update const generics feature gates
**tl;dr: split const generics into three features: `adt_const_params`, `const_generics_defaults` and `generic_const_exprs`**
continuing the work of `@BoxyUwU` in #88324, this PR
- renames `feature(const_evaluatable_checked)` to `feature(generic_const_exprs)` which now doesn't need any other feature gate to work. Previously `feature(const_evaluatable_checked)` was only useful in combination with `feature(const_generics)`.
- completely removes `feature(lazy_normalization_consts)`. This feature only supplied the parents generics to anonymous constants, which is pretty useless as generic anon consts are only allowed with `feature(generic_const_exprs)` anyways.
- moves the ability to use additional const param types from `feature(const_generics)` into `feature(adt_const_params)`. As `feature(const_generics)` is now mostly useless without `feature(generic_const_exprs)` we also remove that feature flag.
- updates tests, removing duplicates and unnecessary revisions in some cases and also deletes all unused `*.stderr` files.
I not also remove the ordering restriction for const and type parameters if any of the three const generics features is active.
This ordering restriction feels like the only "real" use of the current `feature(const_generics)` right now so this change isn't a perfect solution, but as I intend to stabilize the ordering - and `feature(const_generics_defaults)` - in the very near future, I think this is acceptable for now.
---
cc `@rust-lang/project-const-generics` about the new feature names and this change in general.
I don't think we need any external approval for this change but I do intend to publish an update to the const generics tracking issue the day this PR lands, so I don't want this merged yet.
Apologies to whoever ends up reviewing this PR 😅❤️
r? rust-lang/project-const-generics
`tcx.def_kind()` could theoretically invoke another query, which could
cause an infinite query loop. Accessing the HIR map directly makes that
less likely to happen.
I also changed it to use `as_local()` (`tcx.def_kind()` seems to
implicitly call `expect_local()`) and `opt_def_kind()` to reduce the
chance of panicking on valid code.
rustc_target: `TyAndLayout::field` should never error.
This refactor (making `TyAndLayout::field` return `TyAndLayout` without any `Result` around it) is based on a simple observation, regarding `TyAndLayout::field`:
If `cx.layout_of(ty)` succeeds (for some `cx` and `ty`), then `.field(cx, i)` on the resulting `TyAndLayout` should *always* succeed in computing `cx.layout_of(field_ty)` (where `field_ty` is the type of the `i`th field of `ty`).
The reason for this is that no matter which field is chosen, `cx.layout_of(field_ty)` *will have already been computed*, as part of computing `cx.layout_of(ty)`, as we cannot determine the layout of *any* type without considering the layouts of *all* of its fields.
And so it should be fine to turn any errors into ICEs, since they likely indicate a `cx` mismatch, or some other edge case that is due to a compiler bug (as opposed to ever being an user-facing error).
<hr/>
Each commit should probably be reviewed separately, though note that there's some `where` clauses (in `rustc_target::abi::call::*`) that change in most commits.
cc `@nagisa` `@oli-obk`
Handle match statements with non exhaustive variants in closures
This PR ensures that the behavior for match statements with non exhaustive variants is the same inside and outside closures.
If we have a non-exhaustive SingleVariant which is defined in a different crate, then we should handle the case the same way we would handle a MultiVariant: borrow the match discriminant.
Closes https://github.com/rust-lang/project-rfc-2229/issues/59
r? `@nikomatsakis`
Remove `Session.if_let_suggestions`
We can instead if either the LHS or RHS types contain
`TyKind::Error`. In addition to covering the case where
we would have previously updated `if_let_suggestions`, this might
also prevent redundant errors in other cases as well.
Suggestion for call on immutable binding of mutable type
When calling a method requiring a mutable self borrow on an inmutable
to a mutable borrow of the type, suggest making the binding mutable.
Fix#83241.
ast_lowering: Introduce `lower_span` for catching all spans entering HIR
This PR cherry-picks the `fn lower_span` change from https://github.com/rust-lang/rust/pull/84373.
I also introduced `fn lower_ident` for lowering spans in identifiers, and audited places where HIR structures with spans or identifiers are constructed and added a few missing `lower_span`s/`lower_ident`s.
