Introduce a fast path that avoids the `debug_tuple` abstraction when deriving Debug for unit-like enum variants.
The intent here is to allow LLVM to remove the switch entirely in favor of an
indexed load from a table of constant strings, which is likely what the
programmer would write in C. Unfortunately, LLVM currently doesn't perform this
optimization due to a bug, but there is [a
patch](https://reviews.llvm.org/D109565) that fixes this issue. I've verified
that, with that patch applied on top of this commit, Debug for unit-like tuple
variants becomes a load, reducing the O(n) code bloat to O(1).
Note that inlining `DebugTuple::finish()` wasn't enough to allow LLVM to
optimize the code properly; I had to avoid the abstraction entirely. Not using
the abstraction is likely better for compile time anyway.
Part of #88793.
r? `@oli-obk`
Debug for unit-like enum variants.
The intent here is to allow LLVM to remove the switch entirely in favor of an
indexed load from a table of constant strings, which is likely what the
programmer would write in C. Unfortunately, LLVM currently doesn't perform this
optimization due to a bug, but there is [a
patch](https://reviews.llvm.org/D109565) that fixes this issue. I've verified
that, with that patch applied on top of this commit, Debug for unit-like tuple
variants becomes a load, reducing the O(n) code bloat to O(1).
Note that inlining `DebugTuple::finish()` wasn't enough to allow LLVM to
optimize the code properly; I had to avoid the abstraction entirely. Not using
the abstraction is likely better for compile time anyway.
Part of #88793.
Detect bare blocks with type ascription that were meant to be a `struct` literal
Address part of #34255.
Potential improvement: silence the other knock down errors in `issue-34255-1.rs`.
Remove `Session.used_attrs` and move logic to `CheckAttrVisitor`
Instead of updating global state to mark attributes as used,
we now explicitly emit a warning when an attribute is used in
an unsupported position. As a side effect, we are to emit more
detailed warning messages (instead of just a generic "unused" message).
`Session.check_name` is removed, since its only purpose was to mark
the attribute as used. All of the callers are modified to use
`Attribute.has_name`
Additionally, `AttributeType::AssumedUsed` is removed - an 'assumed
used' attribute is implemented by simply not performing any checks
in `CheckAttrVisitor` for a particular attribute.
We no longer emit unused attribute warnings for the `#[rustc_dummy]`
attribute - it's an internal attribute used for tests, so it doesn't
mark sense to treat it as 'unused'.
With this commit, a large source of global untracked state is removed.
Get piece unchecked in `write`
We already use specialized `zip`, but it seems like we can do a little better by not checking `pieces` length at all.
`Arguments` constructors are now unsafe. So the `format_args!` expansion now includes an `unsafe` block.
<details>
<summary>Local Bench Diff</summary>
```text
name before ns/iter after ns/iter diff ns/iter diff % speedup
fmt::write_str_macro1 22,967 19,718 -3,249 -14.15% x 1.16
fmt::write_str_macro2 35,527 32,654 -2,873 -8.09% x 1.09
fmt::write_str_macro_debug 571,953 575,973 4,020 0.70% x 0.99
fmt::write_str_ref 9,579 9,459 -120 -1.25% x 1.01
fmt::write_str_value 9,573 9,572 -1 -0.01% x 1.00
fmt::write_u128_max 176 173 -3 -1.70% x 1.02
fmt::write_u128_min 138 134 -4 -2.90% x 1.03
fmt::write_u64_max 139 136 -3 -2.16% x 1.02
fmt::write_u64_min 129 135 6 4.65% x 0.96
fmt::write_vec_macro1 24,401 22,273 -2,128 -8.72% x 1.10
fmt::write_vec_macro2 37,096 35,602 -1,494 -4.03% x 1.04
fmt::write_vec_macro_debug 588,291 589,575 1,284 0.22% x 1.00
fmt::write_vec_ref 9,568 9,732 164 1.71% x 0.98
fmt::write_vec_value 9,516 9,625 109 1.15% x 0.99
```
</details>
Instead of updating global state to mark attributes as used,
we now explicitly emit a warning when an attribute is used in
an unsupported position. As a side effect, we are to emit more
detailed warning messages (instead of just a generic "unused" message).
`Session.check_name` is removed, since its only purpose was to mark
the attribute as used. All of the callers are modified to use
`Attribute.has_name`
Additionally, `AttributeType::AssumedUsed` is removed - an 'assumed
used' attribute is implemented by simply not performing any checks
in `CheckAttrVisitor` for a particular attribute.
We no longer emit unused attribute warnings for the `#[rustc_dummy]`
attribute - it's an internal attribute used for tests, so it doesn't
mark sense to treat it as 'unused'.
With this commit, a large source of global untracked state is removed.
Add support for clobber_abi to asm!
