Properly calculate best failure in macro matching
Previously, we used spans. This was not good. Sometimes, the span of the token that failed to match may come from a position later in the file which has been transcribed into a token stream way earlier in the file. If precisely this token fails to match, we think that it was the best match because its span is so high, even though other arms might have gotten further in the token stream.
We now try to properly use the location in the token stream.
This needs a little cleanup as the `best_failure` field is getting out of hand but it should be mostly good to go. I hope I didn't violate too many abstraction boundaries..
Always suggest as `MachineApplicable` in `recover_intersection_pat`
This resolves one FIXME in `recover_intersection_pat` by always applying `MachineApplicable` when suggesting, as `bindings_after_at` is now stable.
This also separates a test to apply `// run-rustfix`.
Signed-off-by: Yuki Okushi <jtitor@2k36.org>
Previously, we used spans. This was not good. Sometimes, the span of the
token that failed to match may come from a position later in the file
which has been transcribed into a token stream way earlier in the file.
If precisely this token fails to match, we think that it was the best
match because its span is so high, even though other arms might have
gotten further in the token stream.
We now try to properly use the location in the token stream.
Remove `token::Lit` from `ast::MetaItemLit`.
Currently `ast::MetaItemLit` represents the literal kind twice. This PR removes that redundancy. Best reviewed one commit at a time.
r? `@petrochenkov`
propagate the error from parsing enum variant to the parser and emit out
While parsing enum variant, the error message always disappear
Because the error message that emit out is from main error of parser
The information of enum variant disappears while parsing enum variant with error
We only check the syntax of expecting token, i.e, in case https://github.com/rust-lang/rust/issues/103869
It will error it without telling the message that this error is from pasring enum variant.
Propagate the sub-error from parsing enum variant to the main error of parser by chaining it with map_err
Check the sub-error before emitting the main error of parser and attach it.
Fix https://github.com/rust-lang/rust/issues/103869
These two methods both produce a `MetaItemLit`, and then some of the
call sites convert the `MetaItemLit` to a `token::Lit` with
`as_token_lit`.
This commit parameterises these two methods with a `mk_lit_char`
closure, which can be used to produce either `MetaItemLit` or
`token::Lit` directly as necessary.
Fix ICE on invalid variable declarations in macro calls
This fixes ICE that happens with invalid variable declarations in macro calls like:
```rust
macro_rules! m { ($s:stmt) => {} }
m! { var x }
m! { auto x }
m! { mut x }
```
Found this is because of not collecting tokens on recovery, so I changed to force collect them.
Fixes https://github.com/rust-lang/rust/issues/103529.
Previously, the `recover_local_after_let` function was called from the
body of the `recover_stmt_local` function. Unifying these two functions
make it more simple and more readable.
Because the error message that emit out is from main error of parser
The information of enum variant disappears while parsing enum variant with error
We only check the syntax of expecting token, i.e, in case #103869
It will error it without telling the message that this error is from pasring enum variant.
Propagate the sub-error from parsing enum variant to the main error of parser by chaining it with map_err
Check the sub-error before emitting the main error of parser and attach it.
Fix#103869
`token::Lit` contains a `kind` field that indicates what kind of literal
it is. `ast::MetaItemLit` currently wraps a `token::Lit` but also has
its own `kind` field. This means that `ast::MetaItemLit` encodes the
literal kind in two different ways.
This commit changes `ast::MetaItemLit` so it no longer wraps
`token::Lit`. It now contains the `symbol` and `suffix` fields from
`token::Lit`, but not the `kind` field, eliminating the redundancy.
Lower them into a single item with multiple resolutions instead.
This also allows to remove additional `NodId`s and `DefId`s related to those additional items.
`check_builtin_attribute` calls `parse_meta` to convert an `Attribute`
to a `MetaItem`, which it then checks. However, many callers of
`check_builtin_attribute` start with a `MetaItem`, and then convert it
to an `Attribute` by calling `cx.attribute(meta_item)`. This `MetaItem`
to `Attribute` to `MetaItem` conversion is silly.
This commit adds a new function `check_builtin_meta_item`, which can be
called instead from these call sites. `check_builtin_attribute` also now
calls it. The commit also renames `check_meta` as `check_attr` to better
match its arguments.
Use `as_deref` in compiler (but only where it makes sense)
This simplifies some code :3
(there are some changes that are not exacly `as_deref`, but more like "clever `Option`/`Result` method use")
Split `MacArgs` in two.
`MacArgs` is an enum with three variants: `Empty`, `Delimited`, and `Eq`. It's used in two ways:
- For representing attribute macro arguments (e.g. in `AttrItem`), where all three variants are used.
- For representing function-like macros (e.g. in `MacCall` and `MacroDef`), where only the `Delimited` variant is used.
In other words, `MacArgs` is used in two quite different places due to them having partial overlap. I find this makes the code hard to read. It also leads to various unreachable code paths, and allows invalid values (such as accidentally using `MacArgs::Empty` in a `MacCall`).
This commit splits `MacArgs` in two:
- `DelimArgs` is a new struct just for the "delimited arguments" case. It is now used in `MacCall` and `MacroDef`.
- `AttrArgs` is a renaming of the old `MacArgs` enum for the attribute macro case. Its `Delimited` variant now contains a `DelimArgs`.
Various other related things are renamed as well.
These changes make the code clearer, avoids several unreachable paths, and disallows the invalid values.
r? `@petrochenkov`
`MacArgs` is an enum with three variants: `Empty`, `Delimited`, and `Eq`. It's
used in two ways:
- For representing attribute macro arguments (e.g. in `AttrItem`), where all
three variants are used.
- For representing function-like macros (e.g. in `MacCall` and `MacroDef`),
where only the `Delimited` variant is used.
In other words, `MacArgs` is used in two quite different places due to them
having partial overlap. I find this makes the code hard to read. It also leads
to various unreachable code paths, and allows invalid values (such as
accidentally using `MacArgs::Empty` in a `MacCall`).
This commit splits `MacArgs` in two:
- `DelimArgs` is a new struct just for the "delimited arguments" case. It is
now used in `MacCall` and `MacroDef`.
- `AttrArgs` is a renaming of the old `MacArgs` enum for the attribute macro
case. Its `Delimited` variant now contains a `DelimArgs`.
Various other related things are renamed as well.
These changes make the code clearer, avoids several unreachable paths, and
disallows the invalid values.
Rollup of 8 pull requests
Successful merges:
- #101162 (Migrate rustc_resolve to use SessionDiagnostic, part # 1)
- #103386 (Don't allow `CoerceUnsized` into `dyn*` (except for trait upcasting))
- #103405 (Detect incorrect chaining of if and if let conditions and recover)
- #103594 (Fix non-associativity of `Instant` math on `aarch64-apple-darwin` targets)
- #104006 (Add variant_name function to `LangItem`)
- #104494 (Migrate GUI test to use functions)
- #104516 (rustdoc: clean up sidebar width CSS)
- #104550 (fix a typo)
Failed merges:
- #104554 (Use `ErrorGuaranteed::unchecked_claim_error_was_emitted` less)
r? `@ghost`
`@rustbot` modify labels: rollup
Use `token::Lit` in `ast::ExprKind::Lit`.
Instead of `ast::Lit`.
Literal lowering now happens at two different times. Expression literals are lowered when HIR is crated. Attribute literals are lowered during parsing.
r? `@petrochenkov`
Instead of `ast::Lit`.
Literal lowering now happens at two different times. Expression literals
are lowered when HIR is crated. Attribute literals are lowered during
parsing.
This commit changes the language very slightly. Some programs that used
to not compile now will compile. This is because some invalid literals
that are removed by `cfg` or attribute macros will no longer trigger
errors. See this comment for more details:
https://github.com/rust-lang/rust/pull/102944#issuecomment-1277476773
Recover from function pointer types with generic parameter list
Give a more helpful error when encountering function pointer types with a generic parameter list like `fn<'a>(&'a str) -> bool` or `fn<T>(T) -> T` and suggest moving lifetime parameters to a `for<>` parameter list.
I've added a bunch of extra code to properly handle (unlikely?) corner cases like `for<'a> fn<'b>()` (where there already exists a `for<>` parameter list) correctly suggesting `for<'a, 'b> fn()` (merging the lists). If you deem this useless, I can simplify the code by suggesting nothing at all in this case.
I am quite open to suggestions regarding the wording of the diagnostic messages.
Fixes#103487.
``@rustbot`` label A-diagnostics
r? diagnostics
Delay `include_bytes` to AST lowering
Hopefully addresses #65818.
This PR introduces a new `ExprKind::IncludedBytes` which stores the path and bytes of a file included with `include_bytes!()`. We can then create a literal from the bytes during AST lowering, which means we don't need to escape the bytes into valid UTF8 which is the cause of most of the overhead of embedding large binary blobs.
Recover wrong-cased keywords that start items
(_this pr was inspired by [this tweet](https://twitter.com/Azumanga/status/1552982326409367561)_)
r? `@estebank`
We've talked a bit about this recovery, but I just wanted to make sure that this is the right approach :)
For now I've only added the case insensitive recovery to `use`s, since most other items like `impl` blocks, modules, functions can start with multiple keywords which complicates the matter.
Rollup of 9 pull requests
Successful merges:
- #102763 (Some diagnostic-related nits)
- #103443 (Parser: Recover from using colon as path separator in imports)
- #103675 (remove redundent "<>" for ty::Slice with reference type)
- #104046 (bootstrap: add support for running Miri on a file)
- #104115 (Migrate crate-search element to CSS variables)
- #104190 (Ignore "Change InferCtxtBuilder from enter to build" in git blame)
- #104201 (Add check in GUI test for file loading failure)
- #104211 (⬆️ rust-analyzer)
- #104231 (Update mailmap)
Failed merges:
- #104169 (Migrate `:target` rules to use CSS variables)
r? `@ghost`
`@rustbot` modify labels: rollup
Parser: Recover from using colon as path separator in imports
I don't know if this is the right approach, any feedback is welcome.
r? ```@compiler-errors```
Fixes#103269
Some diagnostic-related nits
1. Use `&mut Diagnostic` instead of `&mut DiagnosticBuilder<'_, T>`
2. Make `diag.span_suggestions` take an `IntoIterator` instead of `Iterator`, just to remove some `.into_iter` calls on the caller.
idk if I should add a lint to make sure people use `&mut Diagnostic` instead of `&mut DiagnosticBuilder<'_, T>` in cases where we're just, e.g., adding subdiagnostics to the diagnostic... maybe a followup.
It deals with eight cases: ints, floats, and the six quoted types
(char/byte/strings). For ints and floats we have an early return, and
the other six types fall through to the code at the end, which makes the
function hard to read.
This commit rearranges things to avoid the early returns.
There are three kinds of "byte" literals: byte literals, byte string
literals, and raw byte string literals. None are allowed to have
non-ASCII chars in them.
Two `EscapeError` variants exist for when that constraint is violated.
- `NonAsciiCharInByte`: used for byte literals and byte string literals.
- `NonAsciiCharInByteString`: used for raw byte string literals.
As a result, the messages for raw byte string literals use different
wording, without good reason. Also, byte string literals are incorrectly
described as "byte constants" in some error messages.
This commit eliminates `NonAsciiCharInByteString` so the three cases are
handled similarly, and described correctly. The `mode` is enough to
distinguish them.
Note: Some existing error messages mention "byte constants" and some
mention "byte literals". I went with the latter here, because it's a
more correct name, as used by the Reference.
It's passed to numerous places where we just need an `is_byte` bool.
Passing the bool avoids the need for some assertions.
Also rename `is_bytes()` as `is_byte()`, to better match `Mode::Byte`,
`Mode::ByteStr`, and `Mode::RawByteStr`.
