Detect when suggested paths enter extern crates more rigorously
When reporting resolution errors, the compiler tries to avoid suggesting importing inaccessible paths from other crates. However, the search for suggestions only recognized when it was entering a crate root directly, and so failed to recognize a path like `crate::module::private_item`, where `module` was imported from another crate with `use other_crate::module`, as entering another crate.
Fixes#80079Fixes#84081
Issue 81508 fix
Fix#81508
**Problem**: When variable name is used incorrectly as path, error and warning point to undeclared/unused name, when in fact the name is used, just incorrectly (should be used as a variable, not part of a path).
**Summary for fix**: When path resolution errs, diagnostics checks for variables in ```ValueNS``` that have the same name (e.g., variable rather than path named Foo), and adds additional suggestion that user may actually intend to use the variable name rather than a path.
The fix does not suppress or otherwise change the *warning* that results. I did not find a straightforward way in the code to modify this, but would love to make changes here as well with any guidance.
Don't concatenate binders across types
Partially addresses #83737
There's actually two issues that I uncovered in #83737. The first is that we are concatenating bound vars across types, i.e. in
```
F: Fn(&()) -> &mut (dyn Future<Output = ()> + Unpin)
```
the bound vars on `Future` get set as `for<anon>` since those are the binders on `Fn(&()`. This is obviously wrong, since we should only concatenate directly nested trait refs. This is solved here by introducing a new `TraitRefBoundary` scope, that we put around the "syntactical" trait refs and basically don't allow concatenation across.
Now, this alone *shouldn't* be a super terrible problem. At least not until you consider the other issue, which is a much more elusive and harder to design a "perfect" fix. A repro can be seen in:
```
use core::future::Future;
async fn handle<F>(slf: &F)
where
F: Fn(&()) -> &mut (dyn for<'a> Future<Output = ()> + Unpin),
{
(slf)(&()).await;
}
```
Notice the `for<'a>` around `Future`. Here, `'a` is unused, so the `for<'a>` Binder gets changed to a `for<>` Binder in the generator witness, but the "local decl" still has it. This has heavy intersections with region anonymization and erasing. Luckily, it's not *super* common to find this unique set of circumstances. It only became apparently because of the first issue mentioned here. However, this *is* still a problem, so I'm leaving #83737 open.
r? `@nikomatsakis`
Previously, the types looked like this:
- None means this is not an associated item (but may be a variant field)
- Some(Err) means this is known to be an error. I think the only way that can happen is if it resolved and but you had your own anchor.
- Some(Ok(_, None)) was impossible.
Now, this returns a nested Option and does the error handling and
fiddling with the side channel in the caller. As a side-effect, it also
removes duplicate error handling.
This has one small change in behavior, which is that
`resolve_primitive_associated_item` now goes through `variant_field` if
it fails to resolve something. This is not ideal, but since it will be
quickly rejected anyway, I think the performance hit is worth the
cleanup.
This also fixes a bug where struct fields would forget to set the side
channel, adds a test for the bug, and ignores `private_intra_doc_links`
in rustc_resolve (since it's always documented with
--document-private-items).
resolve: Partially unify early and late scope-relative identifier resolution
Reuse `early_resolve_ident_in_lexical_scope` instead of a chunk of code in `resolve_ident_in_lexical_scope` doing the same job.
`early_resolve_ident_in_lexical_scope`/`visit_scopes` had to be slightly extended to be able to 1) start from a specific module instead of the current parent scope and 2) report one deprecation lint.
`early_resolve_ident_in_lexical_scope` still doesn't support walking through "ribs", that part is left in `resolve_ident_in_lexical_scope` (moreover, I'm pretty sure it's buggy, but that's a separate issue, cc https://github.com/rust-lang/rust/issues/52389 at least).
Add function core::iter::zip
This makes it a little easier to `zip` iterators:
```rust
for (x, y) in zip(xs, ys) {}
// vs.
for (x, y) in xs.into_iter().zip(ys) {}
```
You can `zip(&mut xs, &ys)` for the conventional `iter_mut()` and
`iter()`, respectively. This can also support arbitrary nesting, where
it's easier to see the item layout than with arbitrary `zip` chains:
```rust
for ((x, y), z) in zip(zip(xs, ys), zs) {}
for (x, (y, z)) in zip(xs, zip(ys, zs)) {}
// vs.
for ((x, y), z) in xs.into_iter().zip(ys).zip(xz) {}
for (x, (y, z)) in xs.into_iter().zip((ys.into_iter().zip(xz)) {}
```
It may also format more nicely, especially when the first iterator is a
longer chain of methods -- for example:
```rust
iter::zip(
trait_ref.substs.types().skip(1),
impl_trait_ref.substs.types().skip(1),
)
// vs.
trait_ref
.substs
.types()
.skip(1)
.zip(impl_trait_ref.substs.types().skip(1))
```
This replaces the tuple-pair `IntoIterator` in #78204.
