Fix trait solving ICEs
- Selection candidates that are known to be applicable are preferred
over candidates that are not.
- Don't ICE if a projection/object candidate is no longer applicable
(this can happen due to cycles in normalization)
- Normalize supertraits when finding trait object candidates
Closes#77653Closes#77656
r? `@nikomatsakis`
Make fewer types generic over QueryContext
While trying to refactor `rustc_query_system::query::QueryContext` to make it dyn-safe, I noticed some smaller things:
* QueryConfig doesn't need to be generic over QueryContext
* ~~The `kind` field on QueryJobId is unused~~
* Some unnecessary where clauses
* Many types in `job.rs` where generic over `QueryContext` but only needed `QueryContext::Query`.
If handle_cycle_error() could be refactored to not take `error: CycleError<CTX::Query>`, all those bounds could be removed as well.
Changing `find_cycle_in_stack()` in job.rs to not take a `tcx` argument is the only functional change here. Everything else is just updating type signatures. (aka compile-error driven development ^^)
~~Currently there is a weird bug where memory usage suddenly skyrockets when running UI tests. I'll investigate that tomorrow.
A perf run probably won't make sense before that is fixed.~~
EDIT: `kind` actually is used by `Eq`, and re-adding it fixed the memory issue.
Use `DroplessArena` where we know the type doesn't need drop
This PR uses a single `DroplessArena` in resolve instead of three separate `TypedArena`s.
`DroplessArena` checks that the type indeed doesn't need drop, so in case the types change, this will result in visible failures.
Rollup of 10 pull requests
Successful merges:
- #77420 (Unify const-checking structured errors for `&mut` and `&raw mut`)
- #77554 (Support signed integers and `char` in v0 mangling)
- #77976 (Mark inout asm! operands as used in liveness pass)
- #78009 (Haiku: explicitly set CMAKE_SYSTEM_NAME when cross-compiling)
- #78084 (Greatly improve display for small mobile devices screens)
- #78155 (Fix two small issues in compiler/rustc_lint/src/types.rs)
- #78156 (Fixed build failure of `rustfmt`)
- #78172 (Add test case for #77062)
- #78188 (Add tracking issue number for pin_static_ref)
- #78200 (Add `ControlFlow::is_{break,continue}` methods)
Failed merges:
r? `@ghost`
* compiler docs
* Don't format list as part of a code block
* Clean up some other formatting
* rustdoc book
* Update CommonMark spec version to latest (0.28 -> 0.29)
* Clean up some various wording and formatting
Mark inout asm! operands as used in liveness pass
Variables used in `inout` operands in inline assembly (that is, they're used as both input and output to some arbitrary assembly instruction) are being marked as read and written, but are not marked as being used in the RWU table during the liveness pass. This can result in such expressions triggering an unused variable lint warning. This is incorrect behavior- reads without uses are currently only used for compound assignments. We conservatively assume that an `inout` operand is being read and used in the context of the assembly instruction.
Closes#77915
Support signed integers and `char` in v0 mangling
Likely we want more tests, to check the output is correct too: however, I wasn't sure what kind of test we needed, so I just added one similar to that added in https://github.com/rust-lang/rust/pull/77452 for now.
r? @eddyb
This allows us to avoid synthesizing tokens in `prepend_attr`, since we
have the original tokens available.
We still need to synthesize tokens when expanding `cfg_attr`,
but this is an unavoidable consequence of the syntax of `cfg_attr` -
the user does not supply the `#` and `[]` tokens that a `cfg_attr`
expands to.
Calculate visibilities once in resolve
Then use them through a query based on resolver outputs.
Item visibilities were previously calculated in three places - initially in `rustc_resolve`, then in `rustc_privacy` during type privacy checkin, and then in `rustc_metadata` during metadata encoding.
The visibility logic is not entirely trivial, especially for things like constructors or enum variants, and all of it was duplicated.
This PR deduplicates all the visibility calculations, visibilities are determined once during early name resolution and then stored in `ResolverOutputs` and are later available through `tcx` as a query `tcx.visibility(def_id)`.
(This query existed previously, but only worked for other crates.)
Some special cases (e.g. visibilities for closure types, which are needed for type privacy checking) are not processed in resolve, but deferred and performed directly in the query instead.
Cycles in normalization can cause evaluations to change from Unknown to
Err. This means that some selection that were applicable no longer are.
To avoid this:
* Selection candidates that are known to be applicable are prefered
over candidates that are not.
* We don't ICE if a candidate is no longer applicable.
allow_internal_unstable is currently used
to side-step feature gate and stability checks.
While it was originally only meant to be used
only on macros, its use was expanded to
const functions.
This commit prepares stricter checks for the usage of allow_internal_unstable (only on macros)
and introduces the rustc_allow_const_fn_unstable attribute for usage on functions.
See rust-lang/rust#69399
Rewrite `collect_tokens` implementations to use a flattened buffer
Instead of trying to collect tokens at each depth, we 'flatten' the
stream as we go allong, pushing open/close delimiters to our buffer
just like regular tokens. One capturing is complete, we reconstruct a
nested `TokenTree::Delimited` structure, producing a normal
`TokenStream`.
