Existing names for values of this type are `sess`, `parse_sess`,
`parse_session`, and `ps`. `sess` is particularly annoying because
that's also used for `Session` values, which are often co-located, and
it can be difficult to know which type a value named `sess` refers to.
(That annoyance is the main motivation for this change.) `psess` is nice
and short, which is good for a name used this much.
The commit also renames some `parse_sess_created` values as
`psess_created`.
If we abort immediately after complaining about the obsolete `impl Trait
for ..` syntax, then we avoid reaching HIR lowering. This means we can
use `TyKind::Dummy` instead of `TyKind::Err`.
Currently many diagnostic modifier methods are available on both
`Diagnostic` and `DiagnosticBuilder`. This commit removes most of them
from `Diagnostic`. To minimize the diff size, it keeps them within
`diagnostic.rs` but changes the surrounding `impl Diagnostic` block to
`impl DiagnosticBuilder`. (I intend to move things around later, to give
a more sensible code layout.)
`Diagnostic` keeps a few methods that it still needs, like `sub`,
`arg`, and `replace_args`.
The `forward!` macro, which defined two additional methods per call
(e.g. `note` and `with_note`), is replaced by the `with_fn!` macro,
which defines one additional method per call (e.g. `with_note`). It's
now also only used when necessary -- not all modifier methods currently
need a `with_*` form. (New ones can be easily added as necessary.)
All this also requires changing `trait AddToDiagnostic` so its methods
take `DiagnosticBuilder` instead of `Diagnostic`, which leads to many
mechanical changes. `SubdiagnosticMessageOp` gains a type parameter `G`.
There are three subdiagnostics -- `DelayedAtWithoutNewline`,
`DelayedAtWithNewline`, and `InvalidFlushedDelayedDiagnosticLevel` --
that are created within the diagnostics machinery and appended to
external diagnostics. These are handled at the `Diagnostic` level, which
means it's now hard to construct them via `derive(Diagnostic)`, so
instead we construct them by hand. This has no effect on what they look
like when printed.
There are lots of new `allow` markers for `untranslatable_diagnostics`
and `diagnostics_outside_of_impl`. This is because
`#[rustc_lint_diagnostics]` annotations were present on the `Diagnostic`
modifier methods, but missing from the `DiagnosticBuilder` modifier
methods. They're now present.
This makes it more like `hir::TyKind::Err`, and avoids a
`span_delayed_bug` call in `LoweringContext::lower_ty_direct`.
It also requires adding `ast::TyKind::Dummy`, now that
`ast::TyKind::Err` can't be used for that purpose in the absence of an
error emission.
There are a couple of cases that aren't as neat as I would have liked,
marked with `FIXME` comments.
Provide more suggestions on invalid equality where bounds
```
error: equality constraints are not yet supported in `where` clauses
--> $DIR/equality-bound.rs:50:9
|
LL | IntoIterator::Item = A
| ^^^^^^^^^^^^^^^^^^^^^^ not supported
|
= note: see issue #20041 <https://github.com/rust-lang/rust/issues/20041> for more information
help: if `IntoIterator::Item` is an associated type you're trying to set, use the associated type binding syntax
|
LL ~ fn from_iter<T: IntoIterator<Item = A>>(_: T) -> Self
LL ~
|
error: equality constraints are not yet supported in `where` clauses
--> $DIR/equality-bound.rs:63:9
|
LL | T::Item = A
| ^^^^^^^^^^^ not supported
|
= note: see issue #20041 <https://github.com/rust-lang/rust/issues/20041> for more information
help: if `IntoIterator::Item` is an associated type you're trying to set, use the associated type binding syntax
|
LL ~ fn from_iter<T: IntoIterator<Item = A>>(_: T) -> Self
LL ~
|
```
Fix#68982.
Invert diagnostic lints.
That is, change `diagnostic_outside_of_impl` and `untranslatable_diagnostic` from `allow` to `deny`, because more than half of the compiler has been converted to use translated diagnostics.
This commit removes more `deny` attributes than it adds `allow` attributes, which proves that this change is warranted.
r? ````@davidtwco````
```
error: equality constraints are not yet supported in `where` clauses
--> $DIR/equality-bound.rs:50:9
|
LL | IntoIterator::Item = A,
| ^^^^^^^^^^^^^^^^^^^^^^ not supported
|
= note: see issue #20041 <https://github.com/rust-lang/rust/issues/20041> for more information
help: if `IntoIterator::Item` is an associated type you're trying to set, use the associated type binding syntax
|
LL ~ fn from_iter<T: IntoIterator<Item = A>>(_: T) -> Self
LL | where
LL ~
|
error: equality constraints are not yet supported in `where` clauses
--> $DIR/equality-bound.rs:63:9
|
LL | T::Item = A,
| ^^^^^^^^^^^ not supported
|
= note: see issue #20041 <https://github.com/rust-lang/rust/issues/20041> for more information
help: if `IntoIterator::Item` is an associated type you're trying to set, use the associated type binding syntax
|
LL ~ fn from_iter<T: IntoIterator<Item = A>>(_: T) -> Self
LL | where
LL ~
|
```
Fix#68982.
