Fix `Parser::look_ahead`
`Parser::look_ahead` has a slow but simple general case, and a fast special case that is hit most of the time. But the special case is buggy and behaves differently to the general case. There are also no unit tests. This PR fixes all of this, resulting in a `Parser::look_ahead` that is equally fast, slightly simpler, more correct, and better tested.
r? `@davidtwco`
This new special case is simpler than the old special case because it
only is used when `dist == 1`. But that's still enough to cover ~98% of
cases. This results in equivalent performance to the old special case,
and identical behaviour as the general case.
The general case at the bottom of `look_ahead` is slow, because it
clones the token cursor. Above it there is a special case for
performance that is hit most of the time and avoids the cloning.
Unfortunately, its behaviour differs from the general case in two ways.
- When within a pair of delimiters, if you look any distance past the
closing delimiter you get the closing delimiter instead of what comes
after the closing delimiter.
- It uses `tree_cursor.look_ahead(dist - 1)` which totally confuses
tokens with token trees. This means that only the first token in a
token tree will be seen. E.g. in a sequence like `{ a }` the `a` and
`}` will be skipped over. Bad!
It's likely that these differences weren't noticed before now because
the use of `look_ahead` in the parser is limited to small distances and
relatively few contexts.
Removing the special case causes slowdowns up of to 2% on a range of
benchmarks. The next commit will add a new, correct special case to
regain that lost performance.
Go over all structured parser suggestions and make them verbose style.
When suggesting to add or remove delimiters, turn them into multiple suggestion parts.
The new condition is equivalent in practice, but it's much more obvious
that it would result in an empty range, because the condition lines up
with the contents of the iterator.
There's a comment saying we don't do it for performance reasons, but it
doesn't actually affect performance.
The commit also tweaks the control flow, to make clearer that two code
paths are mutually exclusive.
Currently the second element is a `Vec<(FlatToken, Spacing)>`. But the
vector always has zero or one elements, and the `FlatToken` is always
`FlatToken::AttrTarget` (which contains an `AttributesData`), and the
spacing is always `Alone`. So we can simplify it to
`Option<AttributesData>`.
An assertion in `to_attr_token_stream` can can also be removed, because
`new_tokens.len()` was always 0 or 1, which means than `range.len()`
is always greater than or equal to it, because `range.is_empty()` is
always false (as per the earlier assertion).
And update the comment. Clearly the return type of this function was
changed at some point in the past, but its name and comment weren't
updated to match.
The number of source code bytes can't exceed a `u32`'s range, so a token
position also can't. This reduces the size of `Parser` and
`LazyAttrTokenStreamImpl` by eight bytes each.
Move binder and polarity parsing into `parse_generic_ty_bound`
Let's pull out the parts of #127054 which just:
1. Make the parsing code less confusing
2. Fix `?use<>` (to correctly be denied)
3. Improve `T: for<'a> 'a` diagnostics
This should have no user-facing effects on stable parsing.
r? fmease
It currently goes one token too far.
Example: line 259 of `tests/ui/abi/compatibility.rs`:
```
test_abi_compatible!(fn_fn, fn(), fn(i32) -> i32);
```
This commit changes the span for the second element from `fn(),` to
`fn()`, i.e. removes the extraneous comma.
coverage: Overhaul validation of the `#[coverage(..)]` attribute
This PR makes sweeping changes to how the (currently-unstable) coverage attribute is validated:
- Multiple coverage attributes on the same item/expression are now treated as an error.
- The attribute must always be `#[coverage(off)]` or `#[coverage(on)]`, and the error messages for this are more consistent.
- A trailing comma is still allowed after off/on, since that's part of the normal attribute syntax.
- Some places that silently ignored a coverage attribute now produce an error instead.
- These cases were all clearly bugs.
- Some places that ignored a coverage attribute (with a warning) now produce an error instead.
- These were originally added as lints, but I don't think it makes much sense to knowingly allow new attributes to be used in meaningless places.
- Some of these errors might soon disappear, if it's easy to extend recursive coverage attributes to things like modules and impl blocks.
---
One of the goals of this PR is to lay a more solid foundation for making the coverage attribute recursive, so that it applies to all nested functions/closures instead of just the one it is directly attached to.
Fixes#126658.
This PR incorporates #126659, which adds more tests for validation of the coverage attribute.
`@rustbot` label +A-code-coverage
Special case when a code line only has multiline span starts
Minimize multline span overlap when there are multiple of them starting on the same line:
```
3 | X0 Y0 Z0
| _____^ - -
| | _______| |
| || _________|
4 | ||| X1 Y1 Z1
5 | ||| X2 Y2 Z2
| |||____^__-__- `Z` label
| ||_____|__|
| |______| `Y` is a good letter too
| `X` is a good letter
```
Add hard error and migration lint for unsafe attrs
More implementation work for https://github.com/rust-lang/rust/issues/123757
This adds the migration lint for unsafe attributes, as well as making it a hard error in Rust 2024.