There is prior art for the utility of this in [`itertools::zip`].
[`itertools::zip`]: https://docs.rs/itertools/0.10.0/itertools/fn.zip.html
Ban custom inner attributes in expressions and statements
Split out from https://github.com/rust-lang/rust/pull/82608
Custom inner attributes are unstable, so this won't break any stable users.
This allows us to speed up token collection, and avoid a redundant call to `collect_tokens_no_attrs` when parsing an `Expr` that has outer attributes.
r? `@petrochenkov`
This currently creates a field which is always false on GenericParamDefKind for future use when
consts are permitted to have defaults
Update const_generics:default locations
Previously just ignored them, now actually do something about them.
Fix using type check instead of value
Add parsing
This adds all the necessary changes to lower const-generics defaults from parsing.
Change P<Expr> to AnonConst
This matches the arguments passed to instantiations of const generics, and makes it specific to
just anonymous constants.
Attempt to fix lowering bugs
StructField -> FieldDef ("field definition")
Field -> ExprField ("expression field", not "field expression")
FieldPat -> PatField ("pattern field", not "field pattern")
Also rename visiting and other methods working on them.
Custom error on literal names from other languages
This detects all Java literal types and all single word C data types, and suggests the corresponding Rust literal type.
Store HIR attributes in a side table
Same idea as #72015 but for attributes.
The objective is to reduce incr-comp invalidations due to modified attributes.
Notably, those due to modified doc comments.
Implementation:
- collect attributes during AST->HIR lowering, in `LocalDefId -> ItemLocalId -> &[Attributes]` nested tables;
- access the attributes through a `hir_owner_attrs` query;
- local refactorings to use this access;
- remove `attrs` from HIR data structures one-by-one.
Change in behaviour:
- the HIR visitor traverses all attributes at once instead of parent-by-parent;
- attribute arrays are sometimes duplicated: for statements and variant constructors;
- as a consequence, attributes are marked as used after unused-attribute lint emission to avoid duplicate lints.
~~Current bug: the lint level is not correctly applied in `std::backtrace_rs`, triggering an unused attribute warning on `#![no_std]`. I welcome suggestions.~~
Don't hardcode the `v1` prelude in diagnostics, to allow for new preludes.
Instead of looking for `std::prelude::v1`, this changes the two places where that was hardcoded to look for `std::prelude::<anything>` instead.
This is needed for https://github.com/rust-lang/rust/pull/82217.
r? `@estebank`
resolve: Reduce scope of `pub_use_of_private_extern_crate` deprecation lint
This lint was deny-by-default since July 2017, crater showed 7 uses on crates.io back then (https://github.com/rust-lang/rust/pull/42894#issuecomment-311921147).
Unfortunately, the construction `pub use foo as bar` where `foo` is `extern crate foo;` was used by an older version `bitflags`, so turning it into an error causes too many regressions.
So, this PR reduces the scope of the lint instead of turning it into a hard error, and only turns some more rarely used components of it into errors.
Add #[rustc_legacy_const_generics]
This is the first step towards removing `#[rustc_args_required_const]`: a new attribute is added which rewrites function calls of the form `func(a, b, c)` to `func::<{b}>(a, c)`. This allows previously stabilized functions in `stdarch` which use `rustc_args_required_const` to use const generics instead.
This new attribute is not intended to ever be stabilized, it is only intended for use in `stdarch` as a replacement for `#[rustc_args_required_const]`.
```rust
#[rustc_legacy_const_generics(1)]
pub fn foo<const Y: usize>(x: usize, z: usize) -> [usize; 3] {
[x, Y, z]
}
fn main() {
assert_eq!(foo(0 + 0, 1 + 1, 2 + 2), [0, 2, 4]);
assert_eq!(foo::<{1 + 1}>(0 + 0, 2 + 2), [0, 2, 4]);
}
```
r? `@oli-obk`
Fix ICE caused by suggestion with no code substitutions
Change suggestion logic to filter and checking _before_ creating
specific resolution suggestion.
