Skip single use lifetime lint for generated opaque types
Fix: #77175
The opaque type generated by the desugaring process of an async function uses the lifetimes defined by the originating function. The DefId for the lifetimes in the opaque type are different from the ones in the originating async function - as they should be, as far as I understand, and could therefore be considered a single use lifetimes, this causes the single_use_lifetimes lint to fail compilation if explicitly denied. This fix skips the lint for lifetimes used only once in generated opaque types for an async function that are declared in the parent async function definition.
More info in the comments on the original issue: 1 and 2
Use smaller spans for some structured suggestions
Use more accurate suggestion spans for
* argument parse error
* fully qualified path
* missing code block type
* numeric casts
As reported in issue #77175, the opaque type generated by the desugaring process of an async function uses the lifetimes defined by the originating function. The definition ID for the lifetimes in the opaque method is different from the one in the originating async function and it could therefore be considered a single use of the lifetimne, this causes the single_use_lifetimes lint to fail compilation if explicitly denied. This fix skips the lint for lifetimes used only once in generated opaque types for an async function that are declared in the parent async function definition.
Remove `Session.if_let_suggestions`
We can instead if either the LHS or RHS types contain
`TyKind::Error`. In addition to covering the case where
we would have previously updated `if_let_suggestions`, this might
also prevent redundant errors in other cases as well.
We can instead if either the LHS or RHS types contain
`TyKind::Error`. In addition to covering the case where
we would have previously updated `if_let_suggestions`, this might
also prevent redundant errors in other cases as well.
Remove `Session.used_attrs` and move logic to `CheckAttrVisitor`
Instead of updating global state to mark attributes as used,
we now explicitly emit a warning when an attribute is used in
an unsupported position. As a side effect, we are to emit more
detailed warning messages (instead of just a generic "unused" message).
`Session.check_name` is removed, since its only purpose was to mark
the attribute as used. All of the callers are modified to use
`Attribute.has_name`
Additionally, `AttributeType::AssumedUsed` is removed - an 'assumed
used' attribute is implemented by simply not performing any checks
in `CheckAttrVisitor` for a particular attribute.
We no longer emit unused attribute warnings for the `#[rustc_dummy]`
attribute - it's an internal attribute used for tests, so it doesn't
mark sense to treat it as 'unused'.
With this commit, a large source of global untracked state is removed.
Instead of updating global state to mark attributes as used,
we now explicitly emit a warning when an attribute is used in
an unsupported position. As a side effect, we are to emit more
detailed warning messages (instead of just a generic "unused" message).
`Session.check_name` is removed, since its only purpose was to mark
the attribute as used. All of the callers are modified to use
`Attribute.has_name`
Additionally, `AttributeType::AssumedUsed` is removed - an 'assumed
used' attribute is implemented by simply not performing any checks
in `CheckAttrVisitor` for a particular attribute.
We no longer emit unused attribute warnings for the `#[rustc_dummy]`
attribute - it's an internal attribute used for tests, so it doesn't
mark sense to treat it as 'unused'.
With this commit, a large source of global untracked state is removed.
Suggest adding a type parameter for impls
Add a new suggestion upon encountering an unknown type in a `impl` that suggests adding a new type parameter. This diagnostic suggests to add a new type parameter even though it may be a const parameter, however after adding the parameter and running rustc again a follow up error steers the user to change the type parameter to a const parameter.
```rust
struct X<const C: ()>();
impl X<C> {}
```
suggests
```
error[E0412]: cannot find type `C` in this scope
--> bar.rs:2:8
|
1 | struct X<const C: ()>();
| ------------------------ similarly named struct `X` defined here
2 | impl X<C> {}
| ^
|
help: a struct with a similar name exists
|
2 | impl X<X> {}
| ^
help: you might be missing a type parameter
|
2 | impl<C> X<C> {}
| ^^^
```
After adding a type parameter the code now becomes
```rust
struct X<const C: ()>();
impl<C> X<C> {}
```
and the error now fully steers the user towards the correct code
```
error[E0747]: type provided when a constant was expected
--> bar.rs:2:11
|
2 | impl<C> X<C> {}
| ^
|
help: consider changing this type parameter to be a `const` generic
|
2 | impl<const C: ()> X<C> {}
| ^^^^^^^^^^^
```
r? `@estebank`
Somewhat related #84946
Handle more span edge cases in generics diagnostics
This should fix invalid suggestions that didn't account for empty bracket pairs (`<>`) or type bindings.