Having a hook for spans entering HIR can be useful for things other than https://github.com/rust-lang/rust/pull/84373, e.g. https://github.com/rust-lang/rust/issues/35148.
I also want to check whether this change causes perf regressions due to some accidental inlining issues.
r? `@cjgillot`
Make `-Z gcc-ld=lld` work for Apple targets
`-Z gcc-ld=lld` was introduced in #85961. It does not work on Macos because lld needs be either named `ld64` or passed `-flavor darwin` as the first two arguments in order to select the Mach-O flavor. Rust invokes cc (=clang) on Macos for linking which calls `ld` as linker binary and not `ld64`, so just creating an `ld64` binary and modifying the search path with `-B` does not work.
In order to solve this patch does:
* Set the `lld_flavor` for all Apple-derived targets to `LldFlavor::Ld64`. As far as I can see this actually works towards fixing `-Xlinker=rust-lld` as all those targets use the Mach-O object format.
* Copy/hardlink rust-lld to the gcc-ld subdirectory as ld64 next to ld.
* If `-Z gcc-ld=lld` is used and the target lld flavor is Ld64 add `-fuse-ld=/path/to/ld64` to the linker invocation.
Fixes#86945.
Old error output:
3 | let _: usize = $f;
| ----- ^ expected `usize`, found struct `Baz`
| |
| expected due to this
New error output:
3 | let _: usize = $f;
| ----- ^^ expected `usize`, found struct `Baz`
| |
| expected due to this
Old error output:
= note: this warning originates in the macro `foo` (in Nightly builds, run with -Z macro-backtrace for more info)
help: wrap this expression in parentheses
|
4 | break '_l $f(;)
| ^ ^
New error output:
= note: this warning originates in the macro `foo` (in Nightly builds, run with -Z macro-backtrace for more info)
help: wrap this expression in parentheses
|
4 | break '_l ($f);
| ^ ^
Macros 2.0-ify rustc_arena
For the purpose of battle-testing macros 2.0 I'm looking to dogfood it in rustc, one crate at a time.
(Note that there are only 12 changed lines if you ignore whitespace.)
Before:
help: consider adding semicolon after the expression so its temporaries are dropped sooner, before the local variables declared by the block are dropped
|
LL | for x in DroppingSlice(&*v).iter(); {
| +
After:
help: consider adding semicolon after the expression so its temporaries are dropped sooner, before the local variables declared by the block are dropped
|
LL | };
| +
This seems like a reasonable fix: since the desugared "expr_drop_temps_mut"
contains the entire desugared loop construct, its span should contain the
entire loop construct as well.
Add missing const edge case
We don't "process" const so we need to check for additional cases when the PatKind is a Path. We need to make sure that if there is only one variant that there is no field. If there is one or more field, we will want to borrow the match scrutinee
Closes https://github.com/rust-lang/rust/issues/88331
r? `@nikomatsakis`
Treat macros as HIR items
Macros have historically been treated differently from other items at the HIR level. This PR makes them just like normal items. There are a few special cases left over, which I've attempted to lay out below. By normalizing the treatment of macro items, this PR simplifies a fair bit of code and fixes some bugs at the same time. For more information, see #87406.
r? `@cjgillot`
## Backwards incompatibility
This is backwards incompatible in one small way. Due to a mistake, it was previously possible to apply stability attributes to an exported macro, even without enabling the `staged_api` feature. This never should have worked. After this PR, it will error, as it should. We could make it a warning instead, but that would require a special case for a feature that shouldn't ever have worked and is likely used by no or very few crates, so I'm not thrilled about the idea.
## Notes for reviewers
### Commit seperation
I'd recommend reviewing this PR commit by commit. The commit chunking wasn't perfect, but it's better than looking at the combined diff, which is quite overwhelming. The compiler and standard library build after each commit, although tests do not necessarily pass and tools do not necessarily build till the end of the series.