Gate some parser recovery behind the check
Mainly in `expr.rs`. `may_recover` doesn't do anything useful yet until I implement that on top of #103439.
r? `@compiler-errors`
Change #[suggestion_*] attributes to use style="..."
As discussed [on Zulip](https://rust-lang.zulipchat.com/#narrow/stream/336883-i18n/topic/.23100717.20tool_only_span_suggestion), this changes `#[(multipart_)suggestion_{short,verbose,hidden}(...)]` attributes to plain `#[(multipart_)suggestion(...)]` attributes with a `style = "{short,verbose,hidden}"` parameter.
It also adds a new style, `tool-only`, that corresponds to `tool_only_span_suggestion`/`tool_only_multipart_suggestion` and causes the suggestion to not be shown in human-readable output at all.
Best reviewed commit-by-commit, there's a bit of noise in there.
cc #100717 `@compiler-errors`
r? `@davidtwco`
Track where diagnostics were created.
This implements the `-Ztrack-diagnostics` flag, which uses `#[track_caller]` to track where diagnostics are created. It is meant as a debugging tool much like `-Ztreat-err-as-bug`.
For example, the following code...
```rust
struct A;
struct B;
fn main(){
let _: A = B;
}
```
...now emits the following error message:
```
error[E0308]: mismatched types
--> src\main.rs:5:16
|
5 | let _: A = B;
| - ^ expected struct `A`, found struct `B`
| |
| expected due to this
-Ztrack-diagnostics: created at compiler\rustc_infer\src\infer\error_reporting\mod.rs:2275:31
```
Add flag to forbid recovery in the parser
To start the effort of fixing #103534, this adds a new flag to the parser, which forbids the parser from doing recovery, which it shouldn't do in macros.
This doesn't add any new checks for recoveries yet and is just here to bikeshed the names for the functions here before doing more.
r? `@compiler-errors`
Rollup of 6 pull requests
Successful merges:
- #101293 (Recover when unclosed char literal is parsed as a lifetime in some positions)
- #101908 (Suggest let for assignment, and some code refactor)
- #103192 (rustdoc: Eliminate uses of `EarlyDocLinkResolver::all_traits`)
- #103226 (Check `needs_infer` before `needs_drop` during HIR generator analysis)
- #103249 (resolve: Revert "Set effective visibilities for imports more precisely")
- #103305 (Move some tests to more reasonable places)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Flatten diagnostic slug modules
This makes it easier to grep for the slugs in the code.
See https://rust-lang.zulipchat.com/#narrow/stream/131828-t-compiler/topic/Localization.20infra.20interferes.20with.20grepping.20for.20error for more discussion about it.
This was mostly done with a few regexes and a bunch of manual work. This also exposes a pretty annoying inconsistency for the extra labels. Some of the extra labels are defined as additional properties in the fluent message (which makes them not prefixed with the crate name) and some of them are new fluent messages themselves (which makes them prefixed with the crate name). I don't know whether we want to clean this up at some point but it's useful to know.
r? `@davidtwco`
Fix `let` keyword removal suggestion in structs
(1.) Fixes a bug where, given this code:
```rust
struct Foo {
let x: i32,
}
```
We were parsing the field name as `let` instead of `x`, which causes issues later on in the type-checking phase.
(2.) Also, suggestions for `let: i32` as a field regressed, displaying this extra `help:` which is removed by this PR
```
help: remove the let, the `let` keyword is not allowed in struct field definitions
|
2 - let: i32,
2 + : i32,
```
(3.) Makes the suggestion text a bit more succinct, since we don't need to re-explain that `let` is not allowed in this position (since it's in a note that follows). This causes the suggestion to render inline as well.
cc `@gimbles,` this addresses a few nits I mentioned in your PR.
It's now only used in one function. Also, the "should we glue the
tokens?" check is only necessary when pushing a `TokenTree::Token`, not
when pushing a `TokenTree::Delimited`.
As part of this, we now do the "should we glue the tokens?" check
immediately, which avoids having look back at the previous token. It
also puts all the logic dealing with token gluing in a single place.
Remove `expr_parentheses_needed` from `ParseSess`
Not sure why this method needed to exist on `ParseSess`, but we can achieve the same behavior by just inlining it everywhere.
Group together more size assertions.
Also add a few more assertions for some relevant token-related types.
And fix an erroneous comment in `rustc_errors`.
r? `@lqd`
Improve errors for incomplete functions in struct definitions
Given the following code:
```rust
fn main() {}
struct Foo {
fn
}
```
[playground](https://play.rust-lang.org/?version=nightly&mode=debug&edition=2021&gist=29139f870511f6918324be5ddc26c345)
The current output is:
```
Compiling playground v0.0.1 (/playground)
error: functions are not allowed in struct definitions
--> src/main.rs:4:5
|
4 | fn
| ^^
|
= help: unlike in C++, Java, and C#, functions are declared in `impl` blocks
= help: see https://doc.rust-lang.org/book/ch05-03-method-syntax.html for more information
error: could not compile `playground` due to previous error
```
In this case, rustc should suggest escaping `fn` to use it as an identifier.
Migrate more of rustc_parse to SessionDiagnostic
Still far from complete, but I thought I'd add a checkpoint here because rebasing was starting to get annoying.
Rollup of 5 pull requests
Successful merges:
- #102143 (Recover from struct nested in struct)
- #102178 (bootstrap: the backtrace feature is stable, no need to allow it any more)
- #102197 (Stabilize const `BTree{Map,Set}::new`)
- #102267 (Don't set RUSTC in the bootstrap build script)
- #102270 (Remove benches from `rustc_middle`)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
`Cursor` is currently hidden, and the main tokenization path uses
`rustc_lexer::first_token` which involves constructing a new `Cursor`
for every single token, which is weird. Also, `first_token` also can't
handle empty input, so callers have to check for that first.
This commit makes `Cursor` public, so `StringReader` can contain a
`Cursor`, which results in a simpler structure. The commit also changes
`StringReader::advance_token` so it returns an `Option<Token>`,
simplifying the the empty input case.
`TokenTreesReader` wraps a `StringReader`, but the `into_token_trees`
function obscures this. This commit moves to a more straightforward
control flow.
The spacing computation is done in two parts. In the first part
`next_token` and `bump` use `Spacing::Alone` to mean "preceded by
whitespace" and `Spacing::Joint` to mean the opposite. In the second
part `parse_token_tree_other` then adjusts the `spacing` value to mean
the usual thing (i.e. "is the following token joinable punctuation?").
This shift in meaning is very confusing and it took me some time to
understand what was going on.
This commit changes the first part to use a bool, and adds some
comments, which makes things much clearer.
`parse_token_tree` is basically a match with four arms: `Eof`,
`OpenDelim`, `CloseDelim`, and "other". It has two call sites, and at
each call site one of the arms is unreachable. It's also not inlined.
This commit removes `parse_token_tree` by splitting it into four
functions and inlining them. This avoids some repeated conditional
tests and also some non-inlined function calls on the hot path.
FIX - ambiguous Diagnostic link in docs
UPDATE - rename diagnostic_items to IntoDiagnostic and AddToDiagnostic
[Gardening] FIX - formatting via `x fmt`
FIX - rebase conflicts. NOTE: Confirm wheather or not we want to handle TargetDataLayoutErrorsWrapper this way
DELETE - unneeded allow attributes in Handler method
FIX - broken test
FIX - Rebase conflict
UPDATE - rename residual _SessionDiagnostic and fix LintDiag link
On later stages, the feature is already stable.
Result of running:
rg -l "feature.let_else" compiler/ src/librustdoc/ library/ | xargs sed -s -i "s#\\[feature.let_else#\\[cfg_attr\\(bootstrap, feature\\(let_else\\)#"
make `mk_attr_id` part of `ParseSess`
Updates #48685
The current `mk_attr_id` uses the `AtomicU32` type, which is not very efficient and adds a lot of lock contention in a parallel environment.
This PR refers to the task list in #48685, uses `mk_attr_id` as a method of the `AttrIdGenerator` struct, and adds a new field `attr_id_generator` to `ParseSess`.
`AttrIdGenerator` uses the `WorkerLocal`, which has two advantages: 1. `Cell` is more efficient than `AtomicU32`, and does not increase any lock contention. 2. We put the index of the work thread in the first few bits of the generated `AttrId`, so that the `AttrId` generated in different threads can be easily guaranteed to be unique.
cc `@cjgillot`
Initial implementation of dyn*
This PR adds extremely basic and incomplete support for [dyn*](https://smallcultfollowing.com/babysteps//blog/2022/03/29/dyn-can-we-make-dyn-sized/). The goal is to get something in tree behind a flag to make collaboration easier, and also to make sure the implementation so far is not unreasonable. This PR does quite a few things:
* Introduce `dyn_star` feature flag
* Adds parsing for `dyn* Trait` types
* Defines `dyn* Trait` as a sized type
* Adds support for explicit casts, like `42usize as dyn* Debug`
* Including const evaluation of such casts
* Adds codegen for drop glue so things are cleaned up properly when a `dyn* Trait` object goes out of scope
* Adds codegen for method calls, at least for methods that take `&self`
Quite a bit is still missing, but this gives us a starting point. Note that this is never intended to become stable surface syntax for Rust, but rather `dyn*` is planned to be used as an implementation detail for async functions in dyn traits.
Joint work with `@nikomatsakis` and `@compiler-errors.`
r? `@bjorn3`
The primary purpose of this commit is to introduce the
dyn_star flag so we can begin experimenting with implementation.
In order to have something to do in the feature gate test, we also add
parser support for `dyn* Trait` objects. These are currently treated
just like `dyn Trait` objects, but this will change in the future.
Note that for now `dyn* Trait` is experimental syntax to enable
implementing some of the machinery needed for async fn in dyn traits
without fully supporting the feature.
`To` is better than `Create` for indicating that this is a non-consuming
conversion, rather than creating something out of nothing.
And the addition of `Attr` is because the current names makes them sound
like they relate to `TokenStream`, but really they relate to
`AttrTokenStream`.
These two type names are long and have long matching prefixes. I find
them hard to read, especially in combinations like
`AttrAnnotatedTokenStream::new(vec![AttrAnnotatedTokenTree::Token(..)])`.
This commit renames them as `AttrToken{Stream,Tree}`.
Recover from using `;` as separator between fields
Partially fixes#101440 (only for record structs).
Doing that for tuple structs is harder as their parsing passes through a bunch of helper functions. I don't know how to do that. But [their error message is better anyway](https://play.rust-lang.org/?version=stable&mode=debug&edition=2021&gist=cc6ee8bb2593596c0cea89d49e79bcb4) and suggests using a comma, even if it doesn't suggest replacing the semicolon with it.
Update `SessionDiagnostic::into_diagnostic` to take `Handler` instead of `ParseSess`
Suggested by the team in [this Zulip Topic](https://rust-lang.zulipchat.com/#narrow/stream/336883-i18n/topic/.23100717.20SessionDiagnostic.20on.20Handler).
`Handler` already has almost all the capabilities of `ParseSess` when it comes to diagnostic emission, in this migration we only needed to add the ability to access `source_map` from the emitter in order to get a `Snippet` and the `start_point`. Not sure if adding these two methods [`span_to_snippet_from_emitter` and `span_start_point_from_emitter`] is the best way to address this gap.
P.S. If this goes in the right direction, then we probably may want to move `SessionDiagnostic` to `rustc_errors` and rename it to `DiagnosticHandler` or something similar.
r? `@davidtwco`
r? `@compiler-errors`
Suggest removing unnecessary prefix let in patterns
Helps with #101291, though I think `@estebank` probably wants this:
> Finally, I think it'd be nice if we could detect that we don't know for sure and "just" swallow the rest of the expression (find the next ; accounting for nested braces) or the end of the item (easier).
... to be implemented before we close that issue out completely.