Fix `--remap-path-prefix` not correctly remapping `rust-src` component paths and unify handling of path mapping with virtualized paths
This PR fixes#73167 ("Binaries end up containing path to the rust-src component despite `--remap-path-prefix`") by preventing real local filesystem paths from reaching compilation output if the path is supposed to be remapped.
`RealFileName::Named` introduced in #72767 is now renamed as `LocalPath`, because this variant wraps a (most likely) valid local filesystem path.
`RealFileName::Devirtualized` is renamed as `Remapped` to be used for remapped path from a real path via `--remap-path-prefix` argument, as well as real path inferred from a virtualized (during compiler bootstrapping) `/rustc/...` path. The `local_path` field is now an `Option<PathBuf>`, as it will be set to `None` before serialisation, so it never reaches any build output. Attempting to serialise a non-`None` `local_path` will cause an assertion faliure.
When a path is remapped, a `RealFileName::Remapped` variant is created. The original path is preserved in `local_path` field and the remapped path is saved in `virtual_name` field. Previously, the `local_path` is directly modified which goes against its purpose of "suitable for reading from the file system on the local host".
`rustc_span::SourceFile`'s fields `unmapped_path` (introduced by #44940) and `name_was_remapped` (introduced by #41508 when `--remap-path-prefix` feature originally added) are removed, as these two pieces of information can be inferred from the `name` field: if it's anything other than a `FileName::Real(_)`, or if it is a `FileName::Real(RealFileName::LocalPath(_))`, then clearly `name_was_remapped` would've been false and `unmapped_path` would've been `None`. If it is a `FileName::Real(RealFileName::Remapped{local_path, virtual_name})`, then `name_was_remapped` would've been true and `unmapped_path` would've been `Some(local_path)`.
cc `@eddyb` who implemented `/rustc/...` path devirtualisation
Don't concatenate binders across types
Partially addresses #83737
There's actually two issues that I uncovered in #83737. The first is that we are concatenating bound vars across types, i.e. in
```
F: Fn(&()) -> &mut (dyn Future<Output = ()> + Unpin)
```
the bound vars on `Future` get set as `for<anon>` since those are the binders on `Fn(&()`. This is obviously wrong, since we should only concatenate directly nested trait refs. This is solved here by introducing a new `TraitRefBoundary` scope, that we put around the "syntactical" trait refs and basically don't allow concatenation across.
Now, this alone *shouldn't* be a super terrible problem. At least not until you consider the other issue, which is a much more elusive and harder to design a "perfect" fix. A repro can be seen in:
```
use core::future::Future;
async fn handle<F>(slf: &F)
where
F: Fn(&()) -> &mut (dyn for<'a> Future<Output = ()> + Unpin),
{
(slf)(&()).await;
}
```
Notice the `for<'a>` around `Future`. Here, `'a` is unused, so the `for<'a>` Binder gets changed to a `for<>` Binder in the generator witness, but the "local decl" still has it. This has heavy intersections with region anonymization and erasing. Luckily, it's not *super* common to find this unique set of circumstances. It only became apparently because of the first issue mentioned here. However, this *is* still a problem, so I'm leaving #83737 open.
r? `@nikomatsakis`
Add function core::iter::zip
This makes it a little easier to `zip` iterators:
```rust
for (x, y) in zip(xs, ys) {}
// vs.
for (x, y) in xs.into_iter().zip(ys) {}
```
You can `zip(&mut xs, &ys)` for the conventional `iter_mut()` and
`iter()`, respectively. This can also support arbitrary nesting, where
it's easier to see the item layout than with arbitrary `zip` chains:
```rust
for ((x, y), z) in zip(zip(xs, ys), zs) {}
for (x, (y, z)) in zip(xs, zip(ys, zs)) {}
// vs.
for ((x, y), z) in xs.into_iter().zip(ys).zip(xz) {}
for (x, (y, z)) in xs.into_iter().zip((ys.into_iter().zip(xz)) {}
```
It may also format more nicely, especially when the first iterator is a
longer chain of methods -- for example:
```rust
iter::zip(
trait_ref.substs.types().skip(1),
impl_trait_ref.substs.types().skip(1),
)
// vs.
trait_ref
.substs
.types()
.skip(1)
.zip(impl_trait_ref.substs.types().skip(1))
```
This replaces the tuple-pair `IntoIterator` in #78204.
There is prior art for the utility of this in [`itertools::zip`].
