Add has_data_left() to BufRead
This is a continuation of #40747 and also addresses #40745. The problem with the previous PR was that it had "eof" in its method name. This PR uses a more descriptive method name, but I'm open to changing it.
Rely on libc for correct integer types in os/unix/net/ancillary.rs.
This PR is a small maintainability improvement. It simplifies `unix/net/ancillary.rs` in `std` by removing the `cfg_ifs` for casting to the correct integer type, and just rely on libc to define the struct correctly.
Specialize `io::Bytes::size_hint` for more types
Improve the result of `<io::Bytes as Iterator>::size_hint` for some readers. I did not manage to specialize `SizeHint` for `io::Cursor`
Side question: would it be interesting for `io::Read` to have an optional `size_hint` method ?
Linear interpolation
#71016 is a previous attempt at implementation that was closed by the author. I decided to reuse the feature request issue (#71015) as a tracking issue. A member of the rust-lang org will have to edit the original post to be formatted correctly as I am not the issue's original author.
The common name `lerp` is used because it is the term used by most code in a wide variety of contexts; it also happens to be the recently chosen name of the function that was added to C++20.
To ensure symmetry as a method, this breaks the usual ordering of the method from `lerp(a, b, t)` to `t.lerp(a, b)`. This makes the most sense to me personally, and there will definitely be discussion before stabilisation anyway.
Implementing lerp "correctly" is very dififcult even though it's a very common building-block used in all sorts of applications. A good prior reading is [this proposal](http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2018/p0811r2.html#linear-interpolation) for the C++20 lerp which talks about the various guarantees, which I've simplified down to:
1. Exactness: `(0.0).lerp(start, end) == start` and `(1.0).lerp(start, end) == end`
2. Consistency: `anything.lerp(x, x) == x`
3. Monotonicity: once you go up don't go down
Fun story: the version provided in that proposal, from what I understand, isn't actually monotonic.
I messed around with a *lot* of different lerp implementations because I kind of got a bit obsessed and I ultimately landed on one that uses the fused `mul_add` instruction. Floating-point lerp lore is hard to come by, so, just trust me when I say that this ticks all the boxes. I'm only 90% certain that it's monotonic, but I'm sure that people who care deeply about this will be there to discuss before stabilisation.
The main reason for using `mul_add` is that, in general, it ticks more boxes with fewer branches to be "correct." Although it will be slower on architectures without the fused `mul_add`, that's becoming more and more rare and I have a feeling that most people who will find themselves needing `lerp` will also have an efficient `mul_add` instruction available.
Rename IoSlice(Mut)::advance to advance_slice and add IoSlice(Mut)::advance
Also changes the signature of `advance_slice` to accept a `&mut &mut [IoSlice]`, not returning anything. This will better match the `IoSlice::advance` function.
Updates https://github.com/rust-lang/rust/issues/62726.
Link reference in `dyn` keyword documentation
The "read more" sentence formatted "object safety" as inline code
instead of providing a link to more information. This PR adds a link
to the Reference about this matter, as well as the page regarding trait
objects.
---
We could also put these links in the very first line (instead of the link to the
Book) and in the first paragraph which mentions the "object safe" requirement.
Personally, I think it's good to keep the link to the Book up-front as it's more
accessible than the Reference.
optimize Eq implementation for paths
Filesystems generally have a tree-ish structure which means paths are more likely to share a prefix than a suffix. Absolute paths are especially prone to share long prefixes.
quick benchmark consisting of a search through through a vec containing the absolute paths of all (1850) files in `compiler/`:
```
# old
test path::tests::bench_path_cmp ... bench: 227,407 ns/iter (+/- 2,162)
# new
test path::tests::bench_path_cmp ... bench: 64,976 ns/iter (+/- 1,142)
```
Remove `Ipv6Addr::is_unicast_site_local`
Removes the unstable method `Ipv6Addr::is_unicast_site_local`, see also #85604 where I have tried to summarize related discussion so far.
Unicast site-local addresses (`fec0::/10`) were deprecated in [IETF RFC #3879](https://datatracker.ietf.org/doc/html/rfc3879), see also [RFC #4291 Section 2.5.7](https://datatracker.ietf.org/doc/html/rfc4291#section-2.5.7). Any new implementation must no longer support the special behaviour of site-local addresses. This is mentioned in the docs of `is_unicast_site_local` and already implemented in `is_unicast_global`, which considers addresses in `fec0::/10` to have global scope, thus overlapping with `is_unicast_site_local`.
