add crashtests for several old unfixed ICEs
Adds several new crashtests for some older ICEs that did not yet have any.
Tests were added for #128097, #119095, #117460 and #126443.
As our implementation of MCP411 nears completion and we begin to
solicit testing, it's no longer reasonable to expect testers to
type or remember `BikeshedIntrinsicFrom`. The name degrades the
ease-of-reading of documentation, and the overall experience of
using compiler safe transmute.
Tentatively, we'll instead adopt `TransmuteFrom`.
This name seems to be the one most likely to be stabilized, after
discussion on Zulip [1]. We may want to revisit the ordering of
`Src` and `Dst` before stabilization, at which point we'd likely
consider `TransmuteInto` or `Transmute`.
[1] https://rust-lang.zulipchat.com/#narrow/stream/216762-project-safe-transmute/topic/What.20should.20.60BikeshedIntrinsicFrom.60.20be.20named.3F
Retroactively feature gate `ConstArgKind::Path`
This puts the lowering introduced by #125915 under a feature gate until we fix the regressions introduced by it. Alternative to whole sale reverting the PR since it didn't seem like a very clean revert and I think this is generally a step in the right direction and don't want to get stuck landing and reverting the PR over and over :)
cc #129137 ``@camelid,`` tests taken from there. beta is branching soon so I think it makes sense to not try and rush that fix through since it wont have much time to bake and if it has issues we can't simply revert it on beta.
Fixes#128016
Return correct HirId when finding body owner in diagnostics
Fixes#129145Fixes#128810
r? ```@compiler-errors```
```rust
fn generic<const N: u32>() {}
trait Collate<const A: u32> {
type Pass;
fn collate(self) -> Self::Pass;
}
impl<const B: u32> Collate<B> for i32 {
type Pass = ();
fn collate(self) -> Self::Pass {
generic::<{ true }>()
//~^ ERROR: mismatched types
}
}
```
When type checking the `{ true }` anon const we would error with a type mismatch. This then results in diagnostics code attempting to check whether its due to a type mismatch with the return type. That logic was implemented by walking up the hir until we reached the body owner, except instead of using the `enclosing_body_owner` function it special cased various hir nodes incorrectly resulting in us walking out of the anon const and stopping at `fn collate` instead.
This then resulted in diagnostics logic inside of the anon consts `ParamEnv` attempting to do trait solving involving the `<i32 as Collate<B>>::Pass` type which ICEs because it is in the wrong environment.
I have rewritten this function to just walk up until it hits the `enclosing_body_owner` and made some other changes since I found this pretty hard to read/understand. Hopefully it's easier to understand now, it also makes it more obvious that this is not implemented in a very principled way and is definitely missing cases :)
Special-case alias ty during the delayed bug emission in `try_from_lit`
This PR tries to fix#116308.
A delayed bug in `try_from_lit` will not be emitted so that the compiler will not ICE when it sees the pair `(ast::LitKind::Int, ty::TyKind::Alias)` in `lit_to_const` (called from `try_from_lit`).
This PR is related to an unstable feature `adt_const_params` (#95174).
r? ``@BoxyUwU``
WF-check struct field types at construction site
Fixes#126272.
Fixes#127299.
Rustc of course already WF-checked the field types at the definition
site, but for error tainting of consts to work properly, there needs to
be an error emitted at the use site. Previously, with no use-site error,
we proceeded with CTFE and ran into ICEs since we are running code with
type errors.
Emitting use-site errors also brings struct-like constructors more in
line with fn-like constructors since they already emit use-site errors
for WF issues.
r? `@BoxyUwU`
Make `validate_mir` ensure the final MIR for all bodies
A lot of the crashes tests use `-Zpolymorphize` or `-Zdump-mir` for their side effect of computing the `optimized_mir` for all bodies, which will uncover bugs with late MIR passes like the inliner. I don't like having all these tests depend on `-Zpolymorphize` (or other hacky ways) for no reason, so this PR extends the `-Zvalidate-mir` flag to ensure `optimized_mir`/`mir_for_ctfe` for all body owners during the analysis phase.
