Mark `proc_macro_decls_static` as always used
This would have avoided a bug in https://github.com/rust-lang/rust/pull/104860.
In practice this shouldn't matter since nothing uses the query other than the `dead_code` lint, but this isn't documented as an internal-only query so it seems nice for it to be accurate. I think for `dead_code` it doesn't matter because the relevant code is generated by `rustc_builtin_macros` and isn't linted.
I think `@tmiasko` or `@bjorn3` would be a good reviewer?
r? `@tmiasko`
This would have avoided a bug in https://github.com/rust-lang/rust/pull/104860.
In practice this shouldn't matter since nothing uses the query other than the `dead_code` lint,
but this isn't documented as an internal-only query so it seems nice for it to be accurate.
I think for `dead_code` it doesn't matter because the relevant code is generated by `rustc_builtin_macros` and isn't linted.
Remove `token::Lit` from `ast::MetaItemLit`.
Currently `ast::MetaItemLit` represents the literal kind twice. This PR removes that redundancy. Best reviewed one commit at a time.
r? `@petrochenkov`
compiler: remove unnecessary imports and qualified paths
Some of these imports were necessary before Edition 2021, others were already in the prelude.
I hope it's fine that this PR is so spread-out across files :/
This migrates everything but the `mbe` and `proc_macro` modules. It also
contains a few cleanups and drive-by/accidental diagnostic improvements
which can be seen in the diff for the UI tests.
Shrink `rustc_parse_format::Piece`
This makes both variants closer together in size (previously they were different by 208 bytes -- 16 vs 224). This may make things worse, but it's worth a try.
r? `@nnethercote`
This makes both variants closer together in size (previously they were
different by 208 bytes -- 16 vs 224). This may make things worse, but
it's worth a try.
Add `type_ascribe!` macro as placeholder syntax for type ascription
This makes it still possible to test the internal semantics of type ascription even once the `:`-syntax is removed from the parser. The macro now gets used in a bunch of UI tests that test the semantics and not syntax of type ascription.
I might have forgotten a few tests but this should hopefully be most of them. The remaining ones will certainly be found once type ascription is removed from the parser altogether.
Part of #101728
rustc_ast_lowering: Stop lowering imports into multiple items
Lower them into a single item with multiple resolutions instead.
This also allows to remove additional `NodId`s and `DefId`s related to those additional items.
`token::Lit` contains a `kind` field that indicates what kind of literal
it is. `ast::MetaItemLit` currently wraps a `token::Lit` but also has
its own `kind` field. This means that `ast::MetaItemLit` encodes the
literal kind in two different ways.
This commit changes `ast::MetaItemLit` so it no longer wraps
`token::Lit`. It now contains the `symbol` and `suffix` fields from
`token::Lit`, but not the `kind` field, eliminating the redundancy.
This is required to distinguish between cooked and raw byte string
literals in an `ast::LitKind`, without referring to an adjacent
`token::Lit`. It's a prerequisite for the next commit.
Lower them into a single item with multiple resolutions instead.
This also allows to remove additional `NodId`s and `DefId`s related to those additional items.
There is code for converting `Attribute` (syntactic) to `MetaItem`
(semantic). There is also code for the reverse direction. The reverse
direction isn't really necessary; it's currently only used when
generating attributes, e.g. in `derive` code.
This commit adds some new functions for creating `Attributes`s directly,
without involving `MetaItem`s: `mk_attr_word`, `mk_attr_name_value_str`,
`mk_attr_nested_word`, and
`ExtCtxt::attr_{word,name_value_str,nested_word}`.
These new methods replace the old functions for creating `Attribute`s:
`mk_attr_inner`, `mk_attr_outer`, and `ExtCtxt::attribute`. Those
functions took `MetaItem`s as input, and relied on many other functions
that created `MetaItems`, which are also removed: `mk_name_value_item`,
`mk_list_item`, `mk_word_item`, `mk_nested_word_item`,
`{MetaItem,MetaItemKind,NestedMetaItem}::token_trees`,
`MetaItemKind::attr_args`, `MetaItemLit::{from_lit_kind,to_token}`,
`ExtCtxt::meta_word`.
Overall this cuts more than 100 lines of code and makes thing simpler.
