There are a few tests that depend on some target features **not** being
enabled by default, and usually they are correct with the default x86-64
target CPU. However, in downstream builds we have modified the default
to fit our distros -- `x86-64-v2` in RHEL 9 and `x86-64-v3` in RHEL 10
-- and the latter especially trips tests that expect not to have AVX.
These cases are few enough that we can just set them back explicitly.
Add test for issue 106269
Closes#106269
Made this an assembly test as the LLVM codegen is still quite verbose and doesn't really indicate the behaviour we want
Add aarch64-apple-visionos and aarch64-apple-visionos-sim tier 3 targets
Introduces `aarch64-apple-visionos` and `aarch64-apple-visionos-sim` as tier 3 targets. This allows native development for the Apple Vision Pro's visionOS platform.
This work has been tracked in https://github.com/rust-lang/compiler-team/issues/642. There is a corresponding `libc` change https://github.com/rust-lang/libc/pull/3568 that is not required for merge.
Ideally we would be able to incorporate [this change](https://github.com/gimli-rs/object/pull/626) to the `object` crate, but the author has stated that a release will not be cut for quite a while. Therefore, the two locations that would reference the xrOS constant from `object` are hardcoded to their MachO values of 11 and 12, accompanied by TODOs to mark the code as needing change. I am open to suggestions on what to do here to get this checked in.
# Tier 3 Target Policy
At this tier, the Rust project provides no official support for a target, so we place minimal requirements on the introduction of targets.
> A tier 3 target must have a designated developer or developers (the "target maintainers") on record to be CCed when issues arise regarding the target. (The mechanism to track and CC such developers may evolve over time.)
See [src/doc/rustc/src/platform-support/apple-visionos.md](e88379034a/src/doc/rustc/src/platform-support/apple-visionos.md)
> Targets must use naming consistent with any existing targets; for instance, a target for the same CPU or OS as an existing Rust target should use the same name for that CPU or OS. Targets should normally use the same names and naming conventions as used elsewhere in the broader ecosystem beyond Rust (such as in other toolchains), unless they have a very good reason to diverge. Changing the name of a target can be highly disruptive, especially once the target reaches a higher tier, so getting the name right is important even for a tier 3 target.
> * Target names should not introduce undue confusion or ambiguity unless absolutely necessary to maintain ecosystem compatibility. For example, if the name of the target makes people extremely likely to form incorrect beliefs about what it targets, the name should be changed or augmented to disambiguate it.
> * If possible, use only letters, numbers, dashes and underscores for the name. Periods (.) are known to cause issues in Cargo.
This naming scheme matches `$ARCH-$VENDOR-$OS-$ABI` which is matches the iOS Apple Silicon simulator (`aarch64-apple-ios-sim`) and other Apple targets.
> Tier 3 targets may have unusual requirements to build or use, but must not
create legal issues or impose onerous legal terms for the Rust project or for
Rust developers or users.
> - The target must not introduce license incompatibilities.
> - Anything added to the Rust repository must be under the standard Rust license (`MIT OR Apache-2.0`).
> - The target must not cause the Rust tools or libraries built for any other host (even when supporting cross-compilation to the target) to depend on any new dependency less permissive than the Rust licensing policy. This applies whether the dependency is a Rust crate that would require adding new license exceptions (as specified by the `tidy` tool in the rust-lang/rust repository), or whether the dependency is a native library or binary. In other words, the introduction of the target must not cause a user installing or running a version of Rust or the Rust tools to besubject to any new license requirements.
> - Compiling, linking, and emitting functional binaries, libraries, or other code for the target (whether hosted on the target itself or cross-compiling from another target) must not depend on proprietary (non-FOSS) libraries. Host tools built for the target itself may depend on the ordinary runtime libraries supplied by the platform and commonly used by other applications built for the target, but those libraries must not be required for code generation for the target; cross-compilation to the target must not require such libraries at all. For instance, `rustc` built for the target may depend on a common proprietary C runtime library or console output library, but must not depend on a proprietary code generation library or code optimization library. Rust's license permits such combinations, but the Rust project has no interest in maintaining such combinations within the scope of Rust itself, even at tier 3.
