Taint const qualifs if a static is referenced that didn't pass wfcheck
It is correct to only check the signature here, as the ICE is caused by `USE_WITH_ERROR` trying to allocate memory to store the result of `WITH_ERROR` before evaluating it.
fixes#123153
interpret: remove outdated comment
In https://github.com/rust-lang/rust/pull/107756, allocation became generally fallible, so the "only panic if there is provenance" no longer applies.
r? ``@oli-obk``
Check `x86_64` size assertions on `aarch64`, too
(Context: https://rust-lang.zulipchat.com/#narrow/stream/131828-t-compiler/topic/Checking.20size.20assertions.20on.20aarch64.3F)
Currently the compiler has around 30 sets of `static_assert_size!` for various size-critical data structures (e.g. various IR nodes), guarded by `#[cfg(all(target_arch = "x86_64", target_pointer_width = "64"))]`.
(Presumably this cfg avoids having to maintain separate size values for 32-bit targets and unusual 64-bit targets. Apparently it may have been necessary before the i128/u128 alignment changes, too.)
This is slightly incovenient for people on aarch64 workstations (e.g. Macs), because the assertions normally aren't checked until we push to a PR. So this PR adds `aarch64` to the `#[cfg(..)]` guarding all of those assertions in the compiler.
---
Implemented with a simple find/replace. Verified by manually inspecting each `static_assert_size!` in `compiler/`, and checking that either the replacement succeeded, or adding aarch64 wouldn't have been appropriate.
rename ptr::from_exposed_addr -> ptr::with_exposed_provenance
As discussed on [Zulip](https://rust-lang.zulipchat.com/#narrow/stream/136281-t-opsem/topic/To.20expose.20or.20not.20to.20expose/near/427757066).
The old name, `from_exposed_addr`, makes little sense as it's not the address that is exposed, it's the provenance. (`ptr.expose_addr()` stays unchanged as we haven't found a better option yet. The intended interpretation is "expose the provenance and return the address".)
The new name nicely matches `ptr::without_provenance`.
Add `Ord::cmp` for primitives as a `BinOp` in MIR
Update: most of this OP was written months ago. See https://github.com/rust-lang/rust/pull/118310#issuecomment-2016940014 below for where we got to recently that made it ready for review.
---
There are dozens of reasonable ways to implement `Ord::cmp` for integers using comparison, bit-ops, and branches. Those differences are irrelevant at the rust level, however, so we can make things better by adding `BinOp::Cmp` at the MIR level:
1. Exactly how to implement it is left up to the backends, so LLVM can use whatever pattern its optimizer best recognizes and cranelift can use whichever pattern codegens the fastest.
2. By not inlining those details for every use of `cmp`, we drastically reduce the amount of MIR generated for `derive`d `PartialOrd`, while also making it more amenable to MIR-level optimizations.
Having extremely careful `if` ordering to μoptimize resource usage on broadwell (#63767) is great, but it really feels to me like libcore is the wrong place to put that logic. Similarly, using subtraction [tricks](https://graphics.stanford.edu/~seander/bithacks.html#CopyIntegerSign) (#105840) is arguably even nicer, but depends on the optimizer understanding it (https://github.com/llvm/llvm-project/issues/73417) to be practical. Or maybe [bitor is better than add](https://discourse.llvm.org/t/representing-in-ir/67369/2?u=scottmcm)? But maybe only on a future version that [has `or disjoint` support](https://discourse.llvm.org/t/rfc-add-or-disjoint-flag/75036?u=scottmcm)? And just because one of those forms happens to be good for LLVM, there's no guarantee that it'd be the same form that GCC or Cranelift would rather see -- especially given their very different optimizers. Not to mention that if LLVM gets a spaceship intrinsic -- [which it should](https://rust-lang.zulipchat.com/#narrow/stream/131828-t-compiler/topic/Suboptimal.20inlining.20in.20std.20function.20.60binary_search.60/near/404250586) -- we'll need at least a rustc intrinsic to be able to call it.
As for simplifying it in Rust, we now regularly inline `{integer}::partial_cmp`, but it's quite a large amount of IR. The best way to see that is with 8811efa88b (diff-d134c32d028fbe2bf835fef2df9aca9d13332dd82284ff21ee7ebf717bfa4765R113) -- I added a new pre-codegen MIR test for a simple 3-tuple struct, and this PR change it from 36 locals and 26 basic blocks down to 24 locals and 8 basic blocks. Even better, as soon as the construct-`Some`-then-match-it-in-same-BB noise is cleaned up, this'll expose the `Cmp == 0` branches clearly in MIR, so that an InstCombine (#105808) can simplify that to just a `BinOp::Eq` and thus fix some of our generated code perf issues. (Tracking that through today's `if a < b { Less } else if a == b { Equal } else { Greater }` would be *much* harder.)
---
r? `@ghost`
But first I should check that perf is ok with this
~~...and my true nemesis, tidy.~~
Make `TyCtxt::coroutine_layout` take coroutine's kind parameter
For coroutines that come from coroutine-closures (i.e. async closures), we may have two kinds of bodies stored in the coroutine; one that takes the closure's captures by reference, and one that takes the captures by move.
These currently have identical layouts, but if we do any optimization for these layouts that are related to the upvars, then they will diverge -- e.g. https://github.com/rust-lang/rust/pull/120168#discussion_r1536943728.
This PR relaxes the assertion I added in #121122, and instead make the `TyCtxt::coroutine_layout` method take the `coroutine_kind_ty` argument from the coroutine, which will allow us to differentiate these by-move and by-ref bodies.
