More derive output improvements
This PR includes:
- Some test improvements.
- Some cosmetic changes to derive output that make the code look more like what a human would write.
- Some more fundamental improvements to `cmp` and `partial_cmp` generation.
r? `@Mark-Simulacrum`
It's common to see repeated assertions like this in derived `clone` and
`eq` methods:
```
let _: ::core::clone::AssertParamIsClone<u32>;
let _: ::core::clone::AssertParamIsClone<u32>;
```
This commit avoids them.
This avoids the name clash with `rustc_serialize::Encoder` (a trait),
and allows lots qualifiers to be removed and imports to be simplified
(e.g. fewer `as` imports).
(This was previously merged as commit 5 in #94732 and then was reverted
in #97905 because of a perf regression caused by commit 4 in #94732.)
Don't suggest adding `let` in certain `if` conditions
Avoid being too eager to suggest `let` in an `if` condition with an `=`, namely when the LHS of the `=` isn't even valid as a pattern (to a first degree approximation).
This heustic I came up with kinda sucks. Let me know if it needs to be refined.
This avoids the name clash with `rustc_serialize::Encoder` (a trait),
and allows lots qualifiers to be removed and imports to be simplified
(e.g. fewer `as` imports).
There are two impls of the `Encoder` trait: `opaque::Encoder` and
`opaque::FileEncoder`. The former encodes into memory and is infallible, the
latter writes to file and is fallible.
Currently, standard `Result`/`?`/`unwrap` error handling is used, but this is a
bit verbose and has non-trivial cost, which is annoying given how rare failures
are (especially in the infallible `opaque::Encoder` case).
This commit changes how `Encoder` fallibility is handled. All the `emit_*`
methods are now infallible. `opaque::Encoder` requires no great changes for
this. `opaque::FileEncoder` now implements a delayed error handling strategy.
If a failure occurs, it records this via the `res` field, and all subsequent
encoding operations are skipped if `res` indicates an error has occurred. Once
encoding is complete, the new `finish` method is called, which returns a
`Result`. In other words, there is now a single `Result`-producing method
instead of many of them.
This has very little effect on how any file errors are reported if
`opaque::FileEncoder` has any failures.
Much of this commit is boring mechanical changes, removing `Result` return
values and `?` or `unwrap` from expressions. The more interesting parts are as
follows.
- serialize.rs: The `Encoder` trait gains an `Ok` associated type. The
`into_inner` method is changed into `finish`, which returns
`Result<Vec<u8>, !>`.
- opaque.rs: The `FileEncoder` adopts the delayed error handling
strategy. Its `Ok` type is a `usize`, returning the number of bytes
written, replacing previous uses of `FileEncoder::position`.
- Various methods that take an encoder now consume it, rather than being
passed a mutable reference, e.g. `serialize_query_result_cache`.
Begin fixing all the broken doctests in `compiler/`
Begins to fix#95994.
All of them pass now but 24 of them I've marked with `ignore HELP (<explanation>)` (asking for help) as I'm unsure how to get them to work / if we should leave them as they are.
There are also a few that I marked `ignore` that could maybe be made to work but seem less important.
Each `ignore` has a rough "reason" for ignoring after it parentheses, with
- `(pseudo-rust)` meaning "mostly rust-like but contains foreign syntax"
- `(illustrative)` a somewhat catchall for either a fragment of rust that doesn't stand on its own (like a lone type), or abbreviated rust with ellipses and undeclared types that would get too cluttered if made compile-worthy.
- `(not-rust)` stuff that isn't rust but benefits from the syntax highlighting, like MIR.
- `(internal)` uses `rustc_*` code which would be difficult to make work with the testing setup.
Those reason notes are a bit inconsistently applied and messy though. If that's important I can go through them again and try a more principled approach. When I run `rg '```ignore \(' .` on the repo, there look to be lots of different conventions other people have used for this sort of thing. I could try unifying them all if that would be helpful.