Two thoughts:
1. This could be moved later in the compilation pipeline I guess? I don't really think it matters, though.
1. This could alternatively be expressed using a new flag, though I don't necessarily see much value in separating these.
For example, #128171 could have used this flag, in the `tests/ui/polymorphization/inline-incorrect-early-bound.rs`.
r? mir
Rustc of course already WF-checked the field types at the definition
site, but for error tainting of consts to work properly, there needs to
be an error emitted at the use site. Previously, with no use-site error,
we proceeded with CTFE and ran into ICEs since we are running code with
type errors.
Emitting use-site errors also brings struct-like constructors more in
line with fn-like constructors since they already emit use-site errors
for WF issues.
Update to LLVM 19
The LLVM 19.1.0 final release is planned for Sep 3rd. The rustc 1.82 stable release will be on Oct 17th.
The unstable MC/DC coverage support is temporarily broken by this update. It will be restored by https://github.com/rust-lang/rust/pull/126733. The implementation changed substantially in LLVM 19, and there are no plans to support both the LLVM 18 and LLVM 19 implementation at the same time.
Compatibility note for wasm:
> WebAssembly target support for the `multivalue` target feature has changed when upgrading to LLVM 19. Support for generating functions with multiple returns no longer works and `-Ctarget-feature=+multivalue` has a different meaning than it did in LLVM 18 and prior. The WebAssembly target features `multivalue` and `reference-types` are now both enabled by default, but generated code is not affected by default. These features being enabled are encoded in the `target_features` custom section and may affect downstream tooling such as `wasm-opt` consuming the module, but the actual generated WebAssembly will continue to not use either `multivalue` or `reference-types` by default. There is no longer any supported means to generate a module that has a function with multiple returns.
Related changes:
* https://github.com/rust-lang/rust/pull/127605
* https://github.com/rust-lang/rust/pull/127613
* https://github.com/rust-lang/rust/pull/127654
* https://github.com/rust-lang/rust/pull/128141
* https://github.com/llvm/llvm-project/pull/98933
Fixes https://github.com/rust-lang/rust/issues/121444.
Fixes https://github.com/rust-lang/rust/issues/128212.
Mark `Parser::eat`/`check` methods as `#[must_use]`
These methods return a `bool`, but we probably should either use these values or explicitly throw them away (e.g. when we just want to unconditionally eat a token if it exists).
I changed a few places from `eat` to `expect`, but otherwise I tried to leave a comment explaining why the `eat` was okay.
This also adds a test for the `pattern_type!` macro, which used to silently accept a missing `is` token.
Detect non-lifetime binder params shadowing item params
We should check that `for<T>` shadows `T` from an item in the same way that `for<'a>` shadows `'a` from an item.
r? ``@petrochenkov`` since you're familiar w the nuances of rib kinds
Don't record trait aliases as marker traits
Don't record `#[marker]` on trait aliases, since we use that to check for the (non-presence of) associated types and other things which don't make sense of trait aliases. We already enforce this attr is only applied to a trait.
Also do the same for `#[const_trait]`, which we also enforce is only applied to a trait. This is a drive-by change, but also worthwhile just in case.
Fixes#127222
Remove crashes for misuses of intrinsics
All of these do not crash if the feature gate is removed. An ICE due *opting into* the intrinsics feature gate is not a bug that needs to be fixed, but instead a misuse of an internal-only API.
See https://github.com/rust-lang/compiler-team/issues/620
The last two issues are already closed anyways, but:
Fixes#97501Fixes#111699Fixes#101962
Don't ICE if HIR and middle types disagree in borrowck error reporting
We try to match up the `middle::ty::Ty` and `hir::Ty` types in borrowck error reporting, but due to things like `Self` self type alias, or regular type aliases, these might not match up. Don't ICE.