> - "onerous" here is an intentionally subjective term. At a minimum, "onerous" legal/licensing terms include but are *not* limited to: non-disclosure requirements, non-compete requirements, contributor license agreements (CLAs) or equivalent, "non-commercial"/"research-only"/etc terms, requirements conditional on the employer or employment of any particular Rust developers, revocable terms, any requirements that create liability for the Rust project or its developers or users, or any requirements that adversely affect the livelihood or prospects of the Rust project or its developers or users.
This contribution is fully available under the standard Rust license with no additional legal restrictions whatsoever. This PR does not introduce any new dependency less permissive than the Rust license policy.
The new targets do not depend on proprietary libraries.
> Tier 3 targets should attempt to implement as much of the standard libraries as possible and appropriate (core for most targets, alloc for targets that can support dynamic memory allocation, std for targets with an operating system or equivalent layer of system-provided functionality), but may leave some code unimplemented (either unavailable or stubbed out as appropriate), whether because the target makes it impossible to implement or challenging to implement. The authors of pull requests are not obligated to avoid calling any portions of the standard library on the basis of a tier 3 target not implementing those portions.
This new target mirrors the standard library for watchOS and iOS, with minor divergences.
> The target must provide documentation for the Rust community explaining how to build for the target, using cross-compilation if possible. If the target supports running binaries, or running tests (even if they do not pass), the documentation must explain how to run such binaries or tests for the target, using emulation if possible or dedicated hardware if necessary.
Documentation is provided in [src/doc/rustc/src/platform-support/apple-visionos.md](e88379034a/src/doc/rustc/src/platform-support/apple-visionos.md)
> Neither this policy nor any decisions made regarding targets shall create any binding agreement or estoppel by any party. If any member of an approving Rust team serves as one of the maintainers of a target, or has any legal or employment requirement (explicit or implicit) that might affect their decisions regarding a target, they must recuse themselves from any approval decisions regarding the target's tier status, though they may otherwise participate in discussions.
> * This requirement does not prevent part or all of this policy from being cited in an explicit contract or work agreement (e.g. to implement or maintain support for a target). This requirement exists to ensure that a developer or team responsible for reviewing and approving a target does not face any legal threats or obligations that would prevent them from freely exercising their judgment in such approval, even if such judgment involves subjective matters or goes beyond the letter of these requirements.
> Tier 3 targets must not impose burden on the authors of pull requests, or other developers in the community, to maintain the target. In particular, do not post comments (automated or manual) on a PR that derail or suggest a block on the PR based on a tier 3 target. Do not send automated messages or notifications (via any medium, including via `@)` to a PR author or others involved with a PR regarding a tier 3 target, unless they have opted into such messages.
> * Backlinks such as those generated by the issue/PR tracker when linking to an issue or PR are not considered a violation of this policy, within reason. However, such messages (even on a separate repository) must not generate notifications to anyone involved with a PR who has not requested such notifications.
> Patches adding or updating tier 3 targets must not break any existing tier 2 or tier 1 target, and must not knowingly break another tier 3 target without approval of either the compiler team or the maintainers of the other tier 3 target.
> * In particular, this may come up when working on closely related targets, such as variations of the same architecture with different features. Avoid introducing unconditional uses of features that another variation of the target may not have; use conditional compilation or runtime detection, as appropriate, to let each target run code supported by that target.
I acknowledge these requirements and intend to ensure that they are met.
This target does not touch any existing tier 2 or tier 1 targets and should not break any other targets.
Add `Ord::cmp` for primitives as a `BinOp` in MIR
Update: most of this OP was written months ago. See https://github.com/rust-lang/rust/pull/118310#issuecomment-2016940014 below for where we got to recently that made it ready for review.