Given that RFC #3879 was published in 2004, long before Rust existed, and it is specified that any new implementation must no longer support the special behaviour of site-local addresses, I don't see how a user would ever have a need for `is_unicast_site_local`. It is also confusing that currently both `is_unicast_site_local` and `is_unicast_global` can be `true` for an address, but an address can actually only have a single scope. The deprecating RFC mentions that Site-Local scope was confusing to work with and that the classification of an address as either Link-Local or Global better matches the mental model of users.
There has been earlier discussion of removing `is_unicast_site_local` (https://github.com/rust-lang/rust/pull/60145#issuecomment-485970669) which decided against it, but that had the incorrect assumption that the method was already stable; it is not. (This confusion arose from the placement of the unstable attribute on the entire module, instead of on individual methods, resolved in #85672)
r? `@joshtriplett` as reviewer of all the related PRs
Stabilize {std, core}::prelude::rust_*.
This stabilizes the `{core, std}::prelude::{rust_2015, rust_2018, rust_2021}` modules.
The usage of these modules as the prelude in those editions was already stabilized. This just stabilizes the modules themselves, making it possible for a user to explicitly refer to them.
Tracking issue: https://github.com/rust-lang/rust/issues/85684
FCP on the RFC that included this finished here: https://github.com/rust-lang/rfcs/pull/3114#issuecomment-840577395
Add functions `Duration::try_from_secs_{f32, f64}`
These functions allow constructing a Duration from a floating point value that could be out of range without panicking.
Tracking issue: #83400
Explain non-dropped sender recv in docs
Original senders that are still hanging around could cause
Receiver::recv to not block since this is a potential footgun
for beginners, clarify more on this in the docs for readers to
be aware about it.
Maybe it would be better to show an example of the pattern where `drop(tx)` is used when it is being cloned multiple times? Although I have seen it in quite a few articles but I am surprised that this part is not very clear with the current words without careful reading.
> If the corresponding Sender has disconnected, or it disconnects while this call is blocking, this call will wake up and return Err to indicate that no more messages can ever be received on this channel. However, since channels are buffered, messages sent before the disconnect will still be properly received.
Some words there may seemed similar if I carefully read and relate it but if I am new, I probably does not know "drop" makes it "disconnected". So I mention the words "drop" and "alive" to make it more relatable to lifetime.
Original senders that are still hanging around could cause
Receiver::recv to not block since this is a potential footgun
for beginners, clarify more on this in the docs for readers to
be aware about it.
Fix minor tidbits in sender recv doc
Co-authored-by: Dylan DPC <dylan.dpc@gmail.com>
Add example for unbounded receive loops in doc
Show the drop(tx) pattern, based on tokio docs
https://tokio-rs.github.io/tokio/doc/tokio/sync/index.html
Fix example code for drop sender recv
Fix wording in sender docs
Co-authored-by: Josh Triplett <josh@joshtriplett.org>
Updated code examples and wording in move keyword documentation
Had a conversation with someone on the Rust Discord who was confused by the move keyword documentation. Some of the wording is odd sounding ("owned by value" - what else can something be owned by?). Also, some of the examples used Copy types when demonstrating move, leading to variables still being accessible in the outer scope after the move, contradicting the examples' comments.
I changed the move keyword documentation a bit, removing that odd wording and changing all the examples to use non-Copy types
Multiple improvements to RwLocks
This PR replicates #77147, #77380 and #84650 on RWLocks :
- Split `sys_common::RWLock` in `StaticRWLock` and `MovableRWLock`
- Unbox rwlocks on some platforms (Windows, Wasm and unsupported)
- Simplify `RwLock::into_inner`
Notes to reviewers :
- For each target, I copied `MovableMutex` to guess if `MovableRWLock` should be boxed.
- ~A comment says that `StaticMutex` is not re-entrant, I don't understand why and I don't know whether it applies to `StaticRWLock`.~
r? `@m-ou-se`
Filesystems generally have a tree-ish structure which means
paths are more likely to share a prefix than a suffix. Absolute paths
are especially prone to share long prefixes.
Forwarding implementation for Seek trait's stream_position method
Forwarding implementations for `Seek` trait's `stream_position` were missed when it was stabilized in `1.51.0`
Add `Ipv6Addr::is_unicast`
Adds an unstable utility method `Ipv6Addr::is_unicast` under the feature flag `ip` (tracking issue: #27709).