The reconstructed `TokenStream` is not created immediately - instead, it is
produced on-demand by a closure (wrapped in a new `LazyTokenStream` type). This
closure stores a clone of the original `TokenCursor`, plus a record of the
number of calls to `next()/next_desugared()`. This is sufficient to reconstruct
the tokenstream seen by the callback without storing any additional state. If
the tokenstream is never used (e.g. when a captured `macro_rules!` argument is
never passed to a proc macro), we never actually create a `TokenStream`.
This implementation has a number of advantages over the previous one:
* It is significantly simpler, with no edge cases around capturing the
start/end of a delimited group.
* It can be easily extended to allow replacing tokens an an arbitrary
'depth' by just using `Vec::splice` at the proper position. This is
important for PR #76130, which requires us to track information about
attributes along with tokens.
* The lazy approach to `TokenStream` construction allows us to easily
parse an AST struct, and then decide after the fact whether we need a
`TokenStream`. This will be useful when we start collecting tokens for
`Attribute` - we can discard the `LazyTokenStream` if the parsed
attribute doesn't need tokens (e.g. is a builtin attribute).
The performance impact seems to be neglibile (see
https://github.com/rust-lang/rust/pull/77250#issuecomment-703960604). There is a
small slowdown on a few benchmarks, but it only rises above 1% for incremental
builds, where it represents a larger fraction of the much smaller instruction
count. There a ~1% speedup on a few other incremental benchmarks - my guess is
that the speedups and slowdowns will usually cancel out in practice.
Improve wording of "cannot multiply" type error
For example, if you had this code:
fn foo(x: i32, y: f32) -> f32 {
x * y
}
You would get this error:
error[E0277]: cannot multiply `f32` to `i32`
--> src/lib.rs:2:7
|
2 | x * y
| ^ no implementation for `i32 * f32`
|
= help: the trait `Mul<f32>` is not implemented for `i32`
However, that's not usually how people describe multiplication. People
usually describe multiplication like how the division error words it:
error[E0277]: cannot divide `i32` by `f32`
--> src/lib.rs:2:7
|
2 | x / y
| ^ no implementation for `i32 / f32`
|
= help: the trait `Div<f32>` is not implemented for `i32`
So that's what this change does. It changes this:
error[E0277]: cannot multiply `f32` to `i32`
--> src/lib.rs:2:7
|
2 | x * y
| ^ no implementation for `i32 * f32`
|
= help: the trait `Mul<f32>` is not implemented for `i32`
To this:
error[E0277]: cannot multiply `i32` by `f32`
--> src/lib.rs:2:7
|
2 | x * y
| ^ no implementation for `i32 * f32`
|
= help: the trait `Mul<f32>` is not implemented for `i32`
The optimization introduces additional uses of the discriminant operand, but
does not ensure that it is still valid to evaluate it or that it still
evaluates to the same value.
Evaluate it once at original position, and store the result in a new temporary.
Drop unneeded `mut`
These parameters don't get modified.
Note that `trailing_comment` is pub and gets exported from `rustc_ast_pretty`. Is that considered to be a stable API? If yes, and you want to reserve the right to modify `self` in `trailing_comment` in the future, that hunk would need to be dropped.
Don't update `entries` in `TypedArena` if T does not need drop
As far as I can tell, `entries` is only used when dropping `TypedArenaChunk`s and their contents. It is already ignored there, if T is not `mem::needs_drop`, this PR just skips updating it's value.
You can see `TypedArenaChunk` ignoring the entry count in L71. The reasoning is similar to what you can find in `DroplessArena`.
r? @oli-obk
Improve `skip_binder` usage during FlagComputation
It looks like there was previously a bug around `ExistentialPredicate::Projection` here, don't know how to best trigger that one to add a regression test though.
Trait predicate ambiguities are not always in `Self`
When reporting ambiguities in trait predicates, the compiler incorrectly assumed the ambiguity was always in the type the trait should be implemented on, and never the generic parameters of the trait. This caused silly suggestions for predicates like `<KnownType as Trait<_>>`, such as giving explicit types to completely unrelated variables that happened to be of type `KnownType`.
This also reverts #73027, which worked around this issue in some cases and does not appear to be necessary any more.
fixes#77982fixes#78055
This optimization can result in unsoundness, because it introduces
additional uses of a place holding the discriminant value without
ensuring that it is valid to do so.
Instead of trying to collect tokens at each depth, we 'flatten' the
stream as we go allong, pushing open/close delimiters to our buffer
just like regular tokens. One capturing is complete, we reconstruct a
nested `TokenTree::Delimited` structure, producing a normal
`TokenStream`.
The reconstructed `TokenStream` is not created immediately - instead, it is
produced on-demand by a closure (wrapped in a new `LazyTokenStream` type). This
closure stores a clone of the original `TokenCursor`, plus a record of the
number of calls to `next()/next_desugared()`. This is sufficient to reconstruct
the tokenstream seen by the callback without storing any additional state. If
the tokenstream is never used (e.g. when a captured `macro_rules!` argument is
never passed to a proc macro), we never actually create a `TokenStream`.
This implementation has a number of advantages over the previous one:
* It is significantly simpler, with no edge cases around capturing the
start/end of a delimited group.
* It can be easily extended to allow replacing tokens an an arbitrary
'depth' by just using `Vec::splice` at the proper position. This is
important for PR #76130, which requires us to track information about
attributes along with tokens.