This PR also tries to recover the error by looking up the self type of the impl in case we see `Self`. The diagnostic is frankly quite confusing, but I also didn't really want to look at it because I don't understand the conflict error reporting logic. 🤷Fixes#121816
Make sure that args are compatible in `resolve_associated_item`
Implements a similar check to the one that we have in projection for GATs (#102488, #123240), where we check that the args of an impl item are compatible before returning it. This is done in `resolve_assoc_item`, which is backing `Instance::resolve`, so this is conceptually generalizing the check from GATs to methods/assoc consts. This is important to make sure that the inliner will only visit and substitute MIR bodies that are compatible w/ their trait definitions.
This shouldn't happen in codegen, but there are a few ways to get the inliner to be invoked (via calls to `optimized_mir`) before codegen, namely polymorphization and CTFE.
Fixes#121957Fixes#120792Fixes#120793Fixes#121063
Just totally fully deny late-bound consts
Kinda don't care about supporting this until we have where clauses on binders. They're super busted and should be reworked in due time, and they are approximately 100% useless until then 😸Fixes#127970Fixes#127009
r? ``@BoxyUwU``
Forbid borrows and unsized types from being used as the type of a const generic under `adt_const_params`
Fixes#112219Fixes#112124Fixes#112125
### Motivation
Currently the `adt_const_params` feature allows writing `Foo<const N: [u8]>` this is entirely useless as it is not possible to write an expression which evaluates to a type that is not `Sized`. In order to actually use unsized types in const generics they are typically written as `const N: &[u8]` which *is* possible to provide a value of.
Unfortunately allowing the types of const parameters to contain references is non trivial (#120961) as it introduces a number of difficult questions about how equality of references in the type system should behave. References in the types of const generics is largely only useful for using unsized types in const generics.
This PR introduces a new feature gate `unsized_const_parameters` and moves support for `const N: [u8]` and `const N: &...` from `adt_const_params` into it. The goal here hopefully is to experiment with allowing `const N: [u8]` to work without references and then eventually completely forbid references in const generics.
Splitting this out into a new feature gate means that stabilization of `adt_const_params` does not have to resolve#120961 which is the only remaining "big" blocker for the feature. Remaining issues after this are a few ICEs and naming bikeshed for `ConstParamTy`.
### Implementation
The implementation is slightly subtle here as we would like to ensure that a stabilization of `adt_const_params` is forwards compatible with any outcome of `unsized_const_parameters`. This is inherently tricky as we do not support unstable trait implementations and we determine whether a type is valid as the type of a const parameter via a trait bound.
There are a few constraints here:
- We would like to *allow for the possibility* of adding a `Sized` supertrait to `ConstParamTy` in the event that we wind up opting to not support unsized types and instead requiring people to write the 'sized version', e.g. `const N: [u8; M]` instead of `const N: [u8]`.
- Crates should be able to enable `unsized_const_parameters` and write trait implementations of `ConstParamTy` for `!Sized` types without downstream crates that only enable `adt_const_params` being able to observe this (required for std to be able to `impl<T> ConstParamTy for [T]`
Ultimately the way this is accomplished is via having two traits (sad), `ConstParamTy` and `UnsizedConstParamTy`. Depending on whether `unsized_const_parameters` is enabled or not we change which trait is used to check whether a type is allowed to be a const parameter.
Long term (when stabilizing `UnsizedConstParamTy`) it should be possible to completely merge these traits (and derive macros), only having a single `trait ConstParamTy` and `macro ConstParamTy`.
Under `adt_const_params` it is now illegal to directly refer to `ConstParamTy` it is only used as an internal impl detail by `derive(ConstParamTy)` and checking const parameters are well formed. This is necessary in order to ensure forwards compatibility with all possible future directions for `feature(unsized_const_parameters)`.
