Specifically: `TokenCursor`, `TokenTreeCursor`,
`LazyAttrTokenStreamImpl`, `FlatToken`, `make_attr_token_stream`,
`ParserRange`, `NodeRange`. `ParserReplacement`, and `NodeReplacement`.
These are all related to token streams, rather than actual parsing.
This will facilitate the simplifications in the next commit.
Make #![feature(let_chains)] bootstrap conditional in compiler/
Let chains have been stabilized recently in #132833, so we can remove the gating from our uses in the compiler (as the compiler uses edition 2024).
Revert <https://github.com/rust-lang/rust/pull/138084> to buy time to
consider options that avoids breaking downstream usages of cargo on
distributed `rustc-src` artifacts, where such cargo invocations fail due
to inability to inherit `lints` from workspace root manifest's
`workspace.lints` (this is only valid for the source rust-lang/rust
workspace, but not really the distributed `rustc-src` artifacts).
This breakage was reported in
<https://github.com/rust-lang/rust/issues/138304>.
This reverts commit 48caf81484, reversing
changes made to c6662879b2.
```
error: couldn't read `$DIR/not-utf8-bin-file.rs`: stream did not contain valid UTF-8
--> $DIR/not-utf8-2.rs:6:5
|
LL | include!("not-utf8-bin-file.rs");
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
note: `[193]` is not valid utf-8
--> $DIR/not-utf8-bin-file.rs:2:14
|
LL | let _ = "�|�␂!5�cc␕␂��";
| ^
= note: this error originates in the macro `include` (in Nightly builds, run with -Z macro-backtrace for more info)
```
When we attempt to load a Rust source code file, if there is a OS file failure we try reading the file as bytes. If that succeeds we try to turn it into UTF-8. If *that* fails, we provide additional context about *where* the file has the first invalid UTF-8 character.
Fix#76869.
We already do this for a number of crates, e.g. `rustc_middle`,
`rustc_span`, `rustc_metadata`, `rustc_span`, `rustc_errors`.
For the ones we don't, in many cases the attributes are a mess.
- There is no consistency about order of attribute kinds (e.g.
`allow`/`deny`/`feature`).
- Within attribute kind groups (e.g. the `feature` attributes),
sometimes the order is alphabetical, and sometimes there is no
particular order.
- Sometimes the attributes of a particular kind aren't even grouped
all together, e.g. there might be a `feature`, then an `allow`, then
another `feature`.
This commit extends the existing sorting to all compiler crates,
increasing consistency. If any new attribute line is added there is now
only one place it can go -- no need for arbitrary decisions.
Exceptions:
- `rustc_log`, `rustc_next_trait_solver` and `rustc_type_ir_macros`,
because they have no crate attributes.
- `rustc_codegen_gcc`, because it's quasi-external to rustc (e.g. it's
ignored in `rustfmt.toml`).
Currently we have an awkward mix of fallible and infallible functions:
```
new_parser_from_source_str
maybe_new_parser_from_source_str
new_parser_from_file
(maybe_new_parser_from_file) // missing
(new_parser_from_source_file) // missing
maybe_new_parser_from_source_file
source_str_to_stream
maybe_source_file_to_stream
```
We could add the two missing functions, but instead this commit removes
of all the infallible ones and renames the fallible ones leaving us with
these which are all fallible:
```
new_parser_from_source_str
new_parser_from_file
new_parser_from_source_file
source_str_to_stream
source_file_to_stream
```
This requires making `unwrap_or_emit_fatal` public so callers of
formerly infallible functions can still work.
This does make some of the call sites slightly more verbose, but I think
it's worth it for the simpler API. Also, there are two `catch_unwind`
calls and one `catch_fatal_errors` call in this diff that become
removable thanks this change. (I will do that in a follow-up PR.)
The first one is out-of-date -- there are no longer functions expr,
item, stmt. And I don't know what a "HOF" is.
The second one doesn't really tell you anything.
- Convert it from a macro to a function, which is nicer.
- Rename it as `unwrap_or_emit_fatal`, which is clearer.
- Fix the comment. In particular, `panictry!` no longer exists.
- Remove the unnecessary `use` declaration.
It has a single call site.
This also means `CFG_ATTR_{GRAMMAR_HELP,NOTE_REF}` can be moved into
`parse_cfg_attr`, now that it's the only function that uses them.
And the commit removes the line break in the URL.
Lexing converts source text into a token stream. Parsing converts a
token stream into AST fragments. This commit renames several lexing
operations that have "parse" in the name. I think these names have been
subtly confusing me for years.
This is just a `s/parse/lex/` on function names, with one exception:
`parse_stream_from_source_str` becomes `source_str_to_stream`, to make
it consistent with the existing `source_file_to_stream`. The commit also
moves that function's location in the file to be just above
`source_file_to_stream`.
The commit also cleans up a few comments along the way.
I tried debugging a parser-related issue but found it annoying to not be
able to easily peek into the Parser's token stream.
Add a convenience fn that offers an opinionated view into the parser,
but one that is useful for answering basic questions about parser state.