* The lazy approach to `TokenStream` construction allows us to easily
parse an AST struct, and then decide after the fact whether we need a
`TokenStream`. This will be useful when we start collecting tokens for
`Attribute` - we can discard the `LazyTokenStream` if the parsed
attribute doesn't need tokens (e.g. is a builtin attribute).
The performance impact seems to be neglibile (see
https://github.com/rust-lang/rust/pull/77250#issuecomment-703960604). There is a
small slowdown on a few benchmarks, but it only rises above 1% for incremental
builds, where it represents a larger fraction of the much smaller instruction
count. There a ~1% speedup on a few other incremental benchmarks - my guess is
that the speedups and slowdowns will usually cancel out in practice.
Rollup of 4 pull requests
Successful merges:
- #77877 (Use `try{}` in `try_fold` to decouple iterators in the library from `Try` details)
- #78089 (Fix issue with specifying generic arguments for primitive types)
- #78099 (Add missing punctuation)
- #78103 (Add link to rustdoc book in rustdoc help popup)
Failed merges:
r? `@ghost`
Try to make ObligationForest more efficient
This PR tries to decrease the number of allocations in ObligationForest, as well as moves some cold path code to an uninlined function.
normalize substs while inlining
fixes#68347 or more precisely, this fixes the same ICE in rust analyser as veloren is pinned to a specific nightly
and had an error with the current one.
I didn't look into creating an MVCE here as that seems fairly annoying, will spend a few minutes doing so rn. (failed)
r? `@eddyb` cc `@bjorn3`
Make sure arenas don't allocate bigger than HUGE_PAGE
Right now, arenas allocate based on the size of the last chunk. It is possible for a `grow` call to allocate a chunk that is not a multiple of `PAGE`, and this size is doubled for each subsequent allocation. This means, instead of `HUGE_PAGE`, the biggest page possible is actually unknown.
This change fixes this, and also removes an unnecessary checked multiplication. It is still possible to allocate bigger than `HUGE_PAGE` pages, but this will only happen as many times as absolutely necessary.
Make set_span take mut self
This was a mistake in https://github.com/rust-lang/rust/pull/77614
It's not a _huge_ deal, because backends can always implement this with interior mutability, but it's nice to avoid interior mutability when possible. For context, the `set_source_location` method, called alongside `set_span`, also takes `&mut self`.
r? `@eddyb`
For example, if you had this code:
fn foo(x: i32, y: f32) -> f32 {
x * y
}
You would get this error:
error[E0277]: cannot multiply `f32` to `i32`
--> src/lib.rs:2:7
|
2 | x * y
| ^ no implementation for `i32 * f32`
|
= help: the trait `Mul<f32>` is not implemented for `i32`
However, that's not usually how people describe multiplication. People
usually describe multiplication like how the division error words it:
error[E0277]: cannot divide `i32` by `f32`
--> src/lib.rs:2:7
|
2 | x / y
| ^ no implementation for `i32 / f32`
|
= help: the trait `Div<f32>` is not implemented for `i32`
So that's what this change does. It changes this:
error[E0277]: cannot multiply `f32` to `i32`
--> src/lib.rs:2:7
|
2 | x * y
| ^ no implementation for `i32 * f32`
|
= help: the trait `Mul<f32>` is not implemented for `i32`
To this:
error[E0277]: cannot multiply `i32` by `f32`
--> src/lib.rs:2:7
|
2 | x * y
| ^ no implementation for `i32 * f32`
|
= help: the trait `Mul<f32>` is not implemented for `i32`
Rollup of 7 pull requests
Successful merges:
- #75802 (resolve: Do not put nonexistent crate `meta` into prelude)
- #76607 (Modify executable checking to be more universal)
- #77851 (BTreeMap: refactor Entry out of map.rs into its own file)
- #78043 (Fix grammar in note for orphan-rule error [E0210])
- #78048 (Suggest correct place to add `self` parameter when inside closure)
- #78050 (Small CSS cleanup)
- #78059 (Set `MDBOOK_OUTPUT__HTML__INPUT_404` on linkchecker)
Failed merges:
r? `@ghost`
Suggest correct place to add `self` parameter when inside closure
It would incorrectly suggest adding it as a parameter to the closure instead of the containing function.
[For example](https://play.rust-lang.org/?version=stable&mode=debug&edition=2018&gist=1936bcd1e5f981573386e0cee985c3c0):
```
help: add a `self` receiver parameter to make the associated `fn` a method
|
5 | let _ = || self&self;
| ^^^^^
```
`DiagnosticMetadata.current_function` is only used for these messages so tweaking its behavior should be ok.
Fix grammar in note for orphan-rule error [E0210]
Fixes the grammar in the error note for [E0210] from:
_"= note: implementing a foreign trait is only possible if at least one of the types for which **is it** implemented is local"_
to:
_"= note: implementing a foreign trait is only possible if at least one of the types for which **it is** implemented is local"_
The content of this commit is the result of running the following command at the repository root:
`find . \( -type d -name .git -prune \) -o -type f -print0 | xargs -0 sed -i 's/which is it implemented/which it is implemented/g'`
resolve: Do not put nonexistent crate `meta` into prelude
Before the 2018 edition release there was some vague suggestion about adding a crate named `meta` to the standard distribution.
On this basis the name `meta` was "partially reserved" by putting `meta` into extern prelude (this means importing something named `meta` will result in an ambiguity error, for example).
This only caused confusion so far, and two years later there are no specific plans to add such crate.