Generally the intuition here should be that `ConstParamTy` is the stable trait that everything uses, and `UnsizedConstParamTy` is that plus unstable implementations (well, I suppose `ConstParamTy` isn't stable yet :P).
Represent type-level consts with new-and-improved `hir::ConstArg`
### Summary
This is a step toward `min_generic_const_exprs`. We now represent all const
generic arguments using an enum that differentiates between const *paths*
(temporarily just bare const params) and arbitrary anon consts that may perform
computations. This will enable us to cleanly implement the `min_generic_const_args`
plan of allowing the use of generics in paths used as const args, while
disallowing their use in arbitrary anon consts. Here is a summary of the salient
aspects of this change:
- Add `current_def_id_parent` to `LoweringContext`
This is needed to track anon const parents properly once we implement
`ConstArgKind::Path` (which requires moving anon const def-creation
outside of `DefCollector`).
- Create `hir::ConstArgKind` enum with `Path` and `Anon` variants. Use it in the
existing `hir::ConstArg` struct, replacing the previous `hir::AnonConst` field.
- Use `ConstArg` for all instances of const args. Specifically, use it instead
of `AnonConst` for assoc item constraints, array lengths, and const param
defaults.
- Some `ast::AnonConst`s now have their `DefId`s created in
rustc_ast_lowering rather than `DefCollector`. This is because in some
cases they will end up becoming a `ConstArgKind::Path` instead, which
has no `DefId`. We have to solve this in a hacky way where we guess
whether the `AnonConst` could end up as a path const since we can't
know for sure until after name resolution (`N` could refer to a free
const or a nullary struct). If it has no chance as being a const
param, then we create a `DefId` in `DefCollector` -- otherwise we
decide during ast_lowering. This will have to be updated once all path
consts use `ConstArgKind::Path`.
- We explicitly use `ConstArgHasType` for array lengths, rather than
implicitly relying on anon const type feeding -- this is due to the
addition of `ConstArgKind::Path`.
- Some tests have their outputs changed, but the changes are for the
most part minor (including removing duplicate or almost-duplicate
errors). One test now ICEs, but it is for an incomplete, unstable
feature and is now tracked at https://github.com/rust-lang/rust/issues/127009.
### Followup items post-merge
- Use `ConstArgKind::Path` for all const paths, not just const params.
- Fix (no github dont close this issue) #127009
- If a path in generic args doesn't resolve as a type, try to resolve as a const
instead (do this in rustc_resolve). Then remove the special-casing from
`rustc_ast_lowering`, so that all params will automatically be lowered as
`ConstArgKind::Path`.
- (?) Consider making `const_evaluatable_unchecked` a hard error, or at least
trying it in crater
r? `@BoxyUwU`
Fix ambiguous cases of multiple & in elided self lifetimes
This change proposes simpler rules to identify the lifetime on `self` parameters which may be used to elide a return type lifetime.
## The old rules
(copied from [this comment](https://github.com/rust-lang/rust/pull/117967#discussion_r1420554242))
Most of the code can be found in [late.rs](https://doc.rust-lang.org/stable/nightly-rustc/src/rustc_resolve/late.rs.html) and acts on AST types. The function [resolve_fn_params](https://doc.rust-lang.org/stable/nightly-rustc/src/rustc_resolve/late.rs.html#2006), in the success case, returns a single lifetime which can be used to elide the lifetime of return types.
Here's how:
* If the first parameter is called self then we search that parameter using "`self` search rules", below
* If no unique applicable lifetime was found, search all other parameters using "regular parameter search rules", below
(In practice the code does extra work to assemble good diagnostic information, so it's not quite laid out like the above.)