I'm not sure if there was a better existing way to do this but I wrote my own script to help me run all the doctests and wade through the output. If that would be useful to anyone else, I put it here: https://github.com/Elliot-Roberts/rust_doctest_fixing_tool
Overhaul `MacArgs`
Motivation:
- Clarify some code that I found hard to understand.
- Eliminate one use of three places where `TokenKind::Interpolated` values are created.
r? `@petrochenkov`
The value in `MacArgs::Eq` is currently represented as a `Token`.
Because of `TokenKind::Interpolated`, `Token` can be either a token or
an arbitrary AST fragment. In practice, a `MacArgs::Eq` starts out as a
literal or macro call AST fragment, and then is later lowered to a
literal token. But this is very non-obvious. `Token` is a much more
general type than what is needed.
This commit restricts things, by introducing a new type `MacArgsEqKind`
that is either an AST expression (pre-lowering) or an AST literal
(post-lowering). The downside is that the code is a bit more verbose in
a few places. The benefit is that makes it much clearer what the
possibilities are (though also shorter in some other places). Also, it
removes one use of `TokenKind::Interpolated`, taking us a step closer to
removing that variant, which will let us make `Token` impl `Copy` and
remove many "handle Interpolated" code paths in the parser.
Things to note:
- Error messages have improved. Messages like this:
```
unexpected token: `"bug" + "found"`
```
now say "unexpected expression", which makes more sense. Although
arbitrary expressions can exist within tokens thanks to
`TokenKind::Interpolated`, that's not obvious to anyone who doesn't
know compiler internals.
- In `parse_mac_args_common`, we no longer need to collect tokens for
the value expression.
Using an obviously-placeholder syntax. An RFC would still be needed before this could have any chance at stabilization, and it might be removed at any point.
But I'd really like to have it in nightly at least to ensure it works well with try_trait_v2, especially as we refactor the traits.
Remove last vestiges of skippng ident span hashing
This removes a comment that no longer applies, and properly hashes
the full ident for path segments.
More robust fallback for `use` suggestion
Our old way to suggest where to add `use`s would first look for pre-existing `use`s in the relevant crate/module, and if there are *no* uses, it would fallback on trying to use another item as the basis for the suggestion.
But this was fragile, as illustrated in issue #87613
This PR instead identifies span of the first token after any inner attributes, and uses *that* as the fallback for the `use` suggestion.
Fix#87613
then we just suggest the first legal position where you could inject a use.
To do this, I added `inject_use_span` field to `ModSpans`, and populate it in
parser (it is the span of the first token found after inner attributes, if any).
Then I rewrote the use-suggestion code to utilize it, and threw out some stuff
that is now unnecessary with this in place. (I think the result is easier to
understand.)
Then I added a test of issue 87613.
This commit fixes two issues.
One, sometimes break or continue have a block target instead of an
expression target. This seems to mainly happen with try blocks. Since
the drop tracking analysis only works on expressions, if we see a block
target for break or continue, we substitute the last expression of the
block as the target instead.
Two, break and continue were incorrectly being treated as the same, so
continue would also show up as an exit from the loop or block. This
patch corrects the way continue is handled by keeping a stack of loop
entry points and uses those to find the target of the continue.
`Decoder` has two impls:
- opaque: this impl is already partly infallible, i.e. in some places it
currently panics on failure (e.g. if the input is too short, or on a
bad `Result` discriminant), and in some places it returns an error
(e.g. on a bad `Option` discriminant). The number of places where
either happens is surprisingly small, just because the binary
representation has very little redundancy and a lot of input reading
can occur even on malformed data.
- json: this impl is fully fallible, but it's only used (a) for the
`.rlink` file production, and there's a `FIXME` comment suggesting it
should change to a binary format, and (b) in a few tests in
non-fundamental ways. Indeed #85993 is open to remove it entirely.
And the top-level places in the compiler that call into decoding just
abort on error anyway. So the fallibility is providing little value, and
getting rid of it leads to some non-trivial performance improvements.
Much of this commit is pretty boring and mechanical. Some notes about
a few interesting parts:
- The commit removes `Decoder::{Error,error}`.