If some standard crate (named `meta` or not) is added in the future, then cargo will hopefully already have ability to put it into extern prelude explicitly through `Cargo.toml`.
Otherwise, it could be added to extern prelude by the compiler at edition boundary.
Closes https://github.com/rust-lang/rust/issues/73948
Use rebind instead of Binder::bind when possible
These are really only the easy places. I just searched for `Binder::bind` and replaced where it straightforward.
r? `@lcnr`
cc. `@nikomatsakis`
Set .llvmbc and .llvmcmd sections as allocatable
This marks both sections as allocatable rather than excluded, which matches what
clang does with the equivalent `-fembed-bitcode` flag.
Permit uninhabited enums to cast into ints
This essentially reverts part of #6204; it is unclear why that [commit](c0f587de34) was introduced, and I suspect no one remembers.
The changed code was only called from casting checks and appears to not affect any callers of that code (other than permitting this one case).
Fixes#75647.
instrument-coverage: try our best to not ICE
instrument-coverage was ICEing for me on some code, in particular code
that had devirtualized paths from standard library. Instrument coverage
probably has no bussiness dictating which paths are valid and which
aren't so just feed it everything and whatever and let tooling deal with
other stuff.
For example, with this commit we can generate coverage hitpoints for
these interesting paths:
* `/rustc/.../library/core/lib.rs` – non-devirtualized path for libcore
* `/home/.../src/library/core/lib.rs` – devirtualized version of above
* `<inline asm>`, `<anon>` and many similar synthetic paths
Even if those paths somehow get to the instrumentation pass, I'd much
rather get hits for these weird paths and hope some of them work (as
would be the case for devirtualized path to libcore), rather than have
compilation fail entirely.
Deny broken intra-doc links in linkchecker
Since rustdoc isn't warning about these links, check for them manually.
This also fixes the broken links that popped up from the lint.
Suggest minimal subset features in `incomplete_features` lint
This tells users that we have a minimal subset feature of it and they can fix the lint warning without allowing it.
The wording improvement is helpful :)
Fixes#77913
resolve: further improvements to "try using the enum's variant" diagnostic
Follow-up on https://github.com/rust-lang/rust/pull/77341#issuecomment-702738281.
This PR improves the diagnostic modified in #77341 to suggest not only those variants which do not have fields, but those with fields (by suggesting with placeholders). In addition, the wording of the tuple-variant-only case is improved slightly.
I've not made further changes to the tuple-variant-only case (e.g. to only suggest variants with the correct number of fields) because I don't think I have enough information to do so reliably (e.g. in the case where there is an attempt to construct a tuple variant, I have no information on how many fields were provided; and in the case of pattern matching, I only have a slice of spans and would need to check for things like `..` in those spans, which doesn't seem worth it).
r? @estebank
stabilize union with 'ManuallyDrop' fields and 'impl Drop for Union'
As [discussed by @SimonSapin and @withoutboats](https://github.com/rust-lang/rust/issues/55149#issuecomment-634692020), this PR proposes to stabilize parts of the `untagged_union` feature gate:
* It will be possible to have a union with field type `ManuallyDrop<T>` for any `T`.
* While at it I propose we also stabilize `impl Drop for Union`; to my knowledge, there are no open concerns around this feature.
In the RFC discussion, we also talked about allowing `&mut T` as another non-`Copy` non-dropping type, but that felt to me like an overly specific exception so I figured we'd wait if there is actually any use for such a special case.
Some things remain unstable and still require the `untagged_union` feature gate:
* Union with fields that do not drop, are not `Copy`, and are not `ManuallyDrop<_>`. The reason to not stabilize this is to avoid semver concerns around libraries adding `Drop` implementations later. (This is already not fully semver compatible as, to my knowledge, the borrow checker will exploit the non-dropping nature of any type, but it seems prudent to avoid further increasing the amount of trouble adding an `impl Drop` can cause.)
Due to this, quite a few tests still need the `untagged_union` feature, but I think the ones where I could remove the feature flag provide good test coverage for the stable part.
Cc @rust-lang/lang
instrument-coverage was ICEing for me on some code, in particular code
that had devirtualized paths from standard library. Instrument coverage
probably has no bussiness dictating which paths are valid and which
aren't so just feed it everything and whatever and let tooling deal with
other stuff.
For example, with this commit we can generate coverage hitpoints for
these interesting paths:
* `/rustc/.../library/core/lib.rs` – non-devirtualized path for libcore
* `/home/.../src/library/core/lib.rs` – devirtualized version of above
* `<inline asm>`, `<anon>` and many similar synthetic paths
Even if those paths somehow get to the instrumentation pass, I'd much
rather get hits for these weird paths and hope some of them work (as
would be the case for devirtualized path to libcore), rather than have
compilation fail entirely.
Prevent miscompilation in trivial loop {}
Ideally, we would want to handle a broader set of cases to fully fix the
underlying bug here. That is currently relatively expensive at compile and
runtime, so we don't do that for now.
Performance results indicate this is not a major regression, if at all, so it should be safe to land.
cc #28728
Remove arena's dependency on `rustc_data_structures`
`rustc_arena` currently has a dependency on `rustc_data_structures` because of a trivial "don't inline me" function. This PR copies that function and removes the dependency.