Print a backtrace in const eval if interrupted
Demo:
```rust
#![feature(const_eval_limit)]
#![const_eval_limit = "0"]
const OW: u64 = {
let mut res: u64 = 0;
let mut i = 0;
while i < u64::MAX {
res = res.wrapping_add(i);
i += 1;
}
res
};
fn main() {
println!("{}", OW);
}
```
```
╭ ➜ ben@archlinux:~/rust
╰ ➤ rustc +stage1 spin.rs
^Cerror[E0080]: evaluation of constant value failed
--> spin.rs:8:33
|
8 | res = res.wrapping_add(i);
| ^ Compilation was interrupted
note: erroneous constant used
--> spin.rs:15:20
|
15 | println!("{}", OW);
| ^^
note: erroneous constant used
--> spin.rs:15:20
|
15 | println!("{}", OW);
| ^^
|
= note: this note originates in the macro `$crate::format_args_nl` which comes from the expansion of the macro `println` (in Nightly builds, run with -Z macro-backtrace for more info)
error: aborting due to previous error
For more information about this error, try `rustc --explain E0080`.
```
Unbox and unwrap the contents of `StatementKind::Coverage`
The payload of coverage statements was historically a structure with several fields, so it was boxed to avoid bloating `StatementKind`.
Now that the payload is a single relatively-small enum, we can replace `Box<Coverage>` with just `CoverageKind`.
This patch also adds a size assertion for `StatementKind`, to avoid accidentally bloating it in the future.
``@rustbot`` label +A-code-coverage
Fix validation on substituted callee bodies in MIR inliner
When inlining a coroutine, we will substitute the MIR body with the args of the call. There is code in the MIR validator that attempts to prevent query cycles, and will use the coroutine body directly when it detects that's the body that's being validated. That means that when inlining a coroutine body that has been substituted, it may no longer be parameterized over the original args of the coroutine, which will lead to substitution ICEs.
Fixes#119064
refactor check_{lang,library}_ub: use a single intrinsic
This enacts the plan I laid out [here](https://github.com/rust-lang/rust/pull/122282#issuecomment-1996917998): use a single intrinsic, called `ub_checks` (in aniticpation of https://github.com/rust-lang/compiler-team/issues/725), that just exposes the value of `debug_assertions` (consistently implemented in both codegen and the interpreter). Put the language vs library UB logic into the library.
This makes it easier to do something like https://github.com/rust-lang/rust/pull/122282 in the future: that just slightly alters the semantics of `ub_checks` (making it more approximating when crates built with different flags are mixed), but it no longer affects whether these checks can happen in Miri or compile-time.
The first commit just moves things around; I don't think these macros and functions belong into `intrinsics.rs` as they are not intrinsics.
r? `@saethlin`
Rollup of 11 pull requests
Successful merges:
- #120577 (Stabilize slice_split_at_unchecked)
- #122698 (Cancel `cargo update` job if there's no updates)
- #122780 (Rename `hir::Local` into `hir::LetStmt`)
- #122915 (Delay a bug if no RPITITs were found)
- #122916 (docs(sync): normalize dot in fn summaries)
- #122921 (Enable more mir-opt tests in debug builds)
- #122922 (-Zprint-type-sizes: print the types of awaitees and unnamed coroutine locals.)
- #122927 (Change an ICE regression test to use the original reproducer)
- #122930 (add panic location to 'panicked while processing panic')
- #122931 (Fix some typos in the pin.rs)
- #122933 (tag_for_variant follow-ups)
r? `@ghost`
`@rustbot` modify labels: rollup
Let codegen decide when to `mem::swap` with immediates
Making `libcore` decide this is silly; the backend has so much better information about when it's a good idea.
Thus this PR introduces a new `typed_swap` intrinsic with a fallback body, and replaces that fallback implementation when swapping immediates or scalar pairs.
r? oli-obk
Replaces #111744, and means we'll never need more libs PRs like #111803 or #107140
The payload of coverage statements was historically a structure with several
fields, so it was boxed to avoid bloating `StatementKind`.
Now that the payload is a single relatively-small enum, we can replace
`Box<Coverage>` with just `CoverageKind`.
This patch also adds a size assertion for `StatementKind`, to avoid
accidentally bloating it in the future.
Rollup of 8 pull requests
Successful merges:
- #114009 (compiler: allow transmute of ZST arrays with generics)
- #122195 (Note that the caller chooses a type for type param)
- #122651 (Suggest `_` for missing generic arguments in turbofish)
- #122784 (Add `tag_for_variant` query)
- #122839 (Split out `PredicatePolarity` from `ImplPolarity`)
- #122873 (Merge my contributor emails into one using mailmap)
- #122885 (Adjust better spastorino membership to triagebot's adhoc_groups)
- #122888 (add a couple more tests)
r? `@ghost`
`@rustbot` modify labels: rollup
Add `tag_for_variant` query
This query allows for sharing code between `rustc_const_eval` and `rustc_transmutability`. It's a precursor to a PR I'm working on to entirely replace the bespoke layout computations in `rustc_transmutability`.
r? `@compiler-errors`
coverage: Clean up marker statements that aren't needed later
Some of the marker statements used by coverage are added during MIR building for use by the InstrumentCoverage pass (during analysis), and are not needed afterwards.
```@rustbot``` label +A-code-coverage
interpret/allocation: fix aliasing issue in interpreter and refactor getters a bit
That new raw getter will be needed to let Miri pass pointers to natively executed FFI code ("extern-so" mode).
While doing that I realized our get_bytes_mut are named less scary than get_bytes_unchecked so I rectified that. Also I realized `mem_copy_repeatedly` would break if we called it for multiple overlapping copies so I made sure this does not happen.
And I realized that we are actually [violating Stacked Borrows in the interpreter](https://rust-lang.zulipchat.com/#narrow/stream/136281-t-opsem/topic/I.20think.20Miri.20violates.20Stacked.20Borrows.20.F0.9F.99.88).^^ That was introduced in https://github.com/rust-lang/rust/pull/87777.
r? ```@oli-obk```
Some of the marker statements used by coverage are added during MIR building
for use by the InstrumentCoverage pass (during analysis), and are not needed
afterwards.
various clippy fixes
We need to keep the order of the given clippy lint rules before passing them.
Since clap doesn't offer any useful interface for this purpose out of the box,
we have to handle it manually.