---
There are dozens of reasonable ways to implement `Ord::cmp` for integers using comparison, bit-ops, and branches. Those differences are irrelevant at the rust level, however, so we can make things better by adding `BinOp::Cmp` at the MIR level:
1. Exactly how to implement it is left up to the backends, so LLVM can use whatever pattern its optimizer best recognizes and cranelift can use whichever pattern codegens the fastest.
2. By not inlining those details for every use of `cmp`, we drastically reduce the amount of MIR generated for `derive`d `PartialOrd`, while also making it more amenable to MIR-level optimizations.
Having extremely careful `if` ordering to μoptimize resource usage on broadwell (#63767) is great, but it really feels to me like libcore is the wrong place to put that logic. Similarly, using subtraction [tricks](https://graphics.stanford.edu/~seander/bithacks.html#CopyIntegerSign) (#105840) is arguably even nicer, but depends on the optimizer understanding it (https://github.com/llvm/llvm-project/issues/73417) to be practical. Or maybe [bitor is better than add](https://discourse.llvm.org/t/representing-in-ir/67369/2?u=scottmcm)? But maybe only on a future version that [has `or disjoint` support](https://discourse.llvm.org/t/rfc-add-or-disjoint-flag/75036?u=scottmcm)? And just because one of those forms happens to be good for LLVM, there's no guarantee that it'd be the same form that GCC or Cranelift would rather see -- especially given their very different optimizers. Not to mention that if LLVM gets a spaceship intrinsic -- [which it should](https://rust-lang.zulipchat.com/#narrow/stream/131828-t-compiler/topic/Suboptimal.20inlining.20in.20std.20function.20.60binary_search.60/near/404250586) -- we'll need at least a rustc intrinsic to be able to call it.
As for simplifying it in Rust, we now regularly inline `{integer}::partial_cmp`, but it's quite a large amount of IR. The best way to see that is with 8811efa88b (diff-d134c32d028fbe2bf835fef2df9aca9d13332dd82284ff21ee7ebf717bfa4765R113) -- I added a new pre-codegen MIR test for a simple 3-tuple struct, and this PR change it from 36 locals and 26 basic blocks down to 24 locals and 8 basic blocks. Even better, as soon as the construct-`Some`-then-match-it-in-same-BB noise is cleaned up, this'll expose the `Cmp == 0` branches clearly in MIR, so that an InstCombine (#105808) can simplify that to just a `BinOp::Eq` and thus fix some of our generated code perf issues. (Tracking that through today's `if a < b { Less } else if a == b { Equal } else { Greater }` would be *much* harder.)
---
r? `@ghost`
But first I should check that perf is ok with this
~~...and my true nemesis, tidy.~~
Let codegen decide when to `mem::swap` with immediates
Making `libcore` decide this is silly; the backend has so much better information about when it's a good idea.
Thus this PR introduces a new `typed_swap` intrinsic with a fallback body, and replaces that fallback implementation when swapping immediates or scalar pairs.
r? oli-obk
Replaces #111744, and means we'll never need more libs PRs like #111803 or #107140
Remove SpecOptionPartialEq
With the recent LLVM bump, the specialization for Option::partial_eq on types with niches is no longer necessary. I kept the manual implementation as it still gives us better codegen than the derive (will look at this seperately).
Also implemented PartialOrd/Ord by hand as it _somewhat_ improves codegen for #49892: https://godbolt.org/z/vx5Y6oW4Y
Making `libcore` decide this is silly; the backend has so much better information about when it's a good idea.
So introduce a new `typed_swap` intrinsic with a fallback body, but replace that implementation for immediates and scalar pairs.
Add tests for the generated assembly of mask related simd instructions.
The tests show that the code generation currently uses the least significant bits of <iX x N> vector masks when converting to <i1 xN>. This leads to an additional left shift operation in the assembly for x86, since mask operations on x86 operate based on the most significant bit.
The exception is simd_bitmask, which already uses the most-significant bit.
This additional instruction would be removed by the changes in #104693, which makes all mask operations consistently use the most significant bits.
By using the "C" calling convention the tests should be stable regarding changes in register allocation, but it is possible that future llvm updates will require updating some of the checks.