Create a single source scope for promoteds
A promoted inherits all scopes from the parent body. At the same time,
almost all statements and terminators inside the promoted body so far
refer only to one of those scopes: the outermost one.
Instead of inheriting all scopes, inherit only a single scope
corresponding to the location of the promoted, making sure that there
are no references to other scopes.
rustc_parse: fix spans on cast and range exprs with attrs
Currently the span for cast and range expressions does not include the span of attributes associated to the lhs which is causing some issues for us in rustfmt.
```rust
fn foo() -> i64 {
#[attr]
1u64 as i64
}
fn bar() -> Range<i32> {
#[attr]
1..2
}
```
This corrects the span for cast and range expressions to fully include the span of child nodes
Stabilize move_ref_pattern
# Implementation
- Initially the rule was added in the run-up to 1.0. The AST-based borrow checker was having difficulty correctly enforcing match expressions that combined ref and move bindings, and so it was decided to simplify forbid the combination out right.
- The move to MIR-based borrow checking made it possible to enforce the rules in a finer-grained level, but we kept the rule in place in an effort to be conservative in our changes.
- In #68376, @Centril lifted the restriction but required a feature-gate.
- This PR removes the feature-gate.
Tracking issue: #68354.
# Description
This PR is to stabilize the feature `move_ref_pattern`, which allows patterns
containing both `by-ref` and `by-move` bindings at the same time.
For example: `Foo(ref x, y)`, where `x` is `by-ref`,
and `y` is `by-move`.
The rules of moving a variable also apply here when moving *part* of a variable,
such as it can't be referenced or moved before.
If this pattern is used, it would result in *partial move*, which means that
part of the variable is moved. The variable that was partially moved from
cannot be used as a whole in this case, only the parts that are still
not moved can be used.
## Documentation
- The reference (rust-lang/reference#881)
- Rust by example (rust-lang/rust-by-example#1377)
## Tests
There are many tests, but I think one of the comperhensive ones:
- [borrowck-move-ref-pattern-pass.rs](85fbf49ce0/src/test/ui/pattern/move-ref-patterns/borrowck-move-ref-pattern-pass.rs)
- [borrowck-move-ref-pattern.rs](85fbf49ce0/src/test/ui/pattern/move-ref-patterns/borrowck-move-ref-pattern.rs)
# Examples
```rust
#[derive(PartialEq, Eq)]
struct Finished {}
#[derive(PartialEq, Eq)]
struct Processing {
status: ProcessStatus,
}
#[derive(PartialEq, Eq)]
enum ProcessStatus {
One,
Two,
Three,
}
#[derive(PartialEq, Eq)]
enum Status {
Finished(Finished),
Processing(Processing),
}
fn check_result(_url: &str) -> Status {
// fetch status from some server
Status::Processing(Processing {
status: ProcessStatus::One,
})
}
fn wait_for_result(url: &str) -> Finished {
let mut previous_status = None;
loop {
match check_result(url) {
Status::Finished(f) => return f,
Status::Processing(p) => {
match (&mut previous_status, p.status) {
(None, status) => previous_status = Some(status), // first status
(Some(previous), status) if *previous == status => {} // no change, ignore
(Some(previous), status) => { // Now it can be used
// new status
*previous = status;
}
}
}
}
}
}
```
Before, we would have used:
```rust
match (&previous_status, p.status) {
(Some(previous), status) if *previous == status => {} // no change, ignore
(_, status) => {
// new status
previous_status = Some(status);
}
}
```
Demonstrating *partial move*
```rust
fn main() {
#[derive(Debug)]
struct Person {
name: String,
age: u8,
}
let person = Person {
name: String::from("Alice"),
age: 20,
};
// `name` is moved out of person, but `age` is referenced
let Person { name, ref age } = person;
println!("The person's age is {}", age);
println!("The person's name is {}", name);
// Error! borrow of partially moved value: `person` partial move occurs
//println!("The person struct is {:?}", person);
// `person` cannot be used but `person.age` can be used as it is not moved
println!("The person's age from person struct is {}", person.age);
}
```
mangling: mangle impl params w/ v0 scheme
This PR modifies v0 symbol mangling to include all generic parameters from impl blocks (not just those used in the self type) - an alternative fix to #75326.
```
original:
_RNCNvXCs4fqI2P2rA04_19impl_param_manglingINtB4_3FooppENtNtNtNtCsfnEnqCNU58Z_4core4iter6traits8iterator8Iterator4next0B4_
// |------------ B4_ ----------------|
// _R (N C (N v (X (C ((s 4fqI2p2rA04_) 19impl_param_mangling)) (I (N t B4_ 3Foo) pp E) (N t (N t (N t (N t (C ((s fnEnqCNU58Z_) 4core)) 4iter) 6traits) 8iterator) 8Iterator)) 4next) 0) B4_
modified:
_RNvXINICs4fqI2P2rA04_11issue_753260pppEINtB5_3FooppENtNtNtNtCsfnEnqCNU58Z_4core4iter6traits8iterator8Iterator4nextB5_
// _R (N v (X (I (N I (C ((s 4fqI2P2rA04_) 11issue_75326)) 0) ppp E) (I (N t B5_ 3Foo) pp E) (N t (N t (N t (N t (C ((s fnEnqCNU58Z_) 4core)) 4iter) 6traits) 8iterator) 8Iterator)) 4next) B5_
// | ^ |
// | | |
// | new impl namespace |
```
~~Submitted as a draft as after some discussion w/ @eddyb, I'm going to do some investigation into (yet more alternative) changes to polymorphization that might remove the necessity for this.~~
r? @eddyb
ensure arguments are included in count mismatch span
The current diagnostic isn't very helpful if the function header spans multiple lines. Lines comprising the function signature may be elided to keep the diagnostic short, but these lines are essential to fixing the error. This is made worse when the function has a body, because the last two lines of the span are then dedicated to showing the end of the body, which is irrelevant.