Additionally, this PR makes `-D` rules work as expected. Previously, lint rules were limited to `-W`. By enabling `-D`, clippy began to complain numerous lines in the tree, all of which have been resolved in this PR as well.
Fixes#121481
cc `@matthiaskrgr`
clean up `Sized` checking
This PR cleans up `sized_constraint` and related functions to make them simpler and faster. This should not make more or less code compile, but it can change error output in some rare cases.
## enums and unions are `Sized`, even if they are not WF
The previous code has some special handling for enums, which made them sized if and only if the last field of each variant is sized. For example given this definition (which is not WF)
```rust
enum E<T1: ?Sized, T2: ?Sized, U1: ?Sized, U2: ?Sized> {
A(T1, T2),
B(U1, U2),
}
```
the enum was sized if and only if `T2` and `U2` are sized, while `T1` and `T2` were ignored for `Sized` checking. After this PR this enum will always be sized.
Unsized enums are not a thing in Rust and removing this special case allows us to return an `Option<Ty>` from `sized_constraint`, rather than a `List<Ty>`.
Similarly, the old code made an union defined like this
```rust
union Union<T: ?Sized, U: ?Sized> {
head: T,
tail: U,
}
```
sized if and only if `U` is sized, completely ignoring `T`. This just makes no sense at all and now this union is always sized.
## apply the "perf hack" to all (non-error) types, instead of just type parameters
This "perf hack" skips evaluating `sized_constraint(adt): Sized` if `sized_constraint(adt): Sized` exactly matches a predicate defined on `adt`, for example:
```rust
// `Foo<T>: Sized` iff `T: Sized`, but we know `T: Sized` from a predicate of `Foo`
struct Foo<T /*: Sized */>(T);
```
Previously this was only applied to type parameters and now it is applied to every type. This means that for example this type is now always sized:
```rust
// Note that this definition is WF, but the type `S<T>` not WF in the global/empty ParamEnv
struct S<T>([T]) where [T]: Sized;
```
I don't anticipate this to affect compile time of any real-world program, but it makes the code a bit nicer and it also makes error messages a bit more consistent if someone does write such a cursed type.
## tuples are sized if the last type is sized
The old solver already has this behavior and this PR also implements it for the new solver and `is_trivially_sized`. This makes it so that tuples work more like a struct defined like this:
```rust
struct TupleN<T1, T2, /* ... */ Tn: ?Sized>(T1, T2, /* ... */ Tn);
```
This might improve the compile time of programs with large tuples a little, but is mostly also a consistency fix.
## `is_trivially_sized` for more types
This function is used post-typeck code (borrowck, const eval, codegen) to skip evaluating `T: Sized` in some cases. It will now return `true` in more cases, most notably `UnsafeCell<T>` and `ManuallyDrop<T>` where `T.is_trivially_sized`.
I'm anticipating that this change will improve compile time for some real world programs.
Provide structured suggestion for `#![feature(foo)]`
```
error: `S2<'_>` is forbidden as the type of a const generic parameter
--> $DIR/lifetime-in-const-param.rs:5:23
|
LL | struct S<'a, const N: S2>(&'a ());
| ^^
|
= note: the only supported types are integers, `bool` and `char`
help: add `#![feature(adt_const_params)]` to the crate attributes to enable more complex and user defined types
|
LL + #![feature(adt_const_params)]
|
```
Fix#55941.
```
error: `S2<'_>` is forbidden as the type of a const generic parameter
--> $DIR/lifetime-in-const-param.rs:5:23
|
LL | struct S<'a, const N: S2>(&'a ());
| ^^
|
= note: the only supported types are integers, `bool` and `char`
help: add `#![feature(adt_const_params)]` to the crate attributes to enable more complex and user defined types
|
LL + #![feature(adt_const_params)]
|
```
Fix#55941.
add_retag: ensure box-to-raw-ptr casts are preserved for Miri
In https://github.com/rust-lang/rust/pull/122233 I added `retag_box_to_raw` not realizing that we can already do `addr_of_mut!(*bx)` to turn a box into a raw pointer without an intermediate reference. We just need to ensure this information is preserved past the ElaborateBoxDerefs pass.
r? ``@oli-obk``
Making `libcore` decide this is silly; the backend has so much better information about when it's a good idea.
So introduce a new `typed_swap` intrinsic with a fallback body, but replace that implementation for immediates and scalar pairs.
interpret: ensure that Place is never used for a different frame
We store the address where the stack frame stores its `locals`. The idea is that even if we pop and push, or switch to a different thread with a larger number of frames, then the `locals` address will most likely change so we'll notice that problem. This is made possible by some recent changes by `@WaffleLapkin,` where we no longer use `Place` across things that change the number of stack frames.
I made these debug assertions for now, just to make sure this can't cost us any perf.
The first commit is unrelated but it's a one-line comment change so it didn't warrant a separate PR...
r? `@oli-obk`
miri: add some chance to reuse addresses of previously freed allocations
The hope is that this can help us find ABA issues.
Unfortunately this needs rustc changes so I can't easily run the regular benchmark suite. I used `src/tools/miri/tests/pass/float_nan.rs` as a substitute:
```
Before:
Benchmark 1: ./x.py run miri --stage 0 --args src/tools/miri/tests/pass/float_nan.rs --args --edition=2021
Time (mean ± σ): 9.570 s ± 0.013 s [User: 9.279 s, System: 0.290 s]
Range (min … max): 9.561 s … 9.579 s 2 runs
After:
Benchmark 1: ./x.py run miri --stage 0 --args src/tools/miri/tests/pass/float_nan.rs --args --edition=2021
Time (mean ± σ): 9.698 s ± 0.046 s [User: 9.413 s, System: 0.279 s]
Range (min … max): 9.666 s … 9.731 s 2 runs
```
That's a ~1.3% slowdown, which seems fine to me. I have seen a lot of noise in this style of benchmarking so I don't quite trust this anyway; we can make further experiments in the Miri repo after this migrated there.
r? `@oli-obk`
Add tests (and a bit of cleanup) for interior mut handling in promotion and const-checking
Basically these are the parts of https://github.com/rust-lang/rust/pull/121786 that can be salvaged.
r? ``@oli-obk``
MIR printing: print the path of uneval'd const
Currently it just prints `const _` which makes it impossible to say which constant is being referred to.