`BindingAnnotation` refactor
* `ast::BindingMode` is deleted and replaced with `hir::BindingAnnotation` (which is moved to `ast`)
* `BindingAnnotation` is changed from an enum to a tuple struct e.g. `BindingAnnotation(ByRef::No, Mutability::Mut)`
* Associated constants added for convenience `BindingAnnotation::{NONE, REF, MUT, REF_MUT}`
One goal is to make it more clear that `BindingAnnotation` merely represents syntax `ref mut` and not the actual binding mode. This was especially confusing since we had `ast::BindingMode`->`hir::BindingAnnotation`->`thir::BindingMode`.
I wish there were more symmetry between `ByRef` and `Mutability` (variant) naming (maybe `Mutable::Yes`?), and I also don't love how long the name `BindingAnnotation` is, but this seems like the best compromise. Ideas welcome.
Suggested by the team in this Zulip Topic https://rust-lang.zulipchat.com/#narrow/stream/336883-i18n/topic/.23100717.20SessionDiagnostic.20on.20Handler
Handler already has almost all the capabilities of ParseSess when it comes to diagnostic emission, in this migration we only needed to add the ability to access source_map from the emitter in order to get a Snippet and the start_point. Not sure if this is the best way to address this gap
Replace `rustc_data_structures::thin_vec::ThinVec` with `thin_vec::ThinVec`
`rustc_data_structures::thin_vec::ThinVec` looks like this:
```
pub struct ThinVec<T>(Option<Box<Vec<T>>>);
```
It's just a zero word if the vector is empty, but requires two
allocations if it is non-empty. So it's only usable in cases where the
vector is empty most of the time.
This commit removes it in favour of `thin_vec::ThinVec`, which is also
word-sized, but stores the length and capacity in the same allocation as
the elements. It's good in a wider variety of situation, e.g. in enum
variants where the vector is usually/always non-empty.
The commit also:
- Sorts some `Cargo.toml` dependency lists, to make additions easier.
- Sorts some `use` item lists, to make additions easier.
- Changes `clean_trait_ref_with_bindings` to take a
`ThinVec<TypeBinding>` rather than a `&[TypeBinding]`, because this
avoid some unnecessary allocations.
r? `@spastorino`
This PR will fix some typos detected by [typos].
I only picked the ones I was sure were spelling errors to fix, mostly in
the comments.
[typos]: https://github.com/crate-ci/typos
`rustc_data_structures::thin_vec::ThinVec` looks like this:
```
pub struct ThinVec<T>(Option<Box<Vec<T>>>);
```
It's just a zero word if the vector is empty, but requires two
allocations if it is non-empty. So it's only usable in cases where the
vector is empty most of the time.
This commit removes it in favour of `thin_vec::ThinVec`, which is also
word-sized, but stores the length and capacity in the same allocation as
the elements. It's good in a wider variety of situation, e.g. in enum
variants where the vector is usually/always non-empty.
The commit also:
- Sorts some `Cargo.toml` dependency lists, to make additions easier.
- Sorts some `use` item lists, to make additions easier.
- Changes `clean_trait_ref_with_bindings` to take a
`ThinVec<TypeBinding>` rather than a `&[TypeBinding]`, because this
avoid some unnecessary allocations.
Convert diagnostics in parser/expr to SessionDiagnostic
This migrates all the easy cases in `rustc_parse::parser::expr` to `SessionDiagnostic`s, I've left things such as `multipart_suggestion`s out for now in the hopes of a derive API being developed soon.
Recover keywords in trait bounds
(_this pr was inspired by [this tweet](https://twitter.com/Azumanga/status/1552982326409367561)_)
Recover keywords in trait bound, motivational example:
```rust
fn f(_: impl fn()) {} // mistyped, meant `Fn`
```
<details><summary>Current nightly (3 needless and confusing errors!)</summary>
<p>
```text
error: expected identifier, found keyword `fn`
--> ./t.rs:1:15
|
1 | fn _f(_: impl fn()) {}
| ^^ expected identifier, found keyword
|
help: escape `fn` to use it as an identifier
|
1 | fn _f(_: impl r#fn()) {}
| ++
error: expected one of `:` or `|`, found `)`
--> ./t.rs:1:19
|
1 | fn _f(_: impl fn()) {}
| ^ expected one of `:` or `|`
error: expected one of `!`, `(`, `)`, `,`, `?`, `for`, `~`, lifetime, or path, found keyword `fn`
--> ./t.rs:1:15
|
1 | fn _f(_: impl fn()) {}
| -^^ expected one of 9 possible tokens
| |
| help: missing `,`
error: at least one trait must be specified
--> ./t.rs:1:10
|
1 | fn _f(_: impl fn()) {}
| ^^^^
```
</p>
</details>
This PR:
```text
error: expected identifier, found keyword `fn`
--> ./t.rs:1:15
|
1 | fn _f(_: impl fn()) {}
| ^^ expected identifier, found keyword
|
help: escape `fn` to use it as an identifier
|
1 | fn _f(_: impl r#fn()) {}
| ++
error[E0405]: cannot find trait `r#fn` in this scope
--> ./t.rs:1:15
|
1 | fn _f(_: impl fn()) {}
| ^^ help: a trait with a similar name exists (notice the capitalization): `Fn`
|
::: /home/waffle/projects/repos/rust/library/core/src/ops/function.rs:74:1
|
74 | pub trait Fn<Args>: FnMut<Args> {
| ------------------------------- similarly named trait `Fn` defined here
```
It would be nice to have suggestion in the first error like "have you meant `Fn` trait", instead of a separate error, but the recovery is deep inside ident parsing, which makes it a lot harder to do.
r? `@compiler-errors`
In some places we use `Vec<Attribute>` and some places we use
`ThinVec<Attribute>` (a.k.a. `AttrVec`). This results in various points
where we have to convert between `Vec` and `ThinVec`.
This commit changes the places that use `Vec<Attribute>` to use
`AttrVec`. A lot of this is mechanical and boring, but there are
some interesting parts:
- It adds a few new methods to `ThinVec`.
- It implements `MapInPlace` for `ThinVec`, and introduces a macro to
avoid the repetition of this trait for `Vec`, `SmallVec`, and
`ThinVec`.
Overall, it makes the code a little nicer, and has little effect on
performance. But it is a precursor to removing
`rustc_data_structures::thin_vec::ThinVec` and replacing it with
`thin_vec::ThinVec`, which is implemented more efficiently.
Migrate "invalid variable declaration" errors to SessionDiagnostic
After seeing the great blog post on Inside Rust, I decided to try my hand at this. Just one diagnostic for now to get used to the workflow and to check if this is the way to do it or if there are any problems.
Fix documentation of rustc_parse::parser::Parser::parse_stmt_without_recovery
Something seems to have gotten out of sync during the creation of #81177, where both the argument and comment were introduced.
- Rename `ast::Lit::token` as `ast::Lit::token_lit`, because its type is
`token::Lit`, which is not a token. (This has been confusing me for a
long time.)
reasonable because we have an `ast::token::Lit` inside an `ast::Lit`.
- Rename `LitKind::{from,to}_lit_token` as
`LitKind::{from,to}_token_lit`, to match the above change and
`token::Lit`.
Adjust span of fn argument declaration
Span of a fn argument declaration goes from:
```
fn foo(i : i32 , ...)
^^^^^^^^
```
to:
```
fn foo(i : i32 , ...)
^^^^^^^
```
That is, we don't include the extra spacing up to the trailing comma, which I think is more correct.
cc https://github.com/rust-lang/rust/pull/99646#discussion_r944568074
r? ``@estebank``
---
The two tests that had dramatic changes in their rendering I think actually are improved, though they are kinda poor spans both before and after the changes. 🤷 Thoughts?
`Parser::parse_bottom_expr` currently constructs an empty `attrs` and
then passes it to a large number of other functions. This makes the code
harder to read than it should be, because it's not clear that many
`attrs` arguments are always empty.
This commit removes `attrs` and the passing, simplifying a lot of
functions. The commit also renames `Parser::mk_expr` (which takes an
`attrs` argument) as `mk_expr_with_attrs`, and introduces a new
`mk_expr` which creates an expression with no attributes, which is the
more common case.
Stringify non-shorthand visibility correctly
This makes `stringify!(pub(in crate))` evaluate to `pub(in crate)` rather than `pub(crate)`, matching the behavior before the `crate` shorthand was removed. Further, this changes `stringify!(pub(in super))` to evaluate to `pub(in super)` rather than the current `pub(super)`. If the latter is not desired (it is _technically_ breaking), it can be undone.
Fixes#99981
`@rustbot` label +C-bug +regression-from-stable-to-beta +T-compiler
Use `&mut Diagnostic` instead of `&mut DiagnosticBuilder` unless needed
This seems to be the established convention (02ff9e0) when `DiagnosticBuilder` was first added. I am guilty of introducing some of these.
Improve diagnostics for `const a: = expr;`
Adds a suggestion to write a type when there is a colon, but the type is not present.
I've also shrunk spans a little, so the suggestions are a little nicer.
Resolves#100146
r? `@compiler-errors`
Use Parser's `restrictions` instead of `let_expr_allowed`
This also means that the `ALLOW_LET` flag is reset properly for subexpressions, so we can properly deny things like `a && (b && let c = d)`. Also the parser is a tiny bit smaller now.
It doesn't reject _all_ bad `let` expr usages, just a bit more.
cc `@c410-f3r`
From 72 bytes to 12 bytes (on x86-64).
There are two parts to this:
- Changing various source code offsets from 64-bit to 32-bit. This is
not a problem because the rest of rustc also uses 32-bit source code
offsets. This means `Token` is no longer `Copy` but this causes no
problems.
- Removing the `RawStrError` from `LiteralKind`. Raw string literal
invalidity is now indicated by a `None` value within
`RawStr`/`RawByteStr`, and the new `validate_raw_str` function can be
used to re-lex an invalid raw string literal to get the `RawStrError`.
There is one very small change in behaviour. Previously, if a raw string
literal matched both the `InvalidStarter` and `TooManyHashes` cases,
the latter would override the former. This has now changed, because
`raw_double_quoted_string` now uses `?` and so returns immediately upon
detecting the `InvalidStarter` case. I think this is a slight
improvement to report the earlier-detected error, and it explains the
change in the `test_too_many_hashes` test.
The commit also removes a couple of comments that refer to #77629 and
say that the size of these types don't affect performance. These
comments are wrong, though the performance effect is small.
Rollup of 5 pull requests
Successful merges:
- #99311 (change maybe_body_owned_by to take local def id)
- #99862 (Improve type mismatch w/ function signatures)
- #99895 (don't call type ascription "cast")
- #99900 (remove some manual hash stable impls)
- #99903 (Add diagnostic when using public instead of pub)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Add diagnostic when using public instead of pub
Forwarding from https://github.com/rust-lang/rust/pull/99706
I accidentally broke something(??) in git and the commits in that PR are absolutely not what I did in that branch
Anyways, this is the PR for this now. Adding tests again in a minute.
cc `@davidtwco`
Remove `TreeAndSpacing`.
A `TokenStream` contains a `Lrc<Vec<(TokenTree, Spacing)>>`. But this is
not quite right. `Spacing` makes sense for `TokenTree::Token`, but does
not make sense for `TokenTree::Delimited`, because a
`TokenTree::Delimited` cannot be joined with another `TokenTree`.
This commit fixes this problem, by adding `Spacing` to `TokenTree::Token`,
changing `TokenStream` to contain a `Lrc<Vec<TokenTree>>`, and removing the
`TreeAndSpacing` typedef.
The commit removes these two impls:
- `impl From<TokenTree> for TokenStream`
- `impl From<TokenTree> for TreeAndSpacing`
These were useful, but also resulted in code with many `.into()` calls
that was hard to read, particularly for anyone not highly familiar with
the relevant types. This commit makes some other changes to compensate:
- `TokenTree::token()` becomes `TokenTree::token_{alone,joint}()`.