This PR adds the `clobber_abi` feature that was proposed in #81092.
Fixes#81092
cc `@rust-lang/wg-inline-asm`
r? `@nagisa`
Since RFC 3052 soft deprecated the authors field anyway, hiding it from
crates.io, docs.rs, and making Cargo not add it by default, and it is
not generally up to date/useful information, we should remove it from
crates in this repo.
avoid temporary vectors/reuse iterators
Avoid collecting an interator just to re-iterate immediately.
Rather reuse the previous iterator. (clippy::needless_collect)
Various diagnostics clean ups/tweaks
* Always point at macros, including derive macros
* Point at non-local items that introduce a trait requirement
* On private associated item, point at definition
* Always point at macros, including derive macros
* Point at non-local items that introduce a trait requirement
* On private associated item, point at definition
When we need to emit a lint at a macro invocation, we currently use the
`NodeId` of its parent definition (e.g. the enclosing function). This
means that any `#[allow]` / `#[deny]` attributes placed 'closer' to the
macro (e.g. on an enclosing block or statement) will have no effect.
This commit computes a better `lint_node_id` in `InvocationCollector`.
When we visit/flat_map an AST node, we assign it a `NodeId` (earlier
than we normally would), and store than `NodeId` in current
`ExpansionData`. When we collect a macro invocation, the current
`lint_node_id` gets cloned along with our `ExpansionData`, allowing it
to be used if we need to emit a lint later on.
This improves the handling of `#[allow]` / `#[deny]` for
`SEMICOLON_IN_EXPRESSIONS_FROM_MACROS` and some `asm!`-related lints.
The 'legacy derive helpers' lint retains its current behavior
(I've inlined the now-removed `lint_node_id` function), since
there isn't an `ExpansionData` readily available.
Make `s` pre-interned
Now we should be able to pre-intern `s` as the test `ui/lint/rfc-2457-non-ascii-idents/lint-confusable-idents.rs` no longer fails.
Show test type during prints
Test output can sometimes be confusing. For example doctest with the no_run argument are displayed the same way than test that are run.
During #83857 I got the feedback that test output can be confusing.
For the moment test output is
```
test $DIR/test-type.rs - f (line 12) ... ignored
test $DIR/test-type.rs - f (line 15) ... ok
test $DIR/test-type.rs - f (line 21) ... ok
test $DIR/test-type.rs - f (line 6) ... ok
```
I propose to change output by indicating the test type as
```
test $DIR/test-type.rs - f (line 12) ... ignored
test $DIR/test-type.rs - f (line 15) - compile ... ok
test $DIR/test-type.rs - f (line 21) - compile fail ... ok
test $DIR/test-type.rs - f (line 6) ... ok
```
by indicating the test type after the test name (and in the case of doctest after the function name and line) and before the "...".
------------
Note: this is a proof of concept, the implementation is probably not optimal as the properties added in `TestDesc` are only use in the display and does not represent actual change of behavior, maybe `TestType::DocTest` could have fields
Fix `--remap-path-prefix` not correctly remapping `rust-src` component paths and unify handling of path mapping with virtualized paths
This PR fixes#73167 ("Binaries end up containing path to the rust-src component despite `--remap-path-prefix`") by preventing real local filesystem paths from reaching compilation output if the path is supposed to be remapped.
`RealFileName::Named` introduced in #72767 is now renamed as `LocalPath`, because this variant wraps a (most likely) valid local filesystem path.
`RealFileName::Devirtualized` is renamed as `Remapped` to be used for remapped path from a real path via `--remap-path-prefix` argument, as well as real path inferred from a virtualized (during compiler bootstrapping) `/rustc/...` path. The `local_path` field is now an `Option<PathBuf>`, as it will be set to `None` before serialisation, so it never reaches any build output. Attempting to serialise a non-`None` `local_path` will cause an assertion faliure.
When a path is remapped, a `RealFileName::Remapped` variant is created. The original path is preserved in `local_path` field and the remapped path is saved in `virtual_name` field. Previously, the `local_path` is directly modified which goes against its purpose of "suitable for reading from the file system on the local host".
`rustc_span::SourceFile`'s fields `unmapped_path` (introduced by #44940) and `name_was_remapped` (introduced by #41508 when `--remap-path-prefix` feature originally added) are removed, as these two pieces of information can be inferred from the `name` field: if it's anything other than a `FileName::Real(_)`, or if it is a `FileName::Real(RealFileName::LocalPath(_))`, then clearly `name_was_remapped` would've been false and `unmapped_path` would've been `None`. If it is a `FileName::Real(RealFileName::Remapped{local_path, virtual_name})`, then `name_was_remapped` would've been true and `unmapped_path` would've been `Some(local_path)`.
cc `@eddyb` who implemented `/rustc/...` path devirtualisation
This PR implements span quoting, allowing proc-macros to produce spans
pointing *into their own crate*. This is used by the unstable
`proc_macro::quote!` macro, allowing us to get error messages like this:
```
error[E0412]: cannot find type `MissingType` in this scope
--> $DIR/auxiliary/span-from-proc-macro.rs:37:20
|
LL | pub fn error_from_attribute(_args: TokenStream, _input: TokenStream) -> TokenStream {
| ----------------------------------------------------------------------------------- in this expansion of procedural macro `#[error_from_attribute]`
...