- `InternIteratorElement::intern_with`: the impl for `T` now has the same
optimization for small counts that the impl for `Result<T, E>` has,
because it's now much hotter.
- Decodable impls for SmallVec, LinkedList, VecDeque now all use
`collect`, which is nice; the one for `Vec` uses unsafe code, because
that gave better perf on some benchmarks.
TraitKind -> Trait
TyAliasKind -> TyAlias
ImplKind -> Impl
FnKind -> Fn
All `*Kind`s in AST are supposed to be enums.
Tuple structs are converted to braced structs for the types above, and fields are reordered in syntactic order.
Also, mutable AST visitor now correctly visit spans in defaultness, unsafety, impl polarity and constness.
This reverts commit 059b68dd67.
Note that this was manually adjusted to retain some of the refactoring
introduced by commit 059b68dd67, so that it could
likewise retain the correction introduced in commit
5b4bc05fa5
Detect bare blocks with type ascription that were meant to be a `struct` literal
Address part of #34255.
Potential improvement: silence the other knock down errors in `issue-34255-1.rs`.
- [x] Removed `?const` and change uses of `?const`
- [x] Added `~const` to the AST. It is gated behind const_trait_impl.
- [x] Validate `~const` in ast_validation.
- [ ] Add enum `BoundConstness` to the HIR. (With variants `NotConst` and
`ConstIfConst` allowing future extensions)
- [ ] Adjust trait selection and pre-existing code to use `BoundConstness`.
- [ ] Optional steps (*for this PR, obviously*)
- [ ] Fix#88155
- [ ] Do something with constness bounds in chalk
Stabilize "RangeFrom" patterns in 1.55
Implements a partial stabilization of #67264 and #37854.
Reference PR: https://github.com/rust-lang/reference/pull/900
# Stabilization Report
This stabilizes the `X..` pattern, shown as such, offering an exhaustive match for unsigned integers:
```rust
match x as u32 {
0 => println!("zero!"),
1.. => println!("positive number!"),
}
```
Currently if a Rust author wants to write such a match on an integer, they must use `1..={integer}::MAX` . By allowing a "RangeFrom" style pattern, this simplifies the match to not require the MAX path and thus not require specifically repeating the type inside the match, allowing for easier refactoring. This is particularly useful for instances like the above case, where different behavior on "0" vs. "1 or any positive number" is desired, and the actual MAX is unimportant.
Notably, this excepts slice patterns which include half-open ranges from stabilization, as the wisdom of those is still subject to some debate.
## Practical Applications
Instances of this specific usage have appeared in the compiler:
16143d1067/compiler/rustc_middle/src/ty/inhabitedness/mod.rs (L219)673d0db5e3/compiler/rustc_ty_utils/src/ty.rs (L524)
And I have noticed there are also a handful of "in the wild" users who have deployed it to similar effect, especially in the case of rejecting any value of a certain number or greater. It simply makes it much more ergonomic to write an irrefutable match, as done in Katholieke Universiteit Leuven's [SCALE and MAMBA project](05e5db00d5/WebAssembly/scale_std/src/fixed_point.rs (L685-L695)).
## Tests
There were already many tests in [src/test/ui/half-open-range/patterns](90a2e5e3fe/src/test/ui/half-open-range-patterns), as well as [generic pattern tests that test the `exclusive_range_pattern` feature](673d0db5e3/src/test/ui/pattern/usefulness/integer-ranges/reachability.rs), many dating back to the feature's introduction and remaining standing to this day. However, this stabilization comes with some additional tests to explore the... sometimes interesting behavior of interactions with other patterns. e.g. There is, at least, a mild diagnostic improvement in some edge cases, because before now, the pattern `0..=(5+1)` encounters the `half_open_range_patterns` feature gate and can thus emit the request to enable the feature flag, while also emitting the "inclusive range with no end" diagnostic. There is no intent to allow an `X..=` pattern that I am aware of, so removing the flag request is a strict improvement. The arrival of the `J | K` "or" pattern also enables some odd formations.
