Implement rustc part of RFC 3127 trim-paths
This PR implements (or at least tries to) [RFC 3127 trim-paths](https://github.com/rust-lang/rust/issues/111540), the rustc part. That is `-Zremap-path-scope` with all of it's components/scopes.
`@rustbot` label: +F-trim-paths
Normalize alloc-id in tests.
AllocIds are globally numbered in a rustc invocation. This makes them very sensitive to changes unrelated to what is being tested. This commit normalizes them by renumbering, in order of appearance in the output.
The renumbering allows to keep the identity, that a simple `allocN` wouldn't. This is useful when we have memory dumps.
cc `@saethlin`
r? `@oli-obk`
Remove cgu_reuse_tracker from Session
This removes a bit of global mutable state.
It will now miss post-lto cgu reuse when ThinLTO determines that a cgu doesn't get changed, but there weren't any tests for this anyway and a test for it would be fragile to the exact implementation of ThinLTO in LLVM.
Implement `-Clink-self-contained=-linker` opt out
This implements the `-Clink-self-contained` opt out necessary to switch to lld by changing rustc's defaults instead of cargo's.
Components that are enabled and disabled on the CLI are recorded, for the purpose of being merged with the ones which the target spec will declare (I'll open another PR for that tomorrow, for easier review).
For MCP510, we now check whether using the self-contained linker is disabled on the CLI. Right now it would only be sensible to with `-Zgcc-ld=lld` (and I'll add some checks that we don't both enable and disable a component on the CLI in a future PR), but the goal is to simplify adding the check of the target's enabled components here in the follow-up PRs.
r? `@petrochenkov`
Bring back generic parameters for indices in rustc_abi and make it compile on stable
This effectively reverses https://github.com/rust-lang/rust/pull/107163, allowing rust-analyzer to depend on this crate again,
It also moves some glob imports / expands them in the first commit because they made it more difficult for me to reason about things.
Update windows ffi bindings
Bump `windows-bindgen` to version 0.51.1. This brings with it some changes to the generated FFI bindings, but little that affects the code.
One change that does have more of an impact is `SOCKET` being `usize` instead of either `u64` or `u32` (as is used in std's public `SOCKET` type). However, it's now easy enough to abstract over that difference.
Finally I added a few new bindings that are likely to be used in pending PRs, mostly to make sure they're ok with the new metadata.
r? libs
Split out the stable part of smir into its own crate to prevent accidental usage of forever unstable things
Some groundwork for being able to work on https://github.com/rust-lang/project-stable-mir/issues/27 at all
r? `@spastorino`
- Some comment fixes.
- Make some functions unsafe.
- Make helpers module private.
- Rebase on master
- Update r-efi to v4.2.0
Signed-off-by: Ayush Singh <ayushsingh1325@gmail.com>
This reduces the amount of dependencies pulling in atty.
```
Removing env_logger v0.9.3
```
Signed-off-by: Martin Kröning <martin.kroening@eonerc.rwth-aachen.de>
This reduces the amount of dependencies pulling in atty.
```
Updating colored v2.0.0 -> v2.0.4
Updating tracing-tree v0.2.3 -> v0.2.4
```
Signed-off-by: Martin Kröning <martin.kroening@eonerc.rwth-aachen.de>
Add initial libstd support for Xous
This patchset adds some minimal support to the tier-3 target `riscv32imac-unknown-xous-elf`. The following features are supported:
* alloc
* thread creation and joining
* thread sleeping
* thread_local
* panic_abort
* mutex
* condvar
* stdout
Additionally, internal support for the various Xous primitives surrounding IPC have been added as part of the Xous FFI. These may be exposed as part of `std::os::xous::ffi` in the future, however for now they are not public.
This represents the minimum viable product. A future patchset will add support for networking and filesystem support.
Avoid blessing cargo deps's source code in ui tests
Before this PR, the source code of dependencies was included in UI test error messages whenever possible. Unfortunately, "whenever possible" means in some cases the source code wouldn't be injected, resulting in a test failure.
One such case is when `$CARGO_HOME` is remapped to something that is not present on disk [^1]. As the remapped path doesn't exist on disk, the source code wouldn't be showed in `tests/ui/issues/issue-21763.rs`:
```diff
= note: required for `hashbrown::raw::RawTable<(Rc<()>, Rc<()>)>` to implement `Send`
note: required because it appears within the type `HashMap<Rc<()>, Rc<()>, RandomState>`
--> $HASHBROWN_SRC_LOCATION
- |
-LL | pub struct HashMap<K, V, S = DefaultHashBuilder, A: Allocator + Clone = Global> {
- | ^^^^^^^
note: required because it appears within the type `HashMap<Rc<()>, Rc<()>>`
--> $SRC_DIR/std/src/collections/hash/map.rs:LL:COL
note: required by a bound in `foo`
```
This PR fixes the problem by always hiding dependencies source code in the error messages generated during UI tests. This is implemented with a new internal flag, `-Z ignore-directory-in-diagnostics-source-blocks=$path`, which compiletest passes during UI tests. Once this is merged, remapping the Cargo home will be supported.
This PR is best reviewed commit-by-commit.