[`itertools::zip`]: https://docs.rs/itertools/0.10.0/itertools/fn.zip.html
This currently creates a field which is always false on GenericParamDefKind for future use when
consts are permitted to have defaults
Update const_generics:default locations
Previously just ignored them, now actually do something about them.
Fix using type check instead of value
Add parsing
This adds all the necessary changes to lower const-generics defaults from parsing.
Change P<Expr> to AnonConst
This matches the arguments passed to instantiations of const generics, and makes it specific to
just anonymous constants.
Attempt to fix lowering bugs
Store HIR attributes in a side table
Same idea as #72015 but for attributes.
The objective is to reduce incr-comp invalidations due to modified attributes.
Notably, those due to modified doc comments.
Implementation:
- collect attributes during AST->HIR lowering, in `LocalDefId -> ItemLocalId -> &[Attributes]` nested tables;
- access the attributes through a `hir_owner_attrs` query;
- local refactorings to use this access;
- remove `attrs` from HIR data structures one-by-one.
Change in behaviour:
- the HIR visitor traverses all attributes at once instead of parent-by-parent;
- attribute arrays are sometimes duplicated: for statements and variant constructors;
- as a consequence, attributes are marked as used after unused-attribute lint emission to avoid duplicate lints.
~~Current bug: the lint level is not correctly applied in `std::backtrace_rs`, triggering an unused attribute warning on `#![no_std]`. I welcome suggestions.~~
Don't hardcode the `v1` prelude in diagnostics, to allow for new preludes.
Instead of looking for `std::prelude::v1`, this changes the two places where that was hardcoded to look for `std::prelude::<anything>` instead.
This is needed for https://github.com/rust-lang/rust/pull/82217.
r? `@estebank`
Fix ICE caused by suggestion with no code substitutions
Change suggestion logic to filter and checking _before_ creating
specific resolution suggestion.
Assert earlier that suggestions contain code substitions to make it
easier in the future to debug invalid uses. If we find this becomes too
noisy in the wild, we can always make the emitter resilient to these
cases and remove the assertions.
Fix#78651.
Only store a LocalDefId in some HIR nodes
Some HIR nodes are guaranteed to be HIR owners: Item, TraitItem, ImplItem, ForeignItem and MacroDef.
As a consequence, we do not need to store the `HirId`'s `local_id`, and we can directly store a `LocalDefId`.
This allows to avoid a bit of the dance with `tcx.hir().local_def_id` and `tcx.hir().local_def_id_to_hir_id` mappings.
Change suggestion logic to filter and checking _before_ creating
specific resolution suggestion.
Assert earlier that suggestions contain code substitions to make it
easier in the future to debug invalid uses. If we find this becomes too
noisy in the wild, we can always make the emitter resilient to these
cases and remove the assertions.
Fix#78651.
Refactor `PrimitiveTypeTable` for Clippy
I removed `PrimitiveTypeTable` and added `PrimTy::ALL` and `PrimTy::from_name` in its place. This allows Clippy to use `PrimTy::from_name` for the `builtin_type_shadow` lint, and a `const` list of primitive types is deleted from Clippy code (the goal). All changes should be a little faster, if anything.
Box the biggest ast::ItemKind variants
This PR is a different approach on https://github.com/rust-lang/rust/pull/81400, aiming to save memory in humongous ASTs.
The three affected item kind enums are:
- `ast::ItemKind` (208 -> 112 bytes)
- `ast::AssocItemKind` (176 -> 72 bytes)
- `ast::ForeignItemKind` (176 -> 72 bytes)
When encountering a name `a` that isn't resolved, but a label `'a` is
found in the current ribs, only suggest `'a` if this name is the value
expression of a `break` statement.
Solve FIXME.
Initialize a few variables directly
Currently they are declared as `mut`, get initialized to a default value, and
then possibly overwritten.
By initializing to the final value directly, they don't need to be `mut` and
it's clear that they don't get mutated elsewhere later on.
Currently they are declared as `mut`, get initialized to a default value, and
then possibly overwritten.
By initializing to the final value directly, they don't need to be `mut` and
it's clear that they don't get mutated elsewhere later on.
Update tests of "unused_lifetimes" lint for async functions and corresponding source code
Before this PR the following code would cause an error:
```
#![deny(unused_lifetimes)]
async fn f<'a>(_: &'a i32) {}
fn main() {}
```
It was happening because of the desugaring of return type in async functions. As a result of the desugaring, the return type contains all lifetimes involved in the function signature. And these lifetimes were interpreted separately from the same in the function scope => so they are unused.