- `TokenStream::token_{alone,joint}()` are added.
- `TokenStream::delimited` is added.
This results in things like this:
```rust
TokenTree::token(token::Semi, stmt.span).into()
```
changing to this:
```rust
TokenStream::token_alone(token::Semi, stmt.span)
```
This makes the type of the result, and its spacing, clearer.
These changes also simplifies `Cursor` and `CursorRef`, because they no longer
need to distinguish between `next` and `next_with_spacing`.
r? `@petrochenkov`
A `TokenStream` contains a `Lrc<Vec<(TokenTree, Spacing)>>`. But this is
not quite right. `Spacing` makes sense for `TokenTree::Token`, but does
not make sense for `TokenTree::Delimited`, because a
`TokenTree::Delimited` cannot be joined with another `TokenTree`.
This commit fixes this problem, by adding `Spacing` to `TokenTree::Token`,
changing `TokenStream` to contain a `Lrc<Vec<TokenTree>>`, and removing the
`TreeAndSpacing` typedef.
The commit removes these two impls:
- `impl From<TokenTree> for TokenStream`
- `impl From<TokenTree> for TreeAndSpacing`
These were useful, but also resulted in code with many `.into()` calls
that was hard to read, particularly for anyone not highly familiar with
the relevant types. This commit makes some other changes to compensate:
- `TokenTree::token()` becomes `TokenTree::token_{alone,joint}()`.
- `TokenStream::token_{alone,joint}()` are added.
- `TokenStream::delimited` is added.
This results in things like this:
```rust
TokenTree::token(token::Semi, stmt.span).into()
```
changing to this:
```rust
TokenStream::token_alone(token::Semi, stmt.span)
```
This makes the type of the result, and its spacing, clearer.
These changes also simplifies `Cursor` and `CursorRef`, because they no longer
need to distinguish between `next` and `next_with_spacing`.
This commit updates the source_file_to_parser and the
maybe_source_file_to_parse function's doc comments which currently
refer to a config parameter. The doc comments have been updated to
refer to the 'session' parameter similar to the doc comment for
try_file_to_source_file, which also takes a &Session parameter.
Implement `for<>` lifetime binder for closures
This PR implements RFC 3216 ([TI](https://github.com/rust-lang/rust/issues/97362)) and allows code like the following:
```rust
let _f = for<'a, 'b> |a: &'a A, b: &'b B| -> &'b C { b.c(a) };
// ^^^^^^^^^^^--- new!
```
cc ``@Aaron1011`` ``@cjgillot``
diagnostics: error messages when struct literals fail to parse
If an expression is supplied where a field is expected, the parser can become convinced that it's a shorthand field syntax when it's not.
This PR addresses it by explicitly recording the permitted `:` token immediately after the identifier, and also adds a suggestion to insert the name of the field if it looks like a complex expression.
Fixes#98917
Fix last `let_chains` blocker
In order to forbid things like `let x = (let y = 1);` or `if let a = 1 && { let x = let y = 1; } {}`, the parser **HAS** to know the context of `let`.
This context thing is not a surprise in the parser because you can see **a lot** of ad hoc fixes mixing parsing logic with validation logic creating code that looks more like spaghetti with tomato sauce.
To make things even greater, a new ad hoc fix was added to only allow `let`s in a valid `let_chains` context by checking the previously processed token. This was the only solution I could think of and believe me, I thought about it for a long time 👍
In the long term, it should be preferable to segregate different responsibilities or create a more robust and cleaner parser framework.
cc https://github.com/rust-lang/rust/pull/94927
cc https://github.com/rust-lang/rust/issues/53667
Use less string interning
This removes string interning in a couple of places where doing so won't result in perf improvements. I also switched one place to use pre-interned symbols.
Avoid some `&str` to `String` conversions with `MultiSpan::push_span_label`
This patch removes some`&str` to `String` conversions with `MultiSpan::push_span_label`.
The `rustc_lint_diagnostics` attribute is used by the diagnostic
translation/struct migration lints to identify calls where
non-translatable diagnostics or diagnostics outwith impls are being
created. Any function used in creating a diagnostic should be annotated
with this attribute so this commit adds the attribute to many more
functions.
Signed-off-by: David Wood <david.wood@huawei.com>
macros: use typed identifiers in diag and subdiag derive
Using typed identifiers instead of strings with the Fluent identifiers in the diagnostic and subdiagnostic derives - this enables the diagnostic derive to benefit from the compile-time validation that comes with typed identifiers, namely that use of a non-existent Fluent identifier will not compile.
r? `````@oli-obk`````
As in the diagnostic derive, using typed identifiers in the
subdiagnostic derive improves the diagnostics of using the subdiagnostic
derive as Fluent messages will be confirmed to exist at compile-time.
Signed-off-by: David Wood <david.wood@huawei.com>
Using typed identifiers instead of strings with the Fluent identifier
enables the diagnostic derive to benefit from the compile-time
validation that comes with typed identifiers - use of a non-existent
Fluent identifier will not compile.
Signed-off-by: David Wood <david.wood@huawei.com>
Fix pretty printing of empty bound lists in where-clause
Repro:
```rust
macro_rules! assert_item_stringify {
($item:item $expected:literal) => {
assert_eq!(stringify!($item), $expected);
};
}
fn main() {
assert_item_stringify! {
fn f<'a, T>() where 'a:, T: {}
"fn f<'a, T>() where 'a:, T: {}"
}
}
```
Previously this assertion would fail because rustc renders the where-clause as `where 'a, T` which is invalid syntax.
This PR makes the above assertion pass.
This bug also affects `-Zunpretty=expanded`. The intention is for that to emit syntactically valid code, but the buggy output is not valid Rust syntax.
```console
$ rustc <(echo "fn f<'a, T>() where 'a:, T: {}") -Zunpretty=expanded
#![feature(prelude_import)]
#![no_std]
#[prelude_import]
use ::std::prelude::rust_2015::*;
#[macro_use]
extern crate std;
fn f<'a, T>() where 'a, T {}
```
```console
$ rustc <(echo "fn f<'a, T>() where 'a:, T: {}") -Zunpretty=expanded | rustc -
error: expected `:`, found `,`
--> <anon>:7:23
|
7 | fn f<'a, T>() where 'a, T {}
| ^ expected `:`
```
Improve parser diagnostics
This pr fixes https://github.com/rust-lang/rust/issues/93867 and contains a couple of diagnostics related changes to the parser.
Here is a short list with some of the changes:
- don't suggest the same thing that is the current token
- suggest removing the current token if the following token is one of the suggestions (maybe incorrect)
- tell the user to put a type or lifetime after where if there is none (as a warning)
- reduce the amount of tokens suggested (via the new eat_noexpect and check_noexpect methods)
If any of these changes are undesirable, i can remove them, thanks!
Recover missing comma after match arm
If we're missing a comma after a match arm expression, try parsing another pattern and a following `=>`. If we find both of those, then recover by suggesting to insert a `,`.
Fixes#80112
Move conditions out of recover/report functions.
`Parser` has six recover/report functions that are passed a boolean, and
nothing is done if the boolean has a particular value.
This PR moves the tests outside the functions. This has the following effects.
- The number of lines of code goes down.
- Some `use` items become shorter.
- Avoids the strangeness whereby 11 out of 12 calls to
`maybe_recover_from_bad_qpath` pass `true` as the second argument.
- Makes it clear at the call site that only one of
`maybe_recover_from_bad_type_plus` and `maybe_report_ambiguous_plus` will be
run.
r? `@estebank`
Rollup of 6 pull requests
Successful merges:
- #89685 (refactor: VecDeques Iter fields to private)
- #97172 (Optimize the diagnostic generation for `extern unsafe`)
- #97395 (Miri call ABI check: ensure type size+align stay the same)
- #97431 (don't do `Sized` and other return type checks on RPIT's real type)
- #97555 (Source code page: line number click adds `NaN`)
- #97558 (Fix typos in comment)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Optimize the diagnostic generation for `extern unsafe`
This PR does the following about diagnostic generation when parsing foreign mod:
1. Fixes the FIXME about avoiding depending on the error message text.
2. Continue parsing when `unsafe` is followed by `{` (just like `unsafe extern {...}`).
3. Add test case.
To render the message of a Fluent attribute, the identifier of the
Fluent message must be known. `DiagnosticMessage::FluentIdentifier`
contains both the message's identifier and optionally the identifier of
an attribute. Generated constants for each attribute would therefore
need to be named uniquely (amongst all error messages) or be able to
refer to only the attribute identifier which will be combined with a
message identifier later. In this commit, the latter strategy is
implemented as part of the `Diagnostic` type's functions for adding
subdiagnostics of various kinds.
Signed-off-by: David Wood <david.wood@huawei.com>
Parse expression after `else` as a condition if followed by `{`
Fixes#49361.
Two things:
1. This wording needs help. I can never find a natural/intuitive phrasing when I write diagnostics 😅
2. Do we even want to show the "wrap in braces" case? I would assume most of the time the "add an `if`" case is the right one.
Remove hacks in `make_token_stream`.
`make_tokenstream` has three commented hacks, and a comment at the top
referring to #67062. These hacks have no observable effect, at least as judged
by running the test suite. The hacks were added in #82608, with an explanation
[here](https://github.com/rust-lang/rust/pull/82608#issuecomment-812877329). It
appears that one of the following is true: (a) they never did anything useful,
(b) they do something useful but we have no test coverage for them, or (c)
something has changed in the meantime that means they are no longer necessary.
This commit removes the hacks and the comments, in the hope that (b) is not
true.
r? `@Aaron1011`
Begin fixing all the broken doctests in `compiler/`
Begins to fix#95994.
All of them pass now but 24 of them I've marked with `ignore HELP (<explanation>)` (asking for help) as I'm unsure how to get them to work / if we should leave them as they are.
There are also a few that I marked `ignore` that could maybe be made to work but seem less important.
Each `ignore` has a rough "reason" for ignoring after it parentheses, with
- `(pseudo-rust)` meaning "mostly rust-like but contains foreign syntax"
- `(illustrative)` a somewhat catchall for either a fragment of rust that doesn't stand on its own (like a lone type), or abbreviated rust with ellipses and undeclared types that would get too cluttered if made compile-worthy.
- `(not-rust)` stuff that isn't rust but benefits from the syntax highlighting, like MIR.
- `(internal)` uses `rustc_*` code which would be difficult to make work with the testing setup.
Those reason notes are a bit inconsistently applied and messy though. If that's important I can go through them again and try a more principled approach. When I run `rg '```ignore \(' .` on the repo, there look to be lots of different conventions other people have used for this sort of thing. I could try unifying them all if that would be helpful.
I'm not sure if there was a better existing way to do this but I wrote my own script to help me run all the doctests and wade through the output. If that would be useful to anyone else, I put it here: https://github.com/Elliot-Roberts/rust_doctest_fixing_tool
Overhaul `MacArgs`
Motivation:
- Clarify some code that I found hard to understand.
- Eliminate one use of three places where `TokenKind::Interpolated` values are created.
r? `@petrochenkov`
The value in `MacArgs::Eq` is currently represented as a `Token`.
Because of `TokenKind::Interpolated`, `Token` can be either a token or
an arbitrary AST fragment. In practice, a `MacArgs::Eq` starts out as a
literal or macro call AST fragment, and then is later lowered to a
literal token. But this is very non-obvious. `Token` is a much more
general type than what is needed.
This commit restricts things, by introducing a new type `MacArgsEqKind`
that is either an AST expression (pre-lowering) or an AST literal
(post-lowering). The downside is that the code is a bit more verbose in
a few places. The benefit is that makes it much clearer what the
possibilities are (though also shorter in some other places). Also, it
removes one use of `TokenKind::Interpolated`, taking us a step closer to
removing that variant, which will let us make `Token` impl `Copy` and
remove many "handle Interpolated" code paths in the parser.