### Special cases
There are a few special cases that remain after this change. Here are the notable ones I remember:
1. Visibility works a bit differently for `macro_rules!` macros than other items, since they aren't generally marked with `pub` but instead with `#[macro_export]`.
2. Since `#[macro_export]` macros always have paths at the top level of the crate, some additional handling needs to be done on the reexport to top level.
### Performance impact
I don't know for sure, but theses changes may slightly hurt performance. They create more work for the compiler in a few places. For instance, some operations that were previously run only for exported macros are now run for all macros. A perf run is probably advisable. For all I know we'll see performance improvements instead. :)
## Issues resolved
This resolves#87406 (the tracking issue for this change). It also fixes several bugs:
Fixes#59306.
Fixes#73754.
Fixes#87257.
S390x inline asm
This adds register definitions and constraint codes for the s390x general and floating point registers necessary for fixing #85931; as well as a few tests.
Further testing is needed, but I am a little unsure of what specific tests should be added to `src/test/assembly/asm/s390x.rs` to address this.
Previously, the result of `predicates_of` for a foreign trait
would depend on the *current* state of the corresponding source
file in the foreign crate. This could lead to ICEs during incremental
compilation, since the on-disk contents of the upstream source file
could potentially change without the upstream crate being recompiled.
Additionally, this ensure that that the metadata we produce for a crate
only depends on its *compiled* upstream dependencies (e.g an rlib or
rmeta file), *not* the current on-disk state of the upstream crate
source files.
We can instead if either the LHS or RHS types contain
`TyKind::Error`. In addition to covering the case where
we would have previously updated `if_let_suggestions`, this might
also prevent redundant errors in other cases as well.
Introduce `~const`
- [x] Removed `?const` and change uses of `?const`
- [x] Added `~const` to the AST. It is gated behind const_trait_impl.
- [x] Validate `~const` in ast_validation.
- [x] Update UI Tests
- [x] Add enum `BoundConstness` (With variants `NotConst` and
`ConstIfConst` allowing future extensions)
- [x] Adjust trait selection and pre-existing code to use `BoundConstness`.
- [ ] Optional steps for this PR
- [x] Fix#88155
- [x] ~~Do something with constness bounds in chalk~~ Must be done to rust-lang/chalk (just tried to refactor, there are a lot of errors to resolve :( )
- [ ] Adjust Error messages for `~const` bounds that can't be satisfied.
r? `@oli-obk`
Both the place where the parser encounters a needed closed delimiter and
the unclosed opening delimiter are important, so they should get the
same level of highlighting in the output.
Adjust linking order of static nobundle libraries
Link the static libraries with "-bundle" modifier from upstream rust crate right after linking this rust crate.
Some linker such as GNU linker `ld.bdf` treat order of linking as order of dependency.
After this change, static libraries with "-bundle" modifier is linked in the same order as "+bundle" modifier.
So we can change the value of "bundle" modifier without causing linking error.
fix: https://github.com/rust-lang/rust/issues/87541
r? `@petrochenkov`
`#[inline]` non-generic `pub fn`s in `rustc_target::abi` and `ty::layout`.
Mostly doing this as a perf curiosity, having spotted that `#[inline]` usage is a bit spotty.
- [x] Removed `?const` and change uses of `?const`
- [x] Added `~const` to the AST. It is gated behind const_trait_impl.
- [x] Validate `~const` in ast_validation.
- [ ] Add enum `BoundConstness` to the HIR. (With variants `NotConst` and
`ConstIfConst` allowing future extensions)
- [ ] Adjust trait selection and pre-existing code to use `BoundConstness`.
- [ ] Optional steps (*for this PR, obviously*)
- [ ] Fix#88155
- [ ] Do something with constness bounds in chalk
lazily "compute" anon const default substs
Continuing the work of #83086, this implements the discussed solution for the [unused substs problem](https://github.com/rust-lang/project-const-generics/blob/master/design-docs/anon-const-substs.md#unused-substs). As of now, anonymous constants inherit all of their parents generics, even if they do not use them, e.g. in `fn foo<T, const N: usize>() -> [T; N + 1]`, the array length has `T` as a generic parameter even though it doesn't use it. These *unused substs* cause some backwards incompatible, and imo incorrect behavior, e.g. #78369.