[^1]: After being puzzled for a bit, I discovered why this never impacted `rust-lang/rust`: we don't remap `$CARGO_HOME` 😅. Instead, we set `$CARGO_HOME` to `/cargo` in CI, which sort-of-but-not-really achieves the same effect.
Refactor `opt-dist` to simplify local building
This PR refactors the `opt-dist` tool to make it easier to invoke it locally, outside of CI, and thus simplify building PGO/BOLT optimized `rustc` builds e.g. for distro maintainers. It should also make it easier to run the PGO/BOLT workflow locally e.g. to profile performance or debug issues (looking at you, https://github.com/rust-lang/rust/pull/115554).
Replace `rustc_data_structures` dependency with `rustc_index` in `rustc_parse_format`
`rustc_data_structures` is only used for the `static_assert_size` macro, yet that is defined in `rustc_index` and merely re-exported. `rustc_index` is a lot more lightweight than `rustc_data_structures` which would make this a lot more reusable for rust-analyzer.
Rollup of 6 pull requests
Successful merges:
- #111580 (Don't ICE on layout computation failure)
- #114923 (doc: update lld-flavor ref)
- #115174 (tests: add test for #67992)
- #115187 (Add new interface to smir)
- #115300 (Tweaks and improvements on SMIR around generics_of and predicates_of)
- #115340 (some more is_zst that should be is_1zst)
r? `@ghost`
`@rustbot` modify labels: rollup
The Xous operating system has no libc, and relies on `compiler_builtins`
to supply basic functions such as `memcpy`. Bump the version to 0.1.101
to pull in a version of this crate with the flag enabled for Xous.
Signed-off-by: Sean Cross <sean@xobs.io>
Make `unconditional_recursion` warning detect recursive drops
Closes#55388
Also closes#50049 unless we want to keep it for the second example which this PR does not solve, but I think it is better to track that work in #57965.
r? `@oli-obk` since you are the mentor for #55388
Unresolved questions:
- [x] There are two false positives that must be fixed before merging (see diff). I suspect the best way to solve them is to perform analysis after drop elaboration instead of before, as now, but I have not explored that any further yet. Could that be an option? **Answer:** Yes, that solved the problem.
`@rustbot` label +T-compiler +C-enhancement +A-lint
Lots of tiny incremental simplifications of `EmitterWriter` internals
ignore the first commit, it's https://github.com/rust-lang/rust/pull/114088 squashed and rebased, but it's needed to use to use `derive_setters`, as they need a newer `syn` version.
Then this PR starts out with removing many arguments that are almost always defaulted to `None` or `false` and replace them with builder methods that can set these fields in the few cases that want to set them.
After that it's one commit after the other that removes or merges things until everything becomes some very simple trait objects
Update lexer emoji diagnostics to Unicode 15.0
This replaces the `unic-emoji-char` dep tree (which hasn't been updated for a while) with `unicode-properties` crate which contains Unicode 15.0 data.
Improves diagnostics for added emoji characters in recent years. (See tests).
cc #101840
cc ``@Manishearth``
Verify that all crate sources are in sync
This ensures that rustc will not attempt to link against a cdylib as if it is a rust dylib when an rlib for the same crate is available. Previously rustc didn't actually check if any further formats of a crate which has been loaded are of the same version and if they are actually valid. This caused a cdylib to be interpreted as rust dylib as soon as the corresponding rlib was loaded. As cdylibs don't export any rust symbols, linking would fail if rustc decides to link against the cdylib rather than the rlib.
Two crates depended on the previous behavior by separately compiling a test crate as both rlib and dylib. These have been changed to capture their original spirit to the best of my ability while still working when rustc verifies that all crates are in sync. It is unlikely that build systems depend on the current behavior and in any case we are taking a lot of measures to ensure that any change to either the source or the compilation options (including crate type) results in rustc rejecting it as incompatible. We merely didn't do this check here for now obsolete perf reasons.
Fixes https://github.com/rust-lang/rust/issues/10786
Fixes https://github.com/rust-lang/rust/issues/82151
Fixes https://github.com/rust-lang/rust/issues/82972
Closes https://github.com/bevy-cheatbook/bevy-cheatbook/issues/114
Implement rust-lang/compiler-team#578.
When an ICE is encountered on nightly releases, the new rustc panic
handler will also write the contents of the backtrace to disk. If any
`delay_span_bug`s are encountered, their backtrace is also added to the
file. The platform and rustc version will also be collected.
"no method" errors on standard library types
The standard library developer can annotate methods on e.g.
`BTreeSet::push` with `#[rustc_confusables("insert")]`. When the user
mistypes `btreeset.push()`, `BTreeSet::insert` will be suggested if
there are no other candidates to suggest.
Implement a few more rvalue translation to smir
Add the implementation for a few more RValue variants. For now, I simplified the stable version of `RValue::Ref` by removing the notion of Region.
r? `@oli-obk`
The already-small RLS shim can get a little smaller, and faster to
build, if we drop the serde-derive dependency and decode the one
"method" field it needs manually from `serde_json::Value`.
