Stabilize span_open() and span_close().
This proposes to stabilize `Group::span_open()` and `Group::span_close()`.
These are part of the `proc_macro_span` feature gate tracked in https://github.com/rust-lang/rust/issues/54725
Most of the features gated behind `proc_macro_span` are about source location information (file path, line and column information), expansion information (parent()), source_text(), etc. Those are not ready for stabilizaiton. However, getting the span of the `(` and `)` separately instead of only of the entire `(...)` can be very useful in proc macros, and doesn't seem blocked on anything that all the other parts of `proc_macro_span` are blocked on. So, this renames the feature gate for those two functions to `proc_macro_group_span` and stabilizes them.
This was unsound since a panic in a.next_back() would result in the
length not being updated which would then lead to the same element
being revisited in the side-effect preserving code.
Add has_data_left() to BufRead
This is a continuation of #40747 and also addresses #40745. The problem with the previous PR was that it had "eof" in its method name. This PR uses a more descriptive method name, but I'm open to changing it.
Rely on libc for correct integer types in os/unix/net/ancillary.rs.
This PR is a small maintainability improvement. It simplifies `unix/net/ancillary.rs` in `std` by removing the `cfg_ifs` for casting to the correct integer type, and just rely on libc to define the struct correctly.
Specialize `io::Bytes::size_hint` for more types
Improve the result of `<io::Bytes as Iterator>::size_hint` for some readers. I did not manage to specialize `SizeHint` for `io::Cursor`
Side question: would it be interesting for `io::Read` to have an optional `size_hint` method ?
Linear interpolation
#71016 is a previous attempt at implementation that was closed by the author. I decided to reuse the feature request issue (#71015) as a tracking issue. A member of the rust-lang org will have to edit the original post to be formatted correctly as I am not the issue's original author.
The common name `lerp` is used because it is the term used by most code in a wide variety of contexts; it also happens to be the recently chosen name of the function that was added to C++20.
To ensure symmetry as a method, this breaks the usual ordering of the method from `lerp(a, b, t)` to `t.lerp(a, b)`. This makes the most sense to me personally, and there will definitely be discussion before stabilisation anyway.
Implementing lerp "correctly" is very dififcult even though it's a very common building-block used in all sorts of applications. A good prior reading is [this proposal](http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2018/p0811r2.html#linear-interpolation) for the C++20 lerp which talks about the various guarantees, which I've simplified down to:
1. Exactness: `(0.0).lerp(start, end) == start` and `(1.0).lerp(start, end) == end`
2. Consistency: `anything.lerp(x, x) == x`
3. Monotonicity: once you go up don't go down
Fun story: the version provided in that proposal, from what I understand, isn't actually monotonic.
I messed around with a *lot* of different lerp implementations because I kind of got a bit obsessed and I ultimately landed on one that uses the fused `mul_add` instruction. Floating-point lerp lore is hard to come by, so, just trust me when I say that this ticks all the boxes. I'm only 90% certain that it's monotonic, but I'm sure that people who care deeply about this will be there to discuss before stabilisation.
The main reason for using `mul_add` is that, in general, it ticks more boxes with fewer branches to be "correct." Although it will be slower on architectures without the fused `mul_add`, that's becoming more and more rare and I have a feeling that most people who will find themselves needing `lerp` will also have an efficient `mul_add` instruction available.
Document the associativity of `Iterator::fold` and
`DoubleEndedIterator::rfold` and add examples demonstrating this.
Add links to direct users to the fold of the opposite associativity.
Make `sum()` and `product()` documentation hyperlinks refer to `Iterator` methods.
The previous linking seemed confusing: within "the sum() method on iterators", "sum()" was linked to `Sum::sum`, not `Iterator::sum`, even though the sentence is talking about the latter. I have rewritten the sentence to be, I believe, clearer, as well as changing the link destinations; applying the same change to the `Product` documentation as well as `Sum`.
I reviewed other traits in the same module and did not see similar issues, and previewed the results using `./x.py doc library/std`.
Remove methods under Implementors on trait pages
As discussed at https://github.com/rust-lang/rust/issues/84326#issuecomment-842652412.