Merge `PatParam`/`PatWithOr`, and `Expr`/`Expr2021`, for a few reasons.
- It's conceptually nice, because the two pattern kinds and the two
expression kinds are very similar.
- With expressions in particular, there are several places where both
expression kinds get the same treatment.
- It removes one unreachable match arm.
- Most importantly, for #124141 I will need to introduce a new type
`MetaVarKind` that is very similar to `NonterminalKind`, but records a
couple of extra fields for expression metavars. It's nicer to have a
single `MetaVarKind::Expr` expression variant to hold those extra
fields instead of duplicating them across two variants
`MetaVarKind::{Expr,Expr2021}`. And then it makes sense for patterns
to be treated the same way, and for `NonterminalKind` to also be
treated the same way.
I also clarified the comments, because I have long found them a little
hard to understand.
`StaticForeignItem` and `StaticItem` are the same
The struct `StaticItem` and `StaticForeignItem` are the same, so remove `StaticForeignItem`. Having them be separate is unique to `static` items -- unlike `ForeignItemKind::{Fn,TyAlias}`, which use the normal AST item.
r? ``@spastorino`` or ``@oli-obk``
Make edition dependent `:expr` macro fragment act like the edition-dependent `:pat` fragment does
Parse the `:expr` fragment as `:expr_2021` in editions <=2021, and as `:expr` in edition 2024. This is similar to how we parse `:pat` as `:pat_param` in edition <=2018 and `:pat_with_or` in >=2021, and means we can get rid of a span dependency from `nonterminal_may_begin_with`.
Specifically, this fixes a theoretical regression since the `expr_2021` macro fragment previously would allow `const {}` if the *caller* is edition 2024. This is inconsistent with the way that the `pat` macro fragment was upgraded, and also leads to surprising behavior when a macro *caller* crate upgrades to edtion 2024, since they may have parsing changes that they never asked for (with no way of opting out of it).
This PR also allows using `expr_2021` in all editions. Why was this was disallowed in the first place? It's purely additive, and also it's still feature gated?
r? ```@fmease``` ```@eholk``` cc ```@vincenzopalazzo```
cc #123865
Tracking:
- https://github.com/rust-lang/rust/issues/123742
Improve conflict marker recovery
<!--
If this PR is related to an unstable feature or an otherwise tracked effort,
please link to the relevant tracking issue here. If you don't know of a related
tracking issue or there are none, feel free to ignore this.
This PR will get automatically assigned to a reviewer. In case you would like
a specific user to review your work, you can assign it to them by using
r? <reviewer name>
-->
closes#113826
r? ```@estebank``` since you reviewed #115413
cc: ```@rben01``` since you opened up the issue in the first place
Properly gate `safe` keyword in pre-expansion
This PR gates `safe` keyword in pre-expansion contexts. Should mitigate the fallout of https://github.com/rust-lang/rust/issues/126755, which is that `safe` is now usable on beta lol.
r? `@spastorino` or `@oli-obk`
cc #124482 tracking #123743
Clean up some comments near `use` declarations
#125443 will reformat all `use` declarations in the repository. There are a few edge cases involving comments on `use` declarations that require care. This PR cleans up some clumsy comment cases, taking us a step closer to #125443 being able to merge.
r? ``@lqd``
We currently use `can_begin_literal_maybe_minus` in a couple of places
where only string literals are allowed. This commit introduces a
more specific function, which makes things clearer. It doesn't change
behaviour because the two functions affected (`is_unsafe_foreign_mod`
and `check_keyword_case`) are always followed by a call to `parse_abi`,
which checks again for a string literal.
It's clearer this way, because the `Interpolated` cases in
`can_begin_const_arg` and `is_pat_range_end_start` are more permissive
than the `Interpolated` cases in `can_begin_literal_maybe_minus`.
Fix duplicated attributes on nonterminal expressions
This PR fixes a long-standing bug (#86055) whereby expression attributes can be duplicated when expanded through declarative macros.
First, consider how items are parsed in declarative macros:
```
Items:
- parse_nonterminal
- parse_item(ForceCollect::Yes)
- parse_item_
- attrs = parse_outer_attributes
- parse_item_common(attrs)
- maybe_whole!
- collect_tokens_trailing_token
```
The important thing is that the parsing of outer attributes is outside token collection, so the item's tokens don't include the attributes. This is how it's supposed to be.