Existing names for values of this type are `sess`, `parse_sess`,
`parse_session`, and `ps`. `sess` is particularly annoying because
that's also used for `Session` values, which are often co-located, and
it can be difficult to know which type a value named `sess` refers to.
(That annoyance is the main motivation for this change.) `psess` is nice
and short, which is good for a name used this much.
The commit also renames some `parse_sess_created` values as
`psess_created`.
That is, change `diagnostic_outside_of_impl` and
`untranslatable_diagnostic` from `allow` to `deny`, because more than
half of the compiler has be converted to use translated diagnostics.
This commit removes more `deny` attributes than it adds `allow`
attributes, which proves that this change is warranted.
One consequence is that errors returned by
`maybe_new_parser_from_source_str` now must be consumed, so a bunch of
places that previously ignored those errors now cancel them. (Most of
them explicitly dropped the errors before. I guess that was to indicate
"we are explicitly ignoring these", though I'm not 100% sure.)
Each of these has a single call site: `source_file_to_parser`,
`try_file_to_source_file`, `file_to_source_file`. Having them separate
just makes the code longer and harder to read.
Also, `maybe_file_to_stream` doesn't need to be `pub`.
In #119606 I added them and used a `_mv` suffix, but that wasn't great.
A `with_` prefix has three different existing uses.
- Constructors, e.g. `Vec::with_capacity`.
- Wrappers that provide an environment to execute some code, e.g.
`with_session_globals`.
- Consuming chaining methods, e.g. `Span::with_{lo,hi,ctxt}`.
The third case is exactly what we want, so this commit changes
`DiagnosticBuilder::foo_mv` to `DiagnosticBuilder::with_foo`.
Thanks to @compiler-errors for the suggestion.
This works for most of its call sites. This is nice, because `emit` very
much makes sense as a consuming operation -- indeed,
`DiagnosticBuilderState` exists to ensure no diagnostic is emitted
twice, but it uses runtime checks.
For the small number of call sites where a consuming emit doesn't work,
the commit adds `DiagnosticBuilder::emit_without_consuming`. (This will
be removed in subsequent commits.)
Likewise, `emit_unless` becomes consuming. And `delay_as_bug` becomes
consuming, while `delay_as_bug_without_consuming` is added (which will
also be removed in subsequent commits.)
All this requires significant changes to `DiagnosticBuilder`'s chaining
methods. Currently `DiagnosticBuilder` method chaining uses a
non-consuming `&mut self -> &mut Self` style, which allows chaining to
be used when the chain ends in `emit()`, like so:
```
struct_err(msg).span(span).emit();
```
But it doesn't work when producing a `DiagnosticBuilder` value,
requiring this:
```
let mut err = self.struct_err(msg);
err.span(span);
err
```
This style of chaining won't work with consuming `emit` though. For
that, we need to use to a `self -> Self` style. That also would allow
`DiagnosticBuilder` production to be chained, e.g.:
```
self.struct_err(msg).span(span)
```
However, removing the `&mut self -> &mut Self` style would require that
individual modifications of a `DiagnosticBuilder` go from this:
```
err.span(span);
```
to this:
```
err = err.span(span);
```
There are *many* such places. I have a high tolerance for tedious
refactorings, but even I gave up after a long time trying to convert
them all.
Instead, this commit has it both ways: the existing `&mut self -> Self`
chaining methods are kept, and new `self -> Self` chaining methods are
added, all of which have a `_mv` suffix (short for "move"). Changes to
the existing `forward!` macro lets this happen with very little
additional boilerplate code. I chose to add the suffix to the new
chaining methods rather than the existing ones, because the number of
changes required is much smaller that way.
This doubled chainging is a bit clumsy, but I think it is worthwhile
because it allows a *lot* of good things to subsequently happen. In this
commit, there are many `mut` qualifiers removed in places where
diagnostics are emitted without being modified. In subsequent commits:
- chaining can be used more, making the code more concise;
- more use of chaining also permits the removal of redundant diagnostic
APIs like `struct_err_with_code`, which can be replaced easily with
`struct_err` + `code_mv`;
- `emit_without_diagnostic` can be removed, which simplifies a lot of
machinery, removing the need for `DiagnosticBuilderState`.
`Diagnostic` has 40 methods that return `&mut Self` and could be
considered setters. Four of them have a `set_` prefix. This doesn't seem
necessary for a type that implements the builder pattern. This commit
removes the `set_` prefixes on those four methods.
Currently, `emit_diagnostic` takes `&mut self`.
This commit changes it so `emit_diagnostic` takes `self` and the new
`emit_diagnostic_without_consuming` function takes `&mut self`.
I find the distinction useful. The former case is much more common, and
avoids a bunch of `mut` and `&mut` occurrences. We can also restrict the
latter with `pub(crate)` which is nice.
Currently we always do this:
```
use rustc_fluent_macro::fluent_messages;
...
fluent_messages! { "./example.ftl" }
```
But there is no need, we can just do this everywhere:
```
rustc_fluent_macro::fluent_messages! { "./example.ftl" }
```
which is shorter.
