue-90014.rs`: Lifetime bounds are checked with TAITs
- `./issue-91139.rs`: Under migrate mode, but not NLL, we don't capture implied bounds from HRTB lifetimes used in a function and GATs
- `./issue-91762.rs`: We used to too eagerly pick param env candidates when normalizing with GATs. We now require explicit parameters specified.
- `./issue-95305.rs`: Disallow lifetime elision in trait paths
- `./iterable.rs`: `Iterable` pattern
- `./method-unsatified-assoc-type-predicate.rs`: Print predicates with GATs correctly in method resolve error
- `./missing_lifetime_const.rs`: Ensure we must specify lifetime args (not elidable)
- `./missing-where-clause-on-trait.rs`: Ensure we don't allow stricter bounds on impl than trait
- `./parameter_number_and_kind_impl.rs`: Ensure paramters on GAT in impl match GAT in trait
- `./pointer_family.rs`: `PointerFamily` pattern
- `./projection-bound-cycle.rs`: Don't allow invalid cycles to prove bounds
- `./self-outlives-lint.rs`: Ensures that an e.g. `Self: 'a` is written on the traits GAT if that bound can be implied from the GAT usage in the trait
- `./shadowing.rs`: Don't allow lifetime shadowing in params
- `./streaming_iterator.rs`: `StreamingIterator`(`LendingIterator`) pattern
- `./trait-objects.rs`: Disallow trait objects for traits with GATs
- `./variance_constraints.rs`: Require that GAT substs be invariant
## Remaining bugs and open issues
A full list of remaining open issues can be found at: https://github.com/rust-lang/rust/labels/F-generic_associated_types
There are some `known-bug` tests in-tree at `src/test/ui/generic-associated-types/bugs`.
Here I'll categorize most of those that GAT bugs (or involve a pattern found more with GATs), but not those that include GATs but not a GAT issue in and of itself. (I also won't include issues directly for things listed elsewhere here.)
Using the concrete type of a GAT instead of the projection type can give errors, since lifetimes are chosen to be early-bound vs late-bound.
- #85533
- #87803
In certain cases, we can run into cycle or overflow errors. This is more generally a problem with associated types.
- #87755
- #87758
Bounds on an associatd type need to be proven by an impl, but where clauses need to be proven by the usage. This can lead to confusion when users write one when they mean the other.
- #87831
- #90573
We sometimes can't normalize closure signatures fully. Really an asociated types issue, but might happen a bit more frequently with GATs, since more obvious place for HRTB lifetimes.
- #88382
When calling a function, we assign types to parameters "too late", after we already try (and fail) to normalize projections. Another associated types issue that might pop up more with GATs.
- #88460
- #96230
We don't fully have implied bounds for lifetimes appearing in GAT trait paths, which can lead to unconstrained type errors.
- #88526
Suggestion for adding lifetime bounds can suggest unhelpful fixes (`T: 'a` instead of `Self: 'a`), but the next compiler error after making the suggested change is helpful.
- #90816
- #92096
- #95268
We can end up requiring that `for<'a> I: 'a` when we really want `for<'a where I: 'a> I: 'a`. This can leave unhelpful errors than effectively can't be satisfied unless `I: 'static`. Requires bigger changes and not only GATs.
- #91693
Unlike with non-generic associated types, we don't eagerly normalize with param env candidates. This is intended behavior (for now), to avoid accidentaly stabilizing picking arbitrary impls.
- #91762
Some Iterator adapter patterns (namely `filter`) require Polonius or unsafe to work.
- #92985
## Potential Future work
### Universal type/const quantification
No work has been done to implement this. There are also some questions around implied bounds.
### Object-safe GATs
The intention is to make traits with GATs object-safe. There are some design work to be done around well-formedness rules and general implementation.
### GATified std lib types
It would be helpful to either introduce new std lib traits (like `LendingIterator`) or to modify existing ones (adding a `'a` generic to `Iterator::Item`). There also a number of other candidates, like `Index`/`IndexMut` and `Fn`/`FnMut`/`FnOnce`.