Rename `wasm32-wasi-preview1-threads` to `wasm32-wasip1-threads`
This commit renames the current `wasm32-wasi-preview1-threads` target to `wasm32-wasip1-threads`. The need for this rename is a bit unfortunate as the previous name was chosen in an attempt to be future-compatible with other WASI targets. Originally this target was proposed to be `wasm32-wasi-threads`, and that's what was originally implemented in wasi-sdk as well. After discussion though and with the plans for the upcoming component-model target (now named `wasm32-wasip2`) the "preview1" naming was chosen for the threads-based target. The WASI subgroup later decided that it was time to drop the "preview" terminology and recommends "pX" instead, hence previous PRs to add `wasm32-wasip2` and rename `wasm32-wasi` to `wasm32-wasip1`.
So, with all that history, the "proper name" for this target is different than its current name, so one way or another a rename is required. This PR proposes renaming this target cold-turkey, unlike `wasm32-wasi` which is having a long transition period to change its name. The threads-based target is predicted to see only a fraction of the traffic of `wasm32-wasi` due to the unstable nature of the WASI threads proposal itself.
While I was here I updated the in-tree documentation in the target spec file itself as most of the documentation was copied from the original WASI target and wasn't as applicable to this target.
Also, as an aside, I can at least try to apologize for all the naming confusion here, but this is hopefully the last WASI-related rename.
The tests show that the code generation currently uses the least
significant bits of <iX x N> vector masks when converting to <i1 xN>.
This leads to an additional left shift operation in the assembly for
x86, since mask operations on x86 operate based on the most significant
bit. On aarch64 the left shift is followed by a comparison against zero,
which repeats the sign bit across the whole lane.
The exception, which does not introduce an unneeded shift, is
simd_bitmask, because the code generation already shifts before
truncating.
By using the "C" calling convention the tests should be stable regarding
changes in register allocation, but it is possible that future llvm
updates will require updating some of the checks.
This additional instruction would be removed by the fix in #104693,
which uses the most significant bit for all mask operations.
Test wasm32-wasip1 in CI, not wasm32-unknown-unknown
This commit changes CI to no longer test the `wasm32-unknown-unknown` target and instead test the `wasm32-wasip1` target. There was some discussion of this in a [Zulip thread], and the motivations for this PR are:
* Runtime failures on `wasm32-unknown-unknown` print nothing, meaning all you get is "something failed". In contrast `wasm32-wasip1` can print to stdout/stderr.
* The unknown-unknown target is missing lots of pieces of libstd, and while `wasm32-wasip1` is also missing some pieces (e.g. threads) it's missing fewer pieces. This means that many more tests can be run.
Overall my hope is to improve the debuggability of wasm failures on CI and ideally be a bit less of a maintenance burden.
This commit specifically removes the testing of `wasm32-unknown-unknown` and replaces it with testing of `wasm32-wasip1`. Along the way there were a number of other archiectural changes made as well, including:
* A new `target.*.runtool` option can now be specified in `config.toml` which is passed as `--runtool` to `compiletest`. This is used to reimplement execution of WebAssembly in a less-wasm-specific fashion.
* The default value for `runtool` is an ambiently located WebAssembly runtime found on the system, if any. I've implemented logic for Wasmtime.
* Existing testing support for `wasm32-unknown-unknown` and Emscripten has been removed. I'm not aware of Emscripten testing being run any time recently and otherwise `wasm32-wasip1` is in theory the focus now.
* I've added a new `//@ needs-threads` directive for `compiletest` and classified a bunch of wasm-ignored tests as needing threads. In theory these tests can run on `wasm32-wasi-preview1-threads`, for example.
* I've tried to audit all existing tests that are either `ignore-emscripten` or `ignore-wasm*`. Many now run on `wasm32-wasip1` due to being able to emit error messages, for example. Many are updated with comments as to why they can't run as well.
