`AddToDiagnostic::add_to_diagnostic_with` is similar to the previous
`AddToDiagnostic::add_to_diagnostic` but takes a function that can be
used by the caller to modify diagnostic messages originating from the
subdiagnostic (such as performing translation eagerly).
`add_to_diagnostic` now just calls `add_to_diagnostic_with` with an
empty closure.
Signed-off-by: David Wood <david.wood@huawei.com>
I refactored the code:
- Removed handling of methods, as it felt entirely unnecessary
- Removed clippy utils (obviously...)
- Used some shiny compiler features
(let-else is very handy for lints 👀)
- I also renamed the lint to `for_loop_over_fallibles` (note: no `s`).
I'm not sure what's the naming convention here, so maybe I'm wrong.
Remove `-Ztime`
Because it has a lot of overlap with `-Ztime-passes` but is generally less useful. Plus some related cleanups.
Best reviewed one commit at a time.
r? `@davidtwco`
The compiler currently has `-Ztime` and `-Ztime-passes`. I've used
`-Ztime-passes` for years but only recently learned about `-Ztime`.
What's the difference? Let's look at the `-Zhelp` output:
```
-Z time=val -- measure time of rustc processes (default: no)
-Z time-passes=val -- measure time of each rustc pass (default: no)
```
The `-Ztime-passes` description is clear, but the `-Ztime` one is less so.
Sounds like it measures the time for the entire process?
No. The real difference is that `-Ztime-passes` prints out info about passes,
and `-Ztime` does the same, but only for a subset of those passes. More
specifically, there is a distinction in the profiling code between a "verbose
generic activity" and an "extra verbose generic activity". `-Ztime-passes`
prints both kinds, while `-Ztime` only prints the first one. (It took me
a close reading of the source code to determine this difference.)
In practice this distinction has low value. Perhaps in the past the "extra
verbose" output was more voluminous, but now that we only print stats for a
pass if it exceeds 5ms or alters the RSS, `-Ztime-passes` is less spammy. Also,
a lot of the "extra verbose" cases are for individual lint passes, and you need
to also use `-Zno-interleave-lints` to see those anyway.
Therefore, this commit removes `-Ztime` and the associated machinery. One thing
to note is that the existing "extra verbose" activities all have an extra
string argument, so the commit adds the ability to accept an extra argument to
the "verbose" activities.
Lint against nested opaque types that don't satisfy associated type bounds
See the test failures for examples of places where this lint would fire.
r? `@oli-obk`
Move lint level source explanation to the bottom
So, uhhhhh
r? `@estebank`
## User-facing change
"note: `#[warn(...)]` on by default" and such are moved to the bottom of the diagnostic:
```diff
- = note: `#[warn(unsupported_calling_conventions)]` on by default
= warning: this was previously accepted by the compiler but is being phased out; it will become a hard error in a future release!
= note: for more information, see issue #87678 <https://github.com/rust-lang/rust/issues/87678>
+ = note: `#[warn(unsupported_calling_conventions)]` on by default
```
Why warning is enabled is the least important thing, so it shouldn't be the first note the user reads, IMO.
## Developer-facing change
`struct_span_lint` and similar methods have a different signature.
Before: `..., impl for<'a> FnOnce(LintDiagnosticBuilder<'a, ()>)`
After: `..., impl Into<DiagnosticMessage>, impl for<'a, 'b> FnOnce(&'b mut DiagnosticBuilder<'a, ()>) -> &'b mut DiagnosticBuilder<'a, ()>`
The reason for this is that `struct_span_lint` needs to edit the diagnostic _after_ `decorate` closure is called. This also makes lint code a little bit nicer in my opinion.
Another option is to use `impl for<'a> FnOnce(LintDiagnosticBuilder<'a, ()>) -> DiagnosticBuilder<'a, ()>` altough I don't _really_ see reasons to do `let lint = lint.build(message)` everywhere.
## Subtle problem
By moving the message outside of the closure (that may not be called if the lint is disabled) `format!(...)` is executed earlier, possibly formatting `Ty` which may call a query that trims paths that crashes the compiler if there were no warnings...
I don't think it's that big of a deal, considering that we move from `format!(...)` to `fluent` (which is lazy by-default) anyway, however this required adding a workaround which is unfortunate.