Assert earlier that suggestions contain code substitions to make it
easier in the future to debug invalid uses. If we find this becomes too
noisy in the wild, we can always make the emitter resilient to these
cases and remove the assertions.
Fix#78651.
Crate root is sufficiently different from `mod` items, at least at syntactic level.
Also remove customization point for "`mod` item or crate root" from AST visitors.
Only store a LocalDefId in some HIR nodes
Some HIR nodes are guaranteed to be HIR owners: Item, TraitItem, ImplItem, ForeignItem and MacroDef.
As a consequence, we do not need to store the `HirId`'s `local_id`, and we can directly store a `LocalDefId`.
This allows to avoid a bit of the dance with `tcx.hir().local_def_id` and `tcx.hir().local_def_id_to_hir_id` mappings.
Change suggestion logic to filter and checking _before_ creating
specific resolution suggestion.
Assert earlier that suggestions contain code substitions to make it
easier in the future to debug invalid uses. If we find this becomes too
noisy in the wild, we can always make the emitter resilient to these
cases and remove the assertions.
Fix#78651.
Special treatment like this was necessary before `pub(restricted)` had been implemented and only two visibilities existed - `pub` and non-`pub`.
Now it's no longer necessary and the desired behavior follows from `pub(restricted)`-style visibilities naturally assigned to enum variants and trait items.
Refactor `PrimitiveTypeTable` for Clippy
I removed `PrimitiveTypeTable` and added `PrimTy::ALL` and `PrimTy::from_name` in its place. This allows Clippy to use `PrimTy::from_name` for the `builtin_type_shadow` lint, and a `const` list of primitive types is deleted from Clippy code (the goal). All changes should be a little faster, if anything.
Box the biggest ast::ItemKind variants
This PR is a different approach on https://github.com/rust-lang/rust/pull/81400, aiming to save memory in humongous ASTs.
The three affected item kind enums are:
- `ast::ItemKind` (208 -> 112 bytes)
- `ast::AssocItemKind` (176 -> 72 bytes)
- `ast::ForeignItemKind` (176 -> 72 bytes)
cc #79813
This PR adds an allow-by-default future-compatibility lint
`SEMICOLON_IN_EXPRESSIONS_FROM_MACROS`. It fires when a trailing semicolon in a
macro body is ignored due to the macro being used in expression
position:
```rust
macro_rules! foo {
() => {
true; // WARN
}
}
fn main() {
let val = match true {
true => false,
_ => foo!()
};
}
```
The lint takes its level from the macro call site, and
can be allowed for a particular macro by adding
`#[allow(semicolon_in_expressions_from_macros)]`.
The lint is set to warn for all internal rustc crates (when being built
by a stage1 compiler). After the next beta bump, we can enable
the lint for the bootstrap compiler as well.
When encountering a name `a` that isn't resolved, but a label `'a` is
found in the current ribs, only suggest `'a` if this name is the value
expression of a `break` statement.
Solve FIXME.
Initialize a few variables directly
Currently they are declared as `mut`, get initialized to a default value, and
then possibly overwritten.
By initializing to the final value directly, they don't need to be `mut` and
it's clear that they don't get mutated elsewhere later on.
resolve: Simplify collection of traits in scope
"Traits in scope" for a given location are collected by walking all scopes in type namespace, collecting traits in them and pruning traits that don't have an associated item with the given name and namespace.
Previously we tried to prune traits using some kind of hygienic resolution for associated items, but that was complex and likely incorrect, e.g. in #80762 correction to visibilites of trait items caused some traits to not be in scope anymore.
I previously had some comments and concerns about this in https://github.com/rust-lang/rust/pull/65351.
In this PR we are doing some much simpler pruning based on `Symbol` and `Namespace` comparisons, it should be enough to throw away 99.9% of unnecessary traits.
It is not necessary for pruning to be precise because for trait aliases, for example, we don't do any pruning at all, and precise hygienic resolution for associated items needs to be done in typeck anyway.
The somewhat unexpected effect is that trait imports introduced by macros 2.0 now bring traits into scope due to the removed hygienic check on associated item names.
I'm not sure whether it is desirable or not, but I think it's acceptable for now.
The old check was certainly incorrect because macros 2.0 did bring trait aliases into scope.
If doing this is not desirable, then we should come up with some other way to avoid bringing traits from macros 2.0 into scope, that would accommodate for trait aliases as well.
---
The PR also contains a couple of pure refactorings
- Scope walk is done by using `visit_scopes` instead of a hand-rolled version.