LL | field: MissingType
| ^^^^^^^^^^^ not found in this scope
|
::: $DIR/span-from-proc-macro.rs:8:1
|
LL | #[error_from_attribute]
| ----------------------- in this macro invocation
```
Here, `MissingType` occurs inside the implementation of the proc-macro
`#[error_from_attribute]`. Previosuly, this would always result in a
span pointing at `#[error_from_attribute]`
This will make many proc-macro-related error message much more useful -
when a proc-macro generates code containing an error, users will get an
error message pointing directly at that code (within the macro
definition), instead of always getting a span pointing at the macro
invocation site.
This is implemented as follows:
* When a proc-macro crate is being *compiled*, it causes the `quote!`
macro to get run. This saves all of the sapns in the input to `quote!`
into the metadata of *the proc-macro-crate* (which we are currently
compiling). The `quote!` macro then expands to a call to
`proc_macro::Span::recover_proc_macro_span(id)`, where `id` is an
opaque identifier for the span in the crate metadata.
* When the same proc-macro crate is *run* (e.g. it is loaded from disk
and invoked by some consumer crate), the call to
`proc_macro::Span::recover_proc_macro_span` causes us to load the span
from the proc-macro crate's metadata. The proc-macro then produces a
`TokenStream` containing a `Span` pointing into the proc-macro crate
itself.
The recursive nature of 'quote!' can be difficult to understand at
first. The file `src/test/ui/proc-macro/quote-debug.stdout` shows
the output of the `quote!` macro, which should make this eaier to
understand.
This PR also supports custom quoting spans in custom quote macros (e.g.
the `quote` crate). All span quoting goes through the
`proc_macro::quote_span` method, which can be called by a custom quote
macro to perform span quoting. An example of this usage is provided in
`src/test/ui/proc-macro/auxiliary/custom-quote.rs`
Custom quoting currently has a few limitations:
In order to quote a span, we need to generate a call to
`proc_macro::Span::recover_proc_macro_span`. However, proc-macros
support renaming the `proc_macro` crate, so we can't simply hardcode
this path. Previously, the `quote_span` method used the path
`crate::Span` - however, this only works when it is called by the
builtin `quote!` macro in the same crate. To support being called from
arbitrary crates, we need access to the name of the `proc_macro` crate
to generate a path. This PR adds an additional argument to `quote_span`
to specify the name of the `proc_macro` crate. Howver, this feels kind
of hacky, and we may want to change this before stabilizing anything
quote-related.
Additionally, using `quote_span` currently requires enabling the
`proc_macro_internals` feature. The builtin `quote!` macro
has an `#[allow_internal_unstable]` attribute, but this won't work for
custom quote implementations. This will likely require some additional
tricks to apply `allow_internal_unstable` to the span of
`proc_macro::Span::recover_proc_macro_span`.
using allow_internal_unstable (as recommended)
Fixes: #84836
```shell
$ ./build/x86_64-unknown-linux-gnu/stage1/bin/rustc src/test/run-make-fulldeps/coverage/no_cov_crate.rs
error[E0554]: `#![feature]` may not be used on the dev release channel
--> src/test/run-make-fulldeps/coverage/no_cov_crate.rs:2:1
|
2 | #![feature(no_coverage)]
| ^^^^^^^^^^^^^^^^^^^^^^^^
error: aborting due to previous error
For more information about this error, try `rustc --explain E0554`.
```
The Eq trait has a special hidden function. MIR `InstrumentCoverage`
would add this function to the coverage map, but it is never called, so
the `Eq` trait would always appear uncovered.
Fixes: #83601
The fix required creating a new function attribute `no_coverage` to mark
functions that should be ignored by `InstrumentCoverage` and the
coverage `mapgen` (during codegen).
While testing, I also noticed two other issues:
* spanview debug file output ICEd on a function with no body. The
workaround for this is included in this PR.
* `assert_*!()` macro coverage can appear covered if followed by another
`assert_*!()` macro. Normally they appear uncovered. I submitted a new
Issue #84561, and added a coverage test to demonstrate this issue.
This PR modifies the macro expansion infrastructure to handle attributes
in a fully token-based manner. As a result:
* Derives macros no longer lose spans when their input is modified
by eager cfg-expansion. This is accomplished by performing eager
cfg-expansion on the token stream that we pass to the derive
proc-macro
* Inner attributes now preserve spans in all cases, including when we
have multiple inner attributes in a row.