## P.S.
I'm sorry, I do not how to make this PR smaller/easier to review. Changes to the lint API affect SO MUCH 😢
`Res::SelfTy` currently has two `Option`s. When the second one is `Some`
the first one is never consulted. So we can split it into two variants,
`Res::SelfTyParam` and `Res::SelfTyAlias`, reducing the size of `Res`
from 24 bytes to 12. This then shrinks `hir::Path` and
`hir::PathSegment`, which are the HIR types that take up the most space.
fix a ui test
use `into`
fix clippy ui test
fix a run-make-fulldeps test
implement `IntoQueryParam<DefId>` for `OwnerId`
use `OwnerId` for more queries
change the type of `ParentOwnerIterator::Item` to `(OwnerId, OwnerNode)`
FIX - ambiguous Diagnostic link in docs
UPDATE - rename diagnostic_items to IntoDiagnostic and AddToDiagnostic
[Gardening] FIX - formatting via `x fmt`
FIX - rebase conflicts. NOTE: Confirm wheather or not we want to handle TargetDataLayoutErrorsWrapper this way
DELETE - unneeded allow attributes in Handler method
FIX - broken test
FIX - Rebase conflict
UPDATE - rename residual _SessionDiagnostic and fix LintDiag link
On later stages, the feature is already stable.
Result of running:
rg -l "feature.let_else" compiler/ src/librustdoc/ library/ | xargs sed -s -i "s#\\[feature.let_else#\\[cfg_attr\\(bootstrap, feature\\(let_else\\)#"
Compute lint levels by definition
Lint levels are currently computed once for the whole crate. Any code that wants to emit a lint depends on this single `lint_levels(())` query. This query contains the `Span` for each attribute that participates in the lint level tree, so any code that wants to emit a lint basically depends on the spans in all files in the crate.
Contrary to hard errors, we do not clear the incremental session on lints, so this implicit world dependency pessimizes incremental reuse. (And is furthermore invisible for allowed lints.)
This PR completes https://github.com/rust-lang/rust/pull/99634 (thanks for the initial work `@fee1-dead)` and includes it in the dependency graph.
The design is based on 2 queries:
1. `lint_levels_on(HirId) -> FxHashMap<LintId, LevelAndSource>` which accesses the attributes at the given `HirId` and processes them into lint levels. The `TyCtxt` is responsible for probing the HIR tree to find the user-visible level.
2. `lint_expectations(())` which lists all the `#[expect]` attributes in the crate.
This PR also introduces the ability to reconstruct a `HirId` from a `DepNode` by encoding the local part of the `DefPathHash` and the `ItemLocalId` in the two `u64` of the fingerprint. This allows for the dep-graph to directly recompute `lint_levels_on` directly, without having to force the calling query.
Closes https://github.com/rust-lang/rust/issues/95094.
Supersedes https://github.com/rust-lang/rust/pull/99634.
Initial implementation of dyn*
This PR adds extremely basic and incomplete support for [dyn*](https://smallcultfollowing.com/babysteps//blog/2022/03/29/dyn-can-we-make-dyn-sized/). The goal is to get something in tree behind a flag to make collaboration easier, and also to make sure the implementation so far is not unreasonable. This PR does quite a few things:
* Introduce `dyn_star` feature flag
* Adds parsing for `dyn* Trait` types
* Defines `dyn* Trait` as a sized type
* Adds support for explicit casts, like `42usize as dyn* Debug`
* Including const evaluation of such casts
* Adds codegen for drop glue so things are cleaned up properly when a `dyn* Trait` object goes out of scope
* Adds codegen for method calls, at least for methods that take `&self`
Quite a bit is still missing, but this gives us a starting point. Note that this is never intended to become stable surface syntax for Rust, but rather `dyn*` is planned to be used as an implementation detail for async functions in dyn traits.
Joint work with `@nikomatsakis` and `@compiler-errors.`
r? `@bjorn3`
Avoid `Iterator::last`
Adapters like `Filter` and `Map` use the default implementation of `Iterator::last` which is not short-circuiting (and so does `core::str::Split`). The predicate function will be run for every single item of the underlying iterator. I hope that removing those calls to `last` results in slight performance improvements.
The `visit_path_segment` method of both the AST and HIR visitors has a
`path_span` argument that isn't necessary. This commit removes it.
There are two very small and inconsequential functional changes.
- One call to `NodeCollector::insert` now is passed a path segment
identifier span instead of a full path span. This span is only used in
a panic message printed in the case of an internal compiler bug.
- Likewise, one call to `LifetimeCollectVisitor::record_elided_anchor`
now uses a path segment identifier span instead of a full path span.
This span is used to make some `'_` lifetimes.