* The `compiletest` output matching for `wasm32-wasip1` automatically uses "match a subset" mode implemented in `compiletest`. This is because WebAssembly runtimes often add extra information on failure, such as the `unreachable` instruction in `panic!`, which isn't able to be matched against the golden output from native platforms.
* I've ported most existing `run-make` tests that use custom Node.js wrapper scripts to the new run-make-based-in-Rust infrastructure. To do this I added `wasmparser` as a dependency of `run-make-support` for the various wasm tests to use that parse wasm files. The one test that executed WebAssembly now uses `wasmtime`-the-CLI to execute the test instead. I have not ported over an exception-handling test as Wasmtime doesn't implement this yet.
* I've updated the `test` crate to print out timing information for WASI targets as it can do that (gets a previously ignored test now passing).
* The `test-various` image now builds a WASI sysroot for the WASI target and additionally downloads a fixed release of Wasmtime, currently the latest one at 18.0.2, and uses that for testing.
[Zulip thread]: https://rust-lang.zulipchat.com/#narrow/stream/131828-t-compiler/topic/Have.20wasm.20tests.20ever.20caused.20problems.20on.20CI.3F/near/424317944
* The WASI targets deal with the `main` symbol a bit differently than
native so some `codegen` and `assembly` tests have been ignored.
* All `ignore-emscripten` directives have been updated to
`ignore-wasm32` to be more clear that all wasm targets are ignored and
it's not just Emscripten.
* Most `ignore-wasm32-bare` directives are now gone.
* Some ignore directives for wasm were switched to `needs-unwind`
instead.
* Many `ignore-wasm32*` directives are removed as the tests work with
WASI as opposed to `wasm32-unknown-unknown`.
This commit renames the current `wasm32-wasi-preview1-threads` target to
`wasm32-wasip1-threads`. The need for this rename is a bit unfortunate
as the previous name was chosen in an attempt to be future-compatible
with other WASI targets. Originally this target was proposed to be
`wasm32-wasi-threads`, and that's what was originally implemented in
wasi-sdk as well. After discussion though and with the plans for the
upcoming component-model target (now named `wasm32-wasip2`) the
"preview1" naming was chosen for the threads-based target. The WASI
subgroup later decided that it was time to drop the "preview"
terminology and recommends "pX" instead, hence previous PRs to add
`wasm32-wasip2` and rename `wasm32-wasi` to `wasm32-wasip1`.
So, with all that history, the "proper name" for this target is
different than its current name, so one way or another a rename is
required. This PR proposes renaming this target cold-turkey, unlike
`wasm32-wasi` which is having a long transition period to change its
name. The threads-based target is predicted to see only a fraction of
the traffic of `wasm32-wasi` due to the unstable nature of the WASI
threads proposal itself.
While I was here I updated the in-tree documentation in the target spec
file itself as most of the documentation was copied from the original
WASI target and wasn't as applicable to this target.
Also, as an aside, I can at least try to apologize for all the naming
confusion here, but this is hopefully the last WASI-related rename.
Introduces the `arm64ec-pc-windows-msvc` target for building Arm64EC ("Emulation Compatible") binaries for Windows.
For more information about Arm64EC see <https://learn.microsoft.com/en-us/windows/arm/arm64ec>.
Tier 3 policy:
> A tier 3 target must have a designated developer or developers (the "target maintainers") on record to be CCed when issues arise regarding the target. (The mechanism to track and CC such developers may evolve over time.)
I will be the maintainer for this target.
> Targets must use naming consistent with any existing targets; for instance, a target for the same CPU or OS as an existing Rust target should use the same name for that CPU or OS. Targets should normally use the same names and naming conventions as used elsewhere in the broader ecosystem beyond Rust (such as in other toolchains), unless they have a very good reason to diverge. Changing the name of a target can be highly disruptive, especially once the target reaches a higher tier, so getting the name right is important even for a tier 3 target.
Target uses the `arm64ec` architecture to match LLVM and MSVC, and the `-pc-windows-msvc` suffix to indicate that it targets Windows via the MSVC environment.