Things to note:
- Error messages have improved. Messages like this:
```
unexpected token: `"bug" + "found"`
```
now say "unexpected expression", which makes more sense. Although
arbitrary expressions can exist within tokens thanks to
`TokenKind::Interpolated`, that's not obvious to anyone who doesn't
know compiler internals.
- In `parse_mac_args_common`, we no longer need to collect tokens for
the value expression.
Using an obviously-placeholder syntax. An RFC would still be needed before this could have any chance at stabilization, and it might be removed at any point.
But I'd really like to have it in nightly at least to ensure it works well with try_trait_v2, especially as we refactor the traits.
`make_tokenstream` has three commented hacks, and a comment at the top
referring to #67062. These hacks have no observable effect, at least as judged
by running the test suite. The hacks were added in #82608, with an explanation
[here](https://github.com/rust-lang/rust/pull/82608#issuecomment-812877329). It
appears that one of the following is true: (a) they never did anything useful,
(b) they do something useful but we have no test coverage for them, or (c)
something has changed in the meantime that means they are no longer necessary.
This commit removes the hacks and the comments, in the hope that (b) is not
true.
Change `span_suggestion` (and variants) to take `impl ToString` rather
than `String` for the suggested code, as this simplifies the
requirements on the diagnostic derive.
Signed-off-by: David Wood <david.wood@huawei.com>
rustc_ast: Harmonize delimiter naming with `proc_macro::Delimiter`
Compiler cannot reuse `proc_macro::Delimiter` directly due to extra impls, but can at least use the same naming.
After this PR the only difference between these two enums is that `proc_macro::Delimiter::None` is turned into `token::Delimiter::Invisible`.
It's my mistake that the invisible delimiter is called `None` on stable, during the stabilization I audited the naming and wrote the docs, but missed the fact that the `None` naming gives a wrong and confusing impression about what this thing is.
cc https://github.com/rust-lang/rust/pull/96421
r? ``@nnethercote``
Less `NoDelim`
Currently there are several places where `NoDelim` (which really means "implicit delimiter" or "invisible delimiter") is used to mean "no delimiter". The name `NoDelim` is a bit misleading, and may be a cause.
This PR changes these places, e.g. by changing a `DelimToken` to `Option<DelimToken>` and then using `None` to mean "no delimiter". As a result, the *only* place where `NoDelim` values are now produced is within:
- `Delimiter::to_internal()`, when converting from `Delimiter::None`.
- `FlattenNonterminals::process_token()`, when converting `TokenKind::Interpolated`.
r? ````@petrochenkov````
This lets us clone just the parts within a `TokenTree` that need
cloning, rather than the entire thing. This is a surprisingly large
performance win, up to 4% on `async-std-1.10.0`.
This makes `CloseDelim` handling more like `OpenDelim` handling, which
produces `OpenDelim` and pushes the stack at the same time. It requires
some adjustment to `parse_token_tree` now that we don't remain within
the frame after getting the `CloseDelim`.
A Google search of the error message fails to return any relevant
resuts, suggesting this has never occurred in practice. And removeing it
reduces instruction counts by up to 2% on some benchmarks.
The loop is there to handle a `NoDelim` open/close token. This commit
changes `TokenCursor::inlined_next` so it never returns such a token.
This is a performance win because the conditional test in `bump()` is
removed.
If the parser needs changing in the future to handle `NoDelim` tokens,
then `inlined_next()` can easily be changed to return them.
The `DelimToken` here is `NoDelim`, which means the returned delim
tokens will just be ignored by `Parser::bump()`. This commit changes
things so the delim tokens won't be returned.
This will facilitate the change in the next commit.
`boolean` arguments aren't great, but the function is only used in three
places within this one file.
In particular, avoid wrapping a token within `TokenTree::Token` and then
immediately matching it and returning the token within. Just return the
token immediately.
Parse inner attributes on inline const block
According to https://github.com/rust-lang/rust/pull/84414#issuecomment-826150936, inner attributes are intended to be supported *"in all containers for statements (or some subset of statements)"*.
This PR adds inner attribute parsing and pretty-printing for inline const blocks (https://github.com/rust-lang/rust/issues/76001), which contain statements just like an unsafe block or a loop body.
```rust
let _ = const {
#![allow(...)]
let x = ();
x
};
```
Improve diagnostics for unterminated nested block comment
close#95283
(This is my first time try to messing around with rust compiler and might get a lot of things wrong... 🙇 )
By heap allocating the argument within `NtPath`, `NtVis`, and `NtStmt`.
This slightly reduces cumulative and peak allocation amounts, most
notably on `deep-vector`.
This commit updates the signatures of all diagnostic functions to accept
types that can be converted into a `DiagnosticMessage`. This enables
existing diagnostic calls to continue to work as before and Fluent
identifiers to be provided. The `SessionDiagnostic` derive just
generates normal diagnostic calls, so these APIs had to be modified to
accept Fluent identifiers.
In addition, loading of the "fallback" Fluent bundle, which contains the
built-in English messages, has been implemented.
Each diagnostic now has "arguments" which correspond to variables in the
Fluent messages (necessary to render a Fluent message) but no API for
adding arguments has been added yet. Therefore, diagnostics (that do not
require interpolation) can be converted to use Fluent identifiers and
will be output as before.
`MultiSpan` contains labels, which are more complicated with the
introduction of diagnostic translation and will use types from
`rustc_errors` - however, `rustc_errors` depends on `rustc_span` so
`rustc_span` cannot use types like `DiagnosticMessage` without
dependency cycles. Introduce a new `rustc_error_messages` crate that can
contain `DiagnosticMessage` and `MultiSpan`.
Signed-off-by: David Wood <david.wood@huawei.com>
Introduce a `DiagnosticMessage` type that will enable diagnostic
messages to be simple strings or Fluent identifiers.
`DiagnosticMessage` is now used in the implementation of the standard
`DiagnosticBuilder` APIs.
Signed-off-by: David Wood <david.wood@huawei.com>
Suggest `i += 1` when we see `i++` or `++i`
Closes#83502 (for `i++` and `++i`; `--i` should be covered by #82987, and `i--`
is tricky to handle).
This is a continuation of #83536.
r? `@estebank`
Fix multiline attributes handling in doctests
Fixes#55713.
I needed to have access to the `unclosed_delims` field in order to check that the attribute was completely parsed and didn't have missing parts, so I created a getter for it.
r? `@notriddle`
Spellchecking compiler comments
This PR cleans up the rest of the spelling mistakes in the compiler comments. This PR does not change any literal or code spelling issues.
Remove `Nonterminal::NtTT`.
It's only needed for macro expansion, not as a general element in the
AST. This commit removes it, adds `NtOrTt` for the parser and macro
expansion cases, and renames the variants in `NamedMatch` to better
match the new type.
r? `@petrochenkov`
It's only needed for macro expansion, not as a general element in the
AST. This commit removes it, adds `NtOrTt` for the parser and macro
expansion cases, and renames the variants in `NamedMatch` to better
match the new type.
Provide suggestion for missing `>` in a type parameter list
When encountering an inproperly terminated type parameter list, provide
a suggestion to close it after the last non-constraint type parameter
that was successfully parsed.
Fix#94058.
When encountering an inproperly terminated type parameter list, provide
a suggestion to close it after the last non-constraint type parameter
that was successfully parsed.
Fix#94058.
Remove `Session::one_time_diagnostic`
This is untracked mutable state, which modified the behaviour of queries.
It was used for 2 things: some full-blown errors, but mostly for lint declaration notes ("the lint level is defined here" notes).
It is replaced by the diagnostic deduplication infra which already exists in the diagnostic emitter.
A new diagnostic level `OnceNote` is introduced specifically for lint notes, to deduplicate subdiagnostics.
As a drive-by, diagnostic emission takes a `&mut` to allow dropping the `SubDiagnostic`s.
`run-rustfix` applies all suggestions regardless of their Applicability.
There's a flag, `rustfix-only-machine-applicable`, that does what it
says, but then the produced `.fixed` file would have invalid code from
the suggestions that weren't applied. So, I moved the cases of postfix
increment, in which case multiple suggestions are given, to the
`-notfixed` test, which does not run rustfix.
I also changed the Applicability to Unspecified since MaybeIncorrect
requires that the code be valid, even if it's incorrect.
Inline some parser functions
Some crates that do a lot of complex declarative macro expansion spend a lot of time parsing (and reparsing) tokens. These commits inline some functions for some minor speed wins.
r? `@ghost`
The call site within `Parser::bump` is hot.
Also add an inline annotation to `Parser::next_tok`. It was already
being inlined by the compiler; this just makes sure that continues.
suggest removing type ascription in bad parsing position
Not sure how to test this with the non-nightly suggestion. Didn't add a new UI test because it already manifests in an existing UI test.
Fixes#95014
Make ErrorReported impossible to construct outside `rustc_errors`
There are a few places were we have to construct it, though, and a few
places that are more invasive to change. To do this, we create a
constructor with a long obvious name.
cc #69426 `@varkor` `@eddyb` `@estebank`
I actually didn't see that I was assigned to this issue until now...
There are a few places were we have to construct it, though, and a few
places that are more invasive to change. To do this, we create a
constructor with a long obvious name.
More robust fallback for `use` suggestion
Our old way to suggest where to add `use`s would first look for pre-existing `use`s in the relevant crate/module, and if there are *no* uses, it would fallback on trying to use another item as the basis for the suggestion.
But this was fragile, as illustrated in issue #87613
This PR instead identifies span of the first token after any inner attributes, and uses *that* as the fallback for the `use` suggestion.
Fix#87613
then we just suggest the first legal position where you could inject a use.
To do this, I added `inject_use_span` field to `ModSpans`, and populate it in
parser (it is the span of the first token found after inner attributes, if any).
Then I rewrote the use-suggestion code to utilize it, and threw out some stuff
that is now unnecessary with this in place. (I think the result is easier to
understand.)
Then I added a test of issue 87613.
* Recover from invalid `'label: ` before block.
* Make suggestion to enclose statements in a block multipart.
* Point at `match`, `while`, `loop` and `unsafe` keywords when failing
to parse their expression.
* Do not suggest `{ ; }`.
* Do not suggest `|` when very unlikely to be what was wanted (in `let`
statements).
Adopt let else in more places
Continuation of #89933, #91018, #91481, #93046, #93590, #94011.
I have extended my clippy lint to also recognize tuple passing and match statements. The diff caused by fixing it is way above 1 thousand lines. Thus, I split it up into multiple pull requests to make reviewing easier. This is the biggest of these PRs and handles the changes outside of rustdoc, rustc_typeck, rustc_const_eval, rustc_trait_selection, which were handled in PRs #94139, #94142, #94143, #94144.
i'd guess about 70% of "bad escape" cases occur when someone meant to
use a raw string literal because they're passing it directly to
Regex::new(). this emits an advisory (Applicability::MaybeIncorrect)
help: suggestion to the user that they use an r"" string,
on top of the normal notes about looking at the
string literal documentation/spec.
fix ICE when parsing lifetime as function argument
I don't really like this, but we basically need to emit an error instead of just delaying an bug, because there are too many places in the AST that aren't covered by my previous PRs...
cc: https://github.com/rust-lang/rust/issues/93282#issuecomment-1028052945
If an integer is entered with an upper-case base prefix (0Xbeef, 0O755, 0B1010), suggest to make it lowercase
The current error for this case isn't really great, it just complains about the whole thing past the `0` being an invalid suffix.
Incorporate distance limit from `find_best_match_for_name` directly into
Levenshtein distance computation.
Use the string size difference as a lower bound on the distance and exit
early when it exceeds the specified limit.
After finding a candidate within a limit, lower the limit further to
restrict the search space.
