On the following example, point at `String` instead of the whole type:
```
error[E0277]: the trait bound `String: Copy` is not satisfied
--> $DIR/own-bound-span.rs:14:24
|
LL | let _: <S as D>::P<String>;
| ^^^^^^ the trait `Copy` is not implemented for `String`
|
note: required by a bound in `D::P`
--> $DIR/own-bound-span.rs:4:15
|
LL | type P<T: Copy>;
| ^^^^ required by this bound in `D::P`
```
Allow explicit `#[repr(Rust)]`
This is identical to no `repr()` at all. For `Rust, packed` and `Rust, align(x)`, it should be the same as no `Rust` at all (as, afaik, `#[repr(align(16))]` uses the Rust ABI.)
The main use case for this is being able to explicitly say "I want to use the Rust ABI" in very very rare circumstances where the first obvious choice would be the C ABI yet is undesirable, which is already possible with functions as `extern "Rust"`. This would be useful for silencing https://github.com/rust-lang/rust-clippy/pull/11253. It's also more consistent with `extern`.
The lack of this also tripped me up a bit when I was new to Rust, as I expected this to be possible.
Fix argument removal suggestion around macros
Fixes#112437.
Fixes#113866.
Helps with #114255.
The issue was that `span.find_ancestor_inside(outer)` could previously return a span with a different expansion context from `outer`.
This happens for example for the built-in macro `panic!`, which expands to another macro call of `panic_2021!` or `panic_2015!`. Because the call site of `panic_20xx!` has not associated source code, its span currently points to the call site of `panic!` instead.
Something similar also happens items that get desugared in AST->HIR lowering. For example, `for` loops get two spans: One "inner" span that has the `.desugaring_kind()` kind set to `DesugaringKind::ForLoop` and one "outer" span that does not. Similar to the macro situation, both of these spans point to the same source code, but have different expansion contexts.
This causes problems, because joining two spans with different expansion contexts will usually[^1] not actually join them together to avoid creating "spaghetti" spans that go from the macro definition to the macro call. For example, in the following snippet `full_span` might not actually contain the `adjusted_start` and `adjusted_end`. This caused the broken suggestion / debug ICE in the linked issues.
```rust
let adjusted_start = start.find_ancestor_inside(shared_ancestor);
let adjusted_end = end.find_ancestor_inside(shared_ancestor);
let full_span = adjusted_start.to(adjusted_end)
```
To fix the issue, this PR introduces a new method, `find_ancestor_inside_same_ctxt`, which combines the functionality of `find_ancestor_inside` and `find_ancestor_in_same_ctxt`: It finds an ancestor span that is contained within the parent *and* has the same syntax context, and is therefore safe to extend. This new method should probably be used everywhere, where the returned span is extended, but for now it is just used for the argument removal suggestion.
Additionally, this PR fixes a second issue where the function call itself is inside a macro but the arguments come from outside the macro. The test is added in the first commit to include stderr diff, so this is best reviewed commit by commit.
[^1]: If one expansion context is the root context and the other is not.
When encountering code like
```rust
fn foo() -> i32 {
match 0 {
1 => return 0,
2 => "",
_ => 1,
}
}
```
Point at the return type and not at the prior arm, as that arm has type
`!` which isn't influencing the arm corresponding to arm `2`.
Fix#78124.
Indexing is similar to method calls in having an arbitrary
left-hand-side and then something on the right, which is the main part
of the expression. Method calls already have a span for that right part,
but indexing does not. This means that long method chains that use
indexing have really bad spans, especially when the indexing panics and
that span in coverted into a panic location.
This does the same thing as method calls for the AST and HIR, storing an
extra span which is then put into the `fn_span` field in THIR.
new unstable option: -Zwrite-long-types-to-disk
This option guards the logic of writing long type names in files and instead using short forms in error messages in rustc_middle/ty/error behind a flag. The main motivation for this change is to disable this behaviour when running ui tests.
This logic can be triggered by running tests in a directory that has a long enough path, e.g. /my/very-long-path/where/rust-codebase/exists/
This means ui tests can fail depending on how long the path to their file is.
Some ui tests actually rely on this behaviour for their assertions, so for those we enable the flag manually.
This option guards the logic of writing long type names in files and
instead using short forms in error messages in rustc_middle/ty/error
behind a flag. The main motivation for this change is to disable this
behaviour when running ui tests.