> Target names should not introduce undue confusion or ambiguity unless absolutely necessary to maintain ecosystem compatibility. For example, if the name of the target makes people extremely likely to form incorrect beliefs about what it targets, the name should be changed or augmented to disambiguate it.
Target name exactly specifies the type of code that will be produced.
> If possible, use only letters, numbers, dashes and underscores for the name. Periods (.) are known to cause issues in Cargo.
Done.
> Tier 3 targets may have unusual requirements to build or use, but must not create legal issues or impose onerous legal terms for the Rust project or for Rust developers or users.
> The target must not introduce license incompatibilities.
Uses the same dependencies, requirements and licensing as the other `*-pc-windows-msvc` targets.
> Anything added to the Rust repository must be under the standard Rust license (MIT OR Apache-2.0).
Understood.
> The target must not cause the Rust tools or libraries built for any other host (even when supporting cross-compilation to the target) to depend on any new dependency less permissive than the Rust licensing policy. This applies whether the dependency is a Rust crate that would require adding new license exceptions (as specified by the tidy tool in the rust-lang/rust repository), or whether the dependency is a native library or binary. In other words, the introduction of the target must not cause a user installing or running a version of Rust or the Rust tools to be subject to any new license requirements.
> Compiling, linking, and emitting functional binaries, libraries, or other code for the target (whether hosted on the target itself or cross-compiling from another target) must not depend on proprietary (non-FOSS) libraries. Host tools built for the target itself may depend on the ordinary runtime libraries supplied by the platform and commonly used by other applications built for the target, but those libraries must not be required for code generation for the target; cross-compilation to the target must not require such libraries at all. For instance, rustc built for the target may depend on a common proprietary C runtime library or console output library, but must not depend on a proprietary code generation library or code optimization library. Rust's license permits such combinations, but the Rust project has no interest in maintaining such combinations within the scope of Rust itself, even at tier 3.
> "onerous" here is an intentionally subjective term. At a minimum, "onerous" legal/licensing terms include but are not limited to: non-disclosure requirements, non-compete requirements, contributor license agreements (CLAs) or equivalent, "non-commercial"/"research-only"/etc terms, requirements conditional on the employer or employment of any particular Rust developers, revocable terms, any requirements that create liability for the Rust project or its developers or users, or any requirements that adversely affect the livelihood or prospects of the Rust project or its developers or users.
Uses the same dependencies, requirements and licensing as the other `*-pc-windows-msvc` targets.
> Neither this policy nor any decisions made regarding targets shall create any binding agreement or estoppel by any party. If any member of an approving Rust team serves as one of the maintainers of a target, or has any legal or employment requirement (explicit or implicit) that might affect their decisions regarding a target, they must recuse themselves from any approval decisions regarding the target's tier status, though they may otherwise participate in discussions.
> This requirement does not prevent part or all of this policy from being cited in an explicit contract or work agreement (e.g. to implement or maintain support for a target). This requirement exists to ensure that a developer or team responsible for reviewing and approving a target does not face any legal threats or obligations that would prevent them from freely exercising their judgment in such approval, even if such judgment involves subjective matters or goes beyond the letter of these requirements.
Understood, I am not a member of the Rust team.
> Tier 3 targets should attempt to implement as much of the standard libraries as possible and appropriate (core for most targets, alloc for targets that can support dynamic memory allocation, std for targets with an operating system or equivalent layer of system-provided functionality), but may leave some code unimplemented (either unavailable or stubbed out as appropriate), whether because the target makes it impossible to implement or challenging to implement. The authors of pull requests are not obligated to avoid calling any portions of the standard library on the basis of a tier 3 target not implementing those portions.
Both `core` and `alloc` are supported.
Support for `std` dependends on making changes to the standard library, `stdarch` and `backtrace` which cannot be done yet as the bootstrapping compiler raises a warning ("unexpected `cfg` condition value") for `target_arch = "arm64ec"`.