Now, all lifetimes from the return type are interpreted as used. It is also not perfect, but at least this lint doesn't cause wrong errors now.
This PR connected to issues #78522, #77217
Rework diagnostics for wrong number of generic args (fixes#66228 and #71924)
This PR reworks the `wrong number of {} arguments` message, so that it provides more details and contextual hints.
This makes it possible to pass the `Impl` directly to functions, instead
of having to pass each of the many fields one at a time. It also
simplifies matches in many cases.
rustc_ast currently has a few dependencies on rustc_lexer. Ideally, an AST
would not have any dependency its lexer, for minimizing unnecessarily
design-time dependencies. Breaking this dependency would also have practical
benefits, since modifying rustc_lexer would not trigger a rebuild of rustc_ast.
This commit does not remove the rustc_ast --> rustc_lexer dependency,
but it does remove one of the sources of this dependency, which is the
code that handles fuzzy matching between symbol names for making suggestions
in diagnostics. Since that code depends only on Symbol, it is easy to move
it to rustc_span. It might even be best to move it to a separate crate,
since other tools such as Cargo use the same algorithm, and have simply
contain a duplicate of the code.
This changes the signature of find_best_match_for_name so that it is no
longer generic over its input. I checked the optimized binaries, and this
function was duplicated at nearly every call site, because most call sites
used short-lived iterator chains, generic over Map and such. But there's
no good reason for a function like this to be generic, since all it does
is immediately convert the generic input (the Iterator impl) to a concrete
Vec<Symbol>. This has all of the costs of generics (duplicated method bodies)
with no benefit.
Changing find_best_match_for_name to be non-generic removed about 10KB of
code from the optimized binary. I know it's a drop in the bucket, but we have
to start reducing binary size, and beginning to tame over-use of generics
is part of that.
Allow making `RUSTC_BOOTSTRAP` conditional on the crate name
Motivation: This came up in the [Zulip stream](https://rust-lang.zulipchat.com/#narrow/stream/233931-t-compiler.2Fmajor-changes/topic/Require.20users.20to.20confirm.20they.20know.20RUSTC_.E2.80.A6.20compiler-team.23350/near/208403962) for https://github.com/rust-lang/compiler-team/issues/350.
See also https://github.com/rust-lang/cargo/pull/6608#issuecomment-458546258; this implements https://github.com/rust-lang/cargo/issues/6627.
The goal is for this to eventually allow prohibiting setting `RUSTC_BOOTSTRAP` in build.rs (https://github.com/rust-lang/cargo/issues/7088).
## User-facing changes
- `RUSTC_BOOTSTRAP=1` still works; there is no current plan to remove this.
- Things like `RUSTC_BOOTSTRAP=0` no longer activate nightly features. In practice this shouldn't be a big deal, since `RUSTC_BOOTSTRAP` is the opposite of stable and everyone uses `RUSTC_BOOTSTRAP=1` anyway.
- `RUSTC_BOOTSTRAP=x` will enable nightly features only for crate `x`.
- `RUSTC_BOOTSTRAP=x,y` will enable nightly features only for crates `x` and `y`.
## Implementation changes
The main change is that `UnstableOptions::from_environment` now requires
an (optional) crate name. If the crate name is unknown (`None`), then the new feature is not available and you still have to use `RUSTC_BOOTSTRAP=1`. In practice this means the feature is only available for `--crate-name`, not for `#![crate_name]`; I'm interested in supporting the second but I'm not sure how.
Other major changes:
- Added `Session::is_nightly_build()`, which uses the `crate_name` of
the session
- Added `nightly_options::match_is_nightly_build`, a convenience method
for looking up `--crate-name` from CLI arguments.
`Session::is_nightly_build()`should be preferred where possible, since
it will take into account `#![crate_name]` (I think).
- Added `unstable_features` to `rustdoc::RenderOptions`
I'm not sure whether this counts as T-compiler or T-lang; _technically_ RUSTC_BOOTSTRAP is an implementation detail, but it's been used so much it seems like this counts as a language change too.
r? `@joshtriplett`
cc `@Mark-Simulacrum` `@hsivonen`
The main change is that `UnstableOptions::from_environment` now requires
an (optional) crate name. If the crate name is unknown (`None`), then the new feature is not available and you still have to use `RUSTC_BOOTSTRAP=1`. In practice this means the feature is only available for `--crate-name`, not for `#![crate_name]`; I'm interested in supporting the second but I'm not sure how.