Now consider how expression are parsed in declarative macros:
```
Exprs:
- parse_nonterminal
- parse_expr_force_collect
- collect_tokens_no_attrs
- collect_tokens_trailing_token
- parse_expr
- parse_expr_res(None)
- parse_expr_assoc_with
- parse_expr_prefix
- parse_or_use_outer_attributes
- parse_expr_dot_or_call
```
The important thing is that the parsing of outer attributes is inside token collection, so the the expr's tokens do include the attributes, i.e. in `AttributesData::tokens`.
This PR fixes the bug by rearranging expression parsing to that outer attribute parsing happens outside of token collection. This requires a number of small refactorings because expression parsing is somewhat complicated. While doing so the PR makes the code a bit cleaner and simpler, by eliminating `parse_or_use_outer_attributes` and `Option<AttrWrapper>` arguments (in favour of the simpler `parse_outer_attributes` and `AttrWrapper` arguments), and simplifying `LhsExpr`.
r? `@petrochenkov`
It now parses outer attributes before collecting tokens. This avoids the
problem where the outer attribute tokens were being stored twice -- for
the attribute tokesn, and also for the expression tokens.
Fixes#86055.
Combine `NotYetParsed` and `AttributesParsed` into a single variant,
because (a) that reflects the structure of the code that consumes
`LhsExpr`, and (b) because that variant will have the `Option` removed
in a later commit.
The `Option<AttrWrapper>` one maps to the first two variants, and the
`P<Expr>` one maps to the third. Weird. The code is shorter and clearer
without them.
The call in `parse_expr_prefix` for the `++` case passes an empty
`attrs`, but it doesn' need to. This commit changes it to pass the
parsed `attrs`, which doesn't change any behaviour. As a result,
`parse_expr_dot_or_call` no longer needs an `Option` argument, and no
longer needs to call `parse_or_use_outer_attributes`.
delegation: Implement glob delegation
Support delegating to all trait methods in one go.
Overriding globs with explicit definitions is also supported.
The implementation is generally based on the design from https://github.com/rust-lang/rfcs/pull/3530#issuecomment-2020869823, but unlike with list delegation in https://github.com/rust-lang/rust/pull/123413 we cannot expand glob delegation eagerly.
We have to enqueue it into the queue of unexpanded macros (most other macros are processed this way too), and then a glob delegation waits in that queue until its trait path is resolved, and enough code expands to generate the identifier list produced from the glob.
Glob delegation is only allowed in impls, and can only point to traits.
Supporting it in other places gives very little practical benefit, but significantly raises the implementation complexity.
Part of https://github.com/rust-lang/rust/issues/118212.
We already do this for a number of crates, e.g. `rustc_middle`,
`rustc_span`, `rustc_metadata`, `rustc_span`, `rustc_errors`.
For the ones we don't, in many cases the attributes are a mess.
- There is no consistency about order of attribute kinds (e.g.
`allow`/`deny`/`feature`).
- Within attribute kind groups (e.g. the `feature` attributes),
sometimes the order is alphabetical, and sometimes there is no
particular order.
- Sometimes the attributes of a particular kind aren't even grouped
all together, e.g. there might be a `feature`, then an `allow`, then
another `feature`.
This commit extends the existing sorting to all compiler crates,
increasing consistency. If any new attribute line is added there is now
only one place it can go -- no need for arbitrary decisions.
Exceptions:
- `rustc_log`, `rustc_next_trait_solver` and `rustc_type_ir_macros`,
because they have no crate attributes.
- `rustc_codegen_gcc`, because it's quasi-external to rustc (e.g. it's
ignored in `rustfmt.toml`).
Parse unsafe attributes
Initial parse implementation for #123757
This is the initial work to parse unsafe attributes, which is represented as an extra `unsafety` field in `MetaItem` and `AttrItem`. There's two areas in the code where it appears that parsing is done manually and not using the parser stuff, and I'm not sure how I'm supposed to thread the change there.
Revert: create const block bodies in typeck via query feeding
as per the discussion in https://github.com/rust-lang/rust/pull/125806#discussion_r1622563948
It was a mistake to try to shoehorn const blocks and some specific anon consts into the same box and feed them during typeck. It turned out not simplifying anything (my hope was that we could feed `type_of` to start avoiding the huge HIR matcher, but that didn't work out), but instead making a few things more fragile.
reverts the const-block-specific parts of https://github.com/rust-lang/rust/pull/124650
`@bors` rollup=never had a small perf impact previously
fixes https://github.com/rust-lang/rust/issues/125846
r? `@compiler-errors`
It's small and has a single call site.
Also change the second `parse_meta` call to use a simple `match`, like
the first `parse_meta` call, instead of a confusing `map_err`+`ok`
combination.