### Reduce the need for `for<'a>`
Seen [here](https://github.com/rust-lang/rfcs/pull/1598#issuecomment-2611378730). One possible syntax:
```rust
trait Iterable {
type Iter<'a>: Iterator<Item = Self::Item<'a>>;
}
fn foo<T>() where T: Iterable, T::Item<let 'a>: Display { } //note the `let`!
```
### Better implied bounds on higher-ranked things
Currently if we have a `type Item<'a> where self: 'a`, and a `for<'a> T: Iterator<Item<'a> = &'a ()`, this requires `for<'a> Self: 'a`. Really, we want `for<'a where T: 'a> ...`
There was some mentions of this all the back in the RFC thread [here](https://github.com/rust-lang/rfcs/pull/1598#issuecomment-264340514).
## Alternatives
### Make generics on associated type in bounds a binder
Imagine the bound `for<'a> T: Trait<Item<'a>= &'a ()>`. It might be that `for<'a>` is "too large" and it should instead be `T: Trait<for<'a> Item<'a>= &'a ()>`. Brought up in RFC thread [here](https://github.com/rust-lang/rfcs/pull/1598#issuecomment-229443863) and in a few places since.
Another related question: Is `for<'a>` the right syntax? Maybe `where<'a>`? Also originally found in RFC thread [here](https://github.com/rust-lang/rfcs/pull/1598#issuecomment-261639969).
### Stabilize lifetime GATs first
This has been brought up a few times. The idea is to only allow GATs with lifetime parameters to in initial stabilization. This was probably most useful prior to actual implementation. At this point, lifetimes, types, and consts are all implemented and work. It feels like an arbitrary split without strong reason.
## History
* On 2016-04-30, [RFC opened](https://github.com/rust-lang/rfcs/pull/1598)
* On 2017-09-02, RFC merged and [tracking issue opened](https://github.com/rust-lang/rust/issues/44265)
* On 2017-10-23, [Move Generics from MethodSig to TraitItem and ImplItem](https://github.com/rust-lang/rust/pull/44766)
* On 2017-12-01, [Generic Associated Types Parsing & Name Resolution](https://github.com/rust-lang/rust/pull/45904)
* On 2017-12-15, [https://github.com/rust-lang/rust/pull/46706](https://github.com/rust-lang/rust/pull/46706)
* On 2018-04-23, [Feature gate where clauses on associated types](https://github.com/rust-lang/rust/pull/49368)
* On 2018-05-10, [Extend tests for RFC1598 (GAT)](https://github.com/rust-lang/rust/pull/49423)
* On 2018-05-24, [Finish implementing GATs (Chalk)](https://github.com/rust-lang/chalk/pull/134)
* On 2019-12-21, [Make GATs less ICE-prone](https://github.com/rust-lang/rust/pull/67160)
* On 2020-02-13, [fix lifetime shadowing check in GATs](https://github.com/rust-lang/rust/pull/68938)
* On 2020-06-20, [Projection bound validation](https://github.com/rust-lang/rust/pull/72788)
* On 2020-10-06, [Separate projection bounds and predicates](https://github.com/rust-lang/rust/pull/73905)
* On 2021-02-05, [Generic associated types in trait paths](https://github.com/rust-lang/rust/pull/79554)
* On 2021-02-06, [Trait objects do not work with generic associated types](https://github.com/rust-lang/rust/issues/81823)
* On 2021-04-28, [Make traits with GATs not object safe](https://github.com/rust-lang/rust/pull/84622)
* On 2021-05-11, [Improve diagnostics for GATs](https://github.com/rust-lang/rust/pull/82272)
* On 2021-07-16, [Make GATs no longer an incomplete feature](https://github.com/rust-lang/rust/pull/84623)
* On 2021-07-16, [Replace associated item bound vars with placeholders when projecting](https://github.com/rust-lang/rust/pull/86993)
* On 2021-07-26, [GATs: Decide whether to have defaults for `where Self: 'a`](https://github.com/rust-lang/rust/issues/87479)
* On 2021-08-25, [Normalize projections under binders](https://github.com/rust-lang/rust/pull/85499)
* On 2021-08-03, [The push for GATs stabilization](https://blog.rust-lang.org/2021/08/03/GATs-stabilization-push.html)