In `Expander::expand` the code currently uses `mk_attr_outer` to convert
a `MetaItem` to an `Attribute`, and then follows that with
`meta_item_list` which converts back. This commit avoids the unnecessary
conversions.
There was one wrinkle: the existing conversions caused the bogus `<>` on
`Default<>` to be removed. With the conversion gone, we get a second
error message about the `<>`. This is a rare case, so I think it
probably doesn't matter much.
`check_builtin_attribute` calls `parse_meta` to convert an `Attribute`
to a `MetaItem`, which it then checks. However, many callers of
`check_builtin_attribute` start with a `MetaItem`, and then convert it
to an `Attribute` by calling `cx.attribute(meta_item)`. This `MetaItem`
to `Attribute` to `MetaItem` conversion is silly.
This commit adds a new function `check_builtin_meta_item`, which can be
called instead from these call sites. `check_builtin_attribute` also now
calls it. The commit also renames `check_meta` as `check_attr` to better
match its arguments.
Use `as_deref` in compiler (but only where it makes sense)
This simplifies some code :3
(there are some changes that are not exacly `as_deref`, but more like "clever `Option`/`Result` method use")
`MacArgs` is an enum with three variants: `Empty`, `Delimited`, and `Eq`. It's
used in two ways:
- For representing attribute macro arguments (e.g. in `AttrItem`), where all
three variants are used.
- For representing function-like macros (e.g. in `MacCall` and `MacroDef`),
where only the `Delimited` variant is used.
In other words, `MacArgs` is used in two quite different places due to them
having partial overlap. I find this makes the code hard to read. It also leads
to various unreachable code paths, and allows invalid values (such as
accidentally using `MacArgs::Empty` in a `MacCall`).
This commit splits `MacArgs` in two:
- `DelimArgs` is a new struct just for the "delimited arguments" case. It is
now used in `MacCall` and `MacroDef`.
- `AttrArgs` is a renaming of the old `MacArgs` enum for the attribute macro
case. Its `Delimited` variant now contains a `DelimArgs`.
Various other related things are renamed as well.
These changes make the code clearer, avoids several unreachable paths, and
disallows the invalid values.
The current approach to field accesses in derived code:
- Normal case: `&self.0`
- In a packed struct that derives `Copy`: `&{self.0}`
- In a packed struct that doesn't derive `Copy`: `let Self(ref x) = *self`
The `let` pattern used in the third case is equivalent to the simpler
field access in the first case. This commit changes the third case to
use a field access.
The commit also combines two boolean arguments (`is_packed` and
`always_copy`) into a single field (`copy_fields`) earlier, to save
passing both around.
Instead of `ast::Lit`.
Literal lowering now happens at two different times. Expression literals
are lowered when HIR is crated. Attribute literals are lowered during
parsing.
This commit changes the language very slightly. Some programs that used
to not compile now will compile. This is because some invalid literals
that are removed by `cfg` or attribute macros will no longer trigger
errors. See this comment for more details:
https://github.com/rust-lang/rust/pull/102944#issuecomment-1277476773
Delay `include_bytes` to AST lowering
Hopefully addresses #65818.
This PR introduces a new `ExprKind::IncludedBytes` which stores the path and bytes of a file included with `include_bytes!()`. We can then create a literal from the bytes during AST lowering, which means we don't need to escape the bytes into valid UTF8 which is the cause of most of the overhead of embedding large binary blobs.
Add the `#[derive_const]` attribute
Closes#102371. This is a minimal patchset for the attribute to work. There are no restrictions on what traits this attribute applies to.
r? `````@oli-obk`````
`#[test]`: Point at return type if `Termination` bound is unsatisfied
Together with #103142 (already merged) this fully fixes#50291.
I don't consider my current solution of changing a few spans “here and there” very clean since the
failed obligation is a `FunctionArgumentObligation` and we point at a type instead of a function argument.
If you agree with me on this point, I can offer to keep the spans of the existing nodes and instead inject
`let _: AssertRetTyIsTermination<$ret_ty>;` (type to be defined in `libtest`) similar to `AssertParamIsEq` etc.
used by some built-in derive-macros.
I haven't tried that approach yet though and cannot promise that it would actually work out or
be “cleaner” for that matter.
````@rustbot```` label A-libtest A-diagnostics
r? ````@estebank````