This PR changes the span to be a multispan made up of the header and the the arguments, ensuring they won't be elided. It also discards the function body from the span.
[Old](https://play.rust-lang.org/?version=stable&mode=debug&edition=2018&gist=f92d9f81a8c9416f0f04e4e09923b6d4):
```
error[E0061]: this function takes 6 arguments but 1 argument was supplied
--> src/main.rs:18:5
|
1 | / fn bar(
2 | | a: i32,
3 | | b: i32,
4 | | c: i32,
... |
14 | | println!("{}", f);
15 | | }
| |_- defined here
...
18 | bar(1);
| ^^^ - supplied 1 argument
| |
| expected 6 arguments
```
New:
```
error[E0061]: this function takes 6 arguments but 1 argument was supplied
--> $DIR/not-enough-arguments.rs:28:3
|
LL | bar(1);
| ^^^ - supplied 1 argument
| |
| expected 6 arguments
|
note: function defined here
--> $DIR/not-enough-arguments.rs:9:1
|
LL | / fn bar(
LL | | a: i32,
| | ^^^^^^^
LL | | b: i32,
| | ^^^^^^^
LL | | c: i32,
| | ^^^^^^^
LL | | d: i32,
| | ^^^^^^^
LL | | e: i32,
| | ^^^^^^^
LL | | f: i32,
| | ^^^^^^^
LL | | ) {
| |_^
```
This commit improves the tuple struct case added in rust-lang/rust#77341
so that the context is mentioned in more of the message.
Signed-off-by: David Wood <david@davidtw.co>
This commit improves the diagnostic modified in rust-lang/rust#77341 to
suggest not only those variants which do not have fields, but those with
fields (by suggesting with placeholders).
Signed-off-by: David Wood <david@davidtw.co>
Ideally, we would want to handle a broader set of cases to fully fix the
underlying bug here. That is currently relatively expensive at compile and
runtime, so we don't do that for now.
This commit modifies v0 symbol mangling to include all generic
parameters from impl blocks (not just those used in the self type).
Signed-off-by: David Wood <david@davidtw.co>
This commit adjust `#[rustc_symbol_name]` so that it can be applied to
non-monomorphic functions without producing an ICE.
Signed-off-by: David Wood <david@davidtw.co>
The wrapper type led to tons of target.target
across the compiler. Its ptr_width field isn't
required any more, as target_pointer_width
is already present in parsed form.
Preparation for a subsequent change that replaces
rustc_target::config::Config with its wrapped Target.
On its own, this commit breaks the build. I don't like making
build-breaking commits, but in this instance I believe that it
makes review easier, as the "real" changes of this PR can be
seen much more easily.
Result of running:
find compiler/ -type f -exec sed -i -e 's/target\.target\([)\.,; ]\)/target\1/g' {} \;
find compiler/ -type f -exec sed -i -e 's/target\.target$/target/g' {} \;
find compiler/ -type f -exec sed -i -e 's/target.ptr_width/target.pointer_width/g' {} \;
./x.py fmt
Rename target_pointer_width to pointer_width because it is already
member of the Target struct.
The compiler supports only three valid values for target_pointer_width:
16, 32, 64. Thus it can safely be turned into an int.
This means less allocations and clones as well as easier handling of the type.
Also change target_pointer_width to pointer_width.
Preparation for a subsequent type change of
target_pointer_width to an integer together with a rename
to pointer_width.
On its own, this commit breaks the build. I don't like making
build-breaking commits, but in this instance I believe that it
makes review easier, as the "real" changes of this PR can be
seen much more easily.
Result of running:
find compiler/rustc_target/src/spec/ -type f -exec sed -i -e 's/target_pointer_width: "\(.*\)"\..*,/pointer_width: \1,/g' {} \;
Replace tuple of infer vars for upvar_tys with single infer var
This commit allows us to decide the number of captures required after
completing capture ananysis, which is required as part of implementing
RFC-2229.
closes https://github.com/rust-lang/project-rfc-2229/issues/4
r? `@nikomatsakis`
Remove unused code
Rustc has a builtin lint for detecting unused code inside a crate, but when an item is marked `pub`, the code, even if unused inside the entire workspace, is never marked as such. Therefore, I've built [warnalyzer](https://github.com/est31/warnalyzer) to detect unused items in a cross-crate setting.
Closes https://github.com/est31/warnalyzer/issues/2
Logically this first eliminates the innermost match by merging the patterns.
Then, in a second step, turns the newly innermost match into a `matches!` call.
Rollup of 8 pull requests
Successful merges:
- #77765 (Add LLVM flags to limit DWARF version to 2 on BSD)
- #77788 (BTreeMap: fix gdb provider on BTreeMap with ZST keys or values)
- #77795 (Codegen backend interface refactor)
- #77808 (Moved the main `impl` for FnCtxt to its own file.)