---
We do not actually filter any generic parameters here and the `default_anon_const_substs` query still a dummy which only checks that
- we now prevent the previously existing query cycles and are able to call `predicates_of(parent)` when computing the substs of anonymous constants
- the default anon consts substs only include the typeflags we assume it does.
Implementing that filtering will be left as future work.
---
The idea of this PR is to delay the creation of the anon const substs until after we've computed `predicates_of` for the parent of the anon const. As the predicates of the parent can however contain the anon const we still have to create a `ty::Const` for it.
We do this by changing the substs field of `ty::Unevaluated` to an option and modifying accesses to instead call the method `unevaluated.substs(tcx)` which returns the substs as before. If the substs - now `substs_` - of `ty::Unevaluated` are `None`, it means that the anon const currently has its default substs, i.e. the substs it has when first constructed, which are the generic parameters it has available. To be able to call `unevaluated.substs(tcx)` in a `TypeVisitor`, we add the non-defaulted method `fn tcx_for_anon_const_substs(&self) -> Option<TyCtxt<'tcx>>`. In case `tcx_for_anon_const_substs` returns `None`, unknown anon const default substs are skipped entirely.
Even when `substs_` is `None` we still have to treat the constant as if it has its default substs. To do this, `TypeFlags` are modified so that it is clear whether they can still change when *exposing* any anon const default substs. A new flag, `HAS_UNKNOWN_DEFAULT_CONST_SUBSTS`, is added in case some default flags are missing.
The rest of this PR are some smaller changes to either not cause cycles by trying to access the default anon const substs too early or to be able to access the `tcx` in previously unused locations.
cc `@rust-lang/project-const-generics`
r? `@nikomatsakis`
Fixes for LLVM change 0f45c16f2caa7c035e5c3edd40af9e0d51ad6ba7
More details in the individual commit messages, but the summary is: LLVM deleted an unused-to-them method that we used, we worked around it to avoid annoying cleanup/restructuring in the Rust-side code.
Fix debugger stepping behavior with `match` expressions
Previously, we would set up the source lines for `match` expressions so
that the code generated to perform the test of the scrutinee was matched
to the line of the arm that required the test and then jump from the arm
block to the "next" block was matched to all of the lines in the `match`
expression.
While that makes sense, it has the side effect of causing strange
stepping behavior in debuggers.
I've changed the source information so that all of the generated tests
are sourced to `match {scrutinee}` and the jumps are sourced to the last
line of the block they are inside. This resolves the weird stepping
behavior in all debuggers and resolves some instances of "ambiguous
symbol" errors in WinDbg preventing the user from setting breakpoints at
`match` expressions.
Before:
https://user-images.githubusercontent.com/831192/128577421-ee0c9c03-da28-4d16-997a-d57988a7bb7f.mp4
After:
https://user-images.githubusercontent.com/831192/128577433-2ceab04d-953e-4e31-9387-93f049c71ff3.mp4Fixes#87817
Morph `layout_raw` query into `layout_of`.
Before this PR, `LayoutCx::layout_of` wrapped the `layout_raw` query, to:
* normalize the type, before attempting to compute the layout
* pass the layout to `record_layout_for_printing`, for `-Zprint-type-sizes`
Moving those two responsibilities into the query may reduce overhead (due to cached calls skipping those steps), but I want to do a perf run to know.
One of the changes I had to make was changing the return type of the query, to be able to both get out the type produced by normalizing inside the query *and* to match the signature of the old `TyCtxt::layout_of`. This change may be worse, perf-wise, so that's another reason I want to check.
r? `@nagisa` cc `@oli-obk`
The above-mentioned commit (part of the LLVM 14 development cycle)
removes a method that rustc uses somewhat extensively. We mostly switch
to lower-level methods that exist in all versions of LLVM we use, so no
new ifdef logic is required in most cases.