Also refer to promoteds in a consistent way; previously MIR printing would do
```
promoted[0] in C1: &Option<Cell<i32>> = {
// ...
}
```
Now that should be
```
const C1::promoted[0]: &Option<Cell<i32>> = {
// ...
}
```
We don't seem to have a test for that so I tried it by hand, it seems to work:
```
const main::promoted[12]: &[&str; 3] = {
let mut _0: &[&str; 3];
let mut _1: [&str; 3];
let mut _2: &str;
let mut _3: &str;
let mut _4: &str;
let mut _5: &str;
bb0: {
_3 = const "b";
_2 = &(*_3);
_5 = const "c";
_4 = &(*_5);
_1 = [const "a", move _2, move _4];
_0 = &_1;
return;
}
}
```
Add a tidy check that checks whether the fluent slugs only appear once
As ``````@Nilstrieb`````` said in https://github.com/rust-lang/rust/pull/121828#issuecomment-1972622855:
> Might make sense to have a tidy check that checks whether the fluent slugs only appear once in the source code and lint for that
there's a tidy check already for sorting
We can get the tidy check error:
```
tidy check
tidy error: /path/to/rust/compiler/rustc_const_eval/messages.ftl: message `const_eval_invalid_align` is not used
tidy error: /path/to/rust/compiler/rustc_lint/messages.ftl: message `lint_trivial_untranslatable_diag` is not used
tidy error: /path/to/rust/compiler/rustc_parse/messages.ftl: message `parse_invalid_literal_suffix` is not used
tidy error: /path/to/rust/compiler/rustc_infer/messages.ftl: message `infer_need_type_info_in_coroutine` is not used
tidy error: /path/to/rust/compiler/rustc_passes/messages.ftl: message `passes_expr_not_allowed_in_context` is not used
tidy error: /path/to/rust/compiler/rustc_passes/messages.ftl: message `passes_layout` is not used
tidy error: /path/to/rust/compiler/rustc_parse/messages.ftl: message `parse_not_supported` is not used
```
r? ``````@Nilstrieb``````
Distinguish between library and lang UB in assert_unsafe_precondition
As described in https://github.com/rust-lang/rust/pull/121583#issuecomment-1963168186, `assert_unsafe_precondition` now explicitly distinguishes between language UB (conditions we explicitly optimize on) and library UB (things we document you shouldn't do, and maybe some library internals assume you don't do).
`debug_assert_nounwind` was originally added to avoid the "only at runtime" aspect of `assert_unsafe_precondition`. Since then the difference between the macros has gotten muddied. This totally revamps the situation.
Now _all_ preconditions shall be checked with `assert_unsafe_precondition`. If you have a precondition that's only checkable at runtime, do a `const_eval_select` hack, as done in this PR.
r? RalfJung
Tweak the way we protect in-place function arguments in interpreters
Use `MPlaceTy` instead of `PlaceTy` in `FnArg` and ignore (copy) locals in an earlier step ("Locals that don't have their address taken are as protected as they can ever be").
This seems to be crucial for tail call support (as they can't refer to caller's locals which are killed when replacing the stack frame).
r? `@RalfJung`
cc `@oli-obk`
see https://github.com/rust-lang/rust/pull/121273#issuecomment-1980210690
Use `MPlaceTy` instead of `PlaceTy` in `FnArg` and ignore (copy) locals in an
earlier step ("Locals that don't have their address taken are as protected as
they can ever be").
This seems to be crucial for tail call support (as they can't refer to caller's
locals which are killed when replacing the stack frame).
Add asm goto support to `asm!`
Tracking issue: #119364
This PR implements asm-goto support, using the syntax described in "future possibilities" section of [RFC2873](https://rust-lang.github.io/rfcs/2873-inline-asm.html#asm-goto).
Currently I have only implemented the `label` part, not the `fallthrough` part (i.e. fallthrough is implicit). This doesn't reduce the expressive though, since you can use label-break to get arbitrary control flow or simply set a value and rely on jump threading optimisation to get the desired control flow. I can add that later if deemed necessary.
r? ``@Amanieu``
cc ``@ojeda``
interpret: avoid a long-lived PlaceTy in stack frames
`PlaceTy` uses a representation that's not very stable under changes to the stack. I'd feel better if we didn't have one in the long-term machine state.
r? `@oli-obk`
Rework `untranslatable_diagnostic` lint
Currently it only checks calls to functions marked with `#[rustc_lint_diagnostics]`. This PR changes it to check calls to any function with an `impl Into<{D,Subd}iagnosticMessage>` parameter. This greatly improves its coverage and doesn't rely on people remembering to add `#[rustc_lint_diagnostics]`. It also lets us add `#[rustc_lint_diagnostics]` to a number of functions that don't have an `impl Into<{D,Subd}iagnosticMessage>`, such as `Diag::span`.
r? ``@davidtwco``
Currently it only checks calls to functions marked with
`#[rustc_lint_diagnostics]`. This commit changes it to check calls to
any function with an `impl Into<{D,Subd}iagMessage>` parameter. This
greatly improves its coverage and doesn't rely on people remembering to
add `#[rustc_lint_diagnostics]`.
The commit also adds `#[allow(rustc::untranslatable_diagnostic)`]
attributes to places that need it that are caught by the improved lint.
These places that might be easy to convert to translatable diagnostics.
Finally, it also:
- Expands and corrects some comments.
- Does some minor formatting improvements.
- Adds missing `DecorateLint` cases to
`tests/ui-fulldeps/internal-lints/diagnostics.rs`.