This logic can be triggered by running tests in a directory that has a
long enough path, e.g. /my/very-long-path/where/rust-codebase/exists/
This means ui tests can fail depending on how long the path to their
file is.
Some ui tests actually rely on this behaviour for their assertions,
so for those we enable the flag manually.
Implement selection for `Unsize` for better coercion behavior
In order for much of coercion to succeed, we need to be able to deal with partial ambiguity of `Unsize` traits during selection. However, I pessimistically implemented selection in the new trait solver to just bail out with ambiguity if it was a built-in impl:
9227ff28af/compiler/rustc_trait_selection/src/solve/eval_ctxt/select.rs (L126)
This implements a proper "rematch" procedure for dealing with built-in `Unsize` goals, so that even if the goal is ambiguous, we are able to get nested obligations which are used in the coercion selection-like loop:
9227ff28af/compiler/rustc_hir_typeck/src/coercion.rs (L702)
Second commit just moves a `resolve_vars_if_possible` call to fix a bug where we weren't detecting a trait upcasting to occur.
r? ``@lcnr``
Don't call `query_normalize` when reporting similar impls
Firstly, It's sketchy to be using `query_normalize` at all during HIR typeck -- it's asking for an ICE 😅. Secondly, we're normalizing an impl trait ref that potentially has parameter types in `ty::ParamEnv::empty()`, which is kinda sketchy as well.
The only UI test change from removing this normalization is that we don't evaluate anonymous constants in impls, which end up giving us really ugly suggestions:
```
error[E0277]: the trait bound `[X; 35]: Default` is not satisfied
--> /home/gh-compiler-errors/test.rs:4:5
|
4 | <[X; 35] as Default>::default();
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ the trait `Default` is not implemented for `[X; 35]`
|
= help: the following other types implement trait `Default`:
&[T]
&mut [T]
[T; 32]
[T; core::::array::{impl#30}::{constant#0}]
[T; core::::array::{impl#31}::{constant#0}]
[T; core::::array::{impl#32}::{constant#0}]
[T; core::::array::{impl#33}::{constant#0}]
[T; core::::array::{impl#34}::{constant#0}]
and 27 others
```
So just fold the impls with a `BottomUpFolder` that calls `ty::Const::eval`. This doesn't work totally correctly with generic-const-exprs, but it's fine for stable code, and this is error reporting after all.
Make compiletest aware of targets without dynamic linking
Some parts of the compiletest internals and some tests require dynamic linking to work, which is not supported by all targets. Before this PR, this was handled by if branches matching on the target name.
This PR loads whether a target supports dynamic linking or not from the target spec, and adds a `// needs-dynamic-linking` attribute for tests that require it. Note that I was not able to replace all the old conditions based on the target name, as some targets have `dynamic_linking: true` in their spec but pretend they don't have it in compiletest.
Also, to get this to work I had to *partially* revert #111472 (cc `@djkoloski` `@tmandry` `@bjorn3).` On one hand, only the target spec contains whether a target supports dynamic linking, but on the other hand a subset of the fields can be overridden through `-C` flags (as far as I'm aware only `-C panic=$strategy`). The solution I came up with is to take the target spec as the base, and then override the panic strategy based on `--print=cfg`. Hopefully that should not break y'all again.
`hir`: Add `Become` expression kind (explicit tail calls experiment)
This adds `hir::ExprKind::Become` alongside ast lowering. During hir-thir lowering we currently lower `become` as `return`, so that we can partially test `become` without ICEing.
cc `@scottmcm`
r? `@Nilstrieb`
Always register sized obligation for argument
Removes a "hack" that skips registering sized obligations for parameters that are simple identifiers. This doesn't seem to affect diagnostics because we're probably already being smart enough about deduplicating identical error messages anyways.
Fixes#112608
Suggest publicly accessible paths for items in private mod:
When encountering a path in non-import situations that are not reachable
due to privacy constraints, search for any public re-exports that the
user could use instead.
Track whether an import suggestion is offering a re-export.
When encountering a path with private segments, mention if the item at
the final path segment is not publicly accessible at all.
Add item visibility metadata to privacy errors from imports:
On unreachable imports, record the item that was being imported in order
to suggest publicly available re-exports or to be explicit that the item
is not available publicly from any path.
In order to allow this, we add a mode to `resolve_path` that will not
add new privacy errors, nor return early if it encounters one. This way
we can get the `Res` corresponding to the final item in the import,
which is used in the privacy error machinery.