On a trait page, the "Implementors" section currently lists all methods of each implementor. That duplicates the method definitions on the trait itself, and is usually not very useful. So the implementors are collapsed by default. This PR changes rustdoc to just not render them at all. Any documentation specific to an implementor can be found by clicking through to the implementor's page.
This moves the "portability" info inside the `<summary>` tags so it is still visible on trait pages (as originally implemented in #79201). That also means it will be visible on struct/enum pages when methods are collapsed.
Add `#[doc(hidden)]` to all implementations of `Iterator::__iterator_get_unchecked` that didn't already have it. Otherwise, due to #86145, the structs/enums with those implementations would generate documentation for them, and that documentation would have a broken link into the Iterator page. Those links were already "broken" but not detected by the link-checker, because they pointed to one of the Implementors on the Iterator page, which happened to have the right anchor name.
This reduces the Read trait's page size from 128kB to 68kB (uncompressed) and from 12,125 bytes to 9,989 bytes (gzipped
Demo:
https://hoffman-andrews.com/rust/remove-methods-implementors/std/string/struct.String.html#trait-implementationshttps://hoffman-andrews.com/rust/remove-methods-implementors/std/io/trait.Read.html#implementors
r? `@GuillaumeGomez`
Rename IoSlice(Mut)::advance to advance_slice and add IoSlice(Mut)::advance
Also changes the signature of `advance_slice` to accept a `&mut &mut [IoSlice]`, not returning anything. This will better match the `IoSlice::advance` function.
Updates https://github.com/rust-lang/rust/issues/62726.
This method on the Iterator trait is doc(hidden), and about half of
implementations were doc(hidden). This adds the attribute to the
remaining implementations.
The previous linking seemed confusing: within "the sum() method on
iterators", "sum()" was linked to `Sum::sum`, not `Iterator::sum`, even
though the sentence is talking about the latter.
I have rewritten the sentence to be, I believe, clearer, as well as
changing the link destinations; applying the same change to the
`Product` documentation as well as `Sum`.
Link reference in `dyn` keyword documentation
The "read more" sentence formatted "object safety" as inline code
instead of providing a link to more information. This PR adds a link
to the Reference about this matter, as well as the page regarding trait
objects.
---
We could also put these links in the very first line (instead of the link to the
Book) and in the first paragraph which mentions the "object safe" requirement.
Personally, I think it's good to keep the link to the Book up-front as it's more
accessible than the Reference.
Mention the `Borrow` guarantee on the `Hash` implementations for Arrays and `Vec`
To remind people like me who forget about it and send PRs to make them different, and to (probably) get a test failure if the code is changed to no longer uphold it.
optimize Eq implementation for paths
Filesystems generally have a tree-ish structure which means paths are more likely to share a prefix than a suffix. Absolute paths are especially prone to share long prefixes.
quick benchmark consisting of a search through through a vec containing the absolute paths of all (1850) files in `compiler/`:
```
# old
test path::tests::bench_path_cmp ... bench: 227,407 ns/iter (+/- 2,162)
# new
test path::tests::bench_path_cmp ... bench: 64,976 ns/iter (+/- 1,142)
```
Updates `Clone` docs for `Copy` comparison.
Quite a few people (myself included) have come under the impression that the difference between `Copy` and `Clone` is that `Copy` is cheap and `Clone` is expensive, where the actual difference is that `Copy` constrains the type to bit-wise copying, and `Clone` allows for more expensive operations. The source of this misconception is in the `Clone` docs, where the following line is in the description:
> Differs from `Copy` in that `Copy` is implicit and extremely inexpensive, while `Clone` is always explicit and may or may not be expensive.
The `Clone` documentation page also comes up before the `Copy` page on google when searching for "the difference between `Clone` and `Copy`".
This PR updates the documentation to clarify that "extremely inexpensive" means an "inexpensive bit-wise copy" to hopefully prevent future rust users from falling into this misunderstanding.
Remove `Ipv6Addr::is_unicast_site_local`
Removes the unstable method `Ipv6Addr::is_unicast_site_local`, see also #85604 where I have tried to summarize related discussion so far.