Rollup of 9 pull requests
Successful merges:
- #121065 (Add basic i18n guidance for `Display`)
- #121744 (Stop using Bubble in coherence and instead emulate it with an intercrate check)
- #121829 (Dummy tweaks (attempt 2))
- #121857 (Implement async closure signature deduction)
- #121894 (const_eval_select: make it safe but be careful with what we expose on stable for now)
- #122014 (Change some attributes to only_local.)
- #122016 (will_wake tests fail on Miri and that is expected)
- #122018 (only set noalias on Box with the global allocator)
- #122028 (Remove some dead code)
r? `@ghost`
`@rustbot` modify labels: rollup
only set noalias on Box with the global allocator
As discovered in https://github.com/rust-lang/miri/issues/3341, `noalias` and custom allocators don't go well together.
rustc can now check whether a Box uses the global allocator. This replaces the previous ad-hoc and rather unprincipled check for a zero-sized allocator.
This is the rustc part of fixing that; Miri will also need a patch.
interpret/cast: make more matches on FloatTy properly exhaustive
Actually implementing these is pretty trivial (at least once all the scalar methods are added, which happens in https://github.com/rust-lang/rust/pull/121926), but I'm staying consistent with the other f16/f128 PRs. Also adding adding all the tests to Miri would be quite a lot of work.
There's probably some way to reduce the code duplication here with more use of generics... but that's a future refactor.^^
r? ```@tgross35```
Now that inlining, mir validation and const eval all use reveal-all, we won't be constraining hidden types here anymore
r? `@compiler-errors`
one bubble down, two more to go
the test is unrelated, just something I noticed would be good to test in both the old solver and the new.
Add stubs in IR and ABI for `f16` and `f128`
This is the very first step toward the changes in https://github.com/rust-lang/rust/pull/114607 and the [`f16` and `f128` RFC](https://rust-lang.github.io/rfcs/3453-f16-and-f128.html). It adds the types to `rustc_type_ir::FloatTy` and `rustc_abi::Primitive`, and just propagates those out as `unimplemented!` stubs where necessary.
These types do not parse yet so there is no feature gate, and it should be okay to use `unimplemented!`.
The next steps will probably be AST support with parsing and the feature gate.
r? `@compiler-errors`
cc `@Nilstrieb` suggested breaking the PR up in https://github.com/rust-lang/rust/pull/120645#issuecomment-1925900572
allow statics pointing to mutable statics
Fixes https://github.com/rust-lang/rust/issues/120450 for good. We can even simplify our checks: no need to specifically go looking for mutable references in const, we can just reject any reference that points to something mutable.
r? `@oli-obk`
Diagnostic renaming
Renaming various diagnostic types from `Diagnostic*` to `Diag*`. Part of https://github.com/rust-lang/compiler-team/issues/722. There are more to do but this is enough for one PR.
r? `@davidtwco`
Rollup of 7 pull requests
Successful merges:
- #121435 (Account for RPITIT in E0310 explicit lifetime constraint suggestion)
- #121490 (Rustdoc: include crate name in links for local primitives)
- #121520 (delay cloning of iterator items)
- #121522 (check that simd_insert/extract indices are in-bounds)
- #121531 (Ignore less tests in debug builds)
- #121539 (compiler/rustc_target/src/spec/base/apple/tests.rs: Avoid unnecessary large move)
- #121542 (update stdarch)
r? `@ghost`
`@rustbot` modify labels: rollup
First, introduce a typedef `DiagnosticArgMap`.
Second, make the `args` field public, and remove the `args` getter and
`replace_args` setter. These were necessary previously because the getter
had a `#[allow(rustc::potential_query_instability)]` attribute, but that
was removed in #120931 when the args were changed from `FxHashMap` to
`FxIndexMap`. (All the other `Diagnostic` fields are public.)
make it possible for outside crates to inspect a mir::ConstValue with the interpreter
For MiniRust we need to convert MIR constant values into MiniRust constant values. However, it's not currently possible to get nice high-level access to the inerts of a `ConstValue`: we can access the raw contents (the allocation / `ScalarInt`), but if it is e.g. of enum type and we want to determine which variant is encoded, we are stuck. There's only `try_destructure_mir_constant_for_user_output` which is meant for diagnostics, so it doesn't fit.
The interpreter has all the APIs to traverse such a value, so we just need a way to get such a ConstValue into an interpreter instance. This adds the public functions necessary to make that happen.
I have a suspicion that quite a few delayed bug paths are impossible to
reach, so I did an experiment.
I converted every `delayed_bug` to a `bug`, ran the full test suite,
then converted back every `bug` that was hit. A surprising number were
never hit.
The next commit will convert some more back, based on human judgment.
Overhaul `Diagnostic` and `DiagnosticBuilder`
Implements the first part of https://github.com/rust-lang/compiler-team/issues/722, which moves functionality and use away from `Diagnostic`, onto `DiagnosticBuilder`.
Likely follow-ups:
- Move things around, because this PR was written to minimize diff size, so some things end up in sub-optimal places. E.g. `DiagnosticBuilder` has impls in both `diagnostic.rs` and `diagnostic_builder.rs`.
- Rename `Diagnostic` as `DiagInner` and `DiagnosticBuilder` as `Diag`.
r? `@davidtwco`
Currently many diagnostic modifier methods are available on both
`Diagnostic` and `DiagnosticBuilder`. This commit removes most of them
from `Diagnostic`. To minimize the diff size, it keeps them within
`diagnostic.rs` but changes the surrounding `impl Diagnostic` block to
`impl DiagnosticBuilder`. (I intend to move things around later, to give
a more sensible code layout.)
`Diagnostic` keeps a few methods that it still needs, like `sub`,
`arg`, and `replace_args`.
The `forward!` macro, which defined two additional methods per call
(e.g. `note` and `with_note`), is replaced by the `with_fn!` macro,
which defines one additional method per call (e.g. `with_note`). It's
now also only used when necessary -- not all modifier methods currently
need a `with_*` form. (New ones can be easily added as necessary.)