Adjust UI tests for `unit_bindings` lint
- Explicitly annotate `let x: () = expr;` where `x` has unit type, or remove the unit binding to leave only `expr;` instead.
- Use `let () = init;` or `let pat = ();` where appropriate.
- Fix disjoint-capture-in-same-closure test which wasn't actually testing a closure: `tests/ui/closures/2229_closure_analysis/run_pass/disjoint-capture-in-same-closure.rs`.
Note that unfortunately there's *a lot* of UI tests, there are a couple of places where I may have left something like `let (): ()` (this is not needed but is left over from an ealier version of the lint) which is bad style.
This PR is to help with the `unit_bindings` lint at #112380.
- Either explicitly annotate `let x: () = expr;` where `x` has unit
type, or remove the unit binding to leave only `expr;` instead.
- Fix disjoint-capture-in-same-closure test
Uplift `clippy::cmp_nan` lint
This PR aims at uplifting the `clippy::cmp_nan` lint into rustc.
## `invalid_nan_comparisons`
~~(deny-by-default)~~ (warn-by-default)
The `invalid_nan_comparisons` lint checks comparison with `f32::NAN` or `f64::NAN` as one of the operand.
### Example
```rust,compile_fail
let a = 2.3f32;
if a == f32::NAN {}
```
### Explanation
NaN does not compare meaningfully to anything – not even itself – so those comparisons are always false.
-----
Mostly followed the instructions for uplifting a clippy lint described here: https://github.com/rust-lang/rust/pull/99696#pullrequestreview-1134072751
`@rustbot` label: +I-lang-nominated
r? compiler
Don't use `can_eq` in `derive(..)` suggestion for missing method
Unsatisfied predicates returned from method probe may reference inference vars from that probe, so drop this extra check I added in #110877 for more accurate derive suggestions...
Fixes#111500
MIR: opt-in normalization of `BasicBlock` and `Local` numbering
This doesn't matter at all for actual codegen, but after spending some time reading pre-codegen MIR, I was wishing I didn't have to jump around so much in reading post-inlining code.
So this add two passes that are off by default for every mir level, but can be enabled (`-Zmir-enable-passes=+ReorderBasicBlocks,+ReorderLocals`) for humans.
Add a tidy check to find unexpected files in UI tests, and clean up the results
While looking at UI tests, I noticed several weird files that were not being tested, some from even pre-1.0. I added a tidy check that fails if any files not known to compiletest or not used in tests (via manual list) are present in the ui tests.
Unfortunately the root entry limit had to be raised by 1 to accommodate the stderr file for one of the tests.
r? `@fee1-dead`
tweak "make mut" spans when assigning to locals
Work towards fixing #106857
This PR just cleans up a lot of spans which is helpful before properly fixing the issues. Best reviewed commit-by-commit.
r? `@estebank`
Tweak borrow suggestion span
Avoids a `span_to_snippet` call when we don't need to surround the expression in parentheses. The fact that the suggestion was using the whole span of the expression rather than just appending a `&` was prevented me from using `// run-rustfix` in another PR (https://github.com/rust-lang/rust/pull/110432#discussion_r1170500484).
Also some drive-by renames of functions that have been annoying me for a bit.
Fix some suggestions where a `Box<T>` is expected.
This fixes#111011, and also adds a suggestion for boxing a unit type when a `Box<T>` was expected and an empty block was found.
Implement tuple<->array convertions via `From`
This PR adds the following impls that convert between homogeneous tuples and arrays of the corresponding lengths:
```rust
impl<T> From<[T; 1]> for (T,) { ... }
impl<T> From<[T; 2]> for (T, T) { ... }
/* ... */
impl<T> From<[T; 12]> for (T, T, T, T, T, T, T, T, T, T, T, T) { ... }
impl<T> From<(T,)> for [T; 1] { ... }
impl<T> From<(T, T)> for [T; 2] { ... }
/* ... */
impl<T> From<(T, T, T, T, T, T, T, T, T, T, T, T)> for [T; 12] { ... }
```
IMO these are quite uncontroversial but note that they are, just like any other trait impls, insta-stable.
My type ascription
Oh rip it out
Ah
If you think we live too much then
You can sacrifice diagnostics
Don't mix your garbage
Into my syntax
So many weird hacks keep diagnostics alive
Yet I don't even step outside
So many bad diagnostics keep tyasc alive
Yet tyasc doesn't even bother to survive!
Substitute missing trait items suggestion correctly
Properly substitute missing item suggestions, so that when they reference generics from their parent trait they actually have the right time for the impl.