Unicast site-local addresses (`fec0::/10`) were deprecated in [IETF RFC #3879](https://datatracker.ietf.org/doc/html/rfc3879), see also [RFC #4291 Section 2.5.7](https://datatracker.ietf.org/doc/html/rfc4291#section-2.5.7). Any new implementation must no longer support the special behaviour of site-local addresses. This is mentioned in the docs of `is_unicast_site_local` and already implemented in `is_unicast_global`, which considers addresses in `fec0::/10` to have global scope, thus overlapping with `is_unicast_site_local`.
Given that RFC #3879 was published in 2004, long before Rust existed, and it is specified that any new implementation must no longer support the special behaviour of site-local addresses, I don't see how a user would ever have a need for `is_unicast_site_local`. It is also confusing that currently both `is_unicast_site_local` and `is_unicast_global` can be `true` for an address, but an address can actually only have a single scope. The deprecating RFC mentions that Site-Local scope was confusing to work with and that the classification of an address as either Link-Local or Global better matches the mental model of users.
There has been earlier discussion of removing `is_unicast_site_local` (https://github.com/rust-lang/rust/pull/60145#issuecomment-485970669) which decided against it, but that had the incorrect assumption that the method was already stable; it is not. (This confusion arose from the placement of the unstable attribute on the entire module, instead of on individual methods, resolved in #85672)
r? `@joshtriplett` as reviewer of all the related PRs
Integrate binary search codes of binary_search_by and partition_point
For now partition_point has own binary search code piece.
It is because binary_search_by had called the comparer more times and the author (=me) wanted to avoid it.
However, now binary_search_by uses the comparer minimum times. (#74024)
So it's time to integrate them.
The appearance of the codes are a bit different but both use completely same logic.
Stabilize {std, core}::prelude::rust_*.
This stabilizes the `{core, std}::prelude::{rust_2015, rust_2018, rust_2021}` modules.
The usage of these modules as the prelude in those editions was already stabilized. This just stabilizes the modules themselves, making it possible for a user to explicitly refer to them.
Tracking issue: https://github.com/rust-lang/rust/issues/85684
FCP on the RFC that included this finished here: https://github.com/rust-lang/rfcs/pull/3114#issuecomment-840577395
Add functions `Duration::try_from_secs_{f32, f64}`
These functions allow constructing a Duration from a floating point value that could be out of range without panicking.
Tracking issue: #83400
Explain non-dropped sender recv in docs
Original senders that are still hanging around could cause
Receiver::recv to not block since this is a potential footgun
for beginners, clarify more on this in the docs for readers to
be aware about it.
Maybe it would be better to show an example of the pattern where `drop(tx)` is used when it is being cloned multiple times? Although I have seen it in quite a few articles but I am surprised that this part is not very clear with the current words without careful reading.
> If the corresponding Sender has disconnected, or it disconnects while this call is blocking, this call will wake up and return Err to indicate that no more messages can ever be received on this channel. However, since channels are buffered, messages sent before the disconnect will still be properly received.
Some words there may seemed similar if I carefully read and relate it but if I am new, I probably does not know "drop" makes it "disconnected". So I mention the words "drop" and "alive" to make it more relatable to lifetime.
Revert #85176 addition of `clone_from` for `ManuallyDrop`
Forwarding `clone_from` to the inner value changes the observable behavior, as previously the inner value would *not* be dropped by the default implementation.
Frankly, this is a super-niche case, so #85176 is welcome to argue the behavior should be otherwise! But if we overrride it, IMO documenting the behavior would be good.
Example: https://play.rust-lang.org/?version=nightly&mode=debug&edition=2018&gist=c5d0856686fa850c1d7ee16891014efb
Implement nonzero arithmetics for NonZero types.
Hello'all, this is my first PR to this repo.
Non-zero natural numbers are stable by addition/multiplication/exponentiation, so it makes sense to make this arithmetic possible with `NonZeroU*`.
The major pitfall is that overflowing underlying `u*` types possibly lead to underlying `0` values, which break the major invariant of `NonZeroU*`. To accommodate it, only `checked_` and `saturating_` operations are implemented.
Other variants allowing wrapped results like `wrapping_` or `overflowing_` are ruled out *de facto*.
`impl Add<u*> for NonZeroU* { .. }` was considered, as it panics on overflow which enforces the invariant, but it does not so in release mode. I considered forcing `NonZeroU*::add` to panic in release mode by deferring the check to `u*::checked_add`, but this is less explicit for the user than directly using `NonZeroU*::checked_add`.