All this also requires changing `trait AddToDiagnostic` so its methods
take `DiagnosticBuilder` instead of `Diagnostic`, which leads to many
mechanical changes. `SubdiagnosticMessageOp` gains a type parameter `G`.
There are three subdiagnostics -- `DelayedAtWithoutNewline`,
`DelayedAtWithNewline`, and `InvalidFlushedDelayedDiagnosticLevel` --
that are created within the diagnostics machinery and appended to
external diagnostics. These are handled at the `Diagnostic` level, which
means it's now hard to construct them via `derive(Diagnostic)`, so
instead we construct them by hand. This has no effect on what they look
like when printed.
There are lots of new `allow` markers for `untranslatable_diagnostics`
and `diagnostics_outside_of_impl`. This is because
`#[rustc_lint_diagnostics]` annotations were present on the `Diagnostic`
modifier methods, but missing from the `DiagnosticBuilder` modifier
methods. They're now present.
errors: only eagerly translate subdiagnostics
Subdiagnostics don't need to be lazily translated, they can always be eagerly translated. Eager translation is slightly more complex as we need to have a `DiagCtxt` available to perform the translation, which involves slightly more threading of that context.
This slight increase in complexity should enable later simplifications - like passing `DiagCtxt` into `AddToDiagnostic` and moving Fluent messages into the diagnostic structs rather than having them in separate files (working on that was what led to this change).
r? ```@nnethercote```
allow mutable references in const values when they point to no memory
Fixes https://github.com/rust-lang/rust/issues/120450
The second commit is just some drive-by test suite cleanup.
r? `@oli-obk`
Implement intrinsics with fallback bodies
fixes#93145 (though we can port many more intrinsics)
cc #63585
The way this works is that the backend logic for generating custom code for intrinsics has been made fallible. The only failure path is "this intrinsic is unknown". The `Instance` (that was `InstanceDef::Intrinsic`) then gets converted to `InstanceDef::Item`, which represents the fallback body. A regular function call to that body is then codegenned. This is currently implemented for
* codegen_ssa (so llvm and gcc)
* codegen_cranelift
other backends will need to adjust, but they can just keep doing what they were doing if they prefer (though adding new intrinsics to the compiler will then require them to implement them, instead of getting the fallback body).
cc `@scottmcm` `@WaffleLapkin`
### todo
* [ ] miri support
* [x] default intrinsic name to name of function instead of requiring it to be specified in attribute
* [x] make sure that the bodies are always available (must be collected for metadata)
Subdiagnostics don't need to be lazily translated, they can always be
eagerly translated. Eager translation is slightly more complex as we need
to have a `DiagCtxt` available to perform the translation, which involves
slightly more threading of that context.
This slight increase in complexity should enable later simplifications -
like passing `DiagCtxt` into `AddToDiagnostic` and moving Fluent messages
into the diagnostic structs rather than having them in separate files
(working on that was what led to this change).
Signed-off-by: David Wood <david@davidtw.co>
Store static initializers in metadata instead of the MIR of statics.
This means that adding generic statics would be even more difficult, as we can't evaluate statics from other crates anymore, but the subtle issue I have encountered make me think that having this be an explicit problem is better.
The issue is that
```rust
static mut FOO: &mut u32 = &mut 42;
static mut BAR = unsafe { FOO };
```
gets different allocations, instead of referring to the same one. This is also true for non-static mut, but promotion makes `static FOO: &u32 = &42;` annoying to demo.
Fixes https://github.com/rust-lang/rust/issues/61345
## Why is this being done?
In order to ensure all crates see the same nested allocations (which is the last issue that needs fixing before we can stabilize [`const_mut_refs`](https://github.com/rust-lang/rust/issues/57349)), I am working on creating anonymous (from the Rust side, to LLVM it's like a regular static item) static items for the nested allocations in a static. If we evaluate the static item in a downstream crate again, we will end up duplicating its nested allocations (and in some cases, like the `match` case, even duplicate the main allocation).
Instead we re-use the static's alloc id within the interpreter for its initializer to refer to the `Allocation` that only exists within the interpreter.
For some cases where it's clear that an error has already occurred,
e.g.:
- there's a comment stating exactly that, or
- things like HIR lowering, where we are lowering an error kind
The commit also tweaks some comments around delayed bug sites.
It's only has a single remaining purpose: to ensure that a diagnostic is
printed when `trimmed_def_paths` is used. It's an annoying mechanism:
weak, with odd semantics, badly named, and gets in the way of other
changes.
This commit replaces it with a simpler `must_produce_diag` mechanism,
getting rid of a diagnostic `Level` along the way.
Dejargonize `subst`
In favor of #110793, replace almost every occurence of `subst` and `substitution` from rustc codes, but they still remains in subtrees under `src/tools/` like clippy and test codes (I'd like to replace them after this)
Fix async closures in CTFE
First commit renames `is_coroutine_or_closure` into `is_closure_like`, because `is_coroutine_or_closure_or_coroutine_closure` seems confusing and long.
Second commit fixes some forgotten cases where we want to handle `TyKind::CoroutineClosure` the same as closures and coroutines.
The test exercises the change to `ValidityVisitor::aggregate_field_path_elem` which is the source of #120946, but not the change to `UsedParamsNeedSubstVisitor`, though I feel like it's not that big of a deal. Let me know if you'd like for me to look into constructing a test for the latter, though I have no idea what it'd look like (we can't assert against `TooGeneric` anywhere?).
Fixes#120946
r? oli-obk cc ``@RalfJung``
check_consts: fix duplicate errors, make importance consistent
This is stuff I noticed while working on https://github.com/rust-lang/rust/pull/120932, but it's orthogonal to that PR.
r? ``@oli-obk``
Remove a bunch of dead parameters in functions
Found this kind of issue when working on https://github.com/rust-lang/rust/pull/119650
I wrote a trivial toy lint and manual review to find these.
This also now allows promoteds everywhere to point to 'extern static', because why not?
We still check that constants cannot transitively reach 'extern static' through references.
(We allow it through raw pointers.)