Link the static libraries with "-bundle" modifier from upstream rust crate
right after linking this rust crate. Some linker such as GNU linker
`ld.bdf` treat order of linking as order of dependency. After this change,
static libraries with "-bundle" modifier is linked in the same order as
"+bundle" modifier. So we can change the value of "bundle" modifier without
causing linking error.
Use undef for uninitialized bytes in constants
Fixes#83657
This generates good code when the const is fully uninit, e.g.
```rust
#[no_mangle]
pub const fn fully_uninit() -> MaybeUninit<[u8; 10]> {
const M: MaybeUninit<[u8; 10]> = MaybeUninit::uninit();
M
}
```
generates
```asm
fully_uninit:
ret
```
as you would expect.
There is no improvement, however, when it's partially uninit, e.g.
```rust
pub struct PartiallyUninit {
x: u64,
y: MaybeUninit<[u8; 10]>
}
#[no_mangle]
pub const fn partially_uninit() -> PartiallyUninit {
const X: PartiallyUninit = PartiallyUninit { x: 0xdeadbeefcafe, y: MaybeUninit::uninit() };
X
}
```
generates
```asm
partially_uninit:
mov rax, rdi
mov rcx, qword ptr [rip + .L__unnamed_1+16]
mov qword ptr [rdi + 16], rcx
movups xmm0, xmmword ptr [rip + .L__unnamed_1]
movups xmmword ptr [rdi], xmm0
ret
.L__unnamed_1:
.asciz "\376\312\357\276\255\336\000"
.zero 16
.size .L__unnamed_1, 24
```
which copies a bunch of zeros in place of the undef bytes, the same as before this change.
Edit: generating partially-undef constants isn't viable at the moment anyways due to #84565, so it's disabled
Use if-let guards in the codebase and various other pattern cleanups
Dogfooding if-let guards as experimentation for the feature.
Tracking issue #51114. Conflicts with #87937.
* Highlight the whole pattern if it has no fields
* Highlight the whole definition if it has no fields
* Only highlight the pattern name if the pattern is multi-line
* Determine whether a pattern is multi-line based on distance from name
to last field, rather than first field
Normalize projections under binders
Fixes#70243Fixes#70120Fixes#62529Fixes#87219
Issues to followup on after (probably fixed, but no test added here):
#76956#56556#79207#85636
r? `@nikomatsakis`
Previously, we would set up the source lines for `match` expressions so
that the code generated to perform the test of the scrutinee was matched
to the line of the arm that required the test and then jump from the arm
block to the "next" block was matched to all of the lines in the `match`
expression.
While that makes sense, it has the side effect of causing strange
stepping behavior in debuggers.
I've changed the source information so that all of the generated tests
are sourced to `match {scrutinee}` and the jumps are sourced to the last
line of the block they are inside. This resolves the weird stepping
behavior in all debuggers and resolves some instances of "ambiguous
symbol" errors in WinDbg preventing the user from setting breakpoints at
`match` expressions.
Fix typo “a Rc” → “an Rc” (and a few more)
After stumbling about it in the dev-guide, I’ve devided to eliminate all mentions of “a Rc”, replacing it with “an Rc”. E.g.
```plain
$ rg "(^|[^'])\ba\b[^\w=:]*\bRc"
compiler/rustc_data_structures/src/owning_ref/mod.rs
1149:/// Typedef of a owning reference that uses a `Rc` as the owner.
library/std/src/ffi/os_str.rs
919: /// Converts a [`OsString`] into a [`Rc`]`<OsStr>` without copying or allocating.
library/std/src/ffi/c_str.rs
961: /// Converts a [`CString`] into a [`Rc`]`<CStr>` without copying or allocating.
src/doc/rustc-dev-guide/src/query.md
61:are cheaply cloneable; insert a `Rc` if necessary).
src/doc/book/src/ch15-06-reference-cycles.md
72:decreases the reference count of the `a` `Rc<List>` instance from 2 to 1 as
library/alloc/src/rc.rs
1746: /// Converts a generic type `T` into a `Rc<T>`
```
_(the match in the book is a false positive)_
Since the dev-guide is a submodule, it’s getting a separate PR: rust-lang/rustc-dev-guide#1191
I’ve also gone ahead and done the same search for `RwLock` and hit a few cases in the `OwningRef` adaption. Then, I couldn’t keep the countless cases of “a owning …” or “a owner” unaddressed, which concludes this PR.