Let qpath contain NtTy: `<$:ty as $:ty>::…`
Example:
```rust
macro_rules! m {
(<$type:ty as $trait:ty>::$name:ident) => {
<$type as $trait>::$name
};
}
fn main() {
let _: m!(<str as ToOwned>::Owned);
}
```
Previous behavior:
```console
error: expected identifier, found `ToOwned`
--> src/main.rs:3:19
|
3 | <$type as $trait>::$name
| ^^^^^^ expected identifier
...
8 | let _: m!(<str as ToOwned>::Owned);
| ---------------------------
| |
| this macro call doesn't expand to a type
| in this macro invocation
```
The <code>expected identifier, found \`ToOwned\`</code> error is particularly silly. I think it should be fine to accept this code as long as $trait is of the form `TyKind::Path(None, path)`; if it is any other kind of `NtTy`, we'll keep the same behavior as before.
ProjectionPredicate should be able to handle both associated types and consts so this adds the
first step of that. It mainly just pipes types all the way down, not entirely sure how to handle
consts, but hopefully that'll come with time.
Fix suggesting turbofish with lifetime arguments
Now we suggest turbofish correctly given exprs like `foo<'_>`.
Also fix suggestion when we have `let x = foo<bar, baz>;` which was broken.
Parse `Ty?` as `Option<Ty>` and provide structured suggestion
Swift has specific syntax that desugars to `Option<T>` similar to our
`?` operator, which means that people might try to use it in Rust. Parse
it and gracefully recover.
Swift has specific syntax that desugars to `Option<T>` similar to our
`?` operator, which means that people might try to use it in Rust. Parse
it and gracefully recover.
Remove `SymbolStr`
This was originally proposed in https://github.com/rust-lang/rust/pull/74554#discussion_r466203544. As well as removing the icky `SymbolStr` type, it allows the removal of a lot of `&` and `*` occurrences.
Best reviewed one commit at a time.
r? `@oli-obk`
Fix suggestion of additional `pub` when using `pub pub fn ...`
Fix#87694.
Marked as draft to start with because I want to explore doing the same fix for `const const fn` and other repeated-but-valid keywords.
`@rustbot` label A-diagnostics D-invalid-suggestion T-compiler
By changing `as_str()` to take `&self` instead of `self`, we can just
return `&str`. We're still lying about lifetimes, but it's a smaller lie
than before, where `SymbolStr` contained a (fake) `&'static str`!
Recover on invalid operators `<>` and `<=>`
Thanks to #89871 for showing me how to do this.
Next, I think it'd be nice to recover on `<=>` too, like #89871 intended, if this even works.
Stabilise `feature(const_generics_defaults)`
`feature(const_generics_defaults)` is complete implementation wise and has a pretty extensive test suite so I think is ready for stabilisation.
needs stabilisation report and maybe an RFC 😅
r? `@lcnr`
cc `@rust-lang/project-const-generics`
Do not add `;` to expected tokens list when it's wrong
There's a few spots where semicolons are checked for to do error recovery, and should not be suggested (or checked for other stuff).
Fixes#87647
Also add a test case for inserting a semicolon on extern fns.
Without this fix, we got an error like this:
error: expected one of `->`, `where`, or `{`, found `}`
--> chk.rs:3:1
|
2 | fn foo()
| --- - expected one of `->`, `where`, or `{`
| |
| while parsing this `fn`
3 | }
| ^ unexpected token
Since this is inside an extern block, you're required to write function
prototypes with no body. This fixes a regression, and adds a test case
for it.
Improve diagnostic for missing half of binary operator in `if` condition
Fixes#91421. I've also changed it so that it doesn't consume the `else` token in the error case, because it will try to consume it again afterwards, leading to this incorrect error message (where the `else` reported as missing is actually there):
```
error: expected one of `.`, `;`, `?`, `else`, or an operator, found `{`
--> src/main.rs:4:12
|
4 | } else { 4 };
| ^ expected one of `.`, `;`, `?`, `else`, or an operator
```
r? `@lcnr`
expand: Turn `ast::Crate` into a first class expansion target
And stop creating a fake `mod` item for the crate root when expanding a crate, thus addressing FIXMEs left in https://github.com/rust-lang/rust/pull/82238, and making a step towards a proper support for crate-level macro attributes (cc #54726).
I haven't added token collection support for the whole crate in this PR, maybe later.
r? `@Aaron1011`
Tokenize emoji as if they were valid identifiers
In the lexer, consider emojis to be valid identifiers and reject
them later to avoid knock down parse errors.
Partially address #86102.
fix(doctest): detect extern crate items in statement doctests
This partially reverts #91026, because rustdoc needs to detect the extern statements, even when they appear inside implicit `main()`. It does not entirely revert it, so the old bug is still fixed, by duplicating some of the logic from `parse_mod` instead of trying to use it directly.
Fixes#91134
This partially reverts #91026, because rustdoc needs to detect the extern statements,
even when they appear inside implicit `main()`. It does not entirely revert it,
so the old bug is still fixed, by duplicating some of the logic from `parse_mod`
instead of trying to use it directly.
Fixes#91134
TraitKind -> Trait
TyAliasKind -> TyAlias
ImplKind -> Impl
FnKind -> Fn
All `*Kind`s in AST are supposed to be enums.
Tuple structs are converted to braced structs for the types above, and fields are reordered in syntactic order.
Also, mutable AST visitor now correctly visit spans in defaultness, unsafety, impl polarity and constness.
rustc_span: `Ident::invalid` -> `Ident::empty`
The equivalent for `Symbol`s was renamed some time ago (`kw::Invalid` -> `kw::Empty`), and it makes sense to do the same thing for `Ident`s as well.
Nicer error message if the user attempts to do let...else if
Gives a nice "conditional `else if` is not supported for `let...else`" error when encountering a `let...else if` pattern, as suggested in the [let...else tracking issue](https://github.com/rust-lang/rust/issues/87335#issuecomment-944846205).
"Fix" an overflow in byte position math
r? `@estebank`
help! I fixed the ICE only to brick the diagnostic.
I mean, it was wrong previously (using an already expanded macro span), but it is really bad now XD
Rollup of 12 pull requests
Successful merges:
- #88795 (Print a note if a character literal contains a variation selector)
- #89015 (core::ascii::escape_default: reduce struct size)
- #89078 (Cleanup: Remove needless reference in ParentHirIterator)
- #89086 (Stabilize `Iterator::map_while`)
- #89096 ([bootstrap] Improve the error message when `ninja` is not found to link to installation instructions)
- #89113 (dont `.ensure()` the `thir_abstract_const` query call in `mir_build`)
- #89114 (Fixes a technicality regarding the size of C's `char` type)
- #89115 (⬆️ rust-analyzer)
- #89126 (Fix ICE when `indirect_structural_match` is allowed)
- #89141 (Impl `Error` for `FromSecsError` without foreign type)
- #89142 (Fix match for placeholder region)
- #89147 (add case for checking const refs in check_const_value_eq)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Migrate in-tree crates to 2021
This replaces #89075 (cherry picking some of the commits from there), and closes#88637 and fixes#89074.
It excludes a migration of the library crates for now (see tidy diff) because we have some pending bugs around macro spans to fix there.
I instrumented bootstrap during the migration to make sure all crates moved from 2018 to 2021 had the compatibility warnings applied first.
Originally, the intent was to support cargo fix --edition within bootstrap, but this proved fairly difficult to pull off. We'd need to architect the check functionality to support running cargo check and cargo fix within the same x.py invocation, and only resetting sysroots on check. Further, it was found that cargo fix doesn't behave too well with "not quite workspaces", such as Clippy which has several crates. Bootstrap runs with --manifest-path ... for all the tools, and this makes cargo fix only attempt migration for that crate. We can't use e.g. --workspace due to needing to maintain sysroots for different phases of compilation appropriately.
It is recommended to skip the mass migration of Cargo.toml's to 2021 for review purposes; you can also use `git diff d6cd2c6c87 -I'^edition = .20...$'` to ignore the edition = 2018/21 lines in the diff.
Newcomers may write `{1, 2, 3}` for making arrays, and the current error
message is not informative enough to quickly convince them what is
needed to fix the error.
This PR implements a diagnostic for this case, and its output looks like
this:
```text
error: this code is interpreted as a block expression, not an array
--> src/lib.rs:1:22
|
1 | const FOO: [u8; 3] = {
| ______________________^
2 | | 1, 2, 3
3 | | };
| |_^
|
= note: to define an array, one would use square brackets instead of curly braces
help: try using [] instead of {}
|
1 | const FOO: [u8; 3] = [
2 | 1, 2, 3
3 | ];
|
```
Fix#87672
Recover from `Foo(a: 1, b: 2)`
Detect likely `struct` literal using parentheses as delimiters and emit
targeted suggestion instead of type ascription parse error.
Fix#61326.
Revert anon union parsing
Revert PR #84571 and #85515, which implemented anonymous union parsing in a manner that broke the context-sensitivity for the `union` keyword and thus broke stable Rust code.
Fix#88583.
Accept `m!{ .. }.method()` and `m!{ .. }?` statements.
This PR fixes something that I keep running into when using `quote!{}.into()` in a proc macro to convert the `proc_macro2::TokenStream` to a `proc_macro::TokenStream`:
Before:
```
error: expected expression, found `.`
--> src/lib.rs:6:6
|
4 | quote! {
5 | ...
6 | }.into()
| ^ expected expression
```
After:
```
```
(No output, compiles fine.)
---
Context:
For expressions like `{ 1 }` and `if true { 1 } else { 2 }`, we accept them as full statements without a trailing `;`, which means the following is not accepted:
```rust
{ 1 } - 1 // error
```
since that is parsed as two statements: `{ 1 }` and `-1`. Syntactically correct, but the type of `{ 1 }` should be `()` as there is no `;`.
However, for specifically `.` and `?` after the `}`, we do [continue parsing it as an expression](13db8440bb/compiler/rustc_parse/src/parser/expr.rs (L864-L876)):
```rust
{ "abc" }.len(); // ok
```
For braced macro invocations, we do not do this:
```rust
vec![1, 2, 3].len(); // ok
vec!{1, 2, 3}.len(); // error
```
(It parses `vec!{1, 2, 3}` as a full statement, and then complains about `.len()` not being a valid expression.)
This PR changes this to also look for a `.` and `?` after a braced macro invocation. We can be sure the macro is an expression and not a full statement in those cases, since no statement can start with a `.` or `?`.
Use smaller spans for some structured suggestions
Use more accurate suggestion spans for
* argument parse error
* fully qualified path
* missing code block type
* numeric casts
Encode spans relative to the enclosing item
The aim of this PR is to avoid recomputing queries when code is moved without modification.
MCP at https://github.com/rust-lang/compiler-team/issues/443
This is achieved by :
1. storing the HIR owner LocalDefId information inside the span;
2. encoding and decoding spans relative to the enclosing item in the incremental on-disk cache;
3. marking a dependency to the `source_span(LocalDefId)` query when we translate a span from the short (`Span`) representation to its explicit (`SpanData`) representation.
Since all client code uses `Span`, step 3 ensures that all manipulations
of span byte positions actually create the dependency edge between
the caller and the `source_span(LocalDefId)`.
This query return the actual absolute span of the parent item.
As a consequence, any source code motion that changes the absolute byte position of a node will either:
- modify the distance to the parent's beginning, so change the relative span's hash;
- dirty `source_span`, and trigger the incremental recomputation of all code that
depends on the span's absolute byte position.
With this scheme, I believe the dependency tracking to be accurate.
For the moment, the spans are marked during lowering.
I'd rather do this during def-collection,
but the AST MutVisitor is not practical enough just yet.
The only difference is that we attach macro-expanded spans
to their expansion point instead of the macro itself.
Change more x64 size checks to not apply to x32.