Following `@Lokathor's` advice on zulip, I have dropped the idea.
`@poliorcetics` on Discord also suggested implementing `_sub` operations, but I'd postpone this to another PR if there is a need for it. My opinion is that it could be useful in some cases, but that it makes less sense because non-null natural numbers are not stable by subtraction even in theory, while the overflowing problem is just about technical implementation.
One thing I don't like is that the type of the `other` arg differs in every implementation: `_add` methods accept any raw positive integer, `_mul` methods only accept non-zero values otherwise the invariant is also broken, and `_pow` only seems to accept `u32` for a reason I ignore but that seems consistent throughout `std`. Maybe there is a better way to harmonize this?
This is it, Iope I haven't forgotten anything and I'll be happy to read your feedback.
Original senders that are still hanging around could cause
Receiver::recv to not block since this is a potential footgun
for beginners, clarify more on this in the docs for readers to
be aware about it.
Fix minor tidbits in sender recv doc
Co-authored-by: Dylan DPC <dylan.dpc@gmail.com>
Add example for unbounded receive loops in doc
Show the drop(tx) pattern, based on tokio docs
https://tokio-rs.github.io/tokio/doc/tokio/sync/index.html
Fix example code for drop sender recv
Fix wording in sender docs
Co-authored-by: Josh Triplett <josh@joshtriplett.org>
std: Stabilize wasm simd intrinsics
This commit performs two changes to stabilize Rust support for
WebAssembly simd intrinsics:
* The stdarch submodule is updated to pull in rust-lang/stdarch#1179.
* The `wasm_target_feature` feature gate requirement for the `simd128`
feature has been removed, stabilizing the name `simd128`.
This should conclude the FCP started on #74372 and...
Closes#74372
This commit performs two changes to stabilize Rust support for
WebAssembly simd intrinsics:
* The stdarch submodule is updated to pull in rust-lang/stdarch#1179.
* The `wasm_target_feature` feature gate requirement for the `simd128`
feature has been removed, stabilizing the name `simd128`.
This should conclude the FCP started on #74372 and...
Closes#74372
to_digit simplification (less jumps)
I just realised we might be able to make use of the fact that changing case in ascii is easy to help simplify to_digit some more.
It looks a bit cleaner and it looks like it's less jumps and there's less instructions in the generated assembly:
https://godbolt.org/z/84Erh5dhz
The benchmarks don't really tell me much. Maybe a slight improvement on the var radix.
Before:
```
test char::methods::bench_to_digit_radix_10 ... bench: 53,819 ns/iter (+/- 8,314)
test char::methods::bench_to_digit_radix_16 ... bench: 57,265 ns/iter (+/- 10,730)
test char::methods::bench_to_digit_radix_2 ... bench: 55,077 ns/iter (+/- 5,431)
test char::methods::bench_to_digit_radix_36 ... bench: 56,549 ns/iter (+/- 3,248)
test char::methods::bench_to_digit_radix_var ... bench: 43,848 ns/iter (+/- 3,189)
test char::methods::bench_to_digit_radix_10 ... bench: 51,707 ns/iter (+/- 10,946)
test char::methods::bench_to_digit_radix_16 ... bench: 52,835 ns/iter (+/- 2,689)
test char::methods::bench_to_digit_radix_2 ... bench: 51,012 ns/iter (+/- 2,746)
test char::methods::bench_to_digit_radix_36 ... bench: 53,210 ns/iter (+/- 8,645)
test char::methods::bench_to_digit_radix_var ... bench: 40,386 ns/iter (+/- 4,711)
test char::methods::bench_to_digit_radix_10 ... bench: 54,088 ns/iter (+/- 5,677)
test char::methods::bench_to_digit_radix_16 ... bench: 55,972 ns/iter (+/- 17,229)
test char::methods::bench_to_digit_radix_2 ... bench: 52,083 ns/iter (+/- 2,425)
test char::methods::bench_to_digit_radix_36 ... bench: 54,132 ns/iter (+/- 1,548)
test char::methods::bench_to_digit_radix_var ... bench: 41,250 ns/iter (+/- 5,299)
```
After:
```
test char::methods::bench_to_digit_radix_10 ... bench: 48,907 ns/iter (+/- 19,449)
test char::methods::bench_to_digit_radix_16 ... bench: 52,673 ns/iter (+/- 8,122)