Currently we have an awkward mix of fallible and infallible functions:
```
new_parser_from_source_str
maybe_new_parser_from_source_str
new_parser_from_file
(maybe_new_parser_from_file) // missing
(new_parser_from_source_file) // missing
maybe_new_parser_from_source_file
source_str_to_stream
maybe_source_file_to_stream
```
We could add the two missing functions, but instead this commit removes
of all the infallible ones and renames the fallible ones leaving us with
these which are all fallible:
```
new_parser_from_source_str
new_parser_from_file
new_parser_from_source_file
source_str_to_stream
source_file_to_stream
```
This requires making `unwrap_or_emit_fatal` public so callers of
formerly infallible functions can still work.
This does make some of the call sites slightly more verbose, but I think
it's worth it for the simpler API. Also, there are two `catch_unwind`
calls and one `catch_fatal_errors` call in this diff that become
removable thanks this change. (I will do that in a follow-up PR.)
The first one is out-of-date -- there are no longer functions expr,
item, stmt. And I don't know what a "HOF" is.
The second one doesn't really tell you anything.
- Convert it from a macro to a function, which is nicer.
- Rename it as `unwrap_or_emit_fatal`, which is clearer.
- Fix the comment. In particular, `panictry!` no longer exists.
- Remove the unnecessary `use` declaration.
It has a single call site.
This also means `CFG_ATTR_{GRAMMAR_HELP,NOTE_REF}` can be moved into
`parse_cfg_attr`, now that it's the only function that uses them.
And the commit removes the line break in the URL.
Lexing converts source text into a token stream. Parsing converts a
token stream into AST fragments. This commit renames several lexing
operations that have "parse" in the name. I think these names have been
subtly confusing me for years.
This is just a `s/parse/lex/` on function names, with one exception:
`parse_stream_from_source_str` becomes `source_str_to_stream`, to make
it consistent with the existing `source_file_to_stream`. The commit also
moves that function's location in the file to be just above
`source_file_to_stream`.
The commit also cleans up a few comments along the way.
Inside #123865, we are adding support for the new semantics
for expr2024, but we have noted a performance issue.
We realized there is a redundant check for each
token regarding an edition. This commit moves the edition
check to the end, avoiding some extra checks that
can slow down compilation time.
Link: https://github.com/rust-lang/rust/pull/123865
Co-Developed-by: @eholk
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Reject `CVarArgs` in `parse_ty_for_where_clause`
Fixes#125847. This regressed in #77035 where the `parse_ty` inside `parse_ty_where_predicate` was replaced with the at the time new `parse_ty_for_where_clause` which incorrectly stated it would permit CVarArgs (maybe a copy/paste error).
r? parser
Rename HIR `TypeBinding` to `AssocItemConstraint` and related cleanup
Rename `hir::TypeBinding` and `ast::AssocConstraint` to `AssocItemConstraint` and update all items and locals using the old terminology.
Motivation: The terminology *type binding* is extremely outdated. "Type bindings" not only include constraints on associated *types* but also on associated *constants* (feature `associated_const_equality`) and on RPITITs of associated *functions* (feature `return_type_notation`). Hence the word *item* in the new name. Furthermore, the word *binding* commonly refers to a mapping from a binder/identifier to a "value" for some definition of "value". Its use in "type binding" made sense when equality constraints (e.g., `AssocTy = Ty`) were the only kind of associated item constraint. Nowadays however, we also have *associated type bounds* (e.g., `AssocTy: Bound`) for which the term *binding* doesn't make sense.
---
Old terminology (HIR, rustdoc):
```
`TypeBinding`: (associated) type binding
├── `Constraint`: associated type bound
└── `Equality`: (associated) equality constraint (?)
├── `Ty`: (associated) type binding
└── `Const`: associated const equality (constraint)
```
Old terminology (AST, abbrev.):
```
`AssocConstraint`
├── `Bound`
└── `Equality`
├── `Ty`
└── `Const`
```
New terminology (AST, HIR, rustdoc):
```
`AssocItemConstraint`: associated item constraint
├── `Bound`: associated type bound
└── `Equality`: associated item equality constraint OR associated item binding (for short)
├── `Ty`: associated type equality constraint OR associated type binding (for short)
└── `Const`: associated const equality constraint OR associated const binding (for short)
```
r? compiler-errors
Disallow cast with trailing braced macro in let-else
This fixes an edge case I noticed while porting #118880 and #119062 to syn.
Previously, rustc incorrectly accepted code such as:
```rust
let foo = &std::ptr::null as &'static dyn std::ops::Fn() -> *const primitive! {
8
} else {
return;
};
```
even though a right curl brace `}` directly before `else` in a `let...else` statement is not supposed to be valid syntax.