That is, change `diagnostic_outside_of_impl` and
`untranslatable_diagnostic` from `allow` to `deny`, because more than
half of the compiler has be converted to use translated diagnostics.
This commit removes more `deny` attributes than it adds `allow`
attributes, which proves that this change is warranted.
Error codes are integers, but `String` is used everywhere to represent
them. Gross!
This commit introduces `ErrCode`, an integral newtype for error codes,
replacing `String`. It also introduces a constant for every error code,
e.g. `E0123`, and removes the `error_code!` macro. The constants are
imported wherever used with `use rustc_errors::codes::*`.
With the old code, we have three different ways to specify an error code
at a use point:
```
error_code!(E0123) // macro call
struct_span_code_err!(dcx, span, E0123, "msg"); // bare ident arg to macro call
\#[diag(name, code = "E0123")] // string
struct Diag;
```
With the new code, they all use the `E0123` constant.
```
E0123 // constant
struct_span_code_err!(dcx, span, E0123, "msg"); // constant
\#[diag(name, code = E0123)] // constant
struct Diag;
```
The commit also changes the structure of the error code definitions:
- `rustc_error_codes` now just defines a higher-order macro listing the
used error codes and nothing else.
- Because that's now the only thing in the `rustc_error_codes` crate, I
moved it into the `lib.rs` file and removed the `error_codes.rs` file.
- `rustc_errors` uses that macro to define everything, e.g. the error
code constants and the `DIAGNOSTIC_TABLES`. This is in its new
`codes.rs` file.
Suggest Upgrading Compiler for Gated Features
This PR addresses #117318
I have a few questions:
1. Do we want to specify the current version and release date of the compiler? I have added this in via environment variables, which I found in the code for the rustc cli where it handles the `--version` flag
a. How can I handle the changing message in the tests?
3. Do we want to only show this message when the compiler is old?
a. How can we determine when the compiler is old?
I'll wait until we figure out the message to bless the tests
Allow `~const` on associated type bounds again
This follows from [this Zulip discussion](https://rust-lang.zulipchat.com/#narrow/stream/419616-t-compiler.2Fproject-const-traits/topic/projections.20on.20.28~.29const.20Trait.20.26.20.28~.29const.20assoc.20ty.20bounds).
Basically in my opinion, it makes sense to allow `~const` on associated type bounds again since they're quite useful even though we haven't implemented the proposed syntax `<Ty as ~const Trait>::Proj`/`<Ty as const Trait>::Proj` yet; that can happen as a follow-up.
This already allows more code to compile since `T::Assoc` where `T` is a type parameter and where the predicate `<T as ~const Trait>` is in the environment gets elaborated to (pseudo) `<T as ~const Trait>::Assoc`.
```rs
#[const_trait]
trait Trait {
type Assoc: ~const Trait;
fn func() -> i32;
}
const fn function<T: ~const Trait>() -> i32 {
T::Assoc::func()
}
```
`~const` associated type bounds also work together with `const` bounds:
```rs
struct Type<const N: i32>;
fn procedure<T: const Trait>() -> Type<{ T::Assoc::func() }> { // `Trait` comes from above
Type
}
```
NB: This PR also starts allowing `~const` bounds in the generics and the where-clause of trait associated types since it's trivial to support them. However, I don't know if those bounds are actually useful. Maybe we should continue to reject them?
For reference, it wouldn't make any sense to allow `~const Trait` in GACs (generic associated constants, `generic_const_items`) because they'd be absolutely useless (contrary to `const Trait`).
~~[``@]rustbot`` ping project-const-traits~~
r? project-const-traits
In #119606 I added them and used a `_mv` suffix, but that wasn't great.
A `with_` prefix has three different existing uses.
- Constructors, e.g. `Vec::with_capacity`.
- Wrappers that provide an environment to execute some code, e.g.
`with_session_globals`.
- Consuming chaining methods, e.g. `Span::with_{lo,hi,ctxt}`.
The third case is exactly what we want, so this commit changes
`DiagnosticBuilder::foo_mv` to `DiagnosticBuilder::with_foo`.
Thanks to @compiler-errors for the suggestion.
This works for most of its call sites. This is nice, because `emit` very
much makes sense as a consuming operation -- indeed,
`DiagnosticBuilderState` exists to ensure no diagnostic is emitted
twice, but it uses runtime checks.
For the small number of call sites where a consuming emit doesn't work,
the commit adds `DiagnosticBuilder::emit_without_consuming`. (This will
be removed in subsequent commits.)