Commit 95e096d6 changed a bunch of size checks already, but more have
been added, so this fixes the new ones the same way: the various size
checks that are conditional on target_arch = "x86_64" were not intended
to apply to x86_64-unknown-linux-gnux32, so add
target_pointer_width = "64" to the conditions.
This commit focuses on emitting clean errors for the following syntax
error:
```
Some(42).map(|a|
dbg!(a);
a
);
```
Previous implementation tried to recover after parsing the closure body
(the `dbg` expression) by replacing the next `;` with a `,`, which made
the next expression belong to the next function argument. As such, the
following errors were emitted (among others):
- the semicolon token was not expected,
- a is not in scope,
- Option::map is supposed to take one argument, not two.
This commit allows us to gracefully handle this situation by adding
giving the parser the ability to remember when it has just parsed a
closure body inside a function call. When this happens, we can treat the
unexpected `;` specifically and try to parse as much statements as
possible in order to eat the whole block. When we can't parse statements
anymore, we generate a clean error indicating that the braces are
missing, and return an ExprKind::Err.
This reverts commit 059b68dd67.
Note that this was manually adjusted to retain some of the refactoring
introduced by commit 059b68dd67, so that it could
likewise retain the correction introduced in commit
5b4bc05fa5
Improve diagnostics for unary plus operators (#88276)
This pull request improves the diagnostics emitted on parsing a unary plus operator. See #88276.
Before:
```
error: expected expression, found `+`
--> src/main.rs:2:13
|
2 | let x = +1;
| ^ expected expression
```
After:
```
error: leading `+` is not supported
--> main.rs:2:13
|
2 | let x = +1;
| ^
| |
| unexpected `+`
| help: try removing the `+`
```
Commit 95e096d6 changed a bunch of size checks already, but more have
been added, so this fixes the new ones the same way: the various size
checks that are conditional on target_arch = "x86_64" were not intended
to apply to x86_64-unknown-linux-gnux32, so add
target_pointer_width = "64" to the conditions.
Detect bare blocks with type ascription that were meant to be a `struct` literal
Address part of #34255.
Potential improvement: silence the other knock down errors in `issue-34255-1.rs`.
Point at unclosed delimiters as part of the primary MultiSpan
Both the place where the parser encounters a needed closed delimiter and
the unclosed opening delimiter are important, so they should get the
same level of highlighting in the output.
_Context: https://twitter.com/mwk4/status/1430631546432675840_
Path remapping: Make behavior of diagnostics output dependent on presence of --remap-path-prefix.
This PR fixes a regression (#87745) with `--remap-path-prefix` where the flag stopped causing diagnostic messages to be remapped as well. The regression was introduced in https://github.com/rust-lang/rust/pull/83813 where we erroneously assumed that remapping of diagnostic messages was not desired anymore (because #70642 partially undid that functionality with nobody objecting).
The issue is fixed by making `--remap-path-prefix` remap diagnostic messages again, including for paths that have been remapped in upstream crates (e.g. the standard library). This means that "sysroot-localization" (implemented in #70642) is also disabled if `rustc` is invoked with `--remap-path-prefix`. The assumption is that once someone starts explicitly remapping paths they also don't want paths to their local Rust installation in their build output.
In the future we might want to give more fine-grained control over this behavior via compiler flags (see https://github.com/rust-lang/rfcs/pull/3127 for a related RFC). For now this PR is intended as a regression fix.
This PR is an alternative to https://github.com/rust-lang/rust/pull/88191, which makes diagnostic messages be remapped unconditionally. That approach, however, would effectively revert #70642.
Fixes https://github.com/rust-lang/rust/issues/87745.
cc `@cbeuw`
r? `@ghost`
Introduce `let...else`
Tracking issue: #87335
The trickiest part for me was enforcing the diverging else block with clear diagnostics. Perhaps the obvious solution is to expand to `let _: ! = ..`, but I decided against this because, when a "mismatched type" error is found in typeck, there is no way to trace where in the HIR the expected type originated, AFAICT. In order to pass down this information, I believe we should introduce `Expectation::LetElseNever(HirId)` or maybe add `HirId` to `Expectation::HasType`, but I left that as a future enhancement. For now, I simply assert that the block is `!` with a custom `ObligationCauseCode`, and I think this is clear enough, at least to start. The downside here is that the error points at the entire block rather than the specific expression with the wrong type. I left a todo to this effect.
Overall, I believe this PR is feature-complete with regard to the RFC.
Old error output:
3 | let _: usize = $f;
| ----- ^ expected `usize`, found struct `Baz`
| |
| expected due to this
New error output:
3 | let _: usize = $f;
| ----- ^^ expected `usize`, found struct `Baz`
| |
| expected due to this
Old error output:
= note: this warning originates in the macro `foo` (in Nightly builds, run with -Z macro-backtrace for more info)
help: wrap this expression in parentheses
|
4 | break '_l $f(;)
| ^ ^
New error output:
= note: this warning originates in the macro `foo` (in Nightly builds, run with -Z macro-backtrace for more info)
help: wrap this expression in parentheses
|
4 | break '_l ($f);
| ^ ^
Both the place where the parser encounters a needed closed delimiter and
the unclosed opening delimiter are important, so they should get the
same level of highlighting in the output.
- [x] Removed `?const` and change uses of `?const`
- [x] Added `~const` to the AST. It is gated behind const_trait_impl.
- [x] Validate `~const` in ast_validation.
- [ ] Add enum `BoundConstness` to the HIR. (With variants `NotConst` and
`ConstIfConst` allowing future extensions)
- [ ] Adjust trait selection and pre-existing code to use `BoundConstness`.
- [ ] Optional steps (*for this PR, obviously*)
- [ ] Fix#88155
- [ ] Do something with constness bounds in chalk
Remove `Session.used_attrs` and move logic to `CheckAttrVisitor`
Instead of updating global state to mark attributes as used,
we now explicitly emit a warning when an attribute is used in
an unsupported position. As a side effect, we are to emit more
detailed warning messages (instead of just a generic "unused" message).
`Session.check_name` is removed, since its only purpose was to mark
the attribute as used. All of the callers are modified to use
`Attribute.has_name`
Additionally, `AttributeType::AssumedUsed` is removed - an 'assumed
used' attribute is implemented by simply not performing any checks
in `CheckAttrVisitor` for a particular attribute.
We no longer emit unused attribute warnings for the `#[rustc_dummy]`
attribute - it's an internal attribute used for tests, so it doesn't
mark sense to treat it as 'unused'.
With this commit, a large source of global untracked state is removed.
Instead of updating global state to mark attributes as used,
we now explicitly emit a warning when an attribute is used in
an unsupported position. As a side effect, we are to emit more
detailed warning messages (instead of just a generic "unused" message).
`Session.check_name` is removed, since its only purpose was to mark
the attribute as used. All of the callers are modified to use
`Attribute.has_name`
Additionally, `AttributeType::AssumedUsed` is removed - an 'assumed
used' attribute is implemented by simply not performing any checks
in `CheckAttrVisitor` for a particular attribute.
We no longer emit unused attribute warnings for the `#[rustc_dummy]`
attribute - it's an internal attribute used for tests, so it doesn't
mark sense to treat it as 'unused'.
With this commit, a large source of global untracked state is removed.
Allow labeled loops as value expressions for `break`
Fixes#86948. This is currently allowed:
```rust
return 'label: loop { break 'label 42; };
break ('label: loop { break 'label 42; });
break 1 + 'label: loop { break 'label 42; };
break 'outer 'inner: loop { break 'inner 42; };
```
But not this:
```rust
break 'label: loop { break 'label 42; };
```
I have fixed this, so that the above now parses as an unlabeled break with a labeled loop as its value expression.
Fix a parser ICE on invalid `fn` body
Fixes#87635
A better fix would add a check for `fn` body on `expected_one_of_not_found` but I haven't come up with a graceful way. Any idea?
r? ```@oli-obk``` ```@estebank```
After this commit, `unsafe async fn ...` now suggests the `async unsafe` fix
instead of misunderstanding the issue.
This is not perfect for repeated keywords (`const async const`) and for
keywords that are misplaced after `extern "some abi"` because of the way
`check_fn_font_matter` works, but changing it breaks so many tests and
diagnostics it has been judged too high a cost for this PR.
rfc3052 followup: Remove authors field from Cargo manifests
Since RFC 3052 soft deprecated the authors field, hiding it from
crates.io, docs.rs, and making Cargo not add it by default, and it is
not generally up to date/useful information for contributors, we may as well
remove it from crates in this repo.
Suggest `br` if the unknown string prefix `rb` is found
Currently, for the following code:
```rust
fn main() {
rb"abc";
}
```
we issue the following suggestion:
```
help: consider inserting whitespace here
|
2 | rb "abc";
| --
```
With my changes (only in edition 2021, where unknown prefixes became an error), I get:
```
help: use `br` for a raw byte string
|
2 | br"abc";
| ^^
```
Since RFC 3052 soft deprecated the authors field anyway, hiding it from
crates.io, docs.rs, and making Cargo not add it by default, and it is
not generally up to date/useful information, we should remove it from
crates in this repo.
Add diagnostics for mistyped inclusive range
Inclusive ranges are correctly typed as `..=`. However, it's quite easy to think of it as being like `==`, and type `..==` instead. This PR adds helpful diagnostics for this case.
Resolves#86395 (there are some other cases there, but I think those should probably have separate issues).
r? `@estebank`
Stabilize "RangeFrom" patterns in 1.55
Implements a partial stabilization of #67264 and #37854.
Reference PR: https://github.com/rust-lang/reference/pull/900
# Stabilization Report
This stabilizes the `X..` pattern, shown as such, offering an exhaustive match for unsigned integers:
```rust
match x as u32 {
0 => println!("zero!"),
1.. => println!("positive number!"),
}
```
Currently if a Rust author wants to write such a match on an integer, they must use `1..={integer}::MAX` . By allowing a "RangeFrom" style pattern, this simplifies the match to not require the MAX path and thus not require specifically repeating the type inside the match, allowing for easier refactoring. This is particularly useful for instances like the above case, where different behavior on "0" vs. "1 or any positive number" is desired, and the actual MAX is unimportant.
Notably, this excepts slice patterns which include half-open ranges from stabilization, as the wisdom of those is still subject to some debate.
## Practical Applications
Instances of this specific usage have appeared in the compiler:
16143d1067/compiler/rustc_middle/src/ty/inhabitedness/mod.rs (L219)673d0db5e3/compiler/rustc_ty_utils/src/ty.rs (L524)
And I have noticed there are also a handful of "in the wild" users who have deployed it to similar effect, especially in the case of rejecting any value of a certain number or greater. It simply makes it much more ergonomic to write an irrefutable match, as done in Katholieke Universiteit Leuven's [SCALE and MAMBA project](05e5db00d5/WebAssembly/scale_std/src/fixed_point.rs (L685-L695)).
## Tests
There were already many tests in [src/test/ui/half-open-range/patterns](90a2e5e3fe/src/test/ui/half-open-range-patterns), as well as [generic pattern tests that test the `exclusive_range_pattern` feature](673d0db5e3/src/test/ui/pattern/usefulness/integer-ranges/reachability.rs), many dating back to the feature's introduction and remaining standing to this day. However, this stabilization comes with some additional tests to explore the... sometimes interesting behavior of interactions with other patterns. e.g. There is, at least, a mild diagnostic improvement in some edge cases, because before now, the pattern `0..=(5+1)` encounters the `half_open_range_patterns` feature gate and can thus emit the request to enable the feature flag, while also emitting the "inclusive range with no end" diagnostic. There is no intent to allow an `X..=` pattern that I am aware of, so removing the flag request is a strict improvement. The arrival of the `J | K` "or" pattern also enables some odd formations.