- Code is restructured to accomodate for rustdoc that also wants to query traits in scope, but doesn't want to filter them by associated items at all.
r? ```@matthewjasper```
resolve: Reject ambiguity built-in attr vs different built-in attr
Fixes https://github.com/rust-lang/rust/issues/79798.
Resolution ensures that inert attributes cannot be used through imports like this, but built-in attributes don't go through initial resolution (only through resolution validation), so we have to keep some extra data (the built-in attribute name) to prevent it from happening.
Currently they are declared as `mut`, get initialized to a default value, and
then possibly overwritten.
By initializing to the final value directly, they don't need to be `mut` and
it's clear that they don't get mutated elsewhere later on.
Update tests of "unused_lifetimes" lint for async functions and corresponding source code
Before this PR the following code would cause an error:
```
#![deny(unused_lifetimes)]
async fn f<'a>(_: &'a i32) {}
fn main() {}
```
It was happening because of the desugaring of return type in async functions. As a result of the desugaring, the return type contains all lifetimes involved in the function signature. And these lifetimes were interpreted separately from the same in the function scope => so they are unused.
Now, all lifetimes from the return type are interpreted as used. It is also not perfect, but at least this lint doesn't cause wrong errors now.
This PR connected to issues #78522, #77217
Rework diagnostics for wrong number of generic args (fixes#66228 and #71924)
This PR reworks the `wrong number of {} arguments` message, so that it provides more details and contextual hints.
Separate out a `hir::Impl` struct
This makes it possible to pass the `Impl` directly to functions, instead
of having to pass each of the many fields one at a time. It also
simplifies matches in many cases.
See `rustc_save_analysis::dump_visitor::process_impl` or `rustdoc::clean::clean_impl` for a good example of how this makes `impl`s easier to work with.
r? `@petrochenkov` maybe?
This makes it possible to pass the `Impl` directly to functions, instead
of having to pass each of the many fields one at a time. It also
simplifies matches in many cases.
resolve: Simplify built-in macro table
We don't use full `SyntaxExtension`s from the table, only `SyntaxExtensionKind`s, and `Ident` in `register_builtin_macro` always had dummy span. This PR removes unnecessary data from the table and related function signatures.
Noticed when reviewing #80850.
resolve: Scope visiting doesn't need an `Ident`
Resolution scope visitor (`fn visit_scopes`) currently takes an `Ident` parameter, but it doesn't need a full identifier, or even its span, it only needs the `SyntaxContext` part.
The `SyntaxContext` part is necessary because scope visitor has to jump to macro definition sites, so it has to be directed by macro expansion information somehow.
I think it's clearer to pass only the necessary part.
Yes, usually visiting happens as a part of an identifier resolution, but in cases like collecting traits in scope (#80765) or collecting typo suggestions that's not the case.
r? `@matthewjasper`
Allow #[rustc_builtin_macro = "name"]
This adds the option of specifying the name of a builtin macro in the `#[rustc_builtin_macro]` attribute: `#[rustc_builtin_macro = "name"]`.
This makes it possible to have both `std::panic!` and `core::panic!` as a builtin macro, by using different builtin macro names for each. This is needed to implement the edition-specific behaviour of the panic macros of RFC 3007.
Also removes `SyntaxExtension::is_derive_copy`, as the macro name (e.g. `sym::Copy`) is now tracked and provides that information directly.
r? ``@petrochenkov``
Use correct span for structured suggestion
On structured suggestion for `let` -> `const` and `const` -> `let`, use
a proper `Span` and update tests to check the correct application.
Follow up to #80012.
This makes it possible to have both std::panic and core::panic as a
builtin macro, by using different builtin macro names for each.
Also removes SyntaxExtension::is_derive_copy, as the macro name (e.g.
sym::Copy) is now tracked and provides that information directly.
On structured suggestion for `let` -> `const` and `const` -> `let`, use
a proper `Span` and update tests to check the correct application.
Follow up to #80012.
* Rename `ModuleData.normal_ancestor_id` to `nearest_parent_mod`
`normal_ancestor_id` is a very confusing name if you don't already
understand what it means. Adding docs helps, but using a clearer and
more obvious name is also important.
* Rename `Resolver::nearest_mod_parent` to `nearest_parent_mod`
* Add more docs
- Adds optional default values to const generic parameters in the AST
and HIR
- Parses these optional default values
- Adds a `const_generics_defaults` feature gate