Port PGO/LTO/BOLT optimized build pipeline to Rust
This PR ports the `stage-build.py` PGO/LTO/BOLT optimization script from Python to Rust, to make it easier to use dependencies, and make it a bit more robust. The PR switches both the Linux and Windows dist runners to the Rust script and removes the old Python script.
Funnily enough, the Rust port has less lines of code than the Python script :) I think that clearly shows that the Python script really lacked dependencies.
Revert the lexing of `c"…"` string literals
Fixes \[after beta-backport\] #113235.
Further progress is tracked in #113333.
This PR *manually* reverts parts of #108801 (since a git-revert would've been too coarse-grained & messy)
and git-reverts #111647.
CC `@fee1-dead` (#108801) `@klensy` (#111647)
r? `@compiler-errors`
`@rustbot` label F-c_str_literals beta-nominated
Remove chalk support from the compiler
Removes chalk (`-Ztrait-solver=chalk`) from the compiler and prunes any dead code resulting from this, mainly:
* Remove the chalk compatibility layer in `compiler/rustc_traits/src/chalk`
* Remove the chalk flag `-Ztrait-solver=chalk` and its `TraitEngine` implementation
* Remove `TypeWellFormedFromEnv` (and its many `bug!()` match arms)
* Remove the chalk migration mode from compiletest
* Remove the `chalkify` UI tests (do we want to keep any of these, but migrate them to `-Ztrait-solver=next`??)
Fulfills rust-lang/types-team#93.
r? `@jackh726`
There's currently a deadlock with tracing when RUSTC_LOG is enabled.
Downgrade tracing-core for now to avoid blocking the other updates.
syns upgrades cause some nontrivial changes in the diagnostics derive tests,
which are best dealt with in another PR.
Implement most of MCP510
This implements most of what remains to be done for MCP510:
- turns `-C link-self-contained` into a `+`/`-` list of components, like `-C link-self-contained=+linker,+crto,+libc,+unwind,+sanitizers,+mingw`. The scaffolding is present for all these expected components to be implemented and stabilized in the future on their own time. This PR only handles the `-Zgcc-ld=lld` subset of these link-self-contained components as `-Clink-self-contained=+linker`
- handles `-C link-self-contained=y|n` as-is today, for compatibility with `rustc_codegen_ssa:🔙🔗:self_contained`'s [explicit opt-in and opt-out](9eee230cd0/compiler/rustc_codegen_ssa/src/back/link.rs (L1671-L1676)).
- therefore supports our plan to opt out of `rust-lld` (when it's enabled by default) even for current `-Clink-self-contained` users, with e.g. `-Clink-self-contained -Clink-self-contained=-linker`
- turns `add_gcc_ld_path` into its expected final form, by using the `-C link-self-contained=+linker` CLI flag, and whether the `LinkerFlavor` has the expected `Cc::Yes` and `Lld::Yes` shape (this is not yet the case in practice for any CLI linker flavor)
- makes the [new clean linker flavors](https://github.com/rust-lang/rust/pull/96827#issuecomment-1208441595) selectable in the CLI in addition to the legacy ones, in order to opt-in to using `cc` and `lld` to emulate `-Zgcc-ld=lld`
- ensure the new `-C link-self-contained` components, and `-C linker-flavor`s are unstable, and require `-Z unstable-options` to be used
The up-to-date set of flags for the future stable CLI version of `-Zgcc-ld=lld` is currently: `-Clink-self-contained=+linker -Clinker-flavor=gnu-lld-cc -Zunstable-options`.
It's possible we'll also need to do something for distros that don't ship `rust-lld`, but maybe there are already no tool search paths to be added to `cc` in this situation anyways.
r? `@petrochenkov`
Fix unset e_flags in ELF files generated for AVR targets
Closes#106576
~~Sort-of blocked by gimli-rs/object#500~~ (merged)
I'm not sure whether the list of AVR CPU names is okay here. Maybe it could be moved out-of-line to improve the readability of the function.
rust-installer: migrate to clap 4.2, change to 2021 edition and fix few clippy lints
Updated rust-installer to clap 4.2, dropping last user of clap v3; changes to 2021 edition, fixes few clippy warns.
Update field-offset and enable unstable_offset_of
This makes the compiler use the builtin `offset_of!()` macro, through the wrappers in memoffset and then in field-offset.
cc #111839
Write to stdout if `-` is given as output file
With this PR, if `-o -` or `--emit KIND=-` is provided, output will be written to stdout instead. Binary output (those of type `obj`, `llvm-bc`, `link` and `metadata`) being written this way will result in an error unless stdout is not a tty. Multiple output types going to stdout will trigger an error too, as they will all be mixded together.
This implements https://github.com/rust-lang/compiler-team/issues/431
The idea behind the changes is to introduce an `OutFileName` enum that represents the output - be it a real path or stdout - and to use this enum along the code paths that handle different output types.
If `-o -` or `--emit KIND=-` is provided, output will be written
to stdout instead. Binary output (`obj`, `llvm-bc`, `link` and
`metadata`) being written this way will result in an error unless
stdout is not a tty. Multiple output types going to stdout will
trigger an error too, as they will all be mixded together.