test char::methods::bench_to_digit_radix_2 ... bench: 48,509 ns/iter (+/- 2,885)
test char::methods::bench_to_digit_radix_36 ... bench: 50,526 ns/iter (+/- 4,610)
test char::methods::bench_to_digit_radix_var ... bench: 38,618 ns/iter (+/- 3,180)
test char::methods::bench_to_digit_radix_10 ... bench: 54,202 ns/iter (+/- 6,994)
test char::methods::bench_to_digit_radix_16 ... bench: 56,585 ns/iter (+/- 8,448)
test char::methods::bench_to_digit_radix_2 ... bench: 50,548 ns/iter (+/- 1,674)
test char::methods::bench_to_digit_radix_36 ... bench: 52,749 ns/iter (+/- 2,576)
test char::methods::bench_to_digit_radix_var ... bench: 40,215 ns/iter (+/- 3,327)
test char::methods::bench_to_digit_radix_10 ... bench: 50,233 ns/iter (+/- 22,272)
test char::methods::bench_to_digit_radix_16 ... bench: 50,841 ns/iter (+/- 19,981)
test char::methods::bench_to_digit_radix_2 ... bench: 50,386 ns/iter (+/- 4,555)
test char::methods::bench_to_digit_radix_36 ... bench: 52,369 ns/iter (+/- 2,737)
test char::methods::bench_to_digit_radix_var ... bench: 40,417 ns/iter (+/- 2,766)
```
I removed the likely as it resulted in a few less instructions. (It's not been in there long - I added it in the last to_digit iteration).
fix off by one in `std::iter::Iterator` documentation
the range `(0..10)` is documented as "The even numbers from zero to ten." - should be ".. to nine".
Updated code examples and wording in move keyword documentation
Had a conversation with someone on the Rust Discord who was confused by the move keyword documentation. Some of the wording is odd sounding ("owned by value" - what else can something be owned by?). Also, some of the examples used Copy types when demonstrating move, leading to variables still being accessible in the outer scope after the move, contradicting the examples' comments.
I changed the move keyword documentation a bit, removing that odd wording and changing all the examples to use non-Copy types
Multiple improvements to RwLocks
This PR replicates #77147, #77380 and #84650 on RWLocks :
- Split `sys_common::RWLock` in `StaticRWLock` and `MovableRWLock`
- Unbox rwlocks on some platforms (Windows, Wasm and unsupported)
- Simplify `RwLock::into_inner`
Notes to reviewers :
- For each target, I copied `MovableMutex` to guess if `MovableRWLock` should be boxed.
- ~A comment says that `StaticMutex` is not re-entrant, I don't understand why and I don't know whether it applies to `StaticRWLock`.~
r? `@m-ou-se`
Filesystems generally have a tree-ish structure which means
paths are more likely to share a prefix than a suffix. Absolute paths
are especially prone to share long prefixes.
Make copy/copy_nonoverlapping fn's again
Make copy/copy_nonoverlapping fn's again, rather than intrinsics.
This a short-term change to address issue #84297.
It effectively reverts PRs #81167#81238 (and part of #82967), #83091, and parts of #79684.
Revert "implement TrustedRandomAccess for Take iterator adapter"
This reverts commit 37a5b515e9 (#83990).
The original change unintentionally caused side-effects from certain iterator chains combining `take`, `zip` and `next_back()` to be omitted which is observable by user code and thus likely a breaking change
Technically one could declare it not a breaking change since `Zip`'s API contract is silent about about its backwards iteration behavior but on the other hand there is nothing in the stable Iterator API that could justify the currently observable behavior. And either way, this impact wasn't noticed or discussed in the original PR.
Fixes#85969
Forwarding implementation for Seek trait's stream_position method
Forwarding implementations for `Seek` trait's `stream_position` were missed when it was stabilized in `1.51.0`
Add `Ipv6Addr::is_unicast`
Adds an unstable utility method `Ipv6Addr::is_unicast` under the feature flag `ip` (tracking issue: #27709).
Added for completeness with the other unicast methods (see also https://github.com/rust-lang/rust/issues/85604#issuecomment-848220455) and opposite of `is_multicast`.