Allow lint passes to be bound by `TyCtxt`
This will allow storing things like `Ty<'tcx>` inside late lint passes. It's already possible to store various id types so they're already implicitly bound to a specific `TyCtxt`.
r? rust-lang/compiler
Update `SessionDiagnostic::into_diagnostic` to take `Handler` instead of `ParseSess`
Suggested by the team in [this Zulip Topic](https://rust-lang.zulipchat.com/#narrow/stream/336883-i18n/topic/.23100717.20SessionDiagnostic.20on.20Handler).
`Handler` already has almost all the capabilities of `ParseSess` when it comes to diagnostic emission, in this migration we only needed to add the ability to access `source_map` from the emitter in order to get a `Snippet` and the `start_point`. Not sure if adding these two methods [`span_to_snippet_from_emitter` and `span_start_point_from_emitter`] is the best way to address this gap.
P.S. If this goes in the right direction, then we probably may want to move `SessionDiagnostic` to `rustc_errors` and rename it to `DiagnosticHandler` or something similar.
r? `@davidtwco`
r? `@compiler-errors`
`BindingAnnotation` refactor
* `ast::BindingMode` is deleted and replaced with `hir::BindingAnnotation` (which is moved to `ast`)
* `BindingAnnotation` is changed from an enum to a tuple struct e.g. `BindingAnnotation(ByRef::No, Mutability::Mut)`
* Associated constants added for convenience `BindingAnnotation::{NONE, REF, MUT, REF_MUT}`
One goal is to make it more clear that `BindingAnnotation` merely represents syntax `ref mut` and not the actual binding mode. This was especially confusing since we had `ast::BindingMode`->`hir::BindingAnnotation`->`thir::BindingMode`.
I wish there were more symmetry between `ByRef` and `Mutability` (variant) naming (maybe `Mutable::Yes`?), and I also don't love how long the name `BindingAnnotation` is, but this seems like the best compromise. Ideas welcome.
Suggested by the team in this Zulip Topic https://rust-lang.zulipchat.com/#narrow/stream/336883-i18n/topic/.23100717.20SessionDiagnostic.20on.20Handler
Handler already has almost all the capabilities of ParseSess when it comes to diagnostic emission, in this migration we only needed to add the ability to access source_map from the emitter in order to get a Snippet and the start_point. Not sure if this is the best way to address this gap
Add warning against unexpected --cfg with --check-cfg
This PR adds a warning when an unexpected `--cfg` is specified but not in the specified list of `--check-cfg`.
This is the follow-up PR I mentioned in https://github.com/rust-lang/rust/pull/99519.
r? `@petrochenkov`
Uplift the `let_underscore` lints from clippy into rustc.
This PR resolves#97241.
This PR adds three lints from clippy--`let_underscore_drop`, `let_underscore_lock`, and `let_underscore_must_use`, which are meant to capture likely-incorrect uses of `let _ = ...` bindings (in particular, doing this on a type with a non-trivial `Drop` causes the `Drop` to occur immediately, instead of at the end of the scope. For a type like `MutexGuard`, this effectively releases the lock immediately, which is almost certainly the wrong behavior)
In porting the lints from clippy I had to copy over a bunch of utility functions from `clippy_util` that these lints also relied upon. Is that the right approach?
Note that I've set the `must_use` and `drop` lints to Allow by default and set `lock` to Deny by default (this matches the same settings that clippy has). In talking with `@estebank` he informed me to do a Crater run (I am not sure what type of Crater run to request here--I think it's just "check only"?)
On the linked issue, there's some discussion about using `must_use` and `Drop` together as a heuristic for when to warn--I did not implement this yet.
r? `@estebank`
Add `special_module_name` lint
Declaring `lib` as a module is one of the most common beginner mistakes when trying to setup a binary and library target in the same crate. `special_module_name` lints against it, as well as `mod main;`
```
warning: found module declaration for main.rs
--> $DIR/special_module_name.rs:4:1
|
LL | mod main;
| ^^^^^^^^^
|
= note: a binary crate cannot be used as library
warning: found module declaration for lib.rs
--> $DIR/special_module_name.rs:1:1
|
LL | mod lib;
| ^^^^^^^^
|
= note: `#[warn(special_module_name)]` on by default
= note: lib.rs is the root of this crate's library target
= help: to refer to it from other targets, use the library's name as the path
```
Note that the help message is not the best in that it doesn't provide an example of an import path (`the_actual_crate_name::`), and doesn't check whether the current file is part of a library/binary target to provide more specific error messages. I'm not sure where this lint would have to be run to access that information.