Translation of the lint message happens when the actual diagnostic is
created, not when the lint is buffered. Generating the message from
BuiltinLintDiag ensures that all required data to construct the message
is preserved in the LintBuffer, eventually allowing the messages to be
moved to fluent.
Remove the `msg` field from BufferedEarlyLint, it is either generated
from the data in the BuiltinLintDiag or stored inside
BuiltinLintDiag::Normal.
Rename Unsafe to Safety
Alternative to #124455, which is to just have one Safety enum to use everywhere, this opens the posibility of adding `ast::Safety::Safe` that's useful for unsafe extern blocks.
This leaves us today with:
```rust
enum ast::Safety {
Unsafe(Span),
Default,
// Safe (going to be added for unsafe extern blocks)
}
enum hir::Safety {
Unsafe,
Safe,
}
```
We would convert from `ast::Safety::Default` into the right Safety level according the context.
Improve parser
Fixes#124935.
- Add a few more help diagnostics to incorrect semicolons
- Overall improved that function
- Addded a few comments
- Renamed diff_marker fns to git_diff_marker
Update `expr` matcher for Edition 2024 and add `expr_2021` nonterminal
This commit adds a new nonterminal `expr_2021` in macro patterns, and `expr_fragment_specifier_2024` feature flag.
This change also updates `expr` so that on Edition 2024 it will also match `const { ... }` blocks, while `expr_2021` preserves the current behavior of `expr`, matching expressions without `const` blocks.
Joint work with `@vincenzopalazzo.`
Issue #123742
The extra span is now recorded in the new `TokenKind::NtIdent` and
`TokenKind::NtLifetime`. These both consist of a single token, and so
there's no operator precedence problems with inserting them directly
into the token stream.
The other way to do this would be to wrap the ident/lifetime in invisible
delimiters, but there's a lot of code that assumes an interpolated
ident/lifetime fits in a single token, and changing all that code to work with
invisible delimiters would have been a pain. (Maybe it could be done in a
follow-up.)
This change might not seem like much of a win, but it's a first step toward the
much bigger and long-desired removal of `Nonterminal` and
`TokenKind::Interpolated`. That change is big and complex enough that it's
worth doing this piece separately. (Indeed, this commit is based on part of a
late commit in #114647, a prior attempt at that big and complex change.)
This commit adds a new nonterminal `expr_2021` in macro patterns, and
`expr_fragment_specifier_2024` feature flag. For now, `expr` and
`expr_2021` are treated the same, but in future PRs we will update
`expr` to match to new grammar.
Co-authored-by: Vincezo Palazzo <vincenzopalazzodev@gmail.com>
This span records the declaration of the metavariable in the LHS of the macro.
It's used in a couple of error messages. Unfortunately, it gets in the way of
the long-term goal of removing `TokenKind::Interpolated`. So this commit
removes it, which degrades a couple of (obscure) error messages but makes
things simpler and enables the next commit.
It is impossible for expr here to be a braced macro call. Expr comes
from `parse_stmt_without_recovery`, in which macro calls are parsed by
`parse_stmt_mac`. See this part:
let kind = if (style == MacStmtStyle::Braces
&& self.token != token::Dot
&& self.token != token::Question)
|| self.token == token::Semi
|| self.token == token::Eof
{
StmtKind::MacCall(P(MacCallStmt { mac, style, attrs, tokens: None }))
} else {
// Since none of the above applied, this is an expression statement macro.
let e = self.mk_expr(lo.to(hi), ExprKind::MacCall(mac));
let e = self.maybe_recover_from_bad_qpath(e)?;
let e = self.parse_expr_dot_or_call_with(e, lo, attrs)?;
let e = self.parse_expr_assoc_with(
0,
LhsExpr::AlreadyParsed { expr: e, starts_statement: false },
)?;
StmtKind::Expr(e)
};
A braced macro call at the head of a statement is always either extended
into ExprKind::Field / MethodCall / Await / Try / Binary, or else
returned as StmtKind::MacCall. We can never get a StmtKind::Expr
containing ExprKind::MacCall containing brace delimiter.
The change to the test is a little goofy because the compiler was
guessing "correctly" before that `falsy! {}` is the condition as opposed
to the else body. But I believe this change is fundamentally correct.
Braced macro invocations in statement position are most often item-like
(`thread_local! {...}`) as opposed to parenthesized macro invocations
which are condition-like (`cfg!(...)`).
This commit by itself is supposed to have no effect on behavior. All of
the call sites are updated to preserve their previous behavior.
The behavior changes are in the commits that follow.