- #77817 (Switch rustdoc from `clean::Stability` to `rustc_attr::Stability`)
- #77829 (bootstrap: only use compiler-builtins-c if they exist)
- #77870 (Use intra-doc links for links to module-level docs)
- #77897 (Move `Strip` into a separate rustdoc pass)
Failed merges:
- #77879 (Provide better documentation and help messages for x.py setup)
- #77902 (Include aarch64-pc-windows-msvc in the dist manifests)
r? `@ghost`
Switch rustdoc from `clean::Stability` to `rustc_attr::Stability`
This gives greater type safety and is less work to maintain on the rustdoc end. It also makes rustdoc more consistent with rustc.
Noticed this while working on https://github.com/rust-lang/rust/issues/76998.
- Remove `clean::Stability` in favor of `rustc_attr::Stability`
- Remove `impl Clean for Stability`; it's no longer necessary
r? @GuillaumeGomez
cc @petrochenkov
Moved the main `impl` for FnCtxt to its own file.
Resolves#77085 without breaking the API of the `FnCtxt` struct.
This is a solution to the file length being over 3000 (see issue #60302).
The other solution to the file length is
1. to change the API of this struct by
2. encapulating certain fields of the struct into other structs.
Codegen backend interface refactor
This moves several things away from the codegen backend to rustc_interface. There are a few behavioral changes where previously the incremental cache (incorrectly) wouldn't get finalized, but now it does. See the individual commit messages.
Add LLVM flags to limit DWARF version to 2 on BSD
This has been a thorn in my side for a while, I can finally generate flamegraphs of rust programs on bsd again. This fixes dtrace profiling on freebsd, I think it might help with lldb as well but I can't test that because my current rust-lldb setup is messed up.
I'm limiting the dwarf version to 2 on all bsd's (netbsd/openbsd/freebsd) since it looks like this applies to all of them, but I have only tested on freebsd.
Let me know if there's anything I can improve!
---
Currently on FreeBSD dtrace profiling does not work and shows jumbled/incorrect
symbols in the backtraces. FreeBSD does not support the latest versions of DWARF
in dtrace (and lldb?) yet, and needs to be limited to DWARF2 in the same way as macos.
This adds an is_like_bsd flag since it was missing. NetBSD/OpenBSD/FreeBSD all
match this.
This effectively copies #11864 but targets FreeBSD instead of macos.
Refactor AST pretty-printing to allow skipping insertion of extra parens
Fixes#75734
Makes progress towards #43081
Unblocks PR #76130
When pretty-printing an AST node, we may insert additional parenthesis
to ensure that precedence is properly preserved in code we output.
However, the proc macro implementation relies on comparing a
pretty-printed AST node to the captured `TokenStream`. Inserting extra
parenthesis changes the structure of the reparsed `TokenStream`, making
the comparison fail.
This PR refactors the AST pretty-printing code to allow skipping the
insertion of additional parenthesis. Several freestanding methods are
moved to trait methods on `PrintState`, which keep track of an internal
`insert_extra_parens` flag. This flag is normally `true`, but we expose
a public method which allows pretty-printing a nonterminal with
`insert_extra_parens = false`.
To avoid changing the public interface of `rustc_ast_pretty`, the
freestanding `_to_string` methods are changed to delegate to a
newly-crated `State`. The main pretty-printing code is moved to a new
`state` module to ensure that it does not accidentally call any of these
public helper functions (instead, the internal functions with the same
name should be used).
A promoted inherits all scopes from the parent body. At the same time,
almost all statements and terminators inside the promoted body so far
refer only to one of those scopes: the outermost one.
Instead of inheriting all scopes, inherit only a single scope
corresponding to the location of the promoted, making sure that there
are no references to other scopes.
Replace absolute paths with relative ones
Modern compilers allow reaching external crates
like std or core via relative paths in modules
outside of lib.rs and main.rs.
Replace trivial bool matches with the `matches!` macro
This derives `PartialEq` on one enum (and two structs it contains) to enable the `==` operator for it. If there's some downside to this, I could respin with the `matches!` macro instead.
Certain platforms need to limit the DWARF version emitted (oxs, *bsd). This
change adds a dwarf_version entry to the options that allows a platform to
specify the dwarf version to use. By default this option is none and the default
DWARF version is selected.
Also adds an option for printing Option<u32> json keys
Use tracing spans in rustc_trait_selection
Spans are very helpful when debugging this code. It's also hot enough to make a good benchmark.
r? `@oli-obk`
Mono collector: replace pair of ints with Range
I found the initial PR (#33171) that introduced this piece of code but I didn't find any information about why a tuple was preferred over a `Range<usize>`.
I'm hoping there are no technical reasons to not do this.
Remove unnecessary unsafe block around calls to discriminant_value
Since 63793 the discriminant_value intrinsic is safe to call. Remove
unnecessary unsafe block around calls to this intrinsic in built-in
derive macros.
Use llvm::computeLTOCacheKey to determine post-ThinLTO CGU reuse
During incremental ThinLTO compilation, we attempt to re-use the
optimized (post-ThinLTO) bitcode file for a module if it is 'safe' to do
so.
Up until now, 'safe' has meant that the set of modules that our current
modules imports from/exports to is unchanged from the previous
compilation session. See PR #67020 and PR #71131 for more details.
