Jump threading stores values as `u128` (`ScalarInt`) and does its
comparisons for equality as integer comparisons.
This works great for integers. Sadly, not everything is an integer.
Floats famously have wonky equality semantcs, with `NaN!=NaN` and
`0.0 == -0.0`. This does not match our beautiful integer bitpattern
equality and therefore causes things to go horribly wrong.
While jump threading could be extended to support floats by remembering
that they're floats in the value state and handling them properly,
it's signficantly easier to just disable it for now.
Make `missing_fragment_specifier` an error in edition 2024
`missing_fragment_specifier` has been a future compatibility warning since 2017. Uplifting it to an unconditional hard error was attempted in 2020, but eventually reverted due to fallout.
Make it an error only in edition >= 2024, leaving the lint for older editions. This change will make it easier to support more macro syntax that relies on usage of `$`.
Fixes <https://github.com/rust-lang/rust/issues/40107>
---
It is rather late for the edition but since this change is relatively small, it seems worth at least bringing up. This follows a brief [Zulip discussion](https://rust-lang.zulipchat.com/#narrow/stream/268952-edition/topic/.60.20DBD.20-.3E.20hard.20error) (cc `@tmandry).`
Making this an edition-dependent lint has come up before but there was not a strong motivation. I am proposing it at this time because this would simplify the [named macro capture groups](https://github.com/rust-lang/rfcs/pull/3649) RFC, which has had mildly positive response, and makes use of new `$` syntax in the matcher. The proposed syntax currently parses as metavariables without a fragment specifier; this warning is raised, but there are no errors.
It is obviously not known that this specific RFC will eventually be accepted, but forbidding `missing_fragment_specifier` should make it easier to support any new syntax in the future that makes use of `$` in different ways. The syntax conflict is also not impossible to overcome, but making it clear that unnamed metavariables are rejected makes things more straightforward and should allow for better diagnostics.
`@Mark-Simulacrum` suggested making this forbid-by-default instead of an error at https://github.com/rust-lang/rust/issues/40107#issuecomment-761727885, but I don't think this would allow the same level of syntax flexibility.
It is also possible to reconsider making this an unconditional error since four years have elapsed since the previous attempt, but this seems likely to hit the same pitfalls. (Possibly worth a crater run?)
Tracking:
- https://github.com/rust-lang/rust/issues/128143
- merge error codes
- use attribute name that is incompatible in error message
- add test for conditional incompatible attribute
- add `linkage` to the allowlist
`missing_fragment_specifier` has been a future compatibility warning
since 2017. Uplifting it to an unconditional hard error was attempted in
2020, but eventually reverted due to fallout.
Make it an error only in edition >= 2024, leaving the lint for older
editions. This change will make it easier to support more macro syntax
that relies on usage of `$`.
Fixes <https://github.com/rust-lang/rust/issues/40107>
Always set `result` during `finish()` in debug builders
Most functions for format builders set `self.result` after writing strings. This ensures that any further writing fails immediately rather than trying to write again.
A few `.finish()` methods and the `.finish_non_exhaustive` did have this same behavior, so update the remaining `.finish()` methods to make it consistent here.
Both these platforms have MSG_NOSIGNAL available, and we should set it for
socket writes in the event that the SIGPIPE handler has been reset to SIG_DFL
(i.e. terminate the process).
I've verified via a quick program at
https://github.com/sunshowers/msg-nosignal-test/ that even when the SIGPIPE
handler is reset to SIG_DFL, writes to closed sockets now error out with EPIPE.
(Under ordinary circumstances UDP writes won't cause MSG_NOSIGNAL.)
Improve `extern "<abi>" unsafe fn()` error message
These errors were already reported in #87217, and fixed by #87235 but missed the case of an explicit ABI.
This PR does not cover multiple keywords like `extern "C" pub const unsafe fn()`, but I don't know what a good way to cover this would be. It also seems rarer than `extern "C" unsafe` which I saw happen a few times in workshops.
Remove unnecessary range replacements
This PR removes an unnecessary range replacement in `collect_tokens_trailing_token`, and does a couple of other small cleanups.
r? ````@petrochenkov````
rustdoc: change title of search results
the current title is too similar to that of the page for std::result::Result, which is a problem both for
navigating to the Result docs via browser autocomplete, and for being able to tell which tab is which when the width of tabs is small.
Implement `Copy`/`Clone` for async closures
We can do so in the same cases that regular closures do.
For the purposes of cloning, coroutine-closures are actually precisely the same as regular closures, specifically in the aspect that `Clone` impls care about which is the upvars. The only difference b/w coroutine-closures and regular closures is the type that they *return*, but this type has not been *created* yet, so we don't really have a problem.
