errors: only eagerly translate subdiagnostics
Subdiagnostics don't need to be lazily translated, they can always be eagerly translated. Eager translation is slightly more complex as we need to have a `DiagCtxt` available to perform the translation, which involves slightly more threading of that context.
This slight increase in complexity should enable later simplifications - like passing `DiagCtxt` into `AddToDiagnostic` and moving Fluent messages into the diagnostic structs rather than having them in separate files (working on that was what led to this change).
r? ```@nnethercote```
Subdiagnostics don't need to be lazily translated, they can always be
eagerly translated. Eager translation is slightly more complex as we need
to have a `DiagCtxt` available to perform the translation, which involves
slightly more threading of that context.
This slight increase in complexity should enable later simplifications -
like passing `DiagCtxt` into `AddToDiagnostic` and moving Fluent messages
into the diagnostic structs rather than having them in separate files
(working on that was what led to this change).
Signed-off-by: David Wood <david@davidtw.co>
Invert diagnostic lints.
That is, change `diagnostic_outside_of_impl` and `untranslatable_diagnostic` from `allow` to `deny`, because more than half of the compiler has been converted to use translated diagnostics.
This commit removes more `deny` attributes than it adds `allow` attributes, which proves that this change is warranted.
r? ````@davidtwco````
That is, change `diagnostic_outside_of_impl` and
`untranslatable_diagnostic` from `allow` to `deny`, because more than
half of the compiler has be converted to use translated diagnostics.
This commit removes more `deny` attributes than it adds `allow`
attributes, which proves that this change is warranted.
Improve error message when `cargo build` is used to build the compiler
Inspired by #76446.
Doing it for `core` is probably higher value but also way harder because tools like cargo or rustc-build-sysroot would need to be fixed first, which I don't feel like doing.
Error codes are integers, but `String` is used everywhere to represent
them. Gross!
This commit introduces `ErrCode`, an integral newtype for error codes,
replacing `String`. It also introduces a constant for every error code,
e.g. `E0123`, and removes the `error_code!` macro. The constants are
imported wherever used with `use rustc_errors::codes::*`.
With the old code, we have three different ways to specify an error code
at a use point:
```
error_code!(E0123) // macro call
struct_span_code_err!(dcx, span, E0123, "msg"); // bare ident arg to macro call
\#[diag(name, code = "E0123")] // string
struct Diag;
```
With the new code, they all use the `E0123` constant.
```
E0123 // constant
struct_span_code_err!(dcx, span, E0123, "msg"); // constant
\#[diag(name, code = E0123)] // constant
struct Diag;
```
The commit also changes the structure of the error code definitions:
- `rustc_error_codes` now just defines a higher-order macro listing the
used error codes and nothing else.
- Because that's now the only thing in the `rustc_error_codes` crate, I
moved it into the `lib.rs` file and removed the `error_codes.rs` file.
- `rustc_errors` uses that macro to define everything, e.g. the error
code constants and the `DIAGNOSTIC_TABLES`. This is in its new
`codes.rs` file.
`Diagnostic::code` has the type `DiagnosticId`, which has `Error` and
`Lint` variants. Plus `Diagnostic::is_lint` is a bool, which should be
redundant w.r.t. `Diagnostic::code`.
Seems simple. Except it's possible for a lint to have an error code, in
which case its `code` field is recorded as `Error`, and `is_lint` is
required to indicate that it's a lint. This is what happens with
`derive(LintDiagnostic)` lints. Which means those lints don't have a
lint name or a `has_future_breakage` field because those are stored in
the `DiagnosticId::Lint`.
It's all a bit messy and confused and seems unintentional.
This commit:
- removes `DiagnosticId`;
- changes `Diagnostic::code` to `Option<String>`, which means both
errors and lints can straightforwardly have an error code;
- changes `Diagnostic::is_lint` to `Option<IsLint>`, where `IsLint` is a
new type containing a lint name and a `has_future_breakage` bool, so
all lints can have those, error code or not.