For each of these, we need to decide whether they need to be using
`expr_requires_semi_to_be_stmt`, or `expr_requires_comma_to_be_match_arm`,
which are supposed to be 2 different behaviors. Previously they were
conflated into one, causing either too much or too little
parenthesization.
Make sure we consume a generic arg when checking mistyped turbofish
When recovering un-turbofish-ed args in expr position (e.g. `let x = a<T, U>();` in `check_mistyped_turbofish_with_multiple_type_params`, we used `parse_seq_to_before_end` to parse the fake generic args; however, it used `parse_generic_arg` which *optionally* parses a generic arg. If it doesn't end up parsing an arg, it returns `Ok(None)` and consumes no tokens. If we don't find a delimiter after this (`,`), we try parsing *another* element. In this case, we just infinitely loop looking for a subsequent element.
We can fix this by making sure that we either parse a generic arg or error in `parse_seq_to_before_end`'s callback.
Fixes#124897
ignore generics args in attribute paths
Fixes#97006Fixes#123911Fixes#123912
This patch ensures that we no longer have to handle invalid generic arguments in attribute paths.
r? `@petrochenkov`
Fix parse error message for meta items
Addresses https://github.com/rust-lang/rust/issues/122796#issuecomment-2010803906, cc [``@]Thomasdezeeuw.``
For attrs inside of a macro like `#[doc(alias = $ident)]` or `#[cfg(feature = $ident)]` where `$ident` is a macro metavariable of fragment kind `ident`, we used to say the following when expanded (with `$ident` ⟼ `ident`):
```
error: expected unsuffixed literal or identifier, found `ident`
--> weird.rs:6:19
|
6 | #[cfg(feature = $ident)]
| ^^^^^^
...
11 | m!(id);
| ------ in this macro invocation
|
= note: this error originates in the macro `m` (in Nightly builds, run with -Z macro-backtrace for more info)
```
This was incorrect and caused confusion, justifiably so (see #122796).
In this position, we only accept/expect *unsuffixed literals* which consist of numeric & string literals as well as the boolean literals / the keywords / the reserved identifiers `false` & `true` **but not** arbitrary identifiers.
Furthermore, we used to suggest garbage when encountering unexpected non-identifier tokens:
```
error: expected unsuffixed literal, found `-`
--> weird.rs:16:17
|
16 | #[cfg(feature = -1)]
| ^
|
help: surround the identifier with quotation marks to parse it as a string
|
16 | #[cfg(feature =" "-1)]
| + +
```
Now we no longer do.
The starting point for this was identical comments on two different
fields, in `ast::VariantData::Struct` and `hir::VariantData::Struct`:
```
// FIXME: investigate making this a `Option<ErrorGuaranteed>`
recovered: bool
```
I tried that, and then found that I needed to add an `ErrorGuaranteed`
to `Recovered::Yes`. Then I ended up using `Recovered` instead of
`Option<ErrorGuaranteed>` for these two places and elsewhere, which
required moving `ErrorGuaranteed` from `rustc_parse` to `rustc_ast`.
This makes things more consistent, because `Recovered` is used in more
places, and there are fewer uses of `bool` and
`Option<ErrorGuaranteed>`. And safer, because it's difficult/impossible
to set `recovered` to `Recovered::Yes` without having emitted an error.
Remove braces when fixing a nested use tree into a single item
[Back in 2019](https://github.com/rust-lang/rust/pull/56645) I added rustfix support for the `unused_imports` lint, to automatically remove them when running `cargo fix`. For the most part this worked great, but when removing all but one childs of a nested use tree it turned `use foo::{Unused, Used}` into `use foo::{Used}`. This is slightly annoying, because it then requires you to run `rustfmt` to get `use foo::Used`.
This PR automatically removes braces and the surrouding whitespace when all but one child of a nested use tree are unused. To get it done I had to add the span of the nested use tree to the AST, and refactor a bit the code I wrote back then.
A thing I noticed is, there doesn't seem to be any `//@ run-rustfix` test for fixing the `unused_imports` lint. I created a test in `tests/suggestions` (is that the right directory?) that for now tests just what I added in the PR. I can followup in a separate PR to add more tests for fixing `unused_lints`.
This PR is best reviewed commit-by-commit.
Improve `rustc_parse::Parser`'s debuggability
The main event is the final commit where I add `Parser::debug_lookahead`. Everything else was basically cleaning up things that bugged me (debugging, as it were) until I felt comfortable enough to actually work on it.