Also, some other minor tweaks like using `/* Type */` to signify a GAT's type is actually missing, and fixing generic arg suggestions for GATs in general.
Migrate most of `rustc_builtin_macros` to diagnostic impls
cc #100717
This is a couple of days work, but I decided to stop for now before the PR becomes too big. There's around 50 unresolved failures when `rustc::untranslatable_diagnostic` is denied, which I'll finish addressing once this PR goes thtough
A couple of outputs have changed, but in all instances I think the changes are an improvement/are more consistent with other diagnostics (although I'm happy to revert any which seem worse)
Update `error [E0449]: unnecessary visibility qualifier` to be more clear
This updates the error message `error[E0449]: unnecessary visibility qualifier` by clearly indicating that visibility qualifiers already inherit their visibility from a parent item. The error message previously implied that the qualifiers were permitted, which is not the case anymore.
Resolves#109822.
Make `unused_allocation` lint against `Box::new` too
Previously it only linted against `box` syntax, which likely won't ever be stabilized, which is pretty useless. Even now I'm not sure if it's a meaningful lint, but it's at least something 🤷
This means that code like the following will be linted against:
```rust
Box::new([1, 2, 3]).len();
f(&Box::new(1)); // where f : &i32 -> ()
```
The lint works by checking if a `Box::new` (or `box`) expression has an a borrow adjustment, meaning that the code that first stores the box in a variable won't be linted against:
```rust
let boxed = Box::new([1, 2, 3]); // no lint
boxed.len();
```
Implement -Zlink-directives=yes/no
`-Zlink-directives=no` will ignored `#[link]` directives while compiling a crate, so nothing is emitted into the crate's metadata. The assumption is that the build system already knows about the crate's native dependencies and can provide them at link time without these directives.
This is another way to address issue # #70093, which is currently addressed by `-Zlink-native-libraries` (implemented in #70095). The latter is implemented at link time, which has the effect of ignoring `#[link]` in *every* crate. This makes it a very large hammer as it requires all native dependencies to be known to the build system to be at all usable, including those in sysroot libraries. I think this means its effectively unused, and definitely under-used.
Being able to control this on a crate-by-crate basis should make it much easier to apply when needed.
I'm not sure if we need both mechanisms, but we can decide that later.
cc `@pcwalton` `@cramertj`
diagnostics: remove inconsistent English article "this" from E0107
Consider [`tests/ui/const-generics/generic_const_exprs/issue-102768.stderr`][issue-102768.stderr], the error message where it gives additional notes about where the associated type is defined, and how the dead code lint doesn't have an article, like in [`tests/ui/lint/dead-code/issue-85255.stderr`][issue-85255.stderr]. They don't have articles, so it seems unnecessary to have one here.
[issue-102768.stderr]: 07c993eba8/tests/ui/const-generics/generic_const_exprs/issue-102768.stderr
[issue-85255.stderr]: 07c993eba8/tests/ui/lint/dead-code/issue-85255.stderr
Consider `tests/ui/const-generics/generic_const_exprs/issue-102768.stderr`,
the error message where it gives additional notes about where the associated
type is defined, and how the dead code lint doesn't have an article,
like in `tests/ui/lint/dead-code/issue-85255.stderr`. They don't have
articles, so it seems unnecessary to have one here.
Ban associated type bounds in bad positions
We should not try to lower associated type bounds into TAITs in positions where `impl Trait` is not allowed (except for in `where` clauses, like `where T: Trait<Assoc: Bound>`).
This is achieved by using the same `rustc_ast_lowering` machinery as impl-trait does to characterize positions as universal/existential/disallowed.
Fixes#106077
Split out the first commit into #108066, since it's not really related.
`-Zlink-directives=no` will ignored `#[link]` directives while compiling a
crate, so nothing is emitted into the crate's metadata. The assumption is
that the build system already knows about the crate's native dependencies
and can provide them at link time without these directives.
This is another way to address issue # #70093, which is currently addressed
by `-Zlink-native-libraries` (implemented in #70095). The latter is
implemented at link time, which has the effect of ignoring `#[link]`
in *every* crate. This makes it a very large hammer as it requires all
native dependencies to be known to the build system to be at all usable,
including those in sysroot libraries. I think this means its effectively
unused, and definitely under-used.
Being able to control this on a crate-by-crate basis should make it much
easier to apply when needed.
I'm not sure if we need both mechanisms, but we can decide that later.