Some of the behavior tested for here is derived from experiments in this [Playground](https://play.rust-lang.org/?version=nightly&mode=debug&edition=2018&gist=58777b3c715c85165ac4a70d93efeefc) example, linked at https://github.com/rust-lang/rust/issues/67264#issuecomment-812770692, which may be useful to reference to observe the current behavior more closely.
In addition tests constituting an explanation of the "slicing range patterns" syntax issue are included in this PR.
## Desiderata
The exclusive range patterns and half-open range patterns are fairly strongly requested by many authors, as they make some patterns much more natural to write, but there is disagreement regarding the "closed" exclusive range pattern or the "RangeTo" pattern, especially where it creates "off by one" gaps in the presence of a "catch-all" wildcard case. Also, there are obviously no range analyses in place that will force diagnostics for e.g. highly overlapping matches. I believe these should be warned on, ideally, and I think it would be reasonable to consider such a blocker to stabilizing this feature, but there is no technical issue with the feature as-is from the purely syntactic perspective as such overlapping or missed matches can already be generated today with such a catch-all case. And part of the "point" of the feature, at least from my view, is to make it easier to omit wildcard matches: a pattern with such an "open" match produces an irrefutable match and does not need the wild card case, making it easier to benefit from exhaustiveness checking.
## History
- Implemented:
- Partially via exclusive ranges: https://github.com/rust-lang/rust/pull/35712
- Fully with half-open ranges: https://github.com/rust-lang/rust/pull/67258
- Unresolved Questions:
- The precedence concerns of https://github.com/rust-lang/rust/pull/48501 were considered as likely requiring adjustment but probably wanting a uniform consistent change across all pattern styles, given https://github.com/rust-lang/rust/issues/67264#issuecomment-720711656, but it is still unknown what changes might be desired
- How we want to handle slice patterns in ranges seems to be an open question still, as witnessed in the discussion of this PR!
I checked but I couldn't actually find an RFC for this, and given "approved provisionally by lang team without an RFC", I believe this might require an RFC before it can land? Unsure of procedure here, on account of this being stabilizing a subset of a feature of syntax.
r? `@scottmcm`
Extract attribute name once and match it against symbols that are being
validated, instead of using `Session::check_name` for each symbol
individually.
Assume that all validated attributes are used, instead of marking them
as such, since the attribute check should be exhaustive.
Found with https://github.com/est31/warnalyzer.
Dubious changes:
- Is anyone else using rustc_apfloat? I feel weird completely deleting
x87 support.
- Maybe some of the dead code in rustc_data_structures, in case someone
wants to use it in the future?
- Don't change rustc_serialize
I plan to scrap most of the json module in the near future (see
https://github.com/rust-lang/compiler-team/issues/418) and fixing the
tests needed more work than I expected.
TODO: check if any of the comments on the deleted code should be kept.
ast/hir: Rename field-related structures
I always forget what `ast::Field` and `ast::StructField` mean despite working with AST for long time, so this PR changes the naming to less confusing and more consistent.
- `StructField` -> `FieldDef` ("field definition")
- `Field` -> `ExprField` ("expression field", not "field expression")
- `FieldPat` -> `PatField` ("pattern field", not "field pattern")
Various visiting and other methods working with the fields are renamed correspondingly too.
The second commit reduces the size of `ExprKind` by boxing fields of `ExprKind::Struct` in preparation for https://github.com/rust-lang/rust/pull/80080.
StructField -> FieldDef ("field definition")
Field -> ExprField ("expression field", not "field expression")
FieldPat -> PatField ("pattern field", not "field pattern")
Also rename visiting and other methods working on them.
Change x64 size checks to not apply to x32.
Rust contains various size checks conditional on target_arch = "x86_64", but these checks were never intended to apply to x86_64-unknown-linux-gnux32. Add target_pointer_width = "64" to the conditions.
Rust contains various size checks conditional on target_arch = "x86_64",
but these checks were never intended to apply to
x86_64-unknown-linux-gnux32. Add target_pointer_width = "64" to the
conditions.