This is accomplished through the following changes:
* New structs `AttrAnnotatedTokenStream` and `AttrAnnotatedTokenTree` are introduced.
These are very similar to a normal `TokenTree`, but they also track
the position of attributes and attribute targets within the stream.
They are built when we collect tokens during parsing.
An `AttrAnnotatedTokenStream` is converted to a regular `TokenStream` when
we invoke a macro.
* Token capturing and `LazyTokenStream` are modified to work with
`AttrAnnotatedTokenStream`. A new `ReplaceRange` type is introduced, which
is created during the parsing of a nested AST node to make the 'outer'
AST node aware of the attributes and attribute target stored deeper in the token stream.
* When we need to perform eager cfg-expansion (either due to `#[derive]` or `#[cfg_eval]`),
we tokenize and reparse our target, capturing additional information about the locations of
`#[cfg]` and `#[cfg_attr]` attributes at any depth within the target.
This is a performance optimization, allowing us to perform less work
in the typical case where captured tokens never have eager cfg-expansion run.
Use AnonConst for asm! constants
This replaces the old system which used explicit promotion. See #83169 for more background.
The syntax for `const` operands is still the same as before: `const <expr>`.
Fixes#83169
Because the implementation is heavily based on inline consts, we suffer from the same issues:
- We lose the ability to use expressions derived from generics. See the deleted tests in `src/test/ui/asm/const.rs`.
- We are hitting the same ICEs as inline consts, for example #78174. It is unlikely that we will be able to stabilize this before inline consts are stabilized.
Don't ICE when using `#[global_alloc]` on a non-item statement
Fixes#83469
We need to return an `Annotatable::Stmt` if we were passed an
`Annotatable::Stmt`
Emit error when trying to use assembler syntax directives in `asm!`
The `.intel_syntax` and `.att_syntax` assembler directives should not be used, in favor of not specifying a syntax for intel, and in favor of the explicit `att_syntax` option using the inline assembly options.
Closes#79869
StructField -> FieldDef ("field definition")
Field -> ExprField ("expression field", not "field expression")
FieldPat -> PatField ("pattern field", not "field pattern")
Also rename visiting and other methods working on them.
Edition-specific preludes
This changes `{std,core}::prelude` to export edition-specific preludes under `rust_2015`, `rust_2018` and `rust_2021`. (As suggested in https://github.com/rust-lang/rust/issues/51418#issuecomment-395630382.) For now they all just re-export `v1::*`, but this allows us to add things to the 2021edition prelude soon.
This also changes the compiler to make the automatically injected prelude import dependent on the selected edition.
cc `@rust-lang/libs` `@djc`
Implement built-in attribute macro `#[cfg_eval]` + some refactoring
This PR implements a built-in attribute macro `#[cfg_eval]` as it was suggested in https://github.com/rust-lang/rust/pull/79078 to avoid `#[derive()]` without arguments being abused as a way to configure input for other attributes.
The macro is used for eagerly expanding all `#[cfg]` and `#[cfg_attr]` attributes in its input ("fully configuring" the input).
The effect is identical to effect of `#[derive(Foo, Bar)]` which also fully configures its input before passing it to macros `Foo` and `Bar`, but unlike `#[derive]` `#[cfg_eval]` can be applied to any syntax nodes supporting macro attributes, not only certain items.
`cfg_eval` was the first name suggested in https://github.com/rust-lang/rust/pull/79078, but other alternatives are also possible, e.g. `cfg_expand`.
```rust
#[cfg_eval]
#[my_attr] // Receives `struct S {}` as input, the field is configured away by `#[cfg_eval]`
struct S {
#[cfg(FALSE)]
field: u8,
}
```
Tracking issue: https://github.com/rust-lang/rust/issues/82679
Crate root is sufficiently different from `mod` items, at least at syntactic level.
Also remove customization point for "`mod` item or crate root" from AST visitors.
The derived implementation of `partial_cmp` compares matching fields one
by one, stopping the computation when the result of a comparison is not
equal to `Some(Equal)`.
On the other hand the derived implementation for `lt`, `le`, `gt` and
`ge` continues the computation when the result of a field comparison is
`None`, consequently those operators are not transitive and inconsistent
with `partial_cmp`.
Fix the inconsistency by using the default implementation that fall-backs
to the `partial_cmp`. This also avoids creating very deeply nested
closures that were quite costly to compile.
Fix bug with assert!() calling the wrong edition of panic!().
The span of `panic!` produced by the `assert` macro did not carry the right edition. This changes `assert` to call the right version.
Also adds tests for the 2021 edition of panic and assert, that would've caught this.