The motivation is that it's annoying as hell to try to figure out how the debug infra works in rustc without having basic queries like `debug!(?parser);` come up "empty". However, Parser has a lot of fields that are mostly irrelevant for most debugging, like the entire ParseSess. I think `Parser::debug_lookahead` with a capped lookahead might be fine as a general-purpose Debug impl, but this adapter version was suggested to allow more choice, and admittedly, it's a refined version of what I was already handrolling just to get some insight going.
I tried debugging a parser-related issue but found it annoying to not be
able to easily peek into the Parser's token stream.
Add a convenience fn that offers an opinionated view into the parser,
but one that is useful for answering basic questions about parser state.
There are some test cases involving `parse` and `tokenstream` and
`mut_visit` that are located in `rustc_expand`. Because it used to be
the case that constructing a `ParseSess` required the involvement of
`rustc_expand`. However, since #64197 merged (a long time ago)
`rust_expand` no longer needs to be involved.
This commit moves the tests into `rustc_parse`. This is the optimal
place for the `parse` tests. It's not ideal for the `tokenstream` and
`mut_visit` tests -- they would be better in `rustc_ast` -- but they
still rely on parsing, which is not available in `rustc_ast`. But
`rustc_parse` is lower down in the crate graph and closer to `rustc_ast`
than `rust_expand`, so it's still an improvement for them.
The exact renaming is as follows:
- rustc_expand/src/mut_visit/tests.rs -> rustc_parse/src/parser/mut_visit/tests.rs
- rustc_expand/src/tokenstream/tests.rs -> rustc_parse/src/parser/tokenstream/tests.rs
- rustc_expand/src/tests.rs + rustc_expand/src/parse/tests.rs ->
compiler/rustc_parse/src/parser/tests.rs
The latter two test files are combined because there's no need for them
to be separate, and having a `rustc_parse::parser::parse` module would
be weird. This also means some `pub(crate)`s can be removed.
Stabilise inline_const
# Stabilisation Report
## Summary
This PR will stabilise `inline_const` feature in expression position. `inline_const_pat` is still unstable and will *not* be stabilised.
The feature will allow code like this:
```rust
foo(const { 1 + 1 })
```
which is roughly desugared into
```rust
struct Foo;
impl Foo {
const FOO: i32 = 1 + 1;
}
foo(Foo::FOO)
```
This feature is from https://github.com/rust-lang/rfcs/pull/2920 and is tracked in #76001 (the tracking issue should *not* be closed as it needs to track inline const in pattern position). The initial implementation is done in #77124.
## Difference from RFC
There are two major differences (enhancements) as implemented from the RFC. First thing is that the RFC says that the type of an inline const block inferred from the content *within* it, but we currently can infer the type using the information from outside the const block as well. This is a frequently requested feature to the initial implementation (e.g. #89964). The inference is implemented in #89561 and is done by treating inline const similar to a closure and therefore share inference context with its parent body.
This allows code like:
```rust
let v: Vec<i32> = const { Vec::new() };
```
Another enhancement that differs from the RFC is that we currently allow inline consts to reference generic parameters. This is implemented in #96557.
This allows code like:
```rust
fn create_none_array<T, const N: usize>() -> [Option<T>; N] {
[const { None::<T> }; N]
}
```
This enhancement also makes inline const usable as static asserts:
```rust
fn require_zst<T>() {
const { assert!(std::mem::size_of::<T>() == 0) }
}
```
## Documentation
Reference: rust-lang/reference#1295
## Unresolved issues
We still have a few issues that are not resolved, but I don't think it necessarily has to block stabilisation:
* expr fragment specifier issue: #86730
* ~~`const {}` behaves similar to `async {}` but not to `{}` and `unsafe {}` (they are treated as `ExpressionWithoutBlock` rather than `ExpressionWithBlock`): https://rust-lang.zulipchat.com/#narrow/stream/213817-t-lang/topic/const.20blocks.20differ.20from.20normal.20and.20from.20unsafe.20blocks/near/290229453~~
## Tests
There are a few tests in https://github.com/rust-lang/rust/tree/master/src/test/ui/inline-const
delegation: Support renaming, and async, const, extern "ABI" and C-variadic functions
Also allow delegating to functions with opaque types (`impl Trait`).
The delegation item will refer to the original opaque type from the callee, fresh opaque type won't be created, which seems like a reasonable behavior.
(Such delegation items will cause query cycles when used in trait impls, but it can be fixed later.)
Part of https://github.com/rust-lang/rust/issues/118212.