`@rustbot` label C-cleanup
Remove `Session.trait_methods_not_found`
Instead, avoid registering the problematic well-formed obligation
to begin with. This removes global untracked mutable state,
and avoids potential issues with incremental compilation.
Refactor `named_asm_labels` to a HIR lint
As discussed on #88169, the `named_asm_labels` lint could be moved to a HIR lint. That allows future lints or custom plugins or clippy lints to more easily access the `asm!` macro's data and create better error messages with the lints.
Don't mark `if_let_guard` as an incomplete feature
I don't think there is any reason for `if_let_guard` to be an incomplete feature, and I think the reason they were marked in the first place was simply because they weren't implemented at all.
r? `@pnkfelix`
cc tracking issue #51114
Correctly handle remapping from path containing the current directory with trailing paths
If we have a `auxiliary/lib.rs`, and we generate the metadata with `--remap-path-prefix $PWD/auxiliary=xyz`, the path to `$PWD/auxiliary/lib.rs` won't be correctly remapped in the metadata. This is because internally, path to the working directory itself and relative paths to files under the working directory are remapped separately (hence neither are affected since neither has `$PWD/auxiliary` as prefix), but the concatenation between the working directory and the relative path is not remapped. This PR fixes that.
Improve detection of generics on lang items
Adds detection for the required generics for all lang items. Many lang items require an exact or minimum amount of generic arguments and if they don't exist, the compiler will ICE. This does not add any additional validation about bounds on generics or any other lang item restrictions.
Fixes one of the ICEs in #87573
cc `@FabianWolff`
Improve liveness analysis for generators
Liveness analysis for generators assumes that execution always continues
normally after a yield point, not accounting for the fact that generator
could be dropped before completion.
If generators captures any variables by reference, those variables could
be used within a generator, or when the generator completes, but also
after each yield point in the case the generator is dropped.
Account for the case when generator is dropped after yielding, but
before running to the completion. This effectively considers all
variables captured by reference to be used after a yield point.
Fixes#84292.
Use custom wrap-around type instead of RangeInclusive
Two reasons:
1. More memory is allocated than necessary for `valid_range` in `Scalar`. The range is not used as an iterator and `exhausted` is never used.
2. `contains`, `count` etc. methods in `RangeInclusive` are doing very unhelpful(and dangerous!) things when used as a wrap-around range. - In general this PR wants to limit potentially confusing methods, that have a low probability of working.
Doing a local perf run, every metric shows improvement except for instructions.
Max-rss seem to have a very consistent improvement.
Sorry - newbie here, probably doing something wrong.
Stabilize and document `--force-warn`
This PR will stabilize and document the `--force-warn` command line option. It is currently a draft, pending an FCP.
I've taken the liberty of tidying up the lint level command line options a bit as part of this. The changes are quite minor and should only affect rustc's help output. I'm making them here because they're trivial and, in one case, necessary to unify the way `--force-warn` with the way the other options are displayed.
I also want to mention that `@rylev` has done a ton of work on moving this along and deserves most of the credit. I'm just the one who landed up writing this particular PR.
Resolves#86516.
Allow specifying an deployment target version for all iOS llvm targets
Closes: https://github.com/rust-lang/rust/issues/79408
This pull requests adds the same procedure to define the iOS-version for the LLVM-target as was used for the simulator target and the desktop target.
This then closes the original problem mentioned in the above issue. The problem with incompatible bitcode remains, but is probably not easy fixable.
I realised that something is still not right. Try to fix that.
r? `@petrochenkov`
Liveness analysis for generators assumes that execution always continues
normally after a yield point, not accounting for the fact that generator
could be dropped before completion.
If generators captures any variables by reference, those variables could
be used within a generator, or when the generator completes, but also
after each yield point in the case the generator is dropped.
Account for the case when generator is dropped after yielding, but
before running to the completion. This effectively considers all
variables captured by reference to be used after a yield point.