100% of the serialized enums during libcore compilation fit into the
smaller tag, and this eliminates hitting the leb128 code for
coding/decoding when we can statically guarantee that's not required.
30% of all leb128 integers serialized in libcore (12981183 total) come
from the usize's removed here.
Avoid specialization in the metadata serialization code
With the exception of a perf-only specialization for byte slices and byte vectors.
This uses the same trick of introducing a new trait and having the Encodable and Decodable derives add a bound to it as used for TyEncoder/TyDecoder. The new code is clearer about which encoder/decoder uses which impl and it reduces the dependency of rustc on specialization, making it easier to remove support for specialization entirely or turn it into a construct that is only allowed for perf optimizations if we decide to do this.
`Diagnostic` has 40 methods that return `&mut Self` and could be
considered setters. Four of them have a `set_` prefix. This doesn't seem
necessary for a type that implements the builder pattern. This commit
removes the `set_` prefixes on those four methods.
And make all hand-written `IntoDiagnostic` impls generic, by using
`DiagnosticBuilder::new(dcx, level, ...)` instead of e.g.
`dcx.struct_err(...)`.
This means the `create_*` functions are the source of the error level.
This change will let us remove `struct_diagnostic`.
Note: `#[rustc_lint_diagnostics]` is added to `DiagnosticBuilder::new`,
it's necessary to pass diagnostics tests now that it's used in
`into_diagnostic` functions.
First, it is parameterized by the name of the diagnostic and the
DiagCtxt. These are given to `session_diagnostic_derive` and
`lint_diagnostic_derive`. But the names are hard-wired as "diag" and
"handler" (should be "dcx"), and there's no clear reason for the
parameterization. So this commit removes the parameterization and
hard-wires the names internally.
Once that is done `DiagnosticDeriveBuilder` is reduced to a trivial
wrapper around `DiagnosticDeriveKind`, and can be removed.
Also, `DiagnosticDerive` and `LintDiagnosticDerive` don't need the
`builder` field, because it has been reduced to a kind, and they know
their own kind. This avoids the need for some
`let`/`else`/`unreachable!` kind checks
And `DiagnosticDeriveVariantBuilder` no longer needs a lifetime, because
the `parent` field is changed to `kind`, which is now a trivial copy
type.
detects redundant imports that can be eliminated.
for #117772 :
In order to facilitate review and modification, split the checking code and
removing redundant imports code into two PR.
It currently has the syntax
`current_rustc_version!(env!("CFG_RELEASE"))` where the
`env!("CFG_RELEASE")` part looks like a normal expression but it is
actually parsed and processed by the `current_rustc_version` macro.
The documented rationale for this is that you'll find it if you grep for
`env!("CFG_RELEASE")`. But I think that's of very little use -- I would
personally grep for just "CFG_RELEASE" -- and it complicates the macro,
requiring the use of `syn`.
This commit simplifies the macro.
- Sort dependencies and features sections.
- Add `tidy` markers to the sorted sections so they stay sorted.
- Remove empty `[lib`] sections.
- Remove "See more keys..." comments.
Excluded files:
- rustc_codegen_{cranelift,gcc}, because they're external.
- rustc_lexer, because it has external use.
- stable_mir, because it has external use.
Stash and cancel cycle errors for auto trait leakage in opaques
We don't need to emit a traditional cycle error when we have a selection error that explains what's going on but in more detail.
We may want to augment this error to actually point out the cycle, now that the cycle error is not being emitted. We could do that by storing the set of opaques that was in the `CyclePlaceholder` that gets returned from `type_of_opaque`.
r? `@oli-obk` cc `@estebank` #117235
---- symbols::tests::test_symbols stdout ----
thread 'symbols::tests::test_symbols' panicked at library/proc_macro/src/bridge/client.rs:311:17:
procedural macro API is used outside of a procedural macro