Rollup of 3 pull requests
Successful merges:
- #124003 (Dellvmize some intrinsics (use `u32` instead of `Self` in some integer intrinsics))
- #124169 (Don't fatal when calling `expect_one_of` when recovering arg in `parse_seq`)
- #124286 (Subtree sync for rustc_codegen_cranelift)
r? `@ghost`
`@rustbot` modify labels: rollup
Don't fatal when calling `expect_one_of` when recovering arg in `parse_seq`
In `parse_seq`, when parsing a sequence of token-separated items, if we don't see a separator, we try to parse another item eagerly in order to give a good diagnostic and recover from a missing separator:
d1a0fa5ed3/compiler/rustc_parse/src/parser/mod.rs (L900-L901)
If parsing the item itself calls `expect_one_of`, then we will fatal because of #58903:
d1a0fa5ed3/compiler/rustc_parse/src/parser/mod.rs (L513-L516)
For `precise_capturing` feature I implemented, we do end up calling `expected_one_of`:
d1a0fa5ed3/compiler/rustc_parse/src/parser/ty.rs (L712-L714)
This leads the compiler to fatal *before* having emitted the first error, leading to absolutely no useful information for the user about what happened in the parser.
This PR makes it so that we stop doing that.
Fixes#124195
Disallow ambiguous attributes on expressions
This implements the suggestion in [#15701](https://github.com/rust-lang/rust/issues/15701#issuecomment-2033124217) to disallow ambiguous outer attributes on expressions. This should resolve one of the concerns blocking the stabilization of `stmt_expr_attributes`.
The current message for "`->` used for field access" is the following:
```rust
error: expected one of `!`, `.`, `::`, `;`, `?`, `{`, `}`, or an operator, found `->`
--> src/main.rs:2:6
|
2 | a->b;
| ^^ expected one of 8 possible tokens
```
(playground link[1])
This PR tries to address this by adding a dedicated error message and recovery. The proposed error message is:
```
error: `->` used for field access or method call
--> ./tiny_test.rs:2:6
|
2 | a->b;
| ^^ help: try using `.` instead
|
= help: the `.` operator will dereference the value if needed
```
(feel free to bikeshed it as much as necessary)
[1]: https://play.rust-lang.org/?version=stable&mode=debug&edition=2021&gist=7f8b6f4433aa7866124123575456f54e
Signed-off-by: Sasha Pourcelot <sasha.pourcelot@protonmail.com>
Properly handle emojis as literal prefix in macros
Do not accept the following
```rust
macro_rules! lexes {($($_:tt)*) => {}}
lexes!(🐛"foo");
```
Before, invalid emoji identifiers were gated during parsing instead of lexing in all cases, but this didn't account for macro pre-expansion of literal prefixes.
Fix#123696.
Implement syntax for `impl Trait` to specify its captures explicitly (`feature(precise_capturing)`)
Implements `impl use<'a, 'b, T, U> Sized` syntax that allows users to explicitly list the captured parameters for an opaque, rather than inferring it from the opaque's bounds (or capturing *all* lifetimes under 2024-edition capture rules). This allows us to exclude some implicit captures, so this syntax may be used as a migration strategy for changes due to #117587.
We represent this list of captured params as `PreciseCapturingArg` in AST and HIR, resolving them between `rustc_resolve` and `resolve_bound_vars`. Later on, we validate that the opaques only capture the parameters in this list.
We artificially limit the feature to *require* mentioning all type and const parameters, since we don't currently have support for non-lifetime bivariant generics. This can be relaxed in the future.
We also may need to limit this to require naming *all* lifetime parameters for RPITIT, since GATs have no variance. I have to investigate this. This can also be relaxed in the future.
r? `@oli-obk`
Tracking issue:
- https://github.com/rust-lang/rust/issues/123432
Cleanup: Rename `ModSep` to `PathSep`
`::` is usually referred to as the *path separator* (citation needed).
The existing name `ModSep` for *module separator* is a bit misleading since it in fact separates the segments of arbitrary path segments, not only ones resolving to modules. Let me just give a shout-out to associated items (`T::Assoc`, `<Ty as Trait>::function`) and enum variants (`Option::None`).
Motivation: Reduce friction for new contributors, prevent potential confusion.
cc `@petrochenkov`
r? nnethercote or compiler
Fix invalid silencing of parsing error
Given
```rust
macro_rules! a {
( ) => {
impl<'b> c for d {
e::<f'g>
}
};
}
```
ensure an error is emitted.
Fix#123079.
Do not accept the following
```rust
macro_rules! lexes {($($_:tt)*) => {}}
lexes!(🐛"foo");
```
Before, invalid emoji identifiers were gated during parsing instead of lexing in all cases, but this didn't account for macro expansion of literal prefixes.
Fix#123696.
`lexer::UnmatchedDelim` struct in `rustc_parse` is unnecessary public
outside of the crate. This commit reduces the visibility to
`pub(crate)`.
Beside, this removes unnecessary field `expected_delim` that causes
warnings after changing the visibility.