* On 2021-08-12, [Detect stricter constraints on gats where clauses in impls vs trait](https://github.com/rust-lang/rust/pull/88336)
* On 2021-09-20, [Proposal: Change syntax of where clauses on type aliases](https://github.com/rust-lang/rust/issues/89122)
* On 2021-11-06, [Implementation of GATs outlives lint](https://github.com/rust-lang/rust/pull/89970)
* On 2021-12-29. [Parse and suggest moving where clauses after equals for type aliases](https://github.com/rust-lang/rust/pull/92118)
* On 2022-01-15, [Ignore static lifetimes for GATs outlives lint](https://github.com/rust-lang/rust/pull/92865)
* On 2022-02-08, [Don't constrain projection predicates with inference vars in GAT substs](https://github.com/rust-lang/rust/pull/92917)
* On 2022-02-15, [Rework GAT where clause check](https://github.com/rust-lang/rust/pull/93820)
* On 2022-02-19, [Only mark projection as ambiguous if GAT substs are constrained](https://github.com/rust-lang/rust/pull/93892)
* On 2022-03-03, [Support GATs in Rustdoc](https://github.com/rust-lang/rust/pull/94009)
* On 2022-03-06, [Change location of where clause on GATs](https://github.com/rust-lang/rust/pull/90076)
* On 2022-05-04, [A shiny future with GATs blog post](https://jackh726.github.io/rust/2022/05/04/a-shiny-future-with-gats.html)
* On 2022-05-04, [Stabilization PR](https://github.com/rust-lang/rust/pull/96709)
Fix a bunch of typo
This PR will fix some typos detected by [typos].
I only picked the ones I was sure were spelling errors to fix, mostly in
the comments.
[typos]: https://github.com/crate-ci/typos
This PR will fix some typos detected by [typos].
I only picked the ones I was sure were spelling errors to fix, mostly in
the comments.
[typos]: https://github.com/crate-ci/typos
Make forward compatibility lint deprecated_cfg_attr_crate_type_name deny by default
Turns the forward compatibility lint added by #83744 to deprecate `cfg_attr` usage with `#![crate_type]` and `#![crate_name]` attributes into deny by default. Copying the example from #83744:
```Rust
#![crate_type = "lib"] // remains working
#![cfg_attr(foo, crate_type = "bin")] // will stop working
```
Over 8 months have passed since #83744 was merged so I'd say this gives ample time for people to have been warned, so we can make the warning stronger. No usage was found via grep.app except for one, which was in an unmaintained code base that didn't seem to be used in the open source eco system. The crater run conducted in #83744 also didn't show up anything.
cc #91632 - tracking issue for the lint
Reenable disabled early syntax gates as future-incompatibility lints
- MCP: https://github.com/rust-lang/compiler-team/issues/535
The approach taken by this PR is
- Introduce a new lint, `unstable_syntax_pre_expansion`, and reenable the early syntax gates to emit it
- Use the diagnostic stashing mechanism to stash warnings the early warnings
- When the hard error occurs post expansion, steal and cancel the early warning
- Don't display any stashed warnings if errors are present to avoid the same noise problem that hiding type ascription errors is avoiding
Commits are working commits, but in a coherent steps-to-implement manner. Can be squashed if desired.
The preexisting `soft_unstable` lint seems like it would've been a good fit, but it is deny-by-default (appropriate for `#[bench]`) and these gates should be introduced as warn-by-default.
It may be desirable to change the stash mechanism's behavior to not flush lint errors in the presence of other errors either (like is done for warnings here), but upgrading a stash-using lint from warn to error perhaps is enough of a request to see the lint that they shouldn't be hidden; additionally, fixing the last error to get new errors thrown at you always feels bad, so if we know the lint errors are present, we should show them.