Added for completeness with the other unicast methods (see also https://github.com/rust-lang/rust/issues/85604#issuecomment-848220455) and opposite of `is_multicast`.
Fix documentation style inconsistencies for IP addresses
Pulled out of #85655 as it is unrelated. Fixes some inconsistencies in the docs for IP addresses:
- Currently some addresses are backticked, some are not, this PR backticks everything consistently. (looks better imo)
- Lowercase hex-literals are used when writing addresses.
The "read more" sentence formatted "object safety" as inline code
instead of providing a link to more information. This PR adds a link
to the Reference about this matter, as well as the page regarding trait
objects.
Prior to this patch, the default panic message (resulting from calling
`panic_any(42);` for example), would print the following error message:
```
thread 'main' panicked at 'Box<Any>', ...
```
However, this should be `Box<dyn Any>` instead.
Possible errors when accessing file metadata are platform specific
In particular the `is_dir`, `is_file` and `exists` functions suggests that querying a file requires querying the directory. On Windows this is not normally true.
r? `@m-ou-se`
rustdoc: link to stable/beta docs consistently in documentation
This is an alternative to https://github.com/rust-lang/rust/pull/84941 which fixes the problem consistently by linking to stable/beta for *all* items, not just for primitives.
## User-facing changes
- Intra-doc links to primitives that currently go to rust-lang.org/nightly/std/primitive.x.html will start going to channel that rustdoc was built with. Nightly will continue going to /nightly; Beta will link to /beta; stable compilers will link to /1.52.1 (or whatever version they were built as).
- Cross-crate links from std to core currently go to /nightly unconditionally. They will start going to /1.52.0 on stable channels (but remain the same on nightly channels).
- Intra-crate links from std to std (or core to core) currently go to the same URL they are hosted at; they will continue to do so. Notably, this is different from everything else because it can preserve the distinction between /stable and /1.52.0 by using relative links.
Note that "links" includes both intra-doc links and rustdoc's own
automatically generated hyperlinks.
## Implementation changes
- Update the testsuite to allow linking to /beta and /1.52.1 in docs
- Use an html_root_url for the standard library that's dependent on the channel
This avoids linking to nightly docs on stable.
- Update rustdoc to use channel-dependent links for primitives from an
unknown crate
- Set DOC_RUST_LANG_ORG_CHANNEL from bootstrap to ensure it's in sync
- Include doc.rust-lang.org in the channel
cc Mark-Simulacrum - I know [you were dubious about this in the past](https://rust-lang.zulipchat.com/#narrow/stream/122651-general/topic/Rustdoc.20unconditionally.20links.20to.20nightly.20libstd.20docs/near/231223124), but I'm not quite sure why? I see this as "just a bugfix", I don't know why rustdoc should unconditionally link to nightly.
cc dtolnay who commented in https://github.com/rust-lang/rust/issues/30693:
> I would welcome a PR to solve this permanently if anyone has ideas for how. I don't believe we need an RFC.
Fixes https://github.com/rust-lang/rust/issues/30693 (note that issue is marked as feature-accepted, although I don't see where it was discussed).
## User-facing changes
- Intra-doc links to primitives that currently go to rust-lang.org/nightly/std/primitive.x.html will start going to channel that rustdoc was built with. Nightly will continue going to /nightly; Beta will link to /beta; stable compilers will link to /1.52.1 (or whatever version they were built as).
- Cross-crate links from std to core currently go to /nightly unconditionally. They will start going to /1.52.0 on stable channels (but remain the same on nightly channels).
- Intra-crate links from std to std (or core to core) currently go to the same URL they are hosted at; they will continue to do so. Notably, this is different from everything else because it can preserve the distinction between /stable and /1.52.0 by using relative links.
Note that "links" includes both intra-doc links and rustdoc's own
automatically generated hyperlinks.
## Implementation changes
- Update the testsuite to allow linking to /beta and /1.52.1 in docs
- Use an html_root_url for the standard library that's dependent on the channel
This avoids linking to nightly docs on stable.
- Update rustdoc to use channel-dependent links for primitives from an
unknown crate
- Set DOC_RUST_LANG_ORG_CHANNEL from bootstrap to ensure it's in sync
- Include doc.rust-lang.org in the channel
Support Android ndk versions `r23-beta3` and up
Since android ndk version `r23-beta3`, `libgcc` has been replaced with `libunwind`. This moves the linking of `libgcc`/`libunwind` into the `unwind` crate where we check if the system compiler can find `libunwind` and fall back to `libgcc` if needed.