However, this turns out be insufficient to guarantee that it's safe
to reuse the post-LTO module (i.e. that optimizing the pre-LTO module
would produce the same result). When LLVM optimizes a module during
ThinLTO, it may look at other information from the 'module index', such
as whether a (non-imported!) global variable is used. If this
information changes between compilation runs, we may end up re-using an
optimized module that (for example) had dead-code elimination run on a
function that is now used by another module.
Fortunately, LLVM implements its own ThinLTO module cache, which is used
when ThinLTO is performed by a linker plugin (e.g. when clang is used to
compile a C proect). Using this cache directly would require extensive
refactoring of our code - but fortunately for us, LLVM provides a
function that does exactly what we need.
The function `llvm::computeLTOCacheKey` is used to compute a SHA-1 hash
from all data that might influence the result of ThinLTO on a module.
In addition to the module imports/exports that we manually track, it
also hashes information about global variables (e.g. their liveness)
which might be used during optimization. By using this function, we
shouldn't have to worry about new LLVM passes breaking our module re-use
behavior.
In LLVM, the output of this function forms part of the filename used to
store the post-ThinLTO module. To keep our current filename structure
intact, this PR just writes out the mapping 'CGU name -> Hash' to a
file. To determine if a post-LTO module should be reused, we compare
hashes from the previous session.
This should unblock PR #75199 - by sheer chance, it seems to have hit
this issue due to the particular CGU partitioning and optimization
decisions that end up getting made.
Recognize discriminant reads as no-ops in RemoveNoopLandingPads
The cleanup blocks often contain read of discriminants. Teach
RemoveNoopLandingPads to recognize them as no-ops to remove
additional no-op landing pads.
Fixes#74616
Makes progress towards #43081
Unblocks PR #76130
When pretty-printing an AST node, we may insert additional parenthesis
to ensure that precedence is properly preserved in code we output.
However, the proc macro implementation relies on comparing a
pretty-printed AST node to the captured `TokenStream`. Inserting extra
parenthesis changes the structure of the reparsed `TokenStream`, making
the comparison fail.
This PR refactors the AST pretty-printing code to allow skipping the
insertion of additional parenthesis. Several freestanding methods are
moved to trait methods on `PrintState`, which keep track of an internal
`insert_extra_parens` flag. This flag is normally `true`, but we expose
a public method which allows pretty-printing a nonterminal with
`insert_extra_parens = false`.
To avoid changing the public interface of `rustc_ast_pretty`, the
freestanding `_to_string` methods are changed to delegate to a
newly-crated `State`. The main pretty-printing code is moved to a new
`state` module to ensure that it does not accidentally call any of these
public helper functions (instead, the internal functions with the same
name should be used).
Depending on if upvar_tys inferred or not, we were returning either an
inference variable which later resolves to a tuple or else the upvar tys
themselves
Co-authored-by: Roxane Fruytier <roxane.fruytier@hotmail.com>
This commit allows us to decide the number of captures required after
completing capture ananysis, which is required as part of implementing
RFC-2229.
Co-authored-by: Aman Arora <me@aman-arora.com>
Co-authored-by: Jenny Wills <wills.jenniferg@gmail.com>
Add -Z codegen-backend dylib to deps
When the codegen-backend dylib changes, the program should be rebuilt.
---
Unfortunately I was unable to test this works locally due to running into a TLS issue when running the custom backend, `thread 'rustc' panicked at 'no ImplicitCtxt stored in tls', compiler/rustc_middle/src/ty/context.rs:1750:54`, which seems similar to https://github.com/rust-lang/rust/issues/62717 but has a completely different cause and backtrace.
`@eddyb` said to ping `@Mark-Simulacrum` about what they think about this, so, ping!
This is a solution to the file length being over 3000, something Clippy has a problem with.
The other solution to the file length is
1. to change the API of this struct by
2. encapulating certain fields of the struct into other structs.
Since 63793 the discriminant_value intrinsic is safe to call. Remove
unnecessary unsafe block around calls to this intrinsic in built-in
derive macros.
Provide structured suggestions when finding structs when expecting a trait
When finding an ADT in a trait object definition provide some solutions. Fix#45817.
Given `<Param as Trait>::Assoc: Ty` suggest `Param: Trait<Assoc = Ty>`. Fix#75829.
Allow generic parameters in intra-doc links
Fixes#62834.
---
The contents of the generics will be mostly ignored (except for warning
if fully-qualified syntax is used, which is currently unsupported in
intra-doc links - see issue #74563).
* Allow links like `Vec<T>`, `Result<T, E>`, and `Option<Box<T>>`
* Allow links like `Vec::<T>::new()`
* Warn on
* Unbalanced angle brackets (e.g. `Vec<T` or `Vec<T>>`)
* Missing type to apply generics to (`<T>` or `<Box<T>>`)
* Use of fully-qualified syntax (`<Vec as IntoIterator>::into_iter`)
* Invalid path separator (`Vec:<T>:new`)
* Too many angle brackets (`Vec<<T>>`)
* Empty angle brackets (`Vec<>`)
Note that this implementation *does* allow some constructs that aren't
valid in the actual Rust syntax, for example `Box::<T>new()`. That may
not be supported in rustdoc in the future; it is an implementation
detail.
They were not formatted correctly, so rustdoc was interpreting some
parts as code. Also cleaned up some other query docs that weren't
causing issues, but were formatted incorrectly.