Other major changes:
- Added `Session::is_nightly_build()`, which uses the `crate_name` of
the session
- Added `nightly_options::match_is_nightly_build`, a convenience method
for looking up `--crate-name` from CLI arguments.
`Session::is_nightly_build()`should be preferred where possible, since
it will take into account `#![crate_name]` (I think).
- Added `unstable_features` to `rustdoc::RenderOptions`
There is a user-facing change here: things like `RUSTC_BOOTSTRAP=0` no
longer active nightly features. In practice this shouldn't be a big
deal, since `RUSTC_BOOTSTRAP` is the opposite of stable and everyone
uses `RUSTC_BOOTSTRAP=1` anyway.
- Add tests
Check against `Cheat`, not whether nightly features are allowed.
Nightly features are always allowed on the nightly channel.
- Only call `is_nightly_build()` once within a function
- Use booleans consistently for rustc_incremental
Sessions can't be passed through threads, so `read_file` couldn't take a
session. To be consistent, also take a boolean in `write_file_header`.
Suggest calling associated `fn` inside `trait`s
When calling a function that doesn't exist inside of a trait's
associated `fn`, and another associated `fn` in that trait has that
name, suggest calling it with the appropriate fully-qualified path.
Expand the label to be more descriptive.
Prompted by the following user experience:
https://users.rust-lang.org/t/cannot-find-function/50663
When calling a function that doesn't exist inside of a trait's
associated `fn`, and another associated `fn` in that trait has that
name, suggest calling it with the appropriate fully-qualified path.
Expand the label to be more descriptive.
Prompted by the following user experience:
https://users.rust-lang.org/t/cannot-find-function/50663
This commit improves the diagnostic emitted when a tuple struct is being
constructed which has private fields so that private fields are
labelled and the message is improved.
Signed-off-by: David Wood <david@davidtw.co>
This commit improves the tuple struct case added in rust-lang/rust#77341
so that the context is mentioned in more of the message.
Signed-off-by: David Wood <david@davidtw.co>
This commit improves the diagnostic modified in rust-lang/rust#77341 to
suggest not only those variants which do not have fields, but those with
fields (by suggesting with placeholders).
Signed-off-by: David Wood <david@davidtw.co>
resolve: improve "try using the enum's variant"
Fixes#73427.
This PR improves the "try using the enum's variant" suggestion:
- Variants in suggestions would not result in more errors (e.g. use of a struct variant is only suggested if the suggestion can trivially construct that variant). Therefore, suggestions are only emitted for variants that have no fields (since the suggestion can't know what value fields would have).
- Suggestions include the syntax for constructing the variant. If a struct or tuple variant is suggested, then it is constructed in the suggestion - unless in pattern-matching or when arguments are already provided.
- A help message is added which mentions the variants which are no longer suggested.
All of the diagnostic logic introduced by this PR is separated from the normal code path for a successful compilation.
r? `@estebank`
This commit modifies name resolution to emit an error when non-static
lifetimes are used in anonymous constants when the `min_const_generics`
feature is enabled.
Signed-off-by: David Wood <david@davidtw.co>
This commit improves the "try using the enum's variant" suggestion:
- Variants in suggestions would not result in more errors (e.g. use
of a struct variant is only suggested if the suggestion can
trivially construct that variant). Therefore, suggestions are only
emitted for variants that have no fields (since the suggestion
can't know what value fields would have).
- Suggestions include the syntax for constructing the variant. If a
struct or tuple variant is suggested, then it is constructed in the
suggestion - unless in pattern-matching or when arguments are already
provided.
- A help message is added which mentions the variants which are no
longer suggested.
Signed-off-by: David Wood <david@davidtw.co>
Give better diagnostic when using a private tuple struct constructor
Fixes#75907
Some notes:
1. This required some deep changes, including removing a Copy impl for PatKind. If some tests fail, I would still appreciate review on the overall approach
2. this only works with basic patterns (no wildcards for example), and fails if there is any problems getting the visibility of the fields (i am not sure what the failure that can happen in resolve_visibility_speculative, but we check the length of our fields in both cases against each other, so if anything goes wrong, we fall back to the worse error. This could be extended to more patterns
3. this does not yet deal with #75906, but I believe it will be similar
4. let me know if you want more tests
5. doesn't yet at the suggestion that `@yoshuawuyts` suggested at the end of their issue, but that could be added relatively easily (i believe)