Because it also has a `DiagnosticBuilder` arg, which contains a `dcx`
reference.
Also rename some `builder` variables as `diag`, because that's the usual
name.
Fold pointer operations in GVN
This PR proposes 2 combinations of cast operations in MIR GVN:
- a chain of `PtrToPtr` or `MutToConstPointer` casts can be folded together into a single `PtrToPtr` cast;
- we attempt to evaluate more ptr ops when there is no provenance.
In particular, this allows to read from static slices.
This is not yet sufficient to see through slice operations that use `PtrComponents` (because that's a union), but still a step forward.
r? `@ghost`
static mut: allow mutable reference to arbitrary types, not just slices and arrays
For historical reasons, we allow this:
```rust
static mut ARRAY: &'static mut [isize] = &mut [1];
```
However, we do not allow this:
```rust
static mut INT: &'static mut isize = &mut 1;
```
I think that's terribly inconsistent. I don't care much for `static mut`, but we have to keep it around for backwards compatibility and so we have to keep supporting it properly in the compiler. In recent refactors of how we deal with mutability of data in `static` and `const`, I almost made a fatal mistake since I tested `static mut INT: &'static mut isize = &mut 1` and concluded that we don't allow such `'static` mutable references even inside `static mut`. After all, nobody would expect this to be allowed only for arrays and slices, right?!?? So for the sake of our own sanity, and of whoever else reverse engineers these rules in the future to understand what the Rust compiler accepts or does not accept, I propose that we accept this for all types, not just arrays and slices.
improve normalization of `Pointee::Metadata`
This PR makes it so that `<Wrapper<Tail> as Pointee>::Metadata` is normalized to `<Tail as Pointee>::Metadata` if we don't know `Wrapper<Tail>: Sized`. With that, the trait solver can prove projection predicates like `<Wrapper<Tail> as Pointee>::Metadata == <Tail as Pointee>::Metadata`, which makes it possible to use the metadata APIs to cast between the tail and the wrapper:
```rust
#![feature(ptr_metadata)]
use std::ptr::{self, Pointee};
fn cast_same_meta<T: ?Sized, U: ?Sized>(ptr: *const T) -> *const U
where
T: Pointee<Metadata = <U as Pointee>::Metadata>,
{
let (thin, meta) = ptr.to_raw_parts();
ptr::from_raw_parts(thin, meta)
}
struct Wrapper<T: ?Sized>(T);
fn cast_to_wrapper<T: ?Sized>(ptr: *const T) -> *const Wrapper<T> {
cast_same_meta(ptr)
}
```
Previously, this failed to compile:
```
error[E0271]: type mismatch resolving `<Wrapper<T> as Pointee>::Metadata == <T as Pointee>::Metadata`
--> src/lib.rs:16:5
|
15 | fn cast_to_wrapper<T: ?Sized>(ptr: *const T) -> *const Wrapper<T> {
| - found this type parameter
16 | cast_same_meta(ptr)
| ^^^^^^^^^^^^^^ expected `Wrapper<T>`, found type parameter `T`
|
= note: expected associated type `<Wrapper<T> as Pointee>::Metadata`
found associated type `<T as Pointee>::Metadata`
= note: an associated type was expected, but a different one was found
```
(Yes, you can already do this with `as` casts. But using functions is so much ✨ *safer* ✨, because you can't change the metadata on accident.)
---
This PR essentially changes the built-in impls of `Pointee` from this:
```rust
// before
impl Pointee for u8 {
type Metadata = ();
}
impl Pointee for [u8] {
type Metadata = usize;
}
// ...
impl Pointee for Wrapper<u8> {
type Metadata = ();
}
impl Pointee for Wrapper<[u8]> {
type Metadata = usize;
}
// ...
// This impl is only selected if `T` is a type parameter or unnormalizable projection or opaque type.
fallback impl<T: ?Sized> Pointee for Wrapper<T>
where
Wrapper<T>: Sized
{
type Metadata = ();
}
// This impl is only selected if `T` is a type parameter or unnormalizable projection or opaque type.
fallback impl<T /*: Sized */> Pointee for T {
type Metadata = ();
}
```
to this:
```rust
// after
impl Pointee for u8 {
type Metadata = ();
}
impl Pointee for [u8] {
type Metadata = usize;
}
// ...
impl<T: ?Sized> Pointee for Wrapper<T> {
// in the old solver this will instead project to the "deep" tail directly,
// e.g. `Wrapper<Wrapper<T>>::Metadata = T::Metadata`
type Metadata = <T as Pointee>::Metadata;
}
// ...
// This impl is only selected if `T` is a type parameter or unnormalizable projection or opaque type.
fallback impl<T /*: Sized */> Pointee for T {
type Metadata = ();
}
```
Fix more `ty::Error` ICEs in MIR passes
Fixes#120791 - Add a check for `ty::Error` in the `ByMove` coroutine pass
Fixes#120816 - Add a check for `ty::Error` in the MIR validator
Also a drive-by fix for a FIXME I had asked oli to add
r? oli-obk
Invert diagnostic lints.
That is, change `diagnostic_outside_of_impl` and `untranslatable_diagnostic` from `allow` to `deny`, because more than half of the compiler has been converted to use translated diagnostics.
This commit removes more `deny` attributes than it adds `allow` attributes, which proves that this change is warranted.
r? ````@davidtwco````
various const interning cleanups
After #119044 I noticed that some things can be simplified and refactored.
This is also a requirement for https://github.com/rust-lang/rust/pull/116564 as there we'll need to treat the base allocation differently from the others
r? ````@RalfJung````
update indirect structural match lints to match RFC and to show up for dependencies
This is a large step towards implementing https://github.com/rust-lang/rfcs/pull/3535.
We currently have five lints related to "the structural match situation":
- nontrivial_structural_match
- indirect_structural_match
- pointer_structural_match
- const_patterns_without_partial_eq
- illegal_floating_point_literal_pattern
This PR concerns the first 3 of them. (The 4th already is set up to show for dependencies, and the 5th is removed by https://github.com/rust-lang/rust/pull/116284.) nontrivial_structural_match is being removed as per the RFC; the other two are enabled to show up in dependencies.