Using a new flag/mechanism for a "weak diagnostic" which is suppressed by other errors may also be desirable over assuming any stashed warnings are "weak," but this is the first user of stashing warnings and seems an appropriate use of stashing (it follows the "know more later to refine the diagnostic" pattern; here we learn that it's in a compiled position) so we get to define what it means to stash a non-hard-error diagnostic.
cc `````@petrochenkov````` (seconded MCP)
For named arguments used as implicit position arguments, underline both
the opening curly brace and either:
* if there is formatting, the next character (which will either be the
closing curl brace or the `:` denoting the start of formatting args)
* if there is no formatting, the entire arg span (important if there is
whitespace like `{ }`)
This should make it more obvious where the named argument should be.
Additionally, in the lint message, emit the formatting argument names
without a dollar sign to avoid potentially confusion.
Fixes#99907
Address issue #99265 by checking each positionally used argument
to see if the argument is named and adding a lint to use the name
instead. This way, when named arguments are used positionally in a
different order than their argument order, the suggested lint is
correct.
For example:
```
println!("{b} {}", a=1, b=2);
```
This will now generate the suggestion:
```
println!("{b} {a}", a=1, b=2);
```
Additionally, this check now also correctly replaces or inserts
only where the positional argument is (or would be if implicit).
Also, width and precision are replaced with their argument names
when they exists.
Since the issues were so closely related, this fix for issue #99265
also fixes issue #99266.
Fixes#99265Fixes#99266
Addresses Issue 98466 by emitting a warning if a named argument
is used like a position argument (i.e. the name is not used in
the string to be formatted).
Fixes rust-lang#98466
Finishing touches for `#[expect]` (RFC 2383)
This PR adds documentation and some functionality to rustc's lint passes, to manually fulfill expectations. This is needed for some lints in Clippy. Hopefully, it should be one of the last things before we can move forward with stabilizing this feature.
As part of this PR, I've also updated `clippy::duplicate_mod` to showcase how this new functionality can be used and to ensure that it works correctly.
---
changelog: [`duplicate_mod`]: Fixed lint attribute interaction
r? `@wesleywiser`
cc: https://github.com/rust-lang/rust/issues/97660, https://github.com/rust-lang/rust/issues/85549
And I guess that's it. Here have a magical unicorn 🦄
Fix FFI-unwind unsoundness with mixed panic mode
UB maybe introduced when an FFI exception happens in a `C-unwind` foreign function and it propagates through a crate compiled with `-C panic=unwind` into a crate compiled with `-C panic=abort` (#96926).
To prevent this unsoundness from happening, we will disallow a crate compiled with `-C panic=unwind` to be linked into `panic-abort` *if* it contains a call to `C-unwind` foreign function or function pointer. If no such call exists, then we continue to allow such mixed panic mode linking because it's sound (and stable). In fact we still need the ability to do mixed panic mode linking for std, because we only compile std once with `-C panic=unwind` and link it regardless panic strategy.
For libraries that wish to remain compile-once-and-linkable-to-both-panic-runtimes, a `ffi_unwind_calls` lint is added (gated under `c_unwind` feature gate) to flag any FFI unwind calls that will cause the linkable panic runtime be restricted.
In summary:
```rust
#![warn(ffi_unwind_calls)]
mod foo {
#[no_mangle]
pub extern "C-unwind" fn foo() {}
}
extern "C-unwind" {
fn foo();
}
fn main() {
// Call to Rust function is fine regardless ABI.
foo::foo();
// Call to foreign function, will cause the crate to be unlinkable to panic-abort if compiled with `-Cpanic=unwind`.
unsafe { foo(); }
//~^ WARNING call to foreign function with FFI-unwind ABI
let ptr: extern "C-unwind" fn() = foo::foo;
// Call to function pointer, will cause the crate to be unlinkable to panic-abort if compiled with `-Cpanic=unwind`.
ptr();
//~^ WARNING call to function pointer with FFI-unwind ABI
}
```
Fix#96926
`@rustbot` label: T-compiler F-c_unwind