Remove `Session.used_attrs` and move logic to `CheckAttrVisitor`
Instead of updating global state to mark attributes as used,
we now explicitly emit a warning when an attribute is used in
an unsupported position. As a side effect, we are to emit more
detailed warning messages (instead of just a generic "unused" message).
`Session.check_name` is removed, since its only purpose was to mark
the attribute as used. All of the callers are modified to use
`Attribute.has_name`
Additionally, `AttributeType::AssumedUsed` is removed - an 'assumed
used' attribute is implemented by simply not performing any checks
in `CheckAttrVisitor` for a particular attribute.
We no longer emit unused attribute warnings for the `#[rustc_dummy]`
attribute - it's an internal attribute used for tests, so it doesn't
mark sense to treat it as 'unused'.
With this commit, a large source of global untracked state is removed.
Warn about unreachable code following an expression with an uninhabited type
This pull request fixes#85071. The issue is that liveness analysis currently is "smarter" than reachability analysis when it comes to detecting uninhabited types: Unreachable code is detected during type checking, where full type information is not yet available. Therefore, the check for type inhabitedness is quite crude:
fc81ad22c4/compiler/rustc_typeck/src/check/expr.rs (L202-L205)
i.e. it only checks for `!`, but not other, non-trivially uninhabited types, such as empty enums, structs containing an uninhabited type, etc. By contrast, liveness analysis, which runs after type checking, can benefit from the more sophisticated `tcx.is_ty_uninhabited_from()`:
fc81ad22c4/compiler/rustc_passes/src/liveness.rs (L981)fc81ad22c4/compiler/rustc_passes/src/liveness.rs (L996)
This can lead to confusing warnings when a variable is reported as unused, but the use of the variable is not reported as unreachable. For instance:
```rust
enum Foo {}
fn f() -> Foo {todo!()}
fn main() {
let x = f();
let _ = x;
}
```
currently leads to
```
warning: unused variable: `x`
--> t1.rs:5:9
|
5 | let x = f();
| ^ help: if this is intentional, prefix it with an underscore: `_x`
|
= note: `#[warn(unused_variables)]` on by default
warning: 1 warning emitted
```
which is confusing, because `x` _appears_ to be used in line 6. With my changes, I get:
```
warning: unreachable expression
--> t1.rs:6:13
|
5 | let x = f();
| --- any code following this expression is unreachable
6 | let _ = x;
| ^ unreachable expression
|
= note: `#[warn(unreachable_code)]` on by default
note: this expression has type `Foo`, which is uninhabited
--> t1.rs:5:13
|
5 | let x = f();
| ^^^
warning: unused variable: `x`
--> t1.rs:5:9
|
5 | let x = f();
| ^ help: if this is intentional, prefix it with an underscore: `_x`
|
= note: `#[warn(unused_variables)]` on by default
warning: 2 warnings emitted
```
My implementation is slightly inelegant because unreachable code warnings can now be issued in two different places (during type checking and during liveness analysis), but I think it is the solution with the least amount of unnecessary code duplication, given that the new warning integrates nicely with liveness analysis, where unreachable code is already implicitly detected for the purpose of finding unused variables.
Get piece unchecked in `write`
We already use specialized `zip`, but it seems like we can do a little better by not checking `pieces` length at all.
`Arguments` constructors are now unsafe. So the `format_args!` expansion now includes an `unsafe` block.