Fixes https://github.com/rust-lang/rust/issues/73448 by removing the affected analysis.
That is, change `diagnostic_outside_of_impl` and
`untranslatable_diagnostic` from `allow` to `deny`, because more than
half of the compiler has be converted to use translated diagnostics.
This commit removes more `deny` attributes than it adds `allow`
attributes, which proves that this change is warranted.
Because it's almost always static.
This makes `impl IntoDiagnosticArg for DiagnosticArgValue` trivial,
which is nice.
There are a few diagnostics constructed in
`compiler/rustc_mir_build/src/check_unsafety.rs` and
`compiler/rustc_mir_transform/src/errors.rs` that now need symbols
converted to `String` with `to_string` instead of `&str` with `as_str`,
but that' no big deal, and worth it for the simplifications elsewhere.
Error codes are integers, but `String` is used everywhere to represent
them. Gross!
This commit introduces `ErrCode`, an integral newtype for error codes,
replacing `String`. It also introduces a constant for every error code,
e.g. `E0123`, and removes the `error_code!` macro. The constants are
imported wherever used with `use rustc_errors::codes::*`.
With the old code, we have three different ways to specify an error code
at a use point:
```
error_code!(E0123) // macro call
struct_span_code_err!(dcx, span, E0123, "msg"); // bare ident arg to macro call
\#[diag(name, code = "E0123")] // string
struct Diag;
```
With the new code, they all use the `E0123` constant.
```
E0123 // constant
struct_span_code_err!(dcx, span, E0123, "msg"); // constant
\#[diag(name, code = E0123)] // constant
struct Diag;
```
The commit also changes the structure of the error code definitions:
- `rustc_error_codes` now just defines a higher-order macro listing the
used error codes and nothing else.
- Because that's now the only thing in the `rustc_error_codes` crate, I
moved it into the `lib.rs` file and removed the `error_codes.rs` file.
- `rustc_errors` uses that macro to define everything, e.g. the error
code constants and the `DIAGNOSTIC_TABLES`. This is in its new
`codes.rs` file.
Remove unused/unnecessary features
~~The bulk of the actual code changes here is replacing try blocks with equivalent closures. I'm not entirely sure that's a good idea since it may have perf impact, happy to revert if that's the case/the change is unwanted.~~
I also removed a lot of `recursion_limit = "256"` since everything seems to build fine without that and most don't have any comment justifying it.
remove StructuralEq trait
The documentation given for the trait is outdated: *all* function pointers implement `PartialEq` and `Eq` these days. So the `StructuralEq` trait doesn't really seem to have any reason to exist any more.
One side-effect of this PR is that we allow matching on some consts that do not implement `Eq`. However, we already allowed matching on floats and consts containing floats, so this is not new, it is just allowed in more cases now. IMO it makes no sense at all to allow float matching but also sometimes require an `Eq` instance. If we want to require `Eq` we should adjust https://github.com/rust-lang/rust/pull/115893 to check for `Eq`, and rule out float matching for good.
Fixes https://github.com/rust-lang/rust/issues/115881
Replacement of #114390: Add new intrinsic `is_var_statically_known` and optimize pow for powers of two
This adds a new intrinsic `is_val_statically_known` that lowers to [``@llvm.is.constant.*`](https://llvm.org/docs/LangRef.html#llvm-is-constant-intrinsic).` It also applies the intrinsic in the int_pow methods to recognize and optimize the idiom `2isize.pow(x)`. See #114390 for more discussion.
While I have extended the scope of the power of two optimization from #114390, I haven't added any new uses for the intrinsic. That can be done in later pull requests.
Note: When testing or using the library, be sure to use `--stage 1` or higher. Otherwise, the intrinsic will be a noop and the doctests will be skipped. If you are trying out edits, you may be interested in [`--keep-stage 0`](https://rustc-dev-guide.rust-lang.org/building/suggested.html#faster-builds-with---keep-stage).
Fixes#47234Resolves#114390
`@Centri3`
Remove all ConstPropNonsense
We track all locals and projections on them ourselves within the const propagator and only use the InterpCx to actually do some low level operations or read from constants (via `OpTy` we get for said constants).
This helps moving the const prop lint out from the normal pipeline and running it just based on borrowck information. This in turn allows us to make progress on https://github.com/rust-lang/rust/pull/108730#issuecomment-1875557745
there are various follow up cleanups that can be done after this PR (e.g. not matching on Rvalue twice and doing binop checks twice), but lets try landing this one first.
r? `@RalfJung`
Return a finite number of AllocIds per ConstAllocation in Miri
Before this, every evaluation of a const slice would produce a new AllocId. So in Miri, this program used to have unbounded memory use:
```rust
fn main() {
loop {
helper();
}
}
fn helper() {
"ouch";
}
```
Every trip around the loop creates a new AllocId which we need to keep track of a base address for. And the provenance GC can never clean up that AllocId -> u64 mapping, because the AllocId is for a const allocation which will never be deallocated.
So this PR moves the logic of producing an AllocId for a ConstAllocation to the Machine trait, and the implementation that Miri provides will only produce 16 AllocIds for each allocation. The cache is also keyed on the Instance that the const is evaluated in, so that equal consts evaluated in two functions will have disjoint base addresses.
r? RalfJung
Do not normalize closure signature when building `FnOnce` shim
It is not necessary to normalize the closure signature when building an `FnOnce` shim for an `Fn`/`FnMut` closure. That closure shim is just calling `FnMut::call_mut(&mut self)` anyways.
It's also somewhat sketchy that we were ever doing this to begin with, since we're normalizing with a `ParamEnv::reveal_all()` param-env, which is definitely not right with possibly polymorphic substs.
This cuts out a tiny bit of unnecessary work in `Instance::resolve` and simplifies the signature because now we can unconditionally return an `Instance`.