Likewise, `emit_unless` becomes consuming. And `delay_as_bug` becomes
consuming, while `delay_as_bug_without_consuming` is added (which will
also be removed in subsequent commits.)
All this requires significant changes to `DiagnosticBuilder`'s chaining
methods. Currently `DiagnosticBuilder` method chaining uses a
non-consuming `&mut self -> &mut Self` style, which allows chaining to
be used when the chain ends in `emit()`, like so:
```
struct_err(msg).span(span).emit();
```
But it doesn't work when producing a `DiagnosticBuilder` value,
requiring this:
```
let mut err = self.struct_err(msg);
err.span(span);
err
```
This style of chaining won't work with consuming `emit` though. For
that, we need to use to a `self -> Self` style. That also would allow
`DiagnosticBuilder` production to be chained, e.g.:
```
self.struct_err(msg).span(span)
```
However, removing the `&mut self -> &mut Self` style would require that
individual modifications of a `DiagnosticBuilder` go from this:
```
err.span(span);
```
to this:
```
err = err.span(span);
```
There are *many* such places. I have a high tolerance for tedious
refactorings, but even I gave up after a long time trying to convert
them all.
Instead, this commit has it both ways: the existing `&mut self -> Self`
chaining methods are kept, and new `self -> Self` chaining methods are
added, all of which have a `_mv` suffix (short for "move"). Changes to
the existing `forward!` macro lets this happen with very little
additional boilerplate code. I chose to add the suffix to the new
chaining methods rather than the existing ones, because the number of
changes required is much smaller that way.
This doubled chainging is a bit clumsy, but I think it is worthwhile
because it allows a *lot* of good things to subsequently happen. In this
commit, there are many `mut` qualifiers removed in places where
diagnostics are emitted without being modified. In subsequent commits:
- chaining can be used more, making the code more concise;
- more use of chaining also permits the removal of redundant diagnostic
APIs like `struct_err_with_code`, which can be replaced easily with
`struct_err` + `code_mv`;
- `emit_without_diagnostic` can be removed, which simplifies a lot of
machinery, removing the need for `DiagnosticBuilderState`.
`Diagnostic` has 40 methods that return `&mut Self` and could be
considered setters. Four of them have a `set_` prefix. This doesn't seem
necessary for a type that implements the builder pattern. This commit
removes the `set_` prefixes on those four methods.
Add support for `for await` loops
This adds support for `for await` loops. This includes parsing, desugaring in AST->HIR lowering, and adding some support functions to the library.
Given a loop like:
```rust
for await i in iter {
...
}
```
this is desugared to something like:
```rust
let mut iter = iter.into_async_iter();
while let Some(i) = loop {
match core::pin::Pin::new(&mut iter).poll_next(cx) {
Poll::Ready(i) => break i,
Poll::Pending => yield,
}
} {
...
}
```
This PR also adds a basic `IntoAsyncIterator` trait. This is partly for symmetry with the way `Iterator` and `IntoIterator` work. The other reason is that for async iterators it's helpful to have a place apart from the data structure being iterated over to store state. `IntoAsyncIterator` gives us a good place to do this.
I've gated this feature behind `async_for_loop` and opened #118898 as the feature tracking issue.
r? `@compiler-errors`
Refactor AST trait bound modifiers
Instead of having two types to represent trait bound modifiers in the parser / the AST (`parser::ty::BoundModifiers` & `ast::TraitBoundModifier`), only to map one to the other later, just use `parser::ty::BoundModifiers` (moved & renamed to `ast::TraitBoundModifiers`).
The struct type is more extensible and easier to deal with (see [here](https://github.com/rust-lang/rust/pull/119099/files#r1430749981) and [here](https://github.com/rust-lang/rust/pull/119099/files#r1430752116) for context) since it more closely models what it represents: A compound of two kinds of modifiers, constness and polarity. Modeling this as an enum (the now removed `ast::TraitBoundModifier`) meant one had to add a new variant per *combination* of modifier kind, which simply isn't scalable and which lead to a lot of explicit non-DRY matches.
NB: `hir::TraitBoundModifier` being an enum is fine since HIR doesn't need to worry representing invalid modifier kind combinations as those get rejected during AST validation thereby immensely cutting down the number of possibilities.
Simple modification of `non_lifetime_binders`'s diagnostic information to adapt to type binders
fixes#119067
Replace diagnostic information "lifetime bounds cannot be used in this context" to "bounds cannot be used in this context".
```rust
#![allow(incomplete_features)]
#![feature(non_lifetime_binders)]
trait Trait {}
trait Trait2
where for <T: Trait> ():{}
//~^ ERROR bounds cannot be used in this context
```
Properly reject `default` on free const items
Fixes#117791.
Technically speaking, this is a breaking change but I doubt it will lead to any real-world regressions (maybe in some macro-trickery crates?). Doing a crater run probably isn't worth it.