<details>
<summary>Local Bench Diff</summary>
```text
name before ns/iter after ns/iter diff ns/iter diff % speedup
fmt::write_str_macro1 22,967 19,718 -3,249 -14.15% x 1.16
fmt::write_str_macro2 35,527 32,654 -2,873 -8.09% x 1.09
fmt::write_str_macro_debug 571,953 575,973 4,020 0.70% x 0.99
fmt::write_str_ref 9,579 9,459 -120 -1.25% x 1.01
fmt::write_str_value 9,573 9,572 -1 -0.01% x 1.00
fmt::write_u128_max 176 173 -3 -1.70% x 1.02
fmt::write_u128_min 138 134 -4 -2.90% x 1.03
fmt::write_u64_max 139 136 -3 -2.16% x 1.02
fmt::write_u64_min 129 135 6 4.65% x 0.96
fmt::write_vec_macro1 24,401 22,273 -2,128 -8.72% x 1.10
fmt::write_vec_macro2 37,096 35,602 -1,494 -4.03% x 1.04
fmt::write_vec_macro_debug 588,291 589,575 1,284 0.22% x 1.00
fmt::write_vec_ref 9,568 9,732 164 1.71% x 0.98
fmt::write_vec_value 9,516 9,625 109 1.15% x 0.99
```
</details>
Rollup of 6 pull requests
Successful merges:
- #87976 (Account for tabs when highlighting multiline code suggestions)
- #88174 (Clarify some wording in Rust 2021 lint docs)
- #88188 (Greatly improve limitation handling on parallel rustdoc GUI test run)
- #88230 (Fix typos “a”→“an”)
- #88232 (Add notes to macro-not-found diagnostics to point out how things with the same name were not a match.)
- #88259 (Do not mark `-Z thir-unsafeck` as unsound anymore)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Otherwise, we can get into a situation where you have
a subtype obligation `#1 <: #2` pending, #1 is constrained
by `check_casts`, but #2` is unaffected.
Co-authored-by: Niko Matsakis <niko@alum.mit.edu>
Do not mark `-Z thir-unsafeck` as unsound anymore
The initial implementation of the THIR unsafety checker is now complete (rust-lang/project-thir-unsafeck#7).
r? `@oli-obk`
Add notes to macro-not-found diagnostics to point out how things with the same name were not a match.
This adds notes like:
```
error: cannot find derive macro `Serialize` in this scope
--> $DIR/issue-88206.rs:22:10
|
LL | #[derive(Serialize)]
| ^^^^^^^^^
|
note: `Serialize` is imported here, but it is not a derive macro
--> $DIR/issue-88206.rs:17:11
|
LL | use hey::{Serialize, Deserialize};
| ^^^^^^^^^
```
Fixes https://github.com/rust-lang/rust/issues/88206
Includes https://github.com/rust-lang/rust/pull/88229
r? `@estebank`
2229: Handle MutBorrow/UniqueImmBorrow better
We only want to use UniqueImmBorrow when the capture place is truncated and we
drop Deref of a MutRef.
r? `@nikomatsakis`
Fixes: https://github.com/rust-lang/project-rfc-2229/issues/56
Stop emitting the `dso_local` LLVM attribute for external symbols under the static relocation model on macOS.
This matches Clang's behavior:
973cb2c326/clang/lib/CodeGen/CodeGenModule.cpp (L1038-L1040)
Even if `dso_local` were properly supported in this way on macOS, it seems
incorrect to add this annotation as liberally as we did. The `dso_local`
annotation is for symbols that ultimately end up in the same linkage unit, but
we were adding this annotation even for `static` values inside `extern` blocks
marked with `#[link(type="framework")]`, which should be considered dynamically
linked. Note that Clang likewise avoids emitting `dso_local` for `dllimport`
symbols:
973cb2c326/clang/lib/CodeGen/CodeGenModule.cpp (L1005-L1007)
This issue caused breakage in the `ring` crate, which links to a symbol defined
in `Security.framework` that ultimately resolves to address `0x0`:
b94d61e044/src/rand.rs (L390)
For this symbol, the use of `dso_local` causes LLVM to emit a relocation of
type `X86_64_RELOC_SIGNED`, which is a 32-bit signed PC-relative offset. If the
binary is large enough, `0x0` might be out of range, and the link will fail.
Avoiding `dso_local` causes LLVM to use the GOT instead, emitting a relocation
of type `X86_64_RELOC_GOT_LOAD`, which will properly handle the large offset
and cause the link to succeed.
As a side note, the static relocation model is effectively deprecated for
security reasons on macOS, as it prohibits PIE. It's also completely
unsupported on Apple Silicon, so I don't think it's worth going to the effort
of properly supporting this model on that platform.