### `self` search rules
This is primarily handled in [find_lifetime_for_self](https://doc.rust-lang.org/stable/nightly-rustc/src/rustc_resolve/late.rs.html#2118) , and is described slightly [here](https://github.com/rust-lang/rust/issues/117715#issuecomment-1813115477) already. The code:
1. Recursively walks the type of the `self` parameter (there's some complexity about resolving various special cases, but it's essentially just walking the type as far as I can see)
2. Each time we find a reference anywhere in the type, if the **direct** referent is `Self` (either spelled `Self` or by some alias resolution which I don't fully understand), then we'll add that to a set of candidate lifetimes
3. If there's exactly one such unique lifetime candidate found, we return this lifetime.
### Regular parameter search rules
1. Find all the lifetimes in each parameter, including implicit, explicit etc.
2. If there's exactly one parameter containing lifetimes, and if that parameter contains exactly one (unique) lifetime, *and if we didn't find a `self` lifetime parameter already*, we'll return this lifetime.
## The new rules
There are no changes to the "regular parameter search rules" or to the overall flow, only to the `self` search rules which are now:
1. Recursively walks the type of the `self` parameter, searching for lifetimes of reference types whose referent **contains** `Self`.[^1]
2. Keep a record of:
* Whether 0, 1 or n unique lifetimes are found on references encountered during the walk
4. If no lifetime was found, we don't return a lifetime. (This means other parameters' lifetimes may be used for return type lifetime elision).
5. If there's one lifetime found, we return the lifetime.
6. If multiple lifetimes were found, we abort elision entirely (other parameters' lifetimes won't be used).
[^1]: this prevents us from considering lifetimes from inside of the self-type
## Examples that were accepted before and will now be rejected
```rust
fn a(self: &Box<&Self>) -> &u32
fn b(self: &Pin<&mut Self>) -> &String
fn c(self: &mut &Self) -> Option<&Self>
fn d(self: &mut &Box<Self>, arg: &usize) -> &usize // previously used the lt from arg
```
### Examples that change the elided lifetime
```rust
fn e(self: &mut Box<Self>, arg: &usize) -> &usize
// ^ new ^ previous
```
## Examples that were rejected before and will now be accepted
```rust
fn f(self: &Box<Self>) -> &u32
```
---
*edit: old PR description:*
```rust
struct Concrete(u32);
impl Concrete {
fn m(self: &Box<Self>) -> &u32 {
&self.0
}
}
```
resulted in a confusing error.
```rust
impl Concrete {
fn n(self: &Box<&Self>) -> &u32 {
&self.0
}
}
```
resulted in no error or warning, despite apparent ambiguity over the elided lifetime.
Fixes https://github.com/rust-lang/rust/issues/117715
This is a very large commit since a lot needs to be changed in order to
make the tests pass. The salient changes are:
- `ConstArgKind` gets a new `Path` variant, and all const params are now
represented using it. Non-param paths still use `ConstArgKind::Anon`
to prevent this change from getting too large, but they will soon use
the `Path` variant too.
- `ConstArg` gets a distinct `hir_id` field and its own variant in
`hir::Node`. This affected many parts of the compiler that expected
the parent of an `AnonConst` to be the containing context (e.g., an
array repeat expression). They have been changed to check the
"grandparent" where necessary.
- Some `ast::AnonConst`s now have their `DefId`s created in
rustc_ast_lowering rather than `DefCollector`. This is because in some
cases they will end up becoming a `ConstArgKind::Path` instead, which
has no `DefId`. We have to solve this in a hacky way where we guess
whether the `AnonConst` could end up as a path const since we can't
know for sure until after name resolution (`N` could refer to a free
const or a nullary struct). If it has no chance as being a const
param, then we create a `DefId` in `DefCollector` -- otherwise we
decide during ast_lowering. This will have to be updated once all path
consts use `ConstArgKind::Path`.
- We explicitly use `ConstArgHasType` for array lengths, rather than
implicitly relying on anon const type feeding -- this is due to the
addition of `ConstArgKind::Path`.
- Some tests have their outputs changed, but the changes are for the
most part minor (including removing duplicate or almost-duplicate
errors). One test now ICEs, but it is for an incomplete, unstable
feature and is now tracked at #127009.