Fix a bunch of typo
This PR will fix some typos detected by [typos].
I only picked the ones I was sure were spelling errors to fix, mostly in
the comments.
[typos]: https://github.com/crate-ci/typos
Functions annotated with `#[rustc_lint_diagnostics]` are used by the
diagnostic migration lints to know when to lint, but functions that are
annotated with this attribute shouldn't themselves be linted.
Signed-off-by: David Wood <david.wood@huawei.com>
This PR will fix some typos detected by [typos].
I only picked the ones I was sure were spelling errors to fix, mostly in
the comments.
[typos]: https://github.com/crate-ci/typos
Strengthen invalid_value lint to forbid uninit primitives, adjust docs to say that's UB
For context: https://github.com/rust-lang/rust/issues/66151#issuecomment-1174477404=
This does not make it a FCW, but it does explicitly state in the docs that uninit integers are UB.
This also doesn't affect any runtime behavior, uninit u32's will still successfully be created through mem::uninitialized.
Revert let_chains stabilization
This is the revert against master, the beta revert was already done in #100538.
Bumps the stage0 compiler which already has it reverted.
Rollup of 7 pull requests
Successful merges:
- #100898 (Do not report too many expr field candidates)
- #101056 (Add the syntax of references to their documentation summary.)
- #101106 (Rustdoc-Json: Retain Stripped Modules when they are imported, not when they have items)
- #101131 (CTFE: exposing pointers and calling extern fn is just impossible)
- #101141 (Simplify `get_trait_ref` fn used for `virtual_function_elimination`)
- #101146 (Various changes to logging of borrowck-related code)
- #101156 (Remove `Sync` requirement from lint pass objects)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Remove separate indexing of early-bound regions
~Based on https://github.com/rust-lang/rust/pull/99728.~
This PR copies some modifications from https://github.com/rust-lang/rust/pull/97839 around object lifetime defaults.
These modifications allow to stop counting generic parameters during lifetime resolution, and rely on the indexing given by `rustc_typeck::collect`.
sugg: take into count the debug formatting
Closes https://github.com/rust-lang/rust/issues/100648
This PR will fix a suggestion error by taking into consideration also the `:?` symbol and act in a different way
``@rustbot`` r? ``@compiler-errors``
N.B: I did not find a full way to test the change, any idea?
- Rename `ast::Lit::token` as `ast::Lit::token_lit`, because its type is
`token::Lit`, which is not a token. (This has been confusing me for a
long time.)
reasonable because we have an `ast::token::Lit` inside an `ast::Lit`.
- Rename `LitKind::{from,to}_lit_token` as
`LitKind::{from,to}_token_lit`, to match the above change and
`token::Lit`.
Visit attributes in more places.
This adds 3 loosely related changes (I can split PRs if desired):
- Attribute checking on pattern struct fields.
- Attribute checking on struct expression fields.
- Lint level visiting on pattern struct fields, struct expression fields, and generic parameters.
There are still some lints which ignore lint levels in various positions. This is a consequence of how the lints themselves are implemented. For example, lint levels on associated consts don't work with `unused_braces`.
This was incorrectly inserting the ExprField as a sibling of the struct
expression.
This required adjusting various parts which were looking at parent node
of a field expression to find the struct.
This helps simplify the code. It also fixes it to use the correct parent
when lowering. One consequence is the `non_snake_case` lint needed
to change the way it looked for parent nodes in a struct pattern.
This also includes a small fix to use the correct `Target` for
expression field attribute validation.
This extends the LintLevelBuilder to handle lint level attributes on
struct expression fields and pattern fields.
This also updates the early lints to honor lint levels on generic
parameters.
Currently, the let_underscore_lock lint simply tells what is wrong, but
not why it is wrong. We fix this by using a `MultiSpan` to explain
specifically that doing `let _ = ` immediately drops the lock guard
because it does not assign the lock guard to a binding.
Enable unused_parens for match arms
Fixes: https://github.com/rust-lang/rust/issues/92751
Currently I can't get the `stderr` to work with `./x.py test`, but this should fix the issue. Help would be appreciated!
For named arguments used as implicit position arguments, underline both
the opening curly brace and either:
* if there is formatting, the next character (which will either be the
closing curl brace or the `:` denoting the start of formatting args)
* if there is no formatting, the entire arg span (important if there is
whitespace like `{ }`)
This should make it more obvious where the named argument should be.
Additionally, in the lint message, emit the formatting argument names
without a dollar sign to avoid potentially confusion.
Fixes#99907