Fix overlapping spans in removing extra arguments
Fixes#108225
Each span is already extended to include the previous comma, so extending to the *next* comma is unecessary and causes an ICE with assertions on.
``@rustbot`` label +A-diagnostics
Convert a hard-warning about named static lifetimes into lint "unused_lifetimes"
Fixes https://github.com/rust-lang/rust/issues/96956.
Some changes are ported from https://github.com/rust-lang/rust/pull/98079, thanks to jeremydavis519.
r? `@estebank` `@petrochenkov`
Any feedback is appreciated!
## Actions
- [x] resolve conflicts
- [x] fix build
- [x] address review comments in last pr
- [x] update tests
Define the `named_static_lifetimes` lint
This lint will replace the existing hard-warning.
Replace the named static lifetime hard-warning with the new lint
Update the UI tests for the `named_static_lifetimes` lint
Remove the direct dependency on `rustc_lint_defs`
fix build
Signed-off-by: Zhi Qi <qizhi@pingcap.com>
use "UNUSED_LIFETIMES" instead
Signed-off-by: Zhi Qi <qizhi@pingcap.com>
update 1 test and fix typo
Signed-off-by: Zhi Qi <qizhi@pingcap.com>
update tests
Signed-off-by: Zhi Qi <qizhi@pingcap.com>
fix tests: add extra blank line
Signed-off-by: Zhi Qi <qizhi@pingcap.com>
Most tests involving save-analysis were removed, but I kept a few where
the `-Zsave-analysis` was an add-on to the main thing being tested,
rather than the main thing being tested.
For `x.py install`, the `rust-analysis` target has been removed.
For `x.py dist`, the `rust-analysis` target has been kept in a
degenerate form: it just produces a single file `reduced.json`
indicating that save-analysis has been removed. This is necessary for
rustup to keep working.
Closes#43606.
Avoid exposing type parameters and implementation details sourced from macro expansions
Fixes#107745.
~~I would like to **request some guidance** for this issue, because I don't think this is a good fix (a band-aid at best).~~
### The Problem
The code
```rust
fn main() {
println!("{:?}", []);
}
```
gets desugared into (`rustc +nightly --edition=2018 issue-107745.rs -Z unpretty=hir`):
```rust
#[prelude_import]
use std::prelude::rust_2018::*;
#[macro_use]
extern crate std;
fn main() {
{
::std::io::_print(<#[lang = "format_arguments"]>::new_v1(&["",
"\n"], &[<#[lang = "format_argument"]>::new_debug(&[])]));
};
}
```
so the diagnostics code tries to be as specific and helpful as possible, and I think it finds that `[]` needs a type parameter and so does `new_debug`. But since `[]` doesn't have an origin for the type parameter definition, it points to `new_debug` instead and leaks the internal implementation detail since all `[]` has is an type inference variable.
### ~~The Bad Fix~~
~~This PR currently tries to fix the problem by bypassing the generated function `<#[lang = "format_argument"]>::new_debug` to avoid its generic parameter (I think it is auto-generated from the argument `[_; 0]`?) from getting collected as an `InsertableGenericArg`. This is problematic because it also prevents the help from getting displayed.~~
~~I think this fix is not ideal and hard-codes the format generated code pattern, but I can't think of a better fix. I have tried asking on Zulip but no responses there yet.~~
Fix suggestions rendering when the diff span is multiline
Fixes#92741
cc `@estebank`
I think, I finally fixed. I still want to go back and try to clean up the code a bit. I'm open to suggestions.
Some examples of the new suggestions:
```
help: consider removing the borrow
|
2 - &
|
```
```
help: consider removing the borrow
|
2 - &
3 - mut
|
```
```
help: consider removing the borrow
|
2 - &
3 - mut if true { true } else { false }
2 + if true { true } else { false }
|
```
Should we add a test to ensure this behavior doesn't disappear in the future?
Suggest using a lock for `*Cell: Sync` bounds
I mostly did this for `OnceCell<T>` at first because users will be confused to see that the `OnceCell<T>` in `std` isn't `Sync` but then extended it to `Cell<T>` and `RefCell<T>` as well.
Change `bindings_with_variant_name` to deny-by-default
Changed the `bindings_with_variant_name` lint to deny-by-default and fixed up the affected tests.
Addresses #103442.
Migrate mir_build diagnostics 2 of 3
The first three commits are fairly boring, however I've made some changes to the output of the match checking diagnostics.