> The target must provide documentation for the Rust community explaining how to build for the target, using cross-compilation if possible. If the target supports running binaries, or running tests (even if they do not pass), the documentation must explain how to run such binaries or tests for the target, using emulation if possible or dedicated hardware if necessary.
Documentation is provided in src/doc/rustc/src/platform-support/arm64ec-pc-windows-msvc.md
> Tier 3 targets must not impose burden on the authors of pull requests, or other developers in the community, to maintain the target. In particular, do not post comments (automated or manual) on a PR that derail or suggest a block on the PR based on a tier 3 target. Do not send automated messages or notifications (via any medium, including via @) to a PR author or others involved with a PR regarding a tier 3 target, unless they have opted into such messages.
> Backlinks such as those generated by the issue/PR tracker when linking to an issue or PR are not considered a violation of this policy, within reason. However, such messages (even on a separate repository) must not generate notifications to anyone involved with a PR who has not requested such notifications.
> Patches adding or updating tier 3 targets must not break any existing tier 2 or tier 1 target, and must not knowingly break another tier 3 target without approval of either the compiler team or the maintainers of the other tier 3 target.
> In particular, this may come up when working on closely related targets, such as variations of the same architecture with different features. Avoid introducing unconditional uses of features that another variation of the target may not have; use conditional compilation or runtime detection, as appropriate, to let each target run code supported by that target.
Understood.
Add a new `wasm32-wasip1` target to rustc
This commit adds a new target called `wasm32-wasip1` to rustc. This new target is explained in these two MCPs:
* https://github.com/rust-lang/compiler-team/issues/607
* https://github.com/rust-lang/compiler-team/issues/695
In short, the previous `wasm32-wasi` target is going to be renamed to `wasm32-wasip1` to better live alongside the [new `wasm32-wasip2` target](https://github.com/rust-lang/rust/pull/119616). This new target is added alongside the `wasm32-wasi` target and has the exact same definition as the previous target. This PR is effectively a rename of `wasm32-wasi` to `wasm32-wasip1`. Note, however, that as explained in rust-lang/compiler-team#695 the previous `wasm32-wasi` target is not being removed at this time. This change will reach stable Rust before even a warning about the rename will be printed. At this time this change is just the start where a new target is introduced and users can start migrating if they support only Nightly for example.
This commit adds a new target called `wasm32-wasip1` to rustc.
This new target is explained in these two MCPs:
* https://github.com/rust-lang/compiler-team/issues/607
* https://github.com/rust-lang/compiler-team/issues/695
In short, the previous `wasm32-wasi` target is going to be renamed to
`wasm32-wasip1` to better live alongside the [new
`wasm32-wasip2` target](https://github.com/rust-lang/rust/pull/119616).
This new target is added alongside the `wasm32-wasi` target and has the
exact same definition as the previous target. This PR is effectively a
rename of `wasm32-wasi` to `wasm32-wasip1`. Note, however, that
as explained in rust-lang/compiler-team#695 the previous `wasm32-wasi`
target is not being removed at this time. This change will reach stable
Rust before even a warning about the rename will be printed. At this
time this change is just the start where a new target is introduced and
users can start migrating if they support only Nightly for example.
On ELF, the text section is opened with ".text", on MachO with
".section __TEXT,__text".
Previously, on ELF this test was actually matching a GNU note
section, which is no longer emitted on Solaris starting with
LLVM 18.
Fixes https://github.com/rust-lang/rust/issues/120105.
Adds a basic assembly test checking that each target can produce assembly
and update the target tier policy to require this.
Signed-off-by: David Wood <david@davidtw.co>
Enable stack probes on aarch64 for LLVM 18
I tested this on `aarch64-unknown-linux-gnu` with LLVM main (~18).
cc #77071, to be closed once we upgrade our LLVM submodule.
`.debug_pubnames` and `.debug_pubtypes` are poorly designed and people
seldom use them. However, they take a considerable portion of size in
the final binary. This tells LLVM stop emitting those sections on
DWARFv4 or lower. DWARFv5 use `.debug_names` which is more concise
in size and performant for name lookup.