Some of the behavior tested for here is derived from experiments in this [Playground](https://play.rust-lang.org/?version=nightly&mode=debug&edition=2018&gist=58777b3c715c85165ac4a70d93efeefc) example, linked at https://github.com/rust-lang/rust/issues/67264#issuecomment-812770692, which may be useful to reference to observe the current behavior more closely.
In addition tests constituting an explanation of the "slicing range patterns" syntax issue are included in this PR.
## Desiderata
The exclusive range patterns and half-open range patterns are fairly strongly requested by many authors, as they make some patterns much more natural to write, but there is disagreement regarding the "closed" exclusive range pattern or the "RangeTo" pattern, especially where it creates "off by one" gaps in the presence of a "catch-all" wildcard case. Also, there are obviously no range analyses in place that will force diagnostics for e.g. highly overlapping matches. I believe these should be warned on, ideally, and I think it would be reasonable to consider such a blocker to stabilizing this feature, but there is no technical issue with the feature as-is from the purely syntactic perspective as such overlapping or missed matches can already be generated today with such a catch-all case. And part of the "point" of the feature, at least from my view, is to make it easier to omit wildcard matches: a pattern with such an "open" match produces an irrefutable match and does not need the wild card case, making it easier to benefit from exhaustiveness checking.
## History
- Implemented:
- Partially via exclusive ranges: https://github.com/rust-lang/rust/pull/35712
- Fully with half-open ranges: https://github.com/rust-lang/rust/pull/67258
- Unresolved Questions:
- The precedence concerns of https://github.com/rust-lang/rust/pull/48501 were considered as likely requiring adjustment but probably wanting a uniform consistent change across all pattern styles, given https://github.com/rust-lang/rust/issues/67264#issuecomment-720711656, but it is still unknown what changes might be desired
- How we want to handle slice patterns in ranges seems to be an open question still, as witnessed in the discussion of this PR!
I checked but I couldn't actually find an RFC for this, and given "approved provisionally by lang team without an RFC", I believe this might require an RFC before it can land? Unsure of procedure here, on account of this being stabilizing a subset of a feature of syntax.
r? `@scottmcm`
Fix ICE when misplaced visibility cannot be properly parsed
Fixes#86895
The issue was that a failure to parse the visibility was causing the original error to be dropped before being emitted.
The resulting error isn't quite as nice as when the visibility is parsed properly, but I'm not sure which error to prioritize here. Displaying both errors might be too confusing.
r? ```@estebank```
Recover from `&dyn mut ...` parse errors
Consider this example:
```rust
fn main() {
let r: &dyn mut Trait;
}
```
This currently leads to:
```
error: expected one of `!`, `(`, `;`, `=`, `?`, `for`, lifetime, or path, found keyword `mut`
--> src/main.rs:2:17
|
2 | let r: &dyn mut Trait;
| ^^^ expected one of 8 possible tokens
error: aborting due to previous error
```
However, especially for beginners, I think it is easy to get `&dyn mut` and `&mut dyn` confused. With my changes, I get a help message, and the parser even recovers:
```
error: `mut` must precede `dyn`
--> test.rs:2:12
|
2 | let r: &dyn mut Trait;
| ^^^^^^^^ help: place `mut` before `dyn`: `&mut dyn`
error[E0405]: cannot find trait `Trait` in this scope
--> test.rs:2:21
|
2 | let r: &dyn mut Trait;
| ^^^^^ not found in this scope
error: aborting due to 2 previous errors
```
Remove unused dependencies from compiler crates
Various compiler crates have dependencies that they don't appear to use. I used some scripting to detect such dependencies, filtered them based on some manual review, and removed those that do indeed appear to be entirely unused.
Use HTTPS links where possible
While looking at #86583, I wondered how many other (insecure) HTTP links were in `rustc`. This changes most other `http` links to `https`. While most of the links are in comments or documentation, there are a few other HTTP links that are used by CI that are changed to HTTPS.
Notes:
- I didn't change any to or in licences
- Some links don't support HTTPS :(
- Some `http` links were dead, in those cases I upgraded them to their new places (all of which used HTTPS)
Re-add support for parsing (and pretty-printing) inner-attributes in match body
Re-add support for parsing (and pretty-printing) inner-attributes within body of a `match`.
In other words, we can do `match EXPR { #![inner_attr] ARM_1 ARM_2 ... }` again.
I believe this unbreaks the only four crates that crater flagged as broken by PR #83312.
(I am putting this up so that the lang-team can check it out and decide whether it changes their mind about what to do regarding PR #83312.)
Fix two ICEs in the parser
This pull request fixes#84104 and fixes#84148. The latter is caused by an invalid `assert_ne!()` in the parser, which I have simply removed because the error is then caught in another part of the parser.
#84104 is somewhat more subtle and has to do with a suggestion to remove extraneous `<` characters; for instance:
```rust
fn main() {
foo::<Ty<<<i32>();
}
```
currently leads to
```
error: unmatched angle brackets
--> unmatched-langle.rs:2:10
|
2 | foo::<Ty<<<i32>();
| ^^^ help: remove extra angle brackets
```
which is obviously wrong and stems from the fact that the code for issuing the above suggestion does not consider the possibility that there might be other tokens in between the opening angle brackets. In #84104, this has led to a span being generated that ends in the middle of a multi-byte character (because the code issuing the suggestion thought that it was only skipping over `<`, which are single-byte), causing an ICE.
Remove unused feature gates
The first commit removes a usage of a feature gate, but I don't expect it to be controversial as the feature gate was only used to workaround a limitation of rust in the past. (closures never being `Clone`)
The second commit uses `#[allow_internal_unstable]` to avoid leaking the `trusted_step` feature gate usage from inside the index newtype macro. It didn't work for the `min_specialization` feature gate though.
The third commit removes (almost) all feature gates from the compiler that weren't used anyway.
# Stabilization report
## Summary
This stabilizes using macro expansion in key-value attributes, like so:
```rust
#[doc = include_str!("my_doc.md")]
struct S;
#[path = concat!(env!("OUT_DIR"), "/generated.rs")]
mod m;
```
See the changes to the reference for details on what macros are allowed;
see Petrochenkov's excellent blog post [on internals](https://internals.rust-lang.org/t/macro-expansion-points-in-attributes/11455)
for alternatives that were considered and rejected ("why accept no more
and no less?")
This has been available on nightly since 1.50 with no major issues.
## Notes
### Accepted syntax
The parser accepts arbitrary Rust expressions in this position, but any expression other than a macro invocation will ultimately lead to an error because it is not expected by the built-in expression forms (e.g., `#[doc]`). Note that decorators and the like may be able to observe other expression forms.
### Expansion ordering
Expansion of macro expressions in "inert" attributes occurs after decorators have executed, analogously to macro expressions appearing in the function body or other parts of decorator input.
There is currently no way for decorators to accept macros in key-value position if macro expansion must be performed before the decorator executes (if the macro can simply be copied into the output for later expansion, that can work).
## Test cases
- https://github.com/rust-lang/rust/blob/master/src/test/ui/attributes/key-value-expansion-on-mac.rs
- https://github.com/rust-lang/rust/blob/master/src/test/rustdoc/external-doc.rs
The feature has also been dogfooded extensively in the compiler and
standard library:
- https://github.com/rust-lang/rust/pull/83329
- https://github.com/rust-lang/rust/pull/83230
- https://github.com/rust-lang/rust/pull/82641
- https://github.com/rust-lang/rust/pull/80534
## Implementation history
- Initial proposal: https://github.com/rust-lang/rust/issues/55414#issuecomment-554005412
- Experiment to see how much code it would break: https://github.com/rust-lang/rust/pull/67121
- Preliminary work to restrict expansion that would conflict with this
feature: https://github.com/rust-lang/rust/pull/77271
- Initial implementation: https://github.com/rust-lang/rust/pull/78837
- Fix for an ICE: https://github.com/rust-lang/rust/pull/80563
## Unresolved Questions
~~https://github.com/rust-lang/rust/pull/83366#issuecomment-805180738 listed some concerns, but they have been resolved as of this final report.~~
## Additional Information
There are two workarounds that have a similar effect for `#[doc]`
attributes on nightly. One is to emulate this behavior by using a limited version of this feature that was stabilized for historical reasons:
```rust
macro_rules! forward_inner_docs {
($e:expr => $i:item) => {
#[doc = $e]
$i
};
}
forward_inner_docs!(include_str!("lib.rs") => struct S {});
```
This also works for other attributes (like `#[path = concat!(...)]`).
The other is to use `doc(include)`:
```rust
#![feature(external_doc)]
#[doc(include = "lib.rs")]
struct S {}
```
The first works, but is non-trivial for people to discover, and
difficult to read and maintain. The second is a strange special-case for
a particular use of the macro. This generalizes it to work for any use
case, not just including files.
I plan to remove `doc(include)` when this is stabilized. The
`forward_inner_docs` workaround will still compile without warnings, but
I expect it to be used less once it's no longer necessary.
Recover from invalid `struct` item syntax
Parse unsupported "default field const values":
```rust
struct S {
field: Type = const_val,
}
```
Recover from small `:` typo and provide suggestion:
```rust
struct S {
field; Type,
field2= Type,
}
```
Fix `--remap-path-prefix` not correctly remapping `rust-src` component paths and unify handling of path mapping with virtualized paths
This PR fixes#73167 ("Binaries end up containing path to the rust-src component despite `--remap-path-prefix`") by preventing real local filesystem paths from reaching compilation output if the path is supposed to be remapped.
`RealFileName::Named` introduced in #72767 is now renamed as `LocalPath`, because this variant wraps a (most likely) valid local filesystem path.
`RealFileName::Devirtualized` is renamed as `Remapped` to be used for remapped path from a real path via `--remap-path-prefix` argument, as well as real path inferred from a virtualized (during compiler bootstrapping) `/rustc/...` path. The `local_path` field is now an `Option<PathBuf>`, as it will be set to `None` before serialisation, so it never reaches any build output. Attempting to serialise a non-`None` `local_path` will cause an assertion faliure.
When a path is remapped, a `RealFileName::Remapped` variant is created. The original path is preserved in `local_path` field and the remapped path is saved in `virtual_name` field. Previously, the `local_path` is directly modified which goes against its purpose of "suitable for reading from the file system on the local host".
`rustc_span::SourceFile`'s fields `unmapped_path` (introduced by #44940) and `name_was_remapped` (introduced by #41508 when `--remap-path-prefix` feature originally added) are removed, as these two pieces of information can be inferred from the `name` field: if it's anything other than a `FileName::Real(_)`, or if it is a `FileName::Real(RealFileName::LocalPath(_))`, then clearly `name_was_remapped` would've been false and `unmapped_path` would've been `None`. If it is a `FileName::Real(RealFileName::Remapped{local_path, virtual_name})`, then `name_was_remapped` would've been true and `unmapped_path` would've been `Some(local_path)`.
cc `@eddyb` who implemented `/rustc/...` path devirtualisation
Parse unsupported "default field const values":
```rust
struct S {
field: Type = const_val,
}
```
Recover from small `:` typo and provide suggestion:
```rust
struct S {
field; Type,
field2= Type,
}
```
In other words, we can do `match EXPR { #![inner_attr] ARM_1 ARM_2 ... }` again.
I believe this unbreaks the only four crates that crater flagged as broken by PR 83312.
(I am putting this up so that the lang-team can check it out and decide whether
it changes their mind about what to do regarding PR 83312.)
Improve diagnostics for functions in `struct` definitions
Tries to implement #76421.
This is probably going to need unit tests, but I wanted to hear from review all the cases tests should cover.
I'd like to follow up with the "mechanically applicable suggestion here that adds an impl block" step, but I'd need guidance. My idea for now would be to try to parse a function, and if that succeeds, create a dummy `ast::Item` impl block to then format it using `pprust`. Would that be a viable approach? Is there a better alternative?
r? `@matklad` cc `@estebank`