IDK why I didn't add this impl initially -- I went back and forth a bit on the internal representation for coroutine-closures before settling on a design which largely models regular closures. Previous (not published) iterations of coroutine-closures used to be represented as a special (read: cursed) kind of coroutine, which would probably suffer from the pitfalls that coroutines have that oli mentioned below in https://github.com/rust-lang/rust/pull/128201#issuecomment-2251230274.
r? oli-obk
Stabilize const `{integer}::from_str_radix` i.e. `const_int_from_str`
This PR stabilizes the feature `const_int_from_str`.
- ACP Issue: rust-lang/libs-team#74
- Implementation PR: rust-lang/rust#99322
- Part of Tracking Issue: rust-lang/rust#59133
API Change Diff:
```diff
impl {integer} {
- pub fn from_str_radix(src: &str, radix: u32) -> Result<Self, ParseIntError>;
+ pub const fn from_str_radix(src: &str, radix: u32) -> Result<Self, ParseIntError>;
}
impl ParseIntError {
- pub fn kind(&self) -> &IntErrorKind;
+ pub const fn kind(&self) -> &IntErrorKind;
}
```
This makes it easier to parse integers at compile-time, e.g.
the example from the Tracking Issue:
```rust
env!("SOMETHING").parse::<usize>().unwrap()
```
could now be achived with
```rust
match usize::from_str_radix(env!("SOMETHING"), 10) {
Ok(val) => val,
Err(err) => panic!("Invalid value for SOMETHING environment variable."),
}
```
rather than having to depend on a library that implements or manually implement the parsing at compile-time.
---
Checklist based on [Libs Stabilization Guide - When there's const involved](https://std-dev-guide.rust-lang.org/development/stabilization.html#when-theres-const-involved)
I am treating this as a [partial stabilization](https://std-dev-guide.rust-lang.org/development/stabilization.html#partial-stabilizations) as it shares a tracking issue (and is rather small), so directly opening the partial stabilization PR for the subset (feature `const_int_from_str`) being stabilized.
- [x] ping Constant Evaluation WG
- [x] no unsafe involved
- [x] no `#[allow_internal_unstable]`
- [ ] usage of `intrinsic::const_eval_select` rust-lang/rust#124625 in `from_str_radix_assert` to change the error message between compile-time and run-time
- [ ] [rust-labg/libs-api FCP](https://github.com/rust-lang/rust/pull/124941#issuecomment-2207021921)
Support ?Trait bounds in supertraits and dyn Trait under a feature gate
This patch allows `maybe` polarity bounds under a feature gate. The only language change here is that corresponding hard errors are replaced by feature gates. Example:
```rust
#![feature(allow_maybe_polarity)]
...
trait Trait1 : ?Trait { ... } // ok
fn foo(_: Box<(dyn Trait2 + ?Trait)>) {} // ok
fn bar<T: ?Sized + ?Trait>(_: &T) {} // ok
```
Maybe bounds still don't do anything (except for `Sized` trait), however this patch will allow us to [experiment with default auto traits](https://github.com/rust-lang/rust/pull/120706#issuecomment-1934006762).
This is a part of the [MCP: Low level components for async drop](https://github.com/rust-lang/compiler-team/issues/727)
Most functions for format builders set `self.result` after writing
strings. This ensures that any further writing fails immediately rather
than trying to write again.
A few `.finish()` methods did have this same behavior, so make it
consistent here.
Migrate `c-unwind-abi-catch-lib-panic`, `foreign-rust-exceptions` and `export-executable-symbols` `run-make` tests to rmake
Part of #121876 and the associated [Google Summer of Code project](https://blog.rust-lang.org/2024/05/01/gsoc-2024-selected-projects.html).
Please try:
try-job: aarch64-apple
try-job: i686-mingw
Let InstCombine remove Clone shims inside Clone shims
The Clone shims that we generate tend to recurse into other Clone shims, which gets very silly very quickly. Here's our current state: https://godbolt.org/z/E69YeY8eq
So I've added InstSimplify to the shims optimization passes, and improved `is_trivially_pure_clone_copy` so that it can delete those calls inside the shim. This makes the shim way smaller because most of its size is the required ceremony for unwinding.
This change also completely breaks the UI test added for https://github.com/rust-lang/rust/issues/104870. With this PR, that program ICEs in MIR type checking because `is_trivially_pure_clone_copy` and the trait solver disagree on whether `*mut u8` is `Copy`. And adding the requisite `Copy` impl to make them agree makes the test not generate any diagnostics. Considering that I spent most of my time on this PR fixing `#![no_core]` tests, I would prefer to just delete this one. The maintenance burden of `#![no_core]` is uniquely high because when they break they tend to break in very confusing ways.
try-job: x86_64-mingw
